Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- root@yak:/mnt/md1# smartctl -x /dev/sda
- smartctl 6.0 2012-10-10 r3643 [armv4l-linux-3.8.0] (localbuild)
- Copyright (C) 2002-12, Bruce Allen, Christian Franke, www.smartmontools.org
- === START OF INFORMATION SECTION ===
- Model Family: SAMSUNG SpinPoint F1 DT
- Device Model: SAMSUNG HD103UJ
- Serial Number: S13PJ1KQ100469
- LU WWN Device Id: 5 0000f0 00b014096
- Firmware Version: 1AA01108
- User Capacity: 1,000,204,886,016 bytes [1.00 TB]
- Sector Size: 512 bytes logical/physical
- Device is: In smartctl database [for details use: -P show]
- ATA Version is: ATA/ATAPI-7, ATA8-ACS T13/1699-D revision 3b
- Local Time is: Thu Aug 14 09:06:53 2014 CEST
- SMART support is: Available - device has SMART capability.
- SMART support is: Enabled
- AAM feature is: Disabled
- APM feature is: Disabled
- Rd look-ahead is: Enabled
- Write cache is: Enabled
- ATA Security is: Disabled, NOT FROZEN [SEC1]
- === START OF READ SMART DATA SECTION ===
- SMART overall-health self-assessment test result: PASSED
- General SMART Values:
- Offline data collection status: (0x00) Offline data collection activity
- was never started.
- Auto Offline Data Collection: Disabled.
- Self-test execution status: ( 0) The previous self-test routine completed
- without error or no self-test has ever
- been run.
- Total time to complete Offline
- data collection: (11609) seconds.
- Offline data collection
- capabilities: (0x7b) SMART execute Offline immediate.
- Auto Offline data collection on/off support.
- Suspend Offline collection upon new
- command.
- Offline surface scan supported.
- Self-test supported.
- Conveyance Self-test supported.
- Selective Self-test supported.
- SMART capabilities: (0x0003) Saves SMART data before entering
- power-saving mode.
- Supports SMART auto save timer.
- Error logging capability: (0x01) Error logging supported.
- General Purpose Logging supported.
- Short self-test routine
- recommended polling time: ( 2) minutes.
- Extended self-test routine
- recommended polling time: ( 194) minutes.
- Conveyance self-test routine
- recommended polling time: ( 21) minutes.
- SCT capabilities: (0x003f) SCT Status supported.
- SCT Error Recovery Control supported.
- SCT Feature Control supported.
- SCT Data Table supported.
- SMART Attributes Data Structure revision number: 16
- Vendor Specific SMART Attributes with Thresholds:
- ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
- 1 Raw_Read_Error_Rate POSR-- 100 100 051 - 65
- 3 Spin_Up_Time POS--- 078 078 011 - 7580
- 4 Start_Stop_Count -O--CK 099 099 000 - 868
- 5 Reallocated_Sector_Ct PO--CK 095 095 010 - 204
- 7 Seek_Error_Rate POSR-- 100 100 051 - 0
- 8 Seek_Time_Performance P-S--K 100 100 015 - 10031
- 9 Power_On_Hours -O--CK 096 096 000 - 20386
- 10 Spin_Retry_Count PO--CK 100 100 051 - 0
- 11 Calibration_Retry_Count -O--C- 100 100 000 - 1
- 12 Power_Cycle_Count -O--CK 099 099 000 - 844
- 13 Read_Soft_Error_Rate -OSR-- 100 100 000 - 65
- 183 Runtime_Bad_Block -O--CK 100 100 000 - 0
- 184 End-to-End_Error PO--CK 100 100 099 - 0
- 187 Reported_Uncorrect -O--CK 100 100 000 - 149
- 188 Command_Timeout -O--CK 100 100 000 - 0
- 190 Airflow_Temperature_Cel -O---K 076 048 000 - 24 (Min/Max 15/24)
- 194 Temperature_Celsius -O---K 064 048 000 - 36 (Min/Max 15/36)
- 195 Hardware_ECC_Recovered -O-RC- 100 100 000 - 11765
- 196 Reallocated_Event_Count -O--CK 100 100 000 - 0
- 197 Current_Pending_Sector -O--C- 100 100 000 - 2
- 198 Offline_Uncorrectable ----CK 097 097 000 - 143
- 199 UDMA_CRC_Error_Count -OSRCK 100 100 000 - 0
- 200 Multi_Zone_Error_Rate -O-R-- 100 100 000 - 0
- 201 Soft_Read_Error_Rate -O-R-- 253 253 000 - 0
- ||||||_ K auto-keep
- |||||__ C event count
- ||||___ R error rate
- |||____ S speed/performance
- ||_____ O updated online
- |______ P prefailure warning
- General Purpose Log Directory Version 1
- SMART Log Directory Version 1 [multi-sector log support]
- GP/S Log at address 0x00 has 1 sectors [Log Directory]
- SMART Log at address 0x01 has 1 sectors [Summary SMART error log]
- SMART Log at address 0x02 has 2 sectors [Comprehensive SMART error log]
- GP Log at address 0x03 has 2 sectors [Ext. Comprehensive SMART error log]
- SMART Log at address 0x06 has 1 sectors [SMART self-test log]
- GP Log at address 0x07 has 2 sectors [Extended self-test log]
- SMART Log at address 0x09 has 1 sectors [Selective self-test log]
- GP Log at address 0x10 has 1 sectors [NCQ Command Error log]
- GP Log at address 0x11 has 1 sectors [SATA Phy Event Counters]
- GP/S Log at address 0x80 has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x81 has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x82 has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x83 has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x84 has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x85 has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x86 has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x87 has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x88 has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x89 has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x8a has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x8b has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x8c has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x8d has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x8e has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x8f has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x90 has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x91 has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x92 has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x93 has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x94 has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x95 has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x96 has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x97 has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x98 has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x99 has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x9a has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x9b has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x9c has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x9d has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x9e has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x9f has 16 sectors [Host vendor specific log]
- GP/S Log at address 0xe0 has 1 sectors [SCT Command/Status]
- GP/S Log at address 0xe1 has 1 sectors [SCT Data Transfer]
- SMART Extended Comprehensive Error Log Version: 1 (2 sectors)
- Device Error Count: 94 (device log contains only the most recent 8 errors)
- CR = Command Register
- FEATR = Features Register
- COUNT = Count (was: Sector Count) Register
- LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
- LH = LBA High (was: Cylinder High) Register ] LBA
- LM = LBA Mid (was: Cylinder Low) Register ] Register
- LL = LBA Low (was: Sector Number) Register ]
- DV = Device (was: Device/Head) Register
- DC = Device Control Register
- ER = Error register
- ST = Status register
- Powered_Up_Time is measured from power on, and printed as
- DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
- SS=sec, and sss=millisec. It "wraps" after 49.710 days.
- Error 94 [5] occurred at disk power-on lifetime: 14250 hours (593 days + 18 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER -- ST COUNT LBA_48 LH LM LL DV DC
- -- -- -- == -- == == == -- -- -- -- --
- 40 -- 51 00 00 00 00 01 0b 98 a6 e1 00 Error: UNC at LBA = 0x010b98a6 = 17537190
- Commands leading to the command that caused the error were:
- CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
- -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
- c8 00 00 00 08 00 00 00 0b 98 a3 e1 08 00:02:43.350 READ DMA
- 27 00 00 00 00 00 00 00 00 00 00 e0 08 00:02:43.340 READ NATIVE MAX ADDRESS EXT
- ec 00 00 00 00 00 00 00 00 00 00 a0 08 00:02:43.330 IDENTIFY DEVICE
- ef 00 03 00 46 00 00 00 00 00 00 a0 08 00:02:43.330 SET FEATURES [Set transfer mode]
- 27 00 00 00 00 00 00 00 00 00 00 e0 08 00:02:43.330 READ NATIVE MAX ADDRESS EXT
- Error 93 [4] occurred at disk power-on lifetime: 14250 hours (593 days + 18 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER -- ST COUNT LBA_48 LH LM LL DV DC
- -- -- -- == -- == == == -- -- -- -- --
- 40 -- 51 00 00 00 00 01 0b 98 a6 e1 00 Error: UNC at LBA = 0x010b98a6 = 17537190
- Commands leading to the command that caused the error were:
- CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
- -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
- c8 00 00 00 08 00 00 00 0b 98 a3 e1 08 00:02:42.350 READ DMA
- 27 00 00 00 00 00 00 00 00 00 00 e0 08 00:02:42.330 READ NATIVE MAX ADDRESS EXT
- ec 00 00 00 00 00 00 00 00 00 00 a0 08 00:02:42.330 IDENTIFY DEVICE
- ef 00 03 00 46 00 00 00 00 00 00 a0 08 00:02:42.320 SET FEATURES [Set transfer mode]
- 27 00 00 00 00 00 00 00 00 00 00 e0 08 00:02:42.320 READ NATIVE MAX ADDRESS EXT
- Error 92 [3] occurred at disk power-on lifetime: 14250 hours (593 days + 18 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER -- ST COUNT LBA_48 LH LM LL DV DC
- -- -- -- == -- == == == -- -- -- -- --
- 40 -- 51 00 00 00 00 01 0b 98 a6 e1 00 Error: UNC at LBA = 0x010b98a6 = 17537190
- Commands leading to the command that caused the error were:
- CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
- -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
- c8 00 00 00 08 00 00 00 0b 98 a3 e1 08 00:02:41.340 READ DMA
- 27 00 00 00 00 00 00 00 00 00 00 e0 08 00:02:41.330 READ NATIVE MAX ADDRESS EXT
- ec 00 00 00 00 00 00 00 00 00 00 a0 08 00:02:41.320 IDENTIFY DEVICE
- ef 00 03 00 46 00 00 00 00 00 00 a0 08 00:02:41.320 SET FEATURES [Set transfer mode]
- 27 00 00 00 00 00 00 00 00 00 00 e0 08 00:02:41.320 READ NATIVE MAX ADDRESS EXT
- Error 91 [2] occurred at disk power-on lifetime: 14250 hours (593 days + 18 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER -- ST COUNT LBA_48 LH LM LL DV DC
- -- -- -- == -- == == == -- -- -- -- --
- 40 -- 51 00 00 00 00 01 0b 98 a6 e1 00 Error: UNC at LBA = 0x010b98a6 = 17537190
- Commands leading to the command that caused the error were:
- CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
- -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
- c8 00 00 00 08 00 00 00 0b 98 a3 e1 08 00:02:40.320 READ DMA
- 27 00 00 00 00 00 00 00 00 00 00 e0 08 00:02:40.300 READ NATIVE MAX ADDRESS EXT
- ec 00 00 00 00 00 00 00 00 00 00 a0 08 00:02:40.290 IDENTIFY DEVICE
- ef 00 03 00 46 00 00 00 00 00 00 a0 08 00:02:40.290 SET FEATURES [Set transfer mode]
- 27 00 00 00 00 00 00 00 00 00 00 e0 08 00:02:40.290 READ NATIVE MAX ADDRESS EXT
- Error 90 [1] occurred at disk power-on lifetime: 14250 hours (593 days + 18 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER -- ST COUNT LBA_48 LH LM LL DV DC
- -- -- -- == -- == == == -- -- -- -- --
- 40 -- 51 00 00 00 00 01 0b 98 a6 e1 00 Error: UNC at LBA = 0x010b98a6 = 17537190
- Commands leading to the command that caused the error were:
- CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
- -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
- c8 00 00 00 08 00 00 00 0b 98 a3 e1 08 00:02:39.250 READ DMA
- 27 00 00 00 00 00 00 00 00 00 00 e0 08 00:02:39.230 READ NATIVE MAX ADDRESS EXT
- ec 00 00 00 00 00 00 00 00 00 00 a0 08 00:02:39.230 IDENTIFY DEVICE
- ef 00 03 00 46 00 00 00 00 00 00 a0 08 00:02:39.230 SET FEATURES [Set transfer mode]
- 27 00 00 00 00 00 00 00 00 00 00 e0 08 00:02:39.220 READ NATIVE MAX ADDRESS EXT
- Error 89 [0] occurred at disk power-on lifetime: 14250 hours (593 days + 18 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER -- ST COUNT LBA_48 LH LM LL DV DC
- -- -- -- == -- == == == -- -- -- -- --
- 40 -- 51 00 00 00 00 01 0b 98 a6 e1 00 Error: UNC at LBA = 0x010b98a6 = 17537190
- Commands leading to the command that caused the error were:
- CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
- -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
- c8 00 00 00 08 00 00 00 0b 98 a3 e1 08 00:02:38.190 READ DMA
- 27 00 00 00 00 00 00 00 00 00 00 e0 08 00:02:38.180 READ NATIVE MAX ADDRESS EXT
- ec 00 00 00 00 00 00 00 00 00 00 a0 08 00:02:38.170 IDENTIFY DEVICE
- ef 00 03 00 46 00 00 00 00 00 00 a0 08 00:02:38.170 SET FEATURES [Set transfer mode]
- 27 00 00 00 00 00 00 00 00 00 00 e0 08 00:02:38.170 READ NATIVE MAX ADDRESS EXT
- Error 88 [7] occurred at disk power-on lifetime: 14250 hours (593 days + 18 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER -- ST COUNT LBA_48 LH LM LL DV DC
- -- -- -- == -- == == == -- -- -- -- --
- 40 -- 51 00 00 00 00 01 0b 98 a6 e1 00 Error: UNC at LBA = 0x010b98a6 = 17537190
- Commands leading to the command that caused the error were:
- CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
- -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
- c8 00 00 00 08 00 00 00 0b 98 a3 e1 08 00:02:37.180 READ DMA
- 27 00 00 00 00 00 00 00 00 00 00 e0 08 00:02:37.170 READ NATIVE MAX ADDRESS EXT
- ec 00 00 00 00 00 00 00 00 00 00 a0 08 00:02:37.160 IDENTIFY DEVICE
- ef 00 03 00 46 00 00 00 00 00 00 a0 08 00:02:37.160 SET FEATURES [Set transfer mode]
- 27 00 00 00 00 00 00 00 00 00 00 e0 08 00:02:37.160 READ NATIVE MAX ADDRESS EXT
- Error 87 [6] occurred at disk power-on lifetime: 14250 hours (593 days + 18 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER -- ST COUNT LBA_48 LH LM LL DV DC
- -- -- -- == -- == == == -- -- -- -- --
- 40 -- 51 00 00 00 00 01 0b 98 a6 e1 00 Error: UNC at LBA = 0x010b98a6 = 17537190
- Commands leading to the command that caused the error were:
- CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
- -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
- c8 00 00 00 08 00 00 00 0b 98 a3 e1 08 00:02:36.190 READ DMA
- 27 00 00 00 00 00 00 00 00 00 00 e0 08 00:02:36.170 READ NATIVE MAX ADDRESS EXT
- ec 00 00 00 00 00 00 00 00 00 00 a0 08 00:02:36.170 IDENTIFY DEVICE
- ef 00 03 00 46 00 00 00 00 00 00 a0 08 00:02:36.170 SET FEATURES [Set transfer mode]
- 27 00 00 00 00 00 00 00 00 00 00 e0 08 00:02:36.160 READ NATIVE MAX ADDRESS EXT
- SMART Extended Self-test Log Version: 0 (2 sectors)
- Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
- # 1 Reserved (0x80) Completed: read failure 90% 19856 52300520
- # 2 Reserved (0x80) Completed: read failure 90% 19532 52300520
- # 3 Reserved (0x80) Completed: read failure 90% 19472 52300520
- # 4 Reserved (0x80) Completed: read failure 90% 19412 52300520
- # 5 Reserved (0x80) Completed: read failure 90% 19352 52300520
- # 6 Reserved (0x80) Completed: read failure 90% 19292 52300520
- # 7 Reserved (0x80) Completed: read failure 90% 19232 52300520
- # 8 Reserved (0x80) Completed: read failure 90% 19172 52300520
- # 9 Reserved (0x80) Completed: read failure 90% 19112 52300520
- #10 Reserved (0x80) Completed: read failure 90% 19052 52300520
- #11 Reserved (0x80) Completed: read failure 90% 18992 52300520
- #12 Reserved (0x80) Completed: read failure 90% 18932 52300520
- #13 Reserved (0x80) Completed: read failure 90% 18872 52300520
- #14 Reserved (0x80) Completed: read failure 90% 18812 52300520
- #15 Reserved (0x80) Completed: read failure 90% 18752 52300520
- #16 Reserved (0x80) Completed: read failure 90% 18692 52300520
- #17 Reserved (0x80) Completed: read failure 90% 18632 52300520
- #18 Reserved (0x80) Completed: read failure 90% 18572 52300520
- #19 Reserved (0x80) Completed: read failure 90% 18512 52300520
- #20 Reserved (0x80) Completed: read failure 90% 18452 52300520
- #21 Reserved (0x80) Completed: read failure 90% 18392 52300520
- SMART Selective self-test log data structure revision number 0
- Note: revision number not 1 implies that no selective self-test has ever been run
- SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
- 1 0 0 Not_testing
- 2 0 0 Not_testing
- 3 0 0 Not_testing
- 4 0 0 Not_testing
- 5 0 0 Not_testing
- Selective self-test flags (0x0):
- After scanning selected spans, do NOT read-scan remainder of disk.
- If Selective self-test is pending on power-up, resume after 0 minute delay.
- SCT Status Version: 2
- SCT Version (vendor specific): 256 (0x0100)
- SCT Support Level: 1
- Device State: Active (0)
- Current Temperature: 35 Celsius
- Power Cycle Max Temperature: 35 Celsius
- Lifetime Max Temperature: 62 Celsius
- SCT Temperature History Version: 2
- Temperature Sampling Period: 1 minute
- Temperature Logging Interval: 1 minute
- Min/Max recommended Temperature: -4/72 Celsius
- Min/Max Temperature Limit: -9/77 Celsius
- Temperature History Size (Index): 128 (2)
- Index Estimated Time Temperature Celsius
- 3 2014-08-14 06:59 35 ****************
- 4 2014-08-14 07:00 36 *****************
- 5 2014-08-14 07:01 36 *****************
- 6 2014-08-14 07:02 36 *****************
- 7 2014-08-14 07:03 37 ******************
- 8 2014-08-14 07:04 37 ******************
- 9 2014-08-14 07:05 37 ******************
- 10 2014-08-14 07:06 38 *******************
- ... ..( 2 skipped). .. *******************
- 13 2014-08-14 07:09 38 *******************
- 14 2014-08-14 07:10 39 ********************
- ... ..( 10 skipped). .. ********************
- 25 2014-08-14 07:21 39 ********************
- 26 2014-08-14 07:22 38 *******************
- ... ..( 7 skipped). .. *******************
- 34 2014-08-14 07:30 38 *******************
- 35 2014-08-14 07:31 39 ********************
- ... ..( 10 skipped). .. ********************
- 46 2014-08-14 07:42 39 ********************
- 47 2014-08-14 07:43 38 *******************
- 48 2014-08-14 07:44 39 ********************
- 49 2014-08-14 07:45 38 *******************
- ... ..( 4 skipped). .. *******************
- 54 2014-08-14 07:50 38 *******************
- 55 2014-08-14 07:51 39 ********************
- ... ..( 15 skipped). .. ********************
- 71 2014-08-14 08:07 39 ********************
- 72 2014-08-14 08:08 38 *******************
- ... ..( 6 skipped). .. *******************
- 79 2014-08-14 08:15 38 *******************
- 80 2014-08-14 08:16 39 ********************
- ... ..( 9 skipped). .. ********************
- 90 2014-08-14 08:26 39 ********************
- 91 2014-08-14 08:27 ? -
- 92 2014-08-14 08:28 15 -
- 93 2014-08-14 08:29 16 -
- 94 2014-08-14 08:30 17 -
- 95 2014-08-14 08:31 18 -
- 96 2014-08-14 08:32 18 -
- 97 2014-08-14 08:33 19 -
- 98 2014-08-14 08:34 20 *
- 99 2014-08-14 08:35 21 **
- 100 2014-08-14 08:36 21 **
- 101 2014-08-14 08:37 22 ***
- 102 2014-08-14 08:38 22 ***
- 103 2014-08-14 08:39 23 ****
- 104 2014-08-14 08:40 24 *****
- 105 2014-08-14 08:41 24 *****
- 106 2014-08-14 08:42 25 ******
- 107 2014-08-14 08:43 25 ******
- 108 2014-08-14 08:44 26 *******
- 109 2014-08-14 08:45 26 *******
- 110 2014-08-14 08:46 27 ********
- 111 2014-08-14 08:47 28 *********
- 112 2014-08-14 08:48 28 *********
- 113 2014-08-14 08:49 29 **********
- 114 2014-08-14 08:50 29 **********
- 115 2014-08-14 08:51 30 ***********
- 116 2014-08-14 08:52 30 ***********
- 117 2014-08-14 08:53 31 ************
- 118 2014-08-14 08:54 31 ************
- 119 2014-08-14 08:55 32 *************
- 120 2014-08-14 08:56 32 *************
- 121 2014-08-14 08:57 32 *************
- 122 2014-08-14 08:58 33 **************
- 123 2014-08-14 08:59 33 **************
- 124 2014-08-14 09:00 34 ***************
- 125 2014-08-14 09:01 34 ***************
- 126 2014-08-14 09:02 34 ***************
- 127 2014-08-14 09:03 35 ****************
- ... ..( 2 skipped). .. ****************
- 2 2014-08-14 09:06 35 ****************
- SCT Error Recovery Control:
- Read: Disabled
- Write: Disabled
- Device Statistics (GP Log 0x04) not supported
- SATA Phy Event Counters (GP Log 0x11)
- ID Size Value Description
- 0x000a 2 2 Device-to-host register FISes sent due to a COMRESET
- 0x0001 2 0 Command failed due to ICRC error
- 0x0002 2 0 R_ERR response for data FIS
- 0x0003 2 0 R_ERR response for device-to-host data FIS
- 0x0004 2 0 R_ERR response for host-to-device data FIS
- 0x0005 2 0 R_ERR response for non-data FIS
- 0x0006 2 0 R_ERR response for device-to-host non-data FIS
- 0x0007 2 0 R_ERR response for host-to-device non-data FIS
- 0x0008 2 0 Device-to-host non-data FIS retries
- 0x0009 2 1 Transition from drive PhyRdy to drive PhyNRdy
- 0x000b 2 0 CRC errors within host-to-device FIS
- 0x000d 2 0 Non-CRC errors within host-to-device FIS
- 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
- 0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC
- 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
- 0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement