Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- $ cat /tmp/diskSG.log
- smartctl 6.4 2015-06-04 r4109 [x86_64-linux-4.4.3-calculate] (local build)
- Copyright (C) 2002-15, Bruce Allen, Christian Franke, www.smartmontools.org
- Smartctl open device: /dev/sdc failed: No such device
- smartctl 6.4 2015-06-04 r4109 [x86_64-linux-4.4.3-calculate] (local build)
- Copyright (C) 2002-15, Bruce Allen, Christian Franke, www.smartmontools.org
- === START OF INFORMATION SECTION ===
- Model Family: Seagate Momentus 5400.5
- Device Model: ST9250320AS
- Serial Number: 5SW00R6W
- LU WWN Device Id: 5 000c50 00e556189
- Firmware Version: BS03
- User Capacity: 250,059,350,016 bytes [250 GB]
- Sector Size: 512 bytes logical/physical
- Device is: In smartctl database [for details use: -P show]
- ATA Version is: ATA8-ACS T13/1699-D revision 4
- SATA Version is: SATA 2.6, 1.5 Gb/s
- Local Time is: Wed Mar 23 19:59:19 2016 MSK
- SMART support is: Available - device has SMART capability.
- SMART support is: Enabled
- AAM feature is: Unavailable
- APM level is: 128 (minimum power consumption without standby)
- Rd look-ahead is: Enabled
- Write cache is: Enabled
- ATA Security is: Disabled, NOT FROZEN [SEC1]
- Write SCT (Get) Feature Control Command failed: Read of ATA output registers not implemented [JMicron]
- Wt Cache Reorder: Unknown (SCT Feature Control command failed)
- === START OF READ SMART DATA SECTION ===
- SMART overall-health self-assessment test result: PASSED
- General SMART Values:
- Offline data collection status: (0x82) Offline data collection activity
- was completed without error.
- Auto Offline Data Collection: Enabled.
- Self-test execution status: ( 0) The previous self-test routine completed
- without error or no self-test has ever
- been run.
- Total time to complete Offline
- data collection: ( 712) seconds.
- Offline data collection
- capabilities: (0x73) SMART execute Offline immediate.
- Auto Offline data collection on/off support.
- Suspend Offline collection upon new
- command.
- No Offline surface scan supported.
- Self-test supported.
- Conveyance Self-test supported.
- Selective Self-test supported.
- SMART capabilities: (0x0003) Saves SMART data before entering
- power-saving mode.
- Supports SMART auto save timer.
- Error logging capability: (0x01) Error logging supported.
- General Purpose Logging supported.
- Short self-test routine
- recommended polling time: ( 1) minutes.
- Extended self-test routine
- recommended polling time: ( 92) minutes.
- Conveyance self-test routine
- recommended polling time: ( 2) minutes.
- SCT capabilities: (0x103f) SCT Status supported.
- SCT Error Recovery Control supported.
- SCT Feature Control supported.
- SCT Data Table supported.
- SMART Attributes Data Structure revision number: 10
- Vendor Specific SMART Attributes with Thresholds:
- ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
- 1 Raw_Read_Error_Rate POSR-- 112 098 006 - 44205537
- 3 Spin_Up_Time PO---- 098 093 000 - 0
- 4 Start_Stop_Count -O--CK 098 098 020 - 2397
- 5 Reallocated_Sector_Ct PO--CK 100 100 036 - 0
- 7 Seek_Error_Rate POSR-- 066 060 030 - 5152082
- 9 Power_On_Hours -O--CK 099 099 000 - 1255
- 10 Spin_Retry_Count PO--C- 100 100 097 - 38
- 12 Power_Cycle_Count -O--CK 099 099 020 - 1210
- 184 End-to-End_Error -O--CK 100 100 099 - 0
- 187 Reported_Uncorrect -O--CK 001 001 000 - 109
- 188 Command_Timeout -O--CK 100 099 000 - 51540394038
- 189 High_Fly_Writes -O-RCK 100 100 000 - 0
- 190 Airflow_Temperature_Cel -O---K 077 048 045 - 23 (Min/Max 23/23)
- 191 G-Sense_Error_Rate -O--CK 100 100 000 - 0
- 192 Power-Off_Retract_Count -O--CK 100 100 000 - 0
- 193 Load_Cycle_Count -O--CK 092 092 000 - 16470
- 194 Temperature_Celsius -O---K 023 052 000 - 23 (0 13 0 0 0)
- 195 Hardware_ECC_Recovered -O-RC- 046 027 000 - 44205537
- 197 Current_Pending_Sector -O--C- 100 100 000 - 0
- 198 Offline_Uncorrectable ----C- 100 100 000 - 0
- 199 UDMA_CRC_Error_Count -OSRCK 200 200 000 - 0
- ||||||_ K auto-keep
- |||||__ C event count
- ||||___ R error rate
- |||____ S speed/performance
- ||_____ O updated online
- |______ P prefailure warning
- ATA_READ_LOG_EXT (addr=0x00:0x00, page=0, n=1) failed: 48-bit ATA commands not implemented [JMicron]
- Read GP Log Directory failed
- SMART Log Directory Version 1 [multi-sector log support]
- Address Access R/W Size Description
- 0x00 SL R/O 1 Log Directory
- 0x01 SL R/O 1 Summary SMART error log
- 0x02 SL R/O 5 Comprehensive SMART error log
- 0x03 SL R/O 5 Ext. Comprehensive SMART error log
- 0x06 SL R/O 1 SMART self-test log
- 0x07 SL R/O 1 Extended self-test log
- 0x09 SL R/W 1 Selective self-test log
- 0x10 SL R/O 1 SATA NCQ Queued Error log
- 0x11 SL R/O 1 SATA Phy Event Counters log
- 0x21 SL R/O 1 Write stream error log
- 0x22 SL R/O 1 Read stream error log
- 0x80-0x9f SL R/W 16 Host vendor specific log
- 0xa1 SL VS 20 Device vendor specific log
- 0xa8 SL VS 20 Device vendor specific log
- 0xa9 SL VS 1 Device vendor specific log
- 0xe0 SL R/W 1 SCT Command/Status
- 0xe1 SL R/W 1 SCT Data Transfer
- SMART Extended Comprehensive Error Log (GP Log 0x03) not supported
- SMART Error Log Version: 1
- ATA Error Count: 97 (device log contains only the most recent five errors)
- CR = Command Register [HEX]
- FR = Features Register [HEX]
- SC = Sector Count Register [HEX]
- SN = Sector Number Register [HEX]
- CL = Cylinder Low Register [HEX]
- CH = Cylinder High Register [HEX]
- DH = Device/Head Register [HEX]
- DC = Device Command Register [HEX]
- ER = Error register [HEX]
- ST = Status register [HEX]
- Powered_Up_Time is measured from power on, and printed as
- DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
- SS=sec, and sss=millisec. It "wraps"
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement