API tools faq
paste
Advertisement
Guest User

Untitled

a guest
Sep 30th, 2013
94
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 11.05 KB | None | 0 0
raw download clone embed print report
  1. [ 0.000000] Booting Linux on physical CPU 0x0
  2. [ 0.000000] Linux version 3.12.0-rc2-00034-g36e0a6c (nmenon@kahuna) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #38 SMP Mon Sep 30 09:34:29 CDT 2013
  3. [ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c53c7d
  4. [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
  5. [ 0.000000] Machine: Generic AM33XX (Flattened Device Tree), model: TI AM335x BeagleBone
  6. [ 0.000000] cma: CMA: reserved 16 MiB at 9e800000
  7. [ 0.000000] Memory policy: ECC disabled, Data cache writeback
  8. [ 0.000000] CPU: All CPU(s) started in SVC mode.
  9. [ 0.000000] AM335X ES2.0 (neon )
  10. [ 0.000000] PERCPU: Embedded 9 pages/cpu @c1395000 s14016 r8192 d14656 u36864
  11. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129792
  12. [ 0.000000] Kernel command line: console=ttyO0,115200n8 root=/dev/mmcblk0p2 rw rootfstype=ext3 rootwait earlyprintk
  13. [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
  14. [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
  15. [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
  16. [ 0.000000] Memory: 488128K/523264K available (5391K kernel code, 661K rwdata, 2088K rodata, 389K init, 5523K bss, 35136K reserved, 0K highmem)
  17. [ 0.000000] Virtual kernel memory layout:
  18. [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  19. [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
  20. [ 0.000000] vmalloc : 0xe0800000 - 0xff000000 ( 488 MB)
  21. [ 0.000000] lowmem : 0xc0000000 - 0xe0000000 ( 512 MB)
  22. [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
  23. [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
  24. [ 0.000000] .text : 0xc0008000 - 0xc0756144 (7481 kB)
  25. [ 0.000000] .init : 0xc0757000 - 0xc07b86c0 ( 390 kB)
  26. [ 0.000000] .data : 0xc07ba000 - 0xc085f728 ( 662 kB)
  27. [ 0.000000] .bss : 0xc085f728 - 0xc0dc44e8 (5524 kB)
  28. [ 0.000000] Hierarchical RCU implementation.
  29. [ 0.000000] RCU restricting CPUs from NR_CPUS=2 to nr_cpu_ids=1.
  30. [ 0.000000] NR_IRQS:16 nr_irqs:16 16
  31. [ 0.000000] IRQ: Found an INTC at 0xfa200000 (revision 5.0) with 128 interrupts
  32. [ 0.000000] Total of 128 interrupts on 1 active controller
  33. [ 0.000000] OMAP clockevent source: timer2 at 24000000 Hz
  34. [ 0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms
  35. [ 0.000000] OMAP clocksource: timer1 at 24000000 Hz
  36. [ 0.000000] Console: colour dummy device 80x30
  37. [ 0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
  38. [ 0.000000] ... MAX_LOCKDEP_SUBCLASSES: 8
  39. [ 0.000000] ... MAX_LOCK_DEPTH: 48
  40. [ 0.000000] ... MAX_LOCKDEP_KEYS: 8191
  41. [ 0.000000] ... CLASSHASH_SIZE: 4096
  42. [ 0.000000] ... MAX_LOCKDEP_ENTRIES: 16384
  43. [ 0.000000] ... MAX_LOCKDEP_CHAINS: 32768
  44. [ 0.000000] ... CHAINHASH_SIZE: 16384
  45. [ 0.000000] memory used by lock dependency info: 3695 kB
  46. [ 0.000000] per task-struct memory footprint: 1152 bytes
  47. [ 0.001474] Calibrating delay loop... 363.72 BogoMIPS (lpj=1818624)
  48. [ 0.109399] pid_max: default: 32768 minimum: 301
  49. [ 0.110023] Security Framework initialized
  50. [ 0.110216] Mount-cache hash table entries: 512
  51. [ 0.129033] CPU: Testing write buffer coherency: ok
  52. [ 0.131025] CPU0: thread -1, cpu 0, socket -1, mpidr 0
  53. [ 0.131121] Setting up static identity map for 0xc051ccf8 - 0xc051cd68
  54. [ 0.135266] Brought up 1 CPUs
  55. [ 0.135293] SMP: Total of 1 processors activated.
  56. [ 0.135309] CPU: All CPU(s) started in SVC mode.
  57. [ 0.139348] devtmpfs: initialized
  58. [ 0.154038] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
  59. [ 0.163592] omap_hwmod: debugss: _wait_target_disable failed
  60. [ 0.227267] pinctrl core: initialized pinctrl subsystem
  61. [ 0.233605] regulator-dummy: no parameters
  62. [ 0.242059] NET: Registered protocol family 16
  63. [ 0.251242] DMA: preallocated 256 KiB pool for atomic coherent allocations
  64. [ 0.277174] platform 49000000.edma: alias fck already exists
  65. [ 0.277220] platform 49000000.edma: alias fck already exists
  66. [ 0.277248] platform 49000000.edma: alias fck already exists
  67. [ 0.283966] OMAP GPIO hardware version 0.1
  68. [ 0.316146] No ATAGs?
  69. [ 0.316180] hw-breakpoint: debug architecture 0x4 unsupported.
  70. [ 0.406222] bio: create slab <bio-0> at 0
  71. [ 0.462938] edma-dma-engine edma-dma-engine.0: TI EDMA DMA engine driver
  72. [ 0.465638] vmmcsd_fixed: 3300 mV
  73. [ 0.476445] SCSI subsystem initialized
  74. [ 0.479369] usbcore: registered new interface driver usbfs
  75. [ 0.480342] usbcore: registered new interface driver hub
  76. [ 0.481406] usbcore: registered new device driver usb
  77. [ 0.485545] omap_i2c 44e0b000.i2c: could not find pctldev for node /pinmux@44e10800/pinmux_i2c0_pins, deferring probe
  78. [ 0.485615] platform 44e0b000.i2c: Driver omap_i2c requests probe deferral
  79. [ 0.497082] Switched to clocksource timer1
  80. [ 0.705634] NET: Registered protocol family 2
  81. [ 0.708627] TCP established hash table entries: 4096 (order: 3, 32768 bytes)
  82. [ 0.708980] TCP bind hash table entries: 4096 (order: 5, 147456 bytes)
  83. [ 0.711454] TCP: Hash tables configured (established 4096 bind 4096)
  84. [ 0.711740] TCP: reno registered
  85. [ 0.711781] UDP hash table entries: 256 (order: 2, 20480 bytes)
  86. [ 0.712125] UDP-Lite hash table entries: 256 (order: 2, 20480 bytes)
  87. [ 0.714024] NET: Registered protocol family 1
  88. [ 0.716307] RPC: Registered named UNIX socket transport module.
  89. [ 0.716338] RPC: Registered udp transport module.
  90. [ 0.716355] RPC: Registered tcp transport module.
  91. [ 0.716372] RPC: Registered tcp NFSv4.1 backchannel transport module.
  92. [ 0.717782] NetWinder Floating Point Emulator V0.97 (double precision)
  93. [ 0.718072] hw perfevents: enabled with ARMv7 Cortex-A8 PMU driver, 5 counters available
  94. [ 0.970048] VFS: Disk quotas dquot_6.5.2
  95. [ 0.970386] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  96. [ 0.973744] NFS: Registering the id_resolver key type
  97. [ 0.974368] Key type id_resolver registered
  98. [ 0.974398] Key type id_legacy registered
  99. [ 0.974567] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
  100. [ 0.975244] msgmni has been set to 985
  101. [ 0.980526] io scheduler noop registered
  102. [ 0.980563] io scheduler deadline registered
  103. [ 0.980657] io scheduler cfq registered (default)
  104. [ 0.983519] pinctrl-single 44e10800.pinmux: 142 pins at pa f9e10800 size 568
  105. [ 0.989367] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
  106. [ 1.000324] 44e09000.serial: ttyO0 at MMIO 0x44e09000 (irq = 88, base_baud = 3000000) is a OMAP UART0
  107. [ 1.631114] console [ttyO0] enabled
  108. [ 1.678749] brd: module loaded
  109. [ 1.707790] loop: module loaded
  110. [ 1.721957] mtdoops: mtd device (mtddev=name/number) must be supplied
  111. [ 1.740673] usbcore: registered new interface driver asix
  112. [ 1.747202] usbcore: registered new interface driver ax88179_178a
  113. [ 1.754239] usbcore: registered new interface driver cdc_ether
  114. [ 1.761675] usbcore: registered new interface driver r815x
  115. [ 1.768310] usbcore: registered new interface driver smsc95xx
  116. [ 1.774959] usbcore: registered new interface driver net1080
  117. [ 1.781857] usbcore: registered new interface driver cdc_subset
  118. [ 1.788994] usbcore: registered new interface driver zaurus
  119. [ 1.795580] usbcore: registered new interface driver cdc_ncm
  120. [ 1.804535] usbcore: registered new interface driver cdc_wdm
  121. [ 1.811443] usbcore: registered new interface driver usb-storage
  122. [ 1.818871] usbcore: registered new interface driver usbtest
  123. [ 1.829454] mousedev: PS/2 mouse device common for all mice
  124. [ 1.843047] omap_rtc 44e3e000.rtc: rtc core: registered 44e3e000.rtc as rtc0
  125. [ 1.850859] 44e3e000.rtc: already running
  126. [ 1.857437] i2c /dev entries driver
  127. [ 1.861759] Driver for 1-wire Dallas network protocol.
  128. [ 1.874094] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec
  129. [ 1.886681] edma-dma-engine edma-dma-engine.0: allocated channel for 0:25
  130. [ 1.894160] edma-dma-engine edma-dma-engine.0: allocated channel for 0:24
  131. [ 1.937903] edma-dma-engine edma-dma-engine.0: allocated channel for 0:3
  132. [ 1.945002] edma-dma-engine edma-dma-engine.0: allocated channel for 0:2
  133. [ 2.009795] ledtrig-cpu: registered to indicate activity on CPUs
  134. [ 2.016432] mmc0: host does not support reading read-only switch. assuming write-enable.
  135. [ 2.027924] usbcore: registered new interface driver usbhid
  136. [ 2.033824] usbhid: USB HID core driver
  137. [ 2.038759] mmc0: new high speed SD card at address fdd9
  138. [ 2.049576] mmcblk0: mmc0:fdd9 SD02G 1.87 GiB
  139. [ 2.063531] mmcblk0: p1 p2
  140. [ 2.068536] oprofile: using arm/armv7
  141. [ 2.073388] TCP: cubic registered
  142. [ 2.076892] Initializing XFRM netlink socket
  143. [ 2.082045] NET: Registered protocol family 17
  144. [ 2.086847] NET: Registered protocol family 15
  145. [ 2.092105] Key type dns_resolver registered
  146. [ 2.096755] ThumbEE CPU extension supported.
  147. [ 2.134058] DCDC1: at 1500 mV
  148. [ 2.140963] vdd_mpu: 925 <--> 1325 mV at 1100 mV
  149. [ 2.149167] vdd_core: 925 <--> 1150 mV at 1100 mV
  150. [ 2.157224] LDO1: at 1800 mV
  151. [ 2.163074] LDO2: at 3300 mV
  152. [ 2.170340] LDO3: 1800 mV
  153. [ 2.176040] LDO4: at 3300 mV
  154. [ 2.182424] tps65217 0-0024: TPS65217 ID 0xe version 1.2
  155. [ 2.188357] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz
  156. [ 2.257044] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6
  157. [ 2.263487] davinci_mdio 4a101000.mdio: detected phy mask fffffffe
  158. [ 2.273745] libphy: 4a101000.mdio: probed
  159. [ 2.278143] davinci_mdio 4a101000.mdio: phy[0]: device 4a101000.mdio:00, driver SMSC LAN8710/LAN8720
  160. [ 2.288400] Random MACID = fa:7c:8d:ee:1c:81
  161. [ 2.299750] omap_rtc 44e3e000.rtc: setting system clock to 2000-01-01 00:27:46 UTC (946686466)
  162. [ 3.039459] kjournald starting. Commit interval 5 seconds
  163. [ 3.136847] EXT3-fs (mmcblk0p2): using internal journal
  164. [ 3.233030] EXT3-fs (mmcblk0p2): recovery complete
  165. [ 3.238194] EXT3-fs (mmcblk0p2): mounted filesystem with ordered data mode
  166. [ 3.245661] VFS: Mounted root (ext3 filesystem) on device 179:2.
  167. [ 3.255932] devtmpfs: mounted
  168. [ 3.260195] Freeing unused kernel memory: 388K (c0757000 - c07b8000)
  169. Mounting proc : OK
  170. Mounting sysfs : OK
  171. Mounting devtmpfs:mount: mounting none on /dev failed: Device or resource busy
  172. boot mounted: OK
  173. /dev/ttyO0 linked to /dev/tty-bd - using as console
  174.  
  175. ******************************************
  176. Starting System Init for GenericAM33XX(FlattenedDeviceTree)
  177. Release: X.x
  178. Kernel: Linux GenericAM33XX(FlattenedDeviceTree) 3.12.0-rc2-00034-g36e0a6c #38 SMP Mon Sep 30 09:34:29 CDT 2013 armv7l GNU/Linux
  179. ******************************************
  180. Saving kernel ring buffer : OK
  181. Mounting devpts : OK
  182. Setting up networking
  183. Configuring lo : OK
  184. Starting syslogd : OK
  185. Starting klogd : OK
  186. Mounting filesystems : OK
  187. mount: mounting none on /proc/bus/usb/ failed: No such file or directory
  188.  
  189. Please press Enter to activate this console.
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!