API tools faq
paste
Advertisement
Guest User

Untitled

a guest
Jan 30th, 2015
242
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 17.39 KB | None | 0 0
raw download clone embed print report
  1. dmesg
  2. [ 0.000000] Booting Linux on physical CPU 0
  3. [ 0.000000] Initializing cgroup subsys cpuset
  4. [ 0.000000] Initializing cgroup subsys cpu
  5. [ 0.000000] Linux version 3.4.103 (hugo@ubuntu) (gcc version 4.7.3 (Timesys 20130826) ) #14 SMP PREEMPT Fri Jan 30 16:36:19 CET 2015
  6. [ 0.000000] CPU: ARMv7 Processor [410fc074] revision 4 (ARMv7), cr=10c5387d
  7. [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
  8. [ 0.000000] Machine: sun7i
  9. [ 0.000000] Memory Reserved:
  10. [ 0.000000] SYS : 0x43000000 - 0x4300ffff ( 64 kB)
  11. [ 0.000000] G2D : 0x50000000 - 0x50ffffff ( 16 MB)
  12. [ 0.000000] LCD : 0x51000000 - 0x52ffffff ( 32 MB)
  13. [ 0.000000] cma: CMA: reserved 192 MiB at 43c00000
  14. [ 0.000000] Memory policy: ECC disabled, Data cache writealloc
  15. [ 0.000000] sunxi: Allwinner A20 (AW1651/sun7i) detected.
  16. [ 0.000000] On node 0 totalpages: 262144
  17. [ 0.000000] free_area_init_node: node 0, pgdat c0883cc0, node_mem_map d3000000
  18. [ 0.000000] DMA zone: 512 pages used for memmap
  19. [ 0.000000] DMA zone: 0 pages reserved
  20. [ 0.000000] DMA zone: 65024 pages, LIFO batch:15
  21. [ 0.000000] Normal zone: 1008 pages used for memmap
  22. [ 0.000000] Normal zone: 128016 pages, LIFO batch:31
  23. [ 0.000000] HighMem zone: 528 pages used for memmap
  24. [ 0.000000] HighMem zone: 67056 pages, LIFO batch:15
  25. [ 0.000000] PERCPU: Embedded 7 pages/cpu @d3808000 s6656 r8192 d13824 u32768
  26. [ 0.000000] pcpu-alloc: s6656 r8192 d13824 u32768 alloc=8*4096
  27. [ 0.000000] pcpu-alloc: [0] 0 [0] 1
  28. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 260096
  29. [ 0.000000] Kernel command line: console=ttyS0,115200 root=/dev/mmcblk0p2 rootwait loglevel=8 panic=10
  30. [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
  31. [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
  32. [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
  33. [ 0.000000] allocated 2097152 bytes of page_cgroup
  34. [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
  35. [ 0.000000] Memory: 1024MB = 1024MB total
  36. [ 0.000000] Memory: 780648k/780648k available, 267928k reserved, 270336K highmem
  37. [ 0.000000] Virtual kernel memory layout:
  38. [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  39. [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
  40. [ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB)
  41. [ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB)
  42. [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
  43. [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
  44. [ 0.000000] .text : 0xc0008000 - 0xc078f738 (7710 kB)
  45. [ 0.000000] .init : 0xc0790000 - 0xc081ca00 ( 563 kB)
  46. [ 0.000000] .data : 0xc081e000 - 0xc088aa50 ( 435 kB)
  47. [ 0.000000] .bss : 0xc088aa74 - 0xc0a56550 (1839 kB)
  48. [ 0.000000] SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
  49. [ 0.000000] Preemptible hierarchical RCU implementation.
  50. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
  51. [ 0.000000] Additional per-CPU info printed with stalls.
  52. [ 0.000000] NR_IRQS:192
  53. [ 0.000000] REGISTERED I2C-0 DEVICES
  54. [ 0.000000] REGISTERED I2C-2 DEVICES
  55. [ 0.000000] Architected local timer running at 24.00MHz.
  56. [ 0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms
  57. [ 0.000000] start_kernel(): bug: interrupts were enabled early
  58. [ 0.000000] Console: colour dummy device 80x30
  59. [ 0.010879] Calibrating delay loop... 1915.28 BogoMIPS (lpj=9576448)
  60. [ 0.076018] pid_max: default: 32768 minimum: 301
  61. [ 0.079683] Mount-cache hash table entries: 512
  62. [ 0.083920] Initializing cgroup subsys cpuacct
  63. [ 0.087238] Initializing cgroup subsys memory
  64. [ 0.090659] Initializing cgroup subsys devices
  65. [ 0.094093] Initializing cgroup subsys freezer
  66. [ 0.097318] Initializing cgroup subsys blkio
  67. [ 0.100992] Initializing cgroup subsys perf_event
  68. [ 0.104567] CPU: Testing write buffer coherency: ok
  69. [ 0.109751] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
  70. [ 0.116846] hw perfevents: enabled with ARMv7 Cortex-A7 PMU driver, 5 counters available
  71. [ 0.122384] Setting up static identity map for 0x40539c48 - 0x40539c7c
  72. [ 0.238271] CPU1: Booted secondary processor
  73. [ 0.297236] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
  74. [ 0.299239] Brought up 2 CPUs
  75. [ 0.304549] SMP: Total of 2 processors activated (3830.57 BogoMIPS).
  76. [ 0.307695] devtmpfs: initialized
  77. [ 0.312919] dummy:
  78. [ 0.322128] NET: Registered protocol family 16
  79. [ 0.344714] DMA: preallocated 256 KiB pool for atomic coherent allocations
  80. [ 0.352410] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
  81. [ 0.357203] hw-breakpoint: maximum watchpoint size is 8 bytes.
  82. [ 0.360381] [ccu-inf] aw clock manager init
  83. [ 0.362653] [ccu-inf] aw_ccu_init
  84. [ 0.366605] [ccu-inf] script config pll3 to 297MHz
  85. [ 0.370357] [ccu-inf] script config pll4 to 300MHz
  86. [ 0.374123] [ccu-inf] script config pll6 to 600MHz
  87. [ 0.377871] [ccu-inf] script config pll7 to 297MHz
  88. [ 0.381617] [ccu-inf] script config pll8 to 336MHz
  89. [ 0.384373] Init eGon pin module V2.0
  90. [ 0.393697] bio: create slab <bio-0> at 0
  91. [ 0.397246] sunxi_gpio driver init ver 1.3
  92. [ 0.403011] gpiochip_add: registered GPIOs 1 to 23 on device: A1X_GPIO
  93. [ 0.407768] usbcore: registered new interface driver usbfs
  94. [ 0.412129] usbcore: registered new interface driver hub
  95. [ 0.416284] usbcore: registered new device driver usb
  96. [ 0.419264] Linux media interface: v0.10
  97. [ 0.422890] Linux video capture interface: v2.00
  98. [ 0.429051] cfg80211: Calling CRDA to update world regulatory domain
  99. [ 0.433363] Switching to clocksource arch_sys_counter
  100. [ 0.435451] FS-Cache: Loaded
  101. [ 0.437639] CacheFiles: Loaded
  102. [ 0.445601] [usb_manager]: CONFIG_USB_SW_SUNXI_USB0_OTG
  103. [ 0.449267] [sw_hcd0]: usb host driver initialize........
  104. [ 0.453428] [sw_hcd0]: open_usb_clock
  105. [ 0.477653] [sw_hcd0]: host_init_state = 1
  106. [ 0.478624] [sw_hcd0]: platform is usb host
  107. [ 0.481532] [sw_hcd0]: sw_hcd_host0: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx (X), HB-ISO Tx (X), SoftConn)
  108. [ 0.492714] [sw_hcd0]: sw_hcd_init_controller: sw_hcd_host0: USB Host mode controller at f1c13000 using PIO, IRQ 70
  109. [ 0.505251] sw_hcd_host0 sw_hcd_host0: sw_hcd host driver
  110. [ 0.511962] sw_hcd_host0 sw_hcd_host0: new USB bus registered, assigned bus number 1
  111. [ 0.515280] hub 1-0:1.0: USB hub found
  112. [ 0.518205] hub 1-0:1.0: 1 port detected
  113. [ 0.521194] is_on = 1, hcd0_set_vbus_cnt = 1
  114. [ 0.524158] [sw_hcd_host0]: Set USB Power On
  115. [ 0.525338] [sw_udc]: udc_init: version 20080411
  116. [ 0.531351] NET: Registered protocol family 2
  117. [ 0.547506] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
  118. [ 0.554423] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
  119. [ 0.561860] TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
  120. [ 0.568455] TCP: Hash tables configured (established 131072 bind 65536)
  121. [ 0.570661] TCP: reno registered
  122. [ 0.575538] UDP hash table entries: 512 (order: 2, 16384 bytes)
  123. [ 0.580887] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
  124. [ 0.584505] NET: Registered protocol family 1
  125. [ 0.589841] RPC: Registered named UNIX socket transport module.
  126. [ 0.593502] RPC: Registered udp transport module.
  127. [ 0.597191] RPC: Registered tcp transport module.
  128. [ 0.602582] RPC: Registered tcp NFSv4.1 backchannel transport module.
  129. [ 0.607914] audit: initializing netlink socket (disabled)
  130. [ 0.611611] type=2000 audit(0.590:1): initialized
  131. [ 0.615844] highmem bounce pool size: 64 pages
  132. [ 0.627412] VFS: Disk quotas dquot_6.5.2
  133. [ 0.632873] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  134. [ 0.639659] NFS: Registering the id_resolver key type
  135. [ 0.644121] NTFS driver 2.1.30 [Flags: R/W].
  136. [ 0.647376] fuse init (API version 7.18)
  137. [ 0.650715] msgmni has been set to 1380
  138. [ 0.658211] alg: No test for stdrng (krng)
  139. [ 0.664885] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
  140. [ 0.667800] io scheduler noop registered
  141. [ 0.671025] io scheduler deadline registered
  142. [ 0.674716] io scheduler cfq registered (default)
  143. [ 0.679512] sunxi disp driver loaded (/dev/disp api 1.0)
  144. [ 0.684982] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled
  145. [ 0.689008] [uart]: used uart info.: 0xc5
  146. [ 0.693693] [uart]: serial probe 0 irq 33 mapbase 0x01c28000
  147. [ 0.719893] sunxi-uart.0: ttyS0 at MMIO 0x1c28000 (irq = 33) is a U6_16550A
  148. [ 1.494534] console [ttyS0] enabled
  149. [ 1.502834] [uart]: serial probe 2 irq 35 mapbase 0x01c28800
  150. [ 1.534614] sunxi-uart.2: ttyS1 at MMIO 0x1c28800 (irq = 35) is a U6_16550A
  151. [ 1.546345] [uart]: serial probe 6 irq 51 mapbase 0x01c29800
  152. [ 1.578085] sunxi-uart.6: ttyS2 at MMIO 0x1c29800 (irq = 51) is a U6_16550A
  153. [ 1.589794] [uart]: serial probe 7 irq 52 mapbase 0x01c29c00
  154. [ 1.621528] sunxi-uart.7: ttyS3 at MMIO 0x1c29c00 (irq = 52) is a U6_16550A
  155. [ 1.631518] brd: module loaded
  156. [ 1.639670] loop: module loaded
  157. [ 1.649418] pwm-sunxi: pwm0 configured - period: 1000, duty_percent: 100, duty: 1000
  158. [ 1.660596] sunxi_emac Using mii phy on PortA
  159. [ 1.679639] sunxi_emac Using MAC from SID: 02:ca:04:82:b4:fb
  160. [ 1.691563] emac_init fetch emac using configuration failed
  161. [ 1.699785] gmac driver is disabled
  162. [ 1.706487] PPP generic driver version 2.4.2
  163. [ 1.714590] PPP BSD Compression module registered
  164. [ 1.723309] PPP Deflate Compression module registered
  165. [ 1.733285] PPP MPPE Compression module registered
  166. [ 1.741517] NET: Registered protocol family 24
  167. [ 1.751849] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  168. [ 1.763589] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  169. [ 1.774860] usbcore: registered new interface driver cdc_acm
  170. [ 1.787484] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
  171. [ 1.800160] usbcore: registered new interface driver cdc_wdm
  172. [ 1.810720] usbcore: registered new interface driver usbserial
  173. [ 1.822079] usbcore: registered new interface driver usbserial_generic
  174. [ 1.832655] USB Serial support registered for generic
  175. [ 1.841018] usbserial: USB Serial Driver core
  176. [ 1.849947] usbcore: registered new interface driver cp210x
  177. [ 1.859465] USB Serial support registered for cp210x
  178. [ 1.869178] usbcore: registered new interface driver ftdi_sio
  179. [ 1.880265] USB Serial support registered for FTDI USB Serial Device
  180. [ 1.891445] ftdi_sio: v1.6.0:USB FTDI Serial Converters Driver
  181. [ 1.901848] usbcore: registered new interface driver pl2303
  182. [ 1.911368] USB Serial support registered for pl2303
  183. [ 1.921047] mousedev: PS/2 mouse device common for all mice
  184. [ 1.932198] ===========================hv_keypad_init=====================
  185. [ 1.942467] ========HV Inital ===================
  186. [ 1.950916] hv_keyboard: script_parser_fetch err.
  187. [ 1.959967] =========script_parser_fetch_err============
  188. [ 1.967203] hv_keypad_init: err.
  189. [ 1.972981] i2c /dev entries driver
  190. [ 1.980072] config i2c gpio with gpio_config api
  191. [ 1.988000] I2C: i2c-0: AW16XX I2C adapter
  192. [ 1.995457] config i2c gpio with gpio_config api
  193. [ 2.006149] at24 1-0050: 8192 byte 24c64 EEPROM, writable, 32 bytes/write
  194. [ 2.017862] rtc-m41t80 1-0068: chip found, driver version 0.05
  195. [ 2.030142] rtc-m41t80 1-0068: rtc core: registered m41t82 as rtc0
  196. [ 2.041359] rtc-m41t80 1-0068: HT bit was set!
  197. [ 2.050768] rtc-m41t80 1-0068: Power Down at 2015-01-30 15:37:05
  198. [ 2.060842] I2C: i2c-1: AW16XX I2C adapter
  199. [ 2.068319] config i2c gpio with gpio_config api
  200. [ 2.080482] gpiochip_add: registered GPIOs 100 to 107 on device: pca9554
  201. [ 2.090263] I2C: i2c-2: AW16XX I2C adapter
  202. [ 2.096356] dac5571 probed!
  203. [ 2.101916] [mmc-msg] sw_mci_init
  204. [ 2.110997] [mmc-msg] MMC host used card: 0x9, boot card: 0x0, io_card 8
  205. [ 2.123479] [mmc-msg] sdc0 set round clock 400000, src 24000000
  206. [ 2.137676] [mmc-msg] sdc0 set ios: clk 0Hz bm OD pm OFF vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  207. [ 2.154931] [mmc-msg] sdc0 Probe: base:0xf00ce000 irq:64 sg_cpu:c3c40000(43c40000) ret 0.
  208. [ 2.168627] [mmc-msg] sdc3 set round clock 400000, src 24000000
  209. [ 2.182744] [mmc-msg] sdc3 set ios: clk 0Hz bm OD pm OFF vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  210. [ 2.199976] [mmc-msg] sdc3 Probe: base:0xf00d0000 irq:67 sg_cpu:c3c41000(43c41000) ret 0.
  211. [ 2.212206] [mmc_pm]: no sdio card used in configuration
  212. [ 2.219877] sunxi_leds driver init
  213. [ 2.228922] sunxi_leds_init leds_used is false. Skip leds initialization
  214. [ 2.240595] ledtrig-cpu: registered to indicate activity on CPUs
  215. [ 2.251759] usbcore: registered new interface driver usbhid
  216. [ 2.260135] usbhid: USB HID core driver
  217. [ 2.268557] usbcore: registered new interface driver r8712u
  218. [ 2.276759] ashmem: initialized
  219. [ 2.283468] logger: created 256K log 'log_main'
  220. [ 2.291777] logger: created 256K log 'log_events'
  221. [ 2.300138] logger: created 256K log 'log_radio'
  222. [ 2.308494] logger: created 256K log 'log_system'
  223. [ 2.316665] IPv4 over IPv4 tunneling driver
  224. [ 2.323555] TCP: bic registered
  225. [ 2.328994] TCP: cubic registered
  226. [ 2.334828] TCP: westwood registered
  227. [ 2.341020] TCP: highspeed registered
  228. [ 2.346951] TCP: hybla registered
  229. [ 2.352437] TCP: htcp registered
  230. [ 2.357934] TCP: vegas registered
  231. [ 2.363421] TCP: veno registered
  232. [ 2.369176] TCP: scalable registered
  233. [ 2.374750] TCP: lp registered
  234. [ 2.379986] TCP: yeah registered
  235. [ 2.385731] TCP: illinois registered
  236. [ 2.392528] Initializing XFRM netlink socket
  237. [ 2.400840] NET: Registered protocol family 10
  238. [ 2.409782] NET: Registered protocol family 17
  239. [ 2.417693] NET: Registered protocol family 15
  240. [ 2.426789] lib80211: common routines for IEEE802.11 drivers
  241. [ 2.436632] lib80211_crypt: registered algorithm 'NULL'
  242. [ 2.445515] Registering the dns_resolver key type
  243. [ 2.452216] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 4
  244. [ 2.468445] Registering SWP/SWPB emulation handler
  245. [ 2.476724] registered taskstats version 1
  246. [ 3.132327] [mmc-msg] mmc 0 detect change, present 1
  247. [ 3.272052] Console: switching to colour frame buffer device 100x60
  248. [ 3.293468] I2C: i2c-3: HDMI I2C adapter
  249. [ 3.326488] console [netcon0] enabled
  250. [ 3.333635] netconsole: network logging started
  251. [ 3.341509] =========gt911 USED============
  252. [ 3.346962] INT PORT: 18
  253. [ 3.351503] IRQ PORT GTP: 181 181
  254. [ 3.359261] Guitar reset via port 4011675520 - int 4011675264
  255. [ 3.498126] GTP gpios requested: int 4011675264 - rst 4011675520
  256. [ 3.550082] input: Goodix Capacitive TouchScreen as /devices/virtual/input/input0
  257. [ 3.566938] rtc-m41t80 1-0068: setting system clock to 2015-01-30 15:49:11 UTC (1422632951)
  258. [ 3.580178] Waiting for root device /dev/mmcblk0p2...
  259. [ 3.641347] [mmc-msg] sdc0 set ios: clk 0Hz bm PP pm UP vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  260. [ 3.652751] [mmc-msg] sdc0 power on
  261. [ 3.681759] [mmc-msg] sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  262. [ 3.696057] [mmc-msg] sdc0 set round clock 400000, src 24000000
  263. [ 3.779064] [mmc-err] smc 0 err, cmd 52, RTO
  264. [ 3.787557] [mmc-err] smc 0 err, cmd 52, RTO
  265. [ 3.800257] [mmc-msg] sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  266. [ 3.820399] [mmc-msg] sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  267. [ 3.835140] [mmc-err] smc 0 err, cmd 5, RTO
  268. [ 3.843447] [mmc-err] smc 0 err, cmd 5, RTO
  269. [ 3.851755] [mmc-err] smc 0 err, cmd 5, RTO
  270. [ 3.860065] [mmc-err] smc 0 err, cmd 5, RTO
  271. [ 3.873345] [mmc-msg] sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  272. [ 3.891080] [mmc-msg] sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  273. [ 3.911196] [mmc-msg] sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  274. [ 3.954022] [mmc-msg] sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing SD-HS(SDR25) dt B
  275. [ 3.971754] [mmc-msg] sdc0 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 1 timing SD-HS(SDR25) dt B
  276. [ 3.986380] [mmc-msg] sdc0 set round clock 42857143, src 600000000
  277. [ 4.056053] [mmc-msg] sdc0 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 4 timing SD-HS(SDR25) dt B
  278. [ 4.070024] mmc0: new high speed SDHC card at address b368
  279. [ 4.079380] mmcblk0: mmc0:b368 USD 7.45 GiB
  280. [ 4.087119] mmcblk0: p1 p2
  281. [ 4.142699] EXT3-fs (mmcblk0p2): error: couldn't mount because of unsupported optional features (240)
  282. [ 4.162163] EXT2-fs (mmcblk0p2): error: couldn't mount because of unsupported optional features (244)
  283. [ 4.552116] EXT4-fs (mmcblk0p2): recovery complete
  284. [ 4.568964] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
  285. [ 4.582078] VFS: Mounted root (ext4 filesystem) on device 179:2.
  286. [ 4.595959] devtmpfs: mounted
  287. [ 4.602249] Freeing init memory: 560K
  288. [ 5.327591] udev[89]: starting version 167
  289. [ 7.082861] EXT4-fs (mmcblk0p2): re-mounted. Opts: data=ordered
  290. [ 12.657710] sunxi_emac sunxi_emac.0: eth0: link down
  291. [ 12.667720] ADDRCONF(NETDEV_UP): eth0: link is not ready
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!