Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- Enabling VAUX for wifi
- omap-iommu omap-iommu.0: isp registered
- iovmm-omap initialized isp, major: 253, base-minor: 0
- ashmem: initialized
- VFS: Disk quotas dquot_6.5.2
- Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
- Slow work thread pool: Starting up
- Slow work thread pool: Ready
- msgmni has been set to 960
- alg: No test for stdrng (krng)
- io scheduler noop registered
- io scheduler anticipatory registered
- io scheduler deadline registered
- io scheduler cfq registered
- io scheduler bfq registered (default)
- OMAP DSS rev 2.0
- OMAP DISPC rev 3.0
- dsi_init calling
- OMAP DSI rev 1.0
- Enabling power for LCD
- spi_probe mode : 0, per_word 16, chip_select 0, speed 375000, master_bus 4,master_cs 1
- omap-hsuart.0: ttyO0 at MMIO 0x4806a000 (irq = 72) is a OMAP UART0
- Initializing cgroup subsys cpu
- Linux version 2.6.32.9 (erik@myhost) (gcc version 4.4.1 (Sourcery G++ Lite 2010q1-188) ) #171 PREEMPT Mon Oct 24 21:41:48 CDT 2011
- CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c53c7f
- CPU: VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
- Machine: encore
- Ignoring unrecognised tag 0x54410008
- Memory policy: ECC disabled, Data cache writeback
- On node 0 totalpages: 131072
- free_area_init_node: node 0, pgdat c0637f50, node_mem_map c0702000
- Normal zone: 1024 pages used for memmap
- Normal zone: 0 pages reserved
- Normal zone: 130048 pages, LIFO batch:31
- DIE ID: 535E00029EDC0000015EF5500602800F
- OMAP3630 ES1.2 (l2cache iva sgx neon isp 192mhz_clk )
- omap_sam_base (VA) == 0xfe400000
- omap_sram_start (PA) == 0x40200000
- omap_sram_size (SIZE) == 0x10000
- SRAM: Mapped pa 0x40200000 to va 0xfe400000 size: 0x100000
- Reserving 14745600 bytes SDRAM for VRAM
- Built 1 zonelists in Zone order, mobility grouping on. Total pages: 130048
- Kernel command line: console=ttyO0,115200n8 rw init=/init videoout=omap24xxvout omap_vout_mod.video1_numbuffers=6 omap_vout_mod.vid1_static_vrfb_alloc=y omap_vout_mod.video2_numbuffers=6 omap_vout_mod.vid2_static_vrfb_alloc=y omapfb.vram=0:8M no_console_suspend
- PID hash table entries: 2048 (order: 1, 8192 bytes)
- Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
- Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
- Memory: 256MB 256MB = 512MB total
- Memory: 491520KB available (5684K code, 1103K data, 180K init, 0K highmem)
- Virtual kernel memory layout:
- vector : 0xffff0000 - 0xffff1000 ( 4 kB)
- fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
- vmalloc : 0xe0800000 - 0xf8000000 ( 376 MB)
- lowmem : 0xc0000000 - 0xe0000000 ( 512 MB)
- pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
- modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
- .init : 0xc0008000 - 0xc0035000 ( 180 kB)
- .text : 0xc0035000 - 0xc05c2000 (5684 kB)
- .data : 0xc05ea000 - 0xc063c4d8 ( 330 kB)
- NR_IRQS:402
- IRQ: Found an INTC at 0xfa200000 (revision 4.0) with 96 interrupts
- Total of 96 interrupts on 1 active controller
- Clocking rate (Crystal/Core/MPU): 26.0/332/600 MHz
- Reprogramming SDRC clock to 332000000 Hz
- GPMC revision 5.0
- OMAP GPIO hardware version 2.5
- OMAP clockevent source: GPTIMER1 at 32768 Hz
- Console: colour dummy device 80x30
- Calibrating delay loop... 598.53 BogoMIPS (lpj=583680)
- Mount-cache hash table entries: 512
- Initializing cgroup subsys freezer
- Initializing cgroup subsys bfqio
- CPU: Testing write buffer coherency: ok
- regulator: core version 0.5
- NET: Registered protocol family 16
- ram_console: got buffer at 8e000000, size 20000
- ram_console: found existing buffer, size 26176, start 26176
- console [ram-1] enabled
- board-3621_evt1a.c: audio_dac_3100_dev_init ...
- board-3621_evt1a.c: audio_dac_3100_dev_init > set AUDIO_CODEC_RESET_GPIO to output Low!
- board-3621_evt1a.c: audio_dac_3100_dev_init ...
- board-3621_evt1a.c: audio_dac_3100_dev_init > set AUDIO_CODEC_POWER_ENABLE_GPIO to output and value high!
- board-3621_evt1a.c: audio_dac_3100_dev_init > set AUDIO_CODEC_RESET_GPIO to output and value high!
- Enabling backlight PWM for LCD
- board-3621_evt1a.c: kxtf9_dev_init ...
- board-3621_evt1a.c: kxtf9_dev_init > Init kxtf9 irq pin 113 !
- board-3621_evt1a.c: max17042_dev_init ...
- board-3621_evt1a.c: max17042_dev_init > Init max17042 irq pin 100 !
- max17042 GPIO pin read 1
- CPU variant: OMAP3621 Board: 800MHz only
- encore: registering wl127x device.
- encore: registering btwilink device.
- OMAP DMA hardware revision 5.0
- bio: create slab <bio-0> at 0
- regulator: vdd_lcdtp: 3300 mV normal
- SCSI subsystem initialized
- usbcore: registered new interface driver usbfs
- usbcore: registered new interface driver hub
- usbcore: registered new device driver usb
- i2c_omap i2c_omap.1: bus 1 rev4.0 at 100 kHz
- TWL4030: Bad order of scripts (sleep script before wakeup) Leads to bootfailure on some boards
- twl4030: PIH (irq 7) chaining IRQs 368..375
- twl4030: power (irq 373) chaining IRQs 376..383
- twl4030: gpio (irq 368) chaining IRQs 384..401
- SD/MMC devices, enumerating first eMMC.
- SD/MMC devices, checking for SD card devices attached.
- regulator: VUSB1V5: 1500 mV normal standby
- regulator: VUSB1V8: 1800 mV normal standby
- regulator: VUSB3V1: 3100 mV normal standby
- twl4030_usb twl4030_usb: USB_DTCT_CTRL=04
- twl4030_usb twl4030_usb: HW_CONDITIONS 0xf0/240; link 1
- twl4030_usb twl4030_usb: twl4030_usb_set_mode: ULPI mode
- twl4030_usb twl4030_usb: Initialized TWL4030 USB module, charger detection activated
- regulator: VMMC1: 1850 <--> 3150 mV at 3000 mV normal standby
- i2c_omap i2c_omap.2: bus 2 rev4.0 at 400 kHz
- Sangoma WANPIPE Router v1.1 (c) 1995-2000 Sangoma Technologies Inc.
- Bluetooth: Core ver 2.15
- NET: Registered protocol family 31
- Bluetooth: HCI device and connection manager initialized
- Bluetooth: HCI socket layer initialized
- Switching to clocksource 32k_counter
- musb_hdrc: version 6.0, musb-dma, otg (peripheral+host), debug=0
- HS USB OTG: revision 0x40, sysconfig 0x2005, sysstatus 0x1, intrfsel 0x1, simenable 0x0
- musb_hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine (X), bulk split (X), HB-ISO Rx, HB-ISO Tx, SoftConn)
- musb_hdrc: MHDRC RTL version 1.800
- musb_hdrc: setup fifo_mode 4
- musb_hdrc: 28/31 max ep, 16384/16384 memory
- musb_hdrc: USB OTG mode controller at fa0ab000 using DMA, IRQ 92
- NET: Registered protocol family 2
- IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
- TCP established hash table entries: 16384 (order: 5, 131072 bytes)
- TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
- TCP: Hash tables configured (established 16384 bind 16384)
- TCP reno registered
- NET: Registered protocol family 1
- Trying to unpack rootfs image as initramfs...
- Freeing initrd memory: 196K
- dspbridge_init: 600000 bytes @ 81a00000
- evt_wifi_init: start
- Enabling VAUX for wifi
- omap-iommu omap-iommu.0: isp registered
- iovmm-omap initialized isp, major: 253, base-minor: 0
- ashmem: initialized
- VFS: Disk quotas dquot_6.5.2
- Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
- Slow work thread pool: Starting up
- Slow work thread pool: Ready
- msgmni has been set to 960
- alg: No test for stdrng (krng)
- io scheduler noop registered
- io scheduler anticipatory registered
- io scheduler deadline registered
- io scheduler cfq registered
- io scheduler bfq registered (default)
- OMAP DSS rev 2.0
- OMAP DISPC rev 3.0
- dsi_init calling
- OMAP DSI rev 1.0
- Enabling power for LCD
- spi_probe mode : 0, per_word 16, chip_select 0, speed 375000, master_bus 4,master_cs 1
- omap-hsuart.0: ttyO0 at MMIO 0x4806a000 (irq = 72) is a OMAP UART0
- console [ttyO0] enabled
- omap-hsuart.1: ttyO1 at MMIO 0x4806c000 (irq = 73) is a OMAP UART1
- brd: module loaded
- loop: module loaded
- encore_modem_mgr: Initializing Encore Modem Manager
- (stk) :sysfs entries created
- kim: copied platform data
- (stk) : debugfs entries created
- PPP generic driver version 2.4.2
- PPP Deflate Compression module registered
- PPP BSD Compression module registered
- PPP MPPE Compression module registered
- NET: Registered protocol family 24
- PPPoL2TP kernel driver, V1.0
- tun: Universal TUN/TAP device driver, 1.6
- tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
- ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- ehci_hcd: block sizes: qh 60 qtd 96 itd 160 sitd 96
- Initializing USB Mass Storage driver...
- usbcore: registered new interface driver usb-storage
- USB Mass Storage support registered.
- usbcore: registered new interface driver usbserial
- USB Serial support registered for generic
- usbcore: registered new interface driver usbserial_generic
- usbserial: USB Serial Driver core
- USB Serial support registered for Garmin GPS usb/tty
- usbcore: registered new interface driver garmin_gps
- garmin_gps: v0.33:garmin gps driver
- USB Serial support registered for navman
- usbcore: registered new interface driver navman
- USB Serial support registered for pl2303
- usbcore: registered new interface driver pl2303
- pl2303: Prolific PL2303 USB to serial adaptor driver
- android init
- android_probe pdata: c05fbec8
- android_bind
- android_bind_config
- android_usb gadget: android_usb ready
- musb_hdrc musb_hdrc: MUSB HDRC host driver
- drivers/usb/core/inode.c: creating file 'devices'
- drivers/usb/core/inode.c: creating file '001'
- musb_hdrc musb_hdrc: new USB bus registered, assigned bus number 1
- usb usb1: default language 0x0409
- usb usb1: udev 1, busnum 1, minor = 0
- usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
- usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- usb usb1: Product: MUSB HDRC host driver
- usb usb1: Manufacturer: Linux 2.6.32.9 musb-hcd
- usb usb1: SerialNumber: musb_hdrc
- usb usb1: uevent
- usb usb1: usb_probe_device
- usb usb1: configuration #1 chosen from 1 choice
- usb usb1: adding 1-0:1.0 (config #1, interface 0)
- usb 1-0:1.0: uevent
- hub 1-0:1.0: usb_probe_interface
- hub 1-0:1.0: usb_probe_interface - got id
- hub 1-0:1.0: USB hub found
- hub 1-0:1.0: 1 port detected
- hub 1-0:1.0: standalone hub
- hub 1-0:1.0: individual port power switching
- hub 1-0:1.0: no over-current protection
- hub 1-0:1.0: power on to power good time: 10ms
- hub 1-0:1.0: 100mA bus power budget for each child
- hub 1-0:1.0: local power source is good
- hub 1-0:1.0: enabling power on all ports
- drivers/usb/core/inode.c: creating file '001'
- f_adb init
- android_register_function adb
- f_mass_storage init
- android_register_function usb_mass_storage
- mass_storage_bind_config
- fsg_probe pdata: c05fb258
- android_usb gadget: Number of LUNs=2
- adb_bind_config
- mice: PS/2 mouse device common for all mice
- input: gpio-keys as /devices/platform/gpio-keys/input/input0
- input: twl4030-keypad as /devices/platform/i2c_omap.1/i2c-1/1-004a/twl4030_keypad/input/input1
- usbcore: registered new interface driver xpad
- xpad: X-Box pad driver
- cyttsp_init:Cypress TrueTouch(R) Standard Product
- cyttsp_init:I2C Touchscreen Driver (Built Oct 24 2011 @ 21:37:12)
- cyttsp:Reseting TMA340
- cyttsp:Start Probe 1.2
- hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0000
- cyttsp::found BL, Overriding maxx & maxy
- cyttsp_initialize:cyttsp-i2c: Register input device
- input: cyttsp-i2c as /devices/platform/i2c_omap.2/i2c-2/2-0022/input/input2
- cyttsp_initialize:Setting up interrupt 259
- cyttsp_initialize:cyttsp_initialize: Create sysfs_group successfully!
- cyttsp:Start Probe PASS
- max8903_charger_enable: dtct_status 0x04
- ft5x06_init() - FT I2C Touchscreen Driver (Built Oct 24 2011 @ 21:37:13)
- can't get ft5x06 xreset GPIO
- android_usb gadget: high speed config #1: android
- cyttsp_power_on:BL101: f=00 s=11 err=D0 bl=010B bld=010B R=16
- musb_hdrc periph: enabled ep1in for bulk IN, dma, maxpacket 512
- cyttsp_power_on:BL102: tver=1100 a_id=AA1D aver=0006
- musb_hdrc periph: enabled ep1out for bulk OUT, dma, maxpacket 512
- cyttsp_power_on:BL103: c_id=C0C1C2
- kxtf9 1-000f: WHO_AM_I = 0x01
- input: kxtf9_accel as /devices/virtual/input/input3
- using rtc device, twl_rtc, for alarms
- twl_rtc twl_rtc: rtc core: registered twl_rtc as rtc0
- i2c /dev entries driver
- Linux video capture interface: v2.00
- omap-previewer omap-previewer: omap-previewer: Registered preview wrapper
- omap3isp omap3isp: Revision 15.0 found
- omap-iommu omap-iommu.0: isp: version 1.1
- Saving csi2 context
- Restoring csi2 context
- Saving csi2 context
- usbcore: registered new interface driver uvcvideo
- USB Video Class driver (v0.1.0)
- max17042: max17042_init ...
- max17042: max17042_probe ...
- max17042: next history save at 4294845705
- max17042: max17042_probe > IRQ is 260
- max17042 GPIO pin read 1
- max17042: max17042_device_power_on ...
- max17042: max17042_hw_init ...
- max17042: BATTERY Detected!
- config = 0x2214
- Valert = 0xff9b
- Salert = 0xff05
- config = 0x2214
- config = 0x2214
- shdntimer = 0x0002
- max17042: max17042_verify ...
- max17042 1-0036: Version = 0x0092
- max17042 1-0036: support ver. 1.0.0 enabled
- MAXIM 8903 Charger registering!
- MAXIM 8903 Charger Initializing...
- MAXIM8903: Request CHARGER FLT IRQ successfully!
- max8903_charger_enable: USB CHARGER(500mA) Detected!
- MAX8903: Charging is now enabled!
- OMAP Watchdog Timer Rev 0x31: initial timeout 60 sec
- device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
- Bluetooth: Bluetooth Driver for TI WiLink - Version 1.0
- [imoseyon] interactive enter
- cpuidle: using governor ladder
- cpuidle: using governor menu
- MMC LOG:mmc_log_init() - MMC Logging ENABLED.
- omap_pwm_led omap_pwm_led: OMAP PWM LED (lcd-backlight) at GP timer 8/0
- Registered led device: lcd-backlight
- cyttsp_power_on:SI102: tver=1100 a_id=AA1D aver=0006
- cyttsp_power_on:SI103: c_id=C0C1C2
- usbcore: registered new interface driver usbhid
- usbhid: v2.6:USB HID core driver
- logger: created 64K log 'log_main'
- logger: created 256K log 'log_events'
- logger: created 64K log 'log_radio'
- logger: created 64K log 'log_system'
- Advanced Linux Sound Architecture Driver Version 1.0.21.
- usbcore: registered new interface driver snd-usb-audio
- mmc0: new high speed MMC card at address 0001
- mmcblk0: mmc0:0001 SEM08G 7.39 GiB
- ##+tlv320dac3100_init
- mmcblk0: p1 p2 p3 p4 < p5 p6 p7 p8 >
- IRQ 317/dac3100: IRQF_DISABLED is not guaranteed on shared IRQs
- ##-tlv320dac3100_init
- No device for DAI TLV320dac3100
- No device for DAI omap-mcbsp-dai-0
- No device for DAI omap-mcbsp-dai-1
- No device for DAI omap-mcbsp-dai-2
- No device for DAI omap-mcbsp-dai-3
- No device for DAI omap-mcbsp-dai-4
- No device for DAI null
- asoc: TLV320dac3100 <-> omap-mcbsp-dai-0 mapping ok
- asoc: TLV320dac3100 <-> omap-mcbsp-dai-1 mapping ok
- asoc: null <-> omap-mcbsp-dai-1 mapping ok
- asoc: null <-> omap-mcbsp-dai-2 mapping ok
- mmc1: host does not support reading read-only switch. assuming write-enable.
- mmc1: new high speed SDHC card at address b368
- mmcblk1: mmc1:b368 USD 7.46 GiB
- mmcblk1: p1
- ALSA device list:
- #0: OMAP3 EDP (dac3100)
- oprofile: using timer
- Netfilter messages via NETLINK v0.30.
- nf_conntrack version 0.5.0 (7686 buckets, 30744 max)
- CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
- nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
- sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
- ctnetlink v0.93: registering with nfnetlink.
- NF_TPROXY: Transparent proxy support initialized, version 4.1.0
- NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
- xt_time: kernel timezone is -0000
- ip_tables: (C) 2000-2006 Netfilter Core Team
- arp_tables: (C) 2002 David S. Miller
- TCP cubic registered
- Initializing XFRM netlink socket
- NET: Registered protocol family 17
- NET: Registered protocol family 15
- Bluetooth: L2CAP ver 2.14
- Bluetooth: L2CAP socket layer initialized
- Bluetooth: SCO (Voice Link) ver 0.6
- Bluetooth: SCO socket layer initialized
- Bluetooth: RFCOMM TTY layer initialized
- Bluetooth: RFCOMM socket layer initialized
- Bluetooth: RFCOMM ver 1.11
- Bluetooth: BNEP (Ethernet Emulation) ver 1.3
- Bluetooth: BNEP filters: protocol multicast
- Bluetooth: HIDP (Human Interface Emulation) ver 1.2
- Power Management for TI OMAP3.
- <6>SR: Nvalues not fused for1.2G, disabled
- SR1:Fused Nvalues for VDD1OPP3 11191994
- SR1:Fused Nvalues for VDD1OPP2 10126330
- SR1:Fused Nvalues for VDD1OPP1 10078660
- sr1_opp_margin[1]=37500
- sr1_opp_margin[2]=37500
- sr1_opp_margin[3]=37500
- sr1_opp_margin[4]=62500
- sr1_opp_margin[5]=62500
- steps added, volt will berecaliberated automatically
- SR2:Fused Nvalues for VDD2OPP1 10085085
- SmartReflex driver initialized
- Disabling unused clock "uart3_ick"
- Disabling unused clock "gpio2_dbck"
- Disabling unused clock "gpio3_dbck"
- Disabling unused clock "gpio4_dbck"
- Disabling unused clock "gpio6_dbck"
- Disabling unused clock "uart3_fck"
- Disabling unused clock "sad2d_ick"
- Disabling unused clock "dpll4_m6x2_ck"
- Disabling unused clock "dpll4_m5x2_ck"
- Disabling unused clock "dpll3_m3x2_ck"
- Disabling unused clock "sys_clkout1"
- VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
- rotation = 0, var->rotate = 0
- OMAP DISPCONTROL read (stallmode)0
- OMAP DISPCONTROL read (gpout)1
- OMAP DISPCONTROL read (stallmode)1
- omapdss DSS error: Requested pixel clock not possible with the current OMAP2_DSS_MIN_FCK_PER_PCK setting. Turning the constraint off.
- omapdss DPI: Could not find exact pixel clock. Requested 68000 kHz, got 66461 kHz
- pvr: Initializing 3rd party display driver
- pvr: Found 1 framebuffers
- pvr: -> Populating display device 0
- pvr: Flipping support
- pvr: Buffers available: 3 (2457600 bytes per buffer)
- twl_rtc twl_rtc: setting system clock to 2011-12-03 17:33:39 UTC (1322933619)
- Restoring csi2 context
- omap3 omap3isp CSI memvs initted
- Saving csi2 context
- omap_vout: registered and initialized video device 2 [v4l2]
- omap_vout: registered and initialized video device 3 [v4l2]
- Freeing init memory: 180K
- usb usb1: uevent
- usb 1-0:1.0: uevent
- init: cannot open '/initlogo.rle'
- EXT4-fs (mmcblk0p5): mounted filesystem without journal
- EXT4-fs (mmcblk0p6): mounted filesystem with ordered data mode
- EXT4-fs (mmcblk0p7): mounted filesystem with ordered data mode
- init: cannot execve('/system/bin/pvrsrvinit'): Permission denied
- init: cannot find '/system/etc/install-recovery.sh', disabling 'flash_recovery'
- init: cannot find '/system/bin/uim-sysfs', disabling 'uim'
- SR1.5 is enabled by default instead of class3
- SR1.5 is enabled by default instead of class3
- enabling adb
- proc_load: Processor Loaded /system/lib/dsp/baseimage.dof
- omap mailbox rev 4.0
- proc_start: dsp in running state
- procwrap_detach: deprecated dspbridge ioctl
- hub 1-0:1.0: hub_suspend
- usb usb1: bus auto-suspend
- warning: `rild' uses 32-bit capabilities (legacy support in use)
- adb_open
- android_usb gadget: high speed config #1: android
- musb_hdrc periph: enabled ep2in for bulk IN, dma, maxpacket 512
- musb_hdrc periph: enabled ep2out for bulk OUT, dma, maxpacket 512
- musb_hdrc periph: enabled ep1in for bulk IN, dma, maxpacket 512
- musb_hdrc periph: enabled ep1out for bulk OUT, dma, maxpacket 512
- init: untracked pid 1027 exited
- init: untracked pid 1115 exited
- init: untracked pid 1127 exited
- init: untracked pid 1121 exited
- init: untracked pid 1131 exited
- init: untracked pid 1133 exited
- init: untracked pid 1137 exited
- init: untracked pid 1143 exited
- init: untracked pid 1139 exited
- init: untracked pid 1147 exited
- init: untracked pid 1149 exited
- init: untracked pid 1153 exited
- init: untracked pid 1163 exited
- init: untracked pid 1170 exited
- init: untracked pid 1177 exited
- init: untracked pid 1191 exited
- init: untracked pid 1198 exited
- init: untracked pid 1205 exited
- init: untracked pid 1213 exited
- init: untracked pid 1220 exited
- init: untracked pid 1227 exited
- init: untracked pid 1234 exited
- init: untracked pid 1241 exited
- init: untracked pid 1248 exited
- init: untracked pid 1256 exited
- init: untracked pid 1263 exited
- init: untracked pid 1270 exited
- init: untracked pid 1277 exited
- init: untracked pid 1284 exited
- init: untracked pid 1291 exited
- init: untracked pid 1299 exited
- init: untracked pid 1306 exited
- init: untracked pid 1313 exited
- init: untracked pid 1320 exited
- init: untracked pid 1327 exited
- init: untracked pid 1334 exited
- init: untracked pid 1342 exited
- init: untracked pid 1349 exited
- init: untracked pid 1356 exited
- init: untracked pid 1363 exited
- init: untracked pid 1370 exited
- init: untracked pid 1377 exited
- init: untracked pid 1385 exited
- init: untracked pid 1392 exited
- init: untracked pid 1399 exited
- init: untracked pid 1406 exited
- init: untracked pid 1413 exited
- init: untracked pid 1420 exited
- init: untracked pid 1428 exited
- init: untracked pid 1435 exited
- init: untracked pid 1442 exited
- init: untracked pid 1449 exited
- init: untracked pid 1456 exited
- init: untracked pid 1463 exited
- init: untracked pid 1471 exited
- SysRq : Emergency Remount R/O
- Emergency Remount complete
- OPP5 doesn't support SmartReflex
- max17042: max17042_disable ...
- Restarting system.
- No errors detected
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement