Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- smartctl 6.4 2014-10-07 r4002 [x86_64-linux-4.2.0-18-generic] (local build)
- Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org
- === START OF INFORMATION SECTION ===
- Model Family: Western Digital Scorpio Blue Serial ATA
- Device Model: WDC WD3200BEVT-75A23T0
- Serial Number: WD-WXD1AB0E4301
- LU WWN Device Id: 5 0014ee 600b14cb7
- Firmware Version: 01.01A01
- User Capacity: 320,072,933,376 bytes [320 GB]
- Sector Size: 512 bytes logical/physical
- Rotation Rate: 5400 rpm
- Device is: In smartctl database [for details use: -P show]
- ATA Version is: ATA8-ACS (minor revision not indicated)
- SATA Version is: SATA 2.6, 3.0 Gb/s
- Local Time is: Sat Nov 14 06:47:28 2015 IST
- SMART support is: Available - device has SMART capability.
- SMART support is: Enabled
- === START OF READ SMART DATA SECTION ===
- SMART overall-health self-assessment test result: PASSED
- General SMART Values:
- Offline data collection status: (0x00) Offline data collection activity
- was never started.
- Auto Offline Data Collection: Disabled.
- Self-test execution status: ( 0) The previous self-test routine completed
- without error or no self-test has ever
- been run.
- Total time to complete Offline
- data collection: ( 8160) seconds.
- Offline data collection
- capabilities: (0x7b) SMART execute Offline immediate.
- Auto Offline data collection on/off support.
- Suspend Offline collection upon new
- command.
- Offline surface scan supported.
- Self-test supported.
- Conveyance Self-test supported.
- Selective Self-test supported.
- SMART capabilities: (0x0003) Saves SMART data before entering
- power-saving mode.
- Supports SMART auto save timer.
- Error logging capability: (0x01) Error logging supported.
- General Purpose Logging supported.
- Short self-test routine
- recommended polling time: ( 2) minutes.
- Extended self-test routine
- recommended polling time: ( 97) minutes.
- Conveyance self-test routine
- recommended polling time: ( 5) minutes.
- SCT capabilities: (0x7037) SCT Status supported.
- SCT Feature Control supported.
- SCT Data Table supported.
- SMART Attributes Data Structure revision number: 16
- Vendor Specific SMART Attributes with Thresholds:
- ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
- 1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0
- 3 Spin_Up_Time 0x0027 155 148 021 Pre-fail Always - 1216
- 4 Start_Stop_Count 0x0032 099 099 000 Old_age Always - 1626
- 5 Reallocated_Sector_Ct 0x0033 150 150 140 Pre-fail Always - 541
- 7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0
- 9 Power_On_Hours 0x0032 099 099 000 Old_age Always - 1259
- 10 Spin_Retry_Count 0x0032 100 100 000 Old_age Always - 0
- 11 Calibration_Retry_Count 0x0032 100 100 000 Old_age Always - 0
- 12 Power_Cycle_Count 0x0032 099 099 000 Old_age Always - 1618
- 191 G-Sense_Error_Rate 0x0032 001 001 000 Old_age Always - 11456
- 192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 48
- 193 Load_Cycle_Count 0x0032 195 195 000 Old_age Always - 16053
- 194 Temperature_Celsius 0x0022 109 082 000 Old_age Always - 34
- 196 Reallocated_Event_Count 0x0032 085 085 000 Old_age Always - 115
- 197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0
- 198 Offline_Uncorrectable 0x0030 100 253 000 Old_age Offline - 0
- 199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0
- 200 Multi_Zone_Error_Rate 0x0008 100 253 000 Old_age Offline - 0
- 240 Head_Flying_Hours 0x0032 099 099 000 Old_age Always - 1229
- 241 Total_LBAs_Written 0x0032 200 200 000 Old_age Always - 2465085895
- 242 Total_LBAs_Read 0x0032 200 200 000 Old_age Always - 7164775413
- 254 Free_Fall_Sensor 0x0032 200 200 000 Old_age Always - 0
- SMART Error Log Version: 1
- ATA Error Count: 2003 (device log contains only the most recent five errors)
- CR = Command Register [HEX]
- FR = Features Register [HEX]
- SC = Sector Count Register [HEX]
- SN = Sector Number Register [HEX]
- CL = Cylinder Low Register [HEX]
- CH = Cylinder High Register [HEX]
- DH = Device/Head Register [HEX]
- DC = Device Command Register [HEX]
- ER = Error register [HEX]
- ST = Status register [HEX]
- Powered_Up_Time is measured from power on, and printed as
- DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
- SS=sec, and sss=millisec. It "wraps" after 49.710 days.
- Error 2003 occurred at disk power-on lifetime: 1259 hours (52 days + 11 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 40 51 08 d8 01 00 e0 Error: UNC 8 sectors at LBA = 0x000001d8 = 472
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- c8 00 08 d8 01 00 e0 08 00:00:42.483 READ DMA
- Error 2002 occurred at disk power-on lifetime: 1259 hours (52 days + 11 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 40 51 08 d8 01 00 e0 Error: UNC 8 sectors at LBA = 0x000001d8 = 472
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- c8 00 08 d8 01 00 e0 08 00:00:39.849 READ DMA
- Error 2001 occurred at disk power-on lifetime: 1259 hours (52 days + 11 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 40 51 08 d8 01 00 e0 Error: UNC 8 sectors at LBA = 0x000001d8 = 472
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- c8 00 08 d8 01 00 e0 08 00:00:27.689 READ DMA
- ec 00 00 00 00 00 a0 08 00:00:27.645 IDENTIFY DEVICE
- ef 03 46 00 00 00 a0 08 00:00:27.638 SET FEATURES [Set transfer mode]
- Error 2000 occurred at disk power-on lifetime: 1259 hours (52 days + 11 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER ST SC SN CL CH DH
- -- -- -- -- -- -- --
- 40 51 08 d8 01 00 e0 Error: UNC 8 sectors at LBA = 0x000001d8 = 472
- Commands leading to the command that caused the error were:
- CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
- -- -- -- -- -- -- -- -- ---------------- --------------------
- c8 00 08 d8 01 00 e0 08 00:00:25.221 READ DMA
- c8 00 08 d0 01 00 e0 08 00:00:25.221 READ DMA
- c8 00 08 c8 01 00 e0 08 00:00:25.221 READ DMA
- c8 00 08 c0 01 00 e0 08 00:00:25.220 READ DMA
- SMART Self-test log structure revision number 1
- Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
- # 1 Short offline Completed: read failure 20% 784 5908360
- # 2 Short offline Completed without error 00% 582 -
- # 3 Short offline Interrupted (host reset) 80% 574 -
- # 4 Short offline Completed without error 00% 0 -
- SMART Selective self-test log data structure revision number 1
- SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
- 1 0 0 Not_testing
- 2 0 0 Not_testing
- 3 0 0 Not_testing
- 4 0 0 Not_testing
- 5 0 0 Not_testing
- Selective self-test flags (0x0):
- After scanning selected spans, do NOT read-scan remainder of disk.
- If Selective self-test is pending on power-up, resume after 0 minute delay.
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement