Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- U-Boot 2014.04-gea1ac32 (Nov 25 2014 - 12:09:19) Allwinner Technology
- CPU: Allwinner A20 (SUN7I)
- Board: Cubieboard2
- I2C: ready
- DRAM: 1 GiB
- MMC: SUNXI SD/MMC: 0
- In: serial
- Out: serial
- Err: serial
- Net: dwmac.1c50000
- Hit any key to stop autoboot: 0
- ** Unrecognized filesystem type **
- ** File not found boot/uEnv.txt **
- 89 bytes read in 95 ms (0 Bytes/s)
- Loaded environment from uEnv.txt
- ** Unrecognized filesystem type **
- ** File not found boot/boot.scr **
- 245 bytes read in 77 ms (2.9 KiB/s)
- Jumping to boot.scr
- ## Executing script at 44000000
- 45988 bytes read in 83 ms (541 KiB/s)
- 4209429 bytes read in 458 ms (8.8 MiB/s)
- ## Booting kernel from Legacy Image at 48000000 ...
- Image Name: linux-3.1X
- Image Type: ARM Linux Kernel Image (uncompressed)
- Data Size: 4209365 Bytes = 4 MiB
- Load Address: 40008000
- Entry Point: 40008000
- Verifying Checksum ... OK
- Loading Kernel Image ... OK
- Starting kernel ...
- Uncompressing Linux... done, booting the kernel.
- │ │ -*- Flattened Device Tree support │ │
- │ │ [*] Support for the traditional ATAGS boot data passing │ │
- │ │ [*] Provide old way to pass kernel parameters │ │
- │ │ (0) Compressed ROM boot loader base address │ │
- │ │ (0) Compressed ROM boot loader BSS address │ │
- │ │ [*] Use appended device tree blob to zImage (EXPERIMENTAL) │ │
- │ │ [*] Supplement the appended DTB with traditional ATAG information │ │
- │ │ Kernel command line type (Use bootloader kernel arguments if available) ---> │ │
- │ │ (root=/dev/mmcblk0p2 ro console=ttyS0,115200 rootwait netconsole=6666@192.168.158.191/eth0,6666@192.168.158.10/) Default kernel command string │ │
- │ │ Kernel command line type (Always use the default kernel command string) ---> │ │
- │ │ [*] Kexec system call (EXPERIMENTAL) │ │
- │ │ [*] Export atags in procfs │ │
- │ │ [*] Build kdump crash kernel (EXPERIMENTAL) │ │
- │ │ -*- Auto calculation of the decompressed kernel image address
- <6>[ 0.000000] Booting Linux on physical CPU 0x0
- <6>[ 0.000000] Initializing cgroup subsys cpuset
- <6>[ 0.000000] Initializing cgroup subsys cpu
- <6>[ 0.000000] Initializing cgroup subsys cpuacct
- <5>[ 0.000000] Linux version 3.17.4-gentoo (root@cubieboard2-1) (gcc version 4.8.3 (Gentoo Hardened 4.8.3 p1.1, pie-0.5.9) ) #2 SMP Wed Nov 26 13:56:39 CET 2014
- <6>[ 0.000000] CPU: ARMv7 Processor [410fc074] revision 4 (ARMv7), cr=10c5387d
- <6>[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
- <6>[ 0.000000] Machine model: Cubietech Cubieboard2
- <6>[ 0.000000] Memory policy: Data cache writealloc
- <7>[ 0.000000] On node 0 totalpages: 262144
- <7>[ 0.000000] free_area_init_node: node 0, pgdat c07cbf40, node_mem_map eeff8000
- <7>[ 0.000000] Normal zone: 1520 pages used for memmap
- <7>[ 0.000000] Normal zone: 0 pages reserved
- <7>[ 0.000000] Normal zone: 194560 pages, LIFO batch:31
- <7>[ 0.000000] HighMem zone: 528 pages used for memmap
- <7>[ 0.000000] HighMem zone: 67584 pages, LIFO batch:15
- <6>[ 0.000000] PERCPU: Embedded 8 pages/cpu @eefd2000 s9216 r8192 d15360 u32768
- <7>[ 0.000000] pcpu-alloc: s9216 r8192 d15360 u32768 alloc=8*4096
- <7>[ 0.000000] pcpu-alloc: [0] 0 [0] 1
- <4>[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 260624
- <5>[ 0.000000] Kernel command line: root=/dev/mmcblk0p2 ro console=ttyS0,115200 rootwait
- <6>[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
- <6>[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
- <6>[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
- <6>[ 0.000000] allocated 2097152 bytes of page_cgroup
- <6>[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
- <4>[ 0.000000] Memory: 1029096K/1048576K available (5307K kernel code, 275K rwdata, 2116K rodata, 277K init, 255K bss, 19480K reserved, 270336K highmem)
- <5>[ 0.000000] Virtual kernel memory layout:
- vector : 0xffff0000 - 0xffff1000 ( 4 kB)
- fixmap : 0xffc00000 - 0xffe00000 (2048 kB)
- vmalloc : 0xf0000000 - 0xff000000 ( 240 MB)
- lowmem : 0xc0000000 - 0xef800000 ( 760 MB)
- pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
- modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
- .text : 0xc0008000 - 0xc0747f8c (7424 kB)
- .init : 0xc0748000 - 0xc078d400 ( 277 kB)
- .data : 0xc078e000 - 0xc07d2e48 ( 276 kB)
- .bss : 0xc07d2e48 - 0xc0812b20 ( 256 kB)
- <6>[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
- <6>[ 0.000000] Hierarchical RCU implementation.
- <6>[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
- <6>[ 0.000000] Additional per-CPU info printed with stalls.
- <6>[ 0.000000] Offload RCU callbacks from all CPUs
- <6>[ 0.000000] Offload RCU callbacks from CPUs: 0-1.
- <6>[ 0.000000] NR_IRQS:16 nr_irqs:16 16
- <6>[ 0.000000] Architected cp15 timer(s) running at 24.00MHz (virt).
- <6>[ 0.000008] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 2863311519744ns
- <6>[ 0.000017] Switching to timer-based delay loop, resolution 41ns
- <6>[ 0.000321] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956969942ns
- <6>[ 0.000464] sched_clock: 32 bits at 160MHz, resolution 6ns, wraps every 26843545593ns
- <6>[ 0.000612] Console: colour dummy device 80x30
- <6>[ 0.000639] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000)
- <6>[ 0.000652] pid_max: default: 32768 minimum: 301
- <6>[ 0.000775] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
- <6>[ 0.000785] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
- <6>[ 0.001490] Initializing cgroup subsys memory
- <6>[ 0.001520] Initializing cgroup subsys devices
- <6>[ 0.001531] Initializing cgroup subsys freezer
- <6>[ 0.001540] Initializing cgroup subsys blkio
- <6>[ 0.001597] CPU: Testing write buffer coherency: ok
- <3>[ 0.001930] /cpus/cpu@0 missing clock-frequency property
- <3>[ 0.001943] /cpus/cpu@1 missing clock-frequency property
- <6>[ 0.001958] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
- <6>[ 0.002019] Setting up static identity map for 0x40534298 - 0x405342f0
- <3>[ 0.004888] CPU1: failed to boot: -38
- <6>[ 0.004920] Brought up 1 CPUs
- <6>[ 0.004926] SMP: Total of 1 processors activated.
- <6>[ 0.004929] CPU: All CPU(s) started in SVC mode.
- <6>[ 0.005564] devtmpfs: initialized
- <6>[ 0.009432] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 4
- <6>[ 0.009872] xor: measuring software checksum speed
- <6>[ 0.110005] arm4regs : 1328.000 MB/sec
- <6>[ 0.210064] 8regs : 820.800 MB/sec
- <6>[ 0.310121] 32regs : 688.000 MB/sec
- <6>[ 0.410178] neon : 1239.200 MB/sec
- <6>[ 0.410184] xor: using function: arm4regs (1328.000 MB/sec)
- <6>[ 0.410213] pinctrl core: initialized pinctrl subsystem
- <6>[ 0.410594] regulator-dummy: no parameters
- <6>[ 0.415801] NET: Registered protocol family 16
- <6>[ 0.416104] DMA: preallocated 256 KiB pool for atomic coherent allocations
- <6>[ 0.416636] cpuidle: using governor ladder
- <6>[ 0.416648] cpuidle: using governor menu
- <6>[ 0.420990] No ATAGs?raid6: int32x1 142 MB/s
- <4>[ 0.760649] raid6: int32x2 168 MB/s
- <4>[ 0.930810] raid6: int32x4 192 MB/s
- <4>[ 1.100985] raid6: int32x8 182 MB/s
- <4>[ 1.270921] raid6: neonx1 459 MB/s
- <4>[ 1.440944] raid6: neonx2 607 MB/s
- <4>[ 1.611015] raid6: neonx4 741 MB/s
- <4>[ 1.781190] raid6: neonx8 676 MB/s
- <4>[ 1.781195] raid6: using algorithm neonx4 (741 MB/s)
- <4>[ 1.781199] raid6: using intx1 recovery algorithm
- <6>[ 1.781469] reg-fixed-voltage ahci-5v: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/ahci_pwr_pin@0, deferring probe
- <6>[ 1.781492] platform ahci-5v: Driver reg-fixed-voltage requests probe deferral
- <6>[ 1.781517] reg-fixed-voltage usb1-vbus: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/usb1_vbus_pin@0, deferring probe
- <6>[ 1.781528] platform usb1-vbus: Driver reg-fixed-voltage requests probe deferral
- <6>[ 1.781547] reg-fixed-voltage usb2-vbus: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/usb2_vbus_pin@0, deferring probe
- <6>[ 1.781558] platform usb2-vbus: Driver reg-fixed-voltage requests probe deferral
- <6>[ 1.781778] vcc3v0: 3000 mV
- <6>[ 1.782017] vcc3v3: 3300 mV
- <5>[ 1.782493] SCSI subsystem initialized
- <7>[ 1.782570] libata version 3.00 loaded.
- <6>[ 1.782877] pps_core: LinuxPPS API ver. 1 registered
- <6>[ 1.782883] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
- <6>[ 1.782911] PTP clock support registered
- <6>[ 1.783986] Switched to clocksource arch_sys_counter
- <6>[ 1.794418] NET: Registered protocol family 2
- <6>[ 1.795253] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
- <6>[ 1.795339] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
- <6>[ 1.795459] TCP: Hash tables configured (established 8192 bind 8192)
- <6>[ 1.795536] TCP: reno registered
- <6>[ 1.795552] UDP hash table entries: 512 (order: 2, 16384 bytes)
- <6>[ 1.795603] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
- <6>[ 1.795863] NET: Registered protocol family 1
- <6>[ 1.800188] futex hash table entries: 512 (order: 3, 32768 bytes)
- <6>[ 1.812125] fuse init (API version 7.23)
- <6>[ 1.812850] msgmni has been set to 1481
- <6>[ 1.824411] alg: No test for crc32 (crc32-table)
- <6>[ 1.824949] alg: No test for lz4 (lz4-generic)
- <6>[ 1.825063] alg: No test for lz4hc (lz4hc-generic)
- <6>[ 1.825177] alg: No test for stdrng (krng)
- <6>[ 1.864098] NET: Registered protocol family 38
- <5>[ 1.864132] Key type asymmetric registered
- <5>[ 1.864143] Asymmetric key parser 'x509' registered
- <6>[ 1.864239] bounce: pool size: 64 pages
- <6>[ 1.864529] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
- <6>[ 1.864546] io scheduler noop registered
- <6>[ 1.864554] io scheduler deadline registered
- <6>[ 1.864798] io scheduler cfq registered (default)
- <6>[ 1.866762] sun7i-a20-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver
- <6>[ 1.868546] Serial: 8250/16550 driver, 8 ports, IRQ sharing enabled
- <6>[ 1.871350] platform 1c18000.sata: Driver ahci-sunxi requests probe deferral
- <6>[ 1.872210] tun: Universal TUN/TAP device driver, 1.6
- <6>[ 1.872217] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
- <6>[ 1.872970] stmmaceth 1c50000.ethernet: no regulator found
- <6>[ 1.873024] stmmaceth 1c50000.ethernet: no reset control found
- <6>[ 1.873031] Ring mode enabled
- <6>[ 1.873036] No HW DMA feature register supported
- <6>[ 1.873042] Normal descriptors
- <6>[ 1.873045] TX Checksum insertion supported
- <6>[ 1.877272] libphy: stmmac: probed
- <6>[ 1.877289] eth0: PHY ID 00008201 at 1 IRQ POLL (stmmac-0:01) active
- <6>[ 1.878026] sunxi-rtc 1c20d00.rtc: rtc core: registered rtc-sunxi as rtc0
- <6>[ 1.878038] sunxi-rtc 1c20d00.rtc: RTC enabled
- <6>[ 1.878137] i2c /dev entries driver
- <6>[ 1.878664] sunxi-wdt 1c20c90.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0)
- <6>[ 1.879268] sunxi-mmc 1c0f000.mmc: No vqmmc regulator found
- <6>[ 1.879625] sunxi-mmc 1c0f000.mmc: Got CD GPIO #225.
- <6>[ 1.914171] sunxi-mmc 1c0f000.mmc: base:0xf0138000 irq:64
- <6>[ 1.914359] ledtrig-cpu: registered to indicate activity on CPUs
- <6>[ 1.915116] Netfilter messages via NETLINK v0.30.
- <6>[ 1.915136] nfnl_acct: registering with nfnetlink.
- <6>[ 1.915204] nf_conntrack version 0.5.0 (16079 buckets, 64316 max)
- <6>[ 1.916034] ipip: IPv4 over IPv4 tunneling driver
- <6>[ 1.916925] ip_tables: (C) 2000-2006 Netfilter Core Team
- <6>[ 1.917005] TCP: bic registered
- <6>[ 1.917018] TCP: cubic registered
- <6>[ 1.917028] TCP: westwood registered
- <6>[ 1.917038] TCP: highspeed registered
- <6>[ 1.917047] TCP: hybla registered
- <6>[ 1.917057] TCP: htcp registered
- <6>[ 1.917067] TCP: vegas registered
- <6>[ 1.917076] TCP: veno registered
- <6>[ 1.917086] TCP: scalable registered
- <6>[ 1.917096] TCP: lp registered
- <6>[ 1.917106] TCP: yeah registered
- <6>[ 1.917116] TCP: illinois registered
- <6>[ 1.917143] Initializing XFRM netlink socket
- <6>[ 1.918068] NET: Registered protocol family 10
- <6>[ 1.919400] ip6_tables: (C) 2000-2006 Netfilter Core Team
- <6>[ 1.919611] NET: Registered protocol family 17
- <6>[ 1.919651] NET: Registered protocol family 15
- <6>[ 1.919735] 8021q: 802.1Q VLAN Support v1.8
- <5>[ 1.919803] Key type dns_resolver registered
- <5>[ 1.919917] Registering SWP/SWPB emulation handler
- <6>[ 1.920678] registered taskstats version 1
- <6>[ 1.926778] Btrfs loaded
- <6>[ 1.927636] ahci-5v: 5000 mV
- <6>[ 1.928050] usb1-vbus: 5000 mV
- <6>[ 1.928405] usb2-vbus: 5000 mV
- <4>[ 1.984916] mmc0: host does not support reading read-only switch. assuming write-enable.
- <6>[ 1.989623] mmc0: new high speed SDHC card at address e624
- <6>[ 1.990128] mmcblk0: mmc0:e624 SU04G 3.69 GiB
- <6>[ 1.992035] mmcblk0: p1 p2
- <6>[ 1.994033] ahci-sunxi 1c18000.sata: controller can't do PMP, turning off CAP_PMP
- <4>[ 1.994051] ahci-sunxi 1c18000.sata: forcing PORTS_IMPL to 0x1
- <6>[ 1.994112] ahci-sunxi 1c18000.sata: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl platform mode
- <6>[ 1.994126] ahci-sunxi 1c18000.sata: flags: ncq sntf pm led clo only pio slum part ccc
- <6>[ 1.995076] scsi host0: ahci_platform
- <6>[ 1.995449] ata1: SATA max UDMA/133 mmio [mem 0x01c18000-0x01c18fff] port 0x100 irq 88
- <6>[ 1.995669] console [netcon0] enabled
- <6>[ 1.995675] netconsole: network logging started
- <6>[ 1.995808] sunxi-rtc 1c20d00.rtc: setting system clock to 2014-11-26 15:12:38 UTC (1417014758)
- <6>[ 1.999676] usb2-vbus: disabling
- <6>[ 1.999695] usb1-vbus: disabling
- <6>[ 1.999703] vcc3v0: disabling
- <3>[ 1.999937] Warning: unable to open an initial console.
- <6>[ 6.543942] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
- <6>[ 6.549841] ata1.00: ATA-8: SAMSUNG HM501II, 2AJ10001, max UDMA/133
- <6>[ 6.549852] ata1.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32)
- <6>[ 6.555763] ata1.00: configured for UDMA/133
- <5>[ 6.556203] scsi 0:0:0:0: Direct-Access ATA SAMSUNG HM501II 0001 PQ: 0 ANSI: 5
- <5>[ 6.557604] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
- <5>[ 6.557880] sd 0:0:0:0: [sda] Write Protect is off
- <7>[ 6.557893] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
- <5>[ 6.558002] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- <6>[ 6.598057] sda: sda1
- <5>[ 6.599464] sd 0:0:0:0: [sda] Attached SCSI disk
- <6>[ 6.611633] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
- <6>[ 6.611698] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
- <6>[ 6.612921] devtmpfs: mounted
- <6>[ 6.613243] Freeing unused kernel memory: 276K (c0748000 - c078d000)
- <7>[ 8.922520] systemd-udevd[305]: starting version 216
- <5>[ 8.933231] random: systemd-udevd urandom read with 54 bits of entropy available
- <6>[ 10.212544] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
- <5>[ 10.944683] random: nonblocking pool is initialized
- <6>[ 12.327133] eth0: device MAC address 02:95:06:c1:3f:66
- <4>[ 12.414674] RX IPC Checksum Offload disabled
- <6>[ 12.414686] No MAC Management Counters available
- <6>[ 14.404288] stmmaceth 1c50000.ethernet eth0: Link is Up - 100Mbps/Full - flow control rx/tx
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement