Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- [ 0.000000] Initializing cgroup subsys cpuset
- [ 0.000000] Initializing cgroup subsys cpu
- [ 0.000000] Linux version 3.4.9-gentoo (root@livecd) (gcc version 4.5.4 (Gentoo 4.5.4 p1.0, pie-0.4.7) ) #5 SMP Thu Oct 18 18:00:05 Local time zone must be set--see zic
- [ 0.000000] Command line: root=/dev/sdb3
- [ 0.000000] BIOS-provided physical RAM map:
- [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009bc00 (usable)
- [ 0.000000] BIOS-e820: 000000000009bc00 - 00000000000a0000 (reserved)
- [ 0.000000] BIOS-e820: 00000000000e6000 - 0000000000100000 (reserved)
- [ 0.000000] BIOS-e820: 0000000000100000 - 00000000afe90000 (usable)
- [ 0.000000] BIOS-e820: 00000000afe90000 - 00000000afe9e000 (ACPI data)
- [ 0.000000] BIOS-e820: 00000000afe9e000 - 00000000afee0000 (ACPI NVS)
- [ 0.000000] BIOS-e820: 00000000afee0000 - 00000000aff00000 (reserved)
- [ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
- [ 0.000000] NX (Execute Disable) protection: active
- [ 0.000000] DMI present.
- [ 0.000000] DMI: MICRO-STAR INTERNATIONAL CO.,LTD MS-7551/785GT-E63(MS-7551), BIOS V28.5 09/09/2010
- [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
- [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
- [ 0.000000] No AGP bridge found
- [ 0.000000] last_pfn = 0xafe90 max_arch_pfn = 0x400000000
- [ 0.000000] MTRR default type: uncachable
- [ 0.000000] MTRR fixed ranges enabled:
- [ 0.000000] 00000-9FFFF write-back
- [ 0.000000] A0000-EFFFF uncachable
- [ 0.000000] F0000-FFFFF write-protect
- [ 0.000000] MTRR variable ranges enabled:
- [ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
- [ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back
- [ 0.000000] 2 base 0000A0000000 mask FFFFF0000000 write-back
- [ 0.000000] 3 disabled
- [ 0.000000] 4 disabled
- [ 0.000000] 5 disabled
- [ 0.000000] 6 disabled
- [ 0.000000] 7 disabled
- [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
- [ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780
- [ 0.000000] initial memory mapped : 0 - 20000000
- [ 0.000000] Base memory trampoline at [ffff880000096000] 96000 size 20480
- [ 0.000000] Using GB pages for direct mapping
- [ 0.000000] init_memory_mapping: 0000000000000000-00000000afe90000
- [ 0.000000] 0000000000 - 0080000000 page 1G
- [ 0.000000] 0080000000 - 00afe00000 page 2M
- [ 0.000000] 00afe00000 - 00afe90000 page 4k
- [ 0.000000] kernel direct mapping tables up to afe90000 @ 1fffd000-20000000
- [ 0.000000] ACPI: RSDP 00000000000faa20 00014 (v00 ACPIAM)
- [ 0.000000] ACPI: RSDT 00000000afe90000 00040 (v01 7551MS A7551800 20100909 MSFT 00000097)
- [ 0.000000] ACPI: FACP 00000000afe90200 00084 (v01 7551MS A7551800 20100909 MSFT 00000097)
- [ 0.000000] ACPI Warning: Optional field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20120320/tbfadt-579)
- [ 0.000000] ACPI: DSDT 00000000afe905d0 09CCF (v01 A7551 A7551800 00000800 INTL 20051117)
- [ 0.000000] ACPI: FACS 00000000afe9e000 00040
- [ 0.000000] ACPI: APIC 00000000afe90390 0007C (v01 7551MS A7551800 20100909 MSFT 00000097)
- [ 0.000000] ACPI: MCFG 00000000afe90410 0003C (v01 7551MS OEMMCFG 20100909 MSFT 00000097)
- [ 0.000000] ACPI: OEMB 00000000afe9e040 00072 (v01 7551MS A7551800 20100909 MSFT 00000097)
- [ 0.000000] ACPI: SRAT 00000000afe9a2a0 000C0 (v03 AMD FAM_F_10 00000002 AMD 00000001)
- [ 0.000000] ACPI: HPET 00000000afe9a360 00038 (v01 7551MS OEMHPET 20100909 MSFT 00000097)
- [ 0.000000] ACPI: SSDT 00000000afe9a3a0 0088C (v01 A M I POWERNOW 00000001 AMD 00000001)
- [ 0.000000] ACPI: Local APIC address 0xfee00000
- [ 0.000000] SRAT: PXM 0 -> APIC 0x00 -> Node 0
- [ 0.000000] SRAT: PXM 0 -> APIC 0x01 -> Node 0
- [ 0.000000] SRAT: PXM 0 -> APIC 0x02 -> Node 0
- [ 0.000000] SRAT: PXM 0 -> APIC 0x03 -> Node 0
- [ 0.000000] SRAT: Node 0 PXM 0 0-a0000
- [ 0.000000] SRAT: Node 0 PXM 0 100000-c0000000
- [ 0.000000] NUMA: Node 0 [0,a0000) + [100000,afe90000) -> [0,afe90000)
- [ 0.000000] Initmem setup node 0 0000000000000000-00000000afe90000
- [ 0.000000] NODE_DATA [00000000afe8c000 - 00000000afe8ffff]
- [ 0.000000] [ffffea0000000000-ffffea0002bfffff] PMD -> [ffff8800aca00000-ffff8800af5fffff] on node 0
- [ 0.000000] Zone PFN ranges:
- [ 0.000000] DMA 0x00000010 -> 0x00001000
- [ 0.000000] DMA32 0x00001000 -> 0x00100000
- [ 0.000000] Normal empty
- [ 0.000000] Movable zone start PFN for each node
- [ 0.000000] Early memory PFN ranges
- [ 0.000000] 0: 0x00000010 -> 0x0000009b
- [ 0.000000] 0: 0x00000100 -> 0x000afe90
- [ 0.000000] On node 0 totalpages: 720411
- [ 0.000000] DMA zone: 64 pages used for memmap
- [ 0.000000] DMA zone: 5 pages reserved
- [ 0.000000] DMA zone: 3910 pages, LIFO batch:0
- [ 0.000000] DMA32 zone: 11195 pages used for memmap
- [ 0.000000] DMA32 zone: 705237 pages, LIFO batch:31
- [ 0.000000] ACPI: PM-Timer IO Port: 0x808
- [ 0.000000] ACPI: Local APIC address 0xfee00000
- [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x84] disabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x85] disabled)
- [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
- [ 0.000000] IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
- [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
- [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
- [ 0.000000] ACPI: IRQ0 used by override.
- [ 0.000000] ACPI: IRQ2 used by override.
- [ 0.000000] ACPI: IRQ9 used by override.
- [ 0.000000] Using ACPI (MADT) for SMP configuration information
- [ 0.000000] ACPI: HPET id: 0x8300 base: 0xfed00000
- [ 0.000000] SMP: Allowing 6 CPUs, 2 hotplug CPUs
- [ 0.000000] nr_irqs_gsi: 40
- [ 0.000000] PM: Registered nosave memory: 000000000009b000 - 000000000009c000
- [ 0.000000] PM: Registered nosave memory: 000000000009c000 - 00000000000a0000
- [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e6000
- [ 0.000000] PM: Registered nosave memory: 00000000000e6000 - 0000000000100000
- [ 0.000000] Allocating PCI resources starting at aff00000 (gap: aff00000:50000000)
- [ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:6 nr_node_ids:1
- [ 0.000000] PERCPU: Embedded 26 pages/cpu @ffff8800afc00000 s77056 r8192 d21248 u262144
- [ 0.000000] pcpu-alloc: s77056 r8192 d21248 u262144 alloc=1*2097152
- [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 - -
- [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 709147
- [ 0.000000] Policy zone: DMA32
- [ 0.000000] Kernel command line: root=/dev/sdb3
- [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
- [ 0.000000] Checking aperture...
- [ 0.000000] No AGP bridge found
- [ 0.000000] Node 0: aperture @ e3fa000000 size 32 MB
- [ 0.000000] Aperture beyond 4GB. Ignoring.
- [ 0.000000] Memory: 2821188k/2882112k available (7602k kernel code, 468k absent, 60456k reserved, 5362k data, 576k init)
- [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
- [ 0.000000] Hierarchical RCU implementation.
- [ 0.000000] NR_IRQS:4352 nr_irqs:728 16
- [ 0.000000] Console: colour VGA+ 80x25
- [ 0.000000] console [tty0] enabled
- [ 0.000000] hpet clockevent registered
- [ 0.000000] Fast TSC calibration using PIT
- [ 0.001000] Detected 3000.093 MHz processor.
- [ 0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 6000.18 BogoMIPS (lpj=3000093)
- [ 0.000096] pid_max: default: 32768 minimum: 301
- [ 0.000156] Security Framework initialized
- [ 0.000201] SELinux: Initializing.
- [ 0.000249] SELinux: Starting in permissive mode
- [ 0.000460] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
- [ 0.002577] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
- [ 0.003630] Mount-cache hash table entries: 256
- [ 0.003880] Initializing cgroup subsys cpuacct
- [ 0.003924] Initializing cgroup subsys freezer
- [ 0.003987] tseg: 0000000000
- [ 0.003998] CPU: Physical Processor ID: 0
- [ 0.004041] CPU: Processor Core ID: 0
- [ 0.004095] mce: CPU supports 6 MCE banks
- [ 0.004142] LVT offset 0 assigned for vector 0xf9
- [ 0.004232] ACPI: Core revision 20120320
- [ 0.013124] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
- [ 0.023163] CPU0: AMD Athlon(tm) II X4 640 Processor stepping 03
- [ 0.124961] Performance Events: AMD PMU driver.
- [ 0.125031] ... version: 0
- [ 0.125074] ... bit width: 48
- [ 0.125117] ... generic registers: 4
- [ 0.125160] ... value mask: 0000ffffffffffff
- [ 0.125203] ... max period: 00007fffffffffff
- [ 0.125247] ... fixed-purpose events: 0
- [ 0.125289] ... event mask: 000000000000000f
- [ 0.125457] MCE: In-kernel MCE decoding enabled.
- [ 0.125581] Booting Node 0, Processors #1 #2 #3
- [ 0.165145] Brought up 4 CPUs
- [ 0.165231] Total of 4 processors activated (24000.74 BogoMIPS).
- [ 0.166187] devtmpfs: initialized
- [ 0.166491] PM: Registering ACPI NVS region [mem 0xafe9e000-0xafedffff] (270336 bytes)
- [ 0.166626] RTC time: 15:43:04, date: 12/12/12
- [ 0.166712] NET: Registered protocol family 16
- [ 0.167016] kworker/u:0 used greatest stack depth: 6536 bytes left
- [ 0.168965] node 0 link 0: io port [1000, ffffff]
- [ 0.168969] TOM: 00000000c0000000 aka 3072M
- [ 0.169027] Fam 10h mmconf [mem 0xe0000000-0xefffffff]
- [ 0.169029] node 0 link 0: mmio [a0000, bffff]
- [ 0.169031] node 0 link 0: mmio [c0000000, cfffffff]
- [ 0.169033] node 0 link 0: mmio [d0000000, efffffff] ==> [d0000000, dfffffff]
- [ 0.169035] node 0 link 0: mmio [f0000000, fe8fffff]
- [ 0.169037] node 0 link 0: mmio [fe900000, feafffff]
- [ 0.169039] node 0 link 0: mmio [feb00000, ffefffff]
- [ 0.169041] bus: [00, 07] on node 0 link 0
- [ 0.169042] bus: 00 index 0 [io 0x0000-0xffff]
- [ 0.169044] bus: 00 index 1 [mem 0x000a0000-0x000bffff]
- [ 0.169045] bus: 00 index 2 [mem 0xc0000000-0xdfffffff]
- [ 0.169046] bus: 00 index 3 [mem 0xf0000000-0xfcffffffff]
- [ 0.169128] ACPI: bus type pci registered
- [ 0.169536] kworker/u:0 used greatest stack depth: 5872 bytes left
- [ 0.169587] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
- [ 0.169591] PCI: not using MMCONFIG
- [ 0.169592] PCI: Using configuration type 1 for base access
- [ 0.169593] PCI: Using configuration type 1 for extended access
- [ 0.169818] kworker/u:0 used greatest stack depth: 5440 bytes left
- [ 0.187630] bio: create slab <bio-0> at 0
- [ 0.188266] ACPI: Added _OSI(Module Device)
- [ 0.188314] ACPI: Added _OSI(Processor Device)
- [ 0.188357] ACPI: Added _OSI(3.0 _SCP Extensions)
- [ 0.188401] ACPI: Added _OSI(Processor Aggregator Device)
- [ 0.188979] ACPI: EC: Detected MSI hardware, enabling workarounds.
- [ 0.188981] ACPI: EC: Look up EC in DSDT
- [ 0.189685] ACPI: Executed 4 blocks of module-level executable AML code
- [ 0.192170] ACPI: Interpreter enabled
- [ 0.192219] ACPI: (supports S0 S1 S4 S5)
- [ 0.192381] ACPI: Using IOAPIC for interrupt routing
- [ 0.192443] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
- [ 0.192966] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
- [ 0.220135] ACPI: No dock devices found.
- [ 0.220188] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
- [ 0.220336] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
- [ 0.220486] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7]
- [ 0.220534] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff]
- [ 0.220578] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
- [ 0.220638] pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff]
- [ 0.220698] pci_root PNP0A03:00: host bridge window [mem 0xaff00000-0xdfffffff]
- [ 0.220758] pci_root PNP0A03:00: host bridge window [mem 0xf0000000-0xfebfffff]
- [ 0.220991] PCI host bridge to bus 0000:00
- [ 0.221045] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
- [ 0.221089] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
- [ 0.221134] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
- [ 0.221179] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff]
- [ 0.221224] pci_bus 0000:00: root bus resource [mem 0xaff00000-0xdfffffff]
- [ 0.221268] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfebfffff]
- [ 0.221323] pci 0000:00:00.0: [1022:9601] type 00 class 0x060000
- [ 0.221366] pci 0000:00:01.0: [1022:9602] type 01 class 0x060400
- [ 0.221402] pci 0000:00:05.0: [1022:9605] type 01 class 0x060400
- [ 0.221430] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
- [ 0.221473] pci 0000:00:11.0: [1002:4391] type 00 class 0x010601
- [ 0.221491] pci 0000:00:11.0: reg 10: [io 0xc000-0xc007]
- [ 0.221500] pci 0000:00:11.0: reg 14: [io 0xb000-0xb003]
- [ 0.221509] pci 0000:00:11.0: reg 18: [io 0xa000-0xa007]
- [ 0.221518] pci 0000:00:11.0: reg 1c: [io 0x9000-0x9003]
- [ 0.221526] pci 0000:00:11.0: reg 20: [io 0x8000-0x800f]
- [ 0.221535] pci 0000:00:11.0: reg 24: [mem 0xfe8ffc00-0xfe8fffff]
- [ 0.221589] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
- [ 0.221601] pci 0000:00:12.0: reg 10: [mem 0xfe8fe000-0xfe8fefff]
- [ 0.221668] pci 0000:00:12.1: [1002:4398] type 00 class 0x0c0310
- [ 0.221680] pci 0000:00:12.1: reg 10: [mem 0xfe8fd000-0xfe8fdfff]
- [ 0.221746] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
- [ 0.221764] pci 0000:00:12.2: reg 10: [mem 0xfe8ff800-0xfe8ff8ff]
- [ 0.221842] pci 0000:00:12.2: supports D1 D2
- [ 0.221843] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
- [ 0.221864] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
- [ 0.221888] pci 0000:00:13.0: reg 10: [mem 0xfe8fc000-0xfe8fcfff]
- [ 0.221952] pci 0000:00:13.1: [1002:4398] type 00 class 0x0c0310
- [ 0.221964] pci 0000:00:13.1: reg 10: [mem 0xfe8f7000-0xfe8f7fff]
- [ 0.222030] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
- [ 0.222047] pci 0000:00:13.2: reg 10: [mem 0xfe8ff400-0xfe8ff4ff]
- [ 0.222126] pci 0000:00:13.2: supports D1 D2
- [ 0.222127] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
- [ 0.222151] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
- [ 0.222244] pci 0000:00:14.1: [1002:439c] type 00 class 0x01018a
- [ 0.222260] pci 0000:00:14.1: reg 10: [io 0x0000-0x0007]
- [ 0.222268] pci 0000:00:14.1: reg 14: [io 0x0000-0x0003]
- [ 0.222277] pci 0000:00:14.1: reg 18: [io 0x0000-0x0007]
- [ 0.222285] pci 0000:00:14.1: reg 1c: [io 0x0000-0x0003]
- [ 0.222294] pci 0000:00:14.1: reg 20: [io 0xff00-0xff0f]
- [ 0.222348] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
- [ 0.222368] pci 0000:00:14.2: reg 10: [mem 0xfe8f0000-0xfe8f3fff 64bit]
- [ 0.222430] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
- [ 0.222444] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
- [ 0.222515] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
- [ 0.222554] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310
- [ 0.222566] pci 0000:00:14.5: reg 10: [mem 0xfe8f6000-0xfe8f6fff]
- [ 0.222629] pci 0000:00:18.0: [1022:1200] type 00 class 0x060000
- [ 0.222642] pci 0000:00:18.1: [1022:1201] type 00 class 0x060000
- [ 0.222651] pci 0000:00:18.2: [1022:1202] type 00 class 0x060000
- [ 0.222662] pci 0000:00:18.3: [1022:1203] type 00 class 0x060000
- [ 0.222678] pci 0000:00:18.4: [1022:1204] type 00 class 0x060000
- [ 0.222716] pci 0000:01:05.0: [1002:9710] type 00 class 0x030000
- [ 0.222723] pci 0000:01:05.0: reg 10: [mem 0xd0000000-0xdfffffff pref]
- [ 0.222726] pci 0000:01:05.0: reg 14: [io 0xd000-0xd0ff]
- [ 0.222730] pci 0000:01:05.0: reg 18: [mem 0xfeaf0000-0xfeafffff]
- [ 0.222738] pci 0000:01:05.0: reg 24: [mem 0xfe900000-0xfe9fffff]
- [ 0.222752] pci 0000:01:05.0: supports D1 D2
- [ 0.222790] pci 0000:00:01.0: PCI bridge to [bus 01-01]
- [ 0.222835] pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
- [ 0.222838] pci 0000:00:01.0: bridge window [mem 0xfe900000-0xfeafffff]
- [ 0.222840] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
- [ 0.222874] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
- [ 0.222885] pci 0000:02:00.0: reg 10: [io 0xe800-0xe8ff]
- [ 0.222905] pci 0000:02:00.0: reg 18: [mem 0xfdfff000-0xfdffffff 64bit pref]
- [ 0.222917] pci 0000:02:00.0: reg 20: [mem 0xfdff8000-0xfdffbfff 64bit pref]
- [ 0.222926] pci 0000:02:00.0: reg 30: [mem 0xfebe0000-0xfebfffff pref]
- [ 0.222969] pci 0000:02:00.0: supports D1 D2
- [ 0.222971] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
- [ 0.224921] pci 0000:00:05.0: PCI bridge to [bus 02-02]
- [ 0.224975] pci 0000:00:05.0: bridge window [io 0xe000-0xefff]
- [ 0.224978] pci 0000:00:05.0: bridge window [mem 0xfeb00000-0xfebfffff]
- [ 0.224981] pci 0000:00:05.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
- [ 0.225046] pci 0000:00:14.4: PCI bridge to [bus 03-03] (subtractive decode)
- [ 0.225100] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode)
- [ 0.225101] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
- [ 0.225103] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
- [ 0.225105] pci 0000:00:14.4: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
- [ 0.225107] pci 0000:00:14.4: bridge window [mem 0xaff00000-0xdfffffff] (subtractive decode)
- [ 0.225108] pci 0000:00:14.4: bridge window [mem 0xf0000000-0xfebfffff] (subtractive decode)
- [ 0.225125] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
- [ 0.225296] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
- [ 0.225348] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PC._PRT]
- [ 0.225402] pci0000:00: Requesting ACPI _OSC control (0x1d)
- [ 0.225452] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
- [ 0.225531] ACPI _OSC control for PCIe not granted, disabling ASPM
- [ 0.233755] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 7 *10 11 12 14 15)
- [ 0.234086] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 *10 11 12 14 15)
- [ 0.234385] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 10 *11 12 14 15)
- [ 0.235159] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 7 10 *11 12 14 15)
- [ 0.235456] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 11 12 14 15) *0, disabled.
- [ 0.235822] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 11 12 14 15) *0, disabled.
- [ 0.236195] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 *7 10 11 12 14 15)
- [ 0.236494] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 12 14 15) *0, disabled.
- [ 0.237258] vgaarb: device added: PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks=none
- [ 0.237326] vgaarb: loaded
- [ 0.237368] vgaarb: bridge control possible 0000:01:05.0
- [ 0.237942] SCSI subsystem initialized
- [ 0.238299] libata version 3.00 loaded.
- [ 0.238475] usbcore: registered new interface driver usbfs
- [ 0.238701] usbcore: registered new interface driver hub
- [ 0.238995] usbcore: registered new device driver usb
- [ 0.239713] Advanced Linux Sound Architecture Driver Version 1.0.25.
- [ 0.239764] PCI: Using ACPI for IRQ routing
- [ 0.248150] PCI: pci_cache_line_size set to 64 bytes
- [ 0.248216] reserve RAM buffer: 000000000009bc00 - 000000000009ffff
- [ 0.248218] reserve RAM buffer: 00000000afe90000 - 00000000afffffff
- [ 0.249257] cfg80211: Calling CRDA to update world regulatory domain
- [ 0.249548] NetLabel: Initializing
- [ 0.249596] NetLabel: domain hash size = 128
- [ 0.249639] NetLabel: protocols = UNLABELED CIPSOv4
- [ 0.249713] NetLabel: unlabeled traffic allowed by default
- [ 0.250084] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
- [ 0.250266] hpet0: 4 comparators, 32-bit 14.318180 MHz counter
- [ 0.252352] Switching to clocksource hpet
- [ 0.270728] pnp: PnP ACPI init
- [ 0.270798] ACPI: bus type pnp registered
- [ 0.270939] pnp 00:00: [bus 00-ff]
- [ 0.270941] pnp 00:00: [io 0x0cf8-0x0cff]
- [ 0.270943] pnp 00:00: [io 0x0000-0x0cf7 window]
- [ 0.270944] pnp 00:00: [io 0x0d00-0xffff window]
- [ 0.270947] pnp 00:00: [mem 0x000a0000-0x000bffff window]
- [ 0.270948] pnp 00:00: [mem 0x000d0000-0x000dffff window]
- [ 0.270949] pnp 00:00: [mem 0xaff00000-0xdfffffff window]
- [ 0.270951] pnp 00:00: [mem 0xf0000000-0xfebfffff window]
- [ 0.271167] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
- [ 0.271275] pnp 00:01: [mem 0x00000000-0xffffffffffffffff disabled]
- [ 0.271276] pnp 00:01: [mem 0xb0000000-0xbfffffff]
- [ 0.271505] system 00:01: [mem 0xb0000000-0xbfffffff] has been reserved
- [ 0.271563] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
- [ 0.271619] pnp 00:02: [dma 4]
- [ 0.271621] pnp 00:02: [io 0x0000-0x000f]
- [ 0.271622] pnp 00:02: [io 0x0081-0x0083]
- [ 0.271624] pnp 00:02: [io 0x0087]
- [ 0.271625] pnp 00:02: [io 0x0089-0x008b]
- [ 0.271626] pnp 00:02: [io 0x008f]
- [ 0.271627] pnp 00:02: [io 0x00c0-0x00df]
- [ 0.271827] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
- [ 0.271850] pnp 00:03: [io 0x0070-0x0071]
- [ 0.271868] pnp 00:03: [irq 8]
- [ 0.272080] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
- [ 0.272103] pnp 00:04: [io 0x0061]
- [ 0.272314] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
- [ 0.272337] pnp 00:05: [io 0x00f0-0x00ff]
- [ 0.272356] pnp 00:05: [irq 13]
- [ 0.272569] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
- [ 0.272775] pnp 00:06: [io 0x03f8-0x03ff]
- [ 0.272784] pnp 00:06: [irq 4]
- [ 0.272786] pnp 00:06: [dma 0 disabled]
- [ 0.273027] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
- [ 0.273158] pnp 00:07: [mem 0xfed00000-0xfed003ff]
- [ 0.273363] pnp 00:07: Plug and Play ACPI device, IDs PNP0103 (active)
- [ 0.273494] pnp 00:08: [io 0x0060]
- [ 0.273495] pnp 00:08: [io 0x0064]
- [ 0.273497] pnp 00:08: [mem 0xfec00000-0xfec00fff]
- [ 0.273498] pnp 00:08: [mem 0xfee00000-0xfee00fff]
- [ 0.273749] system 00:08: [mem 0xfec00000-0xfec00fff] could not be reserved
- [ 0.273801] system 00:08: [mem 0xfee00000-0xfee00fff] has been reserved
- [ 0.273848] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
- [ 0.273974] pnp 00:09: [io 0x0010-0x001f]
- [ 0.273975] pnp 00:09: [io 0x0022-0x003f]
- [ 0.273977] pnp 00:09: [io 0x0062-0x0063]
- [ 0.273978] pnp 00:09: [io 0x0065-0x006f]
- [ 0.273979] pnp 00:09: [io 0x0072-0x007f]
- [ 0.273980] pnp 00:09: [io 0x0080]
- [ 0.273981] pnp 00:09: [io 0x0084-0x0086]
- [ 0.273982] pnp 00:09: [io 0x0088]
- [ 0.273984] pnp 00:09: [io 0x008c-0x008e]
- [ 0.273985] pnp 00:09: [io 0x0090-0x009f]
- [ 0.273986] pnp 00:09: [io 0x00a2-0x00bf]
- [ 0.273987] pnp 00:09: [io 0x00b1]
- [ 0.273988] pnp 00:09: [io 0x00e0-0x00ef]
- [ 0.273989] pnp 00:09: [io 0x04d0-0x04d1]
- [ 0.273991] pnp 00:09: [io 0x040b]
- [ 0.273992] pnp 00:09: [io 0x04d6]
- [ 0.273993] pnp 00:09: [io 0x0c00-0x0c01]
- [ 0.273994] pnp 00:09: [io 0x0c14]
- [ 0.273995] pnp 00:09: [io 0x0c50-0x0c51]
- [ 0.273996] pnp 00:09: [io 0x0c52]
- [ 0.273997] pnp 00:09: [io 0x0c6c]
- [ 0.273998] pnp 00:09: [io 0x0c6f]
- [ 0.273999] pnp 00:09: [io 0x0cd0-0x0cd1]
- [ 0.274001] pnp 00:09: [io 0x0cd2-0x0cd3]
- [ 0.274002] pnp 00:09: [io 0x0cd4-0x0cd5]
- [ 0.274003] pnp 00:09: [io 0x0cd6-0x0cd7]
- [ 0.274004] pnp 00:09: [io 0x0cd8-0x0cdf]
- [ 0.274013] pnp 00:09: [io 0x0800-0x089f]
- [ 0.274015] pnp 00:09: [io 0x0000-0xffffffffffffffff disabled]
- [ 0.274016] pnp 00:09: [io 0x0b00-0x0b0f]
- [ 0.274017] pnp 00:09: [io 0x0b20-0x0b3f]
- [ 0.274018] pnp 00:09: [io 0x0900-0x090f]
- [ 0.274020] pnp 00:09: [io 0x0910-0x091f]
- [ 0.274021] pnp 00:09: [io 0xfe00-0xfefe]
- [ 0.274022] pnp 00:09: [io 0x0060]
- [ 0.274023] pnp 00:09: [io 0x0064]
- [ 0.274025] pnp 00:09: [mem 0xffb80000-0xffbfffff]
- [ 0.274026] pnp 00:09: [mem 0xfec10000-0xfec1001f]
- [ 0.274293] system 00:09: [io 0x04d0-0x04d1] has been reserved
- [ 0.274344] system 00:09: [io 0x040b] has been reserved
- [ 0.274388] system 00:09: [io 0x04d6] has been reserved
- [ 0.274464] system 00:09: [io 0x0c00-0x0c01] has been reserved
- [ 0.274511] system 00:09: [io 0x0c14] has been reserved
- [ 0.274555] system 00:09: [io 0x0c50-0x0c51] has been reserved
- [ 0.274599] system 00:09: [io 0x0c52] has been reserved
- [ 0.274643] system 00:09: [io 0x0c6c] has been reserved
- [ 0.274687] system 00:09: [io 0x0c6f] has been reserved
- [ 0.274731] system 00:09: [io 0x0cd0-0x0cd1] has been reserved
- [ 0.274775] system 00:09: [io 0x0cd2-0x0cd3] has been reserved
- [ 0.274820] system 00:09: [io 0x0cd4-0x0cd5] has been reserved
- [ 0.274864] system 00:09: [io 0x0cd6-0x0cd7] has been reserved
- [ 0.274908] system 00:09: [io 0x0cd8-0x0cdf] has been reserved
- [ 0.274952] system 00:09: [io 0x0800-0x089f] has been reserved
- [ 0.274996] system 00:09: [io 0x0b00-0x0b0f] has been reserved
- [ 0.275040] system 00:09: [io 0x0b20-0x0b3f] has been reserved
- [ 0.275084] system 00:09: [io 0x0900-0x090f] has been reserved
- [ 0.275128] system 00:09: [io 0x0910-0x091f] has been reserved
- [ 0.275173] system 00:09: [io 0xfe00-0xfefe] has been reserved
- [ 0.275219] system 00:09: [mem 0xffb80000-0xffbfffff] has been reserved
- [ 0.275263] system 00:09: [mem 0xfec10000-0xfec1001f] has been reserved
- [ 0.275310] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
- [ 0.275423] pnp 00:0a: [io 0x0000-0xffffffffffffffff disabled]
- [ 0.275425] pnp 00:0a: [io 0x0500-0x05df]
- [ 0.275439] pnp 00:0a: [io 0x0ae0-0x0aef]
- [ 0.275665] system 00:0a: [io 0x0500-0x05df] has been reserved
- [ 0.275717] system 00:0a: [io 0x0ae0-0x0aef] has been reserved
- [ 0.275765] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
- [ 0.275838] pnp 00:0b: [mem 0xe0000000-0xefffffff]
- [ 0.276061] system 00:0b: [mem 0xe0000000-0xefffffff] has been reserved
- [ 0.276116] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
- [ 0.276233] pnp 00:0c: [mem 0x00000000-0x0009ffff]
- [ 0.276234] pnp 00:0c: [mem 0x000c0000-0x000cffff]
- [ 0.276235] pnp 00:0c: [mem 0x000e0000-0x000fffff]
- [ 0.276237] pnp 00:0c: [mem 0x00100000-0xafefffff]
- [ 0.276238] pnp 00:0c: [mem 0xfec00000-0xffffffff]
- [ 0.276510] system 00:0c: [mem 0x00000000-0x0009ffff] could not be reserved
- [ 0.276562] system 00:0c: [mem 0x000c0000-0x000cffff] could not be reserved
- [ 0.276608] system 00:0c: [mem 0x000e0000-0x000fffff] could not be reserved
- [ 0.276652] system 00:0c: [mem 0x00100000-0xafefffff] could not be reserved
- [ 0.276697] system 00:0c: [mem 0xfec00000-0xffffffff] could not be reserved
- [ 0.276744] system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active)
- [ 0.276837] pnp: PnP ACPI: found 13 devices
- [ 0.276881] ACPI: ACPI bus type pnp unregistered
- [ 0.281992] pci 0000:00:01.0: PCI bridge to [bus 01-01]
- [ 0.282045] pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
- [ 0.282092] pci 0000:00:01.0: bridge window [mem 0xfe900000-0xfeafffff]
- [ 0.282140] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
- [ 0.282207] pci 0000:00:05.0: PCI bridge to [bus 02-02]
- [ 0.282253] pci 0000:00:05.0: bridge window [io 0xe000-0xefff]
- [ 0.282301] pci 0000:00:05.0: bridge window [mem 0xfeb00000-0xfebfffff]
- [ 0.282350] pci 0000:00:05.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
- [ 0.282414] pci 0000:00:14.4: PCI bridge to [bus 03-03]
- [ 0.282517] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
- [ 0.282518] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
- [ 0.282520] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
- [ 0.282521] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
- [ 0.282523] pci_bus 0000:00: resource 8 [mem 0xaff00000-0xdfffffff]
- [ 0.282524] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfebfffff]
- [ 0.282526] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff]
- [ 0.282527] pci_bus 0000:01: resource 1 [mem 0xfe900000-0xfeafffff]
- [ 0.282529] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
- [ 0.282531] pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
- [ 0.282532] pci_bus 0000:02: resource 1 [mem 0xfeb00000-0xfebfffff]
- [ 0.282534] pci_bus 0000:02: resource 2 [mem 0xfdf00000-0xfdffffff 64bit pref]
- [ 0.282536] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7]
- [ 0.282537] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff]
- [ 0.282539] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff]
- [ 0.282540] pci_bus 0000:03: resource 7 [mem 0x000d0000-0x000dffff]
- [ 0.282542] pci_bus 0000:03: resource 8 [mem 0xaff00000-0xdfffffff]
- [ 0.282543] pci_bus 0000:03: resource 9 [mem 0xf0000000-0xfebfffff]
- [ 0.282593] NET: Registered protocol family 2
- [ 0.282736] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
- [ 0.283990] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
- [ 0.288492] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
- [ 0.289052] TCP: Hash tables configured (established 524288 bind 65536)
- [ 0.289098] TCP: reno registered
- [ 0.289152] UDP hash table entries: 2048 (order: 4, 65536 bytes)
- [ 0.289236] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
- [ 0.289441] NET: Registered protocol family 1
- [ 0.289726] RPC: Registered named UNIX socket transport module.
- [ 0.289781] RPC: Registered udp transport module.
- [ 0.289825] RPC: Registered tcp transport module.
- [ 0.289868] RPC: Registered tcp NFSv4.1 backchannel transport module.
- [ 0.289924] pci 0000:00:01.0: MSI quirk detected; subordinate MSI disabled
- [ 0.650160] pci 0000:01:05.0: Boot video device
- [ 0.650167] PCI: CLS 64 bytes, default 64
- [ 0.652730] LVT offset 1 assigned for vector 0x400
- [ 0.652787] IBS: LVT offset 1 assigned
- [ 0.652863] perf: AMD IBS detected (0x0000001f)
- [ 0.655167] microcode: CPU0: patch_level=0x010000c8
- [ 0.655240] microcode: CPU1: patch_level=0x010000c8
- [ 0.655301] microcode: CPU2: patch_level=0x010000c8
- [ 0.655369] microcode: CPU3: patch_level=0x010000c8
- [ 0.655665] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
- [ 0.656950] audit: initializing netlink socket (disabled)
- [ 0.657026] type=2000 audit(1355326984.546:1): initialized
- [ 0.671696] HugeTLB registered 2 MB page size, pre-allocated 0 pages
- [ 0.684157] VFS: Disk quotas dquot_6.5.2
- [ 0.684480] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
- [ 0.687030] NFS: Registering the id_resolver key type
- [ 0.687861] NTFS driver 2.1.30 [Flags: R/W DEBUG].
- [ 0.688562] msgmni has been set to 5510
- [ 0.688857] SELinux: Registering netfilter hooks
- [ 0.689811] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
- [ 0.689879] io scheduler noop registered
- [ 0.689922] io scheduler deadline registered
- [ 0.690393] io scheduler cfq registered (default)
- [ 0.690919] pcieport 0000:00:05.0: irq 40 for MSI/MSI-X
- [ 0.691490] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
- [ 0.691765] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
- [ 0.955962] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
- [ 0.978036] 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
- [ 0.979351] Non-volatile memory driver v1.3
- [ 0.979408] Linux agpgart interface v0.103
- [ 0.980056] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
- [ 0.980130] ACPI: Power Button [PWRB]
- [ 0.980383] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
- [ 0.980455] ACPI: Power Button [PWRF]
- [ 0.984328] [drm] Initialized drm 1.1.0 20060810
- [ 0.984588] [drm] radeon defaulting to kernel modesetting.
- [ 0.984644] [drm] radeon kernel modesetting enabled.
- [ 0.985349] radeon 0000:01:05.0: setting latency timer to 64
- [ 0.985356] [drm] initializing kernel modesetting (RS880 0x1002:0x9710 0x1002:0x0000).
- [ 0.985453] [drm] register mmio base: 0xFEAF0000
- [ 0.985500] [drm] register mmio size: 65536
- [ 0.986256] ATOM BIOS: 113
- [ 0.986329] radeon 0000:01:05.0: VRAM: 256M 0x00000000C0000000 - 0x00000000CFFFFFFF (256M used)
- [ 0.986395] radeon 0000:01:05.0: GTT: 512M 0x00000000A0000000 - 0x00000000BFFFFFFF
- [ 0.986836] [drm] Detected VRAM RAM=256M, BAR=256M
- [ 0.986886] [drm] RAM width 32bits DDR
- [ 0.987053] [TTM] Zone kernel: Available graphics memory: 1410594 kiB
- [ 0.987104] [TTM] Initializing pool allocator
- [ 0.987149] [TTM] Initializing DMA pool allocator
- [ 0.987221] [drm] radeon: 256M of VRAM memory ready
- [ 0.987265] [drm] radeon: 512M of GTT memory ready.
- [ 0.987320] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
- [ 0.987364] [drm] Driver supports precise vblank timestamp query.
- [ 0.987433] [drm] radeon: irq initialized.
- [ 0.987479] [drm] GART: num cpu pages 131072, num gpu pages 131072
- [ 0.989023] [drm] radeon: ib pool ready.
- [ 0.989268] [drm] Loading RS780 Microcode
- [ 0.992741] [drm] PCIE GART of 512M enabled (table at 0x00000000C0040000).
- [ 0.992923] radeon 0000:01:05.0: WB enabled
- [ 0.992967] [drm] fence driver on ring 0 use gpu addr 0xa0000c00 and cpu addr 0xffff8800aade8c00
- [ 1.025120] [drm] ring test on 0 succeeded in 1 usecs
- [ 1.025241] [drm] ib test on ring 0 succeeded in 0 usecs
- [ 1.025791] [drm] Radeon Display Connectors
- [ 1.025835] [drm] Connector 0:
- [ 1.025881] [drm] VGA
- [ 1.025923] [drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
- [ 1.025982] [drm] Encoders:
- [ 1.026024] [drm] CRT1: INTERNAL_KLDSCP_DAC1
- [ 1.026067] [drm] Connector 1:
- [ 1.026110] [drm] DVI-D
- [ 1.026152] [drm] HPD3
- [ 1.026194] [drm] DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c
- [ 1.026253] [drm] Encoders:
- [ 1.026295] [drm] DFP3: INTERNAL_KLDSCP_LVTMA
- [ 1.026361] [drm] radeon: power management initialized
- [ 1.107868] [drm] fb mappable at 0xD0142000
- [ 1.107915] [drm] vram apper at 0xD0000000
- [ 1.107957] [drm] size 7299072
- [ 1.108000] [drm] fb depth is 24
- [ 1.108042] [drm] pitch is 6912
- [ 1.108201] fbcon: radeondrmfb (fb0) is primary device
- [ 1.142834] Console: switching to colour frame buffer device 180x56
- [ 1.154190] fb0: radeondrmfb frame buffer device
- [ 1.154255] drm: registered panic notifier
- [ 1.154320] [drm] Initialized radeon 2.16.0 20080528 for 0000:01:05.0 on minor 0
- [ 1.154443] work_for_cpu used greatest stack depth: 3592 bytes left
- [ 1.163444] brd: module loaded
- [ 1.168295] loop: module loaded
- [ 1.168948] ahci 0000:00:11.0: version 3.0
- [ 1.169126] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
- [ 1.169241] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc
- [ 1.174082] scsi0 : ahci
- [ 1.174685] scsi1 : ahci
- [ 1.175298] scsi2 : ahci
- [ 1.175869] scsi3 : ahci
- [ 1.176457] scsi4 : ahci
- [ 1.177082] scsi5 : ahci
- [ 1.177577] ata1: SATA max UDMA/133 abar m1024@0xfe8ffc00 port 0xfe8ffd00 irq 22
- [ 1.177711] ata2: SATA max UDMA/133 abar m1024@0xfe8ffc00 port 0xfe8ffd80 irq 22
- [ 1.177820] ata3: SATA max UDMA/133 abar m1024@0xfe8ffc00 port 0xfe8ffe00 irq 22
- [ 1.177929] ata4: SATA max UDMA/133 abar m1024@0xfe8ffc00 port 0xfe8ffe80 irq 22
- [ 1.178041] ata5: SATA max UDMA/133 abar m1024@0xfe8ffc00 port 0xfe8fff00 irq 22
- [ 1.178151] ata6: SATA max UDMA/133 abar m1024@0xfe8ffc00 port 0xfe8fff80 irq 22
- [ 1.179386] pata_atiixp 0000:00:14.1: setting latency timer to 64
- [ 1.180154] scsi6 : pata_atiixp
- [ 1.180564] scsi7 : pata_atiixp
- [ 1.181271] ata7: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14
- [ 1.181372] ata8: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15
- [ 1.182371] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
- [ 1.182472] e100: Copyright(c) 1999-2006 Intel Corporation
- [ 1.185216] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
- [ 1.187785] e1000: Copyright (c) 1999-2006 Intel Corporation.
- [ 1.190479] sky2: driver version 1.30
- [ 1.194463] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 1.197075] ehci_hcd: block sizes: qh 112 qtd 96 itd 192 sitd 96
- [ 1.197290] ehci_hcd 0000:00:12.2: EHCI Host Controller
- [ 1.199976] drivers/usb/core/inode.c: creating file 'devices'
- [ 1.199981] drivers/usb/core/inode.c: creating file '001'
- [ 1.200295] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
- [ 1.202969] ehci_hcd 0000:00:12.2: reset hcs_params 0x102306 dbg=1 cc=2 pcc=3 ordered !ppc ports=6
- [ 1.202973] ehci_hcd 0000:00:12.2: reset hcc_params a072 thresh 7 uframes 256/512/1024
- [ 1.202977] ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
- [ 1.205721] ehci_hcd 0000:00:12.2: debug port 1
- [ 1.208388] ehci_hcd 0000:00:12.2: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT
- [ 1.208397] ehci_hcd 0000:00:12.2: MWI active
- [ 1.208399] ehci_hcd 0000:00:12.2: supports USB remote wakeup
- [ 1.208416] ehci_hcd 0000:00:12.2: irq 17, io mem 0xfe8ff800
- [ 1.211046] ehci_hcd 0000:00:12.2: init command 0010005 (park)=0 ithresh=1 period=512 RUN
- [ 1.216602] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
- [ 1.219267] usb usb1: default language 0x0409
- [ 1.219272] usb usb1: udev 1, busnum 1, minor = 0
- [ 1.219274] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
- [ 1.221966] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 1.224661] usb usb1: Product: EHCI Host Controller
- [ 1.227359] usb usb1: Manufacturer: Linux 3.4.9-gentoo ehci_hcd
- [ 1.230060] usb usb1: SerialNumber: 0000:00:12.2
- [ 1.233094] usb usb1: usb_probe_device
- [ 1.233100] usb usb1: configuration #1 chosen from 1 choice
- [ 1.233117] usb usb1: adding 1-0:1.0 (config #1, interface 0)
- [ 1.233322] hub 1-0:1.0: usb_probe_interface
- [ 1.233326] hub 1-0:1.0: usb_probe_interface - got id
- [ 1.233328] hub 1-0:1.0: USB hub found
- [ 1.236075] hub 1-0:1.0: 6 ports detected
- [ 1.238789] hub 1-0:1.0: standalone hub
- [ 1.238790] hub 1-0:1.0: no power switching (usb 1.0)
- [ 1.238792] hub 1-0:1.0: individual port over-current protection
- [ 1.238793] hub 1-0:1.0: power on to power good time: 20ms
- [ 1.238796] hub 1-0:1.0: local power source is good
- [ 1.238797] hub 1-0:1.0: trying to enable port power on non-switchable hub
- [ 1.238836] drivers/usb/core/inode.c: creating file '001'
- [ 1.239116] ehci_hcd 0000:00:13.2: EHCI Host Controller
- [ 1.241936] drivers/usb/core/inode.c: creating file '002'
- [ 1.242205] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2
- [ 1.245074] ehci_hcd 0000:00:13.2: reset hcs_params 0x102306 dbg=1 cc=2 pcc=3 ordered !ppc ports=6
- [ 1.245077] ehci_hcd 0000:00:13.2: reset hcc_params a072 thresh 7 uframes 256/512/1024
- [ 1.245081] ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
- [ 1.247979] ehci_hcd 0000:00:13.2: debug port 1
- [ 1.250816] ehci_hcd 0000:00:13.2: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT
- [ 1.250824] ehci_hcd 0000:00:13.2: MWI active
- [ 1.250825] ehci_hcd 0000:00:13.2: supports USB remote wakeup
- [ 1.250847] ehci_hcd 0000:00:13.2: irq 19, io mem 0xfe8ff400
- [ 1.253691] ehci_hcd 0000:00:13.2: init command 0010005 (park)=0 ithresh=1 period=512 RUN
- [ 1.259562] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
- [ 1.262532] usb usb2: default language 0x0409
- [ 1.262537] usb usb2: udev 1, busnum 2, minor = 128
- [ 1.262539] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
- [ 1.265429] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 1.268338] usb usb2: Product: EHCI Host Controller
- [ 1.271217] usb usb2: Manufacturer: Linux 3.4.9-gentoo ehci_hcd
- [ 1.274100] usb usb2: SerialNumber: 0000:00:13.2
- [ 1.277267] usb usb2: usb_probe_device
- [ 1.277272] usb usb2: configuration #1 chosen from 1 choice
- [ 1.277290] usb usb2: adding 2-0:1.0 (config #1, interface 0)
- [ 1.277492] hub 2-0:1.0: usb_probe_interface
- [ 1.277526] hub 2-0:1.0: usb_probe_interface - got id
- [ 1.277528] hub 2-0:1.0: USB hub found
- [ 1.280356] hub 2-0:1.0: 6 ports detected
- [ 1.283183] hub 2-0:1.0: standalone hub
- [ 1.283184] hub 2-0:1.0: no power switching (usb 1.0)
- [ 1.283186] hub 2-0:1.0: individual port over-current protection
- [ 1.283187] hub 2-0:1.0: power on to power good time: 20ms
- [ 1.283190] hub 2-0:1.0: local power source is good
- [ 1.283192] hub 2-0:1.0: trying to enable port power on non-switchable hub
- [ 1.283228] drivers/usb/core/inode.c: creating file '001'
- [ 1.283542] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
- [ 1.286366] ohci_hcd: block sizes: ed 80 td 96
- [ 1.286606] ohci_hcd 0000:00:12.0: OHCI Host Controller
- [ 1.289428] drivers/usb/core/inode.c: creating file '003'
- [ 1.289743] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 3
- [ 1.292587] ohci_hcd 0000:00:12.0: created debug files
- [ 1.292589] ohci_hcd 0000:00:12.0: supports USB remote wakeup
- [ 1.292609] ohci_hcd 0000:00:12.0: irq 16, io mem 0xfe8fe000
- [ 1.338510] ehci_hcd 0000:00:12.2: GetStatus port:3 status 001403 0 ACK POWER sig=k CSC CONNECT
- [ 1.338514] hub 1-0:1.0: port 3: status 0501 change 0001
- [ 1.338523] ehci_hcd 0000:00:12.2: GetStatus port:4 status 001403 0 ACK POWER sig=k CSC CONNECT
- [ 1.338525] hub 1-0:1.0: port 4: status 0501 change 0001
- [ 1.339304] ata7.00: ATA-6: Maxtor 2B020H1, WAH21PB0, max UDMA/100
- [ 1.342215] ata7.00: 40020624 sectors, multi 16: LBA
- [ 1.345488] ata7.01: ATA-6: Maxtor 2B020H1, WAH21PB0, max UDMA/100
- [ 1.348492] ata7.01: 40020624 sectors, multi 16: LBA
- [ 1.349492] ohci_hcd 0000:00:12.0: OHCI controller state
- [ 1.349498] ohci_hcd 0000:00:12.0: OHCI 1.0, NO legacy support registers, rh state running
- [ 1.349502] ohci_hcd 0000:00:12.0: control 0x283 RWC HCFS=operational CBSR=3
- [ 1.349506] ohci_hcd 0000:00:12.0: cmdstatus 0x00000 SOC=0
- [ 1.349509] ohci_hcd 0000:00:12.0: intrstatus 0x00000004 SF
- [ 1.349512] ohci_hcd 0000:00:12.0: intrenable 0x8000005a MIE RHSC UE RD WDH
- [ 1.349524] ohci_hcd 0000:00:12.0: hcca frame #0005
- [ 1.349528] ohci_hcd 0000:00:12.0: roothub.a 02001203 POTPGT=2 NOCP NPS NDP=3(3)
- [ 1.349531] ohci_hcd 0000:00:12.0: roothub.b 00000000 PPCM=0000 DR=0000
- [ 1.349534] ohci_hcd 0000:00:12.0: roothub.status 00008000 DRWE
- [ 1.349538] ohci_hcd 0000:00:12.0: roothub.portstatus [0] 0x00000100 PPS
- [ 1.349541] ohci_hcd 0000:00:12.0: roothub.portstatus [1] 0x00000100 PPS
- [ 1.349545] ohci_hcd 0000:00:12.0: roothub.portstatus [2] 0x00000100 PPS
- [ 1.349566] usb usb3: default language 0x0409
- [ 1.349570] usb usb3: udev 1, busnum 3, minor = 256
- [ 1.349571] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
- [ 1.349573] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 1.349574] usb usb3: Product: OHCI Host Controller
- [ 1.349575] usb usb3: Manufacturer: Linux 3.4.9-gentoo ohci_hcd
- [ 1.349576] usb usb3: SerialNumber: 0000:00:12.0
- [ 1.349922] usb usb3: usb_probe_device
- [ 1.349925] usb usb3: configuration #1 chosen from 1 choice
- [ 1.349937] usb usb3: adding 3-0:1.0 (config #1, interface 0)
- [ 1.350039] hub 3-0:1.0: usb_probe_interface
- [ 1.350040] hub 3-0:1.0: usb_probe_interface - got id
- [ 1.350041] hub 3-0:1.0: USB hub found
- [ 1.350049] hub 3-0:1.0: 3 ports detected
- [ 1.350050] hub 3-0:1.0: standalone hub
- [ 1.350052] hub 3-0:1.0: no power switching (usb 1.0)
- [ 1.350053] hub 3-0:1.0: no over-current protection
- [ 1.350054] hub 3-0:1.0: power on to power good time: 4ms
- [ 1.350058] hub 3-0:1.0: local power source is good
- [ 1.350060] hub 3-0:1.0: trying to enable port power on non-switchable hub
- [ 1.350071] drivers/usb/core/inode.c: creating file '001'
- [ 1.350102] ehci_hcd 0000:00:12.2: HS companion for 0000:00:12.0
- [ 1.350370] ohci_hcd 0000:00:12.1: OHCI Host Controller
- [ 1.350387] drivers/usb/core/inode.c: creating file '004'
- [ 1.350695] ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus number 4
- [ 1.350751] ohci_hcd 0000:00:12.1: created debug files
- [ 1.350752] ohci_hcd 0000:00:12.1: supports USB remote wakeup
- [ 1.350762] ohci_hcd 0000:00:12.1: irq 16, io mem 0xfe8fd000
- [ 1.382489] hub 2-0:1.0: state 7 ports 6 chg 0000 evt 0000
- [ 1.390182] ata7.00: configured for UDMA/100
- [ 1.400164] ata7.01: configured for UDMA/100
- [ 1.405447] ohci_hcd 0000:00:12.1: OHCI controller state
- [ 1.405454] ohci_hcd 0000:00:12.1: OHCI 1.0, NO legacy support registers, rh state running
- [ 1.405458] ohci_hcd 0000:00:12.1: control 0x283 RWC HCFS=operational CBSR=3
- [ 1.405461] ohci_hcd 0000:00:12.1: cmdstatus 0x00000 SOC=0
- [ 1.405464] ohci_hcd 0000:00:12.1: intrstatus 0x00000004 SF
- [ 1.405467] ohci_hcd 0000:00:12.1: intrenable 0x8000005a MIE RHSC UE RD WDH
- [ 1.405477] ohci_hcd 0000:00:12.1: hcca frame #0005
- [ 1.405482] ohci_hcd 0000:00:12.1: roothub.a 02001203 POTPGT=2 NOCP NPS NDP=3(3)
- [ 1.405485] ohci_hcd 0000:00:12.1: roothub.b 00000000 PPCM=0000 DR=0000
- [ 1.405487] ohci_hcd 0000:00:12.1: roothub.status 00008000 DRWE
- [ 1.405491] ohci_hcd 0000:00:12.1: roothub.portstatus [0] 0x00000100 PPS
- [ 1.405494] ohci_hcd 0000:00:12.1: roothub.portstatus [1] 0x00000100 PPS
- [ 1.405497] ohci_hcd 0000:00:12.1: roothub.portstatus [2] 0x00000100 PPS
- [ 1.405515] usb usb4: default language 0x0409
- [ 1.405519] usb usb4: udev 1, busnum 4, minor = 384
- [ 1.405520] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
- [ 1.408730] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 1.411929] usb usb4: Product: OHCI Host Controller
- [ 1.415087] usb usb4: Manufacturer: Linux 3.4.9-gentoo ohci_hcd
- [ 1.418248] usb usb4: SerialNumber: 0000:00:12.1
- [ 1.421701] usb usb4: usb_probe_device
- [ 1.421707] usb usb4: configuration #1 chosen from 1 choice
- [ 1.421718] usb usb4: adding 4-0:1.0 (config #1, interface 0)
- [ 1.421921] hub 4-0:1.0: usb_probe_interface
- [ 1.421925] hub 4-0:1.0: usb_probe_interface - got id
- [ 1.421926] hub 4-0:1.0: USB hub found
- [ 1.425120] hub 4-0:1.0: 3 ports detected
- [ 1.428205] hub 4-0:1.0: standalone hub
- [ 1.428206] hub 4-0:1.0: no power switching (usb 1.0)
- [ 1.428207] hub 4-0:1.0: no over-current protection
- [ 1.428209] hub 4-0:1.0: power on to power good time: 4ms
- [ 1.428213] hub 4-0:1.0: local power source is good
- [ 1.428215] hub 4-0:1.0: trying to enable port power on non-switchable hub
- [ 1.428241] drivers/usb/core/inode.c: creating file '001'
- [ 1.428268] ehci_hcd 0000:00:12.2: HS companion for 0000:00:12.1
- [ 1.428544] ohci_hcd 0000:00:13.0: OHCI Host Controller
- [ 1.431665] drivers/usb/core/inode.c: creating file '005'
- [ 1.431946] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5
- [ 1.435116] ohci_hcd 0000:00:13.0: created debug files
- [ 1.435118] ohci_hcd 0000:00:13.0: supports USB remote wakeup
- [ 1.435126] ohci_hcd 0000:00:13.0: irq 18, io mem 0xfe8fc000
- [ 1.438422] hub 1-0:1.0: state 7 ports 6 chg 0018 evt 0000
- [ 1.438438] hub 1-0:1.0: port 3, status 0501, change 0000, 480 Mb/s
- [ 1.438448] ehci_hcd 0000:00:12.2: port 3 low speed --> companion
- [ 1.449401] ohci_hcd 0000:00:12.0: GetStatus roothub.portstatus [2] = 0x00010301 CSC LSDA PPS CCS
- [ 1.449404] hub 3-0:1.0: port 3: status 0301 change 0001
- [ 1.484402] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
- [ 1.487561] ata6: SATA link down (SStatus 0 SControl 300)
- [ 1.490730] ata3: SATA link down (SStatus 0 SControl 300)
- [ 1.493814] ata1.00: ATAPI: HL-DT-ST DVDRAM GH22NS50, TN02, max UDMA/100
- [ 1.493826] ehci_hcd 0000:00:12.2: GetStatus port:3 status 003002 0 ACK POWER OWNER sig=se0 CSC
- [ 1.493856] hub 1-0:1.0: port 4, status 0501, change 0000, 480 Mb/s
- [ 1.493864] ehci_hcd 0000:00:12.2: port 4 low speed --> companion
- [ 1.496998] ata2: SATA link down (SStatus 0 SControl 300)
- [ 1.497816] ohci_hcd 0000:00:13.0: OHCI controller state
- [ 1.497820] ohci_hcd 0000:00:13.0: OHCI 1.0, NO legacy support registers, rh state running
- [ 1.497824] ohci_hcd 0000:00:13.0: control 0x283 RWC HCFS=operational CBSR=3
- [ 1.497828] ohci_hcd 0000:00:13.0: cmdstatus 0x00000 SOC=0
- [ 1.497831] ohci_hcd 0000:00:13.0: intrstatus 0x00000004 SF
- [ 1.497834] ohci_hcd 0000:00:13.0: intrenable 0x8000005a MIE RHSC UE RD WDH
- [ 1.497845] ohci_hcd 0000:00:13.0: hcca frame #0005
- [ 1.497848] ohci_hcd 0000:00:13.0: roothub.a 02001203 POTPGT=2 NOCP NPS NDP=3(3)
- [ 1.497851] ohci_hcd 0000:00:13.0: roothub.b 00000000 PPCM=0000 DR=0000
- [ 1.497854] ohci_hcd 0000:00:13.0: roothub.status 00008000 DRWE
- [ 1.497857] ohci_hcd 0000:00:13.0: roothub.portstatus [0] 0x00000100 PPS
- [ 1.497861] ohci_hcd 0000:00:13.0: roothub.portstatus [1] 0x00000100 PPS
- [ 1.497864] ohci_hcd 0000:00:13.0: roothub.portstatus [2] 0x00000100 PPS
- [ 1.497882] usb usb5: default language 0x0409
- [ 1.497886] usb usb5: udev 1, busnum 5, minor = 512
- [ 1.497888] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
- [ 1.497889] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 1.497891] usb usb5: Product: OHCI Host Controller
- [ 1.497892] usb usb5: Manufacturer: Linux 3.4.9-gentoo ohci_hcd
- [ 1.497893] usb usb5: SerialNumber: 0000:00:13.0
- [ 1.498215] usb usb5: usb_probe_device
- [ 1.498218] usb usb5: configuration #1 chosen from 1 choice
- [ 1.498227] usb usb5: adding 5-0:1.0 (config #1, interface 0)
- [ 1.498324] hub 5-0:1.0: usb_probe_interface
- [ 1.498326] hub 5-0:1.0: usb_probe_interface - got id
- [ 1.498328] hub 5-0:1.0: USB hub found
- [ 1.498334] hub 5-0:1.0: 3 ports detected
- [ 1.498335] hub 5-0:1.0: standalone hub
- [ 1.498336] hub 5-0:1.0: no power switching (usb 1.0)
- [ 1.498337] hub 5-0:1.0: no over-current protection
- [ 1.498339] hub 5-0:1.0: power on to power good time: 4ms
- [ 1.498343] hub 5-0:1.0: local power source is good
- [ 1.498345] hub 5-0:1.0: trying to enable port power on non-switchable hub
- [ 1.498359] drivers/usb/core/inode.c: creating file '001'
- [ 1.498398] ehci_hcd 0000:00:13.2: HS companion for 0000:00:13.0
- [ 1.498529] ohci_hcd 0000:00:13.1: OHCI Host Controller
- [ 1.498537] drivers/usb/core/inode.c: creating file '006'
- [ 1.498720] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 6
- [ 1.498748] ohci_hcd 0000:00:13.1: created debug files
- [ 1.498749] ohci_hcd 0000:00:13.1: supports USB remote wakeup
- [ 1.498758] ohci_hcd 0000:00:13.1: irq 18, io mem 0xfe8f7000
- [ 1.527448] ohci_hcd 0000:00:12.1: GetStatus roothub.portstatus [0] = 0x00010301 CSC LSDA PPS CCS
- [ 1.527455] hub 4-0:1.0: port 1: status 0301 change 0001
- [ 1.531244] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
- [ 1.534448] ata4: SATA link down (SStatus 0 SControl 300)
- [ 1.537837] ata5.00: ATA-8: Hitachi HDS5C3015ALA632, ML5OA580, max UDMA/133
- [ 1.540990] ata5.00: 2930277168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
- [ 1.544168] ata1.00: configured for UDMA/100
- [ 1.544318] ehci_hcd 0000:00:12.2: GetStatus port:4 status 003002 0 ACK POWER OWNER sig=se0 CSC
- [ 1.544347] hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0010
- [ 1.548657] ata5.00: configured for UDMA/133
- [ 1.549327] hub 3-0:1.0: state 7 ports 3 chg 0008 evt 0000
- [ 1.549341] hub 3-0:1.0: port 3, status 0301, change 0000, 1.5 Mb/s
- [ 1.553321] ohci_hcd 0000:00:13.1: OHCI controller state
- [ 1.553328] ohci_hcd 0000:00:13.1: OHCI 1.0, NO legacy support registers, rh state running
- [ 1.553331] ohci_hcd 0000:00:13.1: control 0x283 RWC HCFS=operational CBSR=3
- [ 1.553334] ohci_hcd 0000:00:13.1: cmdstatus 0x00000 SOC=0
- [ 1.553337] ohci_hcd 0000:00:13.1: intrstatus 0x00000004 SF
- [ 1.553340] ohci_hcd 0000:00:13.1: intrenable 0x8000005a MIE RHSC UE RD WDH
- [ 1.553350] ohci_hcd 0000:00:13.1: hcca frame #0005
- [ 1.553354] ohci_hcd 0000:00:13.1: roothub.a 02001203 POTPGT=2 NOCP NPS NDP=3(3)
- [ 1.553356] ohci_hcd 0000:00:13.1: roothub.b 00000000 PPCM=0000 DR=0000
- [ 1.553359] ohci_hcd 0000:00:13.1: roothub.status 00008000 DRWE
- [ 1.553363] ohci_hcd 0000:00:13.1: roothub.portstatus [0] 0x00000100 PPS
- [ 1.553366] ohci_hcd 0000:00:13.1: roothub.portstatus [1] 0x00000100 PPS
- [ 1.553369] ohci_hcd 0000:00:13.1: roothub.portstatus [2] 0x00000100 PPS
- [ 1.553384] usb usb6: default language 0x0409
- [ 1.553389] usb usb6: udev 1, busnum 6, minor = 640
- [ 1.553390] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
- [ 1.556529] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 1.559671] usb usb6: Product: OHCI Host Controller
- [ 1.561152] scsi 0:0:0:0: CD-ROM HL-DT-ST DVDRAM GH22NS50 TN02 PQ: 0 ANSI: 5
- [ 1.566028] usb usb6: Manufacturer: Linux 3.4.9-gentoo ohci_hcd
- [ 1.566086] sr0: scsi3-mmc drive: 125x/125x writer dvd-ram cd/rw xa/form2 cdda tray
- [ 1.566091] cdrom: Uniform CD-ROM driver Revision: 3.20
- [ 1.566736] sr 0:0:0:0: Attached scsi CD-ROM sr0
- [ 1.567315] sr 0:0:0:0: Attached scsi generic sg0 type 5
- [ 1.567964] scsi 4:0:0:0: Direct-Access ATA Hitachi HDS5C301 ML5O PQ: 0 ANSI: 5
- [ 1.568965] sd 4:0:0:0: [sda] 2930277168 512-byte logical blocks: (1.50 TB/1.36 TiB)
- [ 1.569104] sd 4:0:0:0: [sda] Write Protect is off
- [ 1.569107] sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00
- [ 1.569126] sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 1.569131] sd 4:0:0:0: Attached scsi generic sg1 type 0
- [ 1.569445] scsi 6:0:0:0: Direct-Access ATA Maxtor 2B020H1 WAH2 PQ: 0 ANSI: 5
- [ 1.570361] sd 6:0:0:0: [sdb] 40020624 512-byte logical blocks: (20.4 GB/19.0 GiB)
- [ 1.570462] sd 6:0:0:0: [sdb] Write Protect is off
- [ 1.570464] sd 6:0:0:0: [sdb] Mode Sense: 00 3a 00 00
- [ 1.570498] sd 6:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 1.570557] sd 6:0:0:0: Attached scsi generic sg2 type 0
- [ 1.570803] scsi 6:0:1:0: Direct-Access ATA Maxtor 2B020H1 WAH2 PQ: 0 ANSI: 5
- [ 1.571533] sd 6:0:1:0: Attached scsi generic sg3 type 0
- [ 1.581053] sd 6:0:1:0: [sdc] 40020624 512-byte logical blocks: (20.4 GB/19.0 GiB)
- [ 1.591038] sdb: sdb1 sdb2 sdb3
- [ 1.591172] sd 6:0:1:0: [sdc] Write Protect is off
- [ 1.591175] sd 6:0:1:0: [sdc] Mode Sense: 00 3a 00 00
- [ 1.591264] sd 6:0:1:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 1.598580] sdc: unknown partition table
- [ 1.598781] sd 6:0:0:0: [sdb] Attached SCSI disk
- [ 1.598922] sd 6:0:1:0: [sdc] Attached SCSI disk
- [ 1.619291] sda: sda1 sda2 sda3 < >
- [ 1.620972] sd 4:0:0:0: [sda] Attached SCSI disk
- [ 1.654930] usb usb6: SerialNumber: 0000:00:13.1
- [ 1.655215] ohci_hcd 0000:00:12.0: GetStatus roothub.portstatus [2] = 0x00100303 PRSC LSDA PPS PES CCS
- [ 1.655221] Refined TSC clocksource calibration: 3000.123 MHz.
- [ 1.655228] Switching to clocksource tsc
- [ 1.666181] usb usb6: usb_probe_device
- [ 1.666186] usb usb6: configuration #1 chosen from 1 choice
- [ 1.666197] usb usb6: adding 6-0:1.0 (config #1, interface 0)
- [ 1.666314] hub 6-0:1.0: usb_probe_interface
- [ 1.666315] hub 6-0:1.0: usb_probe_interface - got id
- [ 1.666317] hub 6-0:1.0: USB hub found
- [ 1.669950] hub 6-0:1.0: 3 ports detected
- [ 1.673534] hub 6-0:1.0: standalone hub
- [ 1.673535] hub 6-0:1.0: no power switching (usb 1.0)
- [ 1.673536] hub 6-0:1.0: no over-current protection
- [ 1.673538] hub 6-0:1.0: power on to power good time: 4ms
- [ 1.673546] hub 6-0:1.0: local power source is good
- [ 1.673547] hub 6-0:1.0: trying to enable port power on non-switchable hub
- [ 1.673560] drivers/usb/core/inode.c: creating file '001'
- [ 1.673582] ehci_hcd 0000:00:13.2: HS companion for 0000:00:13.1
- [ 1.673837] ohci_hcd 0000:00:14.5: OHCI Host Controller
- [ 1.677477] drivers/usb/core/inode.c: creating file '007'
- [ 1.677714] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 7
- [ 1.681414] ohci_hcd 0000:00:14.5: created debug files
- [ 1.681415] ohci_hcd 0000:00:14.5: supports USB remote wakeup
- [ 1.681424] ohci_hcd 0000:00:14.5: irq 18, io mem 0xfe8f6000
- [ 1.705139] usb 3-3: new low-speed USB device number 2 using ohci_hcd
- [ 1.739121] ohci_hcd 0000:00:14.5: OHCI controller state
- [ 1.739128] ohci_hcd 0000:00:14.5: OHCI 1.0, NO legacy support registers, rh state running
- [ 1.739132] ohci_hcd 0000:00:14.5: control 0x283 RWC HCFS=operational CBSR=3
- [ 1.739135] ohci_hcd 0000:00:14.5: cmdstatus 0x00000 SOC=0
- [ 1.739138] ohci_hcd 0000:00:14.5: intrstatus 0x00000004 SF
- [ 1.739141] ohci_hcd 0000:00:14.5: intrenable 0x8000005a MIE RHSC UE RD WDH
- [ 1.739150] ohci_hcd 0000:00:14.5: hcca frame #0005
- [ 1.739154] ohci_hcd 0000:00:14.5: roothub.a 02001202 POTPGT=2 NOCP NPS NDP=2(2)
- [ 1.739156] ohci_hcd 0000:00:14.5: roothub.b 00000000 PPCM=0000 DR=0000
- [ 1.739159] ohci_hcd 0000:00:14.5: roothub.status 00008000 DRWE
- [ 1.739163] ohci_hcd 0000:00:14.5: roothub.portstatus [0] 0x00000100 PPS
- [ 1.739166] ohci_hcd 0000:00:14.5: roothub.portstatus [1] 0x00000100 PPS
- [ 1.739181] usb usb7: default language 0x0409
- [ 1.739187] usb usb7: udev 1, busnum 7, minor = 768
- [ 1.739189] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
- [ 1.742831] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 1.746466] usb usb7: Product: OHCI Host Controller
- [ 1.750103] usb usb7: Manufacturer: Linux 3.4.9-gentoo ohci_hcd
- [ 1.753751] usb usb7: SerialNumber: 0000:00:14.5
- [ 1.757644] usb usb7: usb_probe_device
- [ 1.757647] usb usb7: configuration #1 chosen from 1 choice
- [ 1.757656] usb usb7: adding 7-0:1.0 (config #1, interface 0)
- [ 1.757728] hub 7-0:1.0: usb_probe_interface
- [ 1.757729] hub 7-0:1.0: usb_probe_interface - got id
- [ 1.757731] hub 7-0:1.0: USB hub found
- [ 1.761384] hub 7-0:1.0: 2 ports detected
- [ 1.764948] hub 7-0:1.0: standalone hub
- [ 1.764949] hub 7-0:1.0: no power switching (usb 1.0)
- [ 1.764950] hub 7-0:1.0: no over-current protection
- [ 1.764951] hub 7-0:1.0: power on to power good time: 4ms
- [ 1.764959] hub 7-0:1.0: local power source is good
- [ 1.764961] hub 7-0:1.0: trying to enable port power on non-switchable hub
- [ 1.764976] drivers/usb/core/inode.c: creating file '001'
- [ 1.765280] uhci_hcd: USB Universal Host Controller Interface driver
- [ 1.769577] usbcore: registered new interface driver usblp
- [ 1.772092] ohci_hcd 0000:00:12.0: GetStatus roothub.portstatus [2] = 0x00100303 PRSC LSDA PPS PES CCS
- [ 1.773249] Initializing USB Mass Storage driver...
- [ 1.777140] usbcore: registered new interface driver usb-storage
- [ 1.780785] USB Mass Storage support registered.
- [ 1.784664] usbcore: registered new interface driver libusual
- [ 1.788768] i8042: PNP: No PS/2 controller found. Probing ports directly.
- [ 1.793074] serio: i8042 KBD port at 0x60,0x64 irq 1
- [ 1.796494] serio: i8042 AUX port at 0x60,0x64 irq 12
- [ 1.800513] mousedev: PS/2 mouse device common for all mice
- [ 1.805274] rtc_cmos 00:03: RTC can wake from S4
- [ 1.809224] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
- [ 1.812810] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
- [ 1.817229] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
- [ 1.821104] cpuidle: using governor ladder
- [ 1.824664] cpuidle: using governor menu
- [ 1.828103] EFI Variables Facility v0.08 2004-May-17
- [ 1.835845] usbcore: registered new interface driver usbhid
- [ 1.839361] usbhid: USB HID core driver
- [ 1.843054] usb 3-3: skipped 1 descriptor after interface
- [ 1.845027] usb 3-3: default language 0x0409
- [ 1.850040] usb 3-3: udev 2, busnum 3, minor = 257
- [ 1.850045] usb 3-3: New USB device found, idVendor=046d, idProduct=c315
- [ 1.854470] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
- [ 1.857876] usb 3-3: Product: Logitech USB Keyboard
- [ 1.861248] usb 3-3: Manufacturer: Logitech
- [ 1.864795] usb 3-3: usb_probe_device
- [ 1.864797] usb 3-3: configuration #1 chosen from 1 choice
- [ 1.866044] usb 3-3: adding 3-3:1.0 (config #1, interface 0)
- [ 1.866239] usbhid 3-3:1.0: usb_probe_interface
- [ 1.866244] usbhid 3-3:1.0: usb_probe_interface - got id
- [ 1.872410] input: Logitech Logitech USB Keyboard as /devices/pci0000:00/0000:00:12.0/usb3/3-3/3-3:1.0/input/input2
- [ 1.876219] generic-usb 0003:046D:C315.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech Logitech USB Keyboard] on usb-0000:00:12.0-3/input0
- [ 1.879791] drivers/usb/core/inode.c: creating file '002'
- [ 1.879810] hub 3-0:1.0: state 7 ports 3 chg 0000 evt 0008
- [ 1.879815] hub 5-0:1.0: state 7 ports 3 chg 0000 evt 0000
- [ 1.879818] hub 4-0:1.0: state 7 ports 3 chg 0002 evt 0000
- [ 1.879822] hub 4-0:1.0: port 1, status 0301, change 0000, 1.5 Mb/s
- [ 1.889903] Netfilter messages via NETLINK v0.30.
- [ 1.893500] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
- [ 1.897627] ctnetlink v0.93: registering with nfnetlink.
- [ 1.901344] ip_tables: (C) 2000-2006 Netfilter Core Team
- [ 1.905019] TCP: cubic registered
- [ 1.908471] Initializing XFRM netlink socket
- [ 1.909543] NET: Registered protocol family 10
- [ 1.910073] ip6_tables: (C) 2000-2006 Netfilter Core Team
- [ 1.910113] IPv6 over IPv4 tunneling driver
- [ 1.910884] NET: Registered protocol family 17
- [ 1.910933] Registering the dns_resolver key type
- [ 1.911861] PM: Hibernation image not present or could not be loaded.
- [ 1.911880] registered taskstats version 1
- [ 1.912329] Magic number: 8:214:740
- [ 1.936693] console [netcon0] enabled
- [ 1.940215] netconsole: network logging started
- [ 1.943832] ALSA device list:
- [ 1.943921] ohci_hcd 0000:00:12.1: GetStatus roothub.portstatus [0] = 0x00100303 PRSC LSDA PPS PES CCS
- [ 1.947262] #0: HDA ATI SB at 0xfe8f0000 irq 16
- [ 1.950770] md: Waiting for all devices to be available before autodetect
- [ 1.954256] md: If you don't use raid, use raid=noautodetect
- [ 1.958262] md: Autodetecting RAID arrays.
- [ 1.961750] md: Scanned 0 and added 0 devices.
- [ 1.965175] md: autorun ...
- [ 1.968568] md: ... autorun DONE.
- [ 1.994875] usb 4-1: new low-speed USB device number 2 using ohci_hcd
- [ 1.995814] EXT3-fs (sdb3): recovery required on readonly filesystem
- [ 1.995827] EXT3-fs (sdb3): write access will be enabled during recovery
- [ 2.067797] ohci_hcd 0000:00:12.1: GetStatus roothub.portstatus [0] = 0x00100303 PRSC LSDA PPS PES CCS
- [ 2.136769] usb 4-1: skipped 1 descriptor after interface
- [ 2.138765] usb 4-1: default language 0x0409
- [ 2.140765] usb 4-1: udev 2, busnum 4, minor = 385
- [ 2.140769] usb 4-1: New USB device found, idVendor=0461, idProduct=4d0f
- [ 2.144307] usb 4-1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
- [ 2.147790] usb 4-1: Product: USB Optical Mouse
- [ 2.151495] usb 4-1: usb_probe_device
- [ 2.151499] usb 4-1: configuration #1 chosen from 1 choice
- [ 2.152761] usb 4-1: adding 4-1:1.0 (config #1, interface 0)
- [ 2.152968] usbhid 4-1:1.0: usb_probe_interface
- [ 2.152980] usbhid 4-1:1.0: usb_probe_interface - got id
- [ 2.158132] input: USB Optical Mouse as /devices/pci0000:00/0000:00:12.1/usb4/4-1/4-1:1.0/input/input3
- [ 2.162449] generic-usb 0003:0461:4D0F.0002: input,hidraw1: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:12.1-1/input0
- [ 2.166228] drivers/usb/core/inode.c: creating file '002'
- [ 2.166250] hub 6-0:1.0: state 7 ports 3 chg 0000 evt 0000
- [ 2.166253] hub 7-0:1.0: state 7 ports 2 chg 0000 evt 0000
- [ 2.166255] hub 4-0:1.0: state 7 ports 3 chg 0000 evt 0002
- [ 2.690697] kjournald starting. Commit interval 5 seconds
- [ 2.692267] EXT3-fs (sdb3): recovery complete
- [ 2.692271] EXT3-fs (sdb3): mounted filesystem with ordered data mode
- [ 2.692292] VFS: Mounted root (ext3 filesystem) readonly on device 8:19.
- [ 2.742177] devtmpfs: mounted
- [ 2.746320] Freeing unused kernel memory: 576k freed
- [ 2.750184] Write protecting the kernel read-only data: 12288k
- [ 2.755493] Freeing unused kernel memory: 568k freed
- [ 2.763502] Freeing unused kernel memory: 1556k freed
- [ 3.925343] init-early.sh used greatest stack depth: 3472 bytes left
- [ 7.325580] udevd[1327]: starting version 171
- [ 10.191696] EXT3-fs (sdb3): using internal journal
- [ 10.375809] kjournald starting. Commit interval 5 seconds
- [ 10.376198] EXT3-fs (sdc): using internal journal
- [ 10.376204] EXT3-fs (sdc): mounted filesystem with ordered data mode
- [ 11.851255] Adding 6291452k swap on /dev/sdb2. Priority:-1 extents:1 across:6291452k
- [ 665.272237] hub 2-0:1.0: state 7 ports 6 chg 0000 evt 0002
- [ 665.272249] ehci_hcd 0000:00:13.2: GetStatus port:1 status 001803 0 ACK POWER sig=j CSC CONNECT
- [ 665.272256] hub 2-0:1.0: port 1, status 0501, change 0001, 480 Mb/s
- [ 665.375637] hub 2-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x501
- [ 665.426598] ehci_hcd 0000:00:13.2: port 1 high speed
- [ 665.426603] ehci_hcd 0000:00:13.2: GetStatus port:1 status 001005 0 ACK POWER sig=se0 PE CONNECT
- [ 665.477547] usb 2-1: new high-speed USB device number 2 using ehci_hcd
- [ 665.528500] ehci_hcd 0000:00:13.2: port 1 high speed
- [ 665.528505] ehci_hcd 0000:00:13.2: GetStatus port:1 status 001005 0 ACK POWER sig=se0 PE CONNECT
- [ 665.592981] usb 2-1: default language 0x0409
- [ 665.595485] usb 2-1: udev 2, busnum 2, minor = 129
- [ 665.595488] usb 2-1: New USB device found, idVendor=154b, idProduct=004d
- [ 665.595490] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
- [ 665.595492] usb 2-1: Product: USB 2.0 FD
- [ 665.595493] usb 2-1: Manufacturer: PNY Technologies
- [ 665.595494] usb 2-1: SerialNumber: UT1B086700264
- [ 665.595625] usb 2-1: usb_probe_device
- [ 665.595629] usb 2-1: configuration #1 chosen from 1 choice
- [ 665.595713] usb 2-1: adding 2-1:1.0 (config #1, interface 0)
- [ 665.595758] usb-storage 2-1:1.0: usb_probe_interface
- [ 665.595762] usb-storage 2-1:1.0: usb_probe_interface - got id
- [ 665.596071] scsi8 : usb-storage 2-1:1.0
- [ 665.596200] drivers/usb/core/inode.c: creating file '002'
- [ 666.598774] scsi 8:0:0:0: Direct-Access PNY USB 2.0 FD 0.00 PQ: 0 ANSI: 4
- [ 666.599350] sd 8:0:0:0: Attached scsi generic sg4 type 0
- [ 666.601623] sd 8:0:0:0: [sdd] 31711232 512-byte logical blocks: (16.2 GB/15.1 GiB)
- [ 666.602637] sd 8:0:0:0: [sdd] Write Protect is off
- [ 666.602643] sd 8:0:0:0: [sdd] Mode Sense: 23 00 00 00
- [ 666.603756] sd 8:0:0:0: [sdd] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
- [ 666.611377] sdd: sdd1
- [ 666.626359] sd 8:0:0:0: [sdd] Attached SCSI removable disk
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement