API tools faq
paste
Advertisement
Guest User

BB rec C4 boot process

a guest
Mar 11th, 2010
239
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 21.75 KB | None | 0 0
raw download clone embed print report
  1. Texas Instruments X-Loader 1.4.2 (Feb 19 2009 - 12:01:24)
  2. Reading boot sector
  3. Loading u-boot.bin from nand
  4.  
  5.  
  6. U-Boot 2009.11-rc1-00601-g3aa4b51 (Jan 05 2010 - 20:56:38)
  7.  
  8. OMAP3530-GP ES3.1, CPU-OPP2 L3-165MHz
  9. OMAP3 Beagle board + LPDDR/NAND
  10. I2C: ready
  11. DRAM: 256 MB
  12. NAND: 256 MiB
  13. In: serial
  14. Out: serial
  15. Err: serial
  16. Board revision C4
  17. Die ID #1a4c000400000000040365fa17025013
  18. Hit any key to stop autoboot: 0
  19. mmc1 is available
  20. reading uImage
  21.  
  22. 3284184 bytes read
  23. ## Booting kernel from Legacy Image at 80300000 ...
  24. Image Name: Linux
  25. Image Type: ARM Linux Kernel Image (uncompressed)
  26. Data Size: 3284120 Bytes = 3.1 MB
  27. Load Address: 80008000
  28. Entry Point: 80008000
  29. Verifying Checksum ... OK
  30. Loading Kernel Image ... OK
  31. OK
  32.  
  33. Starting kernel ...
  34.  
  35. Uncompressing Linux.............................................................
  36. [ 0.000000] Linux version 2.6.31.6-x6.0 (root@beagle-128mb-0) (gcc version 49
  37. [ 0.000000] CPU: ARMv7 Processor [411fc083] revision 3 (ARMv7), cr=10c53c7f
  38. [ 0.000000] CPU: VIPT nonaliasing data cache, VIPT nonaliasing instruction ce
  39. [ 0.000000] Machine: OMAP3 Beagle Board
  40. [ 0.000000] Memory policy: ECC disabled, Data cache writeback
  41. [ 0.000000] OMAP3430 ES3.1
  42. [ 0.000000] SRAM: Mapped pa 0x40200000 to va 0xe3000000 size: 0x100000
  43. [ 0.000000] Reserving 14680064 bytes SDRAM for VRAM
  44. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pa4
  45. [ 0.000000] Kernel command line: console=ttyS2,115200n8 console=tty0 root=/d0
  46. [ 0.000000] PID hash table entries: 1024 (order: 10, 4096 bytes)
  47. [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
  48. [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
  49. [ 0.000000] Memory: 128MB 128MB = 256MB total
  50. [ 0.000000] Memory: 238336KB available (5940K code, 669K data, 188K init, 0K)
  51. [ 0.000000] NR_IRQS:402
  52. [ 0.000000] Clocking rate (Crystal/Core/MPU): 26.0/332/720 MHz
  53. [ 0.000000] Reprogramming SDRC clock to 332000000 Hz
  54. [ 0.000000] GPMC revision 5.0
  55. [ 0.000000] IRQ: Found an INTC at 0xd8200000 (revision 4.0) with 96 interrups
  56. [ 0.000000] Total of 96 interrupts on 1 active controller
  57. [ 0.000000] OMAP34xx GPIO hardware version 2.5
  58. [ 0.000000] OMAP clockevent source: GPTIMER12 at 32768 Hz
  59. [ 0.000000] Console: colour dummy device 80x30
  60. [ 0.000000] console [tty0] enabled
  61. [ 0.000000] Calibrating delay loop... 742.58 BogoMIPS (lpj=2899968)
  62. [ 0.000000] Mount-cache hash table entries: 512
  63. [ 0.000000] CPU: Testing write buffer coherency: ok
  64. [ 0.000000] regulator: core version 0.5
  65. [ 0.000000] NET: Registered protocol family 16
  66. [ 0.000000] Found NAND on CS0
  67. [ 0.000000] Registering NAND on CS0
  68. [ 0.000000] OMAP DMA hardware revision 4.0
  69. [ 0.000000] bio: create slab <bio-0> at 0
  70. [ 0.000000] i2c_omap i2c_omap.1: bus 1 rev3.12 at 2600 kHz
  71. [ 0.000000] twl4030: PIH (irq 7) chaining IRQs 368..375
  72. [ 0.000000] twl4030: power (irq 373) chaining IRQs 376..383
  73. [ 0.000000] twl4030: gpio (irq 368) chaining IRQs 384..401
  74. [ 0.000000] regulator: VMMC1: 1850 <--> 3150 mV normal standby
  75. [ 0.000000] regulator: VDAC: 1800 mV normal standby
  76. [ 0.000000] regulator: VUSB1V5: 1500 mV normal standby
  77. [ 0.000000] regulator: VUSB1V8: 1800 mV normal standby
  78. [ 0.000000] regulator: VUSB3V1: 3100 mV normal standby
  79. [ 0.000000] regulator: VPLL2: 1800 mV normal standby
  80. [ 0.000000] regulator: VSIM: 1800 <--> 3000 mV normal standby
  81. [ 0.000000] i2c_omap i2c_omap.3: bus 3 rev3.12 at 100 kHz
  82. [ 0.000000] SCSI subsystem initialized
  83. [ 0.000000] twl4030_usb twl4030_usb: Initialized TWL4030 USB module
  84. [ 0.000000] usbcore: registered new interface driver usbfs
  85. [ 0.000000] usbcore: registered new interface driver hub
  86. [ 0.000000] usbcore: registered new device driver usb
  87. [ 0.000000] Bluetooth: Core ver 2.15
  88. [ 0.000000] NET: Registered protocol family 31
  89. [ 0.000000] Bluetooth: HCI device and connection manager initialized
  90. [ 0.000000] Bluetooth: HCI socket layer initialized
  91. [ 0.000000] cfg80211: Using static regulatory domain info
  92. [ 0.000000] cfg80211: Regulatory domain: US
  93. [ 0.000000] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eir)
  94. [ 0.000000] (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)
  95. [ 0.000000] (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
  96. [ 0.000000] (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
  97. [ 0.000000] (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
  98. [ 0.000000] (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
  99. [ 0.000000] (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
  100. [ 0.000000] cfg80211: Calling CRDA for country: US
  101. [ 21.202728] musb_hdrc: version 6.0, musb-dma, otg (peripheral+host), debug=0
  102. [ 21.203277] musb_hdrc: USB OTG mode controller at d80ab000 using DMA, IRQ 92
  103. [ 21.204284] NET: Registered protocol family 2
  104. [ 21.204528] IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
  105. [ 21.205017] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
  106. [ 21.205200] TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
  107. [ 21.205322] TCP: Hash tables configured (established 8192 bind 8192)
  108. [ 21.205352] TCP reno registered
  109. [ 21.205596] NET: Registered protocol family 1
  110. [ 21.209045] VFS: Disk quotas dquot_6.5.2
  111. [ 21.209167] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  112. [ 21.209655] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  113. [ 21.210266] JFFS2 version 2.2. (NAND) (SUMMARY) �© 2001-2006 Red Hat, Inc.
  114. [ 21.210968] msgmni has been set to 466
  115. [ 21.214843] alg: No test for stdrng (krng)
  116. [ 21.214965] io scheduler noop registered
  117. [ 21.214996] io scheduler anticipatory registered
  118. [ 21.215026] io scheduler deadline registered
  119. [ 21.215209] io scheduler cfq registered (default)
  120. [ 21.275970] OMAP DSS rev 2.0
  121. [ 21.276062] OMAP DISPC rev 3.0
  122. [ 21.276123] OMAP VENC rev 2
  123. [ 21.276580] OMAP DSI rev 1.0
  124. [ 21.624847] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
  125. [ 21.647827] serial8250.0: ttyS0 at MMIO 0x4806a000 (irq = 72) is a ST16654
  126. [ 21.670166] serial8250.1: ttyS1 at MMIO 0x4806c000 (irq = 73) is a ST16654
  127. [ 21.691680] serial8250.2: ttyS2 at MMIO 0x49020000 (irq = 74) is a ST16654
  128. [ 21.691772] console [ttyS2] enabled
  129. [ 22.210174] brd: module loaded
  130. [ 22.218994] loop: module loaded
  131. [ 22.222534] i2c /dev entries driver
  132. [ 22.229156] usbcore: registered new interface driver catc
  133. [ 22.234649] catc: v2.8:CATC EL1210A NetMate USB Ethernet driver
  134. [ 22.240997] usbcore: registered new interface driver kaweth
  135. [ 22.246673] pegasus: v0.6.14 (2006/09/27), Pegasus/Pegasus II USB Ethernet dr
  136. [ 22.255004] usbcore: registered new interface driver pegasus
  137. [ 22.260803] rtl8150: v0.6.2 (2004/08/27):rtl8150 based usb-ethernet driver
  138. [ 22.268005] usbcore: registered new interface driver rtl8150
  139. [ 22.273986] usbcore: registered new interface driver asix
  140. [ 22.279693] usbcore: registered new interface driver cdc_ether
  141. [ 22.285827] usbcore: registered new interface driver dm9601
  142. [ 22.291748] usbcore: registered new interface driver smsc95xx
  143. [ 22.297729] usbcore: registered new interface driver gl620a
  144. [ 22.303619] usbcore: registered new interface driver net1080
  145. [ 22.309570] usbcore: registered new interface driver plusb
  146. [ 22.315338] usbcore: registered new interface driver rndis_host
  147. [ 22.321533] usbcore: registered new interface driver cdc_subset
  148. [ 22.327758] usbcore: registered new interface driver zaurus
  149. [ 22.333648] usbcore: registered new interface driver MOSCHIP usb-ethernet drr
  150. [ 22.341430] Broadcom 43xx driver loaded [ Features: L, Firmware-ID: FW13 ]
  151. [ 22.348724] usbcore: registered new interface driver zd1211rw
  152. [ 22.354797] usbcore: registered new interface driver rtl8187
  153. [ 22.360748] usbcore: registered new interface driver rndis_wlan
  154. [ 22.366973] usbcore: registered new interface driver zd1201
  155. [ 22.372924] usbcore: registered new interface driver usb8xxx
  156. [ 22.378906] usbcore: registered new interface driver rt2500usb
  157. [ 22.385009] usbcore: registered new interface driver rt73usb
  158. [ 22.391021] usbcore: registered new interface driver rt2800usb
  159. [ 22.397155] usbcore: registered new interface driver p54usb
  160. [ 22.403076] usbcore: registered new interface driver ar9170usb
  161. [ 22.409423] omap2-nand driver initializing
  162. [ 22.413848] NAND device: Manufacturer ID: 0x2c, Chip ID: 0xba (Micron NAND 2)
  163. [ 22.422943] cmdlinepart partition parsing not available
  164. [ 22.428283] Creating 5 MTD partitions on "omap2-nand":
  165. [ 22.433502] 0x000000000000-0x000000080000 : "X-Loader"
  166. [ 22.440429] 0x000000080000-0x000000260000 : "U-Boot"
  167. [ 22.447326] 0x000000260000-0x000000280000 : "U-Boot Env"
  168. [ 22.453857] 0x000000280000-0x000000680000 : "Kernel"
  169. [ 22.461700] 0x000000680000-0x000010000000 : "File System"
  170. [ 22.577270] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  171. [ 22.584289] ehci-omap ehci-omap.0: OMAP-EHCI Host Controller
  172. [ 22.590606] ehci-omap ehci-omap.0: new USB bus registered, assigned bus numb1
  173. [ 22.598419] ehci-omap ehci-omap.0: irq 77, io mem 0x48064800
  174. [ 22.619689] ehci-omap ehci-omap.0: USB 2.0 started, EHCI 1.00
  175. [ 22.626159] usb usb1: configuration #1 chosen from 1 choice
  176. [ 22.632232] hub 1-0:1.0: USB hub found
  177. [ 22.636138] hub 1-0:1.0: 3 ports detected
  178. [ 22.641204] Initializing USB Mass Storage driver...
  179. [ 22.646484] usbcore: registered new interface driver usb-storage
  180. [ 22.652648] USB Mass Storage support registered.
  181. [ 22.657348] g_ether gadget: using random self ethernet address
  182. [ 22.663269] g_ether gadget: using random host ethernet address
  183. [ 22.669830] usb0: MAC 2a:50:84:6f:7b:43
  184. [ 22.673706] usb0: HOST MAC 72:54:18:c3:7d:a9
  185. [ 22.678100] g_ether gadget: Ethernet Gadget, version: Memorial Day 2008
  186. [ 22.684844] g_ether gadget: g_ether ready
  187. [ 22.688903] musb_hdrc musb_hdrc: MUSB HDRC host driver
  188. [ 22.694610] musb_hdrc musb_hdrc: new USB bus registered, assigned bus number2
  189. [ 22.702575] usb usb2: configuration #1 chosen from 1 choice
  190. [ 22.708648] hub 2-0:1.0: USB hub found
  191. [ 22.712524] hub 2-0:1.0: 1 port detected
  192. [ 22.717620] mice: PS/2 mouse device common for all mice
  193. [ 22.723541] input: gpio-keys as /devices/platform/gpio-keys/input/input0
  194. [ 22.733123] OMAP Watchdog Timer Rev 0x31: initial timeout 60 sec
  195. [ 22.739593] Bluetooth: HCI UART driver ver 2.2
  196. [ 22.744079] Bluetooth: HCI H4 protocol initialized
  197. [ 22.748962] Bluetooth: HCI BCSP protocol initialized
  198. [ 22.754028] Bluetooth: HCILL protocol initialized
  199. [ 22.758789] Bluetooth: Broadcom Blutonium firmware driver ver 1.2
  200. [ 22.765258] usbcore: registered new interface driver bcm203x
  201. [ 22.771026] Bluetooth: Digianswer Bluetooth USB driver ver 0.10
  202. [ 22.777374] usbcore: registered new interface driver bpa10x
  203. [ 22.783020] Bluetooth: BlueFRITZ! USB driver ver 1.2
  204. [ 22.788299] usbcore: registered new interface driver bfusb
  205. [ 22.793884] Bluetooth: Generic Bluetooth USB driver ver 0.5
  206. [ 22.799804] usbcore: registered new interface driver btusb
  207. [ 22.805358] Bluetooth: Generic Bluetooth SDIO driver ver 0.1
  208. [ 22.812103] mmci-omap-hs mmci-omap-hs.0: Failed to get debounce clock
  209. [ 22.925994] Registered led device: beagleboard::usr0
  210. [ 22.931304] Registered led device: beagleboard::usr1
  211. [ 22.937164] Registered led device: beagleboard::pmu_stat
  212. [ 22.947448] usbcore: registered new interface driver usbhid
  213. [ 22.953216] usbhid: v2.6:USB HID core driver
  214. [ 22.958740] Advanced Linux Sound Architecture Driver Version 1.0.20.
  215. [ 22.965454] usb 1-2: new high speed USB device using ehci-omap and address 2
  216. [ 22.973358] usbcore: registered new interface driver snd-usb-audio
  217. [ 22.979980] No device for DAI twl4030
  218. [ 22.983673] No device for DAI twl4030 Voice
  219. [ 22.988067] No device for DAI omap-mcbsp-dai-0
  220. [ 22.992553] No device for DAI omap-mcbsp-dai-1
  221. [ 22.997161] No device for DAI omap-mcbsp-dai-2
  222. [ 23.001647] No device for DAI omap-mcbsp-dai-3
  223. [ 23.006164] No device for DAI omap-mcbsp-dai-4
  224. [ 23.010711] Not OMAP3 EVM!
  225. [ 23.013427] OMAP3 Beagle SoC init
  226. [ 23.017181] TWL4030 Audio Codec init
  227. [ 23.022064] asoc: twl4030 <-> omap-mcbsp-dai-0 mapping ok
  228. [ 23.080047] ALSA device list:
  229. [ 23.083129] #0: omap3beagle (twl4030)
  230. [ 23.091064] oprofile: using arm/armv7
  231. [ 23.095001] TCP cubic registered
  232. [ 23.098327] NET: Registered protocol family 17
  233. [ 23.102844] NET: Registered protocol family 15
  234. [ 23.107452] Bluetooth: L2CAP ver 2.13
  235. [ 23.111145] Bluetooth: L2CAP socket layer initialized
  236. [ 23.116302] Bluetooth: SCO (Voice Link) ver 0.6
  237. [ 23.120880] Bluetooth: SCO socket layer initialized
  238. [ 23.126098] Bluetooth: RFCOMM TTY layer initialized
  239. [ 23.131103] Bluetooth: RFCOMM socket layer initialized
  240. [ 23.136383] Bluetooth: RFCOMM ver 1.11
  241. [ 23.140197] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
  242. [ 23.145599] Bluetooth: BNEP filters: protocol multicast
  243. [ 23.150878] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
  244. [ 23.157928] RPC: Registered udp transport module.
  245. [ 23.162750] RPC: Registered tcp transport module.
  246. [ 23.167602] lib80211: common routines for IEEE802.11 drivers
  247. [ 23.173370] ThumbEE CPU extension supported.
  248. [ 23.177703] Power Management for TI OMAP3.
  249. [ 23.189636] VFP support v0.3: implementor 41 architecture 3 part 30 variant 1
  250. [ 23.202728] usb 1-2: configuration #1 chosen from 1 choice
  251. [ 23.209350] hub 1-2:1.0: USB hub found
  252. [ 23.213348] hub 1-2:1.0: 4 ports detected
  253. [ 23.218811] registered taskstats version 1
  254. [ 23.224090] fbcvt: 1280x720@60: CVT Name - .921M9-R
  255. [ 23.254211] Console: switching to colour frame buffer device 160x45
  256. [ 23.259643] g_ether gadget: high speed config #1: CDC Ethernet (ECM)
  257. [ 23.281677] regulator_init_complete: incomplete constraints, leaving VDAC on
  258. [ 23.289337] Waiting for root device /dev/mmcblk0p2...
  259. [ 23.463562] mmc0: new high speed SDHC card at address a11e
  260. [ 23.469848] mmcblk0: mmc0:a11e SU08G 7.40 GiB
  261. [ 23.474731] mmcblk0: p1 p2
  262. [ 23.502990] usb 1-2.1: new high speed USB device using ehci-omap and address3
  263. [ 23.519897] kjournald starting. Commit interval 5 seconds
  264. [ 23.525604] EXT3-fs: mounted filesystem with writeback data mode.
  265. [ 23.532012] VFS: Mounted root (ext3 filesystem) readonly on device 179:2.
  266. [ 23.539184] Freeing init memory: 188K
  267. [ 23.636749] usb 1-2.1: configuration #1 chosen from 1 choice
  268. [ 23.646667] hub 1-2.1:1.0: USB hub found
  269. [ 23.653869] hub 1-2.1:1.0: 4 ports detected
  270. [ 23.745117] usb 1-2.2: new full speed USB device using ehci-omap and address4
  271. [ 23.886779] usb 1-2.2: configuration #1 chosen from 1 choice
  272. [ 23.979492] usb 1-2.1.1: new high speed USB device using ehci-omap and addre5
  273. [ 24.118896] usb 1-2.1.1: configuration #1 chosen from 1 choice
  274. [ 24.967041] eth0: register 'asix' at usb-ehci-omap.0-2.1.1, ASIX AX88772 USBf
  275. [ 25.065368] usb 1-2.1.2: new full speed USB device using ehci-omap and addre6
  276. [ 25.203216] usb 1-2.1.2: configuration #1 chosen from 1 choice
  277. [ 25.299896] usb 1-2.1.3: new full speed USB device using ehci-omap and addre7
  278. [ 28.611236] Unhandled fault: external abort on non-linefetch (0x1018) at 0x40
  279. [ 28.630065] Unhandled fault: external abort on non-linefetch (0x1018) at 0x40
  280. [ 30.014221] Unhandled fault: external abort on non-linefetch (0x1018) at 0x40
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!