316350: 28.02.2015 00:44:17.550 +0.0
 F1 A5	Restart
316356: 28.02.2015 00:44:17.649 +0.0
 B0	Request Firmware ver
316362: 28.02.2015 00:44:17.749 +0.0
 E1 99	Switch to CAN mode
316368: 28.02.2015 00:44:17.849 +0.0
 94 01 12 17 08	Command Acknowledged???
316374: 28.02.2015 00:44:17.949 +0.0
 52 63 01	Master timer setting, 98.30 mS (default)
316380: 28.02.2015 00:44:18.049 +0.0
 73 0A 00 02	Set baud rate, CAN Channel 0, 500 kbps
316386: 28.02.2015 00:44:18.149 +0.0
 73 2B 00 04	Set ID/Mask Mode for CAN Channel 0, Four 16-bit IDs and Masks
316392: 28.02.2015 00:44:18.249 +0.0
 75 2A 00 00 07 E8	Set acceptance ID, 0 IDE 11 Bit ID, 0 Normal Frame RTR, Channel 0, Acceptance ID number 0, 07 E8 acceptance ID when ID/Mask mode = 4
316398: 28.02.2015 00:44:18.349 +0.0
 75 2A 00 01 01 01	Set acceptance ID, 0 IDE 11 Bit ID, 0 Normal Frame RTR, Channel 0, Acceptance ID number 1, 01 01 acceptance ID when ID/Mask mode = 4
316404: 28.02.2015 00:44:18.449 +0.0
 75 2A 00 02 07 DF	Set acceptance ID, 0 IDE 11 Bit ID, 0 Normal Frame RTR, Channel 2, Acceptance ID number 1, 07 DF acceptance ID when ID/Mask mode = 4
316410: 28.02.2015 00:44:18.549 +0.0
 74 0F 00 07 E0	Set outbound flow control ID, 11 bit ID, channel 0, 07 E0 11 bit ID
316416: 28.02.2015 00:44:18.649 +0.0
 75 2C 00 00 02 00	Set mask, RTR and IDE bit must match, CH 0, mask #0, mask value = 02 00 when ID/Mask mode = 4
316422: 28.02.2015 00:44:18.749 +0.0
 75 2C 00 01 00 00	Set mask, RTR and IDE bit must match, CH 0, mask #1, mask value = 02 00 when ID/Mask mode = 4
316428: 28.02.2015 00:44:18.849 +0.0
 75 2C 00 02 00 00	Set mask, RTR and IDE bit must match, CH 0, mask #2, mask value = 02 00 when ID/Mask mode = 4
316434: 28.02.2015 00:44:18.949 +0.0
 73 0E 00 01	Set outbound flow control separation time, CH0, 1 mS, refer to ISO15765
316440: 28.02.2015 00:44:19.049 +0.0
 73 30 00 00	AE byte CH0, disable
316446: 28.02.2015 00:44:19.149 +0.0
 74 27 00 01 AA	Outbound message padding, CH0, enabled, AA pad byte
316452: 28.02.2015 00:44:19.249 +0.0
 73 26 00 01	ISO 15765 ops, CH0, mode1
316458: 28.02.2015 00:44:19.349 +0.0
 73 11 00 01	Set operational mode for CH0, enabled for normal ops
316464: 28.02.2015 00:44:19.449 +0.0
 74 1B 00 01 0A	Periodic message interval count command, CH 0, Message 01, 0A interval count
316470: 28.02.2015 00:44:19.549 +0.0
 74 1B 00 02 0F	Periodic message interval count command, CH 0, Message 02, 0F interval count
316476: 28.02.2015 00:44:19.649 +0.0
 78 18 02 00 01 01 FE 01 3E	Periodic message setup command, message 02, 11 bit ID, normal frame, CH0, 01 01 FE 11-bit ID right justified, 01 3E data field
316482: 28.02.2015 00:44:19.749 +0.0
 74 0C 00 01 01	Periodic message group operational control command, CH 0, Group 1, Type 1 enabled
316488: 28.02.2015 00:44:19.849 +0.0
 52 40 00	Do not send transmit acks to host, all channels
316494: 28.02.2015 00:44:19.949 +0.0
 51 60	Reserved ???
316500: 28.02.2015 00:44:20.049 +0.0
 55 60 09 DC 6A 0F	Reserved ???
316506: 28.02.2015 00:44:20.149 +0.0
 54 61 00 80 04	Read User Space ???
316512: 28.02.2015 00:44:20.249 +0.0
 54 61 00 84 04	Read User Space ???
316518: 28.02.2015 00:44:20.349 +0.0
 54 61 00 88 04	Read User Space ???
316524: 28.02.2015 00:44:20.449 +0.0
 54 61 00 8C 04	Read User Space ???
316530: 28.02.2015 00:44:20.550 +0.001
 52 60 00	Reserved ???
316536: 28.02.2015 00:44:20.649 +0.0
 75 2A 00 00 07 E8	Set acceptance ID, 0 IDE 11 Bit ID, 0 Normal Frame RTR, Channel 0, Acceptance ID number 0, 07 E8 acceptance ID when ID/Mask mode = 4
316542: 28.02.2015 00:44:20.750 +0.0
 74 0F 00 07 E0	Set outbound flow control ID, 11 bit ID, channel 0, 07 E0 11 bit ID
316548: 28.02.2015 00:44:20.850 +0.0
 04 00 07 E0 A2	11 Bit ID, Normal Frame RTR, Transmit message as-is, 07 E0 ID, A2 data
316554: 28.02.2015 00:44:20.951 +0.0
 05 00 07 E0 1A 90
316560: 28.02.2015 00:44:21.051 +0.0
 05 00 07 E0 1A B4
316564: 28.02.2015 00:44:21.151 +0.050
 05 00 07 E0 1A C1
316570: 28.02.2015 00:44:21.251 +0.050
 05 00 07 E0 1A CB
316576: 28.02.2015 00:44:21.354 +0.050
 05 00 07 E0 09 06
316584: 28.02.2015 00:44:21.458 +0.0
 05 00 07 E0 1A 29