Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- ; avoid_crossing_perimeters = 1
- ; bed_temperature = 0
- ; before_layer_gcode =
- ; bridge_acceleration = 500
- ; bridge_fan_speed = 100
- ; brim_width = 0
- ; complete_objects = 0
- ; cooling = 1
- ; default_acceleration = 1500
- ; disable_fan_first_layers = 2
- ; duplicate_distance = 6
- ; extruder_clearance_height = 20
- ; extruder_clearance_radius = 20
- ; extruder_offset = 0x0
- ; extrusion_axis = E
- ; extrusion_multiplier = 1.05
- ; fan_always_on = 0
- ; fan_below_layer_time = 90
- ; filament_diameter = 3
- ; first_layer_acceleration = 0
- ; first_layer_bed_temperature = 0
- ; first_layer_extrusion_width = 200%
- ; first_layer_speed = 30%
- ; first_layer_temperature = 195
- ; gcode_arcs = 0
- ; gcode_comments = 0
- ; gcode_flavor = reprap
- ; infill_acceleration = 3000
- ; infill_first = 0
- ; layer_gcode =
- ; max_fan_speed = 100
- ; min_fan_speed = 10
- ; min_print_speed = 15
- ; min_skirt_length = 5
- ; notes =
- ; nozzle_diameter = 0.4
- ; only_retract_when_crossing_perimeters = 1
- ; ooze_prevention = 0
- ; output_filename_format = [input_filename_base]([layer_height]).g
- ; perimeter_acceleration = 500
- ; post_process =
- ; pressure_advance = 0
- ; resolution = 0.001
- ; retract_before_travel = 2
- ; retract_layer_change = 1
- ; retract_length = 1
- ; retract_length_toolchange = 0
- ; retract_lift = 0
- ; retract_restart_extra = 0
- ; retract_restart_extra_toolchange = 0
- ; retract_speed = 15
- ; skirt_distance = 1
- ; skirt_height = 1
- ; skirts = 1
- ; slowdown_below_layer_time = 20
- ; spiral_vase = 0
- ; standby_temperature_delta = -5
- ; temperature = 190
- ; threads = 5
- ; toolchange_gcode =
- ; travel_speed = 100
- ; use_firmware_retraction = 0
- ; use_relative_e_distances = 0
- ; use_volumetric_e = 0
- ; vibration_limit = 0
- ; wipe = 0
- ; z_offset = 0
- ; dont_support_bridges = 1
- ; extrusion_width = 220%
- ; first_layer_height = 125%
- ; infill_only_where_needed = 0
- ; interface_shells = 0
- ; layer_height = 0.2
- ; raft_layers = 0
- ; seam_position = aligned
- ; support_material = 0
- ; support_material_angle = 0
- ; support_material_contact_distance = 0.2
- ; support_material_enforce_layers = 0
- ; support_material_extruder = 1
- ; support_material_extrusion_width = 0
- ; support_material_interface_extruder = 1
- ; support_material_interface_layers = 3
- ; support_material_interface_spacing = 0.3
- ; support_material_interface_speed = 100%
- ; support_material_pattern = pillars
- ; support_material_spacing = 2.5
- ; support_material_speed = 70
- ; support_material_threshold = 45
- ; xy_size_compensation = 0
- ; bottom_solid_layers = 3
- ; bridge_flow_ratio = 1.25
- ; bridge_speed = 25
- ; external_fill_pattern = rectilinear
- ; external_perimeter_extrusion_width = 0
- ; external_perimeter_speed = 70%
- ; external_perimeters_first = 0
- ; extra_perimeters = 1
- ; fill_angle = 45
- ; fill_density = 40%
- ; fill_pattern = honeycomb
- ; gap_fill_speed = 30
- ; infill_every_layers = 2
- ; infill_extruder = 1
- ; infill_extrusion_width = 0
- ; infill_overlap = 15%
- ; infill_speed = 70
- ; overhangs = 1
- ; perimeter_extruder = 1
- ; perimeter_extrusion_width = 0
- ; perimeter_speed = 60
- ; perimeters = 2
- ; small_perimeter_speed = 80%
- ; solid_infill_below_area = 50
- ; solid_infill_every_layers = 0
- ; solid_infill_extruder = 1
- ; solid_infill_extrusion_width = 0
- ; solid_infill_speed = 50%
- ; thin_walls = 0
- ; top_infill_extrusion_width = 0
- ; top_solid_infill_speed = 50%
- ; top_solid_layers = 3
Advertisement
Add Comment
Please, Sign In to add comment
