Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- root@OpenWrt:~# dmesg
- [ 0.000000] Booting Linux on physical CPU 0x0
- [ 0.000000] Linux version 4.4.14 (sfx@jaguar-lin) (gcc version 5.3.0 (OpenWrt GCC 5.3.0 50013) ) #4 SMP Sat Nov 26 21:24:20 UTC 2016
- [ 0.000000] CPU: ARMv7 Processor [410fd034] revision 4 (ARMv7), cr=10c5383d
- [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
- [ 0.000000] Machine model: Raspberry Pi 3 Model B Rev 1.2
- [ 0.000000] cma: Reserved 16 MiB at 0x3a000000
- [ 0.000000] Memory policy: Data cache writealloc
- [ 0.000000] On node 0 totalpages: 241664
- [ 0.000000] free_area_init_node: node 0, pgdat 80582ec0, node_mem_map b988e000
- [ 0.000000] Normal zone: 1888 pages used for memmap
- [ 0.000000] Normal zone: 0 pages reserved
- [ 0.000000] Normal zone: 241664 pages, LIFO batch:31
- [ 0.000000] [bcm2709_smp_init_cpus] enter (9480->f3003010)
- [ 0.000000] [bcm2709_smp_init_cpus] ncores=4
- [ 0.000000] PERCPU: Embedded 12 pages/cpu @b984e000 s17984 r8192 d22976 u49152
- [ 0.000000] pcpu-alloc: s17984 r8192 d22976 u49152 alloc=12*4096
- [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
- [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 239776
- [ 0.000000] Kernel command line: 8250.nr_uarts=1 dma.dmachans=0x7f35 bcm2708_fb.fbwidth=1440 bcm2708_fb.fbheight=900 bcm2709.boardrev=0xa22082 bcm2709.serial=0xace8b55f smsc95xx.macaddr=B8:27:EB:E8:B5:5F bcm2708_fb.fbswap=1 bcm2709.uart_clock=48000000 vc_mem.mem_base=0x3dc00000 vc_mem.mem_size=0x3f000000 dwc_otg.lpm_enable=0 console=ttyS0,115200 kgdboc=ttyS0,115200 console=tty1 root=/dev/mmcblk0p2 rootfstype=ext4 rootwait
- [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
- [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
- [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
- [ 0.000000] Memory: 935496K/966656K available (3951K kernel code, 126K rwdata, 1416K rodata, 220K init, 368K bss, 14776K reserved, 16384K cma-reserved)
- [ 0.000000] Virtual kernel memory layout:
- [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
- [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
- [ 0.000000] vmalloc : 0xbb800000 - 0xff800000 (1088 MB)
- [ 0.000000] lowmem : 0x80000000 - 0xbb000000 ( 944 MB)
- [ 0.000000] modules : 0x7f000000 - 0x80000000 ( 16 MB)
- [ 0.000000] .text : 0x80008000 - 0x80546058 (5369 kB)
- [ 0.000000] .init : 0x80547000 - 0x8057e000 ( 220 kB)
- [ 0.000000] .data : 0x8057e000 - 0x8059daac ( 127 kB)
- [ 0.000000] .bss : 0x8059daac - 0x805f9bac ( 369 kB)
- [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
- [ 0.000000] Hierarchical RCU implementation.
- [ 0.000000] NR_IRQS:16 nr_irqs:16 16
- [ 0.000000] Architected cp15 timer(s) running at 19.20MHz (phys).
- [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
- [ 0.000009] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
- [ 0.000025] Switching to timer-based delay loop, resolution 52ns
- [ 0.000203] Console: colour dummy device 80x30
- [ 0.000843] console [tty1] enabled
- [ 0.000885] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
- [ 0.000938] pid_max: default: 32768 minimum: 301
- [ 0.001068] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
- [ 0.001100] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
- [ 0.001783] CPU: Testing write buffer coherency: ok
- [ 0.002219] CPU0: update cpu_capacity 1024
- [ 0.002248] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
- [ 0.002276] [bcm2709_smp_prepare_cpus] enter
- [ 0.002385] Setting up static identity map for 0x8240 - 0x8298
- [ 0.003571] [bcm2709_boot_secondary] cpu:1 started (0) 16
- [ 0.003869] [bcm2709_secondary_init] enter cpu:1
- [ 0.003900] CPU1: update cpu_capacity 1024
- [ 0.003906] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
- [ 0.004207] [bcm2709_boot_secondary] cpu:2 started (0) 17
- [ 0.004411] [bcm2709_secondary_init] enter cpu:2
- [ 0.004430] CPU2: update cpu_capacity 1024
- [ 0.004436] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
- [ 0.004718] [bcm2709_boot_secondary] cpu:3 started (0) 16
- [ 0.004900] [bcm2709_secondary_init] enter cpu:3
- [ 0.004918] CPU3: update cpu_capacity 1024
- [ 0.004924] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
- [ 0.004975] Brought up 4 CPUs
- [ 0.005066] SMP: Total of 4 processors activated (153.60 BogoMIPS).
- [ 0.005092] CPU: All CPU(s) started in HYP mode.
- [ 0.005116] CPU: Virtualization extensions available.
- [ 0.013423] VFP support v0.3: implementor 41 architecture 3 part 40 variant 3 rev 4
- [ 0.013729] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
- [ 0.014406] pinctrl core: initialized pinctrl subsystem
- [ 0.014889] NET: Registered protocol family 16
- [ 0.019947] DMA: preallocated 4096 KiB pool for atomic coherent allocations
- [ 0.049927] cpuidle: using governor ladder
- [ 0.079946] cpuidle: using governor menu
- [ 0.085819] bcm2709: Mini UART enabled
- [ 0.085929] Serial: AMBA PL011 UART driver
- [ 0.086071] uart-pl011 3f201000.uart: could not find pctldev for node /soc/gpio@7e200000/uart0_pins, deferring probe
- [ 0.086253] bcm2835-mbox 3f00b880.mailbox: mailbox enabled
- [ 0.140852] bcm2835-dma 3f007000.dma: DMA legacy API manager at f3007000, dmachans=0x1
- [ 0.142226] SCSI subsystem initialized
- [ 0.142410] usbcore: registered new interface driver usbfs
- [ 0.142506] usbcore: registered new interface driver hub
- [ 0.142589] usbcore: registered new device driver usb
- [ 0.150027] raspberrypi-firmware soc:firmware: Attached to firmware from 2016-06-02 16:01
- [ 0.177019] clocksource: Switched to clocksource arch_sys_counter
- [ 0.184724] NET: Registered protocol family 2
- [ 0.185282] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
- [ 0.185415] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
- [ 0.185622] TCP: Hash tables configured (established 8192 bind 8192)
- [ 0.185726] UDP hash table entries: 512 (order: 2, 16384 bytes)
- [ 0.185790] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
- [ 0.185996] NET: Registered protocol family 1
- [ 0.187693] futex hash table entries: 1024 (order: 4, 65536 bytes)
- [ 0.196218] io scheduler noop registered
- [ 0.196257] io scheduler deadline registered
- [ 0.196312] io scheduler cfq registered (default)
- [ 0.198747] BCM2708FB: allocated DMA memory fa400000
- [ 0.198793] BCM2708FB: allocated DMA channel 0 @ f3007000
- [ 0.217149] Console: switching to colour frame buffer device 180x56
- [ 0.227746] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
- [ 0.228642] console [ttyS0] disabled
- [ 0.228736] 3f215040.uart: ttyS0 at MMIO 0x3f215040 (irq = 59, base_baud = 31250000) is a 16550
- [ 0.822059] console [ttyS0] enabled
- [ 0.826260] vc-cma: Videocore CMA driver
- [ 0.830316] vc-cma: vc_cma_base = 0x00000000
- [ 0.835151] vc-cma: vc_cma_size = 0x00000000 (0 MiB)
- [ 0.840712] vc-cma: vc_cma_initial = 0x00000000 (0 MiB)
- [ 0.846402] vc-mem: phys_addr:0x00000000 mem_base=0x3dc00000 mem_size:0x3f000000(1008 MiB)
- [ 0.865938] brd: module loaded
- [ 0.875898] loop: module loaded
- [ 0.879998] vchiq: vchiq_init_state: slot_zero = 0xba480000, is_master = 0
- [ 0.888697] usbcore: registered new interface driver smsc95xx
- [ 0.894647] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
- [ 1.100796] Core Release: 2.80a
- [ 1.104031] Setting default values for core params
- [ 1.108992] Finished setting default values for core params
- [ 1.315023] Using Buffer DMA mode
- [ 1.318444] Periodic Transfer Interrupt Enhancement - disabled
- [ 1.324436] Multiprocessor Interrupt Enhancement - disabled
- [ 1.330175] OTG VER PARAM: 0, OTG VER FLAG: 0
- [ 1.337774] Dedicated Tx FIFOs mode
- [ 1.344709] WARN::dwc_otg_hcd_init:1047: FIQ DMA bounce buffers: virt = 0xba414000 dma = 0xfa414000 len=9024
- [ 1.358027] FIQ FSM acceleration enabled for :
- [ 1.358027] Non-periodic Split Transactions
- [ 1.358027] Periodic Split Transactions
- [ 1.358027] High-Speed Isochronous Endpoints
- [ 1.358027] Interrupt/Control Split Transaction hack enabled
- [ 1.396869] dwc_otg: Microframe scheduler enabled
- [ 1.396918] WARN::hcd_init_fiq:413: FIQ on core 1 at 0x80299718
- [ 1.406118] WARN::hcd_init_fiq:414: FIQ ASM at 0x8000ee78 length 36
- [ 1.415655] WARN::hcd_init_fiq:439: MPHI regs_base at 0xbb87e000
- [ 1.424960] dwc_otg 3f980000.usb: DWC OTG Controller
- [ 1.433245] dwc_otg 3f980000.usb: new USB bus registered, assigned bus number 1
- [ 1.443951] dwc_otg 3f980000.usb: irq 62, io mem 0x00000000
- [ 1.452866] Init: Port Power? op_state=1
- [ 1.460021] Init: Power Port (0)
- [ 1.466593] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
- [ 1.476668] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 1.487171] usb usb1: Product: DWC OTG Controller
- [ 1.495064] usb usb1: Manufacturer: Linux 4.4.14 dwc_otg_hcd
- [ 1.503939] usb usb1: SerialNumber: 3f980000.usb
- [ 1.512310] hub 1-0:1.0: USB hub found
- [ 1.519225] hub 1-0:1.0: 1 port detected
- [ 1.526748] dwc_otg: FIQ enabled
- [ 1.526756] dwc_otg: NAK holdoff enabled
- [ 1.526764] dwc_otg: FIQ split-transaction FSM enabled
- [ 1.526800] Module dwc_common_port init
- [ 1.526972] usbcore: registered new interface driver uas
- [ 1.535521] usbcore: registered new interface driver usb-storage
- [ 1.544766] mousedev: PS/2 mouse device common for all mice
- [ 1.554193] bcm2835-wdt 3f100000.watchdog: Broadcom BCM2835 watchdog timer
- [ 1.564404] sdhci: Secure Digital Host Controller Interface driver
- [ 1.573799] sdhci: Copyright(c) Pierre Ossman
- [ 1.581600] sdhost: log_buf @ ba413000 (fa413000)
- [ 1.667041] mmc0: sdhost-bcm2835 loaded - DMA enabled (>1)
- [ 1.677916] mmc-bcm2835 3f300000.mmc: mmc_debug:0 mmc_debug2:0
- [ 1.686923] mmc-bcm2835 3f300000.mmc: DMA channel allocated
- [ 1.717175] Indeed it is in host mode hprt0 = 00021501
- [ 1.727114] sdhci-pltfm: SDHCI platform and OF driver helper
- [ 1.737553] NET: Registered protocol family 10
- [ 1.745916] NET: Registered protocol family 17
- [ 1.753506] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
- [ 1.769550] 8021q: 802.1Q VLAN Support v1.8
- [ 1.777475] Registering SWP/SWPB emulation handler
- [ 1.786196] vc-sm: Videocore shared memory driver
- [ 1.794179] [vc_sm_connected_init]: start
- [ 1.801418] mmc0: host does not support reading read-only switch, assuming write-enable
- [ 1.813178] [vc_sm_connected_init]: end - returning 0
- [ 1.821687] mmc0: new high speed SDHC card at address aaaa
- [ 1.831931] 3f201000.uart: ttyAMA0 at MMIO 0x3f201000 (irq = 87, base_baud = 0) is a PL011 rev2
- [ 1.844429] of_cfs_init
- [ 1.844506] mmcblk0: mmc0:aaaa SP32G 29.7 GiB
- [ 1.857976] of_cfs_init: OK
- [ 1.857979] mmcblk0: p1 p2
- [ 1.878190] EXT4-fs (mmcblk0p2): mounted filesystem without journal. Opts: (null)
- [ 1.889184] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
- [ 1.899762] Freeing unused kernel memory: 220K (80547000 - 8057e000)
- [ 1.907052] usb 1-1: new high-speed USB device number 2 using dwc_otg
- [ 1.909542] Indeed it is in host mode hprt0 = 00001101
- [ 1.933737] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
- [ 1.944115] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
- [ 1.954455] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
- [ 1.965978] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
- [ 2.021093] init: Console is alive
- [ 2.027914] init: - watchdog -
- [ 2.076960] mmc1: new high speed SDIO card at address 0001
- [ 2.117280] usb 1-1: New USB device found, idVendor=0424, idProduct=9514
- [ 2.127344] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
- [ 2.138444] hub 1-1:1.0: USB hub found
- [ 2.145491] hub 1-1:1.0: 5 ports detected
- [ 2.155651] init: - preinit -
- [ 2.427049] usb 1-1.1: new high-speed USB device number 3 using dwc_otg
- [ 2.537247] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00
- [ 2.547417] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
- [ 2.560752] smsc95xx v1.0.4
- [ 2.560936] random: procd urandom read with 61 bits of entropy available
- [ 2.639942] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:e8:b5:5f
- [ 2.747040] usb 1-1.2: new low-speed USB device number 4 using dwc_otg
- [ 2.861327] usb 1-1.2: New USB device found, idVendor=04b3, idProduct=310c
- [ 2.871717] usb 1-1.2: New USB device strings: Mfr=0, Product=2, SerialNumber=0
- [ 2.882523] usb 1-1.2: Product: USB Optical Mouse
- [ 2.967034] usb 1-1.3: new full-speed USB device number 5 using dwc_otg
- [ 3.078981] usb 1-1.3: New USB device found, idVendor=0557, idProduct=7000
- [ 3.089381] usb 1-1.3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
- [ 3.101066] hub 1-1.3:1.0: USB hub found
- [ 3.108980] hub 1-1.3:1.0: 4 ports detected
- [ 3.397046] usb 1-1.3.1: new low-speed USB device number 6 using dwc_otg
- [ 3.570796] usb 1-1.3.1: New USB device found, idVendor=413c, idProduct=2111
- [ 3.581376] usb 1-1.3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
- [ 3.592431] usb 1-1.3.1: Product: Dell USB Wired Entry Keyboard
- [ 3.601811] usb 1-1.3.1: Manufacturer: DELL
- [ 4.283954] mount_root: mounting /dev/root
- [ 4.294484] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
- [ 4.346770] procd: - early -
- [ 4.353138] procd: - watchdog -
- [ 4.962774] procd: - ubus -
- [ 5.022507] procd: - init -
- [ 5.380431] ip6_tables: (C) 2000-2006 Netfilter Core Team
- [ 5.398455] hidraw: raw HID events driver (C) Jiri Kosina
- [ 5.422108] Loading modules backported from Linux version wt-2016-05-12-0-g7a54796
- [ 5.433004] Backport generated by backports.git backports-20160216-0-ge3c56e4
- [ 5.445185] ip_tables: (C) 2000-2006 Netfilter Core Team
- [ 5.458436] nf_conntrack version 0.5.0 (14876 buckets, 59504 max)
- [ 5.573689] input: USB Optical Mouse as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.2/1-1.2:1.0/0003:04B3:310C.0001/input/input0
- [ 5.589540] hid-generic 0003:04B3:310C.0001: input,hidraw0: USB HID v1.11 Mouse [USB Optical Mouse] on usb-3f980000.usb-1.2/input0
- [ 5.631372] input: DELL Dell USB Wired Entry Keyboard as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.3/1-1.3.1/1-1.3.1:1.0/0003:413C:2111.0002/input/input1
- [ 5.707357] hid-generic 0003:413C:2111.0002: input,hidraw1: USB HID v1.10 Keyboard [DELL Dell USB Wired Entry Keyboard] on usb-3f980000.usb-1.3.1/input0
- [ 5.777547] input: DELL Dell USB Wired Entry Keyboard as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.3/1-1.3.1/1-1.3.1:1.1/0003:413C:2111.0003/input/input2
- [ 5.847326] hid-generic 0003:413C:2111.0003: input,hidraw2: USB HID v1.10 Device [DELL Dell USB Wired Entry Keyboard] on usb-3f980000.usb-1.3.1/input1
- [ 5.864988] usbcore: registered new interface driver usbhid
- [ 5.874536] usbhid: USB HID core driver
- [ 5.888623] xt_time: kernel timezone is -0000
- [ 5.912565] PPP generic driver version 2.4.2
- [ 5.921810] NET: Registered protocol family 24
- [ 6.028243] random: nonblocking pool is initialized
- [ 6.047343] brcmfmac: brcmf_c_preinit_dcmds: Firmware version = wl0: Dec 15 2015 18:10:45 version 7.45.41.23 (r606571) FWID 01-cc4eda9c
- [ 6.083897] brcmfmac: brcmf_cfg80211_reg_notifier: not a ISO3166 code (0x30 0x30)
- [ 6.099573] usbcore: registered new interface driver brcmfmac
- [ 8.588790] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup
- [ 8.602043] device eth0 entered promiscuous mode
- [ 8.612893] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
- [ 134.737160] smsc95xx 1-1.1:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0xC5E1
- [ 134.751542] br-lan: port 1(eth0) entered forwarding state
- [ 134.760848] br-lan: port 1(eth0) entered forwarding state
- [ 134.770312] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
- [ 136.757022] br-lan: port 1(eth0) entered forwarding state
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement