API tools faq
paste
Advertisement
armoon

xu4 suspend resume

armoon
Jun 23rd, 2019
245
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 9.30 KB | None | 0 0
raw download clone embed print report
  1. [root@archl-xu4e ~]# rtcwake -d /dev/rtc0 -m mem -s 10
  2. rtcwake: assuming RTC uses UTC ...
  3. rtcwake: wakeup from "mem" using /dev/rtc0 at Sun Jun 23 14:29:56 2019
  4. [ 72.707852] PM: suspend entry (deep)
  5. [ 72.712727] Filesystems sync: 0.002 seconds
  6. [ 72.722108] Freezing user space processes ... (elapsed 0.002 seconds) done.
  7. [ 72.730550] OOM killer disabled.
  8. [ 72.733462] Freezing remaining freezable tasks ... (elapsed 0.002 seconds) done.
  9. [ 72.815847] sd 0:0:0:0: [sda] Synchronizing SCSI cache
  10. [ 72.971552] wake enabled for irq 151
  11. [ 73.007942] wake enabled for irq 155
  12. [ 73.128081] samsung-pinctrl 13400000.pinctrl: Setting external wakeup interrupt mask: 0xffffffe7
  13. [ 73.146535] Disabling non-boot CPUs ...
  14. [ 73.225374] s3c2410-wdt 101d0000.watchdog: watchdog disabled
  15. [ 73.229930] usb usb1: root hub lost power or was reset
  16. [ 73.299725] usb usb2: root hub lost power or was reset
  17. [ 73.304474] wake disabled for irq 155
  18. [ 73.314064] wake disabled for irq 151
  19. [ 73.331117] exynos-tmu 10060000.tmu: More trip points than supported by this TMU.
  20. [ 73.337297] exynos-tmu 10060000.tmu: 2 trip points should be configured in polling mode.
  21. [ 73.345343] exynos-tmu 10064000.tmu: More trip points than supported by this TMU.
  22. [ 73.352807] exynos-tmu 10064000.tmu: 2 trip points should be configured in polling mode.
  23. [ 73.360916] exynos-tmu 10068000.tmu: More trip points than supported by this TMU.
  24. [ 73.368295] exynos-tmu 10068000.tmu: 2 trip points should be configured in polling mode.
  25. [ 73.376429] exynos-tmu 1006c000.tmu: More trip points than supported by this TMU.
  26. [ 73.383742] exynos-tmu 1006c000.tmu: 2 trip points should be configured in polling mode.
  27. [ 73.394345] usb usb3: root hub lost power or was reset
  28. [ 73.394704] s3c-rtc 101e0000.rtc: rtc disabled, re-enabling
  29. [ 73.394840] usb usb5: root hub lost power or was reset
  30. [ 73.394864] usb usb6: root hub lost power or was reset
  31. [ 73.398063] usb usb4: root hub lost power or was reset
  32. [ 73.806876] usb 4-1: reset SuperSpeed Gen 1 USB device number 2 using xhci-hcd
  33. [ 73.986504] usb 3-1: reset high-speed USB device number 2 using xhci-hcd
  34. [ 74.026814] usb 5-1: reset high-speed USB device number 2 using xhci-hcd
  35. [ 74.266364] usb 4-1.1: reset SuperSpeed Gen 1 USB device number 3 using xhci-hcd
  36. [ 74.988689] OOM killer enabled.
  37. [ 74.990372] Restarting tasks ... done.
  38. [ 74.997529] PM: suspend exit
  39. [ 75.014009] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63)
  40. [root@archl-xu4e ~]# [ 75.243019] mmc_host mmc0: Bus speed (slot 0) = 200000000Hz (slot req 200000000Hz, actual 200000000HZ div = 0)
  41. [ 75.255929] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 52000000Hz, actual 50000000HZ div = 0)
  42. [ 75.290096] mmc_host mmc0: Bus speed (slot 0) = 400000000Hz (slot req 200000000Hz, actual 200000000HZ div = 1)
  43.  
  44. [root@archl-xu4e ~]# rtcwake -d /dev/rtc0 -m mem -s 10
  45. rtcwake: assuming RTC uses UTC ...
  46. rtcwake: wakeup from "mem" using /dev/rtc0 at Sun Jun 23 14:30:20 2019
  47. [ 86.308500] PM: suspend entry (deep)
  48. [ 86.311962] Filesystems sync: 0.001 seconds
  49. [ 86.320781] Freezing user space processes ... (elapsed 0.002 seconds) done.
  50. [ 86.328542] OOM killer disabled.
  51. [ 86.331644] Freezing remaining freezable tasks ... (elapsed 0.002 seconds) done.
  52. [ 86.435700] sd 0:0:0:0: [sda] Synchronizing SCSI cache
  53. [ 86.591293] wake enabled for irq 151
  54. [ 86.626989] wake enabled for irq 155
  55. [ 86.747140] samsung-pinctrl 13400000.pinctrl: Setting external wakeup interrupt mask: 0xffffffe7
  56. [ 86.765605] Disabling non-boot CPUs ...
  57. [ 86.841073] s3c2410-wdt 101d0000.watchdog: watchdog disabled
  58. [ 86.845648] usb usb1: root hub lost power or was reset
  59. [ 86.919564] usb usb2: root hub lost power or was reset
  60. [ 86.924314] wake disabled for irq 155
  61. [ 86.933852] wake disabled for irq 151
  62. [ 86.950827] exynos-tmu 10060000.tmu: More trip points than supported by this TMU.
  63. [ 86.957003] exynos-tmu 10060000.tmu: 2 trip points should be configured in polling mode.
  64. [ 86.965055] exynos-tmu 10064000.tmu: More trip points than supported by this TMU.
  65. [ 86.972496] exynos-tmu 10064000.tmu: 2 trip points should be configured in polling mode.
  66. [ 86.980632] exynos-tmu 10068000.tmu: More trip points than supported by this TMU.
  67. [ 86.988014] exynos-tmu 10068000.tmu: 2 trip points should be configured in polling mode.
  68. [ 86.996148] exynos-tmu 1006c000.tmu: More trip points than supported by this TMU.
  69. [ 87.003452] exynos-tmu 1006c000.tmu: 2 trip points should be configured in polling mode.
  70. [ 87.013926] usb usb3: root hub lost power or was reset
  71. [ 87.014295] s3c-rtc 101e0000.rtc: rtc disabled, re-enabling
  72. [ 87.014473] usb usb5: root hub lost power or was reset
  73. [ 87.014498] usb usb6: root hub lost power or was reset
  74. [ 87.017644] usb usb4: root hub lost power or was reset
  75. [ 87.427075] usb 4-1: reset SuperSpeed Gen 1 USB device number 2 using xhci-hcd
  76. [ 87.606386] usb 3-1: reset high-speed USB device number 2 using xhci-hcd
  77. [ 87.646461] usb 5-1: reset high-speed USB device number 2 using xhci-hcd
  78. [ 87.886242] usb 4-1.1: reset SuperSpeed Gen 1 USB device number 3 using xhci-hcd
  79. [ 88.607881] OOM killer enabled.
  80. [ 88.609562] Restarting tasks ... done.
  81. [ 88.614340] PM: suspend exit
  82. [ 88.632953] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63)
  83. [root@archl-xu4e ~]# [ 88.896900] mmc_host mmc0: Bus speed (slot 0) = 200000000Hz (slot req 200000000Hz, actual 200000000HZ div = 0)
  84. [ 88.912970] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 52000000Hz, actual 50000000HZ div = 0)
  85. [ 88.929810] mmc_host mmc0: Bus speed (slot 0) = 400000000Hz (slot req 200000000Hz, actual 200000000HZ div = 1)
  86.  
  87. [root@archl-xu4e ~]# rtcwake -d /dev/rtc0 -m mem -s 10
  88. rtcwake: assuming RTC uses UTC ...
  89. rtcwake: wakeup from "mem" using /dev/rtc0 at Sun Jun 23 14:30:41 2019
  90. [ 97.024433] PM: suspend entry (deep)
  91. [ 97.030395] Filesystems sync: 0.003 seconds
  92. [ 97.036715] Freezing user space processes ... (elapsed 0.002 seconds) done.
  93. [ 97.044507] OOM killer disabled.
  94. [ 97.047753] Freezing remaining freezable tasks ... (elapsed 0.002 seconds) done.
  95. [ 97.105552] sd 0:0:0:0: [sda] Synchronizing SCSI cache
  96. [ 97.261608] wake enabled for irq 151
  97. [ 97.299424] wake enabled for irq 155
  98. [ 97.415885] samsung-pinctrl 13400000.pinctrl: Setting external wakeup interrupt mask: 0xffffffe7
  99. [ 97.433150] Disabling non-boot CPUs ...
  100. [ 97.526880] s3c2410-wdt 101d0000.watchdog: watchdog disabled
  101. [ 97.531343] usb usb1: root hub lost power or was reset
  102. [ 97.609426] usb usb2: root hub lost power or was reset
  103. [ 97.614169] wake disabled for irq 155
  104. [ 97.623676] wake disabled for irq 151
  105. [ 97.640212] exynos-tmu 10060000.tmu: More trip points than supported by this TMU.
  106. [ 97.646403] exynos-tmu 10060000.tmu: 2 trip points should be configured in polling mode.
  107. [ 97.654436] exynos-tmu 10064000.tmu: More trip points than supported by this TMU.
  108. [ 97.661883] exynos-tmu 10064000.tmu: 2 trip points should be configured in polling mode.
  109. [ 97.670005] exynos-tmu 10068000.tmu: More trip points than supported by this TMU.
  110. [ 97.677395] exynos-tmu 10068000.tmu: 2 trip points should be configured in polling mode.
  111. [ 97.685522] exynos-tmu 1006c000.tmu: More trip points than supported by this TMU.
  112. [ 97.692834] exynos-tmu 1006c000.tmu: 2 trip points should be configured in polling mode.
  113. [ 97.703438] usb usb3: root hub lost power or was reset
  114. [ 97.703790] s3c-rtc 101e0000.rtc: rtc disabled, re-enabling
  115. [ 97.707156] usb usb4: root hub lost power or was reset
  116. [ 97.719084] usb usb5: root hub lost power or was reset
  117. [ 97.722931] usb usb6: root hub lost power or was reset
  118. [ 98.116558] usb 4-1: reset SuperSpeed Gen 1 USB device number 2 using xhci-hcd
  119. [ 98.296240] usb 3-1: reset high-speed USB device number 2 using xhci-hcd
  120. [ 98.336318] usb 5-1: reset high-speed USB device number 2 using xhci-hcd
  121. [ 98.576097] usb 4-1.1: reset SuperSpeed Gen 1 USB device number 3 using xhci-hcd
  122. [ 99.300281] OOM killer enabled.
  123. [ 99.301995] Restarting tasks ... done.
  124. [ 99.309311] PM: suspend exit
  125. [root@archl-xu4e ~]# [ 99.326729] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63)
  126. [ 99.563622] mmc_host mmc0: Bus speed (slot 0) = 200000000Hz (slot req 200000000Hz, actual 200000000HZ div = 0)
  127. [ 99.577778] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 52000000Hz, actual 50000000HZ div = 0)
  128. [ 99.587818] mmc_host mmc0: Bus speed (slot 0) = 400000000Hz (slot req 200000000Hz, actual 200000000HZ div = 1)
  129.  
  130. [root@archl-xu4e ~]# lsusb -t
  131. /: Bus 06.Port 1: Dev 1, Class=root_hub, Driver=xhci-hcd/1p, 5000M
  132. /: Bus 05.Port 1: Dev 1, Class=root_hub, Driver=xhci-hcd/1p, 480M
  133. |__ Port 1: Dev 2, If 0, Class=Vendor Specific Class, Driver=r8152, 480M
  134. /: Bus 04.Port 1: Dev 1, Class=root_hub, Driver=xhci-hcd/1p, 5000M
  135. |__ Port 1: Dev 2, If 0, Class=Hub, Driver=hub/2p, 5000M
  136. |__ Port 1: Dev 3, If 0, Class=Mass Storage, Driver=uas, 5000M
  137. /: Bus 03.Port 1: Dev 1, Class=root_hub, Driver=xhci-hcd/1p, 480M
  138. |__ Port 1: Dev 2, If 0, Class=Hub, Driver=hub/2p, 480M
  139. /: Bus 02.Port 1: Dev 1, Class=root_hub, Driver=exynos-ohci/3p, 12M
  140. /: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=exynos-ehci/3p, 480M
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!