Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- -- Logs begin at Mon 2017-02-13 21:45:02 CET, end at Sat 2017-02-18 10:12:32 CET. --
- Feb 13 21:45:02 LibreELEC kernel: Booting Linux on physical CPU 0x0
- Feb 13 21:45:02 LibreELEC kernel: Linux version 4.10.0-rc8 (libreelec.tv@nmacleod.com) (gcc version 6.2.0 (GCC) ) #1 SMP Mon Feb 13 20:31:26 GMT 2017
- Feb 13 21:45:02 LibreELEC kernel: CPU: ARMv7 Processor [410fd034] revision 4 (ARMv7), cr=10c5383d
- Feb 13 21:45:02 LibreELEC kernel: CPU: div instructions available: patching division code
- Feb 13 21:45:02 LibreELEC kernel: CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
- Feb 13 21:45:02 LibreELEC kernel: OF: fdt:Machine model: Raspberry Pi 3 Model B Rev 1.2
- Feb 13 21:45:02 LibreELEC kernel: cma: Reserved 8 MiB at 0x2b400000
- Feb 13 21:45:02 LibreELEC kernel: Memory policy: Data cache writealloc
- Feb 13 21:45:02 LibreELEC kernel: On node 0 totalpages: 179968
- Feb 13 21:45:02 LibreELEC kernel: free_area_init_node: node 0, pgdat 80c36c40, node_mem_map aadd0000
- Feb 13 21:45:02 LibreELEC kernel: Normal zone: 1582 pages used for memmap
- Feb 13 21:45:02 LibreELEC kernel: Normal zone: 0 pages reserved
- Feb 13 21:45:02 LibreELEC kernel: Normal zone: 179968 pages, LIFO batch:31
- Feb 13 21:45:02 LibreELEC kernel: percpu: Embedded 14 pages/cpu @abea3000 s25356 r8192 d23796 u57344
- Feb 13 21:45:02 LibreELEC kernel: pcpu-alloc: s25356 r8192 d23796 u57344 alloc=14*4096
- Feb 13 21:45:02 LibreELEC kernel: pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
- Feb 13 21:45:02 LibreELEC kernel: Built 1 zonelists in Zone order, mobility grouping on. Total pages: 178386
- Feb 13 21:45:02 LibreELEC kernel: Kernel command line: 8250.nr_uarts=0 dma.dmachans=0x7f35 bcm2708_fb.fbwidth=1184 bcm2708_fb.fbheight=624 bcm2709.boardrev=0xa02082 bcm2709.serial=0x5ea3802c smsc95xx.macaddr=B8:27:EB:A3:80:2C bcm2708_fb.fbswap=1 bcm2709.uart_clock=48000000 vc_mem.mem_base=0x3eb00000 vc_mem.mem_size=0x3ff00000 boot=/dev/mmcblk0p1 disk=/dev/mmcblk0p2 quiet root=/dev/ram0 rdinit=/init BOOT_IMAGE=/kernel.img usbcore.autosuspend=-1
- Feb 13 21:45:02 LibreELEC kernel: PID hash table entries: 4096 (order: 2, 16384 bytes)
- Feb 13 21:45:02 LibreELEC kernel: Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
- Feb 13 21:45:02 LibreELEC kernel: Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
- Feb 13 21:45:02 LibreELEC kernel: Memory: 692300K/719872K available (6144K kernel code, 223K rwdata, 1296K rodata, 3072K init, 402K bss, 19380K reserved, 8192K cma-reserved)
- Feb 13 21:45:02 LibreELEC kernel: Virtual kernel memory layout:
- vector : 0xffff0000 - 0xffff1000 ( 4 kB)
- fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
- vmalloc : 0xac000000 - 0xff800000 (1336 MB)
- lowmem : 0x80000000 - 0xabf00000 ( 703 MB)
- modules : 0x7f000000 - 0x80000000 ( 16 MB)
- .text : 0x80008000 - 0x80700000 (7136 kB)
- .init : 0x80900000 - 0x80c00000 (3072 kB)
- .data : 0x80c00000 - 0x80c37f08 ( 224 kB)
- .bss : 0x80c39000 - 0x80c9da34 ( 403 kB)
- Feb 13 21:45:02 LibreELEC kernel: SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
- Feb 13 21:45:02 LibreELEC kernel: Hierarchical RCU implementation.
- Feb 13 21:45:02 LibreELEC kernel: Build-time adjustment of leaf fanout to 32.
- Feb 13 21:45:02 LibreELEC kernel: NR_IRQS:16 nr_irqs:16 16
- Feb 13 21:45:02 LibreELEC kernel: arm_arch_timer: WARNING: Invalid trigger for IRQ16, assuming level low
- Feb 13 21:45:02 LibreELEC kernel: arm_arch_timer: WARNING: Please fix your firmware
- Feb 13 21:45:02 LibreELEC kernel: arm_arch_timer: WARNING: Invalid trigger for IRQ17, assuming level low
- Feb 13 21:45:02 LibreELEC kernel: arm_arch_timer: WARNING: Please fix your firmware
- Feb 13 21:45:02 LibreELEC kernel: arm_arch_timer: Architected cp15 timer(s) running at 19.20MHz (phys).
- Feb 13 21:45:02 LibreELEC kernel: clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
- Feb 13 21:45:02 LibreELEC kernel: sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
- Feb 13 21:45:02 LibreELEC kernel: Switching to timer-based delay loop, resolution 52ns
- Feb 13 21:45:02 LibreELEC kernel: Console: colour dummy device 80x30
- Feb 13 21:45:02 LibreELEC kernel: console [tty0] enabled
- Feb 13 21:45:02 LibreELEC kernel: Calibrating delay loop (skipped), value calculated using timer frequency.. 38.00 BogoMIPS (lpj=64000)
- Feb 13 21:45:02 LibreELEC kernel: pid_max: default: 32768 minimum: 301
- Feb 13 21:45:02 LibreELEC kernel: Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
- Feb 13 21:45:02 LibreELEC kernel: Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
- Feb 13 21:45:02 LibreELEC kernel: Disabling cpuset control group subsystem
- Feb 13 21:45:02 LibreELEC kernel: CPU: Testing write buffer coherency: ok
- Feb 13 21:45:02 LibreELEC kernel: CPU0: update cpu_capacity 1024
- Feb 13 21:45:02 LibreELEC kernel: CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
- Feb 13 21:45:02 LibreELEC kernel: Setting up static identity map for 0x100000 - 0x100034
- Feb 13 21:45:02 LibreELEC kernel: smp: Bringing up secondary CPUs ...
- Feb 13 21:45:02 LibreELEC kernel: arm_arch_timer: WARNING: Invalid trigger for IRQ16, assuming level low
- Feb 13 21:45:02 LibreELEC kernel: arm_arch_timer: WARNING: Please fix your firmware
- Feb 13 21:45:02 LibreELEC kernel: arm_arch_timer: WARNING: Invalid trigger for IRQ17, assuming level low
- Feb 13 21:45:02 LibreELEC kernel: arm_arch_timer: WARNING: Please fix your firmware
- Feb 13 21:45:02 LibreELEC kernel: CPU1: update cpu_capacity 1024
- Feb 13 21:45:02 LibreELEC kernel: CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
- Feb 13 21:45:02 LibreELEC kernel: arm_arch_timer: WARNING: Invalid trigger for IRQ16, assuming level low
- Feb 13 21:45:02 LibreELEC kernel: arm_arch_timer: WARNING: Please fix your firmware
- Feb 13 21:45:02 LibreELEC kernel: arm_arch_timer: WARNING: Invalid trigger for IRQ17, assuming level low
- Feb 13 21:45:02 LibreELEC kernel: arm_arch_timer: WARNING: Please fix your firmware
- Feb 13 21:45:02 LibreELEC kernel: CPU2: update cpu_capacity 1024
- Feb 13 21:45:02 LibreELEC kernel: CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
- Feb 13 21:45:02 LibreELEC kernel: arm_arch_timer: WARNING: Invalid trigger for IRQ16, assuming level low
- Feb 13 21:45:02 LibreELEC kernel: arm_arch_timer: WARNING: Please fix your firmware
- Feb 13 21:45:02 LibreELEC kernel: arm_arch_timer: WARNING: Invalid trigger for IRQ17, assuming level low
- Feb 13 21:45:02 LibreELEC kernel: arm_arch_timer: WARNING: Please fix your firmware
- Feb 13 21:45:02 LibreELEC kernel: CPU3: update cpu_capacity 1024
- Feb 13 21:45:02 LibreELEC kernel: CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
- Feb 13 21:45:02 LibreELEC kernel: smp: Brought up 1 node, 4 CPUs
- Feb 13 21:45:02 LibreELEC kernel: SMP: Total of 4 processors activated (153.00 BogoMIPS).
- Feb 13 21:45:02 LibreELEC kernel: CPU: All CPU(s) started in HYP mode.
- Feb 13 21:45:02 LibreELEC kernel: CPU: Virtualization extensions available.
- Feb 13 21:45:02 LibreELEC kernel: devtmpfs: initialized
- Feb 13 21:45:02 LibreELEC kernel: VFP support v0.3: implementor 41 architecture 3 part 40 variant 3 rev 4
- Feb 13 21:45:02 LibreELEC kernel: clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
- Feb 13 21:45:02 LibreELEC kernel: pinctrl core: initialized pinctrl subsystem
- Feb 13 21:45:02 LibreELEC kernel: NET: Registered protocol family 16
- Feb 13 21:45:02 LibreELEC kernel: DMA: preallocated 1024 KiB pool for atomic coherent allocations
- Feb 13 21:45:02 LibreELEC kernel: cpuidle: using governor ladder
- Feb 13 21:45:02 LibreELEC kernel: cpuidle: using governor menu
- Feb 13 21:45:02 LibreELEC kernel: Serial: AMBA PL011 UART driver
- Feb 13 21:45:02 LibreELEC kernel: bcm2835-mbox 3f00b880.mailbox: mailbox enabled
- Feb 13 21:45:02 LibreELEC kernel: uart-pl011 3f201000.serial: could not find pctldev for node /soc/gpio@7e200000/uart0_pins, deferring probe
- Feb 13 21:45:02 LibreELEC kernel: bcm2835-dma 3f007000.dma: DMA legacy API manager at ac00f000, dmachans=0x1
- Feb 13 21:45:02 LibreELEC kernel: SCSI subsystem initialized
- Feb 13 21:45:02 LibreELEC kernel: usbcore: registered new interface driver usbfs
- Feb 13 21:45:02 LibreELEC kernel: usbcore: registered new interface driver hub
- Feb 13 21:45:02 LibreELEC kernel: usbcore: registered new device driver usb
- Feb 13 21:45:02 LibreELEC kernel: raspberrypi-firmware soc:firmware: Attached to firmware from 2017-02-13 18:18
- Feb 13 21:45:02 LibreELEC kernel: clocksource: Switched to clocksource arch_sys_counter
- Feb 13 21:45:02 LibreELEC kernel: NET: Registered protocol family 2
- Feb 13 21:45:02 LibreELEC kernel: TCP established hash table entries: 8192 (order: 3, 32768 bytes)
- Feb 13 21:45:02 LibreELEC kernel: TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
- Feb 13 21:45:02 LibreELEC kernel: TCP: Hash tables configured (established 8192 bind 8192)
- Feb 13 21:45:02 LibreELEC kernel: UDP hash table entries: 512 (order: 2, 16384 bytes)
- Feb 13 21:45:02 LibreELEC kernel: UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
- Feb 13 21:45:02 LibreELEC kernel: NET: Registered protocol family 1
- Feb 13 21:45:02 LibreELEC kernel: RPC: Registered named UNIX socket transport module.
- Feb 13 21:45:02 LibreELEC kernel: RPC: Registered udp transport module.
- Feb 13 21:45:02 LibreELEC kernel: RPC: Registered tcp transport module.
- Feb 13 21:45:02 LibreELEC kernel: RPC: Registered tcp NFSv4.1 backchannel transport module.
- Feb 13 21:45:02 LibreELEC kernel: futex hash table entries: 1024 (order: 4, 65536 bytes)
- Feb 13 21:45:02 LibreELEC kernel: workingset: timestamp_bits=14 max_order=18 bucket_order=4
- Feb 13 21:45:02 LibreELEC kernel: squashfs: version 4.0 (2009/01/31) Phillip Lougher
- Feb 13 21:45:02 LibreELEC kernel: NFS: Registering the id_resolver key type
- Feb 13 21:45:02 LibreELEC kernel: Key type id_resolver registered
- Feb 13 21:45:02 LibreELEC kernel: Key type id_legacy registered
- Feb 13 21:45:02 LibreELEC kernel: nfs4filelayout_init: NFSv4 File Layout Driver Registering...
- Feb 13 21:45:02 LibreELEC kernel: Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
- Feb 13 21:45:02 LibreELEC kernel: io scheduler noop registered (default)
- Feb 13 21:45:02 LibreELEC kernel: io scheduler deadline registered
- Feb 13 21:45:02 LibreELEC kernel: io scheduler cfq registered
- Feb 13 21:45:02 LibreELEC kernel: gpio gpiochip1: GPIO chip parent is NULL
- Feb 13 21:45:02 LibreELEC kernel: BCM2708FB: allocated DMA memory eb510000
- Feb 13 21:45:02 LibreELEC kernel: BCM2708FB: allocated DMA channel 0 @ ac00f000
- Feb 13 21:45:02 LibreELEC kernel: Console: switching to colour frame buffer device 148x39
- Feb 13 21:45:02 LibreELEC kernel: bcm2835-rng 3f104000.rng: hwrng registered
- Feb 13 21:45:02 LibreELEC kernel: vc-cma: Videocore CMA driver
- Feb 13 21:45:02 LibreELEC kernel: vc-cma: vc_cma_base = 0x00000000
- Feb 13 21:45:02 LibreELEC kernel: vc-cma: vc_cma_size = 0x00000000 (0 MiB)
- Feb 13 21:45:02 LibreELEC kernel: vc-cma: vc_cma_initial = 0x00000000 (0 MiB)
- Feb 13 21:45:02 LibreELEC kernel: vc-mem: phys_addr:0x00000000 mem_base=0x3eb00000 mem_size:0x3ff00000(1023 MiB)
- Feb 13 21:45:02 LibreELEC kernel: brd: module loaded
- Feb 13 21:45:02 LibreELEC kernel: loop: module loaded
- Feb 13 21:45:02 LibreELEC kernel: nbd: registered device at major 43
- Feb 13 21:45:02 LibreELEC kernel: usbcore: registered new interface driver rtsx_usb
- Feb 13 21:45:02 LibreELEC kernel: Loading iSCSI transport class v2.0-870.
- Feb 13 21:45:02 LibreELEC kernel: iscsi: registered transport (tcp)
- Feb 13 21:45:02 LibreELEC kernel: libphy: Fixed MDIO Bus: probed
- Feb 13 21:45:02 LibreELEC kernel: tun: Universal TUN/TAP device driver, 1.6
- Feb 13 21:45:02 LibreELEC kernel: tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
- Feb 13 21:45:02 LibreELEC kernel: usbcore: registered new interface driver dm9601
- Feb 13 21:45:02 LibreELEC kernel: usbcore: registered new interface driver smsc95xx
- Feb 13 21:45:02 LibreELEC kernel: dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
- Feb 13 21:45:02 LibreELEC kernel: Core Release: 2.80a
- Feb 13 21:45:02 LibreELEC kernel: Setting default values for core params
- Feb 13 21:45:02 LibreELEC kernel: Finished setting default values for core params
- Feb 13 21:45:02 LibreELEC kernel: Using Buffer DMA mode
- Feb 13 21:45:02 LibreELEC kernel: Periodic Transfer Interrupt Enhancement - disabled
- Feb 13 21:45:02 LibreELEC kernel: Multiprocessor Interrupt Enhancement - disabled
- Feb 13 21:45:02 LibreELEC kernel: OTG VER PARAM: 0, OTG VER FLAG: 0
- Feb 13 21:45:02 LibreELEC kernel: Dedicated Tx FIFOs mode
- Feb 13 21:45:02 LibreELEC kernel: WARN::dwc_otg_hcd_init:1053: FIQ DMA bounce buffers: virt = 0xab504000 dma = 0xeb504000 len=9024
- Feb 13 21:45:02 LibreELEC kernel: FIQ FSM acceleration enabled for :
- Non-periodic Split Transactions
- Periodic Split Transactions
- High-Speed Isochronous Endpoints
- Interrupt/Control Split Transaction hack enabled
- Feb 13 21:45:02 LibreELEC kernel: dwc_otg: Microframe scheduler enabled
- Feb 13 21:45:02 LibreELEC kernel: WARN::hcd_init_fiq:459: FIQ on core 1 at 0x80527ad4
- Feb 13 21:45:02 LibreELEC kernel: WARN::hcd_init_fiq:460: FIQ ASM at 0x80527e34 length 36
- Feb 13 21:45:02 LibreELEC kernel: WARN::hcd_init_fiq:486: MPHI regs_base at 0xac07d000
- Feb 13 21:45:02 LibreELEC kernel: dwc_otg 3f980000.usb: DWC OTG Controller
- Feb 13 21:45:02 LibreELEC kernel: dwc_otg 3f980000.usb: new USB bus registered, assigned bus number 1
- Feb 13 21:45:02 LibreELEC kernel: dwc_otg 3f980000.usb: irq 62, io mem 0x00000000
- Feb 13 21:45:02 LibreELEC kernel: Init: Port Power? op_state=1
- Feb 13 21:45:02 LibreELEC kernel: Init: Power Port (0)
- Feb 13 21:45:02 LibreELEC kernel: usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
- Feb 13 21:45:02 LibreELEC kernel: usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- Feb 13 21:45:02 LibreELEC kernel: usb usb1: Product: DWC OTG Controller
- Feb 13 21:45:02 LibreELEC kernel: usb usb1: Manufacturer: Linux 4.10.0-rc8 dwc_otg_hcd
- Feb 13 21:45:02 LibreELEC kernel: usb usb1: SerialNumber: 3f980000.usb
- Feb 13 21:45:02 LibreELEC kernel: hub 1-0:1.0: USB hub found
- Feb 13 21:45:02 LibreELEC kernel: hub 1-0:1.0: 1 port detected
- Feb 13 21:45:02 LibreELEC kernel: dwc_otg: FIQ enabled
- Feb 13 21:45:02 LibreELEC kernel: dwc_otg: NAK holdoff enabled
- Feb 13 21:45:02 LibreELEC kernel: dwc_otg: FIQ split-transaction FSM enabled
- Feb 13 21:45:02 LibreELEC kernel: Module dwc_common_port init
- Feb 13 21:45:02 LibreELEC kernel: usbcore: registered new interface driver usb-storage
- Feb 13 21:45:02 LibreELEC kernel: mousedev: PS/2 mouse device common for all mice
- Feb 13 21:45:02 LibreELEC kernel: i2c /dev entries driver
- Feb 13 21:45:02 LibreELEC kernel: (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
- Feb 13 21:45:02 LibreELEC kernel: bcm2835-wdt 3f100000.watchdog: Broadcom BCM2835 watchdog timer
- Feb 13 21:45:02 LibreELEC kernel: bcm2835-cpufreq: min=600000 max=1200000
- Feb 13 21:45:02 LibreELEC kernel: sdhci: Secure Digital Host Controller Interface driver
- Feb 13 21:45:02 LibreELEC kernel: sdhci: Copyright(c) Pierre Ossman
- Feb 13 21:45:02 LibreELEC kernel: sdhost: log_buf @ ab507000 (eb507000)
- Feb 13 21:45:02 LibreELEC kernel: mmc0: sdhost-bcm2835 loaded - DMA enabled (>1)
- Feb 13 21:45:02 LibreELEC kernel: sdhci-pltfm: SDHCI platform and OF driver helper
- Feb 13 21:45:02 LibreELEC kernel: ledtrig-cpu: registered to indicate activity on CPUs
- Feb 13 21:45:02 LibreELEC kernel: hidraw: raw HID events driver (C) Jiri Kosina
- Feb 13 21:45:02 LibreELEC kernel: usbcore: registered new interface driver usbhid
- Feb 13 21:45:02 LibreELEC kernel: usbhid: USB HID core driver
- Feb 13 21:45:02 LibreELEC kernel: vchiq: vchiq_init_state: slot_zero = ab580000, is_master = 0
- Feb 13 21:45:02 LibreELEC kernel: NET: Registered protocol family 10
- Feb 13 21:45:02 LibreELEC kernel: Segment Routing with IPv6
- Feb 13 21:45:02 LibreELEC kernel: NET: Registered protocol family 17
- Feb 13 21:45:02 LibreELEC kernel: Key type dns_resolver registered
- Feb 13 21:45:02 LibreELEC kernel: Registering SWP/SWPB emulation handler
- Feb 13 21:45:02 LibreELEC kernel: vc-sm: Videocore shared memory driver
- Feb 13 21:45:02 LibreELEC kernel: [vc_sm_connected_init]: start
- Feb 13 21:45:02 LibreELEC kernel: [vc_sm_connected_init]: end - returning 0
- Feb 13 21:45:02 LibreELEC kernel: 3f201000.serial: ttyAMA0 at MMIO 0x3f201000 (irq = 87, base_baud = 0) is a PL011 rev2
- Feb 13 21:45:02 LibreELEC kernel: console [netcon0] enabled
- Feb 13 21:45:02 LibreELEC kernel: netconsole: network logging started
- Feb 13 21:45:02 LibreELEC kernel: of_cfs_init
- Feb 13 21:45:02 LibreELEC kernel: of_cfs_init: OK
- Feb 13 21:45:02 LibreELEC kernel: Freeing unused kernel memory: 3072K
- Feb 13 21:45:02 LibreELEC kernel: mmc0: host does not support reading read-only switch, assuming write-enable
- Feb 13 21:45:02 LibreELEC kernel: mmc0: overclocking to 100000000Hz
- Feb 13 21:45:02 LibreELEC kernel: mmc0: new high speed SDHC card at address 59b4
- Feb 13 21:45:02 LibreELEC kernel: mmcblk0: mmc0:59b4 NCard 14.7 GiB
- Feb 13 21:45:02 LibreELEC kernel: mmcblk0: p1 p2
- Feb 13 21:45:02 LibreELEC kernel: Indeed it is in host mode hprt0 = 00021501
- Feb 13 21:45:02 LibreELEC kernel: random: fast init done
- Feb 13 21:45:02 LibreELEC kernel: usb 1-1: new high-speed USB device number 2 using dwc_otg
- Feb 13 21:45:02 LibreELEC kernel: Indeed it is in host mode hprt0 = 00001101
- Feb 13 21:45:02 LibreELEC kernel: usb 1-1: New USB device found, idVendor=0424, idProduct=9514
- Feb 13 21:45:02 LibreELEC kernel: usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
- Feb 13 21:45:02 LibreELEC kernel: hub 1-1:1.0: USB hub found
- Feb 13 21:45:02 LibreELEC kernel: hub 1-1:1.0: 5 ports detected
- Feb 13 21:45:02 LibreELEC kernel: usb 1-1.1: new high-speed USB device number 3 using dwc_otg
- Feb 13 21:45:02 LibreELEC kernel: usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00
- Feb 13 21:45:02 LibreELEC kernel: usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
- Feb 13 21:45:02 LibreELEC kernel: smsc95xx v1.0.5
- Feb 13 21:45:02 LibreELEC kernel: smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:a3:80:2c
- Feb 13 21:45:02 LibreELEC kernel: EXT4-fs (mmcblk0p2): couldn't mount as ext3 due to feature incompatibilities
- Feb 13 21:45:02 LibreELEC kernel: EXT4-fs (mmcblk0p2): couldn't mount as ext2 due to feature incompatibilities
- Feb 13 21:45:02 LibreELEC kernel: EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
- Feb 13 21:45:02 LibreELEC kernel: usb 1-1.4: new full-speed USB device number 4 using dwc_otg
- Feb 13 21:45:02 LibreELEC kernel: usb 1-1.4: New USB device found, idVendor=0c45, idProduct=2b02
- Feb 13 21:45:02 LibreELEC kernel: usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
- Feb 13 21:45:02 LibreELEC kernel: usb 1-1.4: Product: 2.4G Wireless Device
- Feb 13 21:45:02 LibreELEC kernel: usb 1-1.4: Manufacturer: 2.4G
- Feb 13 21:45:02 LibreELEC kernel: input: 2.4G 2.4G Wireless Device as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.4/1-1.4:1.2/0003:0C45:2B02.0001/input/input0
- Feb 13 21:45:02 LibreELEC kernel: hid-generic 0003:0C45:2B02.0001: input,hiddev0,hidraw0: USB HID v1.10 Mouse [2.4G 2.4G Wireless Device] on usb-3f980000.usb-1.4/input2
- Feb 13 21:45:02 LibreELEC kernel: input: 2.4G 2.4G Wireless Device as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.4/1-1.4:1.3/0003:0C45:2B02.0002/input/input1
- Feb 13 21:45:02 LibreELEC kernel: hid-generic 0003:0C45:2B02.0002: input,hidraw1: USB HID v1.10 Keyboard [2.4G 2.4G Wireless Device] on usb-3f980000.usb-1.4/input3
- Feb 13 21:45:02 LibreELEC systemd[1]: System time before build time, advancing clock.
- Feb 13 21:45:02 LibreELEC systemd[1]: systemd 232 running in system mode. (-PAM -AUDIT -SELINUX -IMA -APPARMOR -SMACK -SYSVINIT -UTMP -LIBCRYPTSETUP -GCRYPT -GNUTLS -ACL -XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -IDN)
- Feb 13 21:45:02 LibreELEC systemd[1]: Detected architecture arm.
- Feb 13 21:45:02 LibreELEC systemd[1]: Set hostname to <LibreELEC>.
- Feb 13 21:45:02 LibreELEC kernel: usb 1-1.3: new high-speed USB device number 5 using dwc_otg
- Feb 13 21:45:02 LibreELEC systemd[1]: Listening on Journal Socket.
- Feb 13 21:45:02 LibreELEC systemd[1]: Listening on Journal Socket (/dev/log).
- Feb 13 21:45:02 LibreELEC systemd[1]: Listening on udev Kernel Socket.
- Feb 13 21:45:02 LibreELEC systemd[1]: Started Forward Password Requests to Wall Directory Watch.
- Feb 13 21:45:02 LibreELEC systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
- Feb 13 21:45:02 LibreELEC systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
- Feb 13 21:45:02 LibreELEC systemd[1]: Listening on RPCbind Server Activation Socket.
- Feb 13 21:45:02 LibreELEC kernel: usb 1-1.3: New USB device found, idVendor=0572, idProduct=6831
- Feb 13 21:45:02 LibreELEC kernel: usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
- Feb 13 21:45:02 LibreELEC kernel: usb 1-1.3: Product: S960
- Feb 13 21:45:02 LibreELEC kernel: usb 1-1.3: Manufacturer: Bestunar
- Feb 13 21:45:02 LibreELEC kernel: usb 1-1.3: SerialNumber: 20120511
- Feb 13 21:45:02 LibreELEC systemd-journald[218]: Journal started
- Feb 13 21:45:02 LibreELEC systemd-journald[218]: Runtime journal (/run/log/journal/bb5c31d2c6674931ba412f5affbdfe9b) is 0B, max 0B, 0B free.
- Feb 13 21:45:02 LibreELEC systemd-sysctl[208]: Couldn't write 'fq_codel' to 'net/core/default_qdisc', ignoring: No such file or directory
- Feb 13 21:45:02 LibreELEC systemd[1]: Starting Flush Journal to Persistent Storage...
- Feb 13 21:45:02 LibreELEC systemd[1]: Started Create Static Device Nodes in /dev.
- Feb 13 21:45:02 LibreELEC systemd[1]: Reached target Local File Systems (Pre).
- Feb 13 21:45:02 LibreELEC systemd-journald[218]: Runtime journal (/run/log/journal/bb5c31d2c6674931ba412f5affbdfe9b) is 0B, max 0B, 0B free.
- Feb 13 21:45:02 LibreELEC systemd[1]: Started Flush Journal to Persistent Storage.
- Feb 13 21:45:02 LibreELEC systemd[1]: Started udev Coldplug all Devices.
- Feb 13 21:45:02 LibreELEC Boot[228]: ### swap disabled via configfile ###
- Feb 13 21:45:02 LibreELEC Boot[234]: ### swap disabled via configfile ###
- Feb 13 21:45:02 LibreELEC systemd[1]: Started Mounting swapfile.
- Feb 13 21:45:02 LibreELEC systemd[1]: Reached target Swap.
- Feb 13 21:45:02 LibreELEC systemd[1]: Mounting Temporary Directory...
- Feb 13 21:45:02 LibreELEC systemd[1]: Mounted Temporary Directory.
- Feb 13 21:45:02 LibreELEC systemd[1]: Reached target Local File Systems.
- Feb 13 21:45:02 LibreELEC systemd[1]: Starting Create Volatile Files and Directories...
- Feb 13 21:45:02 LibreELEC systemd[1]: Started Create Volatile Files and Directories.
- Feb 13 21:45:02 LibreELEC systemd[1]: Starting Add random entropy from file...
- Feb 13 21:45:02 LibreELEC systemd[1]: Starting RPC Bind...
- Feb 13 21:45:02 LibreELEC systemd[1]: Starting Update hwdb.bin...
- Feb 13 21:45:02 LibreELEC systemd[1]: Starting Setup User config dir...
- Feb 13 21:45:02 LibreELEC systemd[1]: Started Setup User config dir.
- Feb 13 21:45:02 LibreELEC systemd[1]: Started RPC Bind.
- Feb 13 21:45:02 LibreELEC kernel: random: crng init done
- Feb 13 21:45:02 LibreELEC systemd[1]: Started Add random entropy from file.
- Feb 13 21:45:03 LibreELEC systemd[1]: Started Update hwdb.bin.
- Feb 13 21:45:03 LibreELEC systemd[1]: Starting udev Kernel Device Manager...
- Feb 13 21:45:03 LibreELEC systemd-udevd[249]: Invalid rule /usr/lib/udev/rules.d/73-seat-late.rules:15: RUN{builtin}: 'uaccess' unknown
- Feb 13 21:45:03 LibreELEC systemd[1]: Started udev Kernel Device Manager.
- Feb 13 21:45:03 LibreELEC systemd[1]: Reached target System Initialization.
- Feb 13 21:45:03 LibreELEC systemd[1]: Started Daily Cleanup of Temporary Directories.
- Feb 13 21:45:03 LibreELEC systemd[1]: Reached target Timers.
- Feb 13 21:45:03 LibreELEC systemd[1]: Listening on D-Bus System Message Bus Socket.
- Feb 13 21:45:03 LibreELEC systemd[1]: Reached target Sockets.
- Feb 13 21:45:03 LibreELEC systemd[1]: Reached target Basic System.
- Feb 13 21:45:03 LibreELEC systemd[1]: Started Kodi splash animation.
- Feb 13 21:45:03 LibreELEC systemd[1]: Starting Login Service...
- Feb 13 21:45:03 LibreELEC systemd[1]: Starting unbind Framebuffer console...
- Feb 13 21:45:03 LibreELEC systemd[1]: Starting Kodi clean debug logs...
- Feb 13 21:45:03 LibreELEC systemd[1]: Started Eventlirc server daemon.
- Feb 13 21:45:03 LibreELEC kernel: Console: switching to colour dummy device 80x30
- Feb 13 21:45:03 LibreELEC systemd[1]: Starting PulseAudio Sound Service...
- Feb 13 21:45:03 LibreELEC systemd[1]: Starting OpenSSH server daemon...
- Feb 13 21:45:03 LibreELEC systemd[1]: Started D-Bus System Message Bus.
- Feb 13 21:45:03 LibreELEC kernel: rc_core: loading out-of-tree module taints kernel.
- Feb 13 21:45:03 LibreELEC kernel: WARNING: You are using an experimental version of the media stack.
- As the driver is backported to an older kernel, it doesn't offer
- enough quality for its usage in production.
- Use it with care.
- Latest git patches (needed if you report a bug to linux-media@vger.kernel.org):
- 4281ac91840ee79c67c7c911e82ba4fbf0a7f5a9 avl6882: Update firmware patches.
- Feb 13 21:45:03 LibreELEC systemd-udevd[270]: Process '/sbin/hdparm -E8 /dev/sr_mod' failed with exit code 2.
- Feb 13 21:45:03 LibreELEC systemd-udevd[264]: Process '/sbin/hdparm -E8 /dev/sr' failed with exit code 2.
- Feb 13 21:45:03 LibreELEC kernel: WARNING: You are using an experimental version of the media stack.
- As the driver is backported to an older kernel, it doesn't offer
- enough quality for its usage in production.
- Use it with care.
- Latest git patches (needed if you report a bug to linux-media@vger.kernel.org):
- 4281ac91840ee79c67c7c911e82ba4fbf0a7f5a9 avl6882: Update firmware patches.
- Feb 13 21:45:03 LibreELEC systemd[1]: Starting Connection service...
- Feb 13 21:45:03 LibreELEC systemd[1]: Starting Cron daemon...
- Feb 13 21:45:03 LibreELEC systemd[1]: Started unbind Framebuffer console.
- Feb 13 21:45:03 LibreELEC systemd[1]: Started Kodi clean debug logs.
- Feb 13 21:45:03 LibreELEC systemd[1]: Started Cron daemon.
- Feb 13 21:45:03 OpenELECma systemd[1]: Started OpenSSH server daemon.
- Feb 13 21:45:03 OpenELECma systemd-logind[251]: New seat seat0.
- Feb 13 21:45:03 OpenELECma systemd[1]: Started Login Service.
- Feb 13 21:45:03 OpenELECma pulseaudio[262]: W: [pulseaudio] main.c: Running in system mode, but --disallow-exit not set.
- Feb 13 21:45:03 OpenELECma pulseaudio[262]: W: [pulseaudio] main.c: Running in system mode, but --disallow-module-loading not set.
- Feb 13 21:45:03 OpenELECma pulseaudio[262]: N: [pulseaudio] main.c: Running in system mode, forcibly disabling SHM mode.
- Feb 13 21:45:03 OpenELECma pulseaudio[262]: N: [pulseaudio] main.c: Running in system mode, forcibly disabling exit idle time.
- Feb 13 21:45:03 OpenELECma pulseaudio[262]: W: [pulseaudio] main.c: Home directory of user 'root' is not '/var/run/pulse', ignoring.
- Feb 13 21:45:03 OpenELECma pulseaudio[262]: W: [pulseaudio] caps.c: Normally all extra capabilities would be dropped now, but that's impossible because PulseAudio was built without capabilities support.
- Feb 13 21:45:03 OpenELECma pulseaudio[262]: W: [pulseaudio] main.c: OK, so you are running PA in system mode. Please make sure that you actually do want to do that.
- Feb 13 21:45:03 OpenELECma pulseaudio[262]: W: [pulseaudio] main.c: Please read http://www.freedesktop.org/wiki/Software/PulseAudio/Documentation/User/WhatIsWrongWithSystemWide/ for an explanation why system mode is usually a bad idea.
- Feb 13 21:45:03 OpenELECma pulseaudio[262]: W: [pulseaudio] authkey.c: Failed to open cookie file '/var/run/pulse/.config/pulse/cookie': No such file or directory
- Feb 13 21:45:03 OpenELECma pulseaudio[262]: W: [pulseaudio] authkey.c: Failed to load authentication key '/var/run/pulse/.config/pulse/cookie': No such file or directory
- Feb 13 21:45:03 OpenELECma pulseaudio[262]: W: [pulseaudio] authkey.c: Failed to open cookie file '/var/run/pulse/.pulse-cookie': No such file or directory
- Feb 13 21:45:03 OpenELECma pulseaudio[262]: W: [pulseaudio] authkey.c: Failed to load authentication key '/var/run/pulse/.pulse-cookie': No such file or directory
- Feb 13 21:45:03 OpenELECma systemd[1]: Started Connection service.
- Feb 13 21:45:03 OpenELECma connmand[310]: Connection Manager version 1.33
- Feb 13 21:45:03 OpenELECma sshd[307]: Server listening on 0.0.0.0 port 22.
- Feb 13 21:45:03 OpenELECma sshd[307]: Server listening on :: port 22.
- Feb 13 21:45:03 OpenELECma systemd[1]: Starting Wait on network...
- Feb 13 21:45:03 OpenELECma systemd[1]: Reached target Network.
- Feb 13 21:45:03 OpenELECma systemd[1]: Starting Samba SMB Daemon...
- Feb 13 21:45:03 OpenELECma systemd[1]: Started Broadcom sdio firmware update for BCM43430A1.
- Feb 13 21:45:03 OpenELECma systemd[1]: Starting Wait for network to be configured by ConnMan...
- Feb 13 21:45:03 OpenELECma kernel: uart-pl011 3f201000.serial: no DMA platform data
- Feb 13 21:45:03 OpenELECma kernel: usb 1-1.3: dvb_usb_v2: found a 'DVBSky S960/S860' in warm state
- Feb 13 21:45:03 OpenELECma kernel: usb 1-1.3: dvb_usb_v2: will pass the complete MPEG2 transport stream to the software demuxer
- Feb 13 21:45:03 OpenELECma kernel: dvbdev: DVB: registering new adapter (DVBSky S960/S860)
- Feb 13 21:45:03 OpenELECma kernel: usb 1-1.3: dvb_usb_v2: MAC address: 00:17:42:54:96:0c
- Feb 13 21:45:03 OpenELECma kernel: i2c i2c-3: Added multiplexed i2c bus 4
- Feb 13 21:45:04 OpenELECma connmand[310]: Checking loopback interface settings
- Feb 13 21:45:04 OpenELECma connmand[310]: System hostname is OpenELECma
- Feb 13 21:45:04 OpenELECma connmand[310]: Failed to open RFKILL control device
- Feb 13 21:45:04 OpenELECma dbus[268]: [system] Activating via systemd: service name='fi.w1.wpa_supplicant1' unit='wpa_supplicant.service'
- Feb 13 21:45:04 OpenELECma connmand[310]: lo {newlink} index 1 address 00:00:00:00:00:00 mtu 65536
- Feb 13 21:45:04 OpenELECma systemd[1]: Starting WPA supplicant...
- Feb 13 21:45:04 OpenELECma connmand[310]: lo {newlink} index 1 operstate 0 <UNKNOWN>
- Feb 13 21:45:04 OpenELECma connmand[310]: eth0 {create} index 2 type 1 <ETHER>
- Feb 13 21:45:04 OpenELECma connmand[310]: eth0 {update} flags 4098 <DOWN>
- Feb 13 21:45:04 OpenELECma connmand[310]: eth0 {newlink} index 2 address B8:27:EB:A3:80:2C mtu 1500
- Feb 13 21:45:04 OpenELECma connmand[310]: eth0 {newlink} index 2 operstate 2 <DOWN>
- Feb 13 21:45:04 OpenELECma systemd[1]: Started PulseAudio Sound Service.
- Feb 13 21:45:04 OpenELECma pulseaudio[262]: E: [pulseaudio] bluez5-util.c: GetManagedObjects() failed: org.freedesktop.DBus.Error.ServiceUnknown: The name org.bluez was not provided by any .service files
- Feb 13 21:45:04 OpenELECma kernel: ts2020 4-0060: Montage Technology TS2022 successfully identified
- Feb 13 21:45:04 OpenELECma kernel: usb 1-1.3: DVB: registering adapter 0 frontend 0 (Montage Technology M88DS3103)...
- Feb 13 21:45:04 OpenELECma kernel: rc rc0: DVBSky S960/S860 as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.3/rc/rc0
- Feb 13 21:45:04 OpenELECma kernel: Registered IR keymap rc-dvbsky
- Feb 13 21:45:04 OpenELECma kernel: input: DVBSky S960/S860 as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.3/rc/rc0/input2
- Feb 13 21:45:04 OpenELECma kernel: usb 1-1.3: dvb_usb_v2: schedule remote query interval to 300 msecs
- Feb 13 21:45:04 OpenELECma kernel: usb 1-1.3: dvb_usb_v2: 'DVBSky S960/S860' successfully initialized and connected
- Feb 13 21:45:04 OpenELECma kernel: usbcore: registered new interface driver dvb_usb_dvbsky
- Feb 13 21:45:04 OpenELECma kernel: gpiomem-bcm2835 3f200000.gpiomem: Initialised: Registers at 0x3f200000
- Feb 13 21:45:04 OpenELECma connmand[310]: Adding interface eth0 [ ethernet ]
- Feb 13 21:45:04 OpenELECma connmand[310]: eth0 {update} flags 36867 <UP>
- Feb 13 21:45:04 OpenELECma kernel: smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup
- Feb 13 21:45:04 OpenELECma kernel: IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
- Feb 13 21:45:04 OpenELECma connmand[310]: eth0 {newlink} index 2 address B8:27:EB:A3:80:2C mtu 1500
- Feb 13 21:45:04 OpenELECma connmand[310]: eth0 {newlink} index 2 operstate 2 <DOWN>
- Feb 13 21:45:04 OpenELECma dbus[268]: [system] Successfully activated service 'fi.w1.wpa_supplicant1'
- Feb 13 21:45:04 OpenELECma systemd-udevd[270]: Process '/bin/sh -c 'echo enabled >/sys/class/net/eth0/device/power/wakeup' ' failed with exit code 1.
- Feb 13 21:45:04 OpenELECma systemd[1]: Started WPA supplicant.
- Feb 13 21:45:04 OpenELECma wpa_supplicant[340]: Successfully initialized wpa_supplicant
- Feb 13 21:45:04 OpenELECma smbd[336]: [2017/02/13 21:45:04.535610, 0] /home/neil/projects/scratch/alternates/LibreELEC.tv/build.LibreELEC-RPi2.arm-9.0-devel-next/samba-3.6.25/source3/smbd/server.c:1130(smbd_main)
- Feb 13 21:45:04 OpenELECma smbd[336]: standard input is not a socket, assuming -D option
- Feb 13 21:45:04 OpenELECma systemd[1]: smbd.service: PID file /var/run/smbd-smb.conf.pid not readable (yet?) after start: No such file or directory
- Feb 13 21:45:04 OpenELECma systemd[1]: Started Samba SMB Daemon.
- Feb 13 21:45:04 OpenELECma systemd[1]: Starting Samba NMB Daemon...
- Feb 13 21:45:04 OpenELECma smbd[378]: [2017/02/13 21:45:04.546514, 0] /home/neil/projects/scratch/alternates/LibreELEC.tv/build.LibreELEC-RPi2.arm-9.0-devel-next/samba-3.6.25/source3/passdb/pdb_smbpasswd.c:248(startsmbfilepwent)
- Feb 13 21:45:04 OpenELECma smbd[378]: startsmbfilepwent_internal: file /var/run/smbpasswd did not exist. File successfully created.
- Feb 13 21:45:04 OpenELECma kernel: usbcore: registered new interface driver snd-usb-audio
- Feb 13 21:45:04 OpenELECma systemd[1]: Reached target Sound Card.
- Feb 13 21:45:04 OpenELECma systemd[1]: nmbd.service: PID file /var/run/nmbd-smb.conf.pid not readable (yet?) after start: No such file or directory
- Feb 13 21:45:04 OpenELECma systemd[1]: Started Samba NMB Daemon.
- Feb 13 21:45:04 OpenELECma Boot[415]: ### Setting up sound card ###
- Feb 13 21:45:04 OpenELECma systemd[1]: Created slice system-udevil\x2dmount.slice.
- Feb 13 21:45:04 OpenELECma systemd[1]: Starting Udevil mount service...
- Feb 13 21:45:04 OpenELECma systemd[1]: Starting Udevil mount service...
- Feb 13 21:45:04 OpenELECma udevil[474]: udevil: denied 92: device /dev/mmcblk0p1 is already mounted (or specify mount point)
- Feb 13 21:45:04 OpenELECma udevil[475]: udevil: denied 92: device /dev/mmcblk0p2 is already mounted (or specify mount point)
- Feb 13 21:45:04 OpenELECma systemd[1]: Started Udevil mount service.
- Feb 13 21:45:04 OpenELECma systemd[1]: Started Udevil mount service.
- Feb 13 21:45:05 OpenELECma connmand[310]: eth0 {add} route ff00:: gw :: scope 0 <UNIVERSE>
- Feb 13 21:45:05 OpenELECma kernel: IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
- Feb 13 21:45:05 OpenELECma kernel: smsc95xx 1-1.1:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0xC5E1
- Feb 13 21:45:05 OpenELECma connmand[310]: eth0 {add} route fe80:: gw :: scope 0 <UNIVERSE>
- Feb 13 21:45:05 OpenELECma connmand[310]: eth0 {update} flags 102467 <UP,RUNNING,LOWER_UP>
- Feb 13 21:45:05 OpenELECma connmand[310]: eth0 {newlink} index 2 address B8:27:EB:A3:80:2C mtu 1500
- Feb 13 21:45:05 OpenELECma connmand[310]: eth0 {newlink} index 2 operstate 6 <UP>
- Feb 13 21:45:05 OpenELECma kernel: 8021q: 802.1Q VLAN Support v1.8
- Feb 13 21:45:05 OpenELECma connmand[310]: Skipping disconnect of carrier, network is connecting.
- Feb 13 21:45:06 OpenELECma connmand[310]: ipconfig state 3 ipconfig method 1
- Feb 13 21:45:06 OpenELECma connmand[310]: eth0 {del} route fe80:: gw :: scope 0 <UNIVERSE>
- Feb 13 21:45:06 OpenELECma connmand[310]: eth0 {del} route ff00:: gw :: scope 0 <UNIVERSE>
- Feb 13 21:45:06 OpenELECma connmand[310]: eth0 {add} address 192.168.1.224/24 label eth0 family 2
- Feb 13 21:45:06 OpenELECma connmand[310]: eth0 {add} route 192.168.1.0 gw 0.0.0.0 scope 253 <LINK>
- Feb 13 21:45:06 OpenELECma systemd[1]: Started Wait for network to be configured by ConnMan.
- Feb 13 21:45:06 OpenELECma connmand[310]: eth0 {add} route 192.168.1.1 gw 0.0.0.0 scope 253 <LINK>
- Feb 13 21:45:06 OpenELECma systemd[1]: Started Wait on network.
- Feb 13 21:45:06 OpenELECma connmand[310]: eth0 {add} route 0.0.0.0 gw 192.168.1.1 scope 0 <UNIVERSE>
- Feb 13 21:45:06 OpenELECma systemd[1]: Started OSCam.
- Feb 13 21:45:06 OpenELECma systemd[1]: Started TVHeadend42 Service.
- Feb 13 21:45:06 OpenELECma systemd[1]: Started Kodi usage tracking script.
- Feb 13 21:45:06 OpenELECma systemd[1]: Reached target Multi-User System.
- Feb 13 21:45:06 OpenELECma systemd[1]: Reached target Graphical Interface.
- Feb 13 21:45:06 OpenELECma systemd[1]: Reached target Network is Online.
- Feb 13 21:45:06 OpenELECma systemd[1]: Starting Kodi Media Center...
- Feb 13 21:45:06 OpenELECma connmand[310]: ntp: time slew +390245.459927 s
- Feb 18 10:09:11 OpenELECma systemd[1]: Time has been changed
- Feb 18 10:09:12 OpenELECma systemd[1]: Started Kodi Media Center.
- Feb 18 10:09:12 OpenELECma systemd[1]: Reached target Kodi Mediacenter Interface.
- Feb 18 10:09:12 OpenELECma systemd[1]: Startup finished in 2.239s (kernel) + 4.640s (userspace) = 6.880s.
- Feb 18 10:09:12 OpenELECma connmand[310]: eth0 {add} route 82.165.8.211 gw 192.168.1.1 scope 0 <UNIVERSE>
- Feb 18 10:09:12 OpenELECma connmand[310]: eth0 {del} route 82.165.8.211 gw 192.168.1.1 scope 0 <UNIVERSE>
- Feb 18 10:09:12 OpenELECma connmand[310]: ntp: time slew -0.002997 s
- Feb 18 10:09:12 OpenELECma tvheadend[590]: main: Log started
- Feb 18 10:09:12 OpenELECma tvheadend[590]: http: Starting HTTP server 0.0.0.0:9981
- Feb 18 10:09:12 OpenELECma tvheadend[590]: htsp: Starting HTSP server 0.0.0.0:9982
- Feb 18 10:09:12 OpenELECma tvheadend[590]: satips: use --satip_bindaddr parameter to select the local IP for SAT>IP
- Feb 18 10:09:12 OpenELECma tvheadend[590]: satips: using Google lookup (might block the task until timeout)
- Feb 18 10:09:12 OpenELECma tvheadend[590]: config: loaded
- Feb 18 10:09:12 OpenELECma tvheadend[590]: config: scanfile (re)initialization with path <none>
- Feb 18 10:09:12 OpenELECma kernel: m88ds3103 3-0068: found a 'Montage Technology M88DS3103' in cold state
- Feb 18 10:09:12 OpenELECma kernel: m88ds3103 3-0068: downloading firmware from file 'dvb-demod-m88ds3103.fw'
- Feb 18 10:09:13 OpenELECma tvheadend[590]: scanfile: DVB-S - loaded 1 regions with 112 networks
- Feb 18 10:09:13 OpenELECma tvheadend[590]: scanfile: DVB-T - loaded 43 regions with 1106 networks
- Feb 18 10:09:13 OpenELECma tvheadend[590]: scanfile: DVB-C - loaded 17 regions with 56 networks
- Feb 18 10:09:13 OpenELECma tvheadend[590]: scanfile: ATSC-T - loaded 2 regions with 9 networks
- Feb 18 10:09:13 OpenELECma tvheadend[590]: scanfile: ATSC-C - loaded 1 regions with 5 networks
- Feb 18 10:09:13 OpenELECma tvheadend[590]: scanfile: ISDB-T - loaded 2 regions with 1297 networks
- Feb 18 10:09:13 OpenELECma kernel: m88ds3103 3-0068: found a 'Montage Technology M88DS3103' in warm state
- Feb 18 10:09:13 OpenELECma kernel: m88ds3103 3-0068: firmware version: 3.B
- Feb 18 10:09:13 OpenELECma kernel: usb 1-1.3: DVB: adapter 0 frontend 0 frequency 0 out of range (950000..2150000)
- Feb 18 10:09:13 OpenELECma tvheadend[590]: linuxdvb: adapter added /dev/dvb/adapter0
- Feb 18 10:09:14 OpenELECma tvheadend[590]: dvr: Creating new configuration ''
- Feb 18 10:09:14 OpenELECma tvheadend[590]: descrambler: adding CAID 2600 as constant crypto-word (BISS)
- Feb 18 10:09:14 OpenELECma tvheadend[590]: epggrab: module eit created
- Feb 18 10:09:14 OpenELECma tvheadend[590]: epggrab: module uk_freesat created
- Feb 18 10:09:14 OpenELECma tvheadend[590]: epggrab: module uk_freeview created
- Feb 18 10:09:14 OpenELECma tvheadend[590]: epggrab: module viasat_baltic created
- Feb 18 10:09:14 OpenELECma tvheadend[590]: epggrab: module Bulsatcom_39E created
- Feb 18 10:09:14 OpenELECma tvheadend[590]: epggrab: module psip created
- Feb 18 10:09:14 OpenELECma tvheadend[590]: capmt: CA client 1 active
- Feb 18 10:09:14 OpenELECma tvheadend[590]: capmt: CA client 1: mode 3 connected to Localhost:9000 (single)
- Feb 18 10:09:14 OpenELECma tvheadend[590]: epggrab: module opentv-ausat created
- Feb 18 10:09:14 OpenELECma tvheadend[590]: epggrab: module opentv-skyuk created
- Feb 18 10:09:14 OpenELECma tvheadend[590]: epggrab: module opentv-skyit created
- Feb 18 10:09:14 OpenELECma tvheadend[590]: epggrab: module opentv-skynz created
- Feb 18 10:09:14 OpenELECma tvheadend[590]: epggrab: module pyepg created
- Feb 18 10:09:14 OpenELECma tvheadend[590]: epggrab: module xmltv created
- Feb 18 10:09:14 OpenELECma tvheadend[590]: spawn: Executing "/storage/.kodi/addons/service.tvheadend42/bin/tv_grab_file"
- Feb 18 10:09:14 OpenELECma tvheadend[590]: epggrab: module /storage/.kodi/addons/service.tvheadend42/bin/tv_grab_file created
- Feb 18 10:09:14 OpenELECma kernel: Bluetooth: Core ver 2.22
- Feb 18 10:09:14 OpenELECma kernel: NET: Registered protocol family 31
- Feb 18 10:09:14 OpenELECma kernel: Bluetooth: HCI device and connection manager initialized
- Feb 18 10:09:14 OpenELECma kernel: Bluetooth: HCI socket layer initialized
- Feb 18 10:09:14 OpenELECma kernel: Bluetooth: L2CAP socket layer initialized
- Feb 18 10:09:14 OpenELECma kernel: Bluetooth: SCO socket layer initialized
- Feb 18 10:09:14 OpenELECma kernel: Bluetooth: HCI UART driver ver 2.3
- Feb 18 10:09:14 OpenELECma kernel: Bluetooth: HCI UART protocol H4 registered
- Feb 18 10:09:14 OpenELECma kernel: Bluetooth: HCI UART protocol Three-wire (H5) registered
- Feb 18 10:09:14 OpenELECma kernel: Bluetooth: HCI UART protocol Broadcom registered
- Feb 18 10:09:14 OpenELECma hciattach[313]: bcm43xx_init
- Feb 18 10:09:14 OpenELECma hciattach[313]: Flash firmware /etc/firmware/brcm/BCM43430A1.hcd
- Feb 18 10:09:14 OpenELECma hciattach[313]: Set Controller UART speed to 921600 bit/s
- Feb 18 10:09:14 OpenELECma hciattach[313]: Device setup complete
- Feb 18 10:09:14 OpenELECma systemd[1]: Reached target Bluetooth.
- Feb 18 10:09:14 OpenELECma tvheadend[590]: epgdb: gzip format detected, inflating (ratio 19.2% deflated size 748913)
- Feb 18 10:09:14 OpenELECma tvheadend[590]: epgdb: parsing 3903054 bytes
- Feb 18 10:09:14 OpenELECma tvheadend[590]: epgdb: loaded v2
- Feb 18 10:09:14 OpenELECma tvheadend[590]: epgdb: config 1
- Feb 18 10:09:14 OpenELECma tvheadend[590]: epgdb: brands 0
- Feb 18 10:09:14 OpenELECma tvheadend[590]: epgdb: seasons 0
- Feb 18 10:09:14 OpenELECma tvheadend[590]: epgdb: episodes 4965
- Feb 18 10:09:14 OpenELECma tvheadend[590]: epgdb: broadcasts 4964
- Feb 18 10:09:14 OpenELECma tvheadend[590]: START: HTS Tvheadend version 4.1.2415 ~ LibreELEC Tvh-addon v9.0.109-#0213-milhouse-v4.1-2426-gef89ef8 started, running as PID:590 UID:0 GID:39, CWD:/ CNF:/storage/.kodi/userdata/addon_data/service.tvheadend42
- Feb 18 10:09:15 OpenELECma tvheadend[590]: mpegts: 11797.5H in 23E - tuning on Montage Technology M88DS3103 : DVB-S #0
- Feb 18 10:09:15 OpenELECma tvheadend[590]: subscription: 0001: "epggrab" subscribing to mux "11797.5H", weight: 4, adapter: "Montage Technology M88DS3103 : DVB-S #0", network: "23E", service: "Raw PID Subscription"
- Feb 18 10:09:17 OpenELECma kernel: hrtimer: interrupt took 31807 ns
- Feb 18 10:09:17 OpenELECma tvheadend[590]: htsp: Got connection from 127.0.0.1
- Feb 18 10:09:17 OpenELECma tvheadend[590]: htsp: 127.0.0.1: Welcomed client software: Kodi Media Center (HTSPv26)
- Feb 18 10:09:17 OpenELECma tvheadend[590]: htsp: 127.0.0.1 [ Kodi Media Center ]: Identified as user ''
- Feb 18 10:09:18 OpenELECma tvheadend[590]: http: 127.0.0.1: HTTP/1.1 HEAD /imagecache/17 -- 404
- Feb 18 10:09:18 OpenELECma tvheadend[590]: http: 127.0.0.1: HTTP/1.1 HEAD /imagecache/12 -- 404
- Feb 18 10:09:18 OpenELECma tvheadend[590]: http: 127.0.0.1: HTTP/1.1 HEAD /imagecache/15 -- 404
- Feb 18 10:09:18 OpenELECma tvheadend[590]: http: 127.0.0.1: HTTP/1.1 HEAD /imagecache/4 -- 404
- Feb 18 10:09:18 OpenELECma tvheadend[590]: http: 127.0.0.1: HTTP/1.1 HEAD /imagecache/11 -- 404
- Feb 18 10:09:18 OpenELECma tvheadend[590]: http: 127.0.0.1: HTTP/1.1 HEAD /imagecache/7 -- 404
- Feb 18 10:09:18 OpenELECma tvheadend[590]: http: 127.0.0.1: HTTP/1.1 HEAD /imagecache/9 -- 404
- Feb 18 10:09:18 OpenELECma tvheadend[590]: http: 127.0.0.1: HTTP/1.1 HEAD /imagecache/13 -- 404
- Feb 18 10:09:18 OpenELECma tvheadend[590]: http: 127.0.0.1: HTTP/1.1 HEAD /imagecache/14 -- 404
- Feb 18 10:09:19 OpenELECma tvheadend[590]: http: 127.0.0.1: HTTP/1.1 HEAD /imagecache/2 -- 404
- Feb 18 10:09:27 OpenELECma kodi.sh[645]: hwclock: can't open '/dev/misc/rtc': No such file or directory
- Feb 18 10:09:33 OpenELECma tvheadend[590]: mpegts: 12605H in 23E - tuning on Montage Technology M88DS3103 : DVB-S #0
- Feb 18 10:09:33 OpenELECma tvheadend[590]: subscription: 0001: "epggrab" unsubscribing
- Feb 18 10:09:33 OpenELECma tvheadend[590]: subscription: 0003: "scan" subscribing to mux "12605H", weight: 6, adapter: "Montage Technology M88DS3103 : DVB-S #0", network: "23E", service: "Raw PID Subscription"
- Feb 18 10:09:43 OpenELECma tvheadend[590]: mpegts: 12605H in 23E - scan no data, failed
- Feb 18 10:09:43 OpenELECma tvheadend[590]: subscription: 0003: "scan" unsubscribing
- Feb 18 10:09:43 OpenELECma tvheadend[590]: mpegts: 12031.5H in 23E - tuning on Montage Technology M88DS3103 : DVB-S #0
- Feb 18 10:09:44 OpenELECma tvheadend[590]: subscription: 0006: "scan" subscribing to mux "12031.5H", weight: 6, adapter: "Montage Technology M88DS3103 : DVB-S #0", network: "23E", service: "Raw PID Subscription"
- Feb 18 10:09:53 OpenELECma tvheadend[590]: mpegts: 12031.5H in 23E scan complete
- Feb 18 10:09:53 OpenELECma tvheadend[590]: subscription: 0006: "scan" unsubscribing
- Feb 18 10:09:53 OpenELECma tvheadend[590]: mpegts: 12382.5H in 23E - tuning on Montage Technology M88DS3103 : DVB-S #0
- Feb 18 10:09:53 OpenELECma tvheadend[590]: subscription: 0009: "scan" subscribing to mux "12382.5H", weight: 6, adapter: "Montage Technology M88DS3103 : DVB-S #0", network: "23E", service: "Raw PID Subscription"
- Feb 18 10:10:03 OpenELECma tvheadend[590]: mpegts: 12382.5H in 23E scan complete
- Feb 18 10:10:03 OpenELECma tvheadend[590]: subscription: 0009: "scan" unsubscribing
- Feb 18 10:10:03 OpenELECma tvheadend[590]: mpegts: 10788V in 23E - tuning on Montage Technology M88DS3103 : DVB-S #0
- Feb 18 10:10:04 OpenELECma tvheadend[590]: subscription: 000C: "scan" subscribing to mux "10788V", weight: 6, adapter: "Montage Technology M88DS3103 : DVB-S #0", network: "23E", service: "Raw PID Subscription"
- Feb 18 10:10:06 OpenELECma crond[297]: time disparity of 6505 minutes detected
- Feb 18 10:10:14 OpenELECma tvheadend[590]: mpegts: 10788V in 23E - scan no data, failed
- Feb 18 10:10:14 OpenELECma tvheadend[590]: subscription: 000C: "scan" unsubscribing
- Feb 18 10:10:14 OpenELECma tvheadend[590]: mpegts: 11592V in 23E - tuning on Montage Technology M88DS3103 : DVB-S #0
- Feb 18 10:10:14 OpenELECma tvheadend[590]: subscription: 000F: "scan" subscribing to mux "11592V", weight: 6, adapter: "Montage Technology M88DS3103 : DVB-S #0", network: "23E", service: "Raw PID Subscription"
- Feb 18 10:10:24 OpenELECma tvheadend[590]: mpegts: 11592V in 23E - scan no data, failed
- Feb 18 10:10:24 OpenELECma tvheadend[590]: subscription: 000F: "scan" unsubscribing
- Feb 18 10:10:24 OpenELECma tvheadend[590]: mpegts: 12148.5H in 23E - tuning on Montage Technology M88DS3103 : DVB-S #0
- Feb 18 10:10:24 OpenELECma tvheadend[590]: subscription: 0012: "scan" subscribing to mux "12148.5H", weight: 6, adapter: "Montage Technology M88DS3103 : DVB-S #0", network: "23E", service: "Raw PID Subscription"
- Feb 18 10:10:33 OpenELECma tvheadend[590]: tbl-base: pat: 12148.5H in 23E: invalid checksum (len 4098, errors 1)
- Feb 18 10:10:34 OpenELECma tvheadend[590]: mpegts: 12148.5H in 23E scan complete
- Feb 18 10:10:34 OpenELECma tvheadend[590]: subscription: 0012: "scan" unsubscribing
- Feb 18 10:10:34 OpenELECma tvheadend[590]: mpegts: 11875H in 23E - tuning on Montage Technology M88DS3103 : DVB-S #0
- Feb 18 10:10:34 OpenELECma tvheadend[590]: subscription: 0015: "scan" subscribing to mux "11875H", weight: 6, adapter: "Montage Technology M88DS3103 : DVB-S #0", network: "23E", service: "Raw PID Subscription"
- Feb 18 10:10:44 OpenELECma tvheadend[590]: mpegts: 11875H in 23E - scan no data, failed
- Feb 18 10:10:44 OpenELECma tvheadend[590]: subscription: 0015: "scan" unsubscribing
- Feb 18 10:10:44 OpenELECma tvheadend[590]: mpegts: 12525V in 23E - tuning on Montage Technology M88DS3103 : DVB-S #0
- Feb 18 10:10:45 OpenELECma tvheadend[590]: subscription: 0018: "scan" subscribing to mux "12525V", weight: 6, adapter: "Montage Technology M88DS3103 : DVB-S #0", network: "23E", service: "Raw PID Subscription"
- Feb 18 10:10:52 OpenELECma tvheadend[590]: linuxdvb: Montage Technology M88DS3103 : DVB-S #0 - poll TIMEOUT
- Feb 18 10:10:55 OpenELECma tvheadend[590]: mpegts: 12525V in 23E - scan no data, failed
- Feb 18 10:10:55 OpenELECma tvheadend[590]: subscription: 0018: "scan" unsubscribing
- Feb 18 10:10:55 OpenELECma tvheadend[590]: mpegts: 12363V in 23E - tuning on Montage Technology M88DS3103 : DVB-S #0
- Feb 18 10:10:55 OpenELECma tvheadend[590]: diseqc: failed to send diseqc cmd (e=Connection timed out)
- Feb 18 10:10:55 OpenELECma tvheadend[590]: mpegts: 12168V in 23E - tuning on Montage Technology M88DS3103 : DVB-S #0
- Feb 18 10:10:55 OpenELECma tvheadend[590]: diseqc: failed to send diseqc cmd (e=Connection timed out)
- Feb 18 10:10:55 OpenELECma tvheadend[590]: mpegts: 12565V in 23E - tuning on Montage Technology M88DS3103 : DVB-S #0
- Feb 18 10:10:55 OpenELECma tvheadend[590]: diseqc: failed to send diseqc cmd (e=Connection timed out)
- Feb 18 10:10:55 OpenELECma tvheadend[590]: mpegts: 11836H in 23E - tuning on Montage Technology M88DS3103 : DVB-S #0
- Feb 18 10:10:55 OpenELECma tvheadend[590]: diseqc: failed to send diseqc cmd (e=Connection timed out)
- Feb 18 10:10:55 OpenELECma tvheadend[590]: mpegts: 12630V in 23E - tuning on Montage Technology M88DS3103 : DVB-S #0
- Feb 18 10:10:56 OpenELECma tvheadend[590]: diseqc: failed to send diseqc cmd (e=Connection timed out)
- Feb 18 10:10:56 OpenELECma tvheadend[590]: mpegts: 11515V in 23E - tuning on Montage Technology M88DS3103 : DVB-S #0
- Feb 18 10:10:56 OpenELECma tvheadend[590]: diseqc: failed to send diseqc cmd (e=Connection timed out)
- Feb 18 10:10:56 OpenELECma tvheadend[590]: mpegts: 11914.5H in 23E - tuning on Montage Technology M88DS3103 : DVB-S #0
- Feb 18 10:10:56 OpenELECma tvheadend[590]: diseqc: failed to send diseqc cmd (e=Connection timed out)
- Feb 18 10:10:56 OpenELECma tvheadend[590]: mpegts: 12696H in 23E - tuning on Montage Technology M88DS3103 : DVB-S #0
- Feb 18 10:10:56 OpenELECma tvheadend[590]: diseqc: failed to send diseqc cmd (e=Connection timed out)
- Feb 18 10:10:56 OpenELECma tvheadend[590]: mpegts: 11635H in 23E - tuning on Montage Technology M88DS3103 : DVB-S #0
- Feb 18 10:10:57 OpenELECma tvheadend[590]: diseqc: failed to send diseqc cmd (e=Connection timed out)
- Feb 18 10:10:57 OpenELECma tvheadend[590]: mpegts: 11856V in 23E - tuning on Montage Technology M88DS3103 : DVB-S #0
- Feb 18 10:10:57 OpenELECma tvheadend[590]: diseqc: failed to send diseqc cmd (e=Connection timed out)
- Feb 18 10:10:57 OpenELECma tvheadend[590]: mpegts: 11778V in 23E - tuning on Montage Technology M88DS3103 : DVB-S #0
- Feb 18 10:10:57 OpenELECma tvheadend[590]: diseqc: failed to send diseqc cmd (e=Connection timed out)
- Feb 18 10:10:57 OpenELECma tvheadend[590]: mpegts: 12343.5H in 23E - tuning on Montage Technology M88DS3103 : DVB-S #0
- Feb 18 10:10:57 OpenELECma tvheadend[590]: diseqc: failed to send diseqc cmd (e=Connection timed out)
- Feb 18 10:10:57 OpenELECma tvheadend[590]: mpegts: 12565H in 23E - tuning on Montage Technology M88DS3103 : DVB-S #0
- Feb 18 10:10:57 OpenELECma tvheadend[590]: diseqc: failed to send diseqc cmd (e=Connection timed out)
- Feb 18 10:10:57 OpenELECma tvheadend[590]: mpegts: 12109.5H in 23E - tuning on Montage Technology M88DS3103 : DVB-S #0
- Feb 18 10:10:58 OpenELECma tvheadend[590]: diseqc: failed to send diseqc cmd (e=Connection timed out)
- Feb 18 10:10:58 OpenELECma tvheadend[590]: mpegts: 11856V in 23E - tuning on Montage Technology M88DS3103 : DVB-S #0
- Feb 18 10:10:58 OpenELECma tvheadend[590]: diseqc: failed to send diseqc cmd (e=Connection timed out)
- Feb 18 10:10:58 OpenELECma tvheadend[590]: mpegts: 12641H in 23E - tuning on Montage Technology M88DS3103 : DVB-S #0
- Feb 18 10:10:58 OpenELECma tvheadend[590]: diseqc: failed to send diseqc cmd (e=Connection timed out)
- Feb 18 10:10:58 OpenELECma tvheadend[590]: mpegts: 11973V in 23E - tuning on Montage Technology M88DS3103 : DVB-S #0
- Feb 18 10:10:58 OpenELECma tvheadend[590]: diseqc: failed to send diseqc cmd (e=Connection timed out)
- Feb 18 10:10:58 OpenELECma tvheadend[590]: mpegts: 12187.5H in 23E - tuning on Montage Technology M88DS3103 : DVB-S #0
- Feb 18 10:10:58 OpenELECma tvheadend[590]: diseqc: failed to send diseqc cmd (e=Connection timed out)
- Feb 18 10:10:58 OpenELECma tvheadend[590]: mpegts: 12090V in 23E - tuning on Montage Technology M88DS3103 : DVB-S #0
- Feb 18 10:10:59 OpenELECma tvheadend[590]: diseqc: failed to send diseqc cmd (e=Connection timed out)
- Feb 18 10:10:59 OpenELECma tvheadend[590]: mpegts: 10862H in 23E - tuning on Montage Technology M88DS3103 : DVB-S #0
- Feb 18 10:10:59 OpenELECma tvheadend[590]: diseqc: failed to send diseqc cmd (e=Connection timed out)
- Feb 18 10:10:59 OpenELECma tvheadend[590]: mpegts: 11876H in 23E - tuning on Montage Technology M88DS3103 : DVB-S #0
- Feb 18 10:10:59 OpenELECma tvheadend[590]: diseqc: failed to send diseqc cmd (e=Connection timed out)
- Feb 18 10:10:59 OpenELECma tvheadend[590]: mpegts: 12129V in 23E - tuning on Montage Technology M88DS3103 : DVB-S #0
- Feb 18 10:10:59 OpenELECma tvheadend[590]: diseqc: failed to send diseqc cmd (e=Connection timed out)
- Feb 18 10:10:59 OpenELECma tvheadend[590]: mpegts: 11758.5H in 23E - tuning on Montage Technology M88DS3103 : DVB-S #0
- Feb 18 10:11:00 OpenELECma tvheadend[590]: diseqc: failed to send diseqc cmd (e=Connection timed out)
- Feb 18 10:11:00 OpenELECma tvheadend[590]: mpegts: 11739V in 23E - tuning on Montage Technology M88DS3103 : DVB-S #0
- Feb 18 10:11:00 OpenELECma tvheadend[590]: diseqc: failed to send diseqc cmd (e=Connection timed out)
- Feb 18 10:11:00 OpenELECma tvheadend[590]: mpegts: 12631H in 23E - tuning on Montage Technology M88DS3103 : DVB-S #0
- Feb 18 10:11:00 OpenELECma tvheadend[590]: diseqc: failed to send diseqc cmd (e=Connection timed out)
- Feb 18 10:11:00 OpenELECma tvheadend[590]: mpegts: 12649H in 23E - tuning on Montage Technology M88DS3103 : DVB-S #0
- Feb 18 10:11:00 OpenELECma tvheadend[590]: diseqc: failed to send diseqc cmd (e=Connection timed out)
- Feb 18 10:11:00 OpenELECma tvheadend[590]: mpegts: 12725V in 23E - tuning on Montage Technology M88DS3103 : DVB-S #0
- Feb 18 10:11:01 OpenELECma tvheadend[590]: diseqc: failed to send diseqc cmd (e=Connection timed out)
- Feb 18 10:11:01 OpenELECma tvheadend[590]: mpegts: 12685V in 23E - tuning on Montage Technology M88DS3103 : DVB-S #0
- Feb 18 10:11:01 OpenELECma tvheadend[590]: diseqc: failed to send diseqc cmd (e=Connection timed out)
- Feb 18 10:11:01 OpenELECma tvheadend[590]: mpegts: 11719.5H in 23E - tuning on Montage Technology M88DS3103 : DVB-S #0
- Feb 18 10:11:01 OpenELECma tvheadend[590]: diseqc: failed to send diseqc cmd (e=Connection timed out)
- Feb 18 10:11:01 OpenELECma tvheadend[590]: mpegts: 12605V in 23E - tuning on Montage Technology M88DS3103 : DVB-S #0
- Feb 18 10:11:01 OpenELECma tvheadend[590]: diseqc: failed to send diseqc cmd (e=Connection timed out)
- Feb 18 10:11:01 OpenELECma tvheadend[590]: mpegts: 12525H in 23E - tuning on Montage Technology M88DS3103 : DVB-S #0
- Feb 18 10:11:01 OpenELECma tvheadend[590]: diseqc: failed to send diseqc cmd (e=Connection timed out)
- Feb 18 10:11:01 OpenELECma tvheadend[590]: mpegts: 10758V in 23E - tuning on Montage Technology M88DS3103 : DVB-S #0
- Feb 18 10:11:02 OpenELECma tvheadend[590]: diseqc: failed to send diseqc cmd (e=Connection timed out)
- Feb 18 10:11:02 OpenELECma tvheadend[590]: mpegts: 11555H in 23E - tuning on Montage Technology M88DS3103 : DVB-S #0
- Feb 18 10:11:02 OpenELECma tvheadend[590]: diseqc: failed to send diseqc cmd (e=Connection timed out)
- Feb 18 10:11:02 OpenELECma tvheadend[590]: mpegts: 11515H in 23E - tuning on Montage Technology M88DS3103 : DVB-S #0
- Feb 18 10:11:02 OpenELECma tvheadend[590]: diseqc: failed to send diseqc cmd (e=Connection timed out)
- Feb 18 10:11:02 OpenELECma tvheadend[590]: mpegts: 12032H in 23E - tuning on Montage Technology M88DS3103 : DVB-S #0
- Feb 18 10:11:02 OpenELECma tvheadend[590]: diseqc: failed to send diseqc cmd (e=Connection timed out)
- Feb 18 10:11:02 OpenELECma tvheadend[590]: mpegts: 12725.5H in 23E - tuning on Montage Technology M88DS3103 : DVB-S #0
- Feb 18 10:11:02 OpenELECma tvheadend[590]: diseqc: failed to send diseqc cmd (e=Connection timed out)
- Feb 18 10:11:02 OpenELECma tvheadend[590]: mpegts: 11798H in 23E - tuning on Montage Technology M88DS3103 : DVB-S #0
- Feb 18 10:11:03 OpenELECma tvheadend[590]: diseqc: failed to send diseqc cmd (e=Connection timed out)
- Feb 18 10:11:03 OpenELECma tvheadend[590]: mpegts: 12343.5H in 23E - tuning on Montage Technology M88DS3103 : DVB-S #0
- Feb 18 10:11:03 OpenELECma tvheadend[590]: diseqc: failed to send diseqc cmd (e=Connection timed out)
- Feb 18 10:11:03 OpenELECma tvheadend[590]: mpegts: 12109H in 23E - tuning on Montage Technology M88DS3103 : DVB-S #0
- Feb 18 10:11:03 OpenELECma tvheadend[590]: diseqc: failed to send diseqc cmd (e=Connection timed out)
- Feb 18 10:11:03 OpenELECma tvheadend[590]: mpegts: 12382.5H in 23E - tuning on Montage Technology M88DS3103 : DVB-S #0
- Feb 18 10:11:03 OpenELECma tvheadend[590]: diseqc: failed to send diseqc cmd (e=Connection timed out)
- Feb 18 10:11:03 OpenELECma tvheadend[590]: mpegts: 12644H in 23E - tuning on Montage Technology M88DS3103 : DVB-S #0
- Feb 18 10:11:04 OpenELECma tvheadend[590]: diseqc: failed to send diseqc cmd (e=Connection timed out)
- Feb 18 10:11:04 OpenELECma tvheadend[590]: mpegts: 12304.5H in 23E - tuning on Montage Technology M88DS3103 : DVB-S #0
- Feb 18 10:11:04 OpenELECma tvheadend[590]: diseqc: failed to send diseqc cmd (e=Connection timed out)
- Feb 18 10:11:04 OpenELECma tvheadend[590]: mpegts: 10802H in 23E - tuning on Montage Technology M88DS3103 : DVB-S #0
- Feb 18 10:11:04 OpenELECma tvheadend[590]: diseqc: failed to send diseqc cmd (e=Connection timed out)
- Feb 18 10:11:04 OpenELECma tvheadend[590]: mpegts: 12525H in 23E - tuning on Montage Technology M88DS3103 : DVB-S #0
- Feb 18 10:11:04 OpenELECma tvheadend[590]: diseqc: failed to send diseqc cmd (e=Connection timed out)
- Feb 18 10:11:04 OpenELECma tvheadend[590]: mpegts: 11595H in 23E - tuning on Montage Technology M88DS3103 : DVB-S #0
- Feb 18 10:11:04 OpenELECma tvheadend[590]: diseqc: failed to send diseqc cmd (e=Connection timed out)
- Feb 18 10:11:04 OpenELECma tvheadend[590]: mpegts: 11719H in 23E - tuning on Montage Technology M88DS3103 : DVB-S #0
- Feb 18 10:11:05 OpenELECma tvheadend[590]: diseqc: failed to send diseqc cmd (e=Connection timed out)
- Feb 18 10:11:05 OpenELECma tvheadend[590]: mpegts: 11875.5H in 23E - tuning on Montage Technology M88DS3103 : DVB-S #0
- Feb 18 10:11:05 OpenELECma tvheadend[590]: diseqc: failed to send diseqc cmd (e=Connection timed out)
- Feb 18 10:11:05 OpenELECma tvheadend[590]: mpegts: 11817V in 23E - tuning on Montage Technology M88DS3103 : DVB-S #0
- Feb 18 10:11:05 OpenELECma tvheadend[590]: diseqc: failed to send diseqc cmd (e=Connection timed out)
- Feb 18 10:11:05 OpenELECma tvheadend[590]: mpegts: 11778V in 23E - tuning on Montage Technology M88DS3103 : DVB-S #0
- Feb 18 10:11:05 OpenELECma tvheadend[590]: diseqc: failed to send diseqc cmd (e=Connection timed out)
- Feb 18 10:11:05 OpenELECma tvheadend[590]: mpegts: 11555V in 23E - tuning on Montage Technology M88DS3103 : DVB-S #0
- Feb 18 10:11:05 OpenELECma tvheadend[590]: diseqc: failed to send diseqc cmd (e=Connection timed out)
- Feb 18 10:11:05 OpenELECma tvheadend[590]: mpegts: 11635V in 23E - tuning on Montage Technology M88DS3103 : DVB-S #0
- Feb 18 10:11:06 OpenELECma tvheadend[590]: diseqc: failed to send diseqc cmd (e=Connection timed out)
- Feb 18 10:11:06 OpenELECma tvheadend[590]: mpegts: 10842V in 23E - tuning on Montage Technology M88DS3103 : DVB-S #0
- Feb 18 10:11:06 OpenELECma tvheadend[590]: diseqc: failed to send diseqc cmd (e=Connection timed out)
- Feb 18 10:11:06 OpenELECma tvheadend[590]: mpegts: 11475V in 23E - tuning on Montage Technology M88DS3103 : DVB-S #0
- Feb 18 10:11:06 OpenELECma tvheadend[590]: diseqc: failed to send diseqc cmd (e=Connection timed out)
- Feb 18 10:11:06 OpenELECma tvheadend[590]: mpegts: 11675H in 23E - tuning on Montage Technology M88DS3103 : DVB-S #0
- Feb 18 10:11:06 OpenELECma tvheadend[590]: diseqc: failed to send diseqc cmd (e=Connection timed out)
- Feb 18 10:11:06 OpenELECma tvheadend[590]: mpegts: 11797.5H in 23E - tuning on Montage Technology M88DS3103 : DVB-S #0
- Feb 18 10:11:06 OpenELECma tvheadend[590]: diseqc: failed to send diseqc cmd (e=Connection timed out)
- Feb 18 10:11:06 OpenELECma tvheadend[590]: mpegts: 11914H in 23E - tuning on Montage Technology M88DS3103 : DVB-S #0
- Feb 18 10:11:07 OpenELECma tvheadend[590]: diseqc: failed to send diseqc cmd (e=Connection timed out)
- Feb 18 10:11:07 OpenELECma tvheadend[590]: mpegts: 11719.5H in 23E - tuning on Montage Technology M88DS3103 : DVB-S #0
- Feb 18 10:11:07 OpenELECma tvheadend[590]: diseqc: failed to send diseqc cmd (e=Connection timed out)
- Feb 18 10:11:07 OpenELECma tvheadend[590]: mpegts: 12711H in 23E - tuning on Montage Technology M88DS3103 : DVB-S #0
- Feb 18 10:11:07 OpenELECma tvheadend[590]: diseqc: failed to send diseqc cmd (e=Connection timed out)
- Feb 18 10:11:07 OpenELECma tvheadend[590]: mpegts: 12636V in 23E - tuning on Montage Technology M88DS3103 : DVB-S #0
- Feb 18 10:11:07 OpenELECma tvheadend[590]: diseqc: failed to send diseqc cmd (e=Connection timed out)
- Feb 18 10:11:07 OpenELECma tvheadend[590]: mpegts: 11739V in 23E - tuning on Montage Technology M88DS3103 : DVB-S #0
- Feb 18 10:11:08 OpenELECma tvheadend[590]: diseqc: failed to send diseqc cmd (e=Connection timed out)
- Feb 18 10:11:08 OpenELECma tvheadend[590]: mpegts: 11992H in 23E - tuning on Montage Technology M88DS3103 : DVB-S #0
- Feb 18 10:11:08 OpenELECma tvheadend[590]: diseqc: failed to send diseqc cmd (e=Connection timed out)
- Feb 18 10:11:08 OpenELECma tvheadend[590]: mpegts: 11675V in 23E - tuning on Montage Technology M88DS3103 : DVB-S #0
- Feb 18 10:11:08 OpenELECma tvheadend[590]: diseqc: failed to send diseqc cmd (e=Connection timed out)
- Feb 18 10:11:08 OpenELECma tvheadend[590]: mpegts: 12685H in 23E - tuning on Montage Technology M88DS3103 : DVB-S #0
- Feb 18 10:11:08 OpenELECma tvheadend[590]: diseqc: failed to send diseqc cmd (e=Connection timed out)
- Feb 18 10:11:08 OpenELECma tvheadend[590]: mpegts: 12661H in 23E - tuning on Montage Technology M88DS3103 : DVB-S #0
- Feb 18 10:11:08 OpenELECma tvheadend[590]: diseqc: failed to send diseqc cmd (e=Connection timed out)
- Feb 18 10:11:08 OpenELECma tvheadend[590]: mpegts: 12012V in 23E - tuning on Montage Technology M88DS3103 : DVB-S #0
- Feb 18 10:11:09 OpenELECma tvheadend[590]: diseqc: failed to send diseqc cmd (e=Connection timed out)
- Feb 18 10:11:09 OpenELECma tvheadend[590]: mpegts: 12070H in 23E - tuning on Montage Technology M88DS3103 : DVB-S #0
- Feb 18 10:11:09 OpenELECma tvheadend[590]: diseqc: failed to send diseqc cmd (e=Connection timed out)
- Feb 18 10:11:09 OpenELECma tvheadend[590]: mpegts: 11934V in 23E - tuning on Montage Technology M88DS3103 : DVB-S #0
- Feb 18 10:11:09 OpenELECma tvheadend[590]: diseqc: failed to send diseqc cmd (e=Connection timed out)
- Feb 18 10:11:09 OpenELECma tvheadend[590]: mpegts: 12525V in 23E - tuning on Montage Technology M88DS3103 : DVB-S #0
- Feb 18 10:11:09 OpenELECma tvheadend[590]: diseqc: failed to send diseqc cmd (e=Connection timed out)
- Feb 18 10:11:09 OpenELECma tvheadend[590]: mpegts: 11592V in 23E - tuning on Montage Technology M88DS3103 : DVB-S #0
- Feb 18 10:11:10 OpenELECma tvheadend[590]: diseqc: failed to send diseqc cmd (e=Connection timed out)
- Feb 18 10:11:10 OpenELECma tvheadend[590]: mpegts: 10788V in 23E - tuning on Montage Technology M88DS3103 : DVB-S #0
- Feb 18 10:11:10 OpenELECma tvheadend[590]: diseqc: failed to send diseqc cmd (e=Connection timed out)
- Feb 18 10:11:10 OpenELECma tvheadend[590]: mpegts: 12382.5H in 23E - tuning on Montage Technology M88DS3103 : DVB-S #0
- Feb 18 10:11:10 OpenELECma tvheadend[590]: diseqc: failed to send diseqc cmd (e=Connection timed out)
- Feb 18 10:11:10 OpenELECma tvheadend[590]: mpegts: 12605H in 23E - tuning on Montage Technology M88DS3103 : DVB-S #0
- Feb 18 10:11:10 OpenELECma tvheadend[590]: diseqc: failed to send diseqc cmd (e=Connection timed out)
- Feb 18 10:11:10 OpenELECma tvheadend[590]: mpegts: 11797.5H in 23E - tuning on Montage Technology M88DS3103 : DVB-S #0
- Feb 18 10:11:10 OpenELECma tvheadend[590]: diseqc: failed to send diseqc cmd (e=Connection timed out)
- Feb 18 10:11:10 OpenELECma tvheadend[590]: mpegts: 11875.5H in 23E - tuning on Montage Technology M88DS3103 : DVB-S #0
- Feb 18 10:11:11 OpenELECma tvheadend[590]: diseqc: failed to send diseqc cmd (e=Connection timed out)
- Feb 18 10:11:11 OpenELECma tvheadend[590]: mpegts: 11876H in 23E - tuning on Montage Technology M88DS3103 : DVB-S #0
- Feb 18 10:11:11 OpenELECma tvheadend[590]: diseqc: failed to send diseqc cmd (e=Connection timed out)
- Feb 18 10:11:11 OpenELECma tvheadend[590]: mpegts: 11914.5H in 23E - tuning on Montage Technology M88DS3103 : DVB-S #0
- Feb 18 10:11:11 OpenELECma tvheadend[590]: diseqc: failed to send diseqc cmd (e=Connection timed out)
- Feb 18 10:11:11 OpenELECma tvheadend[590]: mpegts: 12070H in 23E - tuning on Montage Technology M88DS3103 : DVB-S #0
- Feb 18 10:11:11 OpenELECma tvheadend[590]: diseqc: failed to send diseqc cmd (e=Connection timed out)
- Feb 18 10:11:11 OpenELECma tvheadend[590]: mpegts: 12109.5H in 23E - tuning on Montage Technology M88DS3103 : DVB-S #0
- Feb 18 10:11:11 OpenELECma tvheadend[590]: diseqc: failed to send diseqc cmd (e=Connection timed out)
- Feb 18 10:11:11 OpenELECma tvheadend[590]: mpegts: 12343.5H in 23E - tuning on Montage Technology M88DS3103 : DVB-S #0
- Feb 18 10:11:12 OpenELECma tvheadend[590]: diseqc: failed to send diseqc cmd (e=Connection timed out)
- Feb 18 10:11:12 OpenELECma tvheadend[590]: mpegts: 12343.5H in 23E - tuning on Montage Technology M88DS3103 : DVB-S #0
- Feb 18 10:11:12 OpenELECma tvheadend[590]: diseqc: failed to send diseqc cmd (e=Connection timed out)
- Feb 18 10:11:12 OpenELECma tvheadend[590]: mpegts: 12382.5H in 23E - tuning on Montage Technology M88DS3103 : DVB-S #0
- Feb 18 10:11:12 OpenELECma tvheadend[590]: diseqc: failed to send diseqc cmd (e=Connection timed out)
- Feb 18 10:11:12 OpenELECma tvheadend[590]: mpegts: 12525H in 23E - tuning on Montage Technology M88DS3103 : DVB-S #0
- Feb 18 10:11:12 OpenELECma tvheadend[590]: diseqc: failed to send diseqc cmd (e=Connection timed out)
- Feb 18 10:11:12 OpenELECma tvheadend[590]: mpegts: 12525H in 23E - tuning on Montage Technology M88DS3103 : DVB-S #0
- Feb 18 10:11:13 OpenELECma tvheadend[590]: diseqc: failed to send diseqc cmd (e=Connection timed out)
- Feb 18 10:11:13 OpenELECma tvheadend[590]: mpegts: 12565H in 23E - tuning on Montage Technology M88DS3103 : DVB-S #0
- Feb 18 10:11:13 OpenELECma tvheadend[590]: diseqc: failed to send diseqc cmd (e=Connection timed out)
- Feb 18 10:11:13 OpenELECma tvheadend[590]: mpegts: 12631H in 23E - tuning on Montage Technology M88DS3103 : DVB-S #0
- Feb 18 10:11:13 OpenELECma tvheadend[590]: diseqc: failed to send diseqc cmd (e=Connection timed out)
- Feb 18 10:11:13 OpenELECma tvheadend[590]: mpegts: 12641H in 23E - tuning on Montage Technology M88DS3103 : DVB-S #0
- Feb 18 10:11:13 OpenELECma tvheadend[590]: diseqc: failed to send diseqc cmd (e=Connection timed out)
- Feb 18 10:11:13 OpenELECma tvheadend[590]: mpegts: 12644H in 23E - tuning on Montage Technology M88DS3103 : DVB-S #0
- Feb 18 10:11:13 OpenELECma tvheadend[590]: diseqc: failed to send diseqc cmd (e=Connection timed out)
- Feb 18 10:11:13 OpenELECma tvheadend[590]: mpegts: 12649H in 23E - tuning on Montage Technology M88DS3103 : DVB-S #0
- Feb 18 10:11:14 OpenELECma tvheadend[590]: diseqc: failed to send diseqc cmd (e=Connection timed out)
- Feb 18 10:11:14 OpenELECma tvheadend[590]: mpegts: 12696H in 23E - tuning on Montage Technology M88DS3103 : DVB-S #0
- Feb 18 10:11:14 OpenELECma tvheadend[590]: diseqc: failed to send diseqc cmd (e=Connection timed out)
- Feb 18 10:11:14 OpenELECma tvheadend[590]: mpegts: 12725.5H in 23E - tuning on Montage Technology M88DS3103 : DVB-S #0
- Feb 18 10:11:14 OpenELECma tvheadend[590]: diseqc: failed to send diseqc cmd (e=Connection timed out)
- Feb 18 10:11:14 OpenELECma tvheadend[590]: mpegts: 10758V in 23E - tuning on Montage Technology M88DS3103 : DVB-S #0
- Feb 18 10:11:14 OpenELECma tvheadend[590]: diseqc: failed to send diseqc cmd (e=Connection timed out)
- Feb 18 10:11:14 OpenELECma tvheadend[590]: mpegts: 11515V in 23E - tuning on Montage Technology M88DS3103 : DVB-S #0
- Feb 18 10:11:15 OpenELECma tvheadend[590]: diseqc: failed to send diseqc cmd (e=Connection timed out)
- Feb 18 10:11:15 OpenELECma tvheadend[590]: mpegts: 11739V in 23E - tuning on Montage Technology M88DS3103 : DVB-S #0
- Feb 18 10:11:15 OpenELECma tvheadend[590]: diseqc: failed to send diseqc cmd (e=Connection timed out)
- Feb 18 10:11:15 OpenELECma tvheadend[590]: mpegts: 11778V in 23E - tuning on Montage Technology M88DS3103 : DVB-S #0
- Feb 18 10:11:15 OpenELECma tvheadend[590]: diseqc: failed to send diseqc cmd (e=Connection timed out)
- Feb 18 10:11:15 OpenELECma tvheadend[590]: mpegts: 11817V in 23E - tuning on Montage Technology M88DS3103 : DVB-S #0
- Feb 18 10:11:15 OpenELECma tvheadend[590]: diseqc: failed to send diseqc cmd (e=Connection timed out)
- Feb 18 10:11:15 OpenELECma tvheadend[590]: mpegts: 11856V in 23E - tuning on Montage Technology M88DS3103 : DVB-S #0
- Feb 18 10:11:15 OpenELECma tvheadend[590]: diseqc: failed to send diseqc cmd (e=Connection timed out)
- Feb 18 10:11:15 OpenELECma tvheadend[590]: mpegts: 11856V in 23E - tuning on Montage Technology M88DS3103 : DVB-S #0
- Feb 18 10:11:16 OpenELECma tvheadend[590]: diseqc: failed to send diseqc cmd (e=Connection timed out)
- Feb 18 10:11:16 OpenELECma tvheadend[590]: mpegts: 11934V in 23E - tuning on Montage Technology M88DS3103 : DVB-S #0
- Feb 18 10:11:16 OpenELECma tvheadend[590]: diseqc: failed to send diseqc cmd (e=Connection timed out)
- Feb 18 10:11:16 OpenELECma tvheadend[590]: mpegts: 11973V in 23E - tuning on Montage Technology M88DS3103 : DVB-S #0
- Feb 18 10:11:16 OpenELECma tvheadend[590]: diseqc: failed to send diseqc cmd (e=Connection timed out)
- Feb 18 10:11:16 OpenELECma tvheadend[590]: mpegts: 12090V in 23E - tuning on Montage Technology M88DS3103 : DVB-S #0
- Feb 18 10:11:16 OpenELECma tvheadend[590]: diseqc: failed to send diseqc cmd (e=Connection timed out)
- Feb 18 10:11:16 OpenELECma tvheadend[590]: mpegts: 12129V in 23E - tuning on Montage Technology M88DS3103 : DVB-S #0
- Feb 18 10:11:17 OpenELECma tvheadend[590]: diseqc: failed to send diseqc cmd (e=Connection timed out)
- Feb 18 10:11:17 OpenELECma tvheadend[590]: mpegts: 12168V in 23E - tuning on Montage Technology M88DS3103 : DVB-S #0
- Feb 18 10:11:17 OpenELECma tvheadend[590]: diseqc: failed to send diseqc cmd (e=Connection timed out)
- Feb 18 10:11:17 OpenELECma tvheadend[590]: mpegts: 12363V in 23E - tuning on Montage Technology M88DS3103 : DVB-S #0
- Feb 18 10:11:17 OpenELECma tvheadend[590]: diseqc: failed to send diseqc cmd (e=Connection timed out)
- Feb 18 10:11:17 OpenELECma tvheadend[590]: mpegts: 12565V in 23E - tuning on Montage Technology M88DS3103 : DVB-S #0
- Feb 18 10:11:17 OpenELECma tvheadend[590]: diseqc: failed to send diseqc cmd (e=Connection timed out)
- Feb 18 10:11:17 OpenELECma tvheadend[590]: mpegts: 12605V in 23E - tuning on Montage Technology M88DS3103 : DVB-S #0
- Feb 18 10:11:17 OpenELECma tvheadend[590]: diseqc: failed to send diseqc cmd (e=Connection timed out)
- Feb 18 10:11:17 OpenELECma tvheadend[590]: mpegts: 12630V in 23E - tuning on Montage Technology M88DS3103 : DVB-S #0
- Feb 18 10:11:18 OpenELECma tvheadend[590]: diseqc: failed to send diseqc cmd (e=Connection timed out)
- Feb 18 10:11:18 OpenELECma tvheadend[590]: mpegts: 12685V in 23E - tuning on Montage Technology M88DS3103 : DVB-S #0
- Feb 18 10:11:18 OpenELECma tvheadend[590]: diseqc: failed to send diseqc cmd (e=Connection timed out)
- Feb 18 10:11:18 OpenELECma tvheadend[590]: mpegts: 12725V in 23E - tuning on Montage Technology M88DS3103 : DVB-S #0
- Feb 18 10:11:18 OpenELECma tvheadend[590]: diseqc: failed to send diseqc cmd (e=Connection timed out)
- Feb 18 10:11:35 OpenELECma tvheadend[590]: http: 127.0.0.1: HTTP/1.1 HEAD /imagecache/5 -- 404
- Feb 18 10:11:35 OpenELECma tvheadend[590]: http: 127.0.0.1: HTTP/1.1 HEAD /imagecache/12 -- 404
- Feb 18 10:11:35 OpenELECma tvheadend[590]: http: 127.0.0.1: HTTP/1.1 HEAD /imagecache/4 -- 404
- Feb 18 10:11:35 OpenELECma tvheadend[590]: http: 127.0.0.1: HTTP/1.1 HEAD /imagecache/7 -- 404
- Feb 18 10:11:35 OpenELECma tvheadend[590]: http: 127.0.0.1: HTTP/1.1 HEAD /imagecache/20 -- 404
- Feb 18 10:11:35 OpenELECma tvheadend[590]: http: 127.0.0.1: HTTP/1.1 HEAD /imagecache/30 -- 404
- Feb 18 10:11:35 OpenELECma tvheadend[590]: http: 127.0.0.1: HTTP/1.1 HEAD /imagecache/10 -- 404
- Feb 18 10:11:35 OpenELECma tvheadend[590]: http: 127.0.0.1: HTTP/1.1 HEAD /imagecache/18 -- 404
- Feb 18 10:11:35 OpenELECma tvheadend[590]: http: 127.0.0.1: HTTP/1.1 HEAD /imagecache/1 -- 404
- Feb 18 10:11:35 OpenELECma tvheadend[590]: http: 127.0.0.1: HTTP/1.1 HEAD /imagecache/23 -- 404
- Feb 18 10:11:35 OpenELECma tvheadend[590]: http: 127.0.0.1: HTTP/1.1 HEAD /imagecache/16 -- 404
- Feb 18 10:11:35 OpenELECma tvheadend[590]: http: 127.0.0.1: HTTP/1.1 HEAD /imagecache/29 -- 404
- Feb 18 10:11:35 OpenELECma tvheadend[590]: http: 127.0.0.1: HTTP/1.1 HEAD /imagecache/2 -- 404
- Feb 18 10:11:35 OpenELECma tvheadend[590]: http: 127.0.0.1: HTTP/1.1 HEAD /imagecache/14 -- 404
- Feb 18 10:11:35 OpenELECma tvheadend[590]: http: 127.0.0.1: HTTP/1.1 HEAD /imagecache/13 -- 404
- Feb 18 10:12:08 OpenELECma sshd[906]: Accepted password for root from 192.168.1.101 port 51379 ssh2
- Feb 18 10:12:22 OpenELECma tvheadend[590]: mpegts: 12525V in 23E - tuning on Montage Technology M88DS3103 : DVB-S #0
- Feb 18 10:12:22 OpenELECma tvheadend[590]: diseqc: failed to send diseqc cmd (e=Connection timed out)
- Feb 18 10:12:22 OpenELECma tvheadend[590]: mpegts: 11592V in 23E - tuning on Montage Technology M88DS3103 : DVB-S #0
- Feb 18 10:12:23 OpenELECma tvheadend[590]: diseqc: failed to send diseqc cmd (e=Connection timed out)
- Feb 18 10:12:23 OpenELECma tvheadend[590]: mpegts: 10788V in 23E - tuning on Montage Technology M88DS3103 : DVB-S #0
- Feb 18 10:12:23 OpenELECma tvheadend[590]: diseqc: failed to send diseqc cmd (e=Connection timed out)
- Feb 18 10:12:23 OpenELECma tvheadend[590]: mpegts: 12382.5H in 23E - tuning on Montage Technology M88DS3103 : DVB-S #0
- Feb 18 10:12:24 OpenELECma tvheadend[590]: diseqc: failed to send diseqc cmd (e=Connection timed out)
- Feb 18 10:12:24 OpenELECma tvheadend[590]: mpegts: 12605H in 23E - tuning on Montage Technology M88DS3103 : DVB-S #0
- Feb 18 10:12:24 OpenELECma tvheadend[590]: diseqc: failed to send diseqc cmd (e=Connection timed out)
- Feb 18 10:12:24 OpenELECma tvheadend[590]: mpegts: 11797.5H in 23E - tuning on Montage Technology M88DS3103 : DVB-S #0
- Feb 18 10:12:24 OpenELECma tvheadend[590]: diseqc: failed to send diseqc cmd (e=Connection timed out)
- Feb 18 10:12:24 OpenELECma tvheadend[590]: mpegts: 11875.5H in 23E - tuning on Montage Technology M88DS3103 : DVB-S #0
- Feb 18 10:12:24 OpenELECma tvheadend[590]: diseqc: failed to send diseqc cmd (e=Connection timed out)
- Feb 18 10:12:24 OpenELECma tvheadend[590]: mpegts: 11876H in 23E - tuning on Montage Technology M88DS3103 : DVB-S #0
- Feb 18 10:12:24 OpenELECma tvheadend[590]: diseqc: failed to send diseqc cmd (e=Connection timed out)
- Feb 18 10:12:24 OpenELECma tvheadend[590]: mpegts: 11914.5H in 23E - tuning on Montage Technology M88DS3103 : DVB-S #0
- Feb 18 10:12:25 OpenELECma tvheadend[590]: diseqc: failed to send diseqc cmd (e=Connection timed out)
- Feb 18 10:12:25 OpenELECma tvheadend[590]: mpegts: 12070H in 23E - tuning on Montage Technology M88DS3103 : DVB-S #0
- Feb 18 10:12:25 OpenELECma tvheadend[590]: diseqc: failed to send diseqc cmd (e=Connection timed out)
- Feb 18 10:12:25 OpenELECma tvheadend[590]: mpegts: 12109.5H in 23E - tuning on Montage Technology M88DS3103 : DVB-S #0
- Feb 18 10:12:25 OpenELECma tvheadend[590]: diseqc: failed to send diseqc cmd (e=Connection timed out)
- Feb 18 10:12:25 OpenELECma tvheadend[590]: mpegts: 12343.5H in 23E - tuning on Montage Technology M88DS3103 : DVB-S #0
- Feb 18 10:12:25 OpenELECma tvheadend[590]: diseqc: failed to send diseqc cmd (e=Connection timed out)
- Feb 18 10:12:25 OpenELECma tvheadend[590]: mpegts: 12343.5H in 23E - tuning on Montage Technology M88DS3103 : DVB-S #0
- Feb 18 10:12:26 OpenELECma tvheadend[590]: diseqc: failed to send diseqc cmd (e=Connection timed out)
- Feb 18 10:12:26 OpenELECma tvheadend[590]: mpegts: 12382.5H in 23E - tuning on Montage Technology M88DS3103 : DVB-S #0
- Feb 18 10:12:26 OpenELECma tvheadend[590]: diseqc: failed to send diseqc cmd (e=Connection timed out)
- Feb 18 10:12:26 OpenELECma tvheadend[590]: mpegts: 12525H in 23E - tuning on Montage Technology M88DS3103 : DVB-S #0
- Feb 18 10:12:26 OpenELECma tvheadend[590]: diseqc: failed to send diseqc cmd (e=Connection timed out)
- Feb 18 10:12:26 OpenELECma tvheadend[590]: mpegts: 12525H in 23E - tuning on Montage Technology M88DS3103 : DVB-S #0
- Feb 18 10:12:26 OpenELECma tvheadend[590]: diseqc: failed to send diseqc cmd (e=Connection timed out)
- Feb 18 10:12:26 OpenELECma tvheadend[590]: mpegts: 12565H in 23E - tuning on Montage Technology M88DS3103 : DVB-S #0
- Feb 18 10:12:27 OpenELECma tvheadend[590]: diseqc: failed to send diseqc cmd (e=Connection timed out)
- Feb 18 10:12:27 OpenELECma tvheadend[590]: mpegts: 12631H in 23E - tuning on Montage Technology M88DS3103 : DVB-S #0
- Feb 18 10:12:27 OpenELECma tvheadend[590]: diseqc: failed to send diseqc cmd (e=Connection timed out)
- Feb 18 10:12:27 OpenELECma tvheadend[590]: mpegts: 12641H in 23E - tuning on Montage Technology M88DS3103 : DVB-S #0
- Feb 18 10:12:27 OpenELECma tvheadend[590]: diseqc: failed to send diseqc cmd (e=Connection timed out)
- Feb 18 10:12:27 OpenELECma tvheadend[590]: mpegts: 12644H in 23E - tuning on Montage Technology M88DS3103 : DVB-S #0
- Feb 18 10:12:27 OpenELECma tvheadend[590]: diseqc: failed to send diseqc cmd (e=Connection timed out)
- Feb 18 10:12:27 OpenELECma tvheadend[590]: mpegts: 12649H in 23E - tuning on Montage Technology M88DS3103 : DVB-S #0
- Feb 18 10:12:27 OpenELECma tvheadend[590]: diseqc: failed to send diseqc cmd (e=Connection timed out)
- Feb 18 10:12:27 OpenELECma tvheadend[590]: mpegts: 12696H in 23E - tuning on Montage Technology M88DS3103 : DVB-S #0
- Feb 18 10:12:28 OpenELECma tvheadend[590]: diseqc: failed to send diseqc cmd (e=Connection timed out)
- Feb 18 10:12:28 OpenELECma tvheadend[590]: mpegts: 12725.5H in 23E - tuning on Montage Technology M88DS3103 : DVB-S #0
- Feb 18 10:12:28 OpenELECma tvheadend[590]: diseqc: failed to send diseqc cmd (e=Connection timed out)
- Feb 18 10:12:28 OpenELECma tvheadend[590]: mpegts: 10758V in 23E - tuning on Montage Technology M88DS3103 : DVB-S #0
- Feb 18 10:12:28 OpenELECma tvheadend[590]: diseqc: failed to send diseqc cmd (e=Connection timed out)
- Feb 18 10:12:28 OpenELECma tvheadend[590]: mpegts: 11515V in 23E - tuning on Montage Technology M88DS3103 : DVB-S #0
- Feb 18 10:12:28 OpenELECma tvheadend[590]: diseqc: failed to send diseqc cmd (e=Connection timed out)
- Feb 18 10:12:28 OpenELECma tvheadend[590]: mpegts: 11739V in 23E - tuning on Montage Technology M88DS3103 : DVB-S #0
- Feb 18 10:12:28 OpenELECma tvheadend[590]: diseqc: failed to send diseqc cmd (e=Connection timed out)
- Feb 18 10:12:28 OpenELECma tvheadend[590]: mpegts: 11778V in 23E - tuning on Montage Technology M88DS3103 : DVB-S #0
- Feb 18 10:12:29 OpenELECma tvheadend[590]: diseqc: failed to send diseqc cmd (e=Connection timed out)
- Feb 18 10:12:29 OpenELECma tvheadend[590]: mpegts: 11817V in 23E - tuning on Montage Technology M88DS3103 : DVB-S #0
- Feb 18 10:12:29 OpenELECma tvheadend[590]: diseqc: failed to send diseqc cmd (e=Connection timed out)
- Feb 18 10:12:29 OpenELECma tvheadend[590]: mpegts: 11856V in 23E - tuning on Montage Technology M88DS3103 : DVB-S #0
- Feb 18 10:12:29 OpenELECma tvheadend[590]: diseqc: failed to send diseqc cmd (e=Connection timed out)
- Feb 18 10:12:29 OpenELECma tvheadend[590]: mpegts: 11856V in 23E - tuning on Montage Technology M88DS3103 : DVB-S #0
- Feb 18 10:12:29 OpenELECma tvheadend[590]: diseqc: failed to send diseqc cmd (e=Connection timed out)
- Feb 18 10:12:29 OpenELECma tvheadend[590]: mpegts: 11934V in 23E - tuning on Montage Technology M88DS3103 : DVB-S #0
- Feb 18 10:12:29 OpenELECma tvheadend[590]: diseqc: failed to send diseqc cmd (e=Connection timed out)
- Feb 18 10:12:29 OpenELECma tvheadend[590]: mpegts: 11973V in 23E - tuning on Montage Technology M88DS3103 : DVB-S #0
- Feb 18 10:12:30 OpenELECma tvheadend[590]: diseqc: failed to send diseqc cmd (e=Connection timed out)
- Feb 18 10:12:30 OpenELECma tvheadend[590]: mpegts: 12090V in 23E - tuning on Montage Technology M88DS3103 : DVB-S #0
- Feb 18 10:12:30 OpenELECma tvheadend[590]: diseqc: failed to send diseqc cmd (e=Connection timed out)
- Feb 18 10:12:30 OpenELECma tvheadend[590]: mpegts: 12129V in 23E - tuning on Montage Technology M88DS3103 : DVB-S #0
- Feb 18 10:12:30 OpenELECma tvheadend[590]: diseqc: failed to send diseqc cmd (e=Connection timed out)
- Feb 18 10:12:30 OpenELECma tvheadend[590]: mpegts: 12168V in 23E - tuning on Montage Technology M88DS3103 : DVB-S #0
- Feb 18 10:12:30 OpenELECma tvheadend[590]: diseqc: failed to send diseqc cmd (e=Connection timed out)
- Feb 18 10:12:30 OpenELECma tvheadend[590]: mpegts: 12363V in 23E - tuning on Montage Technology M88DS3103 : DVB-S #0
- Feb 18 10:12:31 OpenELECma tvheadend[590]: diseqc: failed to send diseqc cmd (e=Connection timed out)
- Feb 18 10:12:31 OpenELECma tvheadend[590]: mpegts: 12565V in 23E - tuning on Montage Technology M88DS3103 : DVB-S #0
- Feb 18 10:12:31 OpenELECma tvheadend[590]: diseqc: failed to send diseqc cmd (e=Connection timed out)
- Feb 18 10:12:31 OpenELECma tvheadend[590]: mpegts: 12605V in 23E - tuning on Montage Technology M88DS3103 : DVB-S #0
- Feb 18 10:12:31 OpenELECma tvheadend[590]: diseqc: failed to send diseqc cmd (e=Connection timed out)
- Feb 18 10:12:31 OpenELECma tvheadend[590]: mpegts: 12630V in 23E - tuning on Montage Technology M88DS3103 : DVB-S #0
- Feb 18 10:12:31 OpenELECma tvheadend[590]: diseqc: failed to send diseqc cmd (e=Connection timed out)
- Feb 18 10:12:31 OpenELECma tvheadend[590]: mpegts: 12685V in 23E - tuning on Montage Technology M88DS3103 : DVB-S #0
- Feb 18 10:12:31 OpenELECma tvheadend[590]: diseqc: failed to send diseqc cmd (e=Connection timed out)
- Feb 18 10:12:31 OpenELECma tvheadend[590]: mpegts: 12725V in 23E - tuning on Montage Technology M88DS3103 : DVB-S #0
- Feb 18 10:12:32 OpenELECma tvheadend[590]: diseqc: failed to send diseqc cmd (e=Connection timed out)
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement