Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- [root@freenas] ~# dmesg
- Copyright (c) 1992-2013 The FreeBSD Project.
- Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
- The Regents of the University of California. All rights reserved.
- FreeBSD is a registered trademark of The FreeBSD Foundation.
- FreeBSD 9.2-RELEASE-p3 #0 r262572+38751c8: Thu Mar 20 21:13:02 PDT 2014
- root@build.ixsystems.com:/tank/home/jkh/9.2.1-BRANCH/freenas/os-base/amd64/t ank/home/jkh/9.2.1-BRANCH/freenas/FreeBSD/src/sys/FREENAS.amd64 amd64
- gcc version 4.2.1 20070831 patched [FreeBSD]
- CPU: AMD E-350D APU with Radeon(tm) HD Graphics (1600.03-MHz K8-class CPU)
- Origin = "AuthenticAMD" Id = 0x500f20 Family = 0x14 Model = 0x2 Stepping = 0
- Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,C MOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
- Features2=0x802209<SSE3,MON,SSSE3,CX16,POPCNT>
- AMD Features=0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM>
- AMD Features2=0x35ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,IBS,SKINI T,WDT>
- TSC: P-state invariant, performance statistics
- real memory = 8589934592 (8192 MB)
- avail memory = 8191746048 (7812 MB)
- Event timer "LAPIC" quality 400
- ACPI APIC Table: <ALASKA A M I>
- FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
- FreeBSD/SMP: 1 package(s) x 2 core(s)
- cpu0 (BSP): APIC ID: 0
- cpu1 (AP): APIC ID: 1
- WARNING: VIMAGE (virtualized network stack) is a highly experimental feature.
- ACPI Warning: Optional field Pm2ControlBlock has zero address or length: 0x00000 00000000000/0x1 (20110527/tbfadt-586)
- ioapic0: Changing APIC ID to 0
- ioapic0 <Version 2.1> irqs 0-23 on motherboard
- kbd1 at kbdmux0
- cryptosoft0: <software crypto> on motherboard
- aesni0: No AESNI support.
- padlock0: No ACE support.
- acpi0: <ALASKA A M I> on motherboard
- acpi0: Power Button (fixed)
- cpu0: <ACPI CPU> on acpi0
- cpu1: <ACPI CPU> on acpi0
- attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
- Timecounter "i8254" frequency 1193182 Hz quality 0
- Event timer "i8254" frequency 1193182 Hz quality 100
- atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
- Event timer "RTC" frequency 32768 Hz quality 0
- hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
- Timecounter "HPET" frequency 14318180 Hz quality 950
- Event timer "HPET" frequency 14318180 Hz quality 550
- Event timer "HPET1" frequency 14318180 Hz quality 450
- Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
- acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
- pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
- pci0: <ACPI PCI bus> on pcib0
- vgapci0: <VGA-compatible display> port 0xf000-0xf0ff mem 0xfc000000-0xfdffffff,0 xfeb00000-0xfeb3ffff irq 18 at device 1.0 on pci0
- pcib1: <ACPI PCI-PCI bridge> irq 16 at device 4.0 on pci0
- pci1: <ACPI PCI bus> on pcib1
- em0: <Intel(R) PRO/1000 Network Connection 7.3.8> port 0xe000-0xe01f mem 0xfeac0 000-0xfeadffff,0xfea00000-0xfea7ffff,0xfeae0000-0xfeae3fff irq 16 at device 0.0 on pci1
- em0: Using MSIX interrupts with 3 vectors
- em0: Ethernet address: 68:05:ca:19:9d:8b
- ahci0: <ATI IXP700 AHCI SATA controller> port 0xf140-0xf147,0xf130-0xf133,0xf120 -0xf127,0xf110-0xf113,0xf100-0xf10f mem 0xfeb47000-0xfeb473ff irq 19 at device 1 7.0 on pci0
- ahci0: AHCI v1.20 with 6 6Gbps ports, Port Multiplier supported
- ahcich0: <AHCI channel> at channel 0 on ahci0
- ahcich1: <AHCI channel> at channel 1 on ahci0
- ahcich2: <AHCI channel> at channel 2 on ahci0
- ahcich3: <AHCI channel> at channel 3 on ahci0
- ahcich4: <AHCI channel> at channel 4 on ahci0
- ahcich5: <AHCI channel> at channel 5 on ahci0
- ohci0: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfeb46000-0xfeb46fff irq 18 a t device 18.0 on pci0
- usbus0 on ohci0
- ehci0: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfeb45000-0xfeb450ff irq 17 at device 18.2 on pci0
- usbus1: EHCI version 1.0
- usbus1 on ehci0
- ohci1: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfeb44000-0xfeb44fff irq 18 a t device 19.0 on pci0
- usbus2 on ohci1
- ehci1: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfeb43000-0xfeb430ff irq 17 at device 19.2 on pci0
- usbus3: EHCI version 1.0
- usbus3 on ehci1
- pci0: <serial bus, SMBus> at device 20.0 (no driver attached)
- isab0: <PCI-ISA bridge> at device 20.3 on pci0
- isa0: <ISA bus> on isab0
- pcib2: <ACPI PCI-PCI bridge> at device 20.4 on pci0
- pci2: <ACPI PCI bus> on pcib2
- ohci2: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfeb42000-0xfeb42fff irq 18 a t device 20.5 on pci0
- usbus4 on ohci2
- ohci3: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfeb41000-0xfeb41fff irq 18 a t device 22.0 on pci0
- usbus5 on ohci3
- ehci2: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfeb40000-0xfeb400ff irq 17 at device 22.2 on pci0
- usbus6: EHCI version 1.0
- usbus6 on ehci2
- acpi_button0: <Power Button> on acpi0
- uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
- orm0: <ISA Option ROM> at iomem 0xce800-0xcf7ff on isa0
- amdsbwd0: <AMD SB8xx Watchdog Timer> at iomem 0xfec000f0-0xfec000f3,0xfec000f4-0 xfec000f7 on isa0
- sc0: <System console> at flags 0x100 on isa0
- sc0: VGA <16 virtual consoles, flags=0x300>
- vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
- atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
- atkbd0: <AT Keyboard> irq 1 on atkbdc0
- kbd0 at atkbd0
- atkbd0: [GIANT-LOCKED]
- wbwd0: DevID 0xb4 DevRev 0x73, will not attach, please report this.
- acpi_throttle0: <ACPI CPU Throttling> on cpu0
- hwpstate0: <Cool`n'Quiet 2.0> on cpu0
- acpi_throttle1: <ACPI CPU Throttling> on cpu1
- acpi_throttle1: failed to attach P_CNT
- device_attach: acpi_throttle1 attach returned 6
- Timecounters tick every 1.000 msec
- ipfw2 (+ipv6) initialized, divert enabled, nat enabled, default to accept, loggi ng disabled
- DUMMYNET 0xfffffe00041ccc80 with IPv6 initialized (100409)
- load_dn_sched dn_sched RR loaded
- load_dn_sched dn_sched WF2Q+ loaded
- load_dn_sched dn_sched FIFO loaded
- load_dn_sched dn_sched PRIO loaded
- load_dn_sched dn_sched QFQ loaded
- usbus0: 12Mbps Full Speed USB v1.0
- usbus1: 480Mbps High Speed USB v2.0
- usbus2: 12Mbps Full Speed USB v1.0
- usbus3: 480Mbps High Speed USB v2.0
- usbus4: 12Mbps Full Speed USB v1.0
- usbus5: 12Mbps Full Speed USB v1.0
- usbus6: 480Mbps High Speed USB v2.0
- ugen0.1: <ATI> at usbus0
- uhub0: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
- ugen1.1: <ATI> at usbus1
- uhub1: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
- ugen2.1: <ATI> at usbus2
- uhub2: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
- ugen3.1: <ATI> at usbus3
- uhub3: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3
- ugen4.1: <ATI> at usbus4
- uhub4: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
- ugen5.1: <ATI> at usbus5
- uhub5: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5
- ugen6.1: <ATI> at usbus6
- uhub6: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus6
- ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
- ada0: <Hitachi HDS5C3020ALA632 ML6OA580> ATA-8 SATA 3.x device
- ada0: Serial Number ML4220F312EBKK
- ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
- ada0: Command Queueing enabled
- ada0: 1907729MB (3907029168 512 byte sectors: 16H 63S/T 16383C)
- ada0: Previously was known as ad4
- ada1 at ahcich1 bus 0 scbus1 target 0 lun 0
- ada1: <ST2000DM001-1CH164 CC29> ATA-9 SATA 3.x device
- ada1: Serial Number Z1E5JCTH
- ada1: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
- ada1: Command Queueing enabled
- ada1: 1907729MB (3907029168 512 byte sectors: 16H 63S/T 16383C)
- ada1: quirks=0x1<4K>
- ada1: Previously was known as ad6
- ada2 at ahcich2 bus 0 scbus2 target 0 lun 0
- ada2: <Hitachi HDS5C3020ALA632 ML6OA580> ATA-8 SATA 3.x device
- ada2: Serial Number ML0220F30WBDGD
- ada2: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
- ada2: Command Queueing enabled
- ada2: 1907729MB (3907029168 512 byte sectors: 16H 63S/T 16383C)
- ada2: Previously was known as ad8
- ada3 at ahcich3 bus 0 scbus3 target 0 lun 0
- ada3: <ST2000DM001-1CH164 CC29> ATA-9 SATA 3.x device
- ada3: Serial Number Z1E5J86F
- ada3: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
- ada3: Command Queueing enabled
- ada3: 1907729MB (3907029168 512 byte sectors: 16H 63S/T 16383C)
- ada3: quirks=0x1<4K>
- ada3: Previously was known as ad10
- SMP: AP CPU #1 Launched!
- Timecounter "TSC" frequency 1600032771 Hz quality 800
- uhub4: 2 ports with 2 removable, self powered
- uhub5: 4 ports with 4 removable, self powered
- uhub2: 5 ports with 5 removable, self powered
- uhub0: 5 ports with 5 removable, self powered
- Root mount waiting for: usbus6 usbus3 usbus1
- Root mount waiting for: usbus6 usbus3 usbus1
- uhub6: 4 ports with 4 removable, self powered
- uhub3: 5 ports with 5 removable, self powered
- uhub1: 5 ports with 5 removable, self powered
- Root mount waiting for: usbus1
- ugen1.2: <SanDisk> at usbus1
- umass0: <SanDisk U3 Cruzer Micro, class 0/0, rev 2.00/2.00, addr 2> on usbus1
- umass0: SCSI over Bulk-Only; quirks = 0x4100
- umass0:7:0:-1: Attached to scbus7
- Trying to mount root from ufs:/dev/ufs/FreeNASs1a [ro]...
- mountroot: waiting for device /dev/ufs/FreeNASs1a ...
- da0 at umass-sim0 bus 0 scbus7 target 0 lun 0
- da0: <SanDisk Cruzer 7.01> Removable Direct Access SCSI-0 device
- da0: Serial Number 0877621DC34224AB
- da0: 40.000MB/s transfers
- da0: 3859MB (7905279 512 byte sectors: 255H 63S/T 492C)
- da0: quirks=0x2<NO_6_BYTE>
- GEOM_RAID5: Module loaded, version 1.1.20130907.44 (rev 5c6d2a159411)
- ZFS filesystem version: 5
- ZFS storage pool version: features support (5000)
- GEOM_ELI: Device ada0p1.eli created.
- GEOM_ELI: Encryption: AES-XTS 256
- GEOM_ELI: Crypto: software
- GEOM_ELI: Device ada1p1.eli created.
- GEOM_ELI: Encryption: AES-XTS 256
- GEOM_ELI: Crypto: software
- GEOM_ELI: Device ada2p1.eli created.
- GEOM_ELI: Encryption: AES-XTS 256
- GEOM_ELI: Crypto: software
- GEOM_ELI: Device ada3p1.eli created.
- GEOM_ELI: Encryption: AES-XTS 256
- GEOM_ELI: Crypto: software
- bridge0: Ethernet address: 02:fe:4a:c8:9c:00
- bridge0: link state changed to UP
- em0: promiscuous mode enabled
- epair0a: Ethernet address: 02:08:5b:00:0c:0a
- epair0b: Ethernet address: 02:08:5b:00:0d:0b
- epair0a: link state changed to UP
- epair0b: link state changed to UP
- em0: link state changed to DOWN
- epair0a: promiscuous mode enabled
- em0: link state changed to UP
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement