Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- Table 'FACP' at 0xfcb90
- Table 'SSDT' at 0xfffc5ef2
- Table 'APIC' at 0xfcc04
- APIC: Found table at 0xfcc04
- APIC: Using the MADT enumerator.
- MADT: Found CPU APIC ID 0 ACPI ID 1: enabled
- SMP: Added CPU 0 (AP)
- MADT: Found CPU APIC ID 6 ACPI ID 2: enabled
- SMP: Added CPU 6 (AP)
- MADT: Found CPU APIC ID 1 ACPI ID 3: enabled
- SMP: Added CPU 1 (AP)
- MADT: Found CPU APIC ID 7 ACPI ID 4: enabled
- SMP: Added CPU 7 (AP)
- MADT: Found CPU APIC ID 2 ACPI ID 5: disabled
- MADT: Found CPU APIC ID 4 ACPI ID 6: disabled
- MADT: Found CPU APIC ID 3 ACPI ID 7: disabled
- MADT: Found CPU APIC ID 5 ACPI ID 8: disabled
- Copyright (c) 1992-2012 The FreeBSD Project.
- Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
- The Regents of the University of California. All rights reserved.
- FreeBSD is a registered trademark of The FreeBSD Foundation.
- FreeBSD 9.0-RELEASE #0: Tue Jan 3 07:46:30 UTC 2012
- [email protected]:/usr/obj/usr/src/sys/GENERIC amd64
- Table 'FACP' at 0xfcb90
- Table 'SSDT' at 0xfffc5ef2
- Table 'APIC' at 0xfcc04
- Table 'BOOT' at 0xfccae
- Table 'ASF!' at 0xfccd6
- Table 'MCFG' at 0xfcd3d
- Table 'HPET' at 0xfcd7b
- ACPI: No SRAT table found
- Preloaded elf kernel "/boot/kernel/kernel" at 0xffffffff813dc000.
- Preloaded elf obj module "/boot/kernel/geom_label.ko" at 0xffffffff813dc220.
- can't re-use a leaf (geom_label)!
- module_register: module g_label already exists!
- Module g_label failed to register: 17
- Calibrating TSC clock ... TSC clock: 3192061192 Hz
- CPU: Intel(R) Xeon(TM) CPU 3.20GHz (3192.06-MHz K8-class CPU)
- Origin = "GenuineIntel" Id = 0xf41 Family = f Model = 4 Stepping = 1
- Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MM
- X,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
- Features2=0x641d<SSE3,DTES64,MON,DS_CPL,CNXT-ID,CX16,xTPR>
- AMD Features=0x20100800<SYSCALL,NX,LM>
- TSC: P-state invariant
- real memory = 12884901888 (12288 MB)
- Physical memory chunk(s):
- 0x0000000000001000 - 0x000000000009bfff, 634880 bytes (155 pages)
- 0x0000000000100000 - 0x00000000001fffff, 1048576 bytes (256 pages)
- 0x0000000001414000 - 0x00000000cfe8bfff, 3467083776 bytes (846456 pages)
- 0x0000000100000000 - 0x0000000314243fff, 8927854592 bytes (2179652 pages)
- avail memory = 12316635136 (11746 MB)
- Event timer "LAPIC" quality 400
- ACPI APIC Table: <DELL PE1420 >
- INTR: Adding local APIC 6 as a target
- FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
- FreeBSD/SMP: 2 package(s) x 1 core(s) x 2 HTT threads
- cpu0 (BSP): APIC ID: 0
- cpu1 (AP/HT): APIC ID: 1
- cpu2 (AP): APIC ID: 6
- cpu3 (AP/HT): APIC ID: 7
- x86bios: IVT 0x000000-0x0004ff at 0xfffffe0000000000
- x86bios: SSEG 0x001000-0x001fff at 0xffffff800023a000
- x86bios: EBDA 0x09e000-0x09ffff at 0xfffffe000009e000
- x86bios: ROM 0x0a0000-0x0fefff at 0xfffffe00000a0000
- APIC: CPU 0 has ACPI ID 1
- APIC: CPU 1 has ACPI ID 3
- APIC: CPU 2 has ACPI ID 2
- APIC: CPU 3 has ACPI ID 4
- ULE: setup cpu 0
- ULE: setup cpu 1
- ULE: setup cpu 2
- ULE: setup cpu 3
- ACPI: RSDP 0xfec10 00014 (v00 DELL )
- ACPI: RSDT 0xfcb50 00040 (v01 DELL PE1420 00000007 ASL 00000061)
- ACPI: FACP 0xfcb90 00074 (v01 DELL PE1420 00000007 ASL 00000061)
- ACPI: DSDT 0xfffc2cf1 0300A (v01 DELL dt_ex 00001000 MSFT 0100000D)
- ACPI: FACS 0xcfe8cc00 00040
- ACPI: SSDT 0xfffc5ef2 00096 (v01 DELL st_ex 00001000 MSFT 0100000D)
- ACPI: APIC 0xfcc04 000AA (v01 DELL PE1420 00000007 ASL 00000061)
- ACPI: BOOT 0xfccae 00028 (v01 DELL PE1420 00000007 ASL 00000061)
- ACPI: ASF! 0xfccd6 00067 (v16 DELL PE1420 00000007 ASL 00000061)
- ACPI: MCFG 0xfcd3d 0003E (v01 DELL PE1420 00000007 ASL 00000061)
- ACPI: HPET 0xfcd7b 00038 (v01 DELL PE1420 00000007 ASL 00000061)
- MADT: Found IO APIC ID 8, Interrupt 0 at 0xfec00000
- ioapic0: Changing APIC ID to 8
- ioapic0: Routing external 8259A's -> intpin 0
- MADT: Found IO APIC ID 9, Interrupt 24 at 0xfec80000
- ioapic1: Changing APIC ID to 9
- MADT: Found IO APIC ID 10, Interrupt 48 at 0xfec80800
- ioapic2: Changing APIC ID to 10
- MADT: Interrupt override: source 0, irq 2
- ioapic0: Routing IRQ 0 -> intpin 2
- MADT: Interrupt override: source 9, irq 9
- ioapic0: intpin 9 trigger: level
- lapic: Routing NMI -> LINT1
- lapic: LINT1 trigger: level
- lapic: LINT1 polarity: high
- ioapic0 <Version 2.0> irqs 0-23 on motherboard
- ioapic1 <Version 2.0> irqs 24-47 on motherboard
- ioapic2 <Version 2.0> irqs 48-71 on motherboard
- lapic0: Forcing LINT1 to edge trigger
- cpu0 BSP:
- ID: 0x00000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff
- lint0: 0x00010700 lint1: 0x00008400 TPR: 0x00000000 SVR: 0x000001ff
- timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400
- snd_unit_init() u=0x00ff8000 [512] d=0x00007c00 [32] c=0x000003ff [1024]
- feeder_register: snd_unit=-1 snd_maxautovchans=16 latency=5 feeder_rate_min=1 feeder_rate_max=2016000 feeder_rate_round=25
- wlan: <802.11 Link Layer>
- kbd: new array size 4
- kbd1 at kbdmux0
- nfslock: pseudo-device
- mem: <memory>
- io: <I/O>
- null: <null device, zero device>
- random: <entropy source, Software, Yarrow>
- hptrr: RocketRAID 17xx/2xxx SATA controller driver v1.2
- acpi0: <DELL PE1420 > on motherboard
- PCIe: Memory Mapped configuration base @ 0xe0000000
- ioapic0: routing intpin 9 (ISA IRQ 9) to lapic 0 vector 48
- acpi0: Power Button (fixed)
- ACPI timer: 1/0 1/0 1/0 1/0 1/0 1/0 1/0 1/0 1/0 1/0 -> 10
- Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
- acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
- cpu0: <ACPI CPU> on acpi0
- cpu0: switching to generic Cx mode
- cpu1: <ACPI CPU> on acpi0
- cpu2: <ACPI CPU> on acpi0
- cpu3: <ACPI CPU> on acpi0
- pci_link0: Index IRQ Rtd Ref IRQs
- Initial Probe 0 11 N 0 3 4 5 6 7 9 10 11 12 15
- Validation 0 11 N 0 3 4 5 6 7 9 10 11 12 15
- After Disable 0 255 N 0 3 4 5 6 7 9 10 11 12 15
- pci_link1: Index IRQ Rtd Ref IRQs
- Initial Probe 0 10 N 0 3 4 5 6 7 9 10 11 12 15
- Validation 0 10 N 0 3 4 5 6 7 9 10 11 12 15
- After Disable 0 255 N 0 3 4 5 6 7 9 10 11 12 15
- pci_link2: Index IRQ Rtd Ref IRQs
- Initial Probe 0 9 N 0 3 4 5 6 7 9 10 11 12 15
- Validation 0 9 N 0 3 4 5 6 7 9 10 11 12 15
- After Disable 0 255 N 0 3 4 5 6 7 9 10 11 12 15
- pci_link3: Index IRQ Rtd Ref IRQs
- Initial Probe 0 10 N 0 3 4 5 6 7 9 10 11 12 15
- Validation 0 10 N 0 3 4 5 6 7 9 10 11 12 15
- After Disable 0 255 N 0 3 4 5 6 7 9 10 11 12 15
- pci_link4: Index IRQ Rtd Ref IRQs
- Initial Probe 0 255 N 0 3 4 5 6 7 9 10 11 12 15
- Validation 0 255 N 0 3 4 5 6 7 9 10 11 12 15
- After Disable 0 255 N 0 3 4 5 6 7 9 10 11 12 15
- pci_link5: Index IRQ Rtd Ref IRQs
- Initial Probe 0 255 N 0 3 4 5 6 7 9 10 11 12 15
- Validation 0 255 N 0 3 4 5 6 7 9 10 11 12 15
- After Disable 0 255 N 0 3 4 5 6 7 9 10 11 12 15
- pci_link6: Index IRQ Rtd Ref IRQs
- Initial Probe 0 255 N 0 3 4 5 6 7 9 10 11 12 15
- Validation 0 255 N 0 3 4 5 6 7 9 10 11 12 15
- After Disable 0 255 N 0 3 4 5 6 7 9 10 11 12 15
- pci_link7: Index IRQ Rtd Ref IRQs
- Initial Probe 0 5 N 0 3 4 5 6 7 9 10 11 12 15
- Validation 0 5 N 0 3 4 5 6 7 9 10 11 12 15
- After Disable 0 255 N 0 3 4 5 6 7 9 10 11 12 15
- hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
- hpet0: vendor 0x8086, rev 0x1, 14318180Hz 64bit, 3 timers, legacy route
- hpet0: t0: irqs 0x00f00000 (0), 64bit, periodic
- hpet0: t1: irqs 0x00f00000 (0)
- hpet0: t2: irqs 0x00f00800 (0)
- Timecounter "HPET" frequency 14318180 Hz quality 950
- ioapic0: routing intpin 20 (PCI IRQ 20) to lapic 0 vector 49
- Event timer "HPET" frequency 14318180 Hz quality 450
- Event timer "HPET1" frequency 14318180 Hz quality 440
- Event timer "HPET2" frequency 14318180 Hz quality 440
- acpi_button0: <Power Button> on acpi0
- pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
- pcib0: decoding 4 range 0-0xcf7
- pcib0: decoding 4 range 0xd00-0xffff
- pcib0: decoding 3 range 0xa0000-0xbffff
- pcib0: decoding 3 range 0xcff00000-0xdfffffff
- pcib0: decoding 3 range 0xf0000000-0xfebfffff
- pci0: <ACPI PCI bus> on pcib0
- pci0: domain=0, physical bus=0
- found-> vendor=0x8086, dev=0x3590, revid=0x09
- domain=0, bus=0, slot=0, func=0
- class=06-00-00, hdrtype=0x00, mfdev=1
- cmdreg=0x0106, statreg=0x0090, cachelnsz=0 (dwords)
- lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
- found-> vendor=0x8086, dev=0x3591, revid=0x09
- domain=0, bus=0, slot=0, func=1
- class=ff-00-00, hdrtype=0x00, mfdev=0
- cmdreg=0x0100, statreg=0x0000, cachelnsz=0 (dwords)
- lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
- found-> vendor=0x8086, dev=0x3595, revid=0x09
- domain=0, bus=0, slot=2, func=0
- class=06-04-00, hdrtype=0x01, mfdev=0
- cmdreg=0x0107, statreg=0x0010, cachelnsz=16 (dwords)
- lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns)
- intpin=a, irq=11
- powerspec 2 supports D0 D3 current D0
- MSI supports 2 messages
- pcib0: matched entry for 0.2.INTA
- pcib0: slot 2 INTA hardwired to IRQ 16
- found-> vendor=0x8086, dev=0x3596, revid=0x09
- domain=0, bus=0, slot=3, func=0
- class=06-04-00, hdrtype=0x01, mfdev=0
- cmdreg=0x0107, statreg=0x4018, cachelnsz=16 (dwords)
- lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns)
- intpin=a, irq=11
- powerspec 2 supports D0 D3 current D0
- MSI supports 2 messages
- pcib0: matched entry for 0.3.INTA
- pcib0: slot 3 INTA hardwired to IRQ 16
- found-> vendor=0x8086, dev=0x3597, revid=0x09
- domain=0, bus=0, slot=4, func=0
- class=06-04-00, hdrtype=0x01, mfdev=0
- cmdreg=0x0107, statreg=0x0010, cachelnsz=16 (dwords)
- lattimer=0x00 (0 ns), mingnt=0x0a (2500 ns), maxlat=0x00 (0 ns)
- intpin=a, irq=11
- powerspec 2 supports D0 D3 current D0
- MSI supports 2 messages
- pcib0: matched entry for 0.4.INTA
- pcib0: slot 4 INTA hardwired to IRQ 16
- found-> vendor=0x8086, dev=0x24d2, revid=0x02
- domain=0, bus=0, slot=29, func=0
- class=0c-03-00, hdrtype=0x00, mfdev=1
- cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
- lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
- intpin=a, irq=11
- map[20]: type I/O Port, range 32, base 0xff80, size 5, enabled
- pcib0: allocated type 4 (0xff80-0xff9f) for rid 20 of pci0:0:29:0
- pcib0: matched entry for 0.29.INTA
- pcib0: slot 29 INTA hardwired to IRQ 16
- found-> vendor=0x8086, dev=0x24d4, revid=0x02
- domain=0, bus=0, slot=29, func=1
- class=0c-03-00, hdrtype=0x00, mfdev=0
- cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
- lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
- intpin=b, irq=10
- map[20]: type I/O Port, range 32, base 0xff60, size 5, enabled
- pcib0: allocated type 4 (0xff60-0xff7f) for rid 20 of pci0:0:29:1
- pcib0: matched entry for 0.29.INTB
- pcib0: slot 29 INTB hardwired to IRQ 19
- found-> vendor=0x8086, dev=0x24d7, revid=0x02
- domain=0, bus=0, slot=29, func=2
- class=0c-03-00, hdrtype=0x00, mfdev=0
- cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
- lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
- intpin=c, irq=9
- map[20]: type I/O Port, range 32, base 0xff40, size 5, enabled
- pcib0: allocated type 4 (0xff40-0xff5f) for rid 20 of pci0:0:29:2
- pcib0: matched entry for 0.29.INTC
- pcib0: slot 29 INTC hardwired to IRQ 18
- found-> vendor=0x8086, dev=0x24de, revid=0x02
- domain=0, bus=0, slot=29, func=3
- class=0c-03-00, hdrtype=0x00, mfdev=0
- cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
- lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
- intpin=a, irq=11
- map[20]: type I/O Port, range 32, base 0xff20, size 5, enabled
- pcib0: allocated type 4 (0xff20-0xff3f) for rid 20 of pci0:0:29:3
- pcib0: matched entry for 0.29.INTA
- pcib0: slot 29 INTA hardwired to IRQ 16
- found-> vendor=0x8086, dev=0x24dd, revid=0x02
- domain=0, bus=0, slot=29, func=7
- class=0c-03-20, hdrtype=0x00, mfdev=0
- cmdreg=0x0106, statreg=0x0290, cachelnsz=0 (dwords)
- lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
- intpin=d, irq=5
- powerspec 2 supports D0 D3 current D0
- map[10]: type Memory, range 32, base 0xffa80800, size 10, enabled
- pcib0: matched entry for 0.29.INTD
- pcib0: slot 29 INTD hardwired to IRQ 23
- pcib0: allocated type 3 (0xcff00000-0xcff003ff) for rid 10 of pci0:0:29:7
- unknown: Lazy allocation of 0x400 bytes rid 0x10 type 3 at 0xcff00000
- found-> vendor=0x8086, dev=0x244e, revid=0xc2
- domain=0, bus=0, slot=30, func=0
- class=06-04-00, hdrtype=0x01, mfdev=0
- cmdreg=0x0107, statreg=0x0080, cachelnsz=0 (dwords)
- lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns)
- found-> vendor=0x8086, dev=0x24d0, revid=0x02
- domain=0, bus=0, slot=31, func=0
- class=06-01-00, hdrtype=0x00, mfdev=1
- cmdreg=0x010f, statreg=0x0280, cachelnsz=0 (dwords)
- lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
- found-> vendor=0x8086, dev=0x24db, revid=0x02
- domain=0, bus=0, slot=31, func=1
- class=01-01-8a, hdrtype=0x00, mfdev=0
- cmdreg=0x0007, statreg=0x0288, cachelnsz=0 (dwords)
- lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
- intpin=a, irq=9
- pcib0: allocated type 4 (0x1f0-0x1f7) for rid 10 of pci0:0:31:1
- pcib0: allocated type 4 (0x3f6-0x3f6) for rid 14 of pci0:0:31:1
- pcib0: allocated type 4 (0x170-0x177) for rid 18 of pci0:0:31:1
- pcib0: allocated type 4 (0x376-0x376) for rid 1c of pci0:0:31:1
- map[20]: type I/O Port, range 32, base 0xffa0, size 4, enabled
- pcib0: allocated type 4 (0xffa0-0xffaf) for rid 20 of pci0:0:31:1
- map[24]: type Memory, range 32, base 0xdffffc00, size 10, enabled
- pcib0: allocated type 3 (0xdffffc00-0xdfffffff) for rid 24 of pci0:0:31:1
- pcib0: matched entry for 0.31.INTA
- pcib0: slot 31 INTA hardwired to IRQ 18
- found-> vendor=0x8086, dev=0x24df, revid=0x02
- domain=0, bus=0, slot=31, func=2
- class=01-04-8f, hdrtype=0x00, mfdev=0
- cmdreg=0x0405, statreg=0x02a0, cachelnsz=0 (dwords)
- lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
- intpin=a, irq=9
- map[10]: type I/O Port, range 32, base 0xfe00, size 3, enabled
- pcib0: allocated type 4 (0xfe00-0xfe07) for rid 10 of pci0:0:31:2
- map[14]: type I/O Port, range 32, base 0xfe10, size 2, enabled
- pcib0: allocated type 4 (0xfe10-0xfe13) for rid 14 of pci0:0:31:2
- map[18]: type I/O Port, range 32, base 0xfe20, size 3, enabled
- pcib0: allocated type 4 (0xfe20-0xfe27) for rid 18 of pci0:0:31:2
- map[1c]: type I/O Port, range 32, base 0xfe30, size 2, enabled
- pcib0: allocated type 4 (0xfe30-0xfe33) for rid 1c of pci0:0:31:2
- map[20]: type I/O Port, range 32, base 0xfea0, size 4, enabled
- pcib0: allocated type 4 (0xfea0-0xfeaf) for rid 20 of pci0:0:31:2
- pcib0: matched entry for 0.31.INTA
- pcib0: slot 31 INTA hardwired to IRQ 18
- found-> vendor=0x8086, dev=0x24d3, revid=0x02
- domain=0, bus=0, slot=31, func=3
- class=0c-05-00, hdrtype=0x00, mfdev=0
- cmdreg=0x0001, statreg=0x0280, cachelnsz=0 (dwords)
- lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
- intpin=b, irq=10
- map[20]: type I/O Port, range 32, base 0xece0, size 5, enabled
- pcib0: allocated type 4 (0xece0-0xecff) for rid 20 of pci0:0:31:3
- pcib0: matched entry for 0.31.INTB
- pcib0: slot 31 INTB hardwired to IRQ 17
- pci0: <unknown> at device 0.1 (no driver attached)
- pcib1: <ACPI PCI-PCI bridge> irq 16 at device 2.0 on pci0
- pcib0: allocated type 4 (0xd000-0xdfff) for rid 1c of pcib1
- pcib0: allocated type 3 (0xdfe00000-0xdfefffff) for rid 20 of pcib1
- pcib1: domain 0
- pcib1: secondary bus 1
- pcib1: subordinate bus 3
- pcib1: I/O decode 0xd000-0xdfff
- pcib1: memory decode 0xdfe00000-0xdfefffff
- pcib1: no prefetched decode
- pci1: <ACPI PCI bus> on pcib1
- pci1: domain=0, physical bus=1
- found-> vendor=0x8086, dev=0x0329, revid=0x00
- domain=0, bus=1, slot=0, func=0
- class=06-04-00, hdrtype=0x01, mfdev=1
- cmdreg=0x0107, statreg=0x0010, cachelnsz=16 (dwords)
- lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns)
- powerspec 2 supports D0 D3 current D0
- MSI supports 1 message, 64 bit
- found-> vendor=0x8086, dev=0x032a, revid=0x00
- domain=0, bus=1, slot=0, func=2
- class=06-04-00, hdrtype=0x01, mfdev=1
- cmdreg=0x0107, statreg=0x0010, cachelnsz=16 (dwords)
- lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns)
- powerspec 2 supports D0 D3 current D0
- MSI supports 1 message, 64 bit
- pcib2: <ACPI PCI-PCI bridge> at device 0.0 on pci1
- pcib2: domain 0
- pcib2: secondary bus 2
- pcib2: subordinate bus 2
- pcib2: no prefetched decode
- pci2: <ACPI PCI bus> on pcib2
- pci2: domain=0, physical bus=2
- pcib3: <ACPI PCI-PCI bridge> at device 0.2 on pci1
- pcib1: allocated I/O port range (0xd000-0xdfff) for rid 1c of pcib3
- pcib1: allocated memory range (0xdfe00000-0xdfefffff) for rid 20 of pcib3
- pcib3: domain 0
- pcib3: secondary bus 3
- pcib3: subordinate bus 3
- pcib3: I/O decode 0xd000-0xdfff
- pcib3: memory decode 0xdfe00000-0xdfefffff
- pcib3: no prefetched decode
- pci3: <ACPI PCI bus> on pcib3
- pci3: domain=0, physical bus=3
- found-> vendor=0x8086, dev=0x1026, revid=0x04
- domain=0, bus=3, slot=14, func=0
- class=02-00-00, hdrtype=0x00, mfdev=0
- cmdreg=0x0117, statreg=0x0230, cachelnsz=16 (dwords)
- lattimer=0x40 (1920 ns), mingnt=0xff (63750 ns), maxlat=0x00 (0 ns)
- intpin=a, irq=11
- powerspec 2 supports D0 D3 current D0
- MSI supports 1 message, 64 bit
- map[10]: type Memory, range 64, base 0xdfee0000, size 17, enabled
- pcib3: allocated memory range (0xdfee0000-0xdfefffff) for rid 10 of pci0:3:14:0
- map[20]: type I/O Port, range 32, base 0xdcc0, size 6, enabled
- pcib3: allocated I/O port range (0xdcc0-0xdcff) for rid 20 of pci0:3:14:0
- pcib3: matched entry for 3.14.INTA
- pcib3: slot 14 INTA hardwired to IRQ 48
- em0: <Intel(R) PRO/1000 Legacy Network Connection 1.0.3> port 0xdcc0-0xdcff mem 0xdfee0000-0xdfefffff irq 48 at device 14.0 on pci3
- ioapic2: routing intpin 0 (PCI IRQ 48) to lapic 0 vector 50
- em0: bpf attached
- em0: Ethernet address: 00:11:43:15:b9:dc
- pcib4: <ACPI PCI-PCI bridge> irq 16 at device 3.0 on pci0
- pcib0: allocated type 3 (0xdfd00000-0xdfdfffff) for rid 20 of pcib4
- pcib4: domain 0
- pcib4: secondary bus 4
- pcib4: subordinate bus 4
- pcib4: memory decode 0xdfd00000-0xdfdfffff
- pcib4: no prefetched decode
- pci4: <ACPI PCI bus> on pcib4
- pci4: domain=0, physical bus=4
- pcib5: <ACPI PCI-PCI bridge> irq 16 at device 4.0 on pci0
- pcib0: allocated type 4 (0xc000-0xcfff) for rid 1c of pcib5
- pcib0: allocated type 3 (0xdfb00000-0xdfcfffff) for rid 20 of pcib5
- pcib0: allocated type 3 (0xd0000000-0xd7ffffff) for rid 24 of pcib5
- pcib5: domain 0
- pcib5: secondary bus 5
- pcib5: subordinate bus 5
- pcib5: I/O decode 0xc000-0xcfff
- pcib5: memory decode 0xdfb00000-0xdfcfffff
- pcib5: prefetched decode 0xd0000000-0xd7ffffff
- pci5: <ACPI PCI bus> on pcib5
- pci5: domain=0, physical bus=5
- found-> vendor=0x1002, dev=0x5b60, revid=0x00
- domain=0, bus=5, slot=0, func=0
- class=03-00-00, hdrtype=0x00, mfdev=1
- cmdreg=0x0103, statreg=0x0010, cachelnsz=16 (dwords)
- lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
- intpin=a, irq=11
- powerspec 2 supports D0 D1 D2 D3 current D0
- MSI supports 1 message, 64 bit
- map[10]: type Prefetchable Memory, range 64, base 0xd0000000, size 27, enabled
- pcib5: allocated prefetch range (0xd0000000-0xd7ffffff) for rid 10 of pci0:5:0:0
- map[18]: type Memory, range 64, base 0xdfbe0000, size 16, enabled
- pcib5: allocated memory range (0xdfbe0000-0xdfbeffff) for rid 18 of pci0:5:0:0
- map[20]: type I/O Port, range 32, base 0xcc00, size 8, enabled
- pcib5: allocated I/O port range (0xcc00-0xccff) for rid 20 of pci0:5:0:0
- pcib5: matched entry for 5.0.INTA
- pcib5: slot 0 INTA hardwired to IRQ 16
- found-> vendor=0x1002, dev=0x5b70, revid=0x00
- domain=0, bus=5, slot=0, func=1
- class=03-80-00, hdrtype=0x00, mfdev=0
- cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords)
- lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
- powerspec 2 supports D0 D1 D2 D3 current D0
- map[10]: type Memory, range 64, base 0xdfbf0000, size 16, enabled
- pcib5: allocated memory range (0xdfbf0000-0xdfbfffff) for rid 10 of pci0:5:0:1
- vgapci0: <VGA-compatible display> port 0xcc00-0xccff mem 0xd0000000-0xd7ffffff,0xdfbe0000-0xdfbeffff irq 16 at device 0.0 on pci5
- vgapci1: <VGA-compatible display> mem 0xdfbf0000-0xdfbfffff at device 0.1 on pci5
- uhci0: <Intel 82801EB (ICH5) USB controller USB-A> port 0xff80-0xff9f irq 16 at device 29.0 on pci0
- ioapic0: routing intpin 16 (PCI IRQ 16) to lapic 0 vector 51
- usbus0: <Intel 82801EB (ICH5) USB controller USB-A> on uhci0
- usbus0: bpf attached
- uhci0: usbpf: Attached
- uhci1: <Intel 82801EB (ICH5) USB controller USB-B> port 0xff60-0xff7f irq 19 at device 29.1 on pci0
- ioapic0: routing intpin 19 (PCI IRQ 19) to lapic 0 vector 52
- usbus1: <Intel 82801EB (ICH5) USB controller USB-B> on uhci1
- usbus1: bpf attached
- uhci1: usbpf: Attached
- uhci2: <Intel 82801EB (ICH5) USB controller USB-C> port 0xff40-0xff5f irq 18 at device 29.2 on pci0
- ioapic0: routing intpin 18 (PCI IRQ 18) to lapic 0 vector 53
- usbus2: <Intel 82801EB (ICH5) USB controller USB-C> on uhci2
- usbus2: bpf attached
- uhci2: usbpf: Attached
- uhci3: <Intel 82801EB (ICH5) USB controller USB-D> port 0xff20-0xff3f irq 16 at device 29.3 on pci0
- usbus3: <Intel 82801EB (ICH5) USB controller USB-D> on uhci3
- usbus3: bpf attached
- uhci3: usbpf: Attached
- ehci0: <Intel 82801EB/R (ICH5) USB 2.0 controller> mem 0xcff00000-0xcff003ff irq 23 at device 29.7 on pci0
- ioapic0: routing intpin 23 (PCI IRQ 23) to lapic 0 vector 54
- usbus4: EHCI version ff.ff
- usbus4: reset timeout
- usbus4: reset timeout
- ehci0: USB init failed err=18
- unknown: reset timeout
- device_attach: ehci0 attach returned 6
- pcib6: <ACPI PCI-PCI bridge> at device 30.0 on pci0
- pcib6: domain 0
- pcib6: secondary bus 6
- pcib6: subordinate bus 6
- pcib6: no prefetched decode
- pcib6: Subtractively decoded bridge.
- pci6: <ACPI PCI bus> on pcib6
- pci6: domain=0, physical bus=6
- isab0: <PCI-ISA bridge> at device 31.0 on pci0
- isa0: <ISA bus> on isab0
- atapci0: <Intel ICH5 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf mem 0xdffffc00-0xdfffffff irq 18 at device 31.1 on pci0
- ata0: <ATA channel 0> on atapci0
- ioapic0: routing intpin 14 (ISA IRQ 14) to lapic 0 vector 54
- ata1: <ATA channel 1> on atapci0
- ioapic0: routing intpin 15 (ISA IRQ 15) to lapic 0 vector 55
- atapci1: <Intel ICH5 SATA150 controller> port 0xfe00-0xfe07,0xfe10-0xfe13,0xfe20-0xfe27,0xfe30-0xfe33,0xfea0-0xfeaf irq 18 at device 31.2 on pci0
- ata2: <ATA channel 0> on atapci1
- ata3: <ATA channel 1> on atapci1
- pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
- atrtc0: <AT realtime clock> port 0x70-0x7f irq 8 on acpi0
- atrtc0: registered as a time-of-day clock (resolution 1000000us, adjustment 0.500000000s)
- ioapic0: routing intpin 8 (ISA IRQ 8) to lapic 0 vector 56
- Event timer "RTC" frequency 32768 Hz quality 0
- attimer0: <AT timer> port 0x40-0x5f irq 0 on acpi0
- Timecounter "i8254" frequency 1193182 Hz quality 0
- ioapic0: routing intpin 2 (ISA IRQ 0) to lapic 0 vector 57
- Event timer "i8254" frequency 1193182 Hz quality 100
- fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
- fdc0: ic_type 90 part_id 80
- ioapic0: routing intpin 6 (ISA IRQ 6) to lapic 0 vector 58
- fd0: <1440-KB 3.5" drive> on fdc0 drive 0
- atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
- atkbd0: <AT Keyboard> irq 1 on atkbdc0
- atkbd: the current kbd controller command byte 0045
- atkbd: keyboard ID 0xffffffff (1)
- atkbd: failed to reset the keyboard.
- kbd0 at atkbd0
- kbd0: atkbd0, AT 84 (1), config:0x0, flags:0x3d0000
- ioapic0: routing intpin 1 (ISA IRQ 1) to lapic 0 vector 59
- atkbd0: [GIANT-LOCKED]
- psm0: unable to allocate IRQ
- psmcpnp0: <PS/2 mouse port> irq 12 on acpi0
- psm0: current command byte:0045
- psm0: failed to reset the aux device.
- ppc0: using extended I/O port range
- ppc0: SPP ECP ECP+EPP
- ppc0: <Parallel port> port 0x378-0x37f,0x778-0x77f irq 7 on acpi0
- ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
- ppc0: FIFO with 16/16/8 bytes threshold
- ioapic0: routing intpin 7 (ISA IRQ 7) to lapic 0 vector 60
- ppbus0: <Parallel port bus> on ppc0
- plip0: <PLIP network interface> on ppbus0
- plip0: bpf attached
- lpt0: <Printer> on ppbus0
- lpt0: Interrupt-driven port
- ppi0: <Parallel I/O> on ppbus0
- uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
- ioapic0: routing intpin 4 (ISA IRQ 4) to lapic 0 vector 61
- uart0: fast interrupt
- uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
- ioapic0: routing intpin 3 (ISA IRQ 3) to lapic 0 vector 62
- uart1: fast interrupt
- acpi0: wakeup code va 0xffffff8344bed000 pa 0x4000
- ex_isa_identify()
- ahc_isa_probe 0: ioport 0xc00 alloc failed
- ahc_isa_probe 1: ioport 0x1c00 alloc failed
- ahc_isa_probe 2: ioport 0x2c00 alloc failed
- ahc_isa_probe 3: ioport 0x3c00 alloc failed
- ahc_isa_probe 4: ioport 0x4c00 alloc failed
- ahc_isa_probe 5: ioport 0x5c00 alloc failed
- ahc_isa_probe 6: ioport 0x6c00 alloc failed
- ahc_isa_probe 7: ioport 0x7c00 alloc failed
- ahc_isa_probe 8: ioport 0x8c00 alloc failed
- ahc_isa_probe 9: ioport 0x9c00 alloc failed
- ahc_isa_probe 10: ioport 0xac00 alloc failed
- ahc_isa_probe 11: ioport 0xbc00 alloc failed
- ahc_isa_probe 12: ioport 0xcc00 alloc failed
- ahc_isa_probe 13: ioport 0xdc00 alloc failed
- ahc_isa_probe 14: ioport 0xec00 alloc failed
- pcib0: allocated type 3 (0xa0000-0xa07ff) for rid 0 of orm0
- pcib0: allocated type 3 (0xa0800-0xa0fff) for rid 0 of orm0
- pcib0: allocated type 3 (0xa1000-0xa17ff) for rid 0 of orm0
- pcib0: allocated type 3 (0xa1800-0xa1fff) for rid 0 of orm0
- pcib0: allocated type 3 (0xa2000-0xa27ff) for rid 0 of orm0
- pcib0: allocated type 3 (0xa2800-0xa2fff) for rid 0 of orm0
- pcib0: allocated type 3 (0xa3000-0xa37ff) for rid 0 of orm0
- pcib0: allocated type 3 (0xa3800-0xa3fff) for rid 0 of orm0
- pcib0: allocated type 3 (0xa4000-0xa47ff) for rid 0 of orm0
- pcib0: allocated type 3 (0xa4800-0xa4fff) for rid 0 of orm0
- pcib0: allocated type 3 (0xa5000-0xa57ff) for rid 0 of orm0
- pcib0: allocated type 3 (0xa5800-0xa5fff) for rid 0 of orm0
- pcib0: allocated type 3 (0xa6000-0xa67ff) for rid 0 of orm0
- pcib0: allocated type 3 (0xa6800-0xa6fff) for rid 0 of orm0
- pcib0: allocated type 3 (0xa7000-0xa77ff) for rid 0 of orm0
- pcib0: allocated type 3 (0xa7800-0xa7fff) for rid 0 of orm0
- pcib0: allocated type 3 (0xa8000-0xa87ff) for rid 0 of orm0
- pcib0: allocated type 3 (0xa8800-0xa8fff) for rid 0 of orm0
- pcib0: allocated type 3 (0xa9000-0xa97ff) for rid 0 of orm0
- pcib0: allocated type 3 (0xa9800-0xa9fff) for rid 0 of orm0
- pcib0: allocated type 3 (0xaa000-0xaa7ff) for rid 0 of orm0
- pcib0: allocated type 3 (0xaa800-0xaafff) for rid 0 of orm0
- pcib0: allocated type 3 (0xab000-0xab7ff) for rid 0 of orm0
- pcib0: allocated type 3 (0xab800-0xabfff) for rid 0 of orm0
- pcib0: allocated type 3 (0xac000-0xac7ff) for rid 0 of orm0
- pcib0: allocated type 3 (0xac800-0xacfff) for rid 0 of orm0
- pcib0: allocated type 3 (0xad000-0xad7ff) for rid 0 of orm0
- pcib0: allocated type 3 (0xad800-0xadfff) for rid 0 of orm0
- pcib0: allocated type 3 (0xae000-0xae7ff) for rid 0 of orm0
- pcib0: allocated type 3 (0xae800-0xaefff) for rid 0 of orm0
- pcib0: allocated type 3 (0xaf000-0xaf7ff) for rid 0 of orm0
- pcib0: allocated type 3 (0xaf800-0xaffff) for rid 0 of orm0
- pcib0: allocated type 3 (0xb0000-0xb07ff) for rid 0 of orm0
- pcib0: allocated type 3 (0xb0800-0xb0fff) for rid 0 of orm0
- pcib0: allocated type 3 (0xb1000-0xb17ff) for rid 0 of orm0
- pcib0: allocated type 3 (0xb1800-0xb1fff) for rid 0 of orm0
- pcib0: allocated type 3 (0xb2000-0xb27ff) for rid 0 of orm0
- pcib0: allocated type 3 (0xb2800-0xb2fff) for rid 0 of orm0
- pcib0: allocated type 3 (0xb3000-0xb37ff) for rid 0 of orm0
- pcib0: allocated type 3 (0xb3800-0xb3fff) for rid 0 of orm0
- pcib0: allocated type 3 (0xb4000-0xb47ff) for rid 0 of orm0
- pcib0: allocated type 3 (0xb4800-0xb4fff) for rid 0 of orm0
- pcib0: allocated type 3 (0xb5000-0xb57ff) for rid 0 of orm0
- pcib0: allocated type 3 (0xb5800-0xb5fff) for rid 0 of orm0
- pcib0: allocated type 3 (0xb6000-0xb67ff) for rid 0 of orm0
- pcib0: allocated type 3 (0xb6800-0xb6fff) for rid 0 of orm0
- pcib0: allocated type 3 (0xb7000-0xb77ff) for rid 0 of orm0
- pcib0: allocated type 3 (0xb7800-0xb7fff) for rid 0 of orm0
- pcib0: allocated type 3 (0xb8000-0xb87ff) for rid 0 of orm0
- pcib0: allocated type 3 (0xb8800-0xb8fff) for rid 0 of orm0
- pcib0: allocated type 3 (0xb9000-0xb97ff) for rid 0 of orm0
- pcib0: allocated type 3 (0xb9800-0xb9fff) for rid 0 of orm0
- pcib0: allocated type 3 (0xba000-0xba7ff) for rid 0 of orm0
- pcib0: allocated type 3 (0xba800-0xbafff) for rid 0 of orm0
- pcib0: allocated type 3 (0xbb000-0xbb7ff) for rid 0 of orm0
- pcib0: allocated type 3 (0xbb800-0xbbfff) for rid 0 of orm0
- pcib0: allocated type 3 (0xbc000-0xbc7ff) for rid 0 of orm0
- pcib0: allocated type 3 (0xbc800-0xbcfff) for rid 0 of orm0
- pcib0: allocated type 3 (0xbd000-0xbd7ff) for rid 0 of orm0
- pcib0: allocated type 3 (0xbd800-0xbdfff) for rid 0 of orm0
- pcib0: allocated type 3 (0xbe000-0xbe7ff) for rid 0 of orm0
- pcib0: allocated type 3 (0xbe800-0xbefff) for rid 0 of orm0
- pcib0: allocated type 3 (0xbf000-0xbf7ff) for rid 0 of orm0
- pcib0: allocated type 3 (0xbf800-0xbffff) for rid 0 of orm0
- isa_probe_children: disabling PnP devices
- atkbdc: atkbdc0 already exists; skipping it
- atrtc: atrtc0 already exists; skipping it
- attimer: attimer0 already exists; skipping it
- fdc: fdc0 already exists; skipping it
- ppc: ppc0 already exists; skipping it
- sc: sc0 already exists; skipping it
- uart: uart0 already exists; skipping it
- uart: uart1 already exists; skipping it
- isa_probe_children: probing non-PnP devices
- sc0: <System console> at flags 0x100 on isa0
- sc0: VGA <16 virtual consoles, flags=0x300>
- sc0: fb0, kbd1, terminal emulator: scteken (teken terminal)
- vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
- pcib0: allocated type 4 (0x3c0-0x3df) for rid 0 of vga0
- pcib0: allocated type 3 (0xa0000-0xbffff) for rid 0 of vga0
- isa_probe_children: probing PnP devices
- p4tcc0: <CPU Frequency Thermal Control> on cpu0
- p4tcc1: <CPU Frequency Thermal Control> on cpu1
- p4tcc2: <CPU Frequency Thermal Control> on cpu2
- p4tcc3: <CPU Frequency Thermal Control> on cpu3
- Device configuration finished.
- procfs registered
- Timecounters tick every 1.000 msec
- vlan: initialized, using hash tables with chaining
- lo0: bpf attached
- hptrr: no controller detected.
- The GEOM class LABEL is already loaded.
- usbus0: 12Mbps Full Speed USB v1.0
- usbus1: 12Mbps Full Speed USB v1.0
- usbus2: 12Mbps Full Speed USB v1.0
- usbus3: 12Mbps Full Speed USB v1.0
- ata0: reset tp1 mask=00 ostat0=ff ostat1=ff
- ata1: reset tp1 mask=00 ostat0=ff ostat1=ff
- ugen0.1: <Intel> at usbus0
- uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
- ugen1.1: <Intel> at usbus1
- uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
- ugen2.1: <Intel> at usbus2
- uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
- ugen3.1: <Intel> at usbus3
- uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
- uhub0: 2 ports with 2 removable, self powered
- uhub1: 2 ports with 2 removable, self powered
- uhub2: 2 ports with 2 removable, self powered
- uhub3: 2 ports with 2 removable, self powered
- ata2: SATA reset: ports status=0x00
- ata2: p0: SATA connect timeout status=00000004
- ata3: SATA reset: ports status=0x00
- ata3: p0: SATA connect timeout status=00000004
- lapic1: Forcing LINT1 to edge trigger
- SMP: AP CPU #1 Launched!
- cpu1 AP:
- ID: 0x01000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff
- lint0: 0x00010700 lint1: 0x00008400 TPR: 0x00000000 SVR: 0x000001ff
- timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400
- lapic6: Forcing LINT1 to edge trigger
- SMP: AP CPU #2 Launched!
- cpu2 AP:
- ID: 0x06000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff
- lint0: 0x00010700 lint1: 0x00008400 TPR: 0x00000000 SVR: 0x000001ff
- timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400
- lapic7: Forcing LINT1 to edge trigger
- SMP: AP CPU #3 Launched!
- cpu3 AP:
- ID: 0x07000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff
- lint0: 0x00010700 lint1: 0x00008400 TPR: 0x00000000 SVR: 0x000001ff
- timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400
- SMP: failed TSC synchronization test
- TSC timecounter discards lower 8 bit(s)
- Timecounter "TSC-low" frequency 12468989 Hz quality -100
- ugen0.2: <vendor 0x1a40> at usbus0
Add Comment
Please, Sign In to add comment