API tools faq
paste
Advertisement
Guest User

dmesg

a guest
May 22nd, 2014
195
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 13.20 KB | None | 0 0
raw download clone embed print report
  1. [ 0.000000] Linux version 3.3.8 (sebkinne@WorstationMeltdown) (gcc version 4.6.3 20120201 (prerelease) (Linaro GCC 4.6-2012.02) ) #20 Mon May 19 23:27:51 CEST 2014
  2. [ 0.000000] MyLoader: sysp=97d936c9, boardp=61b798de, parts=6238a85e
  3. [ 0.000000] bootconsole [early0] enabled
  4. [ 0.000000] CPU revision is: 00019374 (MIPS 24Kc)
  5. [ 0.000000] SoC: Atheros AR9330 rev 1
  6. [ 0.000000] Clocks: CPU:400.000MHz, DDR:400.000MHz, AHB:200.000MHz, Ref:25.000MHz
  7. [ 0.000000] Determined physical RAM map:
  8. [ 0.000000] memory: 04000000 @ 00000000 (usable)
  9. [ 0.000000] Initrd not found or empty - disabling initrd
  10. [ 0.000000] Zone PFN ranges:
  11. [ 0.000000] Normal 0x00000000 -> 0x00004000
  12. [ 0.000000] Movable zone start PFN for each node
  13. [ 0.000000] Early memory PFN ranges
  14. [ 0.000000] 0: 0x00000000 -> 0x00004000
  15. [ 0.000000] On node 0 totalpages: 16384
  16. [ 0.000000] free_area_init_node: node 0, pgdat 802d8470, node_mem_map 81000000
  17. [ 0.000000] Normal zone: 128 pages used for memmap
  18. [ 0.000000] Normal zone: 0 pages reserved
  19. [ 0.000000] Normal zone: 16256 pages, LIFO batch:3
  20. [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
  21. [ 0.000000] pcpu-alloc: [0] 0
  22. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 16256
  23. [ 0.000000] Kernel command line: board=MK5 console=ttyATH0,115200 rootfstype=squashfs,jffs2 noinitrd
  24. [ 0.000000] PID hash table entries: 256 (order: -2, 1024 bytes)
  25. [ 0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
  26. [ 0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
  27. [ 0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
  28. [ 0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
  29. [ 0.000000] Writing ErrCtl register=00000000
  30. [ 0.000000] Readback ErrCtl register=00000000
  31. [ 0.000000] Memory: 61592k/65536k available (2124k kernel code, 3944k reserved, 406k data, 212k init, 0k highmem)
  32. [ 0.000000] SLUB: Genslabs=9, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
  33. [ 0.000000] NR_IRQS:51
  34. [ 0.000000] Calibrating delay loop... 265.42 BogoMIPS (lpj=1327104)
  35. [ 0.080000] pid_max: default: 32768 minimum: 301
  36. [ 0.080000] Mount-cache hash table entries: 512
  37. [ 0.090000] NET: Registered protocol family 16
  38. [ 0.090000] gpiochip_add: registered GPIOs 0 to 29 on device: ath79
  39. [ 0.100000] MIPS: machine is MK5 V1.0
  40. [ 0.350000] bio: create slab <bio-0> at 0
  41. [ 0.360000] Switching to clocksource MIPS
  42. [ 0.360000] NET: Registered protocol family 2
  43. [ 0.370000] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
  44. [ 0.370000] TCP established hash table entries: 2048 (order: 2, 16384 bytes)
  45. [ 0.370000] TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
  46. [ 0.380000] TCP: Hash tables configured (established 2048 bind 2048)
  47. [ 0.390000] TCP reno registered
  48. [ 0.390000] UDP hash table entries: 256 (order: 0, 4096 bytes)
  49. [ 0.400000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
  50. [ 0.400000] NET: Registered protocol family 1
  51. [ 0.410000] PCI: CLS 0 bytes, default 32
  52. [ 0.430000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  53. [ 0.430000] JFFS2 version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
  54. [ 0.440000] msgmni has been set to 120
  55. [ 0.440000] io scheduler noop registered
  56. [ 0.450000] io scheduler deadline registered (default)
  57. [ 0.450000] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
  58. [ 0.460000] ar933x-uart: ttyATH0 at MMIO 0x18020000 (irq = 11) is a AR933X UART
  59. [ 0.470000] console [ttyATH0] enabled, bootconsole disabled
  60. [ 0.480000] m25p80 spi0.0: found w25q128, expected m25p80
  61. [ 0.480000] m25p80 spi0.0: w25q128 (16384 Kbytes)
  62. [ 0.490000] 5 tp-link partitions found on MTD device spi0.0
  63. [ 0.490000] Creating 5 MTD partitions on "spi0.0":
  64. [ 0.500000] 0x000000000000-0x000000020000 : "u-boot"
  65. [ 0.510000] 0x000000020000-0x000000102788 : "kernel"
  66. [ 0.510000] mtd: partition "kernel" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
  67. [ 0.520000] 0x000000102788-0x000000ff0000 : "rootfs"
  68. [ 0.530000] mtd: partition "rootfs" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
  69. [ 0.540000] mtd: partition "rootfs" set to be root filesystem
  70. [ 0.550000] mtd: partition "rootfs_data" created automatically, ofs=C20000, len=3D0000
  71. [ 0.550000] 0x000000c20000-0x000000ff0000 : "rootfs_data"
  72. [ 0.560000] 0x000000ff0000-0x000001000000 : "art"
  73. [ 0.570000] 0x000000020000-0x000000ff0000 : "firmware"
  74. [ 0.590000] ag71xx_mdio: probed
  75. [ 0.590000] eth0: Atheros AG71xx at 0xb9000000, irq 4
  76. [ 1.150000] ag71xx ag71xx.0: eth0: connected to PHY at ag71xx-mdio.1:04 [uid=004dd041, driver=Generic PHY]
  77. [ 1.160000] TCP cubic registered
  78. [ 1.160000] NET: Registered protocol family 17
  79. [ 1.160000] Bridge firewalling registered
  80. [ 1.170000] 8021q: 802.1Q VLAN Support v1.8
  81. [ 1.180000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
  82. [ 1.180000] Freeing unused kernel memory: 212k freed
  83. [ 3.540000] Registered led device: mk5:red:wlan1
  84. [ 3.540000] Registered led device: mk5:blue:wlan0
  85. [ 3.540000] Registered led device: mk5:amber:lan
  86. [ 6.150000] eth0: link up (100Mbps/Full duplex)
  87. [ 6.850000] JFFS2 notice: (421) jffs2_build_xattr_subsystem: complete building xattr subsystem, 3 of xdatum (1 unchecked, 2 orphan) and 24 of xref (0 dead, 9 orphan) found.
  88. [ 7.850000] SCSI subsystem initialized
  89. [ 8.140000] usbcore: registered new interface driver usbfs
  90. [ 8.150000] usbcore: registered new interface driver hub
  91. [ 8.150000] usbcore: registered new device driver usb
  92. [ 8.660000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  93. [ 8.660000] ehci-platform ehci-platform: Generic Platform EHCI Controller
  94. [ 8.670000] ehci-platform ehci-platform: new USB bus registered, assigned bus number 1
  95. [ 8.710000] ehci-platform ehci-platform: irq 3, io mem 0x1b000000
  96. [ 8.730000] ehci-platform ehci-platform: USB 2.0 started, EHCI 1.00
  97. [ 8.730000] hub 1-0:1.0: USB hub found
  98. [ 8.730000] hub 1-0:1.0: 1 port detected
  99. [ 8.850000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  100. [ 8.980000] uhci_hcd: USB Universal Host Controller Interface driver
  101. [ 9.090000] Initializing USB Mass Storage driver...
  102. [ 9.100000] usbcore: registered new interface driver usb-storage
  103. [ 9.100000] USB Mass Storage support registered.
  104. [ 9.210000] usb 1-1: new high-speed USB device number 2 using ehci-platform
  105. [ 9.360000] hub 1-1:1.0: USB hub found
  106. [ 9.360000] hub 1-1:1.0: 4 ports detected
  107. [ 9.640000] usb 1-1.1: new high-speed USB device number 3 using ehci-platform
  108. [ 9.880000] usb 1-1.4: new high-speed USB device number 4 using ehci-platform
  109. [ 10.010000] scsi0 : usb-storage 1-1.4:1.0
  110. [ 11.010000] scsi 0:0:0:0: Direct-Access Multi Flash Reader 1.00 PQ: 0 ANSI: 0
  111. [ 11.600000] sd 0:0:0:0: [sda] 15523840 512-byte logical blocks: (7.94 GB/7.40 GiB)
  112. [ 11.610000] sd 0:0:0:0: [sda] Write Protect is off
  113. [ 11.610000] sd 0:0:0:0: [sda] Mode Sense: 03 00 00 00
  114. [ 11.610000] sd 0:0:0:0: [sda] No Caching mode page present
  115. [ 11.620000] sd 0:0:0:0: [sda] Assuming drive cache: write through
  116. [ 11.630000] sd 0:0:0:0: [sda] No Caching mode page present
  117. [ 11.630000] sd 0:0:0:0: [sda] Assuming drive cache: write through
  118. [ 11.640000] sda: sda1 sda2
  119. [ 11.650000] sd 0:0:0:0: [sda] No Caching mode page present
  120. [ 11.660000] sd 0:0:0:0: [sda] Assuming drive cache: write through
  121. [ 11.660000] sd 0:0:0:0: [sda] Attached SCSI removable disk
  122. [ 29.520000] eth0: link down
  123. [ 30.470000] Loading modules backported from Linux version master-2014-01-23-0-g62c147d
  124. [ 30.480000] Backport generated by backports.git backports-20140124-0-g1256d3e
  125. [ 30.520000] cfg80211: Calling CRDA to update world regulatory domain
  126. [ 30.530000] cfg80211: World regulatory domain updated:
  127. [ 30.530000] cfg80211: DFS Master region: unset
  128. [ 30.540000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
  129. [ 30.540000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  130. [ 30.550000] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  131. [ 30.560000] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
  132. [ 30.570000] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (300 mBi, 2000 mBm)
  133. [ 30.580000] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (300 mBi, 2000 mBm)
  134. [ 30.580000] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm)
  135. [ 32.300000] usbcore: registered new interface driver rt73usb
  136. [ 32.360000] ath: phy0: Enable LNA combining
  137. [ 32.360000] ath: EEPROM regdomain: 0x0
  138. [ 32.360000] ath: EEPROM indicates default country code should be used
  139. [ 32.360000] ath: doing EEPROM country->regdmn map search
  140. [ 32.360000] ath: country maps to regdmn code: 0x3a
  141. [ 32.360000] ath: Country alpha2 being used: US
  142. [ 32.360000] ath: Regpair used: 0x3a
  143. [ 32.370000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
  144. [ 32.380000] Registered led device: ath9k-phy0
  145. [ 32.380000] ieee80211 phy0: Atheros AR9330 Rev:1 mem=0xb8100000, irq=2
  146. [ 32.410000] cfg80211: Calling CRDA for country: US
  147. [ 32.410000] cfg80211: Regulatory domain changed to country: US
  148. [ 32.420000] cfg80211: DFS Master region: FCC
  149. [ 32.420000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
  150. [ 32.430000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
  151. [ 32.440000] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (300 mBi, 1700 mBm)
  152. [ 32.450000] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (300 mBi, 2400 mBm)
  153. [ 32.450000] cfg80211: (5490000 KHz - 5600000 KHz @ 80000 KHz), (300 mBi, 2400 mBm)
  154. [ 32.460000] cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2400 mBm)
  155. [ 32.470000] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (300 mBi, 3000 mBm)
  156. [ 32.480000] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm)
  157. [ 32.750000] ieee80211 phy1: Selected rate control algorithm 'minstrel_ht'
  158. [ 32.750000] ieee80211 phy1: hwaddr 00:13:37:93:52:16, RTL8187vB (default) V1 + rtl8225z2, rfkill mask 2
  159. [ 32.780000] rtl8187: Customer ID is 0x46
  160. [ 32.780000] Registered led device: rtl8187-phy1::radio
  161. [ 32.780000] Registered led device: rtl8187-phy1::tx
  162. [ 32.780000] Registered led device: rtl8187-phy1::rx
  163. [ 32.780000] rtl8187: wireless switch is on
  164. [ 32.790000] usbcore: registered new interface driver rtl8187
  165. [ 32.870000] Button Hotplug driver version 0.4.1
  166. [ 33.080000] RPC: Registered named UNIX socket transport module.
  167. [ 33.090000] RPC: Registered udp transport module.
  168. [ 33.090000] RPC: Registered tcp transport module.
  169. [ 33.090000] RPC: Registered tcp NFSv4.1 backchannel transport module.
  170. [ 33.360000] PPP generic driver version 2.4.2
  171. [ 33.500000] usbcore: registered new interface driver rt2800usb
  172. [ 33.630000] tun: Universal TUN/TAP device driver, 1.6
  173. [ 33.640000] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
  174. [ 33.900000] ip_tables: (C) 2000-2006 Netfilter Core Team
  175. [ 34.120000] NET: Registered protocol family 24
  176. [ 34.260000] nf_conntrack version 0.5.0 (965 buckets, 3860 max)
  177. [ 34.970000] xt_time: kernel timezone is -0000
  178. [ 35.480000] usbcore: registered new interface driver ath9k_htc
  179. [ 35.710000] usbcore: registered new interface driver usbserial
  180. [ 35.720000] USB Serial support registered for generic
  181. [ 35.720000] usbcore: registered new interface driver usbserial_generic
  182. [ 35.730000] usbserial: USB Serial Driver core
  183. [ 35.870000] usbcore: registered new interface driver asix
  184. [ 35.930000] usbcore: registered new interface driver cdc_ether
  185. [ 36.050000] Error: Driver 'gpio-keys-polled' is already registered, aborting...
  186. [ 36.160000] usbcore: registered new interface driver rndis_host
  187. [ 36.220000] sd 0:0:0:0: Attached scsi generic sg0 type 0
  188. [ 36.340000] USB Serial support registered for pl2303
  189. [ 36.340000] usbcore: registered new interface driver pl2303
  190. [ 36.350000] pl2303: Prolific PL2303 USB to serial adaptor driver
  191. [ 45.890000] device eth0 entered promiscuous mode
  192. [ 46.470000] eth0: link up (100Mbps/Full duplex)
  193. [ 46.470000] br-lan: port 1(eth0) entered forwarding state
  194. [ 46.480000] br-lan: port 1(eth0) entered forwarding state
  195. [ 48.480000] br-lan: port 1(eth0) entered forwarding state
  196. [ 48.560000] EXT4-fs (sda1): couldn't mount as ext3 due to feature incompatibilities
  197. [ 48.570000] EXT4-fs (sda1): couldn't mount as ext2 due to feature incompatibilities
  198. [ 49.110000] EXT4-fs (sda1): recovery complete
  199. [ 49.120000] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
  200. [ 50.810000] Adding 1000340k swap on /dev/sda2. Priority:-1 extents:1 across:1000340k
  201. [ 51.940000] device wlan0 entered promiscuous mode
  202. [ 51.950000] br-lan: port 2(wlan0) entered forwarding state
  203. [ 51.960000] br-lan: port 2(wlan0) entered forwarding state
  204. [ 53.960000] br-lan: port 2(wlan0) entered forwarding state
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!