API tools faq
paste
Advertisement
Guest User

beaglexm

a guest
Jul 11th, 2013
113
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 13.54 KB | None | 0 0
raw download clone embed print report
  1. U-Boot SPL 2013.07-rc2-00043-g047afeb (Jul 11 2013 - 16:37:27)
  2. OMAP SD/MMC: 0
  3. reading u-boot.img
  4. reading u-boot.img
  5.  
  6.  
  7. U-Boot 2013.07-rc2-00043-g047afeb (Jul 11 2013 - 16:37:27)
  8.  
  9. OMAP36XX/37XX-GP ES1.2, CPU-OPP2, L3-165MHz, Max CPU Clock 1 Ghz
  10. OMAP3 Beagle board + LPDDR/NAND
  11. I2C: ready
  12. DRAM: 512 MiB
  13. NAND: 0 MiB
  14. MMC: OMAP SD/MMC: 0
  15. *** Warning - readenv() failed, using default environment
  16.  
  17. In: serial
  18. Out: serial
  19. Err: serial
  20. Beagle xM Rev C
  21. No EEPROM on expansion board
  22. Die ID #409600029ff800000168300f0d00c008
  23. musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn)
  24. musb-hdrc: MHDRC RTL version 1.800
  25. musb-hdrc: setup fifo_mode 4
  26. musb-hdrc: 28/31 max ep, 16384/16384 memory
  27. USB Peripheral mode controller at 480ab000 using PIO, IRQ 0
  28. Net: usb_ether
  29. Hit any key to stop autoboot: 0
  30. mmc0 is current device
  31. gpio: pin 173 (gpio 173) value is 0
  32. gpio: pin 4 (gpio 4) value is 0
  33. SD/MMC found on device 0
  34. reading uEnv.txt
  35. 23 bytes read in 10 ms (2 KiB/s)
  36. Loaded environment from uEnv.txt
  37. Importing environment from mmc ...
  38. reading //uImage
  39. ** Unable to read file //uImage **
  40. Booting from nand ...
  41.  
  42. no devices available
  43. Wrong Image Format for bootm command
  44. ERROR: can't get kernel image!
  45. reading //zImage
  46. 4051560 bytes read in 262 ms (14.7 MiB/s)
  47. reading //omap3-beagle-xm.dtb
  48. 12099 bytes read in 11 ms (1 MiB/s)
  49. Booting with DT from mmc0 ...
  50. Kernel image @ 0x80200000 [ 0x000000 - 0x3dd268 ]
  51. ## Flattened Device Tree blob at 80f80000
  52. Booting using the fdt blob at 0x80f80000
  53. Using Device Tree in place at 80f80000, end 80f85f42
  54.  
  55. Starting kernel ...
  56.  
  57. [ 0.000000] Booting Linux on physical CPU 0x0
  58. [ 0.000000] Linux version 3.10.0-08840-g7a4851e (nmenon@kahuna) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #1 SMP Thu Jul 11 07:59:07 CDT 2013
  59. [ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c53c7d
  60. [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
  61. [ 0.000000] Machine: Generic OMAP3 (Flattened Device Tree), model: TI OMAP3 BeagleBoard xM
  62. [ 0.000000] cma: CMA: reserved 16 MiB at 9e800000
  63. [ 0.000000] Memory policy: ECC disabled, Data cache writeback
  64. [ 0.000000] CPU: All CPU(s) started in SVC mode.
  65. [ 0.000000] OMAP3630 ES1.2 (l2cache iva sgx neon isp 192mhz_clk )
  66. [ 0.000000] PERCPU: Embedded 9 pages/cpu @c1391000 s14208 r8192 d14464 u36864
  67. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129792
  68. [ 0.000000] Kernel command line: console=ttyO2,115200n8 mpurate=auto buddy=none camera=none vram=12M omapfb.mode=dvi:640x480MR-16@60 omapdss.def_disp=dvi root=/dev/mmcblk0p2 rw rootfstype=ext3 rootwait
  69. [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
  70. [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
  71. [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
  72. [ 0.000000] Memory: 488468K/523264K available (5267K kernel code, 630K rwdata, 1940K rodata, 377K init, 5522K bss, 34796K reserved, 0K highmem)
  73. [ 0.000000] Virtual kernel memory layout:
  74. [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  75. [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
  76. [ 0.000000] vmalloc : 0xe0800000 - 0xff000000 ( 488 MB)
  77. [ 0.000000] lowmem : 0xc0000000 - 0xe0000000 ( 512 MB)
  78. [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
  79. [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
  80. [ 0.000000] .text : 0xc0008000 - 0xc0712144 (7209 kB)
  81. [ 0.000000] .init : 0xc0713000 - 0xc0771780 ( 378 kB)
  82. [ 0.000000] .data : 0xc0772000 - 0xc080fa40 ( 631 kB)
  83. [ 0.000000] .bss : 0xc080fa40 - 0xc0d74470 (5523 kB)
  84. [ 0.000000] Hierarchical RCU implementation.
  85. [ 0.000000] RCU restricting CPUs from NR_CPUS=2 to nr_cpu_ids=1.
  86. [ 0.000000] NR_IRQS:16 nr_irqs:16 16
  87. [ 0.000000] IRQ: Found an INTC at 0xfa200000 (revision 4.0) with 96 interrupts
  88. [ 0.000000] Total of 96 interrupts on 1 active controller
  89. [ 0.000000] Clocking rate (Crystal/Core/MPU): 26.0/400/600 MHz
  90. [ 0.000000] OMAP clockevent source: timer1 at 32768 Hz
  91. [ 0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 131071999ms
  92. [ 0.000000] OMAP clocksource: 32k_counter at 32768 Hz
  93. [ 0.000000] Console: colour dummy device 80x30
  94. [ 0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
  95. [ 0.000000] ... MAX_LOCKDEP_SUBCLASSES: 8
  96. [ 0.000000] ... MAX_LOCK_DEPTH: 48
  97. [ 0.000000] ... MAX_LOCKDEP_KEYS: 8191
  98. [ 0.000000] ... CLASSHASH_SIZE: 4096
  99. [ 0.000000] ... MAX_LOCKDEP_ENTRIES: 16384
  100. [ 0.000000] ... MAX_LOCKDEP_CHAINS: 32768
  101. [ 0.000000] ... CHAINHASH_SIZE: 16384
  102. [ 0.000000] memory used by lock dependency info: 3695 kB
  103. [ 0.000000] per task-struct memory footprint: 1152 bytes
  104. [ 0.001281] Calibrating delay loop... 395.67 BogoMIPS (lpj=1978368)
  105. [ 0.109710] pid_max: default: 32768 minimum: 301
  106. [ 0.110229] Security Framework initialized
  107. [ 0.110412] Mount-cache hash table entries: 512
  108. [ 0.124847] CPU: Testing write buffer coherency: ok
  109. [ 0.126464] CPU0: thread -1, cpu 0, socket -1, mpidr 0
  110. [ 0.126525] Setting up static identity map for 0xc04fec40 - 0xc04fecb0
  111. [ 0.130279] Brought up 1 CPUs
  112. [ 0.130310] SMP: Total of 1 processors activated (395.67 BogoMIPS).
  113. [ 0.130310] CPU: All CPU(s) started in SVC mode.
  114. [ 0.133789] devtmpfs: initialized
  115. [ 0.215454] pinctrl core: initialized pinctrl subsystem
  116. [ 0.220947] regulator-dummy: no parameters
  117. [ 0.224853] NET: Registered protocol family 16
  118. [ 0.234161] DMA: preallocated 256 KiB pool for atomic coherent allocations
  119. [ 0.251098] Reprogramming SDRC clock to 400000000 Hz
  120. [ 0.260559] omap_gpio 48310000.gpio: could not find pctldev for node /ocp/pinmux@0x48002a00/pinmux_gpio1_pins, deferring probe
  121. [ 0.260650] platform 48310000.gpio: Driver omap_gpio requests probe deferral
  122. [ 0.265747] OMAP GPIO hardware version 2.5
  123. [ 0.294006] platform 49022000.mcbsp: alias fck already exists
  124. [ 0.295410] platform 49024000.mcbsp: alias fck already exists
  125. [ 0.312377] omap-gpmc 6e000000.gpmc: GPMC revision 5.0
  126. [ 0.317565] No ATAGs?
  127. [ 0.317596] hw-breakpoint: debug architecture 0x4 unsupported.
  128. [ 0.324676] OMAP DMA hardware revision 5.0
  129. [ 0.402038] bio: create slab <bio-0> at 0
  130. [ 0.497589] omap-dma-engine 48056000.dma-controller: OMAP DMA engine driver
  131. [ 0.507781] SCSI subsystem initialized
  132. [ 0.510955] usbcore: registered new interface driver usbfs
  133. [ 0.511566] usbcore: registered new interface driver hub
  134. [ 0.512481] usbcore: registered new device driver usb
  135. [ 0.515624] omap_i2c i2c.8: did not get pins for i2c error: -19
  136. [ 0.517700] omap_i2c i2c.8: bus 0 rev4.4 at 2600 kHz
  137. [ 0.520507] omap_i2c i2c.9: did not get pins for i2c error: -19
  138. [ 0.521942] omap_i2c i2c.9: bus 1 rev4.4 at 400 kHz
  139. [ 0.522186] omap_i2c i2c.10: did not get pins for i2c error: -19
  140. [ 0.523498] omap_i2c i2c.10: bus 2 rev4.4 at 100 kHz
  141. [ 0.535614] Switched to clocksource 32k_counter
  142. [ 0.702484] NET: Registered protocol family 2
  143. [ 0.704742] TCP established hash table entries: 4096 (order: 3, 32768 bytes)
  144. [ 0.705078] TCP bind hash table entries: 4096 (order: 5, 147456 bytes)
  145. [ 0.707550] TCP: Hash tables configured (established 4096 bind 4096)
  146. [ 0.707824] TCP: reno registered
  147. [ 0.707855] UDP hash table entries: 256 (order: 2, 20480 bytes)
  148. [ 0.708190] UDP-Lite hash table entries: 256 (order: 2, 20480 bytes)
  149. [ 0.709960] NET: Registered protocol family 1
  150. [ 0.712066] RPC: Registered named UNIX socket transport module.
  151. [ 0.712097] RPC: Registered udp transport module.
  152. [ 0.712127] RPC: Registered tcp transport module.
  153. [ 0.712127] RPC: Registered tcp NFSv4.1 backchannel transport module.
  154. [ 0.713378] NetWinder Floating Point Emulator V0.97 (double precision)
  155. [ 0.713684] hw perfevents: enabled with ARMv7 Cortex-A8 PMU driver, 5 counters available
  156. [ 0.936370] VFS: Disk quotas dquot_6.5.2
  157. [ 0.936706] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  158. [ 0.939788] NFS: Registering the id_resolver key type
  159. [ 0.940307] Key type id_resolver registered
  160. [ 0.940338] Key type id_legacy registered
  161. [ 0.940490] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
  162. [ 0.941131] msgmni has been set to 986
  163. [ 0.945922] io scheduler noop registered
  164. [ 0.945953] io scheduler deadline registered
  165. [ 0.946075] io scheduler cfq registered (default)
  166. [ 0.949279] pinctrl-single 48002030.pinmux: 742 pins at pa fa002030 size 1484
  167. [ 0.950012] pinctrl-single 48002a00.pinmux: 46 pins at pa fa002a00 size 92
  168. [ 0.955200] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
  169. [ 0.963562] omap_uart serial.5: did not get pins for uart0 error: -19
  170. [ 0.964874] serial.5: ttyO0 at MMIO 0x4806a000 (irq = 88) is a OMAP UART0
  171. [ 0.967529] omap_uart serial.6: did not get pins for uart1 error: -19
  172. [ 0.968109] serial.6: ttyO1 at MMIO 0x4806c000 (irq = 89) is a OMAP UART1
  173. [ 0.970642] serial.7: ttyO2 at MMIO 0x49020000 (irq = 90) is a OMAP UART2
  174. [ 1.684814] console [ttyO2] enabled
  175. [ 1.690643] omap_uart serial.17: did not get pins for uart3 error: -19
  176. [ 1.699066] serial.17: ttyO3 at MMIO 0x49042000 (irq = 96) is a OMAP UART3
  177. [ 1.746246] brd: module loaded
  178. [ 1.772674] loop: module loaded
  179. [ 1.789276] twl 0-0048: PIH (irq 23) chaining IRQs 306..314
  180. [ 1.795959] twl 0-0048: power (irq 311) chaining IRQs 314..321
  181. [ 1.809082] VDD1: 600 <--> 1450 mV at 1200 mV
  182. [ 1.817535] VDAC: 1800 mV
  183. [ 1.823577] VPLL2: 1800 mV
  184. [ 1.829650] VMMC1: 1850 <--> 3150 mV at 3150 mV
  185. [ 1.837524] VUSB1V5: 1500 mV
  186. [ 1.843078] VUSB1V8: 1800 mV
  187. [ 1.848846] VUSB3V1: 3100 mV
  188. [ 1.854583] VSIM: 1800 <--> 3000 mV at 1800 mV
  189. [ 1.862945] twl4030_gpio gpio.33: gpio (irq 306) chaining IRQs 322..339
  190. [ 1.884521] mtdoops: mtd device (mtddev=name/number) must be supplied
  191. [ 1.909759] usbcore: registered new interface driver asix
  192. [ 1.916687] usbcore: registered new interface driver ax88179_178a
  193. [ 1.923797] usbcore: registered new interface driver cdc_ether
  194. [ 1.930938] usbcore: registered new interface driver smsc95xx
  195. [ 1.937866] usbcore: registered new interface driver net1080
  196. [ 1.944396] usbcore: registered new interface driver cdc_subset
  197. [ 1.951354] usbcore: registered new interface driver zaurus
  198. [ 1.958038] usbcore: registered new interface driver cdc_ncm
  199. [ 1.966766] usbcore: registered new interface driver cdc_wdm
  200. [ 1.973388] usbcore: registered new interface driver usb-storage
  201. [ 1.980529] usbcore: registered new interface driver usbtest
  202. [ 1.989227] mousedev: PS/2 mouse device common for all mice
  203. [ 2.002410] twl_rtc rtc.23: Enabling TWL-RTC
  204. [ 2.011657] twl_rtc rtc.23: rtc core: registered rtc.23 as rtc0
  205. [ 2.020233] i2c /dev entries driver
  206. [ 2.029113] Driver for 1-wire Dallas network protocol.
  207. [ 2.040130] omap_wdt: OMAP Watchdog Timer Rev 0x31: initial timeout 60 sec
  208. [ 2.054840] omap-dma-engine 48056000.dma-controller: allocating channel for 62
  209. [ 2.062866] omap-dma-engine 48056000.dma-controller: allocating channel for 61
  210. [ 2.073486] omap_hsmmc mmc.15: pins are not configured from the driver
  211. [ 2.129333] ledtrig-cpu: registered to indicate activity on CPUs
  212. [ 2.140045] usbcore: registered new interface driver usbhid
  213. [ 2.146118] usbhid: USB HID core driver
  214. [ 2.152069] oprofile: using arm/armv7
  215. [ 2.157073] TCP: cubic registered
  216. [ 2.160583] Initializing XFRM netlink socket
  217. [ 2.165222] NET: Registered protocol family 17
  218. [ 2.170135] NET: Registered protocol family 15
  219. [ 2.175262] Key type dns_resolver registered
  220. [ 2.180084] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
  221. [ 2.190643] ThumbEE CPU extension supported.
  222. [ 2.200866] VPLL2: disabling
  223. [ 2.204681] VDAC: disabling
  224. [ 2.221252] mmc0: host does not support reading read-only switch. assuming write-enable.
  225. [ 2.230926] input: gpio_keys.21 as /devices/gpio_keys.21/input/input0
  226. [ 2.239959] mmc0: new high speed SDHC card at address 1234
  227. [ 2.251861] twl_rtc rtc.23: setting system clock to 2000-01-01 01:03:50 UTC (946688630)
  228. [ 2.264434] mmcblk0: mmc0:1234 SA04G 3.63 GiB
  229. [ 2.276885] mmcblk0: p1 p2
  230. [ 8.231536] kjournald starting. Commit interval 5 seconds
  231. [ 8.972869] EXT3-fs (mmcblk0p2): using internal journal
  232. [ 8.983886] EXT3-fs (mmcblk0p2): recovery complete
  233. [ 8.989044] EXT3-fs (mmcblk0p2): mounted filesystem with ordered data mode
  234. [ 8.996551] VFS: Mounted root (ext3 filesystem) on device 179:2.
  235. [ 9.009460] devtmpfs: mounted
  236. [ 9.013519] Freeing unused kernel memory: 376K (c0713000 - c0771000)
  237. Mounting proc : OK
  238. Mounting sysfs : OK
  239. Mounting devtmpfs:mount: mounting none on /dev failed: Device or resource busy
  240. boot mounted: OK
  241. /dev/ttyO2 linked to /dev/tty-bd - using as console
  242.  
  243. ******************************************
  244. Starting System Init for GenericOMAP3(FlattenedDeviceTree)
  245. Release: X.x
  246. Kernel: Linux GenericOMAP3(FlattenedDeviceTree) 3.10.0-08840-g7a4851e #1 SMP Thu Jul 11 07:59:07 CDT 2013 armv7l GNU/Linux
  247. ******************************************
  248. Saving kernel ring buffer : OK
  249. Mounting devpts : OK
  250. Setting up networking
  251. Configuring lo : OK
  252. Starting syslogd : OK
  253. Starting klogd : OK
  254. Mounting filesystems : OK
  255. mount: mounting none on /proc/bus/usb/ failed: No such file or directory
  256.  
  257. Please press Enter to activate this console.
  258. / #
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!