Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- [ 1.496574@2] create vout attribute ok
- [ 1.500463@2] ge2d_init
- [ 1.502694@2] ge2d_dev major:247
- [ 1.506288@2] ge2d start monitor
- [ 1.509130@2] osd_init
- [ 1.509141@1] ge2d workqueue monitor start
- [ 1.515551@2] osd_probe, vinfo:c05b95a4
- [ 1.519702@2] Frame buffer memory assigned at phy:0x06100000, vir:0xf1000000, size=24576K
- [ 1.527446@2] osd_probe, mydef_var:c07ecc1c, vinfo:c05b95a4
- [ 1.532992@2] init fbdev bpp is :32
- [ 1.536428@2] ---------------clear framebuffer0 memory
- [ 1.563449@0] Frame buffer memory assigned at phy:0x07900000, vir:0xf0600000, size=1024K
- [ 1.565928@0] osd_probe, mydef_var:c07ecc1c, vinfo:c05b95a4
- [ 1.571467@0] don't find to display_size_default from mesonfb-dts
- [ 1.577549@0] init fbdev bpp is :16
- [ 1.596634@0] osd probe ok
- [ 1.596923@0] enter aml_sysled_init
- [ 1.608970@0] DI: di_init
- [ 1.609028@0] DI: di_probe
- [ 1.609745@0] aml_wdt_driver_init,306
- [ 1.609794@0] ** disable watchdog
- [ 1.611395@0] keys===========================================
- [ 1.616866@0] keys_devno=f400000
- [ 1.620403@0] securitykey: device aml_keys created
- [ 1.624831@0] amlkeys=0
- [ 1.627337@0] platform_driver_register--aml_keys_driver--------------------
- [ 1.634619@0] start uart_ao_ttyS0:(irq = 122)
- [ 1.638446@0] register uart_ao ok
- [ 1.642162@0] start uart_a_ttyS1:(irq = 58)
- [ 1.645893@0] register uart_a ok
- [ 1.649526@0] set uart_b pinmux use pinctrl subsystem
- [ 1.654169@0] P_AO_RTI_PIN_MUX_REG:78025861
- [ 1.658296@0] start uart_b_ttyS2:(irq = 107)
- [ 1.662559@0] register uart_b ok
- [ 1.666134@0] start uart_d_ttyS4:(irq = 126)
- [ 1.669964@0] register uart_d ok
- [ 1.673485@0] dwc_otg: version 3.10a 12-MAY-2014
- [ 1.677788@0] dwc_otg_driver_probe NOT match
- [ 1.682098@0] usb1: type: 1, speed: 0, config: 0, dma: 0, id: 1, phy: fe108820, ctrl: fe080000
- [ 1.690585@0] USB (1) use clock source: XTAL input
- [ 1.716521@0] Core Release: 3.10a
- [ 1.716569@0] Setting default values for core params
- [ 1.719162@0] curmode: 1, host_only: 1
- [ 1.743145@0] Using Buffer DMA mode
- [ 1.743194@0] OTG VER PARAM: 1, OTG VER FLAG: 1
- [ 1.745521@0] Working on port type = HOST
- [ 1.749556@0] dwc_otg lm1: DWC OTG Controller
- [ 1.753907@0] dwc_otg lm1: new USB bus registered, assigned bus number 1
- [ 1.760534@0] dwc_otg lm1: irq 63, io mem 0x00000000
- [ 1.765493@0] -------hcd->flags.d32 = 0
- [ 1.769264@0] Init: Port Power? op_state=1
- [ 1.773358@0] Init1: Power Port (0)
- [ 1.776900@0] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
- [ 1.783766@0] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 1.791071@0] usb usb1: Product: DWC OTG Controller
- [ 1.795963@0] usb usb1: Manufacturer: Linux 3.10.99 dwc_otg_hcd
- [ 1.801814@0] usb usb1: SerialNumber: lm1
- [ 1.806628@0] hub 1-0:1.0: USB hub found
- [ 1.809700@0] hub 1-0:1.0: 1 port detected
- [ 1.814131@0] usb0: type: 1, speed: 0, config: 0, dma: 0, id: 1, phy: fe108800, ctrl: fe040000
- [ 1.822391@0] USB (0) use clock source: XTAL input
- [ 1.848156@0] Core Release: 3.10a
- [ 1.848203@0] Setting default values for core params
- [ 1.850794@0] curmode: 1, host_only: 1
- [ 1.874782@0] Using Buffer DMA mode
- [ 1.874831@0] OTG VER PARAM: 1, OTG VER FLAG: 1
- [ 1.877158@0] Working on port type = HOST
- [ 1.881187@0] dwc_otg lm0: DWC OTG Controller
- [ 1.885543@0] dwc_otg lm0: new USB bus registered, assigned bus number 2
- [ 1.892212@0] dwc_otg lm0: irq 62, io mem 0x00000000
- [ 1.897081@0] -------hcd->flags.d32 = 0
- [ 1.900900@0] Init: Port Power? op_state=1
- [ 1.904997@0] Init1: Power Port (0)
- [ 1.908529@0] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
- [ 1.915438@0] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 1.922754@0] usb usb2: Product: DWC OTG Controller
- [ 1.927558@0] usb usb2: Manufacturer: Linux 3.10.99 dwc_otg_hcd
- [ 1.933493@0] usb usb2: SerialNumber: lm0
- [ 1.938232@0] hub 2-0:1.0: USB hub found
- [ 1.941337@0] hub 2-0:1.0: 1 port detected
- [ 1.946021@0] boot_device_flag : 1
- [ 1.948780@0] ===========================================amlnf_init:642,nand device tree ok,dev-name:nand
- [ 1.958299@0] Nand PHY driver Version: 1.01.001.0006 (c) 2013 Amlogic Inc.
- [ 1.965185@0] amlnf_phy_init : amlnf init flag 0
- [ 1.969827@0] ######STS IRQ mode for nand driver
- [ 1.974439@0] NAND device id: ad de 14 a7 42 4a ad de
- [ 1.979336@0] detect NAND device: E revision 1Ynm NAND 8GiB H27UCG8T2E
- [ 2.012008@1] Indeed it is in host mode hprt0 = 00021501
- [ 2.032613@0] AML_NAND_NEW_OOB : new oob
- [ 2.032670@0] bus_cycle=6, bus_timing=8,system=3.9ns,flash->T_REA =16,flash->T_RHOH=15
- [ 2.038801@0] boot_device_flag = 1
- [ 2.044660@0] hynix nand get default reg value at blk:7, page:1792
- [ 2.049477@0] NAND CKECK : arg nbbt: arg_valid= 1, valid_blk_addr = 4, valid_page_addr = 0
- [ 2.061213@0] nand block at blk 6 is bad
- [ 2.061266@0] nand block at blk 7 is bad
- [ 2.066428@0] NAND CKECK : arg ncnf: arg_valid= 1, valid_blk_addr = 9, valid_page_addr = 0
- [ 2.073596@0] nand shipped bbt at block 8
- [ 2.078163@0] nand block at blk 6 is bad
- [ 2.080889@0] nand block at blk 7 is bad
- [ 2.112188@0] NAND CKECK : arg nkey: arg_valid= 1, valid_blk_addr = 5, valid_page_addr = 6
- [ 2.115516@0] i=0,register --- nand_key
- [ 2.119956@0] nand block at blk 6 is bad
- [ 2.122780@0] nand block at blk 7 is bad
- [ 2.160917@0] NAND CKECK : arg nenv: arg_valid= 1, valid_blk_addr = 12, valid_page_addr = 90
- [ 2.166693@0] nand blk 6 is shipped bad block
- [ 2.168240@0] nand blk 7 is shipped bad block
- [ 2.172748@0] nand adjust phy offset : block 4
- [ 2.177084@0] nand adjust phy offset : block 4
- [ 2.181523@0] nfboot : offset: 0x000000000000 -0x000001000000 : partitons 0 : single_chip single_plane
- [ 2.191150@0] nfcache : offset: 0x00000d800000 -0x000026000000 : partitons 1 : single_chip multi_plane
- [ 2.191980@1] usb 1-1: new high-speed USB device number 2 using dwc_otg
- [ 2.192251@3] Indeed it is in host mode hprt0 = 00001101
- [ 2.212542@0] nfcode : offset: 0x000033800000 -0x000052000000 : partitons 5 : single_chip multi_plane
- [ 2.222059@0] nfdata : offset: 0x000085800000 -0x00017a800000 : partitons 1 : single_chip multi_plane
- [ 2.231652@0] bad block count = 0
- [ 2.231652@0]
- [ 2.238400@0] bad block count = 0
- [ 2.238400@0]
- [ 2.245528@0] bad block count = 0
- [ 2.245528@0]
- [ 2.264846@0] bad block count = 0
- [ 2.264846@0]
- [ 2.264907@0] amlnand_add_nftl:
- [ 2.267720@0] Creating 1 ntd partitions
- [ 2.271129@0] block_num 76
- [ 2.275779@0] ------init_ntd
- [ 2.277366@0] ntd: Giving out device 0 to nfcache
- [ 2.281445@0] Creating 5 ntd partitions
- [ 2.285292@0] block_num 164
- [ 2.292553@0] ntd: Giving out device 1 to nfcode
- [ 2.292687@0] Creating 1 ntd partitions
- [ 2.296505@0] block_num 757
- [ 2.318112@0] ntd: Giving out device 2 to nfdata
- [ 2.319014@0] boot_device_flag : 1
- [ 2.320488@0] register_ntd_blktrans start
- [ 2.324530@0] ntd device 250!
- [ 2.327415@0] ntd->name: nfcache
- [ 2.330632@0] adjust_block_num : 4,reserved_block_ratio 10
- [ 2.336122@0] nftl version 140911a
- [ 2.339462@0] nftl part attr 0
- [ 2.344362@0] nftl start:76,12
- [ 2.345724@0] first
- [ 2.393359@3] usb 1-1: New USB device found, idVendor=05e3, idProduct=0608
- [ 2.394622@3] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
- [ 2.401892@3] usb 1-1: Product: USB2.0 Hub
- [ 2.406968@3] hub 1-1:1.0: USB hub found
- [ 2.410162@3] hub 1-1:1.0: 4 ports detected
- [ 2.416004@3] Indeed it is in host mode hprt0 = 00041901
- [ 2.421970@0] average_erase_count:0
- [ 2.422758@0] second 45,64
- [ 2.425440@0] part->max_discard_block = 4
- [ 2.479855@0] all block full!!
- [ 2.479897@0] all discard block full!!
- [ 2.481048@0] free list:
- [ 2.483661@0] free block cnt = 63
- [ 2.486907@0] new current block is 30
- [ 2.490541@0] total discard page count is 0
- [ 2.494744@0] create_part_list:1235,current_used_discard_block=29,current_discard_block_used_count=120
- [ 2.504575@0] unmappig_pages=15563,discarded_pages=0,mapping_pages=821
- [ 2.510456@0] nftl ok!
- [ 2.514160@0] Enable QUEUE_FLAG_DISCARD for NFTL
- [ 2.518136@0] aml_nftl_add_ntd ok
- [ 2.520675@0] ntd device 250!
- [ 2.523671@0] ntd->name: nfcode
- [ 2.526740@0] adjust_block_num : 4,reserved_block_ratio 10
- [ 2.532252@0] nftl version 140911a
- [ 2.535590@0] nftl part attr 0
- [ 2.542648@0] nftl start:164,19
- [ 2.543025@0] first
- [ 2.591985@3] usb 2-1: new low-speed USB device number 2 using dwc_otg
- [ 2.593768@3] Indeed it is in host mode hprt0 = 00041901
- [ 2.610718@0] found discard block:68
- [ 2.702408@0] average_erase_count:2
- [ 2.702456@0] second 161,145
- [ 2.703137@0] part->max_discard_block = 4
- [ 2.797991@3] usb 2-1: New USB device found, idVendor=099a, idProduct=7202
- [ 2.799263@3] usb 2-1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
- [ 2.806550@3] usb 2-1: Product: Wireless Keyboard/Mouse
- [ 2.817166@3] input: Wireless Keyboard/Mouse as /devices/lm0/usb2/2-1/2-1:1.0/input/input0
- [ 2.820679@3] hid-generic 0003:099A:7202.0001: input,hidraw0: USB HID v1.11 Keyboard [Wireless Keyboard/Mouse] on usb-lm0-1/input0
- [ 2.843510@3] input: Wireless Keyboard/Mouse as /devices/lm0/usb2/2-1/2-1:1.1/input/input1
- [ 2.847502@3] hid-generic 0003:099A:7202.0002: input,hiddev0,hidraw1: USB HID v1.11 Mouse [Wireless Keyboard/Mouse] on usb-lm0-1/input1
- [ 2.886967@0] current_block1:83
- [ 2.890294@0] recover_current_block_mapping invalid page data!!
- [ 2.891681@0] recover_current_block_mapping invalid page data!!
- [ 2.897637@0] recover_current_block_mapping invalid page data!!
- [ 2.903517@0] recover_current_block_mapping invalid page data!!
- [ 2.909364@0] recover_current_block_mapping invalid page data!!
- [ 2.915311@0] recover_current_block_mapping invalid page data!!
- [ 2.921982@0] currnet_discard_block1:68
- [ 2.990913@0] reach the last discard page:39
- [ 2.991062@0] free list:
- [ 2.992216@0] free block cnt = 117
- [ 2.995544@0] new current block is 142
- [ 3.260425@0] prio_garbage_collect_no_last_page_in_create_list put_phy_block_to_free_list!
- [ 3.845719@0] recover_current_block_mapping : fill the current block, from page 255
- [ 3.847769@0] total discard page count is 39
- [ 3.852053@0] create_part_list:1235,current_used_discard_block=68,current_discard_block_used_count=111
- [ 3.862484@0] unmappig_pages=12077,discarded_pages=18959,mapping_pages=6084
- [ 3.868202@0] nftl ok!
- [ 3.872108@0] Enable QUEUE_FLAG_DISCARD for NFTL
- [ 3.876044@0] Enable QUEUE_FLAG_DISCARD for NFTL
- [ 3.880563@0] Enable QUEUE_FLAG_DISCARD for NFTL
- [ 3.885298@1] Enable QUEUE_FLAG_DISCARD for NFTL
- [ 3.889761@1] Enable QUEUE_FLAG_DISCARD for NFTL
- [ 3.894182@1] aml_nftl_add_ntd ok
- [ 3.896770@1] ntd device 250!
- [ 3.899713@1] ntd->name: nfdata
- [ 3.902864@1] adjust_block_num : 4,reserved_block_ratio 10
- [ 3.908288@1] nftl version 140911a
- [ 3.911761@1] nftl part attr 0
- [ 3.933006@1] size_in_blk 757; total_block 746;
- [ 3.933058@1] nftl start:746,72
- [ 3.936275@1] first
- [ 4.329631@1] found discard block:406
- [ 4.587273@1] found discard block:673
- [ 4.594104@1] found discard block:680
- [ 4.659216@1] average_erase_count:43
- [ 4.659281@1] second 745,674
- [ 4.660029@1] part->max_discard_block = 4
- [ 5.499332@1] current_block1:507
- [ 5.620491@1] recover_current_block_mapping invalid page data!!
- [ 5.621877@1] recover_current_block_mapping invalid page data!!
- [ 5.627797@1] recover_current_block_mapping invalid page data!!
- [ 5.633683@1] recover_current_block_mapping invalid page data!!
- [ 5.639558@1] recover_current_block_mapping invalid page data!!
- [ 5.645470@1] recover_current_block_mapping invalid page data!!
- [ 6.297458@1] currnet_discard_block1:680
- [ 6.530581@1] reach the last discard page:181
- [ 6.532534@1] free list:
- [ 6.532578@1] free block cnt = 572
- [ 6.535303@1] new current block is 509
- [ 7.025797@0] prio_garbage_collect_no_last_page_in_create_list put_phy_block_to_free_list!
- [ 7.401246@0] recover_current_block_mapping : fill the current block, from page 255
- [ 7.403339@0] total discard page count is 691
- [ 7.407620@0] create_part_list:1235,current_used_discard_block=680,current_discard_block_used_count=22
- [ 7.422496@0] unmappig_pages=54396,discarded_pages=110796,mapping_pages=7352
- [ 7.423930@0] nftl ok!
- [ 7.427857@1] Enable QUEUE_FLAG_DISCARD for NFTL
- [ 7.431633@1] aml_nftl_add_ntd ok
- [ 7.434195@1] init_aml_nftl end
- [ 7.440424@1] amvideocap_init_module
- [ 7.440883@1] amvideocap_probe,amvideocap
- [ 7.444826@1] amvideocap_dev_register buf:0da00000,size:600000.
- [ 7.451426@1] Amlogic A/V streaming port init
- [ 7.458289@1] buffersize=262144,0,start=0
- [ 7.459010@1] Subtitle stbuf alloced at 0xee440000, size = 262144
- [ 7.465083@1] changed the (2) buffer size from 0 to 262144
- [ 7.471008@1] init vdec memsource 9a00000->d9fffff
- [ 7.475685@1] [tsync_pcr_init]init success.
- [ 7.479704@1] regist mpeg12 codec profile
- [ 7.483715@1] regist mpeg4 codec profile
- [ 7.487400@1] amvdec_vc1 module init
- [ 7.491121@1] regist vc1 codec profile
- [ 7.494692@1] amvdec_h264 module init
- [ 7.498524@1] regist h264 codec profile
- [ 7.502138@1] amvdec_h264mvc module init
- [ 7.506197@1] regist hmvc codec profile
- [ 7.509826@1] amvdec_h265 module init
- [ 7.513667@1] regist hevc codec profile
- [ 7.517461@1] regist mjpeg codec profile
- [ 7.521169@1] amvdec_real module init
- [ 7.524994@1] regist real codec profile
- [ 7.528616@1] amvdec_avs module init
- [ 7.532834@1] alloc_keep_buffer keep_y_addr ede00000
- [ 7.537121@1] alloc_keep_buffer keep_u_addr ee500000
- [ 7.542070@1] alloc_keep_buffer keep_v_addr ee480000
- [ 7.546975@1] yaddr=ede00000,u_addr=ee500000,v_addr=ee480000
- [ 7.553279@1] create_ge2d_work_queue video task ok
- [ 7.558307@2] efuse===========================================
- [ 7.563730@2] efuse: device efuse created
- [ 7.567442@2] efuse--------------------------------------------
- [ 7.573149@2] SARADC Driver init.
- [ 7.576684@2] __saradc_probe__
- [ 7.722071@2] saradc calibration: ref_val = 515
- [ 7.722122@2] saradc calibration: ref_nominal = 512
- [ 7.725831@2] saradc calibration: coef = 4112
- [ 7.730356@2] Remote Driver
- [ 7.733070@2] Remote platform_data g_remote_base=fe600580
- [ 7.738340@2] set drvdata completed
- [ 7.741861@2] device_create_file completed
- [ 7.746809@2] input: aml_keypad as /devices/platform/meson-remote/input/input2
- [ 7.753895@2] input_register_device completed
- [ 7.757847@2] [0xffffff00] = 0x1dd0190
- [ 7.761507@2] [0xffffff04] = 0xf800ca
- [ 7.765163@2] [0xffffff08] = 0x82006e
- [ 7.768780@2] [0xffffff0c] = 0x3c0030
- [ 7.772430@2] [0xffffff10] = 0x30fa0013
- [ 7.776226@2] [0xffffff18] = 0x6f19000
- [ 7.779949@2] [0xffffff1c] = 0xbe40
- [ 7.783425@2] [0x0] = 0xfa00a0
- [ 7.786443@2] [0x4] = 0xfa00a0
- [ 7.789474@2] [0x8] = 0xfa00a0
- [ 7.792527@2] [0xc] = 0x640030
- [ 7.795535@2] [0x10] = 0x30fa0013
- [ 7.798825@2] [0x18] = 0x961b800
- [ 7.802045@2] [0x1c] = 0x9740
- [ 7.804973@2] [0x20] = 0x104
- [ 7.807830@2] [0x24] = 0x0
- [ 7.810514@2] [0x28] = 0x0
- [ 7.813213@2] set_remote_mode[69]
- [ 7.816526@2] remote config major:238
- [ 7.820640@2] physical address:0x2e612000
- [ 7.824404@2] GPIO Keypad Driver init.
- [ 7.828031@2] ==gpio_key_probe==
- [ 7.831162@2] reg:2620,clearmask=400040,setmask=1
- [ 7.835887@2] reg:2622,clearmask=ff0000,set pin=3
- [ 7.840563@2] reg:2623,clearmask=7000000,setmask=7
- [ 7.845348@2] reg:2620,clearmask=800080,setmask=10001
- [ 7.850434@2] reg:2622,clearmask=ff000000,set pin=3
- [ 7.855282@2] reg:2623,clearmask=70000000,setmask=7
- [ 7.860181@2] power key(116) registed.
- [ 7.860187@0] key 116 up
- [ 7.866740@2] input: gpio_keypad as /devices/platform/gpio_keypad.6/input/input3
- [ 7.874042@2] gpio keypad register input device completed.
- [ 7.879187@2] gpio keypad major:237
- [ 7.883259@2] spi_nor_init
- [ 7.885589@2] amlogic_spi_nor_probe:
- [ 7.888884@2] amlogic_spi->state_name:default
- [ 7.893502@2] AMLOGIC_SPI_NOR cc000000.spi: master is unqueued, this is deprecated
- [ 7.900986@2] check_storage_device : spi boot_device_flag : -1
- [ 7.906563@2] spi_nor_probe
- [ 7.909314@2] spi_nor_probe 629 boot_device_flag 1 : do not init spi
- [ 7.915661@2] spi_nor: probe of apollospi:32766 failed with error -12
- [ 7.922060@2] amlogic_spi_nor_probe over
- [ 7.926203@2] mmc driver version: 1.07, 2015-01-21: fix a bug in tuning which caused eMMC data CRC error
- [ 7.935655@2] host->base fe108c20
- [ 7.938715@2] pdata->caps 7
- [ 7.941437@2] pdata->caps2 0
- [ 7.944318@2] get property: port, value:0x00000001
- [ 7.950789@2] get property: ocr_avail, value:0x00200000
- [ 7.957297@2] get property: f_min, value:0x000493e0
- [ 7.963791@2] get property: f_max, value:0x02faf080
- [ 7.970272@2] get property: f_max_w, value:0x02faf080
- [ 7.976781@2] get property: max_req_size, value:0x00020000
- [ 7.983275@2] get property: irq_in, value:0x00000003
- [ 7.989755@2] get property: irq_out, value:0x00000005
- [ 7.996268@2] get property: gpio_cd, str:CARD_6
- [ 8.002240@2] get property: pinname, str:sd
- [ 8.007854@2] get property: jtag_pin, str:CARD_0
- [ 8.013841@2] get property: card_type, value:0x00000005
- [ 8.020322@2] get property: gpio_dat3, str:CARD_4
- [ 8.026324@2] normal card in
- [ 8.062000@2] reg:2620,clearmask=80008,setmask=10001
- [ 8.062066@2] reg:2621,clearmask=ff000000,set pin=49
- [ 8.066372@2] reg:2623,clearmask=7000,setmask=7
- [ 8.070876@2] reg:2620,clearmask=200020,setmask=1
- [ 8.075637@2] reg:2622,clearmask=ff00,set pin=49
- [ 8.080226@2] reg:2623,clearmask=700000,setmask=7
- [ 8.085162@2] pdata->caps 10f
- [ 8.087846@2] pdata->caps2 0
- [ 8.090705@2] get property: port, value:0x00000000
- [ 8.097219@2] get property: ocr_avail, value:0x00200000
- [ 8.103705@2] get property: f_min, value:0x000493e0
- [ 8.110186@2] get property: f_max, value:0x02faf080
- [ 8.116694@2] get property: max_req_size, value:0x00020000
- [ 8.123192@2] get property: pinname, str:sdio
- [ 8.128976@2] get property: card_type, value:0x00000003
- [ 9.061984@0] [aml_sdio_timeout] time_start_cnt:996
- [ 9.061984@0] [aml_sdio_print_err] sd: Timeout error, Cmd8 arg 0x1aa, Xfer 0 Bytes, host->xfer_step=12, host->cmd_is_stop=0, pdata->port=1, virqs=0x13, virqc=0x1f001f00, conf->cmd_clk_divide=199, pdata->clkc=199, conf->bus_width=0, pdata->width=0, conf=0x416270c7, clock=398437
- [ 9.061984@0]
- [ 10.081972@0] [aml_sdio_timeout] time_start_cnt:991
- [ 10.081972@0] <4>[ 10.128773@3] sd: SD Status: Invalid Allocation Unit size.
- [ 10.128835@3] sd: card lacks mandatory switch function, performance might suffer.
- [ 10.136249@3] sd: new SD card at address b368, clock 19921875, 4-bit-bus-width
- [ 10.143945@3] mmcblk0: sd:b368 SMI-S 495 MiB
- [ 10.174052@3] mmcblk0: p1
- [ 10.251975@3] [aml_sdio_probe] aml_sdio_probe() success!
- [ 10.253487@3] host->base fe108e00
- [ 10.255078@3] pdata->caps 80000547
- [ 10.258374@3] pdata->caps2 0
- [ 10.261218@3] get property: port, value:0x00000005
- [ 10.267746@3] get property: ocr_avail, value:0x00200000
- [ 10.274233@3] get property: f_min, value:0x000493e0
- [ 10.280703@3] get property: f_max, value:0x02faf080
- [ 10.287214@3] get property: max_req_size, value:0x00020000
- [ 10.293725@3] get property: pinname, str:emmc
- [ 10.299493@3] get property: card_type, value:0x00000001
- [ 10.306016@3] get property: gpio_dat3, str:BOOT_3
- [ 10.311986@3] [is_emmc_exist] host->storage_flag=1, POR_BOOT_VALUE=7
- [ 10.318280@3] [aml_sdhc_probe]: there is not eMMC/tsd, skip sdhc_c dts config!
- [ 10.391953@3] [aml_sdhc_probe] aml_sdhc_probe() success!
- [ 10.392265@3] [dsp]DSP start addr 0xc5e00000
- [ 10.395948@3] [dsp]register dsp to char divece(257)
- [ 10.401666@3] amlogic audio spdif interface device init!
- [ 10.406150@3] name=nand_key nand_key
- [ 10.410231@3] register_aes_algorithm:488,new way
- [ 10.414243@3] unkown current key-name,key_read_show:1396
- [ 10.419469@3] get keyexample fail, aml_rtc_probe:755
- [ 10.425323@3] aml_rtc rtc.0: rtc core: registered aml_rtc as rtc0
- [ 10.434143@3] amaudio2: device amaudio2 created
- [ 10.435209@3] Amlogic CEC Driver, (c) 2016 Gerald Dachs, Version: 0.0.1
- [ 10.441549@3] [amlogic_cec] amlogic_cec_init(): CEC init
- [ 10.447116@3] [amlogic_cec] amlogic_cec_init(): CEC init finished: 0
- [ 10.453269@3] Error: Didn't get power valid value --- wifi_power_probe 323
- [ 10.460002@3] wifi_power power_gpio is 6
- [ 10.463901@3] wifi_power power_gpio2 is 108
- [ 10.468685@3] amlogic rfkill init
- [ 10.471405@3] enter bt_probe of_node
- [ 10.471426@3] not get gpio_en
- [ 10.474288@3] not get gpio_wake
- [ 10.502218@3] wifi_request_32k_clk : OFF-->ON for bt_rfkill
- [ 10.502282@3] clock_32k_pin(107) : (null)
- [ 10.506182@3] clock_32k_pin(107) : sdio_wifi
- [ 10.084094@3] [aml_sdio_print_err] sd: Timeout error, Cmd8 arg 0x1aa, Xfer 0 Bytes, host->xfer_step=12, host->cmd_is_stop=0, pdata->port=1, virqs=0x13, virqc=0x3f003f00, conf->cmd_clk_divide=199, pdata->clkc=199, conf->bus_width=0, pdata->width=0, conf=0x416270c7, clock=398437
- [ 10.084094@3]
- [ 10.672595@3] UMP: UMP device driver -0.90.0-17040-g9a1d7cb loaded
- [ 10.673788@3] aml_aes aml_aes: Aml AES
- [ 10.677735@3] aml_tdes aml_tdes: Aml TDES
- [ 10.682413@3] enter rt5616_modinit
- [ 10.684798@3] dummy_codec_platform_probe
- [ 10.688768@3] == ES8323 == es8323_modinit()
- [ 10.693461@3] enter aml_i2s_dai_probe
- [ 10.693489@3] i2s get no clk src setting in dts, use the default mpll 0
- [ 10.699136@3] [aml-i2s-dai]enterd aml_i2s_dai_probe,old_samplerate:0,sample_rate=48000
- [ 10.707366@3] enter aml_pcm_dai_probe
- [ 10.707623@3] [aml-spdif-dai]enter aml_dai_spdif_init
- [ 10.712064@3] [aml-spdif-dai]enterd aml_spdif_play,set_clock:-1,sample_rate=4
- [ 10.719140@3] audio_set_958_clk, freq=4,
- [ 10.723060@3] IEC958 16bit
- [ 10.725723@3] hdmitx: audio: aout notify rate 48000
- [ 10.730566@3] hdmitx: audio: aout notify size 16
- [ 10.735173@3] hdmitx: audio: aout notify format CT_PCM
- [ 10.740275@3] hdmitx: audio: audio channel num is 1
- [ 10.745136@3] hdmitx: audio: SPDIF
- [ 10.748502@3] hdmitx: audio: current VIC: 16
- [ 10.752746@3] hdmitx: audio: audio sample rate: 3
- [ 10.757409@3] hdmitx: audio: reset audio N para
- [ 10.761921@3] hdmitx: audio: PCM out to HDMI
- [ 10.766176@3] hdmitx: audio: i2s_to_spdif_flag:1
- [ 10.770828@3] hdmitx: audio: Enable audio spdif to HDMI
- [ 10.776047@3] hdmitx: audio: Audio Type: PCM
- [ 10.780324@3] hdmitx: audio: set audio param
- [ 10.784627@3] [aml-spdif-dai]aml_spdif_probe
- [ 10.789095@3] test codec rt5616
- [ 10.791878@3] test_codec_of_node, node rt5616 disable
- [ 10.796923@3] test codec rt5631
- [ 10.800011@3] test_codec_of_node, node rt5631 disable
- [ 10.805051@3] test codec wm8960
- [ 10.808150@3] test_codec_of_node, node wm8960 disable
- [ 10.813187@3] test codec dummy_codec
- [ 10.816723@3] using external codec, index = 4
- [ 10.821051@3] using external dummy codec
- [ 10.825241@3] enter spdif_dit_probe
- [ 10.828504@3] aml_spdif_unmute
- [ 10.831946@3] codec_name = dummy_codec.0
- [ 10.835899@3] enter aml_asoc_init
- [ 10.835954@3] p_aml_audio->hp_disable=1
- [ 10.839329@3] falied to get spk event delay time paraments from dts file
- [ 10.846020@3] spk_event delay_time = 0
- [ 10.850635@3] aml-i2s 0:playback preallocate_dma_buffer: area=f0782000, addr=2de00000, size=524288
- [ 10.858916@3] aml-i2s 1:capture preallocate_dma_buffer: area=f049a000, addr=2dc60000, size=65536
- [ 10.867447@3] aml_snd_m8 aml_m8_sound_card.4: dummy_codec <-> aml-i2s-dai.0 mapping ok
- [ 10.876460@3] aml-i2s 0:playback preallocate_dma_buffer: area=f0804000, addr=2df00000, size=524288
- [ 10.884573@3] aml-i2s 1:capture preallocate_dma_buffer: area=f04bb000, addr=2dea0000, size=65536
- [ 10.893062@3] aml_snd_m8 aml_m8_sound_card.4: dit-hifi <-> aml-spdif-dai.0 mapping ok
- [ 10.902876@0] -----ext_codec=1---
- [ 10.904176@0] =aml_m8_pinmux_init==,aml_m8_pinmux_init done,---0
- [ 10.910482@0] TCP: cubic registered
- [ 10.914766@0] NET: Registered protocol family 10
- [ 10.918880@0] NET: Registered protocol family 17
- [ 10.922956@0] Key type dns_resolver registered
- [ 10.927768@0] VFP support v0.3: implementor 41 architecture 2 part 30 variant 5 rev 1
- [ 10.935055@0] Registering SWP/SWPB emulation handler
- [ 10.939919@0] enter meson_pm_init
- [ 10.943441@0] enter meson_pm_probe!
- [ 10.946699@0] meson_pm_probe done !
- [ 10.950177@0] AO cpu runs ok.
- [ 10.954931@0] regulator-dummy: disabling
- [ 10.957530@0] console [netcon0] enabled
- [ 10.960785@0] netconsole: network logging started
- [ 10.965648@0] AO cpu stop ok.
- [ 10.968785@0] AO cpu runs ok.
- [ 10.971382@0] aml_rtc rtc.0: setting system clock to 1970-01-01 00:08:06 UTC (486)
- [ 10.979084@0] meson_cpufreq_probe:SYSPLL request to be fixed
- [ 10.984576@0] meson_cpufreq: no voltage_control prop
- [ 10.989446@0] voltage_control = 0
- [ 10.993952@0] buf[0]=f8,buf[1]=b0,err=4
- [ 10.996546@0] adc=391,TS_C=24,flag=1
- [ 11.000112@0] efuse_flag=a
- [ 11.002815@0] amlogic_thermal_probe, this chip is trimmed, use thermal
- [ 11.009276@0] amlogic-thermal aml_thermal: amlogic thermal probe start
- [ 11.015801@0] #thermal-cells=7
- [ 11.018798@0] pdata->temp_trip_count=4
- [ 11.022553@0] temperature=70000 on trip point=0
- [ 11.027024@0] fixing high_freq=1488001 to 1250000 at trip point 0,level=1
- [ 11.033800@0] fixing low_freq=1488001 to 1250000 at trip point 0,level=1
- [ 11.040446@0] gpu[0].gpu_high_freq=511,tmp_level[0].gpu_high_freq=511
- [ 11.046880@0] cpu[0] core num==3
- [ 11.050056@0] gpu[0] core num==2
- [ 11.053281@0] temperature=80000 on trip point=1
- [ 11.057762@0] fixing high_freq=1200001 to 768000 at trip point 1,level=2
- [ 11.064456@0] fixing low_freq=1200001 to 768000 at trip point 1,level=2
- [ 11.071012@0] gpu[1].gpu_high_freq=435,tmp_level[1].gpu_high_freq=435
- [ 11.077439@0] cpu[1] core num==2
- [ 11.080630@0] gpu[1] core num==2
- [ 11.083849@0] temperature=90000 on trip point=2
- [ 11.088328@0] fixing high_freq=800001 to 768000 at trip point 2,level=2
- [ 11.094909@0] fixing low_freq=800001 to 768000 at trip point 2,level=2
- [ 11.101404@0] gpu[2].gpu_high_freq=328,tmp_level[2].gpu_high_freq=328
- [ 11.107830@0] cpu[2] core num==1
- [ 11.111014@0] gpu[2] core num==1
- [ 11.114246@0] temperature=260000 on trip point=3
- [ 11.118807@0] fixing high_freq=-1 to -22 at trip point 3,level=-1
- [ 11.124868@0] fixing low_freq=-1 to -22 at trip point 3,level=-1
- [ 11.130853@0] gpu[3].gpu_high_freq=-1,tmp_level[3].gpu_high_freq=-1
- [ 11.137098@0] cpu[3] core num==-1
- [ 11.140368@0] gpu[3] core num==-1
- [ 11.143679@0] idle interval=1000
- [ 11.146871@0] pdata->name:aml_thermal
- [ 11.150899@0] tmp_trip[0].cpu_core_upper=1
- [ 11.154611@0] tmp_trip[1].cpu_core_upper=2
- [ 11.158646@0] tmp_trip[2].cpu_core_upper=3
- [ 11.162741@0] tmp_trip[3].cpu_core_upper=-1
- [ 11.166886@0] aml_thermal bind thermal-cpucore-0 okay !
- [ 11.172117@0] aml_thermal bind thermal-cpufreq-0 okay !
- [ 11.177379@0] amlogic: Kernel Thermal management registered
- [ 11.182830@0] amlogic-thermal aml_thermal: amlogic thermal probe done
- [ 11.189380@0] ALSA device list:
- [ 11.192350@0] #0: AML-M8AUDIO
- [ 11.195775@0] Freeing unused kernel memory: 180K (c077e000 - c07ab000)
- [ 11.229853@1] tvmode set to 1080p
- [ 11.229853@1]
- [ 11.229874@1] don't set the same mode as current.
- [ 11.313586@1] vfm_map_store:rm default
- [ 11.313586@1]
- [ 11.313675@1] vfm_map_store:add default decoder ppmgr deinterlace amvideo
- [ 11.313675@1]
- [ 11.380030@1] Console: switching to colour frame buffer device 240x67
- [ 11.456222@1] aml_nftl_open ok!
- [ 11.456917@1] blktrans_ioctl -cmd: 5331,801c0204,64
- [ 11.488359@1] aml_nftl_open ok!
- [ 11.488724@1] blktrans_ioctl -cmd: 5331,801c0204,64
- [ 11.494395@3] aml_nftl_open ok!
- [ 11.494548@3] aml_nftl_open ok!
- [ 11.540616@0] aml_nftl_open ok!
- [ 11.540726@0] aml_nftl_open ok!
- [ 11.821981@0] -----hotplug:2
- [ 11.890674@2] aml_nftl_open ok!
- [ 11.909229@2] aml_nftl_open ok!
- [ 11.913038@2] IRQ94 no longer affine to CPU2
- [ 11.913234@1] CPU2: shutdown
- [ 11.927905@1] aml_nftl_open ok!
- [ 11.929151@1] force enable DISCARD here for ext4 fs
- [ 11.929165@1] EXT4-fs (system): couldn't mount as ext3 due to feature incompatibilities
- [ 11.929268@1] aml_nftl_open ok!
- [ 11.929344@1] force enable DISCARD here for ext4 fs
- [ 11.929353@1] EXT4-fs (system): couldn't mount as ext2 due to feature incompatibilities
- [ 11.929412@1] aml_nftl_open ok!
- [ 11.929475@1] force enable DISCARD here for ext4 fs
- [ 12.002269@3] IRQ62 no longer affine to CPU3
- [ 12.002272@3] IRQ63 no longer affine to CPU3
- [ 12.002288@3] IRQ95 no longer affine to CPU3
- [ 12.002482@1] CPU3: shutdown
- [ 12.003321@0] checked enable EXT4 DISCARD here
- [ 12.003334@0] EXT4-fs (system): mounted filesystem with ordered data mode. Opts: (null)
- [ 12.220545@1] aml_nftl_open ok!
- [ 12.221812@1] force enable DISCARD here for ext4 fs
- [ 12.221826@1] EXT4-fs (data): couldn't mount as ext3 due to feature incompatibilities
- [ 12.222003@1] aml_nftl_open ok!
- [ 12.222096@1] force enable DISCARD here for ext4 fs
- [ 12.222107@1] EXT4-fs (data): couldn't mount as ext2 due to feature incompatibilities
- [ 12.222180@1] aml_nftl_open ok!
- [ 12.222250@1] force enable DISCARD here for ext4 fs
- [ 12.227820@1] checked enable EXT4 DISCARD here
- [ 12.227836@1] EXT4-fs (data): mounted filesystem with ordered data mode. Opts: (null)
- [ 12.434773@1] systemd[1]: System time before build time, advancing clock.
- [ 12.444459@1] systemd[1]: systemd 229 running in system mode. (-PAM -AUDIT -SELINUX -IMA -APPARMOR -SMACK -SYSVINIT -UTMP -LIBCRYPTSETUP -GCRYPT -GNUTLS -ACL -XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -IDN)
- [ 12.444686@1] systemd[1]: Detected architecture arm.
- [ 12.444826@1] systemd[1]: Running with unpopulated /etc.
- [ 12.444949@1] systemd[1]: Set hostname to <OpenELEC>.
- [ 12.445105@1] systemd[1]: Initializing machine ID from random generator.
- [ 12.496573@1] systemd[1]: Populated /etc with preset unit settings.
- [ 12.565843@1] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
- [ 12.566364@1] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
- [ 12.566647@1] systemd[1]: Created slice System Slice.
- [ 12.567021@1] systemd[1]: Reached target Paths.
- [ 12.567282@1] systemd[1]: Listening on Journal Socket.
- [ 12.572134@1] systemd[1]: Starting Load Kernel Modules...
- [ 12.573250@1] systemd[1]: Mounting Variable Directory...
- [ 12.582915@1] systemd[1]: Starting Remount Root and Kernel File Systems...
- [ 12.584534@1] systemd[1]: Starting Create list of required static device nodes for the current kernel...
- [ 12.585746@1] systemd[1]: Mounting Temporary Directory...
- [ 12.585853@1] systemd[1]: Reached target Swap.
- [ 12.587319@1] systemd[1]: Starting Setup machine-id...
- [ 12.587625@1] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
- [ 12.588945@1] systemd[1]: Mounting Debug File System...
- [ 12.590514@1] systemd[1]: Starting Show Version...
- [ 12.590773@1] systemd[1]: Created slice User and Session Slice.
- [ 12.590892@1] systemd[1]: Reached target Slices.
- [ 12.591117@1] systemd[1]: Listening on Journal Socket (/dev/log).
- [ 12.591319@1] systemd[1]: Listening on udev Kernel Socket.
- [ 12.591527@1] systemd[1]: Listening on udev Control Socket.
- [ 12.596318@1] systemd[1]: Mounting POSIX Message Queue File System...
- [ 12.603102@1] systemd[1]: Started Remount Root and Kernel File Systems.
- [ 12.625186@1] systemd[1]: Starting udev Coldplug all Devices...
- [ 12.676388@1] systemd[1]: Mounted Variable Directory.
- [ 12.676573@1] systemd[1]: Mounted Temporary Directory.
- [ 12.679856@1] systemd[1]: Started Create list of required static device nodes for the current kernel.
- [ 12.681646@1] systemd[1]: Starting Create Static Device Nodes in /dev...
- [ 12.684143@0] systemd[1]: Starting Setup Timezone data...
- [ 12.686996@0] systemd[1]: Mounted Debug File System.
- [ 12.687154@0] systemd[1]: Mounted POSIX Message Queue File System.
- [ 12.783889@0] systemd[1]: Started Setup machine-id.
- [ 12.784762@0] systemd[1]: Started Show Version.
- [ 12.785392@0] systemd[1]: Started Create Static Device Nodes in /dev.
- [ 12.810410@0] systemd[1]: Started Setup Timezone data.
- [ 12.812500@1] pdata->tmp_trip[0].gpu_lower_level=1
- [ 12.812511@1] pdata->tmp_trip[0].gpu_upper_level=1
- [ 12.812532@1] pdata->tmp_trip[1].gpu_lower_level=2
- [ 12.812537@1] pdata->tmp_trip[1].gpu_upper_level=2
- [ 12.812550@1] pdata->tmp_trip[2].gpu_lower_level=4
- [ 12.812555@1] pdata->tmp_trip[2].gpu_upper_level=4
- [ 12.812568@1] pdata->tmp_trip[3].gpu_lower_level=-1
- [ 12.812573@1] pdata->tmp_trip[3].gpu_upper_level=-1
- [ 12.812591@1] aml_thermal bind thermal-gpufreq-0 okay !
- [ 12.812597@1] gpu cooling register okay with err=0
- [ 12.822141@1] tmp_trip[0].gpu_core_upper=0
- [ 12.822169@1] tmp_trip[1].gpu_core_upper=0
- [ 12.822181@1] tmp_trip[2].gpu_core_upper=1
- [ 12.822193@1] tmp_trip[3].gpu_core_upper=-1
- [ 12.822206@1] aml_thermal bind thermal-gpucore-0 okay !
- [ 12.822212@1] gpu core cooling register okay with err=0
- [ 12.830044@1] Mali: Mali device driver loaded
- [ 12.839269@0] systemd[1]: Started Load Kernel Modules.
- [ 13.021835@0] systemd[1]: Starting Apply Kernel Variables...
- [ 13.022154@2] CPU2: Booted secondary processor
- [ 13.022676@0] systemd[1]: Reached target Local File Systems (Pre).
- [ 13.022818@0] systemd[1]: Reached target Local File Systems.
- [ 13.024803@0] systemd[1]: Starting Journal Service...
- [ 13.035775@2] systemd[1]: Started Apply Kernel Variables.
- [ 13.061978@2] systemd[1]: Started udev Coldplug all Devices.
- [ 13.163513@2] systemd[1]: Started Journal Service.
- [ 13.197311@0] systemd-journald[1687]: Received request to flush runtime journal from PID 1
- [ 14.021994@0] -----hotplug:2
- [ 14.062250@2] IRQ94 no longer affine to CPU2
- [ 14.062445@1] CPU2: shutdown
- [ 14.098088@0] Console: switching to colour dummy device 80x30
- [ 14.422197@2] CPU2: Booted secondary processor
- [ 14.486219@2] Triggered SDIO WiFi power on and bus rescan.
- [ 14.486233@2] wifi_setup_dt
- [ 14.486240@2] wifi_request_32k_clk : ON-->ON for sdio_wifi
- [ 14.486246@2] interrupt_pin(118) : (null)
- [ 14.486266@2] reg:2620,clearmask=100010,setmask=0
- [ 14.486272@2] reg:2622,clearmask=ff,set pin=118
- [ 14.486278@2] reg:2623,clearmask=70000,setmask=4
- [ 14.486283@2] interrupt_pin(118) : sdio_wifi
- [ 14.486288@2] power_on_pin(6) : (null)
- [ 14.486299@2] power_on_pin(6) : sdio_wifi
- [ 14.486304@2] power_on_pin2(108) : (null)
- [ 14.486314@2] power_on_pin2(108) : sdio_wifi
- [ 14.616189@0] cur_mode = 0
- [ 14.616203@0] [0x0] = 0x1dd0190
- [ 14.616209@0] [0x4] = 0xf800ca
- [ 14.616213@0] [0x8] = 0x82006e
- [ 14.616217@0] [0xc] = 0x3c0030
- [ 14.616222@0] [0x10] = 0x30fa0013
- [ 14.616226@0] [0x18] = 0x6f19000
- [ 14.616231@0] [0x1c] = 0x9f40
- [ 14.616235@0] [0x20] = 0x0
- [ 14.616239@0] [0x24] = 0x0
- [ 14.616243@0] [0x28] = 0x0
- [ 14.616248@0] set_remote_mode[69]
- [ 14.754398@1] pps_core: LinuxPPS API ver. 1 registered
- [ 14.754412@1] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
- [ 14.773232@1] mmcblk0: r/w command failed, status = 0x80000b00
- [ 14.773258@1] end_request: I/O error, dev mmcblk0, sector 1014776
- [ 14.773270@1] Buffer I/O error on device mmcblk0, logical block 126847
- [ 14.775318@1] mmcblk0: r/w command failed, status = 0x80000b00
- [ 14.775347@1] mmc_blk_reset 939 reset error md->reset_done:1 and type:1
- [ 14.775358@1] end_request: I/O error, dev mmcblk0, sector 1014776
- [ 14.775368@1] Buffer I/O error on device mmcblk0, logical block 126847
- [ 14.782730@0] usb 1-1.4: new high-speed USB device number 3 using dwc_otg
- [ 14.787420@1] PTP clock support registered
- [ 14.791978@2] WIFI Disable! 6
- [ 14.822184@3] CPU3: Booted secondary processor
- [ 14.859465@1] ethernet base addr is fe0c0000
- [ 14.862301@0] AO cpu stop ok.
- [ 14.862700@0] AO cpu runs ok.
- [ 14.883695@0] usb 1-1.4: New USB device found, idVendor=0bda, idProduct=8179
- [ 14.883714@0] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
- [ 14.883721@0] usb 1-1.4: Product: 802.11n WLAN NIC
- [ 14.883728@0] usb 1-1.4: Manufacturer: Realtek
- [ 14.930560@2] ret = 17
- [ 14.930560@2] print_buff=D0:76:58:01:35:0C
- [ 14.930652@2] DWMAC100
- [ 14.930668@2] stmmac - user ID: 0x10, Synopsys ID: 0x37
- [ 14.930677@2] Normal descriptors
- [ 14.930682@2] Ring mode enabled
- [ 14.930692@2] DMA HW capability register supported
- [ 14.930706@2] RX Checksum Offload Engine supported (type 2)
- [ 14.930716@2] TX Checksum insertion supported
- [ 14.930729@2] Wake-Up On Lan supported
- [ 14.930780@2] Enable RX Mitigation via HW Watchdog Timer
- [ 15.001181@2] libphy: stmmac: probed
- [ 15.001202@2] eth0: PHY ID 02430c54 at 0 IRQ POLL (stmmac-0:00) active
- [ 15.018635@0] aml_nftl_open ok!
- [ 15.020708@0] blktrans_ioctl -cmd: 5331,801c0204,64
- [ 15.027003@2] aml_nftl_open ok!
- [ 15.029272@0] aml_nftl_open ok!
- [ 15.030946@2] blktrans_ioctl -cmd: 5331,801c0204,64
- [ 15.031622@0] blktrans_ioctl -cmd: 5331,801c0204,64
- [ 15.036717@0] blktrans_ioctl -cmd: 5331,801c0204,64
- [ 15.065006@1] aml_nftl_open ok!
- [ 15.066196@1] blktrans_ioctl -cmd: 5331,801c0204,64
- [ 15.067245@1] aml_nftl_open ok!
- [ 15.068277@1] blktrans_ioctl -cmd: 5331,801c0204,64
- [ 15.101989@2] WIFI Enable! 6
- [ 15.115766@2] blktrans_ioctl -cmd: 5331,801c0204,64
- [ 15.233955@1] eth0: device MAC address d0:76:58:01:35:0c
- [ 15.317896@1] usb 1-1.4: USB disconnect, device number 3
- [ 15.326513@0] 8021q: 802.1Q VLAN Support v1.8
- [ 15.376656@2] cfg80211: Calling CRDA to update world regulatory domain
- [ 15.378420@2] cfg80211: World regulatory domain updated:
- [ 15.378438@2] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
- [ 15.378446@2] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (2000 mBi, 0 mBm)
- [ 15.378452@2] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (2000 mBi, 0 mBm)
- [ 15.378458@2] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (2000 mBi, 0 mBm)
- [ 15.378465@2] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (2000 mBi, 0 mBm)
- [ 15.378471@2] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (2000 mBi, 0 mBm)
- [ 15.378477@2] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (2000 mBi, 0 mBm)
- [ 15.378483@2] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (2000 mBi, 0 mBm)
- [ 15.378489@2] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm)
- [ 15.421353@3] stmmac: wakeup enable
- [ 15.532384@0] RTL871X: module init start
- [ 15.532404@0] RTL871X: rtl8188eu v4.3.0.9_15178.20150907
- [ 15.534252@0] usbcore: registered new interface driver rtl8188eu
- [ 15.534266@0] RTL871X: module init ret=0
- [ 15.583949@3] RTL871X: rtl8188eu driver version=v4.1.3_7379.20130503
- [ 15.583968@3] RTL871X: build time: Apr 27 2016 00:13:01
- [ 15.583980@3] Error: Driver 'rtl8188eu' is already registered, aborting...
- [ 15.928183@3] nftl _nand_discard, start sector=264856, length=8
- [ 15.928247@3] nftl _nand_discard, start sector=4726936, length=8
- [ 16.643857@1] IEC958 16bit
- [ 16.643873@1] hdmitx: audio: aout notify rate 48000
- [ 16.643879@1] hdmitx: audio: aout notify size 16
- [ 16.643883@1] hdmitx: audio: no update
- [ 16.643891@1] aml_i2s_close device type 8
- [ 16.669959@1] IEC958 16bit
- [ 16.669976@1] hdmitx: audio: aout notify rate 48000
- [ 16.669982@1] hdmitx: audio: aout notify size 16
- [ 16.669987@1] hdmitx: audio: no update
- [ 16.669994@1] aml_i2s_close device type 8
- [ 16.672871@1] IEC958 16bit
- [ 16.672885@1] hdmitx: audio: aout notify rate 48000
- [ 16.672890@1] hdmitx: audio: aout notify size 16
- [ 16.672895@1] hdmitx: audio: no update
- [ 16.672902@1] aml_i2s_close device type 8
- [ 16.674046@1] IEC958 16bit
- [ 16.674060@1] hdmitx: audio: aout notify rate 48000
- [ 16.674065@1] hdmitx: audio: aout notify size 16
- [ 16.674070@1] hdmitx: audio: no update
- [ 16.674077@1] aml_i2s_close device type 8
- [ 16.676263@1] IEC958 16bit
- [ 16.676276@1] hdmitx: audio: aout notify rate 48000
- [ 16.676282@1] hdmitx: audio: aout notify size 16
- [ 16.676287@1] hdmitx: audio: no update
- [ 16.676294@1] aml_i2s_close device type 8
- [ 16.678490@1] IEC958 16bit
- [ 16.678503@1] hdmitx: audio: aout notify rate 48000
- [ 16.678509@1] hdmitx: audio: aout notify size 16
- [ 16.678513@1] hdmitx: audio: no update
- [ 16.678519@1] aml_i2s_close device type 8
- [ 16.679421@1] IEC958 16bit
- [ 16.679434@1] hdmitx: audio: aout notify rate 48000
- [ 16.679439@1] hdmitx: audio: aout notify size 16
- [ 16.679444@1] hdmitx: audio: no update
- [ 16.679450@1] aml_i2s_close device type 8
- [ 16.681198@1] IEC958 16bit
- [ 16.681212@1] hdmitx: audio: aout notify rate 48000
- [ 16.681218@1] hdmitx: audio: aout notify size 16
- [ 16.681222@1] hdmitx: audio: no update
- [ 16.681229@1] aml_i2s_close device type 2
- [ 16.760357@3] buf=0
- [ 16.760371@3] IEC958_mode_raw=0
- [ 16.760414@3] IEC958_mode_codec= 0,IEC958 type 2 CH PCM
- [ 16.760421@3] last mode 0,now 0
- [ 16.767018@3] IEC958 16bit
- [ 16.767035@3] hdmitx: audio: aout notify rate 48000
- [ 16.767041@3] hdmitx: audio: aout notify size 16
- [ 16.767045@3] hdmitx: audio: no update
- [ 16.767053@3] aml_i2s_close device type 8
- [ 16.769231@3] IEC958 16bit
- [ 16.769246@3] hdmitx: audio: aout notify rate 48000
- [ 16.769251@3] hdmitx: audio: aout notify size 16
- [ 16.769255@3] hdmitx: audio: no update
- [ 16.769262@3] aml_i2s_close device type 8
- [ 16.770842@3] enter aml_asoc_hw_params stream: playback rate: 44100 format: 2
- [ 16.771019@3] [aml-i2s-dai]enterd aml_dai_i2s_prepare,old_samplerate:48000,sample_rate=44100
- [ 16.771035@3] [aml-i2s-dai]i2s dma f0782000,phy addr 2de00000,mode 0,ch 2
- [ 16.771041@3] ----aml_hw_iec958_init,runtime->rate=44100--
- [ 16.771048@3] [aml-spdif-dai]enterd aml_hw_iec958_init,set_clock:4,sample_rate=5
- [ 16.771053@3] audio_set_958_clk, freq=5,
- [ 16.771059@3] ----aml_hw_iec958_init,runtime->rate=44100,sample_rate=5--
- [ 16.771064@3] iec958 mode PCM16
- [ 16.771071@3] IEC958 16bit
- [ 16.771076@3] hdmitx: audio: aout notify rate 44100
- [ 16.771081@3] hdmitx: audio: aout notify size 16
- [ 16.771089@3] hdmitx: audio: audio channel num is 1
- [ 16.771098@3] hdmitx: audio: SPDIF
- [ 16.771109@3] hdmitx: audio: current VIC: 16
- [ 16.771113@3] hdmitx: audio: audio sample rate: 2
- [ 16.771118@3] hdmitx: audio: reset audio N para
- [ 16.771128@3] hdmitx: audio: PCM out to HDMI
- [ 16.771133@3] hdmitx: audio: i2s_to_spdif_flag:1
- [ 16.771137@3] hdmitx: audio: Enable audio spdif to HDMI
- [ 16.771144@3] hdmitx: audio: Audio Type: PCM
- [ 16.771187@3] hdmitx: audio: set audio param
- [ 16.771192@3] [aml-spdif-dai]spdif dma f0782000,phy addr 2de00000
- [ 16.771279@3] speaker_events--mute =1
- [ 16.774263@2] [aml-i2s-dai]i2s dma f0782000,phy addr 2de00000,mode 0,ch 2
- [ 16.774276@2] ----aml_hw_iec958_init,runtime->rate=44100--
- [ 16.774282@2] ----aml_hw_iec958_init,runtime->rate=44100,sample_rate=5--
- [ 16.774288@2] iec958 mode PCM16
- [ 16.774299@2] IEC958 16bit
- [ 16.774306@2] hdmitx: audio: aout notify rate 44100
- [ 16.774311@2] hdmitx: audio: aout notify size 16
- [ 16.774315@2] hdmitx: audio: no update
- [ 16.774320@2] [aml-spdif-dai]spdif dma f0782000,phy addr 2de00000
- [ 16.782859@2] [aml-i2s-dai]aiu i2s playback enable
- [ 16.782859@2]
- [ 16.782880@2] [aml-i2s-dai]audio_hw_958_enable 1
- [ 17.077368@1] tvmode set to 1080p
- [ 17.077389@1] don't set the same mode as current.
- [ 16.171983@3] [aml_sdio_timeout] time_start_cnt:993
- [ 16.171983@3] [aml_sdio_print_err] sdio: Timeout error, Cmd52 arg 0xc00, Xfer 0 Bytes, host->xfer_step=12, host->cmd_is_stop=0, pdata->port=0, virqs=0x13, virqc=0x1f001f00, conf->cmd_clk_divide=199, pdata->clkc=199, conf->bus_width=0, pdata->width=0, conf=0x416270c7, clock=398437
- [ 16.171983@3]
- [ 17.171987@3] [aml_sdio_timeout] time_start_cnt:999
- [ 17.171987@3] <7>[ 17.521983@1] -----hotplug:2
- [ 17.602274@2] IRQ94 no longer affine to CPU2
- [ 17.602503@1] CPU2: shutdown
- [ 17.682293@3] IRQ95 no longer affine to CPU3
- [ 17.682519@1] CPU3: shutdown
- [ 17.832151@1] libphy: stmmac-0:00 - Link is Up - 100/Full
- [ 17.832174@1] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
- [ 17.929549@0] hdmitx: cec: Set PWM_E out put RTC 32K!
- [ 17.929573@0] hdmitx: cec: enable:int mask:0x6
- [ 17.932694@0] CEC: tx msg len: 1 dat: f0
- [ 18.040365@0] nftl _nand_discard, start sector=4727040, length=8
- [ 18.093662@0] systemd-journald[1687]: Retention time reached.
- [ 18.117106@0] [amlogic_cec] amlogic_cec_irq_handler(): cec msg status: rx: 0x0; tx: 0x3
- [ 18.117463@0] hdmitx: cec: TX ERROR!!!
- [ 18.117829@0] [amlogic] ##### cec write error! #####
- [ 18.118872@0] CEC: tx msg len: 1 dat: f0
- [ 17.172015@1] [aml_sdio_print_err] sdio: Timeout error, Cmd52 arg 0x80000c08, Xfer 0 Bytes, host->xfer_step=12, host->cmd_is_stop=0, pdata->port=0, virqs=0x13, virqc=0x3f001f00, conf->cmd_clk_divide=199, pdata->clkc=199, conf->bus_width=0, pdata->width=0, conf=0x416270c7, clock=398437
- [ 17.172015@1]
- [ 18.171987@1] [aml_sdio_timeout] time_start_cnt:996
- [ 18.171987@1] <6>[ 18.294834@0] [amlogic_cec] amlogic_cec_irq_handler(): cec msg status: rx: 0x0; tx: 0x3
- [ 18.295194@0] hdmitx: cec: TX ERROR!!!
- [ 18.295554@0] [amlogic] ##### cec write error! #####
- [ 18.297024@0] CEC: tx msg len: 1 dat: 44
- [ 18.322206@2] CPU2: Booted secondary processor
- [ 18.339263@0] [amlogic_cec] amlogic_cec_irq_handler(): cec msg status: rx: 0x0; tx: 0x2
- [ 18.353229@0] CEC: tx msg len: 1 dat: 88
- [ 18.517028@0] [amlogic_cec] amlogic_cec_irq_handler(): cec msg status: rx: 0x0; tx: 0x3
- [ 18.517384@0] hdmitx: cec: TX ERROR!!!
- [ 18.517761@0] [amlogic] ##### cec write error! #####
- [ 18.518794@0] CEC: tx msg len: 1 dat: 88
- [ 18.694758@0] [amlogic_cec] amlogic_cec_irq_handler(): cec msg status: rx: 0x0; tx: 0x3
- [ 18.694787@1] [amlogic] ##### cec write error! #####
- [ 18.695116@0] hdmitx: cec: TX ERROR!!!
- [ 18.695455@1] [amlogic_cec] amlogic_cec_ioctl(): amlogic_cec_ioctl: Set logical address: 8
- [ 18.695577@1] [amlogic_cec] amlogic_cec_ioctl(): amlogic_cec_ioctl: return physical address 0x1000
- [ 18.697168@1] CEC: tx msg len: 5 dat: 8f 84 10 00 04
- [ 18.835044@0] [amlogic_cec] amlogic_cec_irq_handler(): cec msg status: rx: 0x0; tx: 0x2
- [ 18.836750@1] CEC: tx msg len: 1 dat: 80
- [ 19.012801@0] [amlogic_cec] amlogic_cec_irq_handler(): cec msg status: rx: 0x0; tx: 0x3
- [ 19.012829@1] [amlogic] ##### cec write error! #####
- [ 19.013156@0] hdmitx: cec: TX ERROR!!!
- [ 19.033197@1] CEC: tx msg len: 1 dat: 80
- [ 18.172014@0] [aml_sdio_print_err] sdio: Timeout error, Cmd8 arg 0x1aa, Xfer 0 Bytes, host->xfer_step=12, host->cmd_is_stop=0, pdata->port=0, virqs=0x13, virqc=0x3f001f00, conf->cmd_clk_divide=199, pdata->clkc=199, conf->bus_width=0, pdata->width=0, conf=0x416270c7, clock=398437
- [ 18.172014@0]
- [ 19.172158@0] [aml_sdio_timeout] time_start_cnt:999
- [ 19.172158@0] <6>[ 19.196096@0] [amlogic_cec] amlogic_cec_irq_handler(): cec msg status: rx: 0x0; tx: 0x3
- [ 19.196454@0] hdmitx: cec: TX ERROR!!!
- [ 19.196875@0] [amlogic] ##### cec write error! #####
- [ 19.198079@0] CEC: tx msg len: 1 dat: 80
- [ 19.373826@0] [amlogic_cec] amlogic_cec_irq_handler(): cec msg status: rx: 0x0; tx: 0x3
- [ 19.374181@0] hdmitx: cec: TX ERROR!!!
- [ 19.374557@0] [amlogic] ##### cec write error! #####
- [ 19.375589@0] CEC: tx msg len: 1 dat: 80
- [ 19.551556@0] [amlogic_cec] amlogic_cec_irq_handler(): cec msg status: rx: 0x0; tx: 0x3
- [ 19.551583@1] [amlogic] ##### cec write error! #####
- [ 19.551915@0] hdmitx: cec: TX ERROR!!!
- [ 19.554052@1] CEC: tx msg len: 1 dat: 80
- [ 19.729290@0] [amlogic_cec] amlogic_cec_irq_handler(): cec msg status: rx: 0x0; tx: 0x3
- [ 19.729644@0] hdmitx: cec: TX ERROR!!!
- [ 19.730037@0] [amlogic] ##### cec write error! #####
- [ 19.731146@0] CEC: tx msg len: 1 dat: 80
- [ 19.907020@0] [amlogic_cec] amlogic_cec_irq_handler(): cec msg status: rx: 0x0; tx: 0x3
- [ 19.907050@1] [amlogic] ##### cec write error! #####
- [ 19.907379@0] hdmitx: cec: TX ERROR!!!
- [ 19.923624@1] CEC: tx msg len: 4 dat: 8f 82 10 00
- [ 20.025097@0] [amlogic_cec] amlogic_cec_irq_handler(): cec msg status: rx: 0x0; tx: 0x2
- [ 20.032720@0] CEC: tx msg len: 1 dat: 80
- [ 20.202865@0] [amlogic_cec] amlogic_cec_irq_handler(): cec msg status: rx: 0x0; tx: 0x3
- [ 20.203244@0] hdmitx: cec: TX ERROR!!!
- [ 20.204033@0] [amlogic] ##### cec write error! #####
- [ 20.205469@0] CEC: tx msg len: 1 dat: 80
- [ 20.380590@0] [amlogic_cec] amlogic_cec_irq_handler(): cec msg status: rx: 0x0; tx: 0x3
- [ 20.380945@0] hdmitx: cec: TX ERROR!!!
- [ 20.381365@0] [amlogic] ##### cec write error! #####
- [ 20.576437@0] AO cpu stop ok.
- [ 20.576817@0] AO cpu runs ok.
- [ 19.172188@0] [aml_sdio_print_err] sdio: Timeout error, Cmd5 arg 0x0, Xfer 0 Bytes, host->xfer_step=12, host->cmd_is_stop=0, pdata->port=0, virqs=0x13, virqc=0x3f001f00, conf->cmd_clk_divide=199, pdata->clkc=199, conf->bus_width=0, pdata->width=0, conf=0x416270c7, clock=398437
- [ 19.172188@0] [aml_sdio_timeout] time_start_cnt:999
- [ 19.172188@0] [aml_sdio_print_err] sdio: Timeout error, Cmd55 arg 0x0, Xfer 0 Bytes, host->xfer_step=12, host->cmd_is_stop=0, pdata->port=0, virqs=0x13, virqc=0x1f001f00, conf->cmd_clk_divide=199, pdata->clkc=199, conf->bus_width=0, pdata->width=0, conf=0x416270c7, clock=398437
- [ 19.172188@0] AO cpu stop ok.
- [ 20.577480@0] AO cpu runs ok.
- [ 21.383055@0] CEC: tx msg len: 1 dat: 80
- [ 21.545951@0] [amlogic_cec] amlogic_cec_irq_handler(): cec msg status: rx: 0x0; tx: 0x3
- [ 21.545986@1] [amlogic] ##### cec write error! #####
- [ 21.546308@0] hdmitx: cec: TX ERROR!!!
- [ 21.564391@1] CEC: tx msg len: 1 dat: 80
- [ 21.621979@1] -----hotplug:2
- [ 21.630563@0] nftl _nand_discard, start sector=264952, length=8
- [ 21.630607@0] nftl _nand_discard, start sector=4722936, length=8
- [ 21.630637@0] nftl _nand_discard, start sector=264864, length=16
- [ 21.672267@2] IRQ94 no longer affine to CPU2
- [ 21.672507@1] CPU2: shutdown
- [ 21.717096@1] nftl _nand_discard, start sector=4739072, length=24
- [ 21.727285@0] [amlogic_cec] amlogic_cec_irq_handler(): cec msg status: rx: 0x0; tx: 0x3
- [ 21.727311@1] [amlogic] ##### cec write error! #####
- [ 21.727639@0] hdmitx: cec: TX ERROR!!!
- [ 21.782825@1] nftl _nand_discard, start sector=270352, length=24
- [ 21.897630@1] nftl _nand_discard, start sector=270376, length=24
- [ 22.045075@0] nftl _nand_discard, start sector=270400, length=96
- [ 21.172119@1] [aml_sdio_timeout] time_start_cnt:999
- [ 21.172119@1] [aml_sdio_print_err] sdio: Timeout error, Cmd55 arg 0x0, Xfer 0 Bytes, host->xfer_step=12, host->cmd_is_stop=0, pdata->port=0, virqs=0x13, virqc=0x1f003f00, conf->cmd_clk_divide=199, pdata->clkc=199, conf->bus_width=0, pdata->width=0, conf=0x416270c7, clock=398437
- [ 21.172119@1]
- [ 22.172002@1] [aml_sdio_timeout] time_start_cnt:999
- [ 22.172002@1] <7>[ 22.305830@0] nftl _nand_discard, start sector=270496, length=24
- [ 22.362514@0] nftl _nand_discard, start sector=270520, length=24
- [ 22.728576@0] CEC: tx msg len: 1 dat: 80
- [ 22.891469@0] [amlogic_cec] amlogic_cec_irq_handler(): cec msg status: rx: 0x0; tx: 0x3
- [ 22.891824@0] hdmitx: cec: TX ERROR!!!
- [ 22.892214@0] [amlogic] ##### cec write error! #####
- [ 22.893262@0] CEC: tx msg len: 1 dat: 80
- [ 23.013828@0] nftl _nand_discard, start sector=270544, length=24
- [ 23.069200@0] [amlogic_cec] amlogic_cec_irq_handler(): cec msg status: rx: 0x0; tx: 0x3
- [ 23.069526@0] hdmitx: cec: TX ERROR!!!
- [ 23.069884@0] [amlogic] ##### cec write error! #####
- [ 24.071127@0] CEC: tx msg len: 1 dat: 80
- [ 22.172028@1] [aml_sdio_print_err] sdio: Timeout error, Cmd55 arg 0x0, Xfer 0 Bytes, host->xfer_step=12, host->cmd_is_stop=0, pdata->port=0, virqs=0x13, virqc=0x3f003f00, conf->cmd_clk_divide=199, pdata->clkc=199, conf->bus_width=0, pdata->width=0, conf=0x416270c7, clock=398437
- [ 22.172028@1] [aml_sdio_timeout] time_start_cnt:999
- [ 22.172028@1] [aml_sdio_print_err] sdio: Timeout error, Cmd55 arg 0x0, Xfer 0 Bytes, host->xfer_step=12, host->cmd_is_stop=0, pdata->port=0, virqs=0x13, virqc=0x3f003f00, conf->cmd_clk_divide=199, pdata->clkc=199, conf->bus_width=0, pdata->width=0, conf=0x416270c7, clock=398437
- [ 22.172028@1] [aml_sdio_timeout] time_start_cnt:999
- [ 24.234023@0] [amlogic_cec] amlogic_cec_irq_handler(): cec msg status: rx: 0x0; tx: 0x3
- [ 24.234378@0] hdmitx: cec: TX ERROR!!!
- [ 24.234757@0] [amlogic] ##### cec write error! #####
- [ 24.235787@0] CEC: tx msg len: 1 dat: 80
- [ 24.411752@0] [amlogic_cec] amlogic_cec_irq_handler(): cec msg status: rx: 0x0; tx: 0x3
- [ 24.412107@0] hdmitx: cec: TX ERROR!!!
- [ 24.412507@0] [amlogic] ##### cec write error! #####
- [ 25.413770@0] CEC: tx msg len: 1 dat: 80
- [ 25.576667@0] [amlogic_cec] amlogic_cec_irq_handler(): cec msg status: rx: 0x0; tx: 0x3
- [ 25.577021@0] hdmitx: cec: TX ERROR!!!
- [ 25.577399@0] [amlogic] ##### cec write error! #####
- [ 25.578430@0] CEC: tx msg len: 1 dat: 80
- [ 25.754397@0] [amlogic_cec] amlogic_cec_irq_handler(): cec msg status: rx: 0x0; tx: 0x3
- [ 25.754752@0] hdmitx: cec: TX ERROR!!!
- [ 25.755119@0] [amlogic] ##### cec write error! #####
- [ 26.756354@1] CEC: tx msg len: 1 dat: 80
- [ 26.919247@0] [amlogic_cec] amlogic_cec_irq_handler(): cec msg status: rx: 0x0; tx: 0x3
- [ 26.919283@1] [amlogic] ##### cec write error! #####
- [ 26.919603@0] hdmitx: cec: TX ERROR!!!
- [ 26.933219@1] CEC: tx msg len: 1 dat: 80
- [ 27.096984@0] [amlogic_cec] amlogic_cec_irq_handler(): cec msg status: rx: 0x0; tx: 0x3
- [ 27.097014@1] [amlogic] ##### cec write error! #####
- [ 27.097343@0] hdmitx: cec: TX ERROR!!!
- [ 25.211981@1] [aml_sdio_timeout] time_start_cnt:999
- [ 25.211981@1] [aml_sdio_print_err] sdio: Timeout error, Cmd52 arg 0xc00, Xfer 0 Bytes, host->xfer_step=12, host->cmd_is_stop=0, pdata->port=0, virqs=0x13, virqc=0x3f003f00, conf->cmd_clk_divide=265, pdata->clkc=265, conf->bus_width=0, pdata->width=0, conf=0x41627109, clock=299577
- [ 25.211981@1] [aml_sdio_timeout] time_start_cnt:999
- [ 25.211981@1] [aml_sdio_print_err] sdio: Timeout error, Cmd52 arg 0x80000c08, Xfer 0 Bytes, host->xfer_step=12, host->cmd_is_stop=0, pdata->port=0, virqs=0x13, virqc=0x3f003f00, conf->cmd_clk_divide=265, pdata->clkc=265, conf->bus_width=0, pdata->width=0, conf=0x41627109, clock=299577
- [ 25.211981@1]
- [ 27.211985@1] [aml_sdio_timeout] time_start_cnt:996
- [ 27.211985@1] CEC: tx msg len: 1 dat: 80
- [ 28.164091@0] nftl _nand_discard, start sector=270568, length=104
- [ 28.261084@0] [amlogic_cec] amlogic_cec_irq_handler(): cec msg status: rx: 0x0; tx: 0x3
- [ 28.261439@0] hdmitx: cec: TX ERROR!!!
- [ 28.261832@0] [amlogic] ##### cec write error! #####
- [ 28.263396@0] CEC: tx msg len: 1 dat: 80
- [ 28.438852@0] [amlogic_cec] amlogic_cec_irq_handler(): cec msg status: rx: 0x0; tx: 0x3
- [ 28.439269@0] hdmitx: cec: TX ERROR!!!
- [ 28.439723@0] [amlogic] ##### cec write error! #####
- OpenELEC:~ #
- OpenELEC:~ # lsmod
- Module Size Used by
- 8188eu 962986 0
- cfg80211 205770 1 8188eu
- 8021q 16347 0
- cbc 2038 0
- stmmac 66081 0
- ptp 6996 1 stmmac
- pps_core 5786 1 ptp
- wifi_dummy 590 0
- mali 156204 1
- fbcon 35121 0
- font 7003 1 fbcon
- bitblit 3823 1 fbcon
- softcursor 928 1 bitblit
- OpenELEC:~ #
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement