Advertisement
Guest User

Untitled

a guest
Nov 22nd, 2011
69
0
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 5.96 KB | None | 0 0
  1. CPU revision is: 00029008
  2. Primary instruction cache 16kB, physically tagged, 2-way, linesize 16 bytes.
  3. Primary data cache 8kB, 2-way, linesize 16 bytes.
  4. Linux version 2.4.37.9 (jow@nd-build-02.linux-appliance.net) (gcc version 3.4.6 (OpenWrt-2.0)) #33 Mon Oct 31 19:36:25 CET 2011
  5. Setting the PFC to its default value
  6. Determined physical RAM map:
  7. memory: 01000000 @ 00000000 (usable)
  8. On node 0 totalpages: 4096
  9. zone(0): 4096 pages.
  10. zone(1): 0 pages.
  11. zone(2): 0 pages.
  12. Kernel command line: root=/dev/mtdblock2 rootfstype=squashfs,jffs2 init=/etc/preinit noinitrd console=ttyS0,115200
  13. CPU: BCM5352 rev 0 at 250 MHz
  14. Using 125.000 MHz high precision timer.
  15. Calibrating delay loop... 249.03 BogoMIPS
  16. Memory: 14240k/16384k available (1447k kernel code, 2144k reserved, 100k data, 84k init, 0k highmem)
  17. Dentry cache hash table entries: 2048 (order: 2, 16384 bytes)
  18. Inode cache hash table entries: 1024 (order: 1, 8192 bytes)
  19. Mount cache hash table entries: 512 (order: 0, 4096 bytes)
  20. Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
  21. Page-cache hash table entries: 4096 (order: 2, 16384 bytes)
  22. Checking for 'wait' instruction... unavailable.
  23. POSIX conformance testing by UNIFIX
  24. PCI: no core
  25. PCI: Fixing up bus 0
  26. Linux NET4.0 for Linux 2.4
  27. Based upon Swansea University Computer Society NET3.039
  28. Initializing RT netlink socket
  29. Starting kswapd
  30. Registering mini_fo version $Id$
  31. devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
  32. devfs: boot_options: 0x1
  33. JFFS2 version 2.1. (C) 2001 Red Hat, Inc., designed by Axis Communications AB.
  34. squashfs: version 3.0 (2006/03/15) Phillip Lougher
  35. pty: 256 Unix98 ptys configured
  36. Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled
  37. ttyS00 at 0xb8000300 (irq = 3) is a 16550A
  38. ttyS01 at 0xb8000400 (irq = 3) is a 16550A
  39. b44.c:v0.93 (Mar, 2004)
  40. PCI: Setting latency timer of device 00:01.0 to 64
  41. eth0: Broadcom 47xx 10/100BaseT Ethernet 00:25:9c:**:**:**
  42. Physically mapped flash: Found an alias at 0x400000 for the chip at 0x0
  43. Physically mapped flash: Found an alias at 0x800000 for the chip at 0x0
  44. Physically mapped flash: Found an alias at 0xc00000 for the chip at 0x0
  45. Physically mapped flash: Found an alias at 0x1000000 for the chip at 0x0
  46. Physically mapped flash: Found an alias at 0x1400000 for the chip at 0x0
  47. Physically mapped flash: Found an alias at 0x1800000 for the chip at 0x0
  48. Physically mapped flash: Found an alias at 0x1c00000 for the chip at 0x0
  49. Amd/Fujitsu Extended Query Table v1.1 at 0x0040
  50. number of CFI chips: 1
  51. cfi_cmdset_0002: Disabling fast programming due to code brokenness.
  52. Flash device: 0x400000 at 0x1c000000
  53. bootloader size: 262144
  54. Physically mapped flash: Filesystem type: squashfs, size=0x1a811d
  55. Creating 5 MTD partitions on "Physically mapped flash":
  56. 0x00000000-0x00040000 : "cfe"
  57. 0x00040000-0x003f0000 : "linux"
  58. 0x000bc000-0x00270000 : "rootfs"
  59. mtd: partition "rootfs" doesn't start on an erase block boundary -- force read-only
  60. 0x003f0000-0x00400000 : "nvram"
  61. 0x00270000-0x003f0000 : "rootfs_data"
  62. sflash: found no supported devices
  63. Initializing Cryptographic API
  64. NET4: Linux TCP/IP 1.0 for NET4.0
  65. IP Protocols: ICMP, UDP, TCP, IGMP
  66. IP: routing cache hash table of 512 buckets, 4Kbytes
  67. TCP: Hash tables configured (established 1024 bind 2048)
  68. Linux IP multicast router 0.06 plus PIM-SM
  69. NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
  70. NET4: Ethernet Bridge 008 for NET4.0
  71. 802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
  72. All bugs added by David S. Miller <davem@redhat.com>
  73. VFS: Mounted root (squashfs filesystem) readonly.
  74. Mounted devfs on /dev
  75. Freeing unused kernel memory: 84k freed
  76. diag: Detected 'Linksys WRT54G/GS/GL'
  77. b44: eth0: Link is up at 100 Mbps, full duplex.
  78. b44: eth0: Flow control is off for TX and off for RX.
  79. roboswitch: Probing device eth0: found a 5325! It's a 5350.
  80. Journalled Block Device driver loaded
  81. mini_fo: using base directory: /
  82. mini_fo: using storage directory: /overlay
  83. jffs2.bbc: SIZE compression mode activated.
  84. b44: eth0: Link is up at 100 Mbps, full duplex.
  85. b44: eth0: Flow control is off for TX and off for RX.
  86. eth0.0: add 01:00:5e:**:**:** mcast address to master interface
  87. eth0.1: add 01:00:5e:**:**:** mcast address to master interface
  88. eth0.0: dev_set_promiscuity(master, 1)
  89. device eth0 entered promiscuous mode
  90. device eth0.0 entered promiscuous mode
  91. eth0.1: del 01:00:5e:**:**:** mcast address from vlan interface
  92. eth0.1: del 01:00:5e:**:**:** mcast address from master interface
  93. eth0.1: Setting MAC address to 00 13 8f ** ** **.
  94. eth0.1: add 01:00:5e:**:**:** mcast address to master interface
  95. CSLIP: code copyright 1989 Regents of the University of California
  96. br-lan: port 1(eth0.0) entering learning state
  97. br-lan: port 1(eth0.0) entering forwarding state
  98. br-lan: topology change detected, propagating
  99. PPP generic driver version 2.4.2
  100. PCI: Setting latency timer of device 00:05.0 to 64
  101. PCI/DMA
  102. wl0: wlc_attach: chiprev 0 coreunit 0 corerev 9 cccap 0x4787aa maccap 0x0 band 2.4G, phy_type 2 phy_rev 7 ana_rev 2
  103. wl0: Broadcom BCM4320 802.11 Wireless Controller 4.150.10.5
  104. br-lan: port 1(eth0.0) entering disabled state
  105. br-lan: port 1(eth0.0) entering learning state
  106. br-lan: port 1(eth0.0) entering forwarding state
  107. br-lan: topology change detected, propagating
  108. ip_tables: (C) 2000-2002 Netfilter core team
  109. ip_conntrack version 2.1 (5953 buckets, 5953 max) - 352 bytes per conntrack
  110. device wl0 entered promiscuous mode
  111. br-lan: port 2(wl0) entering learning state
  112. br-lan: port 2(wl0) entering forwarding state
  113. br-lan: topology change detected, propagating
  114. [INF] sdhc: Version: 2.0.2 Parms: major=0 din=2 dout=4 clk=3 cs=7 maxsec=32 rahead=2
  115. [INF] sdhc: SD Card detected & initialized
  116. [INF] sdhc: Assigned dynamic major number 254
  117. Partition check:
  118. /dev/sdcard: p1 p2 p3
  119. [INF] sdhc: Module loaded
  120. kjournald starting. Commit interval 5 seconds
  121. EXT3 FS 2.4-0.9.19, 19 August 2002 on sdcard(254,1), internal journal
  122. EXT3-fs: mounted filesystem with ordered data mode.
  123. Adding Swap: 63992k swap-space (priority -1)
  124.  
  125.  
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement