API tools faq
paste
Guest User

ForceWare 1.1r11

a guest
Jan 17th, 2015
74
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 20.48 KB | None | 0 0
raw download clone embed print report
  1. ¦¦¦¦Flash: 16 MB
  2. Starting LZMA Uncompression Algorithm.
  3. Compressed file is LZMA format.
  4. Linux version 2.6.18_pro500 ([email protected]) (gcc version 4.2.0 TI-Puma5 20100224) #218 PREEMPT Tue Jan 25 15:15:57 EST 2011
  5. CPU: ARMv6-compatible processor [410fb764] revision 4 (ARMv6TEJ), cr=00c538ff
  6. Machine: puma5
  7. Ignoring unrecognised tag 0x00000000
  8. Memory policy: ECC disabled, Data cache writethrough
  9. Reserved 1024k DSP memory starting from Physical 0x83f00000
  10. CPU0: D VIPT write-back cache
  11. CPU0: I cache: 32768 bytes, associativity 4, 32 byte lines, 256 sets
  12. CPU0: D cache: 16384 bytes, associativity 4, 32 byte lines, 128 sets
  13. Real-Time Preemption Support (C) 2004-2006 Ingo Molnar
  14. Built 1 zonelists. Total pages: 16128
  15. Kernel command line: root=/dev/mtdblock3 mtdparts=spansion:0x20000(U-Boot)ro,0x10000(env1),0x10000(env2),0x2d0000@0xf0000(fWare-FS),0x50000@0x7B0000(nvram),0x3B0000@0x40000(UBFI1),0x3B0000@0x3F0000(UBFI2) console=ttyS0,115200n8
  16. WARNING: experimental RCU implementation.
  17. Interrupt controller revision : 4e822100
  18. PID hash table entries: 256 (order: 8, 1024 bytes)
  19. Power & Sleep Controller @ 0xd8621000 Initialized [id-0x44822905]
  20. USB PHY POR Bypass enabled
  21. WARN: boardtype variable was not set, using default (tnetc550)
  22. Board type: tnetc550
  23. Initialized Peripheral Port Remap Register to base : 0x50000000
  24. Puma5 Timer0 initialized
  25. Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
  26. Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
  27. Memory: 63MB = 63MB total
  28. Memory: 61896KB available (1600K code, 337K data, 72K init)
  29. Mount-cache hash table entries: 512
  30. CPU: Testing write buffer coherency: ok
  31. NET: Registered protocol family 16
  32. PAL_cppi4Init : There is a room for 1314 more descriptors
  33. Off chip memory allocated: 349184
  34. QMgr Init: buffer after alignment: 83e00000
  35. avalanche_ppd_init: PP system initialized successfully.
  36. avalanche_ppd_init(729):return code 0x00
  37. HIL Core: Profile static has been Loaded.
  38. NET: Registered protocol family 2
  39. IP route cache hash table entries: 512 (order: -1, 2048 bytes)
  40. TCP established hash table entries: 2048 (order: 4, 65536 bytes)
  41. TCP bind hash table entries: 1024 (order: 2, 28672 bytes)
  42. TCP: Hash tables configured (established 2048 bind 1024)
  43. TCP reno registered
  44. squashfs: version 3.3 (2007/10/31) Phillip Lougher
  45. squashfs: LZMA suppport for slax.org by jro
  46. JFFS2 version 2.2. (NAND) (C) 2001-2006 Red Hat, Inc.
  47. io scheduler noop registered (default)
  48. watchdog: TI Avalanche Watchdog Timer: timer margin 42 sec
  49. TI LED driver initialized [major=254]
  50. Serial: 8250/16550 driver $Revision: 1.90 $ 2 ports, IRQ sharing disabled
  51. serial8250: ttyS0 at MMIO map 0x8610f03 mem 0xd8610f03 (irq = 8) is a TI 16550A
  52. serial8250: ttyS1 at MMIO map 0x8610e03 mem 0xd8610e03 (irq = 7) is a TI 16550A
  53. loop: loaded (max 8 devices)
  54. Loading cpgmac driver for puma5
  55. Cpmac: Error getting mac from Boot enviroment for eth0
  56. Cpmac: Using default mac address: 08.00.28.32.06.02
  57. Pass kernel parameter ethaddr0=xx.xx.xx.xx.xx.xx
  58. to set mac address
  59. TI CPGMAC_F Linux DDA version 0.1 - CPGMAC_F DDC version 0.2
  60. Cpmac: Installed 1 instances.
  61. Cpmac driver is allocating buffer memory at init time.
  62. i2c /dev entries driver
  63. Serial Flash [Bus:0 CS:0] : s25fl128p 16384KB, 256 sectors each 64KB
  64. 7 cmdlinepart partitions found on MTD device spansion
  65. partitions[0] = {.name = U-Boot, .offset = 0x00000000,.size = 0x00020000 (128K) }
  66. partitions[1] = {.name = env1, .offset = 0x00020000,.size = 0x00010000 (64K) }
  67. partitions[2] = {.name = env2, .offset = 0x00030000,.size = 0x00010000 (64K) }
  68. partitions[3] = {.name = fWare-FS, .offset = 0x000f0000,.size = 0x002d0000 (2880K) }
  69. partitions[4] = {.name = nvram, .offset = 0x007b0000,.size = 0x00050000 (320K) }
  70. partitions[5] = {.name = UBFI1, .offset = 0x00040000,.size = 0x003b0000 (3776K) }
  71. partitions[6] = {.name = UBFI2, .offset = 0x003f0000,.size = 0x003b0000 (3776K) }
  72. Creating 7 MTD partitions on "spansion":
  73. 0x00000000-0x00020000 : "U-Boot"
  74. 0x00020000-0x00030000 : "env1"
  75. 0x00030000-0x00040000 : "env2"
  76. 0x000f0000-0x003c0000 : "fWare-FS"
  77. 0x007b0000-0x00800000 : "nvram"
  78. 0x00040000-0x003f0000 : "UBFI1"
  79. 0x003f0000-0x007a0000 : "UBFI2"
  80. Serial Flash [Bus:0 CS:1] : No device found
  81. ti_spi.0: AVALANCHE SPI Controller driver at 0xd8612500 (irq = 0)
  82. ti_codec_spi.0: TI Codec SPI Controller driver at 0xd86040c8 (irq = 0)
  83. TCP bic registered
  84. NET: Registered protocol family 1
  85. NET: Registered protocol family 17
  86. VFS: Mounted root (squashfs filesystem) readonly.
  87. Freeing init memory: 72K
  88. jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00040000: 0x2705 instead
  89. jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00040004: 0xf376 instead
  90. jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00040008: 0x4de8 instead
  91. jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00040018: 0x2c76 instead
  92. jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0004001c: 0x0507 instead
  93. jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00040020: 0x666f instead
  94. jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00040024: 0x6557 instead
  95. jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00040028: 0x6500 instead
  96. jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00040048: 0x0a65 instead
  97. jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0004004c: 0x6f0a instead
  98. Further such events for this erase block will not be printed
  99. Cowardly refusing to erase blocks on filesystem with no valid JFFS2 nodes
  100. empty_blocks 4, bad_blocks 0, c->nr_blocks 5
  101.  
  102. ____________________________________________________________________________
  103. ____________________________________________________________________________
  104. __ __ __
  105. / _| ___ _ __ ___ __\ \ / /_ _ _ __ ___
  106. | |_ / _ \| `_// _// _ \ \ /\ / / _` | `__/ _ \
  107. | _| (_) | | | (_| __/\ V V / (_| | | | __/
  108. |_| \___/|_| \___\___| \_/\_/ \__,_|_| \___| (v1.1r11) by mforce
  109. ____________________________________________________________________________
  110. ____________________________________________________________________________
  111.  
  112.  
  113.  
  114.  
  115. mkdir: can't create directory '/nvram/fw': Read-only file system
  116. mkdir: can't create directory '/nvram/fw/bpi': No such file or directory
  117. ln: /nvram/1/security/fw_cert.cer: No such file or directory
  118. ln: /nvram/1/security/fw_key_prv.bin: No such file or directory
  119. touch: /nvram/fw/spf.cfg: No such file or directory
  120. /etc/init.d/rcS: line 99: can't create /nvram/fw/passwd: nonexistent directory
  121. /etc/init.d/rcS: line 104: can't create /nvram/fw/shadow: nonexistent directory
  122. /etc/init.d/rcS: line 109: can't create /nvram/fw/.htpasswd: nonexistent directory
  123. ln: /var/tmp/fw/security: File exists
  124. ln: /var/tmp/fw/security: File exists
  125. ln: /var/tmp/fw/security: File exists
  126. ln: /var/tmp/fw/security: File exists
  127. ln: /var/tmp/fw/security: File exists
  128. ln: /var/tmp/fw/security: File exists
  129. Using DOCSIS Initialization process parameters: -ds_channels 4 -us_channels 4
  130. killall: dropbear: no process killed
  131. killall: lighttpd: no process killed
  132. killall: mf_chk_dhcpd: no process killed
  133. killall: udhcpd: no process killed
  134. <@forceWare:/> pcd: Starting TI Process Control Daemon.
  135. pcd: Loaded 52 rules.
  136. pcd: Initialization complete.
  137. pcd: Starting process /usr/sbin/watchdog_rt (Rule SYSTEM_WATCHDOG).
  138. pcd: Starting process /usr/sbin/gptimer (Rule SYSTEM_GPTIMER).
  139. pcd: Starting process /usr/sbin/gim (Rule SYSTEM_GIM).
  140. TI Watchdog-RT daemon started <kick interval = 10 seconds>
  141. pcd: Rule SYSTEM_WATCHDOG: Success (Process /usr/sbin/watchdog_rt (169)).
  142. main:707 (pid=170): Initialized successfully, timer tick 50ms
  143. gim_init:135 (pid=171): GIM initializing...
  144. pcd: Rule SYSTEM_GPTIMER: Success (Process /usr/sbin/gptimer (170)).
  145. gim_init:176 (pid=171): GIM initialization complete. GIM_MODULE=3086
  146. pcd: Rule SYSTEM_GIM: Success (Process /usr/sbin/gim (171)).
  147. pcd: Rule SYSTEM_LASTRULE: Success.
  148. pcd: Starting process echo (Rule DOCSIS_APPRUN).
  149. pcd: Rule DOCSIS_APPRUN: Success (Process echo (173)).
  150. pcd: Starting process /usr/sbin/docsis_init_once (Rule DOCSIS_INITONCE).
  151. init_shm:209 (pid=174): Failed to create /nvram//1, Read-only file system
  152. ProductionDb_GetParamFromNvram:1834 (pid=174): Get CM Mac Address from NVRAM failed with error number -2
  153. init_shm:209 (pid=174): Failed to create /nvram//1, Read-only file system
  154. ProductionDb_GetParamFromNvram:1834 (pid=174): Get CM Host IP from NVRAM failed with error number -2
  155. init_shm:209 (pid=174): Failed to create /nvram//1, Read-only file system
  156. ProductionDb_GetParamFromNvram:1834 (pid=174): Get CM Lan MAC from NVRAM failed with error number -2
  157. init_shm:209 (pid=174): Failed to create /nvram//1, Read-only file system
  158. ProductionDb_GetParamFromNvram:1834 (pid=174): Get CM Lan IP from NVRAM failed with error number -2
  159. init_shm:209 (pid=174): Failed to create /nvram//1, Read-only file system
  160. ProductionDb_GetParamFromNvram:1834 (pid=174): Get CM Lan Mask from NVRAM failed with error number -2
  161. init_shm:209 (pid=174): Failed to create /nvram//1, Read-only file system
  162. ProductionDb_GetParamFromNvram:1834 (pid=174): Get CM USB Host MAC from NVRAM failed with error number -2
  163. init_shm:209 (pid=174): Failed to create /nvram//1, Read-only file system
  164. ProductionDb_GetParamFromNvram:1834 (pid=174): Get CM USB Device MAC from NVRAM failed with error number -2
  165. init_shm:209 (pid=174): Failed to create /nvram//1, Read-only file system
  166. ProductionDb_GetParamFromNvram:1834 (pid=174): Get CM PGA type from NVRAM failed with error number -2
  167. init_shm:209 (pid=174): Failed to create /nvram//1, Read-only file system
  168. ProductionDb_GetParamFromNvram:1834 (pid=174): Get CM TOP table from NVRAM failed with error number -2
  169. init_shm:209 (pid=174): Failed to create /nvram//1, Read-only file system
  170. ProductionDb_GetParamFromNvram:1834 (pid=174): Get CM Tuner type from NVRAM failed with error number -2
  171. init_shm:209 (pid=174): Failed to create /nvram//1, Read-only file system
  172. ProductionDb_GetParamFromNvram:1834 (pid=174): Get CM Root Public Valid from NVRAM failed with error number -2
  173. init_shm:209 (pid=174): Failed to create /nvram//1, Read-only file system
  174. ProductionDb_GetParamFromNvram:1834 (pid=174): Get CM Root Public Length from NVRAM failed with error number -2
  175. init_shm:209 (pid=174): Failed to create /nvram//1, Read-only file system
  176. ProductionDb_GetParamFromNvram:1834 (pid=174): Get CM Baud Rate from NVRAM failed with error number -2
  177. init_shm:209 (pid=174): Failed to create /nvram//1, Read-only file system
  178. ProductionDb_GetParamFromNvram:1834 (pid=174): Get CM Frequency Plan from NVRAM failed with error number -2
  179. init_shm:209 (pid=174): Failed to create /nvram//1, Read-only file system
  180. ProductionDb_GetParamFromNvram:1834 (pid=174): Get CM Production Date from NVRAM failed with error number -2
  181. init_shm:209 (pid=174): Failed to create /nvram//1, Read-only file system
  182. ProductionDb_GetParamFromNvram:1834 (pid=174): Get CM Rng Holdoff Class Id from NVRAM failed with error number -2
  183. init_shm:209 (pid=174): Failed to create /nvram//1, Read-only file system
  184. ProductionDb_GetParamFromNvram:1834 (pid=174): Get CM HW Revision from NVRAM failed with error number -2
  185. init_shm:209 (pid=174): Failed to create /nvram//1, Read-only file system
  186. ProductionDb_GetParamFromNvram:1834 (pid=174): Get CM HW Patch from NVRAM failed with error number -2
  187. init_shm:209 (pid=174): Failed to create /nvram//1, Read-only file system
  188. ProductionDb_GetParamFromNvram:1834 (pid=174): Get CM Serial Number from NVRAM failed with error number -2
  189. init_shm:209 (pid=174): Failed to create /nvram//1, Read-only file system
  190. ProductionDb_GetParamFromNvram:1834 (pid=174): Get CM Interface Name from NVRAM failed with error number -2
  191. init_shm:209 (pid=174): Failed to create /nvram//1, Read-only file system
  192. ProductionDb_GetParamFromNvram:1834 (pid=174): Get CM MIB level from NVRAM failed with error number -2
  193. init_shm:209 (pid=174): Failed to create /nvram//1, Read-only file system
  194. ProductionDb_GetParamFromNvram:1834 (pid=174): Get CM PHY Regs from NVRAM failed with error number -2
  195. init_shm:209 (pid=174): Failed to create /nvram//1, Read-only file system
  196. ProductionDb_GetParamFromNvram:1834 (pid=174): Get CM Number Of Tuners from NVRAM failed with error number -2
  197. init_shm:209 (pid=174): Failed to create /nvram//1, Read-only file system
  198. ProductionDb_GetParamFromNvram:1834 (pid=174): Get CM DOCSIS PHY Fact from NVRAM failed with error number -2
  199. init_shm:209 (pid=174): Failed to create /nvram//1, Read-only file system
  200. ProductionDb_GetParamFromNvram:1834 (pid=174): Get CM Mfg Org Name from NVRAM failed with error number -2
  201. init_shm:209 (pid=174): Failed to create /nvram//1, Read-only file system
  202. ProductionDb_GetParamFromNvram:1834 (pid=174): Get CM Mfg Org Name Len from NVRAM failed with error number -2
  203. init_shm:209 (pid=174): Failed to create /nvram//1, Read-only file system
  204. ProductionDb_GetParamFromNvram:1834 (pid=174): Get CM Euro Cer File Name from NVRAM failed with error number -2
  205. init_shm:209 (pid=174): Failed to create /nvram//1, Read-only file system
  206. ProductionDb_GetParamFromNvram:1834 (pid=174): Get CM Euro Key File Name from NVRAM failed with error number -2
  207. init_shm:209 (pid=174): Failed to create /nvram//1, Read-only file system
  208. ProductionDb_GetParamFromNvram:1834 (pid=174): Get CM Us Cer File Name from NVRAM failed with error number -2
  209. init_shm:209 (pid=174): Failed to create /nvram//1, Read-only file system
  210. ProductionDb_GetParamFromNvram:1834 (pid=174): Get CM Us Key File Name from NVRAM failed with error number -2
  211. init_shm:209 (pid=174): Failed to create /nvram//1, Read-only file system
  212. ProductionDb_GetParamFromNvram:1834 (pid=174): Get Support Baby-Puma from NVRAM failed with error number -2
  213. init_shm:209 (pid=174): Failed to create /nvram//1, Read-only file system
  214. ProductionDb_GetParamFromNvram:1834 (pid=174): Get Rev1 Default ATDMA from NVRAM failed with error number -2
  215. init_shm:209 (pid=174): Failed to create /nvram//1, Read-only file system
  216. ProductionDb_GetParamFromNvram:1834 (pid=174): Get Board configuration from NVRAM failed with error number -2
  217. init_shm:209 (pid=174): Failed to create /nvram//1, Read-only file system
  218. ProductionDb_GetParamFromNvram:1834 (pid=174): Get MT2170 driver mode from NVRAM failed with error number -2
  219. ProductionDb_Init:1386 (pid=174): Restoring production DB from NVRAM ... FAIL !!
  220. init_shm:209 (pid=174): Failed to create /nvram//1, Read-only file system
  221. ProductionDb_SetParamToNvram:1868 (pid=174): Set CM Mac Address to NVRAM failed with error number -2
  222. init_shm:209 (pid=174): Failed to create /nvram//1, Read-only file system
  223. ProductionDb_SetParamToNvram:1868 (pid=174): Set CM Host IP to NVRAM failed with error number -2
  224. init_shm:209 (pid=174): Failed to create /nvram//1, Read-only file system
  225. ProductionDb_SetParamToNvram:1868 (pid=174): Set CM Lan MAC to NVRAM failed with error number -2
  226. init_shm:209 (pid=174): Failed to create /nvram//1, Read-only file system
  227. ProductionDb_SetParamToNvram:1868 (pid=174): Set CM Lan IP to NVRAM failed with error number -2
  228. init_shm:209 (pid=174): Failed to create /nvram//1, Read-only file system
  229. ProductionDb_SetParamToNvram:1868 (pid=174): Set CM Lan Mask to NVRAM failed with error number -2
  230. init_shm:209 (pid=174): Failed to create /nvram//1, Read-only file system
  231. ProductionDb_SetParamToNvram:1868 (pid=174): Set CM USB Host MAC to NVRAM failed with error number -2
  232. init_shm:209 (pid=174): Failed to create /nvram//1, Read-only file system
  233. ProductionDb_SetParamToNvram:1868 (pid=174): Set CM USB Device MAC to NVRAM failed with error number -2
  234. init_shm:209 (pid=174): Failed to create /nvram//1, Read-only file system
  235. ProductionDb_SetParamToNvram:1868 (pid=174): Set CM PGA type to NVRAM failed with error number -2
  236. init_shm:209 (pid=174): Failed to create /nvram//1, Read-only file system
  237. ProductionDb_SetParamToNvram:1868 (pid=174): Set CM TOP table to NVRAM failed with error number -2
  238. init_shm:209 (pid=174): Failed to create /nvram//1, Read-only file system
  239. ProductionDb_SetParamToNvram:1868 (pid=174): Set CM Tuner type to NVRAM failed with error number -2
  240. init_shm:209 (pid=174): Failed to create /nvram//1, Read-only file system
  241. ProductionDb_SetParamToNvram:1868 (pid=174): Set CM Root Public Valid to NVRAM failed with error number -2
  242. init_shm:209 (pid=174): Failed to create /nvram//1, Read-only file system
  243. ProductionDb_SetParamToNvram:1868 (pid=174): Set CM Root Public Length to NVRAM failed with error number -2
  244. init_shm:209 (pid=174): Failed to create /nvram//1, Read-only file system
  245. ProductionDb_SetParamToNvram:1868 (pid=174): Set CM Baud Rate to NVRAM failed with error number -2
  246. init_shm:209 (pid=174): Failed to create /nvram//1, Read-only file system
  247. ProductionDb_SetParamToNvram:1868 (pid=174): Set CM Frequency Plan to NVRAM failed with error number -2
  248. init_shm:209 (pid=174): Failed to create /nvram//1, Read-only file system
  249. ProductionDb_SetParamToNvram:1868 (pid=174): Set CM Production Date to NVRAM failed with error number -2
  250. init_shm:209 (pid=174): Failed to create /nvram//1, Read-only file system
  251. ProductionDb_SetParamToNvram:1868 (pid=174): Set CM Rng Holdoff Class Id to NVRAM failed with error number -2
  252. init_shm:209 (pid=174): Failed to create /nvram//1, Read-only file system
  253. ProductionDb_SetParamToNvram:1868 (pid=174): Set CM HW Revision to NVRAM failed with error number -2
  254. init_shm:209 (pid=174): Failed to create /nvram//1, Read-only file system
  255. ProductionDb_SetParamToNvram:1868 (pid=174): Set CM HW Patch to NVRAM failed with error number -2
  256. init_shm:209 (pid=174): Failed to create /nvram//1, Read-only file system
  257. ProductionDb_SetParamToNvram:1868 (pid=174): Set CM Serial Number to NVRAM failed with error number -2
  258. init_shm:209 (pid=174): Failed to create /nvram//1, Read-only file system
  259. ProductionDb_SetParamToNvram:1868 (pid=174): Set CM Interface Name to NVRAM failed with error number -2
  260. init_shm:209 (pid=174): Failed to create /nvram//1, Read-only file system
  261. ProductionDb_SetParamToNvram:1868 (pid=174): Set CM MIB level to NVRAM failed with error number -2
  262. init_shm:209 (pid=174): Failed to create /nvram//1, Read-only file system
  263. ProductionDb_SetParamToNvram:1868 (pid=174): Set CM PHY Regs to NVRAM failed with error number -2
  264. init_shm:209 (pid=174): Failed to create /nvram//1, Read-only file system
  265. ProductionDb_SetParamToNvram:1868 (pid=174): Set CM Number Of Tuners to NVRAM failed with error number -2
  266. init_shm:209 (pid=174): Failed to create /nvram//1, Read-only file system
  267. ProductionDb_SetParamToNvram:1868 (pid=174): Set CM DOCSIS PHY Fact to NVRAM failed with error number -2
  268. init_shm:209 (pid=174): Failed to create /nvram//1, Read-only file system
  269. ProductionDb_SetParamToNvram:1868 (pid=174): Set CM Mfg Org Name to NVRAM failed with error number -2
  270. init_shm:209 (pid=174): Failed to create /nvram//1, Read-only file system
  271. ProductionDb_SetParamToNvram:1868 (pid=174): Set CM Mfg Org Name Len to NVRAM failed with error number -2
  272. init_shm:209 (pid=174): Failed to create /nvram//1, Read-only file system
  273. ProductionDb_SetParamToNvram:1868 (pid=174): Set CM Euro Cer File Name to NVRAM failed with error number -2
  274. init_shm:209 (pid=174): Failed to create /nvram//1, Read-only file system
  275. ProductionDb_SetParamToNvram:1868 (pid=174): Set CM Euro Key File Name to NVRAM failed with error number -2
  276. init_shm:209 (pid=174): Failed to create /nvram//1, Read-only file system
  277. ProductionDb_SetParamToNvram:1868 (pid=174): Set CM Us Cer File Name to NVRAM failed with error number -2
  278. init_shm:209 (pid=174): Failed to create /nvram//1, Read-only file system
  279. ProductionDb_SetParamToNvram:1868 (pid=174): Set CM Us Key File Name to NVRAM failed with error number -2
  280. init_shm:209 (pid=174): Failed to create /nvram//1, Read-only file system
  281. ProductionDb_SetParamToNvram:1868 (pid=174): Set Support Baby-Puma to NVRAM failed with error number -2
  282. init_shm:209 (pid=174): Failed to create /nvram//1, Read-only file system
  283. ProductionDb_SetParamToNvram:1868 (pid=174): Set Rev1 Default ATDMA to NVRAM failed with error number -2
  284. init_shm:209 (pid=174): Failed to create /nvram//1, Read-only file system
  285. ProductionDb_SetParamToNvram:1868 (pid=174): Set Board configuration to NVRAM failed with error number -2
  286. init_shm:209 (pid=174): Failed to create /nvram//1, Read-only file system
  287. ProductionDb_SetParamToNvram:1868 (pid=174): Set MT2170 driver mode to NVRAM failed with error number -2
  288. NVM_commit:407 (pid=174): Shared memory failure
  289. NVM_end:490 (pid=174): Shared memory failure
  290. ProductionDb_Init:1391 (pid=174): Saving production DB to NVRAM ... FAIL !!
  291. main:447 (pid=174): ProductionDb_Init --> Failed, exiting
  292. pcd: Error: Process /usr/sbin/docsis_init_once (174) exited with result code 1 (Rule DOCSIS_INITONCE).
  293. pcd: Error: Rule DOCSIS_INITONCE failed.
Advertisement
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!