API tools faq
paste
Guest User

Untitled

a guest
Feb 7th, 2014
19
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 4.82 KB | None | 0 0
raw download clone embed print report
  1. <6>[ 953.892211] [TP] back key pressed
  2. <6>[ 954.038330] [TP] virtual key released
  3. <6>[ 954.049041] [TP] Screen:F[01]:Down, X=4194297, Y=4194297, W=7, Z=77
  4. <6>[ 954.126312] [TP] home key pressed
  5. <6>[ 954.184204] [TP] virtual key released
  6. <6>[ 954.189819] [BB] led_current_set 255
  7. <6>[ 954.194000] [LED]pm8xxx_led_current_set_flagged, bank:6, brightness:255
  8. <6>[ 954.200714] [GSNR][BMA250_BOSCH] bma250_enable_store: data = 1
  9. <6>[ 954.210723] [GSNR][BMA250_BOSCH] bma250_set_enable: enable = 1
  10. <6>[ 954.216735] [GSNR][BMA250_BOSCH] bma250_set_mode++: mode = 0, bma250->ref_count = 0
  11. <7>[ 954.223907] [GSNR][BMA250_BOSCH] bma250_set_mode: Set to High Power mode!!
  12. <7>[ 954.232116] [GSNR][BMA250_BOSCH] m7_g_sensor_power_LPM, on = 0, g_sensor_vreg_8921_l17 = 0xed006700
  13. <7>[ 954.241577] [GSNR][BMA250_BOSCH] m7_g_sensor_power_LPM, Set to Normal Mode
  14. <7>[ 954.248657] [GSNR][BMA250_BOSCH]m7_g_sensor_power_LPM: unlock 5
  15. <6>[ 954.254730] [GSNR][BMA250_BOSCH] bma250_set_mode--33: mode = 0, bma250->ref_count = 1
  16. <6>[ 954.268035] [LS][cm3629] lightsensor_open, calibration:1
  17. <6>[ 954.273834] [LS][cm3629] lightsensor_ioctl LIGHTSENSOR_IOCTL_ENABLE, value = 1
  18. <6>[ 954.282104] [PS][cm3629] capella_pl_sensor_lpm_power: pl_sensor_lock lock
  19. <6>[ 954.290313] [TP] Screen:F[01]:Up, X=4194297, Y=4194297, W=0, Z=0
  20. <6>[ 954.297668] [PS][cm3629] capella_pl_sensor_lpm_power: leave lmp,OK
  21. <6>[ 954.305480] [PS][cm3629] capella_pl_sensor_lpm_power: pl_sensor_lock unlock 4
  22. <6>[ 954.312194] [LS][cm3629] lightsensor_enable
  23. <6>[ 954.316802] [LS][cm3629] get_ls_adc_value:resume 1
  24. <6>[ 954.329223] [LS][cm3629] get_ls_adc_value: raw adc = 0x0, ls_calibrate = 0
  25. <6>[ 954.345855] [cm3629] set_lsensor_range: low_thd = 0x0, high_thd = 0x7
  26. <6>[ 954.358154] dhd_set_suspend: Remove extra suspend setting
  27. <6>[ 954.364135] [LS][cm3629] report_lsensor_input_event: ADC=0x000, Level=0, l_thd equal 0, h_thd = 0x7, calibration 1
  28. <6>[ 954.386321] request_suspend_state: wakeup (3->0) at 954341117419 (2014-02-07 21:19:34.992785502 UTC)
  29. <6>[ 954.394500] [CPUQUIET]: cpuquiet_late_resume: release limit to 2 cores
  30. <6>[ 954.402984] [CPUFREQ_CAP]: cpufreq_late_resume: release limit freq to 702000
  31. <7>[ 954.409759] [DISP] sii9234_late_resume()
  32. <6>[ 954.412933] [TP] synaptics_ts_resume: enter
  33. <6>[ 954.417083] [LS][cm3629] get_ls_adc_value: raw adc = 0x20D, ls_calibrate = 0
  34. <6>[ 954.417114] [cm3629] set_lsensor_range: low_thd = 0x179, high_thd = 0x930
  35. <6>[ 954.417388] [TP] synaptics_ts_resume: Enable P-sensor by Touch
  36. <6>[ 954.417419] [PS][cm3629] psensor_enable_by_touch_driver on:1
  37. <6>[ 954.417419] [PS][cm3629] psensor_enable lpi->dynamical_threshold :1,lpi->mfg_mode:0
  38. <6>[ 954.417449] [PS][cm3629] capella_pl_sensor_lpm_power: pl_sensor_lock lock
  39. <6>[ 954.417449] [PS][cm3629] capella_pl_sensor_lpm_power: leave lmp,OK
  40. <6>[ 954.417510] [PS][cm3629] capella_pl_sensor_lpm_power: pl_sensor_lock unlock 4
  41. <6>[ 954.417541] [TP] psensor status 0 -> 1
  42. <6>[ 954.474151] [DISP] mipi_dsi_panel_power: on=1
  43. <6>[ 954.474548] [LS][cm3629] report_lsensor_input_event: ADC=0x22E, Level=5, l_thd = 0x179, h_thd = 0x930, calibration 1
  44. <6>[ 954.477691] [PS][cm3629] psensor_initial_cmd, finish
  45. <6>[ 954.477905] [PS][cm3629] pocket_mode_flag: 0, psensor_enable_by_touch: 1, add delay = 7ms
  46. <6>[ 954.484924] [PS][cm3629]ps1_adc = 0 retry
  47. <6>[ 954.486114] [PS][cm3629]ps1_adc = 0 retry
  48. <6>[ 954.487335] [PS][cm3629]ps1_adc = 0 retry
  49. <6>[ 954.488525] [PS][cm3629]ps1_adc = 0 retry
  50. <6>[ 954.489746] [PS][cm3629]ps1_adc = 0 retry
  51. <6>[ 954.490936] [PS][cm3629]ps1_adc = 0 retry
  52. <6>[ 954.492156] [PS][cm3629]ps1_adc = 0 retry
  53. <6>[ 954.493347] [PS][cm3629]ps1_adc = 0 retry
  54. <6>[ 954.494567] [PS][cm3629]ps1_adc = 0 retry
  55. <6>[ 954.495788] [PS][cm3629]ps1_adc = 0 retry
  56. <6>[ 954.496978] [PS][cm3629]ps1_adc = 0 retry
  57. <6>[ 954.498199] [PS][cm3629] proximity FAR, ps_adc=0, High thd= 14, interrupt_flag 0, calibration 1
  58. <6>[ 954.498229] [TP] psensor status 1 -> 3
  59. <6>[ 954.498260] [TP] synaptics_ts_close_psensor_func: Disable P-sensor by Touch
  60. <6>[ 954.498290] [PS][cm3629] psensor_enable_by_touch_driver on:0
  61. <6>[ 954.499023] [PS][cm3629] enable_ps_interrupt, write cmd[0] = 0x24, cmd[1] = 0x43
  62. <6>[ 954.499359] [PS][cm3629] enable_ps_interrupt, read value => cmd[0] = 0x24, cmd[1] = 0x43
  63. <6>[ 954.499389] [PS][cm3629] psensor_disable 1
  64. <6>[ 954.499420] [PS][cm3629] psensor_enable -
  65. <6>[ 954.499450] [PS][cm3629] capella_pl_sensor_lpm_power: pl_sensor_lock lock
  66. <6>[ 954.499450] [PS][cm3629] capella_pl_sensor_lpm_power: leave lmp,OK
  67. <6>[ 954.499664] [TP] psensor status 3 -> 0
  68. <6>[ 954.499694] [PS][cm3629] psensor_disable: record_adc[0-4]: 0, 0, 0, 0, 0
  69. <6>[ 954.499694] [PS][cm3629] psensor_disable --0
  70. <6>[ 954.499938] [PS][cm3629] capella_pl_sensor_lpm_power: pl_sensor_lock unlock 4
  71. <6>[ 954.499938] [LS][cm3629] cm3629_late_resume
  72.  
  73. ^C
Advertisement
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!