< 21:44:28: ; config override present: /sd/config-override
< 21:44:28: ;Steps per unit:
< 21:44:28: M92 X160.00000 Y160.00000 Z800.00000
< 21:44:28: ;Acceleration mm/sec^2:
< 21:44:28: M204 S3000.00000 Z1000.00000
< 21:44:28: ;X- Junction Deviation, Z- Z junction deviation, S - Minimum Planner speed mm/sec:
< 21:44:28: M205 X0.05000 Z-1.00000 S0.00000
< 21:44:28: ;Max cartesian feedrates in mm/sec:
< 21:44:28: M203 X500.00000 Y500.00000 Z166.66667
< 21:44:28: ;Max actuator feedrates in mm/sec:
< 21:44:28: M203.1 X500.00000 Y500.00000 Z125.00000
< 21:44:28: ;WCS settings
< 21:44:28: G54
< 21:44:28: ;Digipot Motor currents:
< 21:44:28: M907 X1.20000 Y1.50000 Z1.20000 A0.80000
< 21:44:28: ;Home offset (mm):
< 21:44:28: M206 X0.00 Y0.00 Z1.00
< 21:44:28: ;E Steps per mm:
< 21:44:28: M92 E800.0000 P57988
< 21:44:28: ;E Filament diameter:
< 21:44:28: M200 D0.0000 P57988
< 21:44:28: ;E retract length, feedrate:
< 21:44:28: M207 S3.0000 F2700.0000 Z0.0000 Q6000.0000 P57988
< 21:44:28: ;E retract recover length, feedrate:
< 21:44:28: M208 S0.0000 F480.0000 P57988
< 21:44:28: ;E acceleration mm/sec²:
< 21:44:28: M204 E500.0000 P57988
< 21:44:28: ;E max feed rate mm/sec:
< 21:44:28: M203 E50.0000 P57988
< 21:44:28: ;PID settings:
< 21:44:28: M301 S0 P38.9000 I2.1770 D173.0000 X255.0000 Y255
< 21:44:28: ;Max temperature setting:
< 21:44:28: M143 S0 P300.0000
< 21:44:28: ;PID settings:
< 21:44:28: M301 S1 P10.0000 I0.3000 D200.0000 X255.0000 Y255
< 21:44:28: ;Max temperature setting:
< 21:44:28: M143 S1 P300.0000
< 21:44:28: ;Probe feedrates Slow/fast(K)/Return (mm/sec) max_z (mm) height (mm):
< 21:44:28: M670 S5.00 K100.00 R0.00 Z180.00 H5.00
< 21:44:28: ;Probe points:
< 21:44:28: M557 P0 X10.00000 Y10.00000
< 21:44:28: M557 P1 X165.00000 Y275.00000
< 21:44:28: M557 P2 X10.00000 Y270.00000
< 21:44:28: ;Probe offsets:
< 21:44:28: M565 X-25.00000 Y0.00000 Z0.00000