API tools faq
paste
Advertisement
Guest User

dmesg.log_2.6.39_beagleboard

a guest
Nov 25th, 2011
113
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
Bash 15.78 KB | None | 0 0
raw download clone embed print report
  1. [    0.000000] Initializing cgroup subsys cpuset
  2. [    0.000000] Initializing cgroup subsys cpu
  3. [    0.000000] Linux version 2.6.39 (chapkinav@t-chapkin) (gcc version 4.3.3 (Sourcery G++ Lite 2009q1-203) ) #5 Fri Nov 25 10:59:52 MSK 2011
  4. [    0.000000] CPU: ARMv7 Processor [411fc083] revision 3 (ARMv7), cr=10c53c7f
  5. [    0.000000] CPU: VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
  6. [    0.000000] Machine: OMAP3 Beagle Board
  7. [    0.000000] Reserving 14680064 bytes SDRAM for VRAM
  8. [    0.000000] Memory policy: ECC disabled, Data cache writeback
  9. [    0.000000] OMAP3430/3530 ES3.1 (l2cache iva sgx neon isp )
  10. [    0.000000] SRAM: Mapped pa 0x40200000 to va 0xfe400000 size: 0x10000
  11. [    0.000000] On node 0 totalpages: 54528
  12. [    0.000000] free_area_init_node: node 0, pgdat c0636d08, node_mem_map c0672000
  13. [    0.000000]   Normal zone: 512 pages used for memmap
  14. [    0.000000]   Normal zone: 0 pages reserved
  15. [    0.000000]   Normal zone: 54016 pages, LIFO batch:15
  16. [    0.000000] Clocking rate (Crystal/Core/MPU): 26.0/332/500 MHz
  17. [    0.000000] Reprogramming SDRC clock to 332000000 Hz
  18. [    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
  19. [    0.000000] pcpu-alloc: [0] 0
  20. [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 54016
  21. [    0.000000] Kernel command line: console=ttyS2,115200n8 root=/dev/mmcblk0p2 rw vram=14M mpurate=600 rootfstype=ext3 rootwait mem=99M@0x80000000 mem=128M@0x88000000 omapfb.mode=dvi:1280x720MR-16@60 omapdss.def_disp=dvi omap_vout.vi
  22. [    0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
  23. [    0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
  24. [    0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
  25. [    0.000000] allocated 1048576 bytes of page_cgroup
  26. [    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
  27. [    0.000000] Memory: 99MB 114MB = 213MB total
  28. [    0.000000] Memory: 208424k/208424k available, 24024k reserved, 0K highmem
  29. [    0.000000] Virtual kernel memory layout:
  30. [    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
  31. [    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
  32. [    0.000000]     DMA     : 0xffc00000 - 0xffe00000   (   2 MB)
  33. [    0.000000]     vmalloc : 0xd0800000 - 0xf8000000   ( 632 MB)
  34. [    0.000000]     lowmem  : 0xc0000000 - 0xd0000000   ( 256 MB)
  35. [    0.000000]     modules : 0xbf000000 - 0xc0000000   (  16 MB)
  36. [    0.000000]       .init : 0xc0008000 - 0xc0039000   ( 196 kB)
  37. [    0.000000]       .text : 0xc0039000 - 0xc05ee3e4   (5845 kB)
  38. [    0.000000]       .data : 0xc05f0000 - 0xc06373c0   ( 285 kB)
  39. [    0.000000] NR_IRQS:410
  40. [    0.000000] IRQ: Found an INTC at 0xfa200000 (revision 4.0) with 96 interrupts
  41. [    0.000000] Total of 96 interrupts on 1 active controller
  42. [    0.000000] omap_hwmod: gpt12_fck: missing clockdomain for gpt12_fck.
  43. [    0.000000] OMAP clockevent source: GPTIMER12 at 32768 Hz
  44. [    0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 131071999ms
  45. [    0.000000] Console: colour dummy device 80x30
  46. [    0.000244] Calibrating delay loop... 484.21 BogoMIPS (lpj=1892352)
  47. [    0.038146] pid_max: default: 32768 minimum: 301
  48. [    0.038391] Mount-cache hash table entries: 512
  49. [    0.038879] Initializing cgroup subsys ns
  50. [    0.038909] ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup.
  51. [    0.038909] Initializing cgroup subsys cpuacct
  52. [    0.038970] Initializing cgroup subsys memory
  53. [    0.039031] Initializing cgroup subsys devices
  54. [    0.039031] Initializing cgroup subsys freezer
  55. [    0.039062] Initializing cgroup subsys blkio
  56. [    0.039093] Initializing cgroup subsys perf_event
  57. [    0.039215] CPU: Testing write buffer coherency: ok
  58. [    0.040344] devtmpfs: initialized
  59. [    0.041961] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l4_core
  60. [    0.041961] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l4_per
  61. [    0.041992] omap_hwmod: _populate_mpu_rt_base found no _mpu_rt_va for l4_wkup
  62. [    0.057647] omap_hwmod: i2c1: softreset failed (waited 10000 usec)
  63. [    0.071838] omap_hwmod: i2c2: softreset failed (waited 10000 usec)
  64. [    0.085998] omap_hwmod: i2c3: softreset failed (waited 10000 usec)
  65. [    0.086700] omap_hwmod: am35x_otg_hs: cannot be enabled (3)
  66. [    0.087615] print_constraints: dummy:
  67. [    0.087921] NET: Registered protocol family 16
  68. [    0.088134] GPMC revision 5.0
  69. [    0.089508] OMAP GPIO hardware version 2.5
  70. [    0.089660] OMAP GPIO hardware version 2.5
  71. [    0.089782] OMAP GPIO hardware version 2.5
  72. [    0.089935] OMAP GPIO hardware version 2.5
  73. [    0.090057] OMAP GPIO hardware version 2.5
  74. [    0.090179] OMAP GPIO hardware version 2.5
  75. [    0.091766] omap_mux_init: Add partition: #1: core, flags: 0
  76. [    0.091888] OMAP3 Beagle Rev: unknown 3, assuming xM C or newer
  77. [    0.094787] Found NAND on CS0
  78. [    0.094818] Registering NAND on CS0
  79. [    0.095184] Unable to get DVI reset GPIO
  80. [    0.095275] hw-breakpoint: debug architecture 0x4 unsupported.
  81. [    0.137390] Switched to new clocking rate (Crystal/Core/MPU): 26.0/332/600 MHz
  82. [    0.137573] OMAP DMA hardware revision 4.0
  83. [    0.147735] bio: create slab <bio-0> at 0
  84. [    0.149047] SCSI subsystem initialized
  85. [    0.149505] omap_device: omap2_mcspi.1: new worst case deactivate latency 0: 30517
  86. [    0.150634] usbcore: registered new interface driver usbfs
  87. [    0.150817] usbcore: registered new interface driver hub
  88. [    0.151000] usbcore: registered new device driver usb
  89. [    0.151611] omap_i2c omap_i2c.1: bus 1 rev3.12 at 2600 kHz
  90. [    0.154541] twl4030: PIH (irq 7) chaining IRQs 368..375
  91. [    0.154571] twl4030: power (irq 373) chaining IRQs 376..383
  92. [    0.155059] twl4030: gpio (irq 368) chaining IRQs 384..401
  93. [    0.157043] print_constraints: VUSB1V5: 1500 mV normal standby
  94. [    0.157501] print_constraints: VUSB1V8: 1800 mV normal standby
  95. [    0.157928] print_constraints: VUSB3V1: 3100 mV normal standby
  96. [    0.159790] twl4030_usb twl4030_usb: Initialized TWL4030 USB module
  97. [    0.160675] print_constraints: VMMC1: 1850 <--> 3150 mV at 3000 mV normal standby
  98. [    0.161193] print_constraints: VDAC: 1800 mV normal standby
  99. [    0.161651] print_constraints: VDVI: 1800 mV normal standby
  100. [    0.162200] print_constraints: VSIM: 1800 <--> 3000 mV at 1800 mV normal standby
  101. [    0.162750] print_constraints: VAUX3: 1800 mV normal standby
  102. [    0.163269] print_constraints: VAUX4: 1800 mV normal standby
  103. [    0.163452] omap_device: omap_i2c.1: new worst case deactivate latency 0: 30517
  104. [    0.163604] omap_i2c omap_i2c.2: bus 2 rev3.12 at 400 kHz
  105. [    0.164001] omap_i2c omap_i2c.3: bus 3 rev3.12 at 100 kHz
  106. [    0.164794] Advanced Linux Sound Architecture Driver Version 1.0.24.
  107. [    0.165466] Bluetooth: Core ver 2.16
  108. [    0.165557] NET: Registered protocol family 31
  109. [    0.165557] Bluetooth: HCI device and connection manager initialized
  110. [    0.165588] Bluetooth: HCI socket layer initialized
  111. [    0.165588] Bluetooth: L2CAP socket layer initialized
  112. [    0.165802] Bluetooth: SCO socket layer initialized
  113. [    0.166107] Switching to clocksource 32k_counter
  114. [    0.167877] Switched to NOHz mode on CPU #0
  115. [    0.179595] musb-hdrc: version 6.0, musb-dma, otg (peripheral+host), debug=0
  116. [    0.182983] musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn)
  117. [    0.182983] musb-hdrc: MHDRC RTL version 1.400
  118. [    0.183013] musb-hdrc: setup fifo_mode 4
  119. [    0.183044] musb-hdrc: 28/31 max ep, 16384/16384 memory
  120. [    0.183227] musb-hdrc musb-hdrc: USB OTG mode controller at fa0ab000 using DMA, IRQ 92
  121. [    0.183868] NET: Registered protocol family 2
  122. [    0.184112] IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
  123. [    0.184539] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
  124. [    0.184783] TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
  125. [    0.184936] TCP: Hash tables configured (established 8192 bind 8192)
  126. [    0.184967] TCP reno registered
  127. [    0.184967] UDP hash table entries: 256 (order: 0, 4096 bytes)
  128. [    0.184997] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
  129. [    0.185424] NET: Registered protocol family 1
  130. [    0.186767] RPC: Registered udp transport module.
  131. [    0.186798] RPC: Registered tcp transport module.
  132. [    0.186828] RPC: Registered tcp NFSv4.1 backchannel transport module.
  133. [    0.187957] omap-iommu omap-iommu.0: isp registered
  134. [    0.189910] VFS: Disk quotas dquot_6.5.2
  135. [    0.189971] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  136. [    0.190582] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  137. [    0.191009] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
  138. [    0.191040] JFFS2 version 2.2. (NAND) (SUMMARY)  © 2001-2006 Red Hat, Inc.
  139. [    0.191467] msgmni has been set to 407
  140. [    0.193328] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
  141. [    0.193481] io scheduler noop registered
  142. [    0.193511] io scheduler deadline registered
  143. [    0.193603] io scheduler cfq registered (default)
  144. [    0.252227] OMAP DSS rev 2.0
  145. [    0.580963] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
  146. [    0.582458] omap_uart.0: ttyO0 at MMIO 0x4806a000 (irq = 72) is a OMAP UART0
  147. [    0.582794] omap_uart.1: ttyO1 at MMIO 0x4806c000 (irq = 73) is a OMAP UART1
  148. [    0.583068] omap_uart.2: ttyO2 at MMIO 0x49020000 (irq = 74) is a OMAP UART2
  149. [    0.591766] brd: module loaded
  150. [    0.596099] loop: module loaded
  151. [    0.596984] TWL5030: Enabling workaround for Si Erratum 27
  152. [    0.618530] omap2-nand driver initializing
  153. [    0.618865] ONFI flash detected
  154. [    0.619140] NAND device: Manufacturer ID: 0x2c, Chip ID: 0xba (Micron NAND 256MiB 1,8V 16-bit)
  155. [    0.619720] cmdlinepart partition parsing not available
  156. [    0.619750] Creating 5 MTD partitions on "omap2-nand.0":
  157. [    0.619781] 0x000000000000-0x000000080000 : "X-Loader"
  158. [    0.621337] 0x000000080000-0x000000260000 : "U-Boot"
  159. [    0.623321] 0x000000260000-0x000000280000 : "U-Boot Env"
  160. [    0.624542] 0x000000280000-0x000000680000 : "Kernel"
  161. [    0.627471] 0x000000680000-0x000010000000 : "File System"
  162. [    0.730804] smsc911x: Driver version 2008-10-21.
  163. [    0.731201] usbcore: registered new interface driver cdc_ether
  164. [    0.731323] usbcore: registered new interface driver smsc75xx
  165. [    0.731445] usbcore: registered new interface driver smsc95xx
  166. [    0.731506] usbcore: registered new interface driver zaurus
  167. [    0.731658] usbcore: registered new interface driver zd1201
  168. [    0.732177] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  169. [    0.732299] _regulator_get: ehci-omap.0 supply hsusb0 not found, using dummy regulator
  170. [    0.732360] _regulator_get: ehci-omap.0 supply hsusb1 not found, using dummy regulator
  171. [    2.744323] ehci-omap ehci-omap.0: OMAP-EHCI Host Controller
  172. [    2.744964] ehci-omap ehci-omap.0: new USB bus registered, assigned bus number 1
  173. [    2.745117] ehci-omap ehci-omap.0: irq 77, io mem 0x48064800
  174. [    2.759979] ehci-omap ehci-omap.0: USB 2.0 started, EHCI 1.00
  175. [    2.760101] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  176. [    2.760131] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  177. [    2.760131] usb usb1: Product: OMAP-EHCI Host Controller
  178. [    2.760162] usb usb1: Manufacturer: Linux 2.6.39 ehci_hcd
  179. [    2.760162] usb usb1: SerialNumber: ehci-omap.0
  180. [    2.760955] hub 1-0:1.0: USB hub found
  181. [    2.760986] hub 1-0:1.0: 3 ports detected
  182. [    2.791320] Initializing USB Mass Storage driver...
  183. [    2.791503] usbcore: registered new interface driver usb-storage
  184. [    2.791503] USB Mass Storage support registered.
  185. [    2.791961] mousedev: PS/2 mouse device common for all mice
  186. [    2.792510] input: gpio-keys as /devices/platform/gpio-keys/input/input0
  187. [    2.793884] input: twl4030_pwrbutton as /devices/platform/omap/omap_i2c.1/i2c-1/1-0049/twl4030_pwrbutton/input/input1
  188. [    3.791259] omap_i2c omap_i2c.2: controller timed out
  189. [    3.791351] rtc-ds1307: probe of 2-0068 failed with error -5
  190. [    3.791442] i2c /dev entries driver
  191. [    3.792205] Linux media interface: v0.10
  192. [    3.792297] Linux video capture interface: v2.00
  193. [    3.792633] vpfe_init
  194. [    3.793273] OMAP Watchdog Timer Rev 0x31: initial timeout 60 sec
  195. [    3.793365] Bluetooth: HCI UART driver ver 2.2
  196. [    3.793395] Bluetooth: HCI H4 protocol initialized
  197. [    3.793395] Bluetooth: HCI BCSP protocol initialized
  198. [    3.793426] Bluetooth: HCILL protocol initialized
  199. [    3.793426] Bluetooth: HCIATH3K protocol initialized
  200. [    3.793457] Bluetooth: Generic Bluetooth USB driver ver 0.6
  201. [    3.793579] usbcore: registered new interface driver btusb
  202. [    3.793670] cpuidle: using governor ladder
  203. [    3.793670] cpuidle: using governor menu
  204. [    3.796630] _regulator_get: omap_hsmmc.1 supply vmmc not found, using dummy regulator
  205. [    3.796905] _regulator_get: omap_hsmmc.1 supply vmmc_aux not found, using dummy regulator
  206. [    3.797485] Registered led device: beagleboard::usr0
  207. [    3.797607] Registered led device: beagleboard::usr1
  208. [    3.798217] Registered led device: beagleboard::pmu_stat
  209. [    3.799865] usbcore: registered new interface driver usbhid
  210. [    3.799865] usbhid: USB HID core driver
  211. [    3.800415] usbcore: registered new interface driver snd-usb-audio
  212. [    3.800720] ALSA device list:
  213. [    3.800750]   No soundcards found.
  214. [    3.800750] oprofile: hardware counters not available
  215. [    3.800781] oprofile: using timer interrupt.
  216. [    3.800994] TCP cubic registered
  217. [    3.801025] NET: Registered protocol family 17
  218. [    3.801086] NET: Registered protocol family 15
  219. [    3.801116] lib80211: common routines for IEEE802.11 drivers
  220. [    3.801147] lib80211_crypt: registered algorithm 'NULL'
  221. [    3.801147] Registering the dns_resolver key type
  222. [    3.801208] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 1
  223. [    3.801330] ThumbEE CPU extension supported.
  224. [    3.802978] Power Management for TI OMAP3.
  225. [    3.803710] sr_init: No PMIC hook to init smartreflex
  226. [    3.803924] smartreflex smartreflex.0: omap_sr_probe: SmartReflex driver initialized
  227. [    3.804107] smartreflex smartreflex.1: omap_sr_probe: SmartReflex driver initialized
  228. [    3.804260] SmartReflex Class3 initialized
  229. [    3.810638] clock: disabling unused clocks to save power
  230. [    3.811645] registered taskstats version 1
  231. [    3.812744] fbcvt: 1280x720@60: CVT Name - .921M9-R
  232. [    3.838500] Console: switching to colour frame buffer device 160x45
  233. [    3.853271] regulator_init_complete: VAUX3: incomplete constraints, leaving on
  234. [    3.853942] regulator_init_complete: VDAC: incomplete constraints, leaving on
  235. [    3.854858] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
  236. [    3.855041] omap_vout omap_vout: Buffer Size = 3686400
  237. [    3.856201] omap_vout omap_vout: : registered and initialized video device 0
  238. [    3.856414] Warning: unable to open an initial console.
  239. [    3.856689] Waiting for root device /dev/mmcblk0p2...
  240. [    4.002288] mmc0: new high speed SDHC card at address b368
  241. [    4.002899] mmcblk0: mmc0:b368 NCard 7.39 GiB
  242. [    4.003479] mmcblk0: detected capacity change from 0 to 7945060352
  243. [    4.005035]  mmcblk0: p1 p2
  244. [    4.005950] omap_hsmmc omap_hsmmc.1: could not set regulator OCR (-22)
  245. [    4.072998] omap_hsmmc omap_hsmmc.1: could not set regulator OCR (-22)
  246. [    4.076995] EXT3-fs: barriers not enabled
  247. [   10.298950] kjournald starting.  Commit interval 5 seconds
  248. [   10.594421] EXT3-fs (mmcblk0p2): using internal journal
  249. [   10.594451] EXT3-fs (mmcblk0p2): recovery complete
  250. [   11.001678] EXT3-fs (mmcblk0p2): mounted filesystem with writeback data mode
  251. [   11.001770] VFS: Mounted root (ext3 filesystem) on device 179:2.
  252. [   11.004516] devtmpfs: mounted
  253. [   11.004608] Freeing init memory: 196K
  254. [   11.558380] NET: Registered protocol family 10
  255. [   12.427490] twl_rtc twl_rtc: rtc core: registered twl_rtc as rtc0
  256. [   12.427703] twl_rtc twl_rtc: Power up reset detected.
  257. [   12.432647] twl_rtc twl_rtc: Enabling TWL-RTC.
  258.  
  259.  
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!