API tools faq
paste
Guest User

Untitled

a guest
Jun 28th, 2012
109
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 21.96 KB | None | 0 0
raw download clone embed print report
  1. reboot
  2. INITtINIT:
  3. Broadcast message from root (ttyO2) (Fri Dec 9 14:48:22 2011):
  4.  
  5. The system is going down for reboot NOW!
  6. Stopping Matrix GUI application.
  7. Stopping PVR
  8. Stopping telnet daemon.
  9. Stopping Hardware abstraction layer hald
  10. run-parts: /etc/dbus-1/event.d/20hal exited with code 1
  11. Stopping thttpd.
  12. ALSA: Storing mixer settings...
  13. /usr/sbin/alsactl: save_state:1547: Cannot open /etc/asound.state for writing: R
  14. ead-only file system
  15. Deconfiguring network interfaces... done.
  16. Stopping syslogd/klogd: stopped syslogd (pid 1823)
  17. stopped klogd (pid 1825)
  18. done
  19. Unloading HDVICP2 Firmware
  20. FIRMWARE: Memory map bin file not passed
  21. Usage : firmware_loader <Processor Id> <Location of Firmware> <start|stop> [Loca
  22. tion of Mem map bin file]
  23. FIRMWARE: Default memory configuration is used
  24. MemCfg: DCMM (Dynamically Configurable Memory Map) Version : 2.1.1.1
  25. FIRMWARE: Could not open tmp file: -1
  26. FIRMWARE: Memory Configuration status : In Progress
  27. FIRMWARE: 1 stop Successful
  28. Unloading HDVPSS Firmware
  29. ERROR: Module ti81xxfb is in use
  30. ERROR: Module vpss is in use by ti81xxfb
  31. FIRMWARE: Memory map bin file not passed
  32. Usage : firmware_loader <Processor Id> <Location of Firmware> <start|stop> [Loca
  33. tion of Mem map bin file]
  34. FIRMWARE: Default memory configuration is used
  35. MemCfg: DCMM (Dynamically Configurable Memory Map) Version : 2.1.1.1
  36. FIRMWARE: Could not open tmp file: -1
  37. FIRMWARE: Memory Configuration status : In Progress
  38. FIRMWARE: 2 stop Successful
  39. Removed syslink kernel module
  40. Sending all processes the TERM signal...
  41. Sending all processes the KILL signal...
  42. /etc/init.d/rc: /etc/rc6.d/S25save-rtc.sh: line 5: can't create /etc/timestamp:
  43. Read-only file system
  44. Unmounting remote filesystems...
  45. Deactivating swap...
  46. Unmounting local filesystems...
  47. EXT3-fs (mmcblk0p2): error: ext3_remount: Abort forced by user
  48. Rebooting... musb-hdrc musb-hdrc.1: remove, state 1
  49. usb usb2: USB disconnect, address 1
  50. usb 2-1: USB disconnect, address 2
  51. musb-hdrc musb-hdrc.1: USB bus 2 deregistered
  52. musb-hdrc musb-hdrc.0: remove, state 1
  53. usb usb1: USB disconnect, address 1
  54. musb-hdrc musb-hdrc.0: USB bus 1 deregistered
  55. Restarting system.
  56.  
  57.  
  58. U-Boot 2010.06 (Dec 09 2011 - 12:31:16)
  59.  
  60. DRAM: 2 GiB
  61. Using default environment
  62.  
  63. MMC: OMAP SD/MMC: 0
  64. Hit any key to stop autoboot: 0
  65. raise: Signal # 8 caught
  66. reading u-boot.bin
  67.  
  68. 184792 bytes read
  69. ## Starting application at 0x80800000 ...
  70.  
  71.  
  72. U-Boot 2010.06 (Dec 09 2011 - 12:10:47)
  73.  
  74. TI8168-GP rev 1.1
  75.  
  76. ARM clk: 987MHz
  77. DDR clk: 796MHz
  78.  
  79. I2C: ready
  80. DRAM: 2 GiB
  81. NAND: HW ECC Hamming Code selected
  82. No NAND device found!!!
  83. 0 MiB
  84. *** Warning - bad CRC or NAND, using default environment
  85.  
  86. :,;;:;:;;;;;;;;r;;:,;;:;:;;;;;;;;:,;;:;:;;;;;;;;:,;;:;:;;;;;;;;:;;;;;;;;:,;;:;:
  87. ;,;:::;;;;r;;;rssiSiS552X5252525259GX2X9hX9X9XX2325S55252i5:,;;:;:;;;;;;;;:,;;:
  88. ;:;;;;;;;rrssSsS52S22h52299GGAAMHMM#BBH#B#HMM#HMBA&&XX2255S2S5Si:,;;:;:;;;;;;;;
  89. ;:;;r;;rsrrriiXS5S329&A&MH#BMB#A&9XXA252GXiSXX39AAMMMBB&G22S5i2SSiiiisi:,;;:;:;
  90. ;;;;;r;rr2iisiih393HB#B#AA99i22irrrX3X52AGsisss2Xii2299HBMA&X2S5S5iSiisSsi:,;;:
  91. r:r;rrsrsihXSi2&##MHB&Ahh3AGHGA9G9h&#H##@@@##MAMMXXX9SSS29&&HGGX2i5iisiiisisi:,
  92. ;;rrrrsSiiiA&ABH&A9GAGhAhBAMHA9HM@@@@@@@@@@@@@@@@@@@HHhAh2S2SX9&Gh22SSiisiiisii
  93. r:rrssisiS2XM##&h3AGAX&3GG3Ssr5H@M#HM2; ;2X&&&MHMB###GBB#B&XXSSs529XX55iSsisisi
  94. r;rsrisSi2XHAhX99A3XXG&&XS;:,rH#HGhAS @@@@3rs2XBM@@A552&&AHA2XiisSS252SSsisSs
  95. r;issi5S22&&3iSSX292&hXsr;;:;h@&G339&S9@@@@2@MA&9&HB##Xris29ABMAAX2ir;rsSi5iss5
  96. rrsSi2XhG&9GXh399&X99i;;;;;;r#H&293H9X#@@@@@@@B&9GhAH@XrrsrsiXABHB&HG2rr;rrSiSi
  97. ;:rsisS599&AA9XG&3A35r;:::;,;BMh&&2iX5A@@@@@@@&392X5GB2;;;r;iSX393A##A&Xi:::rsi
  98. ;:rss552222X553&XHMhir;;::,:,h#HhGSXhG3#@@@@#AXXS2XAHA;::;;;;ss55XShBA3239r:,;;
  99. r;ii2S5SSi2i53hirsh2srr::,,,,;MMXX359&Ah3h&Si59SX99A#i:,::::;;sri2,.2r;:SGAr;,:
  100. ;:;rrrrssiriXGSi::shs;;;,,,:,,rBBA9h5s5h5iS5isi2SAHB5:,,,:::;rrs5&SrisSX5Srrr:,
  101. ;,r;;;;rsriSSrrrr;;5Xrr;;,:,,.,;9AA2SsisS5323XXXG9&i:.,,::;;r;;;srrrrrr;;:;::::
  102. :,;r;r;rrissrrr;:;::;s;;;;,:,,..,r293h222hXXAAGGGX;:,,,:,:,::;:;::,:,,,,...,,,,
  103. ;,;;;;rrrrrrrrirr;,.,,:::::::,,,,.,;SX&ABAB2hhXir:,,.,,.,,:,,,,..,,,..,..,,,..:
  104. :.:;:;;;:;;;;r;rrs;:.. ,,:::::,:,:,,.::rrsrr;;,,.......,..,....,,,,,,,...,.,,:,
  105. :.:::,::::::;;r;rrr;:.......,.,.,,:::,,...............,,::.,,,,:,::,,:,:,,,:,;:
  106. ,.::,:,,,,,;;;;;;;;r;;::,..............................;;;:;::::,:::::::,:,:,,,
  107. : ,,:,,,,,,,,,,,,,:;rrr;;:;,,,,,,,::,.,.:.,.,;s,:;;;;:;:;;;;;::::,:::,:::,:,:,:
  108. ,.,,,,,,,...,,.,,....................................:,............:,,,:,:,,,,,
  109.  
  110. MMC: OMAP SD/MMC: 0
  111. Net: <ethaddr> not set. Reading from E-fuse
  112. Detected MACID:40:5f:c2:1f:ee:7e
  113. Ethernet PHY: GENERIC @ 0x01
  114. DaVinci EMAC
  115. Hit any key to stop autoboot: 3  2  1  0
  116. raise: Signal # 8 caught
  117. reading boot.scr
  118.  
  119. 282 bytes read
  120. Running bootscript from MMC/SD to set the ENV...
  121. ## Executing script at 80900000
  122. reading uImage
  123.  
  124. 2428376 bytes read
  125. ## Booting kernel from Legacy Image at 80009000 ...
  126. Image Name: Arago/2.6.37-psp04.00.01.13/dm81
  127. Image Type: ARM Linux Kernel Image (uncompressed)
  128. Data Size: 2428312 Bytes = 2.3 MiB
  129. Load Address: 80008000
  130. Entry Point: 80008000
  131. Verifying Checksum ... OK
  132. Loading Kernel Image ... OK
  133. OK
  134.  
  135. Starting kernel ...
  136.  
  137. Uncompressing Linux... done, booting the kernel.
  138. Linux version 2.6.37 (x0029463@swubn01) (gcc version 4.3.3 (Sourcery G++ Lite 20
  139. 09q1-203) ) #1 Fri Dec 9 11:59:08 IST 2011
  140. CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c53c7f
  141. CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache
  142. Machine: ti8168evm
  143. bootconsole [earlycon0] enabled
  144. vram size = 52428800 at 0x0
  145. reserved size = 52428800 at 0x0
  146. FB: Reserving 52428800 bytes SDRAM for VRAM
  147. Memory policy: ECC disabled, Data cache writeback
  148. OMAP chip is TI8168 1.1
  149. Built 1 zonelists in Zone order, mobility grouping on. Total pages: 19712
  150. Kernel command line: console=ttyO2,115200n8 rootwait root=/dev/mmcblk0p2 mem=128
  151. M earlyprintk notifyk.vpssm3_sva=0xBF900000 vram=50M ti81xxfb.vram=0:16M,1:16M,2
  152. :6M
  153. PID hash table entries: 512 (order: -1, 2048 bytes)
  154. Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
  155. Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
  156. Memory: 78MB = 78MB total
  157. Memory: 73472k/73472k available, 57600k reserved, 0K highmem
  158. Virtual kernel memory layout:
  159. vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  160. fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
  161. DMA : 0xffc00000 - 0xffe00000 ( 2 MB)
  162. vmalloc : 0xc8800000 - 0xf8000000 ( 760 MB)
  163. lowmem : 0xc0000000 - 0xc8000000 ( 128 MB)
  164. pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
  165. modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
  166. .init : 0xc0008000 - 0xc003a000 ( 200 kB)
  167. .text : 0xc003a000 - 0xc049c000 (4488 kB)
  168. .data : 0xc049c000 - 0xc04e36c0 ( 286 kB)
  169. SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
  170. NR_IRQS:407
  171. IRQ: Found an INTC at 0xfa200000 (revision 5.0) with 128 interrupts
  172. Total of 128 interrupts on 1 active controller
  173. GPMC revision 6.0
  174. Trying to install interrupt handler for IRQ400
  175. Trying to install interrupt handler for IRQ401
  176. Trying to install interrupt handler for IRQ402
  177. Trying to install interrupt handler for IRQ403
  178. Trying to install interrupt handler for IRQ404
  179. Trying to install interrupt handler for IRQ405
  180. Trying to install interrupt handler for IRQ406
  181. Trying to install type control for IRQ407
  182. Trying to set irq flags for IRQ407
  183. OMAP clockevent source: GPTIMER1 at 27000000 Hz
  184. Console: colour dummy device 80x30
  185. Calibrating delay loop... 986.31 BogoMIPS (lpj=4931584)
  186. pid_max: default: 32768 minimum: 301
  187. Security Framework initialized
  188. Mount-cache hash table entries: 512
  189. CPU: Testing write buffer coherency: ok
  190. devtmpfs: initialized
  191. omap_voltage_early_init: voltage driver support not added
  192. regulator: core version 0.5
  193. regulator: dummy:
  194. NET: Registered protocol family 16
  195. OMAP GPIO hardware version 0.1
  196. OMAP GPIO hardware version 0.1
  197. omap_mux_init: Add partition: #1: core, flags: 0
  198. _omap_mux_get_by_name: Could not find signal i2c2_scl.i2c2_scl
  199. _omap_mux_get_by_name: Could not find signal i2c2_sda.i2c2_sda
  200. NOR: Can't request GPMC CS
  201. registered ti816x_vpss device
  202. registered ti816x_gpio_vr device
  203. registered TI816x on-chip HDMI device
  204. registered ti816x_sr device
  205. registered ti81xx_vidout device
  206. pm_dbg_init: only OMAP3 supported
  207. ti81xx_pcie: Invoking PCI BIOS...
  208. ti81xx_pcie: Setting up Host Controller...
  209. ti81xx_pcie: Register base mapped @0xc8820000
  210. ti81xx_pcie: Starting PCI scan...
  211. PCI: bus0: Fast back to back transfers enabled
  212. bio: create slab <bio-0> at 0
  213. regulator: VFB: 800 <--> 1025 mV at 1010 mV
  214. vgaarb: loaded
  215. SCSI subsystem initialized
  216. usbcore: registered new interface driver usbfs
  217. usbcore: registered new interface driver hub
  218. usbcore: registered new device driver usb
  219. registerd cppi-dma Intr @ IRQ 17
  220. Cppi41 Init Done
  221. omap_i2c omap_i2c.1: bus 1 rev4.0 at 100 kHz
  222. omap_i2c omap_i2c.2: bus 2 rev4.0 at 100 kHz
  223. Advanced Linux Sound Architecture Driver Version 1.0.23.
  224. Switching to clocksource gp timer
  225. musb-hdrc: version 6.0, host, debug=0
  226. musb-hdrc musb-hdrc.0: dma type: dma-cppi41
  227. musb-hdrc: kernel must blacklist external hubs
  228. musb-hdrc musb-hdrc.0: MUSB HDRC host driver
  229. musb-hdrc musb-hdrc.0: new USB bus registered, assigned bus number 1
  230. usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  231. usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  232. usb usb1: Product: MUSB HDRC host driver
  233. usb usb1: Manufacturer: Linux 2.6.37 musb-hcd
  234. usb usb1: SerialNumber: musb-hdrc.0
  235. hub 1-0:1.0: USB hub found
  236. hub 1-0:1.0: 1 port detected
  237. musb-hdrc musb-hdrc.0: USB Host mode controller at c881e000 using DMA, IRQ 18
  238. musb-hdrc musb-hdrc.1: dma type: dma-cppi41
  239. musb-hdrc: kernel must blacklist external hubs
  240. musb-hdrc musb-hdrc.1: MUSB HDRC host driver
  241. musb-hdrc musb-hdrc.1: new USB bus registered, assigned bus number 2
  242. usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
  243. usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  244. usb usb2: Product: MUSB HDRC host driver
  245. usb usb2: Manufacturer: Linux 2.6.37 musb-hcd
  246. usb usb2: SerialNumber: musb-hdrc.1
  247. hub 2-0:1.0: USB hub found
  248. hub 2-0:1.0: 1 port detected
  249. musb-hdrc musb-hdrc.1: USB Host mode controller at c8826800 using DMA, IRQ 19
  250. NET: Registered protocol family 2
  251. IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
  252. TCP established hash table entries: 4096 (order: 3, 32768 bytes)
  253. TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
  254. TCP: Hash tables configured (established 4096 bind 4096)
  255. TCP reno registered
  256. UDP hash table entries: 256 (order: 0, 4096 bytes)
  257. UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
  258. NET: Registered protocol family 1
  259. RPC: Registered udp transport module.
  260. RPC: Registered tcp transport module.
  261. RPC: Registered tcp NFSv4.1 backchannel transport module.
  262. NetWinder Floating Point Emulator V0.97 (double precision)
  263. PMU: registered new PMU device of type 0
  264. omap-iommu omap-iommu.0: ducati registered
  265. omap-iommu omap-iommu.1: sys registered
  266. JFFS2 version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
  267. msgmni has been set to 143
  268. io scheduler noop registered
  269. io scheduler deadline registered
  270. io scheduler cfq registered (default)
  271. Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
  272. omap_uart.0: ttyO0 at MMIO 0x48020000 (irq = 72) is a OMAP UART0
  273. omap_uart.1: ttyO1 at MMIO 0x48022000 (irq = 73) is a OMAP UART1
  274. omap_uart.2: ttyO2 at MMIO 0x48024000 (irq = 74) is a OMAP UART2
  275. console [ttyO2] enabled, bootconsole disabled
  276. console [ttyO2] enabled, bootconsole disabled
  277. brd: module loaded
  278. loop: module loaded
  279. ahci ahci.0: forcing PORTS_IMPL to 0x3
  280. ahci ahci.0: AHCI 0001.0100 32 slots 2 ports 3 Gbps 0x3 impl platform mode
  281. ahci ahci.0: flags: ncq sntf pm led clo only pmp pio slum part ccc
  282. scsi0 : ahci_platform
  283. scsi1 : ahci_platform
  284. ata1: SATA max UDMA/133 mmio [mem 0x4a140000-0x4a150fff] port 0x100 irq 16
  285. ata2: SATA max UDMA/133 mmio [mem 0x4a140000-0x4a150fff] port 0x180 irq 16
  286. m25p80 spi1.0: found m25p05-nonjedec, expected w25x32
  287. m25p80 spi1.0: m25p05-nonjedec (64 Kbytes)
  288. Creating 4 MTD partitions on "spi_flash":
  289. 0x000000000000-0x000000040000 : "U-Boot"
  290. mtd: partition "U-Boot" extends beyond the end of device "spi_flash" -- size tru
  291. ncated to 0x10000
  292. 0x000000010000-0x000000012000 : "U-Boot Env"
  293. mtd: partition "U-Boot Env" is out of reach -- disabled
  294. 0x000000000000-0x000000280000 : "Kernel"
  295. mtd: partition "Kernel" extends beyond the end of device "spi_flash" -- size tru
  296. ncated to 0x10000
  297. 0x000000010000-0x000000010000 : "File System"
  298. mtd: partition "File System" is out of reach -- disabled
  299. omap2-nand driver initializing
  300. No NAND device found.
  301. No NAND device found.
  302. davinci_mdio davinci_mdio.0: davinci mdio revision 1.6
  303. davinci_mdio davinci_mdio.0: detected phy mask fffffff9
  304. davinci_mdio.0: probed
  305. davinci_mdio davinci_mdio.0: phy[1]: device 0:01, driver unknown
  306. davinci_mdio davinci_mdio.0: phy[2]: device 0:02, driver unknown
  307. usbcore: registered new interface driver cdc_ether
  308. usbcore: registered new interface driver dm9601
  309. Initializing USB Mass Storage driver...
  310. usbcore: registered new interface driver usb-storage
  311. USB Mass Storage support registered.
  312. mice: PS/2 mouse device common for all mice
  313. omap_rtc omap_rtc: rtc core: registered omap_rtc as rtc0
  314. i2c /dev entries driver
  315. Linux video capture interface: v2.00
  316. usbcore: registered new interface driver uvcvideo
  317. USB Video Class driver (v1.0.0)
  318. OMAP Watchdog Timer Rev 0x00: initial timeout 60 sec
  319. usbcore: registered new interface driver usbhid
  320. usbhid: USB HID core driver
  321. notify_init : notify drivercreated for remote proc id 2 at physical Address 0x
  322. bf900000
  323. usbcore: registered new interface driver snd-usb-audio
  324. asoc: tlv320aic3x-hifi <-> davinci-mcasp.2 mapping ok
  325. ALSA device list:
  326. #0: TI81XX EVM
  327. TCP cubic registered
  328. NET: Registered protocol family 17
  329. VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
  330. omap_voltage_late_init: Voltage driver support not added
  331. Power Management for TI81XX.
  332. smartreflex smartreflex: Driver initialized
  333. omap_rtc omap_rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800)
  334. usb 2-1: new low speed USB device using musb-hdrc and address 2
  335. mmc0: new high speed SDHC card at address b368
  336. mmcblk0: mmc0:b368 SD 15.4 GiB
  337. mmcblk0: p1 p2
  338. ata1: SATA link down (SStatus 0 SControl 300)
  339. ata2: SATA link down (SStatus 0 SControl 300)
  340. EXT3-fs: barriers not enabled
  341. usb 2-1: New USB device found, idVendor=13ee, idProduct=0003
  342. usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  343. usb 2-1: Product: Optical Mouse
  344. usb 2-1: Manufacturer: MosArt
  345. input: MosArt Optical Mouse as /devices/platform/omap/ti81xx-usbss/musb-hdrc.1/u
  346. sb2/2-1/2-1:1.0/input/input0
  347. generic-usb 0003:13EE:0003.0001: input: USB HID v1.10 Mouse [MosArt Optical Mous
  348. e] on usb-musb-hdrc.1-1/input0
  349. mmcblk0: error -110 transferring data, sector 18232537, nr 16, card status 0xc00
  350. end_request: I/O error, dev mmcblk0, sector 18232538
  351. Buffer I/O error on device mmcblk0p2, logical block 2260994
  352. lost page write due to I/O error on mmcblk0p2
  353. end_request: I/O error, dev mmcblk0, sector 18232545
  354. Buffer I/O error on device mmcblk0p2, logical block 2260995
  355. lost page write due to I/O error on mmcblk0p2
  356. mmcblk0: error -110 sending read/write command, response 0x900, card status 0xe0
  357. 0
  358. mmcblk0: error -110 transferring data, sector 144585, nr 16, card status 0xc00
  359. end_request: I/O error, dev mmcblk0, sector 144586
  360. Buffer I/O error on device mmcblk0p2, logical block 0
  361. lost page write due to I/O error on mmcblk0p2
  362. end_request: I/O error, dev mmcblk0, sector 144593
  363. Buffer I/O error on device mmcblk0p2, logical block 1
  364. lost page write due to I/O error on mmcblk0p2
  365. mmcblk0: error -110 sending read/write command, response 0x900, card status 0xe0
  366. 0
  367. mmcblk0: error -110 transferring data, sector 3028185, nr 16, card status 0xc00
  368. end_request: I/O error, dev mmcblk0, sector 3028186
  369. Buffer I/O error on device mmcblk0p2, logical block 360450
  370. lost page write due to I/O error on mmcblk0p2
  371. end_request: I/O error, dev mmcblk0, sector 3028193
  372. Buffer I/O error on device mmcblk0p2, logical block 360451
  373. lost page write due to I/O error on mmcblk0p2
  374. mmcblk0: error -110 transferring data, sector 3486921, nr 8, card status 0xc00
  375. end_request: I/O error, dev mmcblk0, sector 3486922
  376. Buffer I/O error on device mmcblk0p2, logical block 417792
  377. lost page write due to I/O error on mmcblk0p2
  378. mmcblk0: error -110 sending read/write command, response 0x900, card status 0xe0
  379. 0
  380. mmcblk0: error -110 transferring data, sector 5649609, nr 72, card status 0xc00
  381. end_request: I/O error, dev mmcblk0, sector 5649610
  382. Buffer I/O error on device mmcblk0p2, logical block 688128
  383. lost page write due to I/O error on mmcblk0p2
  384. end_request: I/O error, dev mmcblk0, sector 5649617
  385. Buffer I/O error on device mmcblk0p2, logical block 688129
  386. lost page write due to I/O error on mmcblk0p2
  387. end_request: I/O error, dev mmcblk0, sector 5649625
  388. Buffer I/O error on device mmcblk0p2, logical block 688130
  389. lost page write due to I/O error on mmcblk0p2
  390. end_request: I/O error, dev mmcblk0, sector 5649633
  391. end_request: I/O error, dev mmcblk0, sector 5649641
  392. end_request: I/O error, dev mmcblk0, sector 5649649
  393. end_request: I/O error, dev mmcblk0, sector 5649657
  394. end_request: I/O error, dev mmcblk0, sector 5649665
  395. end_request: I/O error, dev mmcblk0, sector 5649673
  396. mmcblk0: error -110 transferring data, sector 5849729, nr 8, card status 0xc00
  397. end_request: I/O error, dev mmcblk0, sector 5849730
  398. mmcblk0: error -110 sending read/write command, response 0x900, card status 0xe0
  399. 0
  400. mmcblk0: error -110 transferring data, sector 13776073, nr 40, card status 0xc00
  401. end_request: I/O error, dev mmcblk0, sector 13776074
  402. quiet_error: 7 callbacks suppressed
  403. Buffer I/O error on device mmcblk0p2, logical block 1703936
  404. lost page write due to I/O error on mmcblk0p2
  405. end_request: I/O error, dev mmcblk0, sector 13776081
  406. Buffer I/O error on device mmcblk0p2, logical block 1703937
  407. lost page write due to I/O error on mmcblk0p2
  408. end_request: I/O error, dev mmcblk0, sector 13776089
  409. Buffer I/O error on device mmcblk0p2, logical block 1703938
  410. lost page write due to I/O error on mmcblk0p2
  411. end_request: I/O error, dev mmcblk0, sector 13776097
  412. Buffer I/O error on device mmcblk0p2, logical block 1703939
  413. lost page write due to I/O error on mmcblk0p2
  414. end_request: I/O error, dev mmcblk0, sector 13776105
  415. Buffer I/O error on device mmcblk0p2, logical block 1703940
  416. lost page write due to I/O error on mmcblk0p2
  417. mmcblk0: error -110 sending read/write command, response 0x900, card status 0xe0
  418. 0
  419. mmcblk0: error -110 transferring data, sector 13956297, nr 16, card status 0xc00
  420. end_request: I/O error, dev mmcblk0, sector 13956298
  421. Buffer I/O error on device mmcblk0p2, logical block 1726464
  422. lost page write due to I/O error on mmcblk0p2
  423. end_request: I/O error, dev mmcblk0, sector 13956305
  424. Buffer I/O error on device mmcblk0p2, logical block 1726465
  425. lost page write due to I/O error on mmcblk0p2
  426. mmcblk0: error -110 sending read/write command, response 0x900, card status 0xe0
  427. 0
  428. mmcblk0: error -110 transferring data, sector 13972713, nr 8, card status 0xc00
  429. end_request: I/O error, dev mmcblk0, sector 13972714
  430. Buffer I/O error on device mmcblk0p2, logical block 1728516
  431. lost page write due to I/O error on mmcblk0p2
  432. mmcblk0: error -110 transferring data, sector 28423369, nr 8, card status 0xc00
  433. end_request: I/O error, dev mmcblk0, sector 28423370
  434. Buffer I/O error on device mmcblk0p2, logical block 3534848
  435. lost page write due to I/O error on mmcblk0p2
  436. mmcblk0: error -110 sending read/write command, response 0x900, card status 0xe0
  437. 0
  438. mmcblk0: error -110 transferring data, sector 31864009, nr 56, card status 0xc00
  439. end_request: I/O error, dev mmcblk0, sector 31864010
  440. Buffer I/O error on device mmcblk0p2, logical block 3964928
  441. lost page write due to I/O error on mmcblk0p2
  442. end_request: I/O error, dev mmcblk0, sector 31864017
  443. Buffer I/O error on device mmcblk0p2, logical block 3964929
  444. lost page write due to I/O error on mmcblk0p2
  445. end_request: I/O error, dev mmcblk0, sector 31864025
  446. Buffer I/O error on device mmcblk0p2, logical block 3964930
  447. lost page write due to I/O error on mmcblk0p2
  448. end_request: I/O error, dev mmcblk0, sector 31864033
  449. Buffer I/O error on device mmcblk0p2, logical block 3964931
  450. lost page write due to I/O error on mmcblk0p2
  451. end_request: I/O error, dev mmcblk0, sector 31864041
  452. Buffer I/O error on device mmcblk0p2, logical block 3964932
  453. lost page write due to I/O error on mmcblk0p2
  454. end_request: I/O error, dev mmcblk0, sector 31864049
  455. Buffer I/O error on device mmcblk0p2, logical block 3964933
  456. lost page write due to I/O error on mmcblk0p2
  457. end_request: I/O error, dev mmcblk0, sector 31864057
  458. Buffer I/O error on device mmcblk0p2, logical block 3964934
  459. lost page write due to I/O error on mmcblk0p2
  460. JBD: recovery failed
  461. EXT3-fs (mmcblk0p2): error loading journal
  462. EXT2-fs (mmcblk0p2): error: couldn't mount because of unsupported optional featu
  463. res (4)
  464. List of all partitions:
  465. 1f00 64 mtdblock0 (driver?)
  466. 1f02 64 mtdblock2 (driver?)
  467. b300 16186368 mmcblk0 driver: mmcblk
  468. b301 72261 mmcblk0p1 00000000-0000-0000-0000-000000000mmcblk0p1
  469. b302 16113195 mmcblk0p2 00000000-0000-0000-0000-000000000mmcblk0p2
  470. No filesystem could mount root, tried: ext3 ext2 vfat msdos iso9660
  471. Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(179,2)
  472. Backtrace:
  473. [<c0048b58>] (dump_backtrace+0x0/0x110) from [<c036b8d8>] (dump_stack+0x18/0x1c)
  474. r7:c4814000 r6:00000000 r5:c002d984 r4:c04e3e90
  475. [<c036b8c0>] (dump_stack+0x0/0x1c) from [<c036b93c>] (panic+0x60/0x17c)
  476. [<c036b8dc>] (panic+0x0/0x17c) from [<c0009258>] (mount_block_root+0x1e0/0x220)
  477. r3:00000000 r2:00000020 r1:c4825f58 r0:c0422b7c
  478. [<c0009078>] (mount_block_root+0x0/0x220) from [<c0009344>] (mount_root+0xac/0xc
  479. c)
  480. [<c0009298>] (mount_root+0x0/0xcc) from [<c00094d4>] (prepare_namespace+0x170/0x
  481. 1d4)
  482. r4:c04e3724
  483. [<c0009364>] (prepare_namespace+0x0/0x1d4) from [<c0008784>] (kernel_init+0x114/
  484. 0x154)
  485. r5:c0008670 r4:c04e36c0
  486. [<c0008670>] (kernel_init+0x0/0x154) from [<c006ef40>] (do_exit+0x0/0x5e4)
  487. r5:c0008670 r4:00000000
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!