API tools faq
paste
Advertisement
Guest User

Untitled

a guest
Sep 11th, 2011
334
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 15.49 KB | None | 0 0
raw download clone embed print report
  1.  
  2. Nokia-N900:~# dmesg
  3. ed 8192 bind 8192)
  4. [ 1.415313] TCP reno registered
  5. [ 1.437866] NET: Registered protocol family 1
  6. [ 1.458801] VFS: Disk quotas dquot_6.5.1
  7. [ 1.458953] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  8. [ 1.460449] msgmni has been set to 479
  9. [ 1.461029] lowmem: Module initialized.
  10. [ 1.469512] alg: No test for lzo999 (lzo999-generic)
  11. [ 1.469726] alg: No test for stdrng (krng)
  12. [ 1.469848] io scheduler noop registered
  13. [ 1.470275] io scheduler cfq registered (default)
  14. [ 1.470672] OMAP DSS rev 2.0
  15. [ 1.470794] OMAP DISPC rev 3.0
  16. [ 1.470855] OMAP VENC rev 2
  17. [ 1.478759] OMAP3 ROM RNG: initializing
  18. [ 1.480957] Serial: 8250/16550 driver4 ports, IRQ sharing disabled
  19. [ 1.487640] brd: module loaded
  20. [ 1.489990] loop: module loaded
  21. [ 1.490081] i2c /dev entries driver
  22. [ 1.491241] input: triton2-pwrbutton as /class/input/input0
  23. [ 1.515869] triton2 power button driver initialized
  24. [ 1.516479] OneNAND driver initializing
  25. [ 1.517700] omap2-onenand omap2-onenand: initializing on CS0, phys base 0x04000000, virtual base d0880000
  26. [ 1.517791] OneNAND Manufacturer: Samsung (0xec)
  27. [ 1.517822] Muxed OneNAND 256MB 1.8V 16-bit (0x40)
  28. [ 1.517852] OneNAND version = 0x0121
  29. [ 1.517883] Chip support all block unlock
  30. [ 1.517883] Chip has 2 plane
  31. [ 1.519500] Scanning device for bad blocks
  32. [ 1.634124] Creating 6 MTD partitions on "omap2-onenand":
  33. [ 1.634155] 0x00000000-0x00020000 : "bootloader"
  34. [ 1.634552] 0x00020000-0x00080000 : "config"
  35. [ 1.634796] 0x00080000-0x000c0000 : "log"
  36. [ 1.637237] mtdoops: Ready 10, 75 (no erase)
  37. [ 1.637268] mtdoops: Attached to MTD device 2
  38. [ 1.637298] 0x000c0000-0x002c0000 : "kernel"
  39. [ 1.637573] 0x002c0000-0x004c0000 : "initfs"
  40. [ 1.637847] 0x004c0000-0x10000000 : "rootfs"
  41. [ 1.639801] UBI: attaching mtd5 to ubi0
  42. [ 1.639831] UBI: physical eraseblock size: 131072 bytes (128 KiB)
  43. [ 1.639862] UBI: logical eraseblock size: 129024 bytes
  44. [ 1.639892] UBI: smallest flash I/O unit: 2048
  45. [ 1.639923] UBI: sub-page size: 512
  46. [ 1.639953] UBI: VID header offset: 512 (aligned 512)
  47. [ 1.640014] UBI: data offset: 2048
  48. [ 1.771453] UBI: attached mtd5 to ubi0
  49. [ 1.771514] UBI: MTD device name: "rootfs"
  50. [ 1.771545] UBI: MTD device size: 251 MiB
  51. [ 1.771575] UBI: number of good PEBs: 2010
  52. [ 1.771606] UBI: number of bad PEBs: 0
  53. [ 1.771636] UBI: max. allowed volumes: 128
  54. [ 1.771667] UBI: wear-leveling threshold: 4096
  55. [ 1.771697] UBI: number of internal volumes: 1
  56. [ 1.771728] UBI: number of user volumes: 1
  57. [ 1.771759] UBI: available PEBs: 0
  58. [ 1.771789] UBI: total number of reserved PEBs: 2010
  59. [ 1.771820] UBI: number of PEBs reserved for bad PEB handling: 20
  60. [ 1.771850] UBI: max/mean erase counter: 524/63
  61. [ 1.771881] UBI: image sequence number: 8
  62. [ 1.772369] usbcore: registered new interface driver libusual
  63. [ 1.772491] UBI: background thread "ubi_bgt0d" started, PID 26
  64. [ 1.789855] input: omap_twl4030keypad as /class/input/input1
  65. [ 1.838500] cpuidle: using governor ladder
  66. [ 1.838531] cpuidle: using governor menu
  67. [ 1.838745] Advanced Linux Sound Architecture Driver Version 1.0.18rc3.
  68. [ 1.838989] ASoC version 0.13.2
  69. [ 1.852508] AIC3X Audio Codec 0.2
  70. [ 1.855072] asoc: tlv320aic3x <-> omap-mcbsp-dai-0 mapping ok
  71. [ 1.856567] asoc: Bluetooth codec <-> omap-mcbsp-dai-1 mapping ok
  72. [ 1.908233] input: RX51 (tlv320aic3x) Jack as /class/input/input2
  73. [ 1.932525] ALSA device list:
  74. [ 1.932556] #0: RX51 (tlv320aic3x)
  75. [ 1.933074] TCP cubic registered
  76. [ 1.933105] NET: Registered protocol family 17
  77. [ 1.933197] NET: Registered protocol family 15
  78. [ 1.933258] Power Management for TI OMAP3.
  79. [ 1.936645] pm_dbg_init()
  80. [ 1.937408] SmartReflex driver initialized
  81. [ 1.943908] Disabling unused clock "gpt2_ick"
  82. [ 1.944000] Disabling unused clock "gpt3_ick"
  83. [ 1.944030] Disabling unused clock "gpt4_ick"
  84. [ 1.944061] Disabling unused clock "gpt5_ick"
  85. [ 1.944091] Disabling unused clock "gpt6_ick"
  86. [ 1.944122] Disabling unused clock "gpt7_ick"
  87. [ 1.944183] Disabling unused clock "gpt8_ick"
  88. [ 1.944213] Disabling unused clock "gpt9_ick"
  89. [ 1.944244] Disabling unused clock "uart3_ick"
  90. [ 1.944274] Disabling unused clock "gpio2_dbck"
  91. [ 1.944305] Disabling unused clock "gpio3_dbck"
  92. [ 1.944366] Disabling unused clock "gpio4_dbck"
  93. [ 1.944396] Disabling unused clock "gpio5_dbck"
  94. [ 1.944427] Disabling unused clock "gpio6_dbck"
  95. [ 1.944458] Disabling unused clock "gpt9_fck"
  96. [ 1.944488] Disabling unused clock "gpt8_fck"
  97. [ 1.944519] Disabling unused clock "gpt7_fck"
  98. [ 1.944549] Disabling unused clock "gpt6_fck"
  99. [ 1.944580] Disabling unused clock "gpt5_fck"
  100. [ 1.944641] Disabling unused clock "gpt4_fck"
  101. [ 1.944671] Disabling unused clock "gpt3_fck"
  102. [ 1.944702] Disabling unused clock "gpt2_fck"
  103. [ 1.944732] Disabling unused clock "uart3_fck"
  104. [ 1.944763] Disabling unused clock "wdt2_ick"
  105. [ 1.944824] Disabling unused clock "wdt2_fck"
  106. [ 1.944854] Disabling unused clock "gpio1_dbck"
  107. [ 1.944885] Disabling unused clock "rng_ick"
  108. [ 1.944915] Disabling unused clock "ssi_ick"
  109. [ 1.944976] Disabling unused clock "gpt10_ick"
  110. [ 1.945007] Disabling unused clock "gpt11_ick"
  111. [ 1.945037] Disabling unused clock "uart1_ick"
  112. [ 1.945068] Disabling unused clock "uart2_ick"
  113. [ 1.945129] Disabling unused clock "usbtll_ick"
  114. [ 1.945159] Disabling unused clock "ssi_ssr_fck"
  115. [ 1.945190] Disabling unused clock "uart1_fck"
  116. [ 1.945220] Disabling unused clock "uart2_fck"
  117. [ 1.945281] Disabling unused clock "usbtll_fck"
  118. [ 1.945343] Disabling unused clock "ts_fck"
  119. [ 1.945373] Disabling unused clock "cpefuse_fck"
  120. [ 1.945404] Disabling unused clock "gpt11_fck"
  121. [ 1.945434] Disabling unused clock "gpt10_fck"
  122. [ 1.945556] Disabling unused clock "dpll5_ck"
  123. [ 1.945648] Disabling unused clock "dpll4_m6x2_ck"
  124. [ 1.945678] Disabling unused clock "dpll4_m5x2_ck"
  125. [ 1.945709] Disabling unused clock "dpll3_m3x2_ck"
  126. [ 1.945770] Disabling unused clock "sys_clkout1"
  127. [ 1.946136] Bootup reason: por
  128. [ 1.946228] OMAP GPIO switch handler initializing
  129. [ 1.948883] slide (GPIO 71) is now closed
  130. [ 1.948944] proximity (GPIO 89) is now open
  131. [ 1.948974] kb_lock (GPIO 113) is now open
  132. [ 1.949005] headphone (GPIO 177) is now disconnected
  133. [ 1.949035] cam_shutter (GPIO 110) is now closed
  134. [ 1.949066] cam_launch (GPIO 69) is now inactive
  135. [ 1.949096] cam_focus (GPIO 68) is now inactive
  136. [ 1.949127] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 1
  137. [ 1.969207] omapfb: acx565akm rev 8d LCD detected
  138. [ 1.996032] tpa6130a2 2-0060: Headphone amplifier initialized successfully
  139. [ 2.016784] UBIFS: recovery needed
  140. [ 2.061157] UBIFS: recovery completed
  141. [ 2.061248] UBIFS: mounted UBI device 0, volume 0, name "rootfs"
  142. [ 2.061279] UBIFS: file system size: 254822400 bytes (248850 KiB, 243 MiB, 1975 LEBs)
  143. [ 2.061340] UBIFS: journal size: 9033728 bytes (8822 KiB, 8 MiB, 71 LEBs)
  144. [ 2.061370] UBIFS: media format: 4 (latest is 4)
  145. [ 2.061401] UBIFS: default compressor: lzo
  146. [ 2.061462] UBIFS: reserved for root: 4384586 bytes (4281 KiB)
  147. [ 2.061859] VFS: Mounted root (ubifs filesystem).
  148. [ 2.062072] Freeing init memory: 144K
  149. [ 2.221801] omap_wdt omap_wdt: OMAP Watchdog Timer Rev 0x31: initial timeout 60 sec, nowayout is on
  150. [ 2.316497] mmci-omap-hs mmci-omap-hs.0: Failed to get debounce clock
  151. [ 2.316680] mmc0: cover is open, card is now inaccessible
  152. [ 2.423339] mmci-omap-hs mmci-omap-hs.1: Failed to get debounce clock
  153. [ 2.549468] lp5523 2-0032: LP5523 Programmable led chip found
  154. [ 2.883239] cam_shutter (GPIO 110) is now open
  155. [ 2.883575] mmc1: new high speed MMC card at address 0001
  156. [ 2.884094] mmcblk0: mmc1:0001 MMC32G 29.8 GiB
  157. [ 2.884399] mmcblk0: p1 p2 p3
  158. [ 3.047302] cam_shutter (GPIO 110) is now closed
  159. [ 3.531677] cam_shutter (GPIO 110) is now open
  160. [ 3.547302] i2c_omap i2c_omap.2: controller timed out
  161. [ 3.607299] lp5523 2-0032: got interrupt from led chip
  162. [ 3.608062] lp5523 2-0032: interrupt from led chip 4f
  163. [ 3.608093] lp5523 2-0032: all engines configured
  164. [ 3.608154] lp5523 2-0032: disabling engines
  165. [ 3.608825] Registered led device: lp5523:kb1
  166. [ 3.609008] Registered led device: lp5523:kb2
  167. [ 3.609161] Registered led device: lp5523:kb3
  168. [ 3.609313] Registered led device: lp5523:kb4
  169. [ 3.609497] Registered led device: lp5523:b
  170. [ 3.609680] Registered led device: lp5523:g
  171. [ 3.609832] Registered led device: lp5523:r
  172. [ 3.609985] Registered led device: lp5523:kb5
  173. [ 3.610168] Registered led device: lp5523:kb6
  174. [ 3.861419] cam_shutter (GPIO 110) is now closed
  175. [ 5.380279] Registered led device: twl4030:vibrator
  176. [ 5.491973] twl4030_rtc twl4030_rtc: rtc core: registered twl4030_rtc as rtc0
  177. [ 5.500335] twl4030_rtc twl4030_rtc: Power up reset detected.
  178. [ 5.523742] twl4030_rtc twl4030_rtc: Enabling TWL4030-RTC.
  179. [ 5.590545] tsl2563 2-0029: model 7, rev. 0
  180. [ 5.758544] Linux video capture interface: v2.00
  181. [ 5.803771] I2C driver for Si4713 FM Radio Transmitter
  182. [ 5.884460] radio-si4713 2-0063: Detected Si4713 (0x0d) Firmware: 3.0 Patch ID: 00:00 Component: 3.0 Chip Rev.: unknown
  183. [ 6.376464] slide (GPIO 71) is now open
  184. [ 6.578918] Bluetooth: Core ver 2.15
  185. [ 6.590515] NET: Registered protocol family 31
  186. [ 6.590576] Bluetooth: HCI device and connection manager initialized
  187. [ 6.590606] Bluetooth: HCI socket layer initialized
  188. [ 6.607452] hci_h4p hci_h4p: Registering HCI H4P device
  189. [ 6.662384] nokia-av nokia-av: accessory detect module initialized
  190. [ 6.704467] TSC2005 driver initializing
  191. [ 6.705169] input: TSC2005 touchscreen as /class/input/input3
  192. [ 6.902282] SSI DRIVER Version 1.1-rc2
  193. [ 6.902801] omap_ssi omap_ssi: SSI Hardware REVISION 1.0
  194. [ 6.990356] smc91x: not found (-19).
  195. [ 6.997619] phy0: Selected rate control algorithm 'minstrel'
  196. [ 7.029205] wl1251: loaded
  197. [ 7.029937] wl1251: initialized
  198. [ 7.263366] CMT speech driver v0.2.0
  199. [ 7.266052] NET: Registered protocol family 35
  200. [ 7.294891] SSI McSAAB PROTOCOL Version: 2.0-rc1
  201. [ 7.451873] dspbridge_init: 412800 bytes @ 80600000
  202. [ 7.532348] omap-iommu omap-iommu.1: isp registered
  203. [ 7.685516] omap-iommu omap-iommu.1: isp: version 1.1
  204. [ 7.838928] smia-sensor 2-0010: firmware: requesting smia-sensor-01-022b-04.bin
  205. [ 7.861450] smia_reglist_import: meta_reglist version 2009-07-27
  206. [ 7.861541] smia_reglist_import: type 10 w 648 h 488 fmt 30314142 ival 100/1502 ptr d0ce42a0
  207. [ 7.861541] smia_reglist_import: type 10 w 648 h 488 fmt 30314142 ival 100/3003 ptr d0ce4228
  208. [ 7.861572] smia_reglist_import: type 1 w 0 h 0 fmt 30314142 ival 100/0 ptr d0ce4090
  209. [ 7.861602] smia_reglist_import: type 0 w 0 h 0 fmt 30314142 ival 100/0 ptr d0ce4038
  210. [ 7.876800] et8ek8 3-003e: firmware: requesting et8ek8-0002.bin
  211. [ 7.898590] smia_reglist_import: meta_reglist version V14 03-June-2008
  212. [ 7.898742] smia_reglist_import: type 10 w 2592 h 1968 fmt 30314442 ival 100/1292 ptr d0ce71f4
  213. [ 7.898773] smia_reglist_import: type 10 w 2592 h 1968 fmt 30314142 ival 100/399 ptr d0ce7454
  214. [ 7.898773] smia_reglist_import: type 10 w 1296 h 984 fmt 30314142 ival 100/501 ptr d0ce757c
  215. [ 7.898803] smia_reglist_import: type 10 w 1296 h 984 fmt 30314442 ival 100/2500 ptr d0ce7614
  216. [ 7.898834] smia_reglist_import: type 10 w 1296 h 984 fmt 30314442 ival 100/3000 ptr d0ce728c
  217. [ 7.898834] smia_reglist_import: type 10 w 864 h 656 fmt 30314142 ival 100/2988 ptr d0ce7324
  218. [ 7.898864] smia_reglist_import: type 10 w 648 h 492 fmt 30314142 ival 100/499 ptr d0ce74e4
  219. [ 7.898864] smia_reglist_import: type 10 w 648 h 492 fmt 30314142 ival 100/2993 ptr d0ce73bc
  220. [ 7.898895] smia_reglist_import: type 1 w 2592 h 1968 fmt 30314142 ival 100/1207 ptr d0ce704c
  221. [ 8.495391] g_file_storage gadget: File-backed Storage Gadget, version: 7 August 2007
  222. [ 8.495483] g_file_storage gadget: Number of LUNs=2 Number of buffers=16
  223. [ 8.495544] musb_hdrc musb_hdrc: MUSB HDRC host driver
  224. [ 8.496093] musb_hdrc musb_hdrc: new USB bus registered, assigned bus number 1
  225. [ 8.496551] usb usb1: configuration #1 chosen from 1 choice
  226. [ 8.496765] hub 1-0:1.0: USB hub found
  227. [ 8.496887] hub 1-0:1.0: 1 port detected
  228. [ 10.876068] Adding 786424k swap on /dev/mmcblk0p3. Priority:-1 extents:1 across:786424k
  229. [ 12.214202] EXT3-fs warning: mounting fs with errors, running e2fsck is recommended
  230. [ 12.214416] kjournald starting. Commit interval 1 seconds
  231. [ 12.224914] EXT3 FS on mmcblk0p2, internal journal
  232. [ 12.224945] EXT3-fs: recovery complete.
  233. [ 12.235870] EXT3-fs: mounted filesystem with writeback data mode.
  234. [ 16.495208] Bluetooth: L2CAP ver 2.13
  235. [ 16.495239] Bluetooth: L2CAP socket layer initialized
  236. [ 16.502563] McSAAB: ACWAKE DOWN
  237. [ 16.502624] McSAAB: ACWAKE UP
  238. [ 16.502655] McSAAB: WAKELINES TEST OK
  239. [ 16.658569] Bluetooth: SCO (Voice Link) ver 0.6
  240. [ 16.658599] Bluetooth: SCO socket layer initialized
  241. [ 16.662719] hci_h4p hci_h4p: firmware: requesting bcmfw.bin
  242. [ 17.221618] Bluetooth: RFCOMM socket layer initialized
  243. [ 17.221710] Bluetooth: RFCOMM TTY layer initialized
  244. [ 17.221710] Bluetooth: RFCOMM ver 1.11
  245. [ 20.954589] misc iphb: Module registered in 2.6.28-omap1, built Aug 6 2010 11:50:55
  246. [ 23.570648] cam_shutter (GPIO 110) is now open
  247. [ 29.146453] pvr: osso_startup_wi: cleaning up 97 unfreed resources
  248. [ 31.258117] cam_shutter (GPIO 110) is now closed
  249. [ 43.021575] cfg80211: Regulatory domain changed to country: US
  250. [ 43.021606] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
  251. [ 43.021636] (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
  252. [ 43.021667] (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
  253. [ 43.021667] (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
  254. [ 43.021697] (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
  255. [ 43.021697] (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
  256. [ 43.021697] (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
  257. [ 44.330841] SCSI subsystem initialized
  258. [ 44.608978] Driver 'sd' needs updating - please use bus_type methods
  259. [ 44.828735] wl12xx spi4.0: firmware: requesting wl1251-fw.bin
  260. [ 45.797332] wl1251: 151 tx blocks at 0x3b788, 35 rx blocks at 0x3a780
  261. [ 45.813354] wl1251: firmware booted (Rev 4.0.4.3.7)
  262. [ 46.828735] wl1251: down
  263. [ 47.711273] slide (GPIO 71) is now closed
  264. [ 48.180175] wl1251: 151 tx blocks at 0x3b788, 35 rx blocks at 0x3a780
  265. [ 48.195800] wl1251: firmware booted (Rev 4.0.4.3.7)
  266. [ 49.102172] wlan0: direct probe to AP 80:c6:ab:29:eb:df try 1
  267. [ 49.105773] wlan0 direct probe responded
  268. [ 49.105804] wlan0: authenticate with AP 80:c6:ab:29:eb:df
  269. [ 49.108123] wlan0: authenticated
  270. [ 49.108154] wlan0: associate with AP 80:c6:ab:29:eb:df
  271. [ 49.111267] wlan0: RX AssocResp from 80:c6:ab:29:eb:df (capab=0x411 status=0 aid=1)
  272. [ 49.111297] wlan0: associated
  273. [ 50.039733] wlan0: roaming signal from driver, sending LOWSIGNAL
  274. [ 50.148742] cam_shutter (GPIO 110) is now open
  275. [ 50.476867] cam_shutter (GPIO 110) is now closed
  276. [ 51.678344] wlan0: roaming signal from driver, sending HIGHSIGNAL
  277. [ 55.262390] wlan0: roaming signal from driver, sending LOWSIGNAL
  278. [ 64.991577] wlan0: roaming signal from driver, sending HIGHSIGNAL
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!