API tools faq
paste
Advertisement
Guest User

BPI-M2U-Gentoo-dmesg

a guest
Feb 19th, 2017
507
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 38.60 KB | None | 0 0
raw download clone embed print report
  1. [ 0.000000] Booting Linux on physical CPU 0x0
  2. [ 0.000000] Initializing cgroup subsys cpuset
  3. [ 0.000000] Initializing cgroup subsys cpu
  4. [ 0.000000] Initializing cgroup subsys cpuacct
  5. [ 0.000000] Linux version 3.10.65-BPI-M2U-Kernel (deim@Phoros) (gcc version 4.9.4 (Gentoo 4.9.4 p1.0, pie-0.6.4) ) #2 SMP Sat Feb 18 18:44:57 CET 2017
  6. [ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c53c7d
  7. [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
  8. [ 0.000000] Machine: sun8iw11p1, model: sun8iw11p1
  9. [ 0.000000] cma: CMA: reserved 256 MiB at 5f800000
  10. [ 0.000000] Memory policy: ECC disabled, Data cache writealloc
  11. [ 0.000000] On node 0 totalpages: 524288
  12. [ 0.000000] free_area_init_node: node 0, pgdat c0d03a00, node_mem_map c0d71000
  13. [ 0.000000] Normal zone: 1520 pages used for memmap
  14. [ 0.000000] Normal zone: 0 pages reserved
  15. [ 0.000000] Normal zone: 194560 pages, LIFO batch:31
  16. [ 0.000000] HighMem zone: 2576 pages used for memmap
  17. [ 0.000000] HighMem zone: 329728 pages, LIFO batch:31
  18. [ 0.000000] PERCPU: Embedded 8 pages/cpu @c1d9b000 s9792 r8192 d14784 u32768
  19. [ 0.000000] pcpu-alloc: s9792 r8192 d14784 u32768 alloc=8*4096
  20. [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
  21. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 522768
  22. [ 0.000000] Kernel command line: enforcing=1 initcall_debug=0 console=ttyS0,115200n8 console=tty1 no_console_suspend board=bpi-m2u loglevel=4 root=/dev/mmcblk0p2 rw rootwait init=/init cma=256M panic=10 consoleblank=0 bootmenutimeout=10 datadev=mmcblk0p2 disp.screen0_output_type=3 disp.screen0_output_mode=10 disp.screen1_output_type=3 disp.screen1_output_mode=10 androidboot.serialno=14105190410c2428078c
  23. [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
  24. [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
  25. [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
  26. [ 0.000000] allocated 4194304 bytes of page_cgroup
  27. [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
  28. [ 0.000000] Memory: 2048MB = 2048MB total
  29. [ 0.000000] Memory: 1799072k/1799072k available, 298080k reserved, 1318912K highmem
  30. [ 0.000000] Virtual kernel memory layout:
  31. vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  32. fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
  33. vmalloc : 0xf0000000 - 0xff000000 ( 240 MB)
  34. lowmem : 0xc0000000 - 0xef800000 ( 760 MB)
  35. pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
  36. modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
  37. .text : 0xc0008000 - 0xc0b9cf20 (11860 kB)
  38. .init : 0xc0b9d000 - 0xc0be6640 ( 294 kB)
  39. .data : 0xc0be8000 - 0xc0d04f98 (1140 kB)
  40. .bss : 0xc0d04f98 - 0xc0d70444 ( 430 kB)
  41. [ 0.000000] Hierarchical RCU implementation.
  42. [ 0.000000] NR_IRQS:16 nr_irqs:16 16
  43. [ 0.000000] of_sunxi_clocks_init : sunxi_clk_base[0xf1c20000]
  44. [ 0.000000] pll_audio-set_default_rate=24576000 success!
  45. [ 0.000000] pll_periph0-set_default_rate=600000000 success!
  46. [ 0.000000] pll_de-set_default_rate=297000000 success!
  47. [ 0.000000] ahb1-set_default_rate=200000000 success!
  48. [ 0.000000] apb1-set_default_rate=100000000 success!
  49. [ 0.000000] apb2-set_default_rate=24000000 success!
  50. [ 0.000000] de-set_default_rate=297000000 success!
  51. [ 0.000000] de_mp-set_default_rate=297000000 success!
  52. [ 0.000000] mbus-set_default_rate=400000000 success!
  53. [ 0.000000] Architected cp15 timer(s) running at 24.00MHz (phys).
  54. [ 0.000000] Switching to timer-based delay loop
  55. [ 0.000000] sched_clock: ARM arch timer >56 bits at 24000kHz, resolution 41ns
  56. [ 0.000000] sched_clock: 32 bits at 100 Hz, resolution 10000000ns, wraps every 4294967286ms
  57. [ 0.000000] Console: colour dummy device 80x30
  58. [ 0.000000] console [tty1] enabled
  59. [ 0.010000] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000)
  60. [ 0.010000] pid_max: default: 32768 minimum: 301
  61. [ 0.010000] Security Framework initialized
  62. [ 0.010000] AppArmor: AppArmor initialized
  63. [ 0.010000] Mount-cache hash table entries: 512
  64. [ 0.017786] Initializing cgroup subsys memory
  65. [ 0.017840] Initializing cgroup subsys devices
  66. [ 0.017852] Initializing cgroup subsys freezer
  67. [ 0.017861] Initializing cgroup subsys blkio
  68. [ 0.017868] Initializing cgroup subsys perf_event
  69. [ 0.017924] CPU: Testing write buffer coherency: ok
  70. [ 0.018380] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
  71. [ 0.018413] Setting up static identity map for 0xc08409c8 - 0xc0840a20
  72. [ 0.020046] CPU1: Booted secondary processor
  73. [ 0.020046] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
  74. [ 0.020186] CPU2: Booted secondary processor
  75. [ 0.020186] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
  76. [ 0.020297] CPU3: Booted secondary processor
  77. [ 0.020297] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
  78. [ 0.020297] Brought up 4 CPUs
  79. [ 0.020297] SMP: Total of 4 processors activated (192.00 BogoMIPS).
  80. [ 0.020558] devtmpfs: initialized
  81. [ 0.024609] xor: measuring software checksum speed
  82. [ 0.120010] arm4regs : 1280.000 MB/sec
  83. [ 0.220009] 8regs : 757.200 MB/sec
  84. [ 0.320009] 32regs : 860.000 MB/sec
  85. [ 0.320017] xor: using function: arm4regs (1280.000 MB/sec)
  86. [ 0.320038] atomic64 test passed
  87. [ 0.320044] pinctrl core: initialized pinctrl subsystem
  88. [ 0.333221] NET: Registered protocol family 16
  89. [ 0.333221] DMA: preallocated 256 KiB pool for atomic coherent allocations
  90. [ 0.333221] dump_class_init,844, success
  91. [ 0.340852] sun8iw11p1-pinctrl pio: initialized sunXi PIO driver
  92. [ 0.350293] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
  93. [ 0.350293] hw-breakpoint: maximum watchpoint size is 8 bytes.
  94. [ 0.390188] bio: create slab <bio-0> at 0
  95. [ 0.568942] raid6: int32x1 147 MB/s
  96. [ 0.739254] raid6: int32x2 160 MB/s
  97. [ 0.908984] raid6: int32x4 142 MB/s
  98. [ 1.079143] raid6: int32x8 127 MB/s
  99. [ 1.079151] raid6: using algorithm int32x2 (160 MB/s)
  100. [ 1.079157] raid6: using intx1 recovery algorithm
  101. [ 1.080089] pwm module init!
  102. [ 1.080368] platform pwm0: there is no bind_pwm, set bind_pwm 255!
  103. [ 1.080368] platform pwm0: there is no dead time, set bind_pwm 255!
  104. [ 1.081357] SCSI subsystem initialized
  105. [ 1.081357] libata version 3.00 loaded.
  106. [ 1.081357] usbcore: registered new interface driver usbfs
  107. [ 1.081357] usbcore: registered new interface driver hub
  108. [ 1.081357] usbcore: registered new device driver usb
  109. [ 1.090332] Linux video capture interface: v2.00
  110. [ 1.090332] [axp221s] chip id detect 0x6 !
  111. [ 1.090332] [axp221s] enable dcdc2 dvm.
  112. [ 1.110296] Advanced Linux Sound Architecture Driver Initialized.
  113. [ 1.110308] Bluetooth: Core ver 2.16
  114. [ 1.110308] NET: Registered protocol family 31
  115. [ 1.110308] Bluetooth: HCI device and connection manager initialized
  116. [ 1.110308] Bluetooth: HCI socket layer initialized
  117. [ 1.110308] Bluetooth: L2CAP socket layer initialized
  118. [ 1.110308] Bluetooth: SCO socket layer initialized
  119. [ 1.110308] cfg80211: Calling CRDA to update world regulatory domain
  120. [ 1.110779] NetLabel: Initializing
  121. [ 1.110787] NetLabel: domain hash size = 128
  122. [ 1.110792] NetLabel: protocols = UNLABELED CIPSOv4
  123. [ 1.110859] NetLabel: unlabeled traffic allowed by default
  124. [ 1.110905] [pm]aw_pm_init!
  125. [ 1.110905] np name = /soc@01c00000/rtc@01c20400.
  126. [ 1.110905] base = f1c20500, len = 4.
  127. [ 1.110905] pmu1 does not exist.
  128. [ 1.120550] add_sys_pwr_dm: get ldo name for id: vdd-cpus failed
  129. [ 1.120550] add_sys_pwr_dm: get ldo name for id: vcc-lpddr failed
  130. [ 1.120550] add_sys_pwr_dm: get ldo name for id: vcc-pl failed
  131. [ 1.120550] add_sys_pwr_dm: axp22_dcdc1 ldo already alwayson.
  132. [ 1.120550] after inited: sys_mask config = 0x84815.
  133. [ 1.120550] Warning: can not find np for dynamic_standby_para.
  134. [ 1.120696] [pm]valid
  135. [ 1.120703] [pm]valid
  136. [ 1.120796] sunxi budget cooling probe start !
  137. [ 1.120796] CPU freq cooling register Success
  138. [ 1.120796] CPU hotplug cooling register Success
  139. [ 1.120796] CPU budget cooling register Success
  140. [ 1.120796] input: sunxi-ths as /devices/virtual/input/input0
  141. [ 1.120796] thermal thermal_zone0: failed to read out thermal zone 0
  142. [ 1.120796] Switching to clocksource arch_sys_counter
  143. [ 1.120990] FS-Cache: Loaded
  144. [ 1.121051] CacheFiles: Loaded
  145. [ 1.121051] AppArmor: AppArmor Filesystem Enabled
  146. [ 1.141128] NET: Registered protocol family 2
  147. [ 1.142040] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
  148. [ 1.142162] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
  149. [ 1.142275] TCP: Hash tables configured (established 8192 bind 8192)
  150. [ 1.142350] TCP: reno registered
  151. [ 1.142363] UDP hash table entries: 512 (order: 2, 16384 bytes)
  152. [ 1.142419] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
  153. [ 1.142765] NET: Registered protocol family 1
  154. [ 1.143164] RPC: Registered named UNIX socket transport module.
  155. [ 1.143176] RPC: Registered udp transport module.
  156. [ 1.143181] RPC: Registered tcp transport module.
  157. [ 1.143187] RPC: Registered tcp NFSv4.1 backchannel transport module.
  158. [ 1.164928] lock super standby defaultly!
  159. [ 1.164949] lookup_scene_lock_name: new scene lock super_standby
  160. [ 1.164956] scene_lock_init name=super_standby
  161. [ 1.164963] scene_lock: super_standby, type 5, count 1
  162. [ 1.165836] audit: initializing netlink socket (disabled)
  163. [ 1.165877] type=2000 audit(1.160:1): initialized
  164. [ 1.166981] bounce pool size: 64 pages
  165. [ 1.167294] VFS: Disk quotas dquot_6.5.2
  166. [ 1.167431] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  167. [ 1.168317] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  168. [ 1.169171] NFS: Registering the id_resolver key type
  169. [ 1.169249] Key type id_resolver registered
  170. [ 1.169256] Key type id_legacy registered
  171. [ 1.169273] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
  172. [ 1.169872] Key type cifs.spnego registered
  173. [ 1.169901] Key type cifs.idmap registered
  174. [ 1.169913] NTFS driver 2.1.30 [Flags: R/W].
  175. [ 1.170500] fuse init (API version 7.22)
  176. [ 1.171145] Registering sdcardfs 3.1.0
  177. [ 1.171523] bio: create slab <bio-1> at 1
  178. [ 1.172136] Btrfs loaded
  179. [ 1.172286] ceph: loaded (mds proto 32)
  180. [ 1.172584] aufs 3.10-20141215
  181. [ 1.172607] msgmni has been set to 1449
  182. [ 1.174274] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
  183. [ 1.174394] io scheduler noop registered
  184. [ 1.174403] io scheduler deadline registered
  185. [ 1.174484] io scheduler cfq registered (default)
  186. [ 1.175322] OF: no ranges; cannot translate
  187. [ 1.175351] OF: no ranges; cannot translate
  188. [ 1.175625] OF: no ranges; cannot translate
  189. [ 1.175642] OF: no ranges; cannot translate
  190. [ 1.176453] [DISP]disp_module_init
  191. [ 1.177195] [DISP]parser_disp_init_para: screen0_output_type(3)
  192. [ 1.177212] [DISP]parser_disp_init_para: screen0_output_mode(10) value(10)
  193. [ 1.177218] [DISP]parser_disp_init_para: screen1_output_type(3)
  194. [ 1.177226] [DISP]parser_disp_init_para: screen1_output_mode(10) value(10)
  195. [ 1.177242] [DISP] boot_disp:0x40a
  196. [ 1.206349] [DISP] disp_sys_script_get_item,line:193:of_find_compatible_node allwinner,sunxi-lcd1 fail
  197. [ 1.206862] [DISP] disp_sys_script_get_item,line:193:of_find_compatible_node allwinner,sunxi-lcd1 fail
  198. [ 1.207240] [DISP] disp_sys_script_get_item,line:193:of_find_compatible_node allwinner,sunxi-lcd1 fail
  199. [ 1.207617] [DISP] disp_sys_script_get_item,line:193:of_find_compatible_node allwinner,sunxi-lcd1 fail
  200. [ 1.207994] [DISP] disp_sys_script_get_item,line:193:of_find_compatible_node allwinner,sunxi-lcd1 fail
  201. [ 1.208371] [DISP] disp_sys_script_get_item,line:193:of_find_compatible_node allwinner,sunxi-lcd1 fail
  202. [ 1.208747] [DISP] disp_sys_script_get_item,line:193:of_find_compatible_node allwinner,sunxi-lcd1 fail
  203. [ 1.209124] [DISP] disp_sys_script_get_item,line:193:of_find_compatible_node allwinner,sunxi-lcd1 fail
  204. [ 1.209500] [DISP] disp_sys_script_get_item,line:193:of_find_compatible_node allwinner,sunxi-lcd1 fail
  205. [ 1.210069] [DISP] disp_sys_script_get_item,line:193:of_find_compatible_node allwinner,sunxi-lcd1 fail
  206. [ 1.210081] [DISP] fb_base:0x46400000
  207. [ 1.311501] Console: switching to colour frame buffer device 240x67
  208. [ 1.343315] [DISP]disp_module_init finish
  209. [ 1.351106] uart0: ttyS0 at MMIO 0x1c28000 (irq = 33) is a SUNXI
  210. [ 1.351120] sw_uart_pm()959 - uart0 clk is already enable
  211. [ 1.351136] sw_console_setup()1270 - console setup baud 115200 parity n bits 8, flow n
  212. [ 1.417073] console [ttyS0] enabled
  213. [ 1.417889] uart3: ttyS3 at MMIO 0x1c28c00 (irq = 36) is a SUNXI
  214. [ 1.419020] misc dump reg init
  215. [ 1.419770] [drm] Initialized drm 1.1.0 20060810
  216. [ 1.431118] brd: module loaded
  217. [ 1.436871] loop: module loaded
  218. [ 1.437474] [NAND]Failed to insmod nand!!!
  219. [ 1.437760] sunxi-bt bt: bt_power_name (vcc-wifi-2)
  220. [ 1.437771] sunxi-bt bt: io_regulator_name (vcc-io-wifi)
  221. [ 1.437797] sunxi-bt bt: bt_rst gpio=236 mul-sel=1 pull=1 drv_level=1 data=0
  222. [ 1.437839] sunxi-bt bt: clk_name (outa)
  223. [ 1.438154] sunxi-bt bt: block state already is 1
  224. [ 1.438482] sunxi-wlan wlan: wlan_busnum (1)
  225. [ 1.438494] sunxi-wlan wlan: wlan_power_name (vcc-wifi)
  226. [ 1.438509] sunxi-wlan wlan: io_regulator_name (vcc-io-wifi)
  227. [ 1.438529] sunxi-wlan wlan: request pincrtl handle for device [wlan] failed
  228. [ 1.446595] sunxi-wlan wlan: wlan_regon gpio=202 mul-sel=1 pull=1 drv_level=1 data=0
  229. [ 1.446664] /soc@01c00000/wlan: could not find phandle
  230. [ 1.452508] sunxi-wlan wlan: get gpio wlan_hostwake failed
  231. [ 1.458630] sunxi-wlan wlan: clk_name (outa)
  232. [ 1.458947] Loading iSCSI transport class v2.0-870.
  233. [ 1.460094] iscsi: registered transport (tcp)
  234. [ 1.460991] sunxi-ahci sata: sata_regulator0 "vdd-sata-25"!
  235. [ 1.461060] sunxi-ahci sata: sata_regulator1 "vdd-sata-12"!
  236. [ 1.462092] sunxi-ahci sata: regulator "vdd-sata-25" voltage set: 2500000 to 2500000!
  237. [ 1.463043] sunxi-ahci sata: regulator "vdd-sata-12" voltage set: 1200000 to 1200000!
  238. [ 1.465250] sunxi-ahci sata: frequncy of module clk for AHCI: 100000000
  239. [ 1.465261] sunxi-ahci sata: frequncy of pll clk for AHCI: 100000000
  240. [ 1.530039] sunxi-ahci sata: SATA power enable do not exist!!
  241. [ 1.536468] sunxi-ahci sata: controller can't do PMP, turning off CAP_PMP
  242. [ 1.536478] sunxi-ahci sata: forcing PORTS_IMPL to 0x1
  243. [ 1.536533] sunxi-ahci sata: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl platform mode
  244. [ 1.536548] sunxi-ahci sata: flags: ncq sntf pm led clo only pio slum part ccc
  245. [ 1.536945] dma_alloc_coherent mem = 0xdf840000, size = 0x16500, mem_dma=0x5f840000
  246. [ 1.538097] scsi0 : sunxi-ahci
  247. [ 1.538701] ata1: SATA max UDMA/133 mmio [mem 0x01c18000-0x01c181ff] port 0x100 irq 88
  248. [ 1.541253] WARNING: Get ephy clock is failed
  249. [ 1.542661] PPP generic driver version 2.4.2
  250. [ 1.543085] NET: Registered protocol family 24
  251. [ 1.543142] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  252. [ 1.543331] get ehci0-controller, regulator_io is no nocare
  253. [ 1.543381] [sunxi-ehci0]: probe, pdev->name: 1c14000.ehci0-controller, sunxi_ehci: 0xc0d60a10, 0x:f1c14000, irq_no:47
  254. [ 1.543448] sunxi-ehci 1c14000.ehci0-controller: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
  255. [ 1.543480] sunxi-ehci 1c14000.ehci0-controller: new USB bus registered, assigned bus number 1
  256. [ 1.543881] sunxi-ehci 1c14000.ehci0-controller: irq 71, io mem 0xc0d60294
  257. [ 1.560041] sunxi-ehci 1c14000.ehci0-controller: USB 0.0 started, EHCI 1.00
  258. [ 1.560133] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  259. [ 1.560144] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  260. [ 1.560153] usb usb1: Product: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
  261. [ 1.560162] usb usb1: Manufacturer: Linux 3.10.65-BPI-M2U-Kernel ehci_hcd
  262. [ 1.560170] usb usb1: SerialNumber: sunxi-ehci
  263. [ 1.561034] hub 1-0:1.0: USB hub found
  264. [ 1.561057] hub 1-0:1.0: 1 port detected
  265. [ 1.561369] [ehci0-controller]: sunxi_usb_disable_ehci
  266. [ 1.561380] [sunxi-ehci0]: remove, pdev->name: 1c14000.ehci0-controller, sunxi_ehci: 0xc0d60a10
  267. [ 1.561400] sunxi-ehci 1c14000.ehci0-controller: remove, state 1
  268. [ 1.561417] usb usb1: USB disconnect, device number 1
  269. [ 1.562942] sunxi-ehci 1c14000.ehci0-controller: USB bus 1 deregistered
  270. [ 1.563607] get drv_vbus is fail, 84
  271. [ 1.563616] get ehci1-controller, regulator_io is no nocare
  272. [ 1.563665] [sunxi-ehci1]: probe, pdev->name: 1c19000.ehci1-controller, sunxi_ehci: 0xc0d60bb4, 0x:f1c19000, irq_no:6c
  273. [ 1.563716] sunxi-ehci 1c19000.ehci1-controller: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
  274. [ 1.563745] sunxi-ehci 1c19000.ehci1-controller: new USB bus registered, assigned bus number 1
  275. [ 1.564115] sunxi-ehci 1c19000.ehci1-controller: irq 108, io mem 0xc0d60294
  276. [ 1.580042] sunxi-ehci 1c19000.ehci1-controller: USB 0.0 started, EHCI 1.00
  277. [ 1.580114] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  278. [ 1.580124] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  279. [ 1.580133] usb usb1: Product: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
  280. [ 1.580142] usb usb1: Manufacturer: Linux 3.10.65-BPI-M2U-Kernel ehci_hcd
  281. [ 1.580150] usb usb1: SerialNumber: sunxi-ehci
  282. [ 1.580940] hub 1-0:1.0: USB hub found
  283. [ 1.580961] hub 1-0:1.0: 1 port detected
  284. [ 1.581330] get drv_vbus is fail, 84
  285. [ 1.581337] get ehci2-controller, regulator_io is no nocare
  286. [ 1.581381] [sunxi-ehci2]: probe, pdev->name: 1c1c000.ehci2-controller, sunxi_ehci: 0xc0d60d58, 0x:f1c1c000, irq_no:6e
  287. [ 1.581434] sunxi-ehci 1c1c000.ehci2-controller: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
  288. [ 1.581463] sunxi-ehci 1c1c000.ehci2-controller: new USB bus registered, assigned bus number 2
  289. [ 1.581758] sunxi-ehci 1c1c000.ehci2-controller: irq 110, io mem 0xc0d60294
  290. [ 1.600038] sunxi-ehci 1c1c000.ehci2-controller: USB 0.0 started, EHCI 1.00
  291. [ 1.600130] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
  292. [ 1.600140] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  293. [ 1.600150] usb usb2: Product: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
  294. [ 1.600158] usb usb2: Manufacturer: Linux 3.10.65-BPI-M2U-Kernel ehci_hcd
  295. [ 1.600166] usb usb2: SerialNumber: sunxi-ehci
  296. [ 1.600964] hub 2-0:1.0: USB hub found
  297. [ 1.600985] hub 2-0:1.0: 1 port detected
  298. [ 1.601670] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  299. [ 1.601871] get ohci0-controller, regulator_io is no nocare
  300. [ 1.601948] [sunxi-ohci0]: probe, pdev->name: 1c14000.ohci0-controller, sunxi_ohci: 0xc0d60380
  301. [ 1.602009] sunxi-ohci 1c14000.ohci0-controller: SW USB2.0 'Open' Host Controller (OHCI) Driver
  302. [ 1.602040] sunxi-ohci 1c14000.ohci0-controller: new USB bus registered, assigned bus number 3
  303. [ 1.602075] sunxi-ohci 1c14000.ohci0-controller: irq 72, io mem 0xc0d5be1c
  304. [ 1.664045] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
  305. [ 1.664057] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  306. [ 1.664067] usb usb3: Product: SW USB2.0 'Open' Host Controller (OHCI) Driver
  307. [ 1.664075] usb usb3: Manufacturer: Linux 3.10.65-BPI-M2U-Kernel ohci_hcd
  308. [ 1.664083] usb usb3: SerialNumber: sunxi-ohci
  309. [ 1.664967] hub 3-0:1.0: USB hub found
  310. [ 1.664989] hub 3-0:1.0: 1 port detected
  311. [ 1.665296] [ohci0-controller]: sunxi_usb_disable_ohci
  312. [ 1.665307] [sunxi-ohci0]: remove, pdev->name: 1c14000.ohci0-controller, sunxi_ohci: 0xc0d60380
  313. [ 1.665317] sunxi-ohci 1c14000.ohci0-controller: remove, state 1
  314. [ 1.665336] usb usb3: USB disconnect, device number 1
  315. [ 1.666132] sunxi-ohci 1c14000.ohci0-controller: USB bus 3 deregistered
  316. [ 1.666770] get drv_vbus is fail, 84
  317. [ 1.666778] get ohci1-controller, regulator_io is no nocare
  318. [ 1.666850] [sunxi-ohci1]: probe, pdev->name: 1c19000.ohci1-controller, sunxi_ohci: 0xc0d60524
  319. [ 1.666897] sunxi-ohci 1c19000.ohci1-controller: SW USB2.0 'Open' Host Controller (OHCI) Driver
  320. [ 1.666926] sunxi-ohci 1c19000.ohci1-controller: new USB bus registered, assigned bus number 3
  321. [ 1.666961] sunxi-ohci 1c19000.ohci1-controller: irq 96, io mem 0xc0d5be1c
  322. [ 1.724027] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
  323. [ 1.724039] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  324. [ 1.724048] usb usb3: Product: SW USB2.0 'Open' Host Controller (OHCI) Driver
  325. [ 1.724056] usb usb3: Manufacturer: Linux 3.10.65-BPI-M2U-Kernel ohci_hcd
  326. [ 1.724065] usb usb3: SerialNumber: sunxi-ohci
  327. [ 1.724911] hub 3-0:1.0: USB hub found
  328. [ 1.724931] hub 3-0:1.0: 1 port detected
  329. [ 1.725304] get drv_vbus is fail, 84
  330. [ 1.725312] get ohci2-controller, regulator_io is no nocare
  331. [ 1.725377] [sunxi-ohci2]: probe, pdev->name: 1c1c000.ohci2-controller, sunxi_ohci: 0xc0d606c8
  332. [ 1.725424] sunxi-ohci 1c1c000.ohci2-controller: SW USB2.0 'Open' Host Controller (OHCI) Driver
  333. [ 1.725452] sunxi-ohci 1c1c000.ohci2-controller: new USB bus registered, assigned bus number 4
  334. [ 1.725488] sunxi-ohci 1c1c000.ohci2-controller: irq 97, io mem 0xc0d5be1c
  335. [ 1.784029] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
  336. [ 1.784040] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  337. [ 1.784049] usb usb4: Product: SW USB2.0 'Open' Host Controller (OHCI) Driver
  338. [ 1.784058] usb usb4: Manufacturer: Linux 3.10.65-BPI-M2U-Kernel ohci_hcd
  339. [ 1.784066] usb usb4: SerialNumber: sunxi-ohci
  340. [ 1.784907] hub 4-0:1.0: USB hub found
  341. [ 1.784927] hub 4-0:1.0: 1 port detected
  342. [ 1.785799] usbcore: registered new interface driver usb-storage
  343. [ 1.785965] usbcore: registered new interface driver ums-alauda
  344. [ 1.786103] usbcore: registered new interface driver ums-cypress
  345. [ 1.786239] usbcore: registered new interface driver ums-datafab
  346. [ 1.786376] usbcore: registered new interface driver ums_eneub6250
  347. [ 1.786511] usbcore: registered new interface driver ums-freecom
  348. [ 1.786643] usbcore: registered new interface driver ums-isd200
  349. [ 1.786774] usbcore: registered new interface driver ums-jumpshot
  350. [ 1.786907] usbcore: registered new interface driver ums-karma
  351. [ 1.787039] usbcore: registered new interface driver ums-onetouch
  352. [ 1.787195] usbcore: registered new interface driver ums-realtek
  353. [ 1.787329] usbcore: registered new interface driver ums-sddr09
  354. [ 1.787464] usbcore: registered new interface driver ums-sddr55
  355. [ 1.787605] usbcore: registered new interface driver ums-usbat
  356. [ 1.787922] usbcore: registered new interface driver usbserial
  357. [ 1.788058] usbcore: registered new interface driver usbserial_generic
  358. [ 1.788185] usbserial: USB Serial support registered for generic
  359. [ 1.788922] mousedev: PS/2 mouse device common for all mice
  360. [ 1.789684] sunxi_keyboard_startup: keyboard has no clk.
  361. [ 1.790088] input: sunxi-keyboard as /devices/virtual/input/input1
  362. [ 1.791296] sunxi-rtc rtc: rtc core: registered sunxi-rtc as rtc0
  363. [ 1.791328] sunxi-rtc rtc: RTC enabled
  364. [ 1.791859] i2c /dev entries driver
  365. [ 1.793049] IR NEC protocol handler initialized
  366. [ 1.793378] Registered IR keymap rc_map_sunxi
  367. [ 1.793925] input: sunxi_ir_recv as /devices/soc/ir0/rc/rc0/input2
  368. [ 1.794197] rc0: sunxi_ir_recv as /devices/soc/ir0/rc/rc0
  369. [ 1.794895] axp22_dcdc1: unsupportable voltage range: 858992688-3400000uV
  370. [ 1.803287] sunxi cedar version 0.1
  371. [ 1.803382] [cedar]: install start!!!
  372. [ 1.803448] cedar_ve: cedar-ve the get irq is 85
  373. [ 1.803931] [cedar]: install end!!!
  374. [ 1.804828] input: axp22-powerkey as /devices/soc/twi0/i2c-0/0-0034/axp22-powerkey/input/input3
  375. [ 1.818955] sunxi gpu cooling probe start !
  376. [ 1.818976] CPU gpu cooling register Success
  377. [ 1.819990] sunxi-wdt 1c20c90.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0)
  378. [ 1.820450] device-mapper: uevent: version 1.0.3
  379. [ 1.820842] device-mapper: ioctl: 4.24.0-ioctl (2013-01-15) initialised: dm-devel@redhat.com
  380. [ 1.821158] Bluetooth: Virtual HCI driver ver 1.3
  381. [ 1.822188] cpuidle: using governor ladder
  382. [ 1.822198] cpuidle: using governor menu
  383. [ 1.823212] sunxi-mmc sdc0: SD/MMC/SDIO Host Controller Driver(v0.59 2016-08-17 15:15) Compiled in Feb 18 2017 at 17:36:56
  384. [ 1.823245] sunxi-mmc sdc0: ***ctl-spec-caps*** 8
  385. [ 1.823262] sunxi-mmc sdc0: regulator prop vmmc,str vcc-sdcv
  386. [ 1.823271] sunxi-mmc sdc0: regulator prop vqmmc,str vcc-sdcvq33
  387. [ 1.823280] sunxi-mmc sdc0: regulator prop vdmmc,str vcc-sdcvd
  388. [ 1.823869] sunxi-mmc sdc0: Got CD GPIO #237.
  389. [ 1.824180] sunxi-mmc sdc0: base:0xf1c0f000 irq:64
  390. [ 1.824656] sunxi-mmc sdc2: SD/MMC/SDIO Host Controller Driver(v0.59 2016-08-17 15:15) Compiled in Feb 18 2017 at 17:36:56
  391. [ 1.824685] sunxi-mmc sdc2: regulator prop vmmc,str vcc-emmcv
  392. [ 1.824695] sunxi-mmc sdc2: regulator prop vqmmc,str vcc-emmcv
  393. [ 1.824704] sunxi-mmc sdc2: regulator prop vdmmc,str none
  394. [ 1.824756] axp22_dcdc1: Failed to create debugfs directory
  395. [ 1.824787] sunxi-mmc sdc2: No vdmmc regulator found
  396. [ 1.825427] sunxi-mmc sdc2: sdc set ios: clk 0Hz bm PP pm UP vdd 22 width 1 timing LEGACY(SDR12) dt B
  397. [ 1.840028] sunxi-mmc sdc2: sdc set ios: clk 400000Hz bm PP pm ON vdd 22 width 1 timing LEGACY(SDR12) dt B
  398. [ 1.860066] sunxi-mmc sdc2: base:0xf1c11000 irq:66
  399. [ 1.860469] sunxi-mmc sdc1: SD/MMC/SDIO Host Controller Driver(v0.59 2016-08-17 15:15) Compiled in Feb 18 2017 at 17:36:56
  400. [ 1.860512] sunxi-mmc sdc1: Can't get vmmc regulator string
  401. [ 1.860520] sunxi-mmc sdc1: Can't get vqmmc regulator string
  402. [ 1.860527] sunxi-mmc sdc1: Can't get vdmmc regulator string
  403. [ 1.860532] get() with no identifier
  404. [ 1.864526] get() with no identifier
  405. [ 1.868494] get() with no identifier
  406. [ 1.872694] sunxi-mmc sdc1: No vmmc regulator found
  407. [ 1.872703] sunxi-mmc sdc1: No vqmmc regulator found
  408. [ 1.872709] sunxi-mmc sdc1: No vdmmc regulator found
  409. [ 1.873389] sunxi-mmc sdc1: sdc set ios: clk 0Hz bm PP pm UP vdd 21 width 1 timing LEGACY(SDR12) dt B
  410. [ 1.873420] sunxi-mmc sdc1: no vqmmc,Check if there is regulator
  411. [ 1.880061] ata1: SATA link down (SStatus 0 SControl 300)
  412. [ 1.890108] sunxi-mmc sdc1: sdc set ios: clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
  413. [ 1.910072] sunxi-mmc sdc1: base:0xf1c10000 irq:65
  414. [ 1.911075] gpio_led_probe start
  415. [ 1.911122] led1 gpio number is 244
  416. [ 1.911129] led1_trigger led trigger name is default-on
  417. [ 1.911137] led2 gpio number is 245
  418. [ 1.911143] led2_trigger led trigger name is heartbeat
  419. [ 1.911151] led3 gpio number is 246
  420. [ 1.911156] led3_trigger led trigger name is mmc0
  421. [ 1.915985] hidraw: raw HID events driver (C) Jiri Kosina
  422. [ 1.920064] *mmc0 detect cd change*
  423. [ 1.924017] *mmc0 lock*
  424. [ 1.926799] sunxi-mmc sdc0: sdc set ios: clk 0Hz bm PP pm UP vdd 22 width 1 timing LEGACY(SDR12) dt B
  425. [ 1.940098] sunxi-mmc sdc0: sdc set ios: clk 400000Hz bm PP pm ON vdd 22 width 1 timing LEGACY(SDR12) dt B
  426. [ 1.945490] usbcore: registered new interface driver usbhid
  427. [ 1.945502] usbhid: USB HID core driver
  428. [ 1.950332] usbcore: registered new interface driver snd-usb-audio
  429. [ 1.952374] headphonevol:59, spkervol:27, maingain:4, pa_sleep_time:350
  430. [ 1.958651] sunxi-codec-machine sndcodec: sun8iw11codec <-> 1c22c00.cpudai0-controller mapping ok
  431. [ 1.960895] sunxi-mmc sdc0: smc 0 p0 err, cmd 52, RTO !!
  432. [ 1.967786] sunxi-mmc sdc0: smc 0 p0 err, cmd 52, RTO !!
  433. [ 1.973884] sunxi-mmc sdc0: sdc set ios: clk 400000Hz bm PP pm ON vdd 22 width 1 timing LEGACY(SDR12) dt B
  434. [ 1.974034] input: audiocodec Headphone Jack as /devices/soc/sndcodec/sound/card0/input4
  435. [ 1.976374] sunxi-mmc sdc0: sdc set ios: clk 400000Hz bm PP pm ON vdd 22 width 1 timing LEGACY(SDR12) dt B
  436. [ 1.978658] sunxi-mmc sdc0: smc 0 p0 err, cmd 5, RTO !!
  437. [ 1.978823] sndhdmi sndhdmi: sndhdmi <-> audiohdmi mapping ok
  438. [ 1.985453] sunxi-mmc sdc0: smc 0 p0 err, cmd 5, RTO !!
  439. [ 1.992186] sunxi-mmc sdc0: smc 0 p0 err, cmd 5, RTO !!
  440. [ 1.998185] ipip: IPv4 over IPv4 tunneling driver
  441. [ 1.998920] sunxi-mmc sdc0: smc 0 p0 err, cmd 5, RTO !!
  442. [ 1.999101] TCP: cubic registered
  443. [ 1.999107] Initializing XFRM netlink socket
  444. [ 2.004951] NET: Registered protocol family 10
  445. [ 2.005523] sunxi-mmc sdc0: sdc set ios: clk 400000Hz bm PP pm ON vdd 15 width 1 timing LEGACY(SDR12) dt B
  446. [ 2.005609] sunxi-mmc sdc0: sdc set ios: clk 400000Hz bm PP pm ON vdd 15 width 1 timing LEGACY(SDR12) dt B
  447. [ 2.005874] mip6: Mobile IPv6
  448. [ 2.005882] sit: IPv6 over IPv4 tunneling driver
  449. [ 2.006804] NET: Registered protocol family 17
  450. [ 2.006839] NET: Registered protocol family 15
  451. [ 2.006986] Bluetooth: RFCOMM TTY layer initialized
  452. [ 2.007010] Bluetooth: RFCOMM socket layer initialized
  453. [ 2.007016] Bluetooth: RFCOMM ver 1.11
  454. [ 2.007022] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
  455. [ 2.007027] Bluetooth: BNEP filters: protocol multicast
  456. [ 2.007037] Bluetooth: BNEP socket layer initialized
  457. [ 2.007043] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
  458. [ 2.007053] Bluetooth: HIDP socket layer initialized
  459. [ 2.007091] 8021q: 802.1Q VLAN Support v1.8
  460. [ 2.007424] Key type dns_resolver registered
  461. [ 2.007444] Key type ceph registered
  462. [ 2.008034] sunxi-mmc sdc0: sdc set ios: clk 400000Hz bm PP pm ON vdd 15 width 1 timing LEGACY(SDR12) dt B
  463. [ 2.008155] libceph: loaded (mon/osd proto 15/24)
  464. [ 2.008649] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
  465. [ 2.010378] Key type encrypted registered
  466. [ 2.010979] [DISP] boot_disp:0x40a
  467. [ 2.012697] [HDMI] cec support = 0
  468. [ 2.037399] mmc0: host does not support reading read-only switch. assuming write-enable.
  469. [ 2.039354] sunxi-mmc sdc0: sdc set ios: clk 400000Hz bm PP pm ON vdd 15 width 1 timing SD-HS(SDR25) dt B
  470. [ 2.039433] sunxi-mmc sdc0: sdc set ios: clk 50000000Hz bm PP pm ON vdd 15 width 1 timing SD-HS(SDR25) dt B
  471. [ 2.039560] sunxi-mmc sdc0: sdc set ios: clk 50000000Hz bm PP pm ON vdd 15 width 4 timing SD-HS(SDR25) dt B
  472. [ 2.039592] mmc0: new high speed SDHC card at address 0007
  473. [ 2.525802] mmcblk0: mmc0:0007 SD32G 29.3 GiB
  474. [ 2.525841] [DISP] disp_device_attached,line:101:attched ok, mgr0<-->device0, type=4
  475. [ 2.527511] mmcblk0: p1 p2
  476. [ 2.529238] sunxi-mmc sdc2: smc 1 p2 err, cmd 52, RTO !!
  477. [ 2.535559] get usb_serial_number success from boot command line
  478. [ 2.536093] file system registered
  479. [ 2.536126] sunxi-mmc sdc2: smc 1 p2 err, cmd 52, RTO !!
  480. [ 2.542159] sunxi-mmc sdc2: sdc set ios: clk 400000Hz bm PP pm ON vdd 22 width 1 timing LEGACY(SDR12) dt B
  481. [ 2.544627] sunxi-mmc sdc2: sdc set ios: clk 400000Hz bm PP pm ON vdd 22 width 1 timing LEGACY(SDR12) dt B
  482. [ 2.545795] android_usb gadget: Mass Storage Function, version: 2009/09/11
  483. [ 2.545803] android_usb gadget: Number of LUNs=3
  484. [ 2.545810] lun0: LUN: removable file: (no medium)
  485. [ 2.545816] lun1: LUN: removable file: (no medium)
  486. [ 2.545822] lun2: LUN: removable file: (no medium)
  487. [ 2.546494] android_usb gadget: android_usb ready
  488. [ 2.546564] sunxi-mmc sdc2: smc 1 p2 err, cmd 8, RTO !!
  489. [ 2.552592] sunxi-rtc rtc: setting system clock to 2010-01-01 00:00:07 UTC (1262304007)
  490. [ 2.553315] sunxi-mmc sdc2: smc 1 p2 err, cmd 5, RTO !!
  491. [ 2.559466] ALSA device list:
  492. [ 2.559480] #0: audiocodec
  493. [ 2.559485] #1: sndhdmi
  494. [ 2.559724] md: Waiting for all devices to be available before autodetect
  495. [ 2.559731] md: If you don't use raid, use raid=noautodetect
  496. [ 2.560070] sunxi-mmc sdc2: smc 1 p2 err, cmd 5, RTO !!
  497. [ 2.560636] md: Autodetecting RAID arrays.
  498. [ 2.560640] md: Scanned 0 and added 0 devices.
  499. [ 2.560641] md: autorun ...
  500. [ 2.560643] md: ... autorun DONE.
  501. [ 2.566840] sunxi-mmc sdc2: smc 1 p2 err, cmd 5, RTO !!
  502. [ 2.573389] EXT3-fs (mmcblk0p2): error: couldn't mount because of unsupported optional features (2c0)
  503. [ 2.573583] sunxi-mmc sdc2: smc 1 p2 err, cmd 5, RTO !!
  504. [ 2.574414] sunxi-mmc sdc2: smc 1 p2 err, cmd 55, RTO !!
  505. [ 2.575242] sunxi-mmc sdc2: smc 1 p2 err, cmd 55, RTO !!
  506. [ 2.576070] sunxi-mmc sdc2: smc 1 p2 err, cmd 55, RTO !!
  507. [ 2.576899] sunxi-mmc sdc2: smc 1 p2 err, cmd 55, RTO !!
  508. [ 2.576920] sunxi-mmc sdc2: sdc set ios: clk 400000Hz bm OD pm ON vdd 22 width 1 timing LEGACY(SDR12) dt B
  509. [ 2.577326] sunxi-mmc sdc2: sdc set ios: clk 400000Hz bm OD pm ON vdd 7 width 1 timing LEGACY(SDR12) dt B
  510. [ 2.577374] sunxi-mmc sdc2: sdc set ios: clk 400000Hz bm OD pm ON vdd 7 width 1 timing LEGACY(SDR12) dt B
  511. [ 2.577420] sunxi-mmc sdc2: sdc set ios: clk 400000Hz bm OD pm ON vdd 7 width 1 timing LEGACY(SDR12) dt B
  512. [ 2.579823] sunxi-mmc sdc2: sdc set ios: clk 400000Hz bm OD pm ON vdd 7 width 1 timing LEGACY(SDR12) dt B
  513. [ 2.614440] EXT2-fs (mmcblk0p2): error: couldn't mount because of unsupported optional features (2c0)
  514. [ 2.621314] sunxi-mmc sdc2: sdc set ios: clk 400000Hz bm PP pm ON vdd 7 width 1 timing LEGACY(SDR12) dt B
  515. [ 2.632886] mmc1: BKOPS_EN bit is not set
  516. [ 2.633859] sunxi-mmc sdc2: sdc set ios: clk 400000Hz bm PP pm ON vdd 7 width 1 timing MMC-HS(SDR20) dt B
  517. [ 2.633926] mmc1: Check switch ready sunxi_mmc_check_timing_switch_done
  518. [ 2.634258] sunxi-mmc sdc2: sdc set ios: clk 50000000Hz bm PP pm ON vdd 7 width 1 timing MMC-HS(SDR20) dt B
  519. [ 2.634407] sunxi-mmc sdc2: sdc set ios: clk 50000000Hz bm PP pm ON vdd 7 width 8 timing MMC-HS(SDR20) dt B
  520. [ 2.634538] mmc1: new high speed MMC card at address 0001
  521. [ 2.635121] mmcblk1: mmc1:0001 8WPD3R 7.28 GiB
  522. [ 2.635302] mmcblk1boot0: mmc1:0001 8WPD3R partition 1 4.00 MiB
  523. [ 2.635470] mmcblk1boot1: mmc1:0001 8WPD3R partition 2 4.00 MiB
  524. [ 2.637085] mmcblk1: unknown partition table
  525. [ 2.639659] mmcblk1boot1: unknown partition table
  526. [ 2.641182] mmcblk1boot0: unknown partition table
  527. [ 2.642324] sunxi-mmc sdc1: smc 2 p1 err, cmd 52, RTO !!
  528. [ 2.649208] sunxi-mmc sdc1: smc 2 p1 err, cmd 52, RTO !!
  529. [ 2.654669] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
  530. [ 2.654709] VFS: Mounted root (ext4 filesystem) on device 179:2.
  531. [ 2.655257] sunxi-mmc sdc1: sdc set ios: clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
  532. [ 2.657706] sunxi-mmc sdc1: sdc set ios: clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
  533. [ 2.658037] devtmpfs: mounted
  534. [ 2.658479] Freeing unused kernel memory: 292K (c0b9d000 - c0be6000)
  535. [ 2.658522] Failed to execute /init. Attempting defaults...
  536. [ 2.659588] sunxi-mmc sdc1: smc 2 p1 err, cmd 8, RTO !!
  537. [ 2.660411] sunxi-mmc sdc1: smc 2 p1 err, cmd 5, RTO !!
  538. [ 2.661239] sunxi-mmc sdc1: smc 2 p1 err, cmd 5, RTO !!
  539. [ 2.662061] sunxi-mmc sdc1: smc 2 p1 err, cmd 5, RTO !!
  540. [ 2.662884] sunxi-mmc sdc1: smc 2 p1 err, cmd 5, RTO !!
  541. [ 2.663708] sunxi-mmc sdc1: smc 2 p1 err, cmd 55, RTO !!
  542. [ 2.664531] sunxi-mmc sdc1: smc 2 p1 err, cmd 55, RTO !!
  543. [ 2.665353] sunxi-mmc sdc1: smc 2 p1 err, cmd 55, RTO !!
  544. [ 2.666175] sunxi-mmc sdc1: smc 2 p1 err, cmd 55, RTO !!
  545. [ 2.666194] sunxi-mmc sdc1: sdc set ios: clk 400000Hz bm OD pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
  546. [ 2.667055] sunxi-mmc sdc1: smc 2 p1 err, cmd 1, RTO !!
  547. [ 2.667073] sunxi-mmc sdc1: sdc set ios: clk 0Hz bm OD pm OFF vdd 0 width 1 timing LEGACY(SDR12) dt B
  548. [ 11.134679] [VFE]cci_init end
  549. [ 11.153864] usbcore: registered new interface driver option
  550. [ 11.155684] usbserial: USB Serial support registered for GSM modem (1-port)
  551. [ 11.224049] [VFE]Welcome to Video Front End driver
  552. [ 11.224611] [VFE]csi0 probe end!
  553. [ 11.224841] [VFE]csi1 probe end!
  554. [ 11.225218] [VFE]csi_init end
  555. [ 11.225696] [VFE]sunxi_isp_platform_register end
  556. [ 11.226102] [VFE]mipi_init end
  557. [ 11.226117] [VFE]flash_init end
  558. [ 11.227831] [VFE]pdev->id = 0
  559. [ 11.227850] [VFE]dev->cci_sel = 0
  560. [ 11.227861] [VFE]dev->csi_sel = 0
  561. [ 11.227871] [VFE]dev->mipi_sel = 0
  562. [ 11.227881] [VFE]dev->isp_sel = 0
  563. [ 11.228006] [VFE_WARN]fetch csi0_dev0_power_en from device_tree failed
  564. [ 11.228092] [VFE_WARN]fetch csi0_dev0_flash_en from device_tree failed
  565. [ 11.228114] [VFE_WARN]fetch csi0_dev0_flash_mode from device_tree failed
  566. [ 11.228134] [VFE_WARN]fetch csi0_dev0_flvdd from device_tree failed
  567. [ 11.228155] [VFE_WARN]fetch csi0_dev0_flvdd_vol from device_tree failed
  568. [ 11.228175] [VFE_WARN]fetch csi0_dev0_af_pwdn from device_tree failed
  569. [ 11.228772] [VFE]vfe_init end
  570. [ 11.230160] [VFE]probe_work_handle start!
  571. [ 11.230614] [VFE]vfe_runtime_resume
  572. [ 11.243436] [VFE]..........................vfe clk open!.......................
  573. [ 11.243494] [VFE]v4l2 subdev register input_num = 0
  574. [ 11.243776] [VFE]vfe sensor detect start! input_num = 0
  575. [ 11.243801] [VFE]Find sensor name is "ov5640", i2c address is 78, type is "YUV" !
  576. [ 11.243815] [VFE]Sub device register "ov5640" i2c_addr = 0x78 start!
  577. [ 11.276970] [VFE]registered sensor subdev is OK!
  578. [ 11.276996] [VFE]Check sensor!
  579. [ 11.291531] [VFE]mclk on
  580. [ 11.366032] sunxi_i2c_do_xfer()902 - [i2c4] incomplete xfer (status: 0x20, dev addr: 0x3c)
  581. [ 11.366061] [VFE_DEV_I2C_ERR]cci_read_a16_d8 error! slave = 0x3c, addr = 0x300a, value = 0x 0
  582.  
  583. [ 11.366341] sunxi_i2c_do_xfer()902 - [i2c4] incomplete xfer (status: 0x20, dev addr: 0x3c)
  584. [ 11.366361] [VFE_DEV_I2C_ERR]cci_read_a16_d8 error! slave = 0x3c, addr = 0x300a, value = 0x 0
  585.  
  586. [ 11.366580] sunxi_i2c_do_xfer()902 - [i2c4] incomplete xfer (status: 0x20, dev addr: 0x3c)
  587. [ 11.366599] [VFE_DEV_I2C_ERR]cci_read_a16_d8 error! slave = 0x3c, addr = 0x300a, value = 0x 0
  588. ov5640 sensor read retry=2
  589. [ 11.366616] [OV5640]error at sensor_detect
  590. [ 11.366627] [OV5640]chip found is not an target chip.
  591. [ 11.366641] [VFE]mclk off
  592. [ 11.406212] [VFE]vfe sensor subdev unregister!
  593. [ 11.407900] sensor_remove ov5640 sd = de63d4c0!
  594. [ 11.408003] [VFE]Sub device register "ov5640" failed!
  595. [ 11.408021] [VFE_ERR]vfe sensor register check error at input_num = 0
  596. [ 11.408042] [VFE]V4L2 device registered as (null)
  597. [ 11.408137] [VFE]vfe_runtime_suspend
  598. [ 11.408151] [VFE]..........................vfe clk close!.......................
  599. [ 11.414841] [VFE]probe_work_handle end!
  600. [ 30.998488] libphy: gmac0: probed
  601. [ 31.030241] sunxi-gmac gmac0 eth0: eth0: Type(6) PHY ID 001cc915 at 1 IRQ poll (gmac0-0:01)
  602. [ 31.042275] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
  603. [ 35.030362] libphy: gmac0-0:01 - Link is Up - 100/Full
  604. [ 35.030417] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!