API tools faq
paste
Advertisement
Guest User

Untitled

a guest
Dec 3rd, 2012
105
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 11.41 KB | None | 0 0
raw download clone embed print report
  1. smartctl 5.40 2010-10-16 r3189 [i686-pc-linux-gnu] (local build)
  2. Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net
  3.  
  4. === START OF INFORMATION SECTION ===
  5. Device Model: SAMSUNG HD204UI
  6. Serial Number: S2H7JX0C700519
  7. Firmware Version: 1AQ10001
  8. User Capacity: 2,000,398,934,016 bytes
  9. Device is: Not in smartctl database [for details use: -P showall]
  10. ATA Version is: 8
  11. ATA Standard is: ATA-8-ACS revision 6
  12. Local Time is: Tue Dec 4 13:21:30 2012 EST
  13. SMART support is: Available - device has SMART capability.
  14. SMART support is: Enabled
  15.  
  16. === START OF READ SMART DATA SECTION ===
  17. SMART overall-health self-assessment test result: PASSED
  18.  
  19. General SMART Values:
  20. Offline data collection status: (0x80) Offline data collection activity
  21. was never started.
  22. Auto Offline Data Collection: Enabled.
  23. Self-test execution status: ( 0) The previous self-test routine completed
  24. without error or no self-test has ever
  25. been run.
  26. Total time to complete Offline
  27. data collection: (20220) seconds.
  28. Offline data collection
  29. capabilities: (0x5b) SMART execute Offline immediate.
  30. Auto Offline data collection on/off support.
  31. Suspend Offline collection upon new
  32. command.
  33. Offline surface scan supported.
  34. Self-test supported.
  35. No Conveyance Self-test supported.
  36. Selective Self-test supported.
  37. SMART capabilities: (0x0003) Saves SMART data before entering
  38. power-saving mode.
  39. Supports SMART auto save timer.
  40. Error logging capability: (0x01) Error logging supported.
  41. General Purpose Logging supported.
  42. Short self-test routine
  43. recommended polling time: ( 2) minutes.
  44. Extended self-test routine
  45. recommended polling time: ( 255) minutes.
  46. SCT capabilities: (0x003f) SCT Status supported.
  47. SCT Error Recovery Control supported.
  48. SCT Feature Control supported.
  49. SCT Data Table supported.
  50.  
  51. SMART Attributes Data Structure revision number: 16
  52. Vendor Specific SMART Attributes with Thresholds:
  53. ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
  54. 1 Raw_Read_Error_Rate 0x002f 100 100 051 Pre-fail Always - 706
  55. 2 Throughput_Performance 0x0026 056 055 000 Old_age Always - 18408
  56. 3 Spin_Up_Time 0x0023 067 066 025 Pre-fail Always - 10302
  57. 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 413
  58. 5 Reallocated_Sector_Ct 0x0033 252 252 010 Pre-fail Always - 0
  59. 7 Seek_Error_Rate 0x002e 252 252 051 Old_age Always - 0
  60. 8 Seek_Time_Performance 0x0024 252 252 015 Old_age Offline - 0
  61. 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 2229
  62. 10 Spin_Retry_Count 0x0032 252 252 051 Old_age Always - 0
  63. 11 Calibration_Retry_Count 0x0032 252 252 000 Old_age Always - 0
  64. 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 19
  65. 170 Unknown_Attribute 0x0032 096 096 --- Old_age Always - 92780696
  66. 181 Program_Fail_Cnt_Total 0x0022 095 095 000 Old_age Always - 127891673
  67. 191 G-Sense_Error_Rate 0x0022 252 252 000 Old_age Always - 0
  68. 192 Power-Off_Retract_Count 0x0022 252 252 000 Old_age Always - 0
  69. 194 Temperature_Celsius 0x0002 064 046 000 Old_age Always - 36 (Min/Max 14/54)
  70. 195 Hardware_ECC_Recovered 0x003a 100 100 000 Old_age Always - 0
  71. 196 Reallocated_Event_Count 0x0032 252 252 000 Old_age Always - 0
  72. 197 Current_Pending_Sector 0x0032 252 100 000 Old_age Always - 0
  73. 198 Offline_Uncorrectable 0x0030 252 100 000 Old_age Offline - 0
  74. 199 UDMA_CRC_Error_Count 0x0036 200 200 000 Old_age Always - 0
  75. 200 Multi_Zone_Error_Rate 0x002a 100 100 000 Old_age Always - 19
  76. 223 Load_Retry_Count 0x0032 252 252 000 Old_age Always - 0
  77. 225 Load_Cycle_Count 0x0032 083 083 000 Old_age Always - 177147
  78.  
  79. SMART Error Log Version: 1
  80. ATA Error Count: 1758 (device log contains only the most recent five errors)
  81. CR = Command Register [HEX]
  82. FR = Features Register [HEX]
  83. SC = Sector Count Register [HEX]
  84. SN = Sector Number Register [HEX]
  85. CL = Cylinder Low Register [HEX]
  86. CH = Cylinder High Register [HEX]
  87. DH = Device/Head Register [HEX]
  88. DC = Device Command Register [HEX]
  89. ER = Error register [HEX]
  90. ST = Status register [HEX]
  91. Powered_Up_Time is measured from power on, and printed as
  92. DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
  93. SS=sec, and sss=millisec. It "wraps" after 49.710 days.
  94.  
  95. Error 1758 occurred at disk power-on lifetime: 2155 hours (89 days + 19 hours)
  96. When the command that caused the error occurred, the device was in a vendor specific state.
  97.  
  98. After command completion occurred, registers were:
  99. ER ST SC SN CL CH DH
  100. -- -- -- -- -- -- --
  101. 40 51 08 58 00 00 e0 Error: UNC 8 sectors at LBA = 0x00000058 = 88
  102.  
  103. Commands leading to the command that caused the error were:
  104. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  105. -- -- -- -- -- -- -- -- ---------------- --------------------
  106. c8 00 40 20 00 00 e0 00 00:00:03.679 READ DMA
  107. 25 00 08 a0 88 e0 e0 00 00:00:03.679 READ DMA EXT
  108. 25 00 08 00 88 e0 e0 00 00:00:03.679 READ DMA EXT
  109. c8 00 06 3a 10 a1 e0 00 00:00:03.679 READ DMA
  110. c8 00 02 38 10 a1 e0 00 00:00:03.679 READ DMA
  111.  
  112. Error 1757 occurred at disk power-on lifetime: 2127 hours (88 days + 15 hours)
  113. When the command that caused the error occurred, the device was active or idle.
  114.  
  115. After command completion occurred, registers were:
  116. ER ST SC SN CL CH DH
  117. -- -- -- -- -- -- --
  118. 40 51 08 58 00 00 e0 Error: UNC 8 sectors at LBA = 0x00000058 = 88
  119.  
  120. Commands leading to the command that caused the error were:
  121. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  122. -- -- -- -- -- -- -- -- ---------------- --------------------
  123. c8 00 40 20 00 00 e0 00 00:00:00.123 READ DMA
  124. 25 00 08 a0 88 e0 e0 00 00:00:00.123 READ DMA EXT
  125. 25 00 08 00 88 e0 e0 00 00:00:00.123 READ DMA EXT
  126. 25 00 10 60 b9 15 e0 00 00:00:00.123 READ DMA EXT
  127. 25 00 20 40 b9 15 e0 00 00:00:00.123 READ DMA EXT
  128.  
  129. Error 1756 occurred at disk power-on lifetime: 2126 hours (88 days + 14 hours)
  130. When the command that caused the error occurred, the device was active or idle.
  131.  
  132. After command completion occurred, registers were:
  133. ER ST SC SN CL CH DH
  134. -- -- -- -- -- -- --
  135. 40 51 08 58 00 00 e0 Error: UNC 8 sectors at LBA = 0x00000058 = 88
  136.  
  137. Commands leading to the command that caused the error were:
  138. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  139. -- -- -- -- -- -- -- -- ---------------- --------------------
  140. c8 00 40 20 00 00 e0 00 00:00:00.179 READ DMA
  141. 25 00 08 a0 88 e0 e0 00 00:00:00.179 READ DMA EXT
  142. 25 00 08 00 88 e0 e0 00 00:00:00.179 READ DMA EXT
  143. 25 00 10 60 80 11 e0 00 00:00:00.179 READ DMA EXT
  144. 25 00 18 88 7d 11 e0 00 00:00:00.179 READ DMA EXT
  145.  
  146. Error 1755 occurred at disk power-on lifetime: 2030 hours (84 days + 14 hours)
  147. When the command that caused the error occurred, the device was active or idle.
  148.  
  149. After command completion occurred, registers were:
  150. ER ST SC SN CL CH DH
  151. -- -- -- -- -- -- --
  152. 40 51 38 58 00 00 e0 Error: UNC 56 sectors at LBA = 0x00000058 = 88
  153.  
  154. Commands leading to the command that caused the error were:
  155. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  156. -- -- -- -- -- -- -- -- ---------------- --------------------
  157. c8 00 70 20 00 00 e0 00 00:40:00.163 READ DMA
  158. c8 00 08 20 08 00 e0 00 00:40:00.163 READ DMA
  159. c8 00 08 00 0a 00 e0 00 00:40:00.163 READ DMA
  160. c8 00 08 40 08 00 e0 00 00:40:00.163 READ DMA
  161. c8 00 08 80 08 00 e0 00 00:40:00.163 READ DMA
  162.  
  163. Error 1754 occurred at disk power-on lifetime: 1854 hours (77 days + 6 hours)
  164. When the command that caused the error occurred, the device was active or idle.
  165.  
  166. After command completion occurred, registers were:
  167. ER ST SC SN CL CH DH
  168. -- -- -- -- -- -- --
  169. 40 51 08 58 00 00 e0 Error: UNC 8 sectors at LBA = 0x00000058 = 88
  170.  
  171. Commands leading to the command that caused the error were:
  172. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  173. -- -- -- -- -- -- -- -- ---------------- --------------------
  174. c8 00 40 20 00 00 e0 00 00:29:28.979 READ DMA
  175. 25 00 08 a0 88 e0 e0 00 00:29:28.979 READ DMA EXT
  176. 25 00 08 00 88 e0 e0 00 00:29:28.979 READ DMA EXT
  177. 25 00 08 70 87 e0 e0 00 00:29:28.979 READ DMA EXT
  178. 25 00 08 e8 85 e0 e0 00 00:29:28.979 READ DMA EXT
  179.  
  180. SMART Self-test log structure revision number 1
  181. Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
  182. # 1 Short offline Completed without error 00% 2228 -
  183. # 2 Extended offline Completed without error 00% 2227 -
  184. # 3 Short offline Aborted by host 90% 2203 -
  185. # 4 Short offline Completed without error 00% 2203 -
  186. # 5 Short offline Completed: read failure 90% 2194 88
  187. # 6 Short offline Completed: read failure 90% 2170 88
  188. # 7 Short offline Completed: read failure 90% 2147 88
  189. # 8 Extended offline Completed: read failure 90% 1819 88
  190. # 9 Short offline Completed: read failure 90% 1793 88
  191. #10 Short offline Completed: read failure 90% 1688 88
  192. #11 Short offline Completed: read failure 90% 1672 88
  193. #12 Short offline Completed: read failure 90% 1340 88
  194. #13 Short offline Completed: read failure 90% 1316 88
  195. #14 Extended offline Completed: read failure 90% 1292 88
  196. #15 Short offline Completed: read failure 90% 1245 88
  197. #16 Short offline Completed: read failure 90% 1229 88
  198. #17 Short offline Completed: read failure 90% 1213 88
  199. #18 Short offline Completed: read failure 90% 1198 88
  200. #19 Short offline Completed: read failure 90% 1177 88
  201. #20 Extended offline Completed: read failure 90% 1161 88
  202. #21 Short offline Completed: read failure 90% 1145 88
  203.  
  204. Note: selective self-test log revision number (0) not 1 implies that no selective self-test has ever been run
  205. SMART Selective self-test log data structure revision number 0
  206. Note: revision number not 1 implies that no selective self-test has ever been run
  207. SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
  208. 1 0 0 Completed [00% left] (0-65535)
  209. 2 0 0 Not_testing
  210. 3 0 0 Not_testing
  211. 4 0 0 Not_testing
  212. 5 0 0 Not_testing
  213. Selective self-test flags (0x0):
  214. After scanning selected spans, do NOT read-scan remainder of disk.
  215. If Selective self-test is pending on power-up, resume after 0 minute delay.
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!