Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- [01-01 00:00:00.000000] Linux version 2.6.29 (tanbaihua@localhost.localdomain) (gcc version 4.4.0 (GCC) ) #1 PREEMPT Sat Jul 24 21:43:15 CST 2010
- [01-01 00:00:00.000000] CPU: ARMv6-compatible processor [4117b365] revision 5 (ARMv6TEJ), cr=00c5387f
- [01-01 00:00:00.000000] CPU: VIPT aliasing data cache, VIPT aliasing instruction cache
- [01-01 00:00:00.000000] Machine: blade ZTE handset
- [01-01 00:00:00.000000] [ZYF@FTM]parse_tag_zteftm: zte FTM enable !
- [01-01 00:00:00.000000] Partition (from atag) recovery -- Offset:156 Size:24
- [01-01 00:00:00.000000] Partition (from atag) boot -- Offset:17a Size:24
- [01-01 00:00:00.000000] Partition (from atag) splash -- Offset:19e Size:c
- [01-01 00:00:00.000000] Partition (from atag) misc -- Offset:1aa Size:3
- [01-01 00:00:00.000000] Partition (from atag) cache -- Offset:1ad Size:14a
- [01-01 00:00:00.000000] Partition (from atag) system -- Offset:2f7 Size:67c
- [01-01 00:00:00.000000] Partition (from atag) userdata -- Offset:973 Size:681
- [01-01 00:00:00.000000] Partition (from atag) persist -- Offset:ff4 Size:c
- [01-01 00:00:00.000000] Ignoring unrecognised tag 0x5d53cd73
- [01-01 00:00:00.000000] Memory policy: ECC disabled, Data cache writeback
- [01-01 00:00:00.000000] allocating 29954048 bytes at 816cc000 (40cc000 physical) for mdp pmem arena
- [01-01 00:00:00.000000] allocating 11419648 bytes at 8335d000 (5d5d000 physical) for adsp pmem arena
- [01-01 00:00:00.000000] allocating 2097152 bytes at 83e41000 (6841000 physical) for fb
- [01-01 00:00:00.000000] allocating 2097152 bytes at 84100000 (6b00000 physical) for kernel ebi1 pmem arena
- [01-01 00:00:00.000000] allocating 2097152 bytes at 84300000 (6d00000 physical) for KGSL
- [01-01 00:00:00.000000] L210 cache controller enabled
- [01-01 00:00:00.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 118868
- [01-01 00:00:00.000000] Kernel command line: rdinit=/init console=ttyDCC0 console=ttyMSM2,115200
- [01-01 00:00:00.000000] PID hash table entries: 2048 (order: 11, 8192 bytes)
- [01-01 00:00:00.010000] Console: colour dummy device 80x30
- [01-01 00:00:00.010000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
- [01-01 00:00:00.010000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
- [01-01 00:00:00.050000] Memory: 214MB 256MB = 470MB total
- [01-01 00:00:00.050000] Memory: 423296KB available (4604K code, 1014K data, 136K init)
- [01-01 00:00:00.050000] Calibrating delay loop... 599.65 BogoMIPS (lpj=2998272)
- [01-01 00:00:00.270000] Mount-cache hash table entries: 512
- [01-01 00:00:00.270000] CPU: Testing write buffer coherency: ok
- [01-01 00:00:00.270000] net_namespace: 880 bytes
- [01-01 00:00:00.270000] NET: Registered protocol family 16
- [01-01 00:00:00.270000] smem_find(137, 64): wrong size 56
- [01-01 00:00:00.270000] socinfo_init: v2, id=67, ver=1.2, raw_id=961, raw_ver=2
- [01-01 00:00:00.270000] acpu_clock_init()
- [01-01 00:00:00.270000] L val: PLL0: 50, PLL1: 12, PLL2: 62
- [01-01 00:00:00.270000] ACPU running at 600000 KHz
- [01-01 00:00:00.270000] Id CPU-KHz PLL DIV AHB-KHz ADIV AXI-KHz D0 D1 D2 U0 U1 U2
- [01-01 00:00:00.270000] 0 19200 -1 1 19200 1 30720 -1 -1 -1 1 4 3
- [01-01 00:00:00.270000] 1 120000 0 8 60000 2 61440 -1 -1 -1 5 4 3
- [01-01 00:00:00.270000] 2 122880 1 2 61440 2 61440 1 -1 -1 5 4 3
- [01-01 00:00:00.270000] 3 200000 2 6 66667 3 61440 1 2 -1 5 4 6
- [01-01 00:00:00.270000] 4 245760 1 1 122880 2 61440 1 2 3 7 -1 6
- [01-01 00:00:00.270000] 5 320000 0 3 160000 2 160000 1 2 3 7 -1 6
- [01-01 00:00:00.270000] 6 400000 2 3 133333 3 160000 5 4 3 7 -1 8
- [01-01 00:00:00.270000] 7 480000 0 2 160000 3 160000 5 4 6 -1 -1 8
- [01-01 00:00:00.270000] 8 600000 2 2 200000 3 200000 7 -1 6 -1 -1 -1
- [01-01 00:00:00.270000] Shared PLL control available.
- [01-01 00:00:00.270000] 5 scaling frequencies supported.
- [01-01 00:00:00.270000] gpio_request: 21 ok!
- [01-01 00:00:00.270000]
- [01-01 00:00:00.270000] stone_20100302 vib00:**************************************
- [01-01 00:00:00.280000] rmt_storage_add_ramfs: No RAMFS table in SMEM
- [01-01 00:00:00.300000] bio: create slab <bio-0> at 0
- [01-01 00:00:00.300000] msm_i2c_probe
- [01-01 00:00:00.300000] Warning: msm on-chip aux i2c bus disabled on Board mooncake!
- [01-01 00:00:00.300000] msm_i2c_probe: clk_ctl 35d, 100000 Hz
- [01-01 00:00:00.300000] Bluetooth: Core ver 2.15
- [01-01 00:00:00.300000] NET: Registered protocol family 31
- [01-01 00:00:00.300000] Bluetooth: HCI device and connection manager initialized
- [01-01 00:00:00.300000] Bluetooth: HCI socket layer initialized
- [01-01 00:00:00.300000] NET: Registered protocol family 2
- [01-01 00:00:00.300000] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
- [01-01 00:00:00.300000] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
- [01-01 00:00:00.300000] TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
- [01-01 00:00:00.310000] TCP: Hash tables configured (established 16384 bind 16384)
- [01-01 00:00:00.310000] TCP reno registered
- [01-01 00:00:00.310000] NET: Registered protocol family 1
- [01-01 00:00:00.310000] checking if image is initramfs... it is
- [01-01 00:00:00.620028] Freeing initrd memory: 812K
- [01-01 00:00:00.620028] smd probe
- [01-01 00:00:00.620028] smd_core_init()
- [01-01 00:00:00.620028] smd_core_init() done
- [01-01 00:00:00.620028] smd_alloc_loopback_channel: 'local_loopback' cid=100
- [01-01 00:00:00.620028] smd_alloc_channel() 'DS' cid=0
- [01-01 00:00:00.620028] smd_alloc_channel() 'DIAG' cid=1
- [01-01 00:00:00.630007] smd_alloc_channel() 'RPCCALL' cid=2
- [01-01 00:00:00.630007] smd_alloc_channel() 'DATA1' cid=7
- [01-01 00:00:00.630007] smd_alloc_channel() 'DATA2' cid=8
- [01-01 00:00:00.630007] smd_alloc_channel() 'DATA3' cid=9
- [01-01 00:00:00.630007] smd_alloc_channel() 'DATA4' cid=10
- [01-01 00:00:00.630007] smd_alloc_channel() 'DATA5' cid=11
- [01-01 00:00:00.630007] smd_alloc_channel() 'DATA6' cid=12
- [01-01 00:00:00.630007] smd_alloc_channel() 'DATA7' cid=13
- [01-01 00:00:00.630007] smd_alloc_channel() 'DATA11' cid=17
- [01-01 00:00:00.630007] smd_alloc_channel() 'DAL00' cid=38
- [01-01 00:00:00.630007] smd_alloc_channel() 'DATA5_CNTL' cid=39
- [01-01 00:00:00.630007] smd_alloc_channel() 'DATA6_CNTL' cid=40
- [01-01 00:00:00.630007] smd_alloc_channel() 'DATA7_CNTL' cid=41
- [01-01 00:00:00.630007] SMD Control Port Driver Initialized.
- [01-01 00:00:00.630007] SMD: ch 2 0 -> 1
- [01-01 00:00:00.630007] SMD: ch 2 1 -> 2
- [01-01 00:00:00.630007] Using very old AMSS modem firmware.
- [01-01 00:00:00.630007] [adsp:adsp.c:adsp_init] rs3000000a -- 0
- [01-01 00:00:00.640017] [msm-audio:audpp.c:audpp_probe] Number of decoder supported 5
- [01-01 00:00:00.640017] [msm-audio:audpp.c:audpp_probe] Number of concurrency supported 7
- [01-01 00:00:00.640017] [msm-audio:audpp.c:audpp_probe] module_name:AUDPLAY0TASK
- [01-01 00:00:00.640017] [msm-audio:audpp.c:audpp_probe] queueid:13
- [01-01 00:00:00.640017] [msm-audio:audpp.c:audpp_probe] decid:0
- [01-01 00:00:00.640017] [msm-audio:audpp.c:audpp_probe] nr_codec_support:11
- [01-01 00:00:00.640017] [msm-audio:audpp.c:audpp_probe] module_name:AUDPLAY1TASK
- [01-01 00:00:00.640017] [msm-audio:audpp.c:audpp_probe] queueid:14
- [01-01 00:00:00.640017] [msm-audio:audpp.c:audpp_probe] decid:1
- [01-01 00:00:00.640017] [msm-audio:audpp.c:audpp_probe] nr_codec_support:5
- [01-01 00:00:00.640017] [msm-audio:audpp.c:audpp_probe] module_name:AUDPLAY2TASK
- [01-01 00:00:00.640017] [msm-audio:audpp.c:audpp_probe] queueid:15
- [01-01 00:00:00.640017] [msm-audio:audpp.c:audpp_probe] decid:2
- [01-01 00:00:00.640017] [msm-audio:audpp.c:audpp_probe] nr_codec_support:5
- [01-01 00:00:00.640017] [msm-audio:audpp.c:audpp_probe] module_name:AUDPLAY3TASK
- [01-01 00:00:00.640017] [msm-audio:audpp.c:audpp_probe] queueid:16
- [01-01 00:00:00.640017] [msm-audio:audpp.c:audpp_probe] decid:3
- [01-01 00:00:00.640017] [msm-audio:audpp.c:audpp_probe] nr_codec_support:4
- [01-01 00:00:00.640017] [msm-audio:audpp.c:audpp_probe] module_name:AUDPLAY4TASK
- [01-01 00:00:00.640017] [msm-audio:audpp.c:audpp_probe] queueid:17
- [01-01 00:00:00.640017] [msm-audio:audpp.c:audpp_probe] decid:4
- [01-01 00:00:00.640017] [msm-audio:audpp.c:audpp_probe] nr_codec_support:1
- [01-01 00:00:00.650026] pm_monitor_init enter
- [01-01 00:00:00.675875] RPC_TIME_TOD_SET_APPS_BASES:
- [01-01 00:00:00.675875] tick = 83790
- [01-01 00:00:00.675875] stamp = 16777216
- [01-01 00:00:00.675875] /home/tanbaihua/P729B/P729B_USR/android_b09/kernel/drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
- [01-01 00:00:00.675875] ashmem: initialized
- [01-01 00:00:00.680025] yaffs Jul 24 2010 21:42:20 Installing.
- [01-01 00:00:00.680025] msgmni has been set to 829
- [01-01 00:00:00.680025] io scheduler noop registered
- [01-01 00:00:00.680025] io scheduler deadline registered (default)
- [01-01 00:00:00.680025] msm_fb_probe: phy_Addr = 0x6841000 virt = 0xadc00000
- [01-01 00:00:00.680025] MDP HW Base phy_Address = 0xaa200000 virt = 0xad900000
- [01-01 00:00:00.680025] [ZGC]:init_lcd_proc
- [01-01 00:00:00.690004] lcdc config
- [01-01 00:00:00.690004] spi_init
- [01-01 00:00:00.690004] !<6>[ZYF] lcdc_set_bl level=3, 1
- [01-01 00:00:00.730013] Console: switching to colour frame buffer device 60x50
- [01-01 00:00:00.750002] FrameBuffer[0] 480x800 size=1536000 bytes is registered successfully!
- [01-01 00:00:00.750002] load_565rle_image: Can not open /logo.bmp
- [01-01 00:00:00.750002] [ZGC]:LcdPanleID = 40
- [01-01 00:00:00.750002] Registered led device: lcd-backlight
- [01-01 00:00:00.770022] diagfwd initializing ..
- [01-01 00:00:00.770022] SMD: ch 1 0 -> 1
- [01-01 00:00:00.770022] diag opened SMD port ; r = 0
- [01-01 00:00:00.770022] SMD: ch 1 1 -> 2
- [01-01 00:00:00.770022] diagchar initializing ..
- [01-01 00:00:00.770022] diagchar initialized
- [01-01 00:00:00.770022] [drm] Initialized drm 1.1.0 20060810
- [01-01 00:00:00.770022] msm_serial_hs.0: ttyHS0 at MMIO 0xa0200000 (irq = 45) is a MSM HS UART
- [01-01 00:00:00.770022] msm_serial_hs module loaded
- [01-01 00:00:00.770022] brd: module loaded
- [01-01 00:00:00.780001] loop: module loaded
- [01-01 00:00:00.780001] pmem: Initializing pmem_kernel_ebi1 (in-kernel)
- [01-01 00:00:00.780001] pmem: Initializing pmem (user-space) as cached
- [01-01 00:00:00.780001] pmem: Initializing pmem_adsp (user-space) as non-cached
- [01-01 00:00:00.780001] [FM][FYA@FM_SI4708]fm_si4708 add driver successful
- [01-01 00:00:00.780001] SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation enabled).
- [01-01 00:00:00.780001] CSLIP: code copyright 1989 Regents of the University of California.
- [01-01 00:00:00.780001] smc91x: not found (-19).
- [01-01 00:00:00.780001] rmnet0 (): not using net_device_ops yet
- [01-01 00:00:00.780001] rmnet1 (): not using net_device_ops yet
- [01-01 00:00:00.780001] rmnet2 (): not using net_device_ops yet
- [01-01 00:00:00.780001] Linux video capture interface: v2.00
- [01-01 00:00:00.780001] msm_nand: phys addr 0xa0a00000
- [01-01 00:00:00.780001] msm_nandc01_phys resource invalid/absent
- [01-01 00:00:00.780001] dmac 0x7
- [01-01 00:00:00.780001] allocated dma buffer at ffc0f000, dma_addr 2f11a000
- [01-01 00:00:00.790011] ONFI probe : CRC Check failed on ONFI Parameter data
- [01-01 00:00:00.790011] status: e00020
- [01-01 00:00:00.790011] nandid: 5510bcad maker ad device bc
- [01-01 00:00:00.790011] Found a supported NAND device
- [01-01 00:00:00.790011] NAND Id : 0x5510bcad
- [01-01 00:00:00.790011] Buswidth : 16 Bits
- [01-01 00:00:00.790011] Density : 512 MByte
- [01-01 00:00:00.790011] Pagesize : 2048 Bytes
- [01-01 00:00:00.790011] Erasesize: 131072 Bytes
- [01-01 00:00:00.790011] Oobsize : 64 Bytes
- [01-01 00:00:00.790011] CFG0 Init : 0xa85408c0
- [01-01 00:00:00.790011] CFG1 Init : 0x0004745e
- [01-01 00:00:00.790011] ECCBUFCFG : 0x00000203
- [01-01 00:00:00.790011] Creating 8 MTD partitions on "msm_nand":
- [01-01 00:00:00.790011] 0x000002ac0000-0x000002f40000 : "recovery"
- [01-01 00:00:00.790011] 0x000002f40000-0x0000033c0000 : "boot"
- [01-01 00:00:00.790011] 0x0000033c0000-0x000003540000 : "splash"
- [01-01 00:00:00.790011] 0x000003540000-0x0000035a0000 : "misc"
- [01-01 00:00:00.790011] 0x0000035a0000-0x000005ee0000 : "cache"
- [01-01 00:00:00.790011] 0x000005ee0000-0x000012e60000 : "system"
- [01-01 00:00:00.790011] 0x000012e60000-0x00001fe80000 : "userdata"
- [01-01 00:00:00.790011] 0x00001fe80000-0x000020000000 : "persist"
- [01-01 00:00:00.790011] msm_hsusb_rpc_connect: rpc connect success vers = 10001
- [01-01 00:00:00.800020] usb_probe: io=ad820000, irq=47, dma=ffc11000(2f06f000)
- [01-01 00:00:00.800020] usb_function_register: name = 'adb', map = 4
- [01-01 00:00:00.800020] usb_function_register: name = 'mass_storage', map = 3
- [01-01 00:00:00.800020] usb_function_register: name = 'diag', map = 0
- [01-01 00:00:00.800020] usb_set_composition: composition set to product id = 112
- [01-01 00:00:00.800020] msm_hsusb_is_serial_num_null: rpc call success
- [01-01 00:00:00.800020] msm_hsusb_send_productID: rpc call success
- [01-01 00:00:00.800020] msm_hsusb: functions bound. starting.
- [01-01 00:00:00.800020] usb_bind_func() (diag)
- [01-01 00:00:00.800020] hml usb start !
- [01-01 00:00:00.800020] usb_function_register: name = 'modem', map = 1
- [01-01 00:00:00.800020] usb_function_register: name = 'nmea', map = 2
- [01-01 00:00:00.800020] usb_function_register: unsupported function = ethernet
- [01-01 00:00:00.800020] cdcecm init:usb function register failed
- [01-01 00:00:00.800020] msm_hsusb_phy_reset
- [01-01 00:00:01.060000] wly: synaptics_i2c_read, 8, 50,38,244,84,77,49,53,52
- [01-01 00:00:01.060000] wly: synaptics_ts_probe,max_x=1867, max_y=3096
- [01-01 00:00:01.060000] input: synaptics-rmi-touchscreen as /devices/virtual/input/input0
- [01-01 00:00:01.060000] synaptics_ts_probe: Start touchscreen synaptics-rmi-touchscreen in interrupt mode
- [01-01 00:00:01.090029] wly: cypress_ts_probe
- [01-01 00:00:01.090029] msm_i2c msm_i2c.0: Error during data xfer (-5)
- [01-01 00:00:01.090029] cypress_touch 0-000a: cypress_i2c_read FAILED: read of register 0
- [01-01 00:00:01.110018] msm_i2c msm_i2c.0: Error during data xfer (-5)
- [01-01 00:00:01.110018] cypress_touch 0-000a: cypress_i2c_read FAILED: read of register 0
- [01-01 00:00:01.130007] msm_i2c msm_i2c.0: Error during data xfer (-5)
- [01-01 00:00:01.130007] cypress_touch 0-000a: cypress_i2c_read FAILED: read of register 0
- [01-01 00:00:01.150026] cypress_touch: probe of 0-000a failed with error -1
- [01-01 00:00:01.150026] msm_rpc_client_req: RPC call was not successful (3)
- [01-01 00:00:01.150026] rs30000048 rs30000048.65536: rtc core: registered msm_rtc as rtc0
- [01-01 00:00:01.150026] rs30000048 rs30000048.65536: rtc core: registered msm_rtc_secure as rtc1
- [01-01 00:00:01.150026] i2c /dev entries driver
- [01-01 00:00:01.150026] [FM][FYA@FM_SI4708]register fm_si4708 device successful!
- [01-01 00:00:01.150026] i2c-gpio i2c-gpio.1: using pins 93 (SDA) and 92 (SCL)
- [01-01 00:00:01.150026] i2c-gpio i2c-gpio.2: using pins 109 (SDA) and 107 (SCL)
- [01-01 00:00:01.150026] [fya@akm8973]I come in akm8973 probe()!
- [01-01 00:00:01.150026] @@here init client!!@@
- [01-01 00:00:01.350008] input: compass as /devices/virtual/input/input1
- [01-01 00:00:01.350008] akm8973_probe: compass input devices register OK
- [01-01 00:00:01.350008] akm8973_probe: akmd_device register OK
- [01-01 00:00:01.350008] akm8973_probe: akm_aot_device register OK
- [01-01 00:00:01.350008] [hp@gsensor]:lis302dl G-sensor driver: init
- [01-01 00:00:01.350008] [hp@gsensor]:device id is 59
- [01-01 00:00:01.360018] [hp@gsensor]:lis302dl_probe: lis302dl_device register OK
- [01-01 00:00:01.360018] TAOS: comes into taos_init
- [01-01 00:00:01.470003] TAOS: chip id of taos that was read matches expected id in taos_probe()
- [01-01 00:00:01.470003] input: alsprox as /devices/virtual/input/input2
- [01-01 00:00:01.480013] TAOS: comes before interrupt regist
- [01-01 00:00:01.480013] charger_status = invalid, charger_type = No charger, batt_status = good , batt_level = good, batt_volt = 4149, batt_cap = 100, batt_temp = 30, chg_fulled = 0
- [01-01 00:00:01.480013] Bluetooth: HCI UART driver ver 2.2
- [01-01 00:00:01.480013] Bluetooth: HCI H4 protocol initialized
- [01-01 00:00:01.480013] Bluetooth: HCI BCSP protocol initialized
- [01-01 00:00:01.480013] Bluetooth: MSM Sleep Mode Driver Ver 1.1
- [01-01 00:00:01.480013] mmc0: No card detect facilities available
- [01-01 00:00:01.480013] mmc0: Qualcomm MSM SDCC at 0x00000000a0400000 irq 24,0 dma 8
- [01-01 00:00:01.480013] mmc0: 8 bit data mode disabled
- [01-01 00:00:01.480013] mmc0: 4 bit data mode enabled
- [01-01 00:00:01.480013] mmc0: polling status mode enabled
- [01-01 00:00:01.480013] mmc0: MMC clock 144000 -> 49152000 Hz, PCLK 100000000 Hz
- [01-01 00:00:01.480013] mmc0: Slot eject status = 0
- [01-01 00:00:01.480013] mmc0: Power save feature enable = 1
- [01-01 00:00:01.480013] mmc0: Dummy52 feature enable = 0
- [01-01 00:00:01.480013] mmc0: DM non-cached buffer at ffc13000, dma_addr 0x2f0d1000
- [01-01 00:00:01.480013] mmc0: DM cmd busaddr 0x2f0d1000, cmdptr busaddr 0x2f0d1300
- [01-01 00:00:01.480013] msm_sdcc_register_status_notify: callback 80263230 devid ac6ed1c0
- [01-01 00:00:01.490023] usb_lpm_enter: usb in low power mode
- [01-01 00:00:01.490023] hsusb: IDLE -> OFFLINE
- [01-01 00:00:01.490023] mmc1: Qualcomm MSM SDCC at 0x00000000a0500000 irq 26,0 dma 8
- [01-01 00:00:01.490023] mmc1: 8 bit data mode disabled
- [01-01 00:00:01.490023] mmc1: 4 bit data mode enabled
- [01-01 00:00:01.490023] mmc1: polling status mode disabled
- [01-01 00:00:01.490023] mmc1: MMC clock 144000 -> 49152000 Hz, PCLK 100000000 Hz
- [01-01 00:00:01.490023] mmc1: Slot eject status = 0
- [01-01 00:00:01.490023] mmc1: Power save feature enable = 1
- [01-01 00:00:01.490023] mmc1: Dummy52 feature enable = 1
- [01-01 00:00:01.490023] mmc1: DM non-cached buffer at ffc14000, dma_addr 0x2f0d7000
- [01-01 00:00:01.490023] mmc1: DM cmd busaddr 0x2f0d7000, cmdptr busaddr 0x2f0d7300
- [01-01 00:00:01.490023] Registered led device: button-backlight
- [01-01 00:00:01.490023] Registered led device: red
- [01-01 00:00:01.490023] Registered led device: green
- [01-01 00:00:01.490023] __msm_rpc_connect: server not found 30000061:30001
- [01-01 00:00:01.490023] __msm_rpc_connect: server not found 30000061:20001
- [01-01 00:00:01.490023] logger: created 64K log 'log_main'
- [01-01 00:00:01.490023] logger: created 256K log 'log_events'
- [01-01 00:00:01.490023] logger: created 64K log 'log_radio'
- [01-01 00:00:01.490023] ram_console: got buffer at 2900000, size 100000
- [01-01 00:00:01.490023] ram_console: no valid data in buffer (sig = 0x00000000)
- [01-01 00:00:01.490023] console [ram-1] enabled
- [01-01 00:00:01.490023] Advanced Linux Sound Architecture Driver Version 1.0.18a.
- [01-01 00:00:01.490023] No device for DAI CODEC_DAI
- [01-01 00:00:01.490023] No device for DAI CPU_DAI
- [01-01 00:00:01.500002] msm_soc: create pcms
- [01-01 00:00:01.500002] asoc: CODEC_DAI <-> CPU_DAI mapping ok
- [01-01 00:00:01.500002] msm_soc: ALSA MSM Mixer Setting
- [01-01 00:00:01.500002] ALSA device list:
- [01-01 00:00:01.500002] #0: msm-audio (MSM-CARD)
- [01-01 00:00:01.500002] xt_time: kernel timezone is -0000
- [01-01 00:00:01.500002] ip_tables: (C) 2000-2006 Netfilter Core Team
- [01-01 00:00:01.500002] TCP cubic registered
- [01-01 00:00:01.500002] NET: Registered protocol family 10
- [01-01 00:00:01.500002] IPv6 over IPv4 tunneling driver
- [01-01 00:00:01.500002] NET: Registered protocol family 17
- [01-01 00:00:01.500002] Bluetooth: L2CAP ver 2.13
- [01-01 00:00:01.500002] Bluetooth: L2CAP socket layer initialized
- [01-01 00:00:01.500002] Bluetooth: SCO (Voice Link) ver 0.6
- [01-01 00:00:01.500002] Bluetooth: SCO socket layer initialized
- [01-01 00:00:01.500002] Bluetooth: RFCOMM socket layer initialized
- [01-01 00:00:01.500002] Bluetooth: RFCOMM TTY layer initialized
- [01-01 00:00:01.500002] Bluetooth: RFCOMM ver 1.11
- [01-01 00:00:01.500002] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
- [01-01 00:00:01.500002] Bluetooth: BNEP filters: protocol multicast
- [01-01 00:00:01.500002] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
- [01-01 00:00:01.500002] RPC: Registered udp transport module.
- [01-01 00:00:01.500002] RPC: Registered tcp transport module.
- [01-01 00:00:01.500002] clock_late_init() disabled 17 unused clocks
- [01-01 00:00:01.500002] input: 7k_handset as /devices/virtual/input/input3
- [01-01 00:00:01.500002] --keycode from A9(charger)
- [01-01 00:00:01.500002] key:143 keycode:121
- [01-01 00:00:01.500002] No pity! update battery event
- [01-01 00:00:01.500002] --keycode from A9(charger)
- [01-01 00:00:01.500002] key:143 keycode:255
- [01-01 00:00:01.500002] No pity! update battery event
- [01-01 00:00:01.510012] VFP support v0.3: implementor 41 architecture 1 part 20 variant b rev 5
- [01-01 00:00:01.510012] kgsl kgsl: |kgsl_platform_probe| clk_get(grp_2d_clk) returned 0
- [01-01 00:00:01.520022] [drm] Initialized kgsl 2.0.0 20090810 on minor 0
- [01-01 00:00:01.520022] msm_v4l2: msm_v4l2_init
- [01-01 00:00:01.520022] msmrtc_tod_proc_result: 01/16/2011 00:01:56 (06)
- [01-16 00:01:56.500000] rs30000048 rs30000048.65536: setting system clock to 2011-01-16 00:01:56 UTC (1295136116)
- [01-16 00:01:56.500000] Freeing init memory: 136K
- [01-16 00:01:56.500000] Warning: unable to open an initial console.
- [01-16 00:01:56.503967] usb:msm_hsusb_store_default_pid: use_default_pid 0 bound 1
- [01-16 00:01:56.563995] mmc0: host does not support reading read-only switch. assuming write-enable.
- [01-16 00:01:56.563995] mmc0: new high speed SDHC card at address 0001
- [01-16 00:01:56.563995] mmcblk0: mmc0:0001 00000 7.60 GiB
- [01-16 00:01:56.563995] mmcblk0: p1
- [01-16 00:01:56.693969] init: cannot open '/initlogo.rle'
- [01-16 00:01:56.733978] init: Unable to open persistent property directory /data/property errno: 2
- [01-16 00:01:56.743988] [PM] reboot reason = 0x77665502
- [01-16 00:01:56.743988] Restarting system with command 'recovery'.
- [01-16 00:01:56.743988] smd_close(acb2a600)
- welcome to lk
- calling constructors
- initializing heap
- initializing threads
- initializing dpc
- initializing timers
- creating bootstrap completion thread
- top of bootstrap2()
- initializing flash
- nandcfg: 0 0 (initial)
- nandcfg(Apps): a85408c0 4745e (used)
- nandcfg(Modem): aa5400c0 4745e (used)
- initializing platform
- platform_init()
- flash_read_image: success (0 errors)
- [hp@lcd&fb]:lcd module init exit
- !initializing target
- target_init()
- 0: 0:MIBIB offs=0x00000000 size=0x0000000a attr: 0x00ffffff
- 1: 0:QCSBL offs=0x0000000a size=0x00000002 attr: 0x00ffffff
- 2: 0:OEMSBL1 offs=0x0000000c size=0x00000005 attr: 0x00ffffff
- 3: 0:OEMSBL2 offs=0x00000011 size=0x00000005 attr: 0x00ffffff
- 4: 0:AMSS offs=0x00000016 size=0x000000d4 attr: 0x00ffffff
- 5: 0:APPSBL offs=0x000000ea size=0x00000003 attr: 0x00ffffff
- 6: 0:FOTA offs=0x000000ed size=0x00000002 attr: 0x00ffffff
- 7: 0:EFS2 offs=0x000000ef size=0x00000060 attr: 0x00ffffff
- 8: 0:APPS offs=0x0000014f size=0x00000002 attr: 0x00ffffff
- 9: 0:FTL offs=0x00000151 size=0x00000005 attr: 0x00ff0101
- 10: 0:EFS2APPS offs=0x00000156 size=0xffffffff attr: 0x00ffffff
- smem ptable found: ver: 3 len: 11
- ptn 0 name='recovery' start=00000156 len=00000024 flags=00000000 type=Apps Writable=Yes
- ptn 1 name='boot' start=0000017a len=00000024 flags=00000000 type=Apps Writable=Yes
- ptn 2 name='splash' start=0000019e len=0000000c flags=00000000 type=Apps Writable=Yes
- ptn 3 name='misc' start=000001aa len=00000003 flags=00000000 type=Apps Writable=Yes
- ptn 4 name='cache' start=000001ad len=0000014a flags=00000000 type=Apps Writable=Yes
- ptn 5 name='system' start=000002f7 len=0000067c flags=00000000 type=Apps Writable=Yes
- ptn 6 name='userdata' start=00000973 len=00000681 flags=00000000 type=Apps Writable=Yes
- ptn 7 name='persist' start=00000ff4 len=0000000c flags=00000000 type=Apps Writable=Yes
- ptn 8 name='MIBIB' start=00000000 len=0000000a flags=00000000 type=Modem Writable=Yes
- ptn 9 name='QCSBL' start=0000000a len=00000002 flags=00000000 type=Modem Writable=Yes
- ptn 10 name='OEMSBL1' start=0000000c len=00000005 flags=00000000 type=Modem Writable=Yes
- ptn 11 name='OEMSBL2' start=00000011 len=00000005 flags=00000000 type=Modem Writable=Yes
- ptn 12 name='AMSS' start=00000016 len=000000d4 flags=00000000 type=Modem Writable=Yes
- ptn 13 name='APPSBL' start=000000ea len=00000003 flags=00000000 type=Modem Writable=Yes
- ptn 14 name='FOTA' start=000000ed len=00000002 flags=00000000 type=Modem Writable=Yes
- ptn 15 name='EFS2' start=000000ef len=00000060 flags=00000000 type=Modem Writable=Yes
- ptn 16 name='APPS' start=0000014f len=00000002 flags=00000000 type=Modem Writable=Yes
- ptn 17 name='FTL' start=00000151 len=00000005 flags=00000000 type=Modem Writable=Yes
- ptn 18 name='EFS2APPS' start=00000156 len=ffffffff flags=00000000 type=Modem Writable=Yes
- calling apps_init()
- [ZYF.BOOT] FTM NV = 2
- jiangfeng: g_boot_key_exit_ftm = 0, first time
- flash_read_image: success (0 errors)
- flash_read_image: success (0 errors)
- flash_read_image: success (0 errors)
- kernel @ 3008000 (2252416 bytes)
- ramdisk @ 4000000 (833566 bytes)
- cmdline = 'rdinit=/init console=ttyDCC0 console=ttyMSM2,115200'
- Booting Linux
- booting linux @ 0x3008000, ramdisk @ 0x4000000 (833566)
- cmdline: rdinit=/init console=ttyDCC0 console=ttyMSM2,115200
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement