API tools faq
paste
Guest User

Untitled

a guest
Feb 7th, 2014
58
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 5.76 KB | None | 0 0
raw download clone embed print report
  1. <6>[ 156.514359] c0 137 [TP] back key pressed
  2. <6>[ 156.651091] c0 137 [TP] virtual key released
  3. <6>[ 156.771402] c0 137 [TP] home key pressed
  4. <6>[ 156.776773] c0 725 [BB] led_current_set 255
  5. <6>[ 156.776804] c0 725 [LED]pm8xxx_led_current_set_flagged, bank:6, brightness:255
  6. <6>[ 156.778422] c0 601 [GSNR][BMA250_BOSCH] bma250_enable_store: data = 1
  7. <6>[ 156.778422] c0 601 [GSNR][BMA250_BOSCH] bma250_set_enable: enable = 1
  8. <6>[ 156.778452] c0 601 [GSNR][BMA250_BOSCH] bma250_set_mode++: mode = 0, bma250->ref_count = 0
  9. <7>[ 156.778483] c0 601 [GSNR][BMA250_BOSCH] bma250_set_mode: Set to High Power mode!!
  10. <7>[ 156.778513] c0 601 [GSNR][BMA250_BOSCH] m7_g_sensor_power_LPM, on = 0, g_sensor_vreg_8921_l17 = 0xdc7aa400
  11. <7>[ 156.783061] c0 601 [GSNR][BMA250_BOSCH] m7_g_sensor_power_LPM, Set to Normal Mode
  12. <7>[ 156.783091] c0 601 [GSNR][BMA250_BOSCH]m7_g_sensor_power_LPM: unlock 5
  13. <6>[ 156.783854] c0 601 [GSNR][BMA250_BOSCH] bma250_set_mode--33: mode = 0, bma250->ref_count = 1
  14. <6>[ 156.787822] c0 712 [LS][cm3629] lightsensor_open, calibration:1
  15. <6>[ 156.787883] c0 712 [LS][cm3629] lightsensor_ioctl LIGHTSENSOR_IOCTL_ENABLE, value = 1
  16. <6>[ 156.787913] c0 712 [PS][cm3629] capella_pl_sensor_lpm_power: pl_sensor_lock lock
  17. <6>[ 156.795025] c0 712 [PS][cm3629] capella_pl_sensor_lpm_power: leave lmp,OK
  18. <6>[ 156.802594] c0 712 [PS][cm3629] capella_pl_sensor_lpm_power: pl_sensor_lock unlock 4
  19. <6>[ 156.802624] c0 712 [LS][cm3629] lightsensor_enable
  20. <6>[ 156.848130] c0 137 [TP] virtual key released
  21. <6>[ 156.869281] c0 762 dhd_set_suspend: Remove extra suspend setting
  22. <6>[ 156.970334] c0 712 [LS][cm3629] get_ls_adc_value:resume 1
  23. <6>[ 156.972379] c0 712 [LS][cm3629] get_ls_adc_value: raw adc = 0x227, ls_calibrate = 0
  24. <6>[ 156.972409] c0 712 [cm3629] set_lsensor_range: low_thd = 0x179, high_thd = 0x930
  25. <6>[ 156.974027] c0 712 [LS][cm3629] report_lsensor_input_event: ADC=0x928, Level=5, l_thd = 0x179, h_thd = 0x930, calibration 1
  26. <6>[ 156.976773] c1 1662 request_suspend_state: wakeup (3->0) at 156966605070 (2014-02-07 21:32:52.310367001 UTC)
  27. <6>[ 156.976835] c1 1662 request_suspend_state : PWR KEY INT ENABLE : 1
  28. <6>[ 156.976865] c1 2007 [R] late_resume start
  29. <6>[ 156.976896] c1 2007 [CPUQUIET]: cpuquiet_late_resume: release limit to 2 cores
  30. <6>[ 156.976926] c1 2007 [CPUFREQ_CAP]: cpufreq_late_resume: release limit freq to 702000
  31. <6>[ 156.976957] c1 2007 [DISP] sii9234_late_resume()
  32. <6>[ 156.977018] c1 2007 [TP] synaptics_ts_resume: enter
  33. <6>[ 156.977048] c1 2007 [TP] synaptics_ts_resume: Enable P-sensor by Touch
  34. <6>[ 156.977079] c1 2007 [PS][cm3629] psensor_enable_by_touch_driver on:1
  35. <6>[ 156.977109] c1 2007 [PS][cm3629] psensor_enable lpi->dynamical_threshold :1,lpi->mfg_mode:0
  36. <6>[ 156.977109] c1 2007 [PS][cm3629] capella_pl_sensor_lpm_power: pl_sensor_lock lock
  37. <6>[ 156.977140] c1 2007 [PS][cm3629] capella_pl_sensor_lpm_power: leave lmp,OK
  38. <6>[ 156.977323] c1 2007 [PS][cm3629] capella_pl_sensor_lpm_power: pl_sensor_lock unlock 4
  39. <6>[ 156.977353] c1 2007 [TP] psensor status 0 -> 1
  40. <6>[ 156.978177] c1 2007 [PS][cm3629] psensor_initial_cmd, finish
  41. <6>[ 156.978422] c1 2007 [PS][cm3629] pocket_mode_flag: 0, psensor_enable_by_touch: 1, add delay = 7ms
  42. <6>[ 156.985624] c1 2007 [PS][cm3629]ps1_adc = 0 retry
  43. <6>[ 156.986906] c0 2007 [PS][cm3629]ps1_adc = 0 retry
  44. <6>[ 156.988158] c0 2007 [PS][cm3629]ps1_adc = 0 retry
  45. <6>[ 156.988219] c1 204 [DISP] mipi_dsi_panel_power: on=1
  46. <6>[ 156.991088] c0 2007 [PS][cm3629]ps1_adc = 0 retry
  47. <6>[ 156.993071] c0 2007 [PS][cm3629]ps1_adc = 0 retry
  48. <6>[ 156.994292] c0 2007 [PS][cm3629]ps1_adc = 0 retry
  49. <6>[ 156.995482] c0 2007 [PS][cm3629]ps1_adc = 0 retry
  50. <6>[ 156.997100] c0 2007 [PS][cm3629]ps1_adc = 0 retry
  51. <6>[ 157.001434] c1 2007 [PS][cm3629]ps1_adc = 0 retry
  52. <6>[ 157.002655] c1 2007 [PS][cm3629]ps1_adc = 0 retry
  53. <6>[ 157.004150] c1 2007 [PS][cm3629]ps1_adc = 0 retry
  54. <6>[ 157.005371] c1 2007 [PS][cm3629] proximity FAR, ps_adc=0, High thd= 62, interrupt_flag 0, calibration 1
  55. <6>[ 157.005432] c1 2007 [TP] psensor status 1 -> 3
  56. <6>[ 157.005493] c0 115 [TP] synaptics_ts_close_psensor_func: Disable P-sensor by Touch
  57. <6>[ 157.005524] c0 115 [PS][cm3629] psensor_enable_by_touch_driver on:0
  58. <6>[ 157.006165] c1 2007 [PS][cm3629] enable_ps_interrupt, write cmd[0] = 0x24, cmd[1] = 0x43
  59. <6>[ 157.006531] c1 2007 [PS][cm3629] enable_ps_interrupt, read value => cmd[0] = 0x24, cmd[1] = 0x43
  60. <6>[ 157.006561] c1 2007 [PS][cm3629] psensor_enable -
  61. <6>[ 157.006561] c1 2007 [PS][cm3629] capella_pl_sensor_lpm_power: pl_sensor_lock lock
  62. <6>[ 157.006592] c1 2007 [PS][cm3629] capella_pl_sensor_lpm_power: leave lmp,OK
  63. <6>[ 157.006592] c0 115 [PS][cm3629] psensor_disable 1
  64. <6>[ 157.006744] c1 2007 [PS][cm3629] capella_pl_sensor_lpm_power: pl_sensor_lock unlock 4
  65. <6>[ 157.006744] c1 2007 [LS][cm3629] cm3629_late_resume
  66. <6>[ 157.006775] c1 2007 [R] late_resume end
  67. <6>[ 157.006806] c0 114 [BATT] batt_worker: total_time since last batt update = 3660 ms. at 156996637116 (2014-02-07 21:32:52.340399047 UTC)
  68. <6>[ 157.006958] c0 115 [TP] psensor status 3 -> 0
  69. <6>[ 157.006958] c0 115 [PS][cm3629] psensor_disable: record_adc[0-4]: 0, 0, 0, 0, 0
  70. <6>[ 157.006989] c0 115 [PS][cm3629] psensor_disable: restore lpi->ps1_thd_set = 61
  71. <6>[ 157.007172] c0 115 [PS][cm3629] psensor_disable --0
  72. <6>[ 157.162795] c0 204 [DISP] m7_lcd_on, PANEL type = PANEL_ID_M7_JDI_SAMSUNG_C2_2, PWM A2
  73. <6>[ 157.184220] c0 204 [DISP] m7_display_on
  74. <4>[ 157.184465] c0 204 hdmi_msm hdmi_msm.1: hdmi_common_wta_hpd: '0'
  75. <6>[ 157.197527] c2 204 mdp4_overlay_mdp_perf_upd mdp clk is changed [1] from 0 to 160000000
Advertisement
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!