Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- **********************************************************************************
- ACY13 System BIOS Release Notification 06/06/2002
- *File name : CY13103A.ROM
- *Checksum : 5BDF
- Notification:
- * CMOS map change? No
- * CMOS map default change ? No
- * IO address change? No
- * System ID byte change? Yes (BIOS version)
- *********************************
- System BIOS (Rev. CY13103A.ROM)
- *********************************
- * System BIOS change? Yes
- Notification:
- 1. Based on ACY13032.ROM.
- 2. Update Nidia VGA BIOS rev. 3.11.01.52.A3
- .Fixed SXGA+ panel power sequencing issue.
- Issue fixed:
- 1. IBM 15" SXGA+ falls power down sequencing test -
- Clock turn off after LCDVDD.
- 2. LPT port setting IRQ5 in setup menu will case
- LPT port IRQ conflict with USB device.
- .USB device2 IRQ form 5 change to 11
- *********************************
- KeyBoard BIOS (Rev. ACY1331K.ROM)
- *********************************
- * Keyboard BIOS change? No
- **********************************************************************************
- ACY13 System BIOS Release Notification 05/29/2002
- *File name : ACY13032.ROM
- *Checksum : 3C30
- Notification:
- * CMOS map change? No
- * CMOS map default change ? No
- * IO address change? No
- * System ID byte change? Yes (BIOS version)
- *********************************
- System BIOS (Rev. ACY13032.ROM)
- *********************************
- * System BIOS change? Yes
- Notification:
- 1. Based on ACY13030.ROM.
- 2. Update Nidia VGA BIOS rev. 3.11.01.52.06
- .Support 32MB Samsung DDR VGA board.
- 3. Correct POST hardware over temperature shutdown warning message
- to ".... please call Supplier Support ..."
- Issue fixed:
- 1. Fix issue that system sometimes boot fail while dock with USB Dock.
- 2. Fix issue that POST-RTS: Intermittently Toshiba HDD boot fail.
- 3. Fix HLDS CD-RW reboot disappear problem.
- It has to update F/W version to 2.07.
- .Reduce two times IDE reset to one time.
- .Add 1 sec delay before IDE reset, if warm boot.
- 4. Fix Lotus Note issue CC021,CC022,CC023
- 1. CC021 : Win98 SE system hangs up by Fn+F7.
- 2. CC022 : Win98 SE system hangs up by Fn+F8.
- 3. CC023 : Win98 SE system hang up without TouchPad driver.
- 5. Fixed there is no display on LCD if the setting of Display
- Video Device is "CRT Mode" and there is no CRT attached.
- We also change the behavior for the display mode to :
- 1. If set CRT only mode in setup menu and CRT doesn't active,
- set simul mode.
- 2. If set LCD only mode in setup menu and LCD doesn't active,
- set simul mode.
- *********************************
- KeyBoard BIOS (Rev. ACY1331K.ROM)
- *********************************
- * Keyboard BIOS change? Yes
- 1. Base on keyboard BIOS rev. 0.30A
- 2. Update new thermal fan trip points for 2.0GHz CPU
- Shutdown 90C
- THROTTLING 100 ON/ 90 OFF
- 1st FAN
- FAN High 6200RPM 73 ON/63 OFF
- FAN LOW 4200RPM 65 ON/58 OFF
- 2nd FAN 7000RPM 58 ON/53 OFF
- **********************************************************************************
- ACY13 System BIOS Release Notification 05/16/2002
- *File name : CY13102U.ROM
- *Checksum : 202E
- Notification:
- * CMOS map change? No
- * CMOS map default change ? No
- * IO address change? No
- * System ID byte change? Yes (BIOS version)
- *********************************
- System BIOS (Rev. CY13102U.ROM)
- *********************************
- * System BIOS change? Yes
- Notification:
- 1. Based on CY13102A.ROM.
- 2. Nvidia VGA BIOS rev. 3.11.01.50.05
- Issue fixed:
- Lotus Note issue CC021,CC022,CC023
- 1. CC021 : Win98 SE system hangs up by Fn+F7.
- 2. CC022 : Win98 SE system hangs up by Fn+F8.
- 3. CC023 : Win98 SE system hang up without TouchPad driver.
- *********************************
- KeyBoard BIOS (Rev. ACY1330K.ROM)
- *********************************
- * Keyboard BIOS change? Yes
- 1. Base on keyboard BIOS rev. 0.29A
- 2. Fixed can not change battery Manufacturer Name, when battery
- change.
- **********************************************************************************
- ACY13 System BIOS Release Notification 04/22/2002
- *File name : CY13102A.ROM
- *Checksum : 3BD5
- Notification:
- * CMOS map change? No
- * CMOS map default change ? No
- * IO address change? No
- * System ID byte change? Yes (BIOS version)
- *********************************
- System BIOS (Rev. CY13102A.ROM)
- *********************************
- * System BIOS change? Yes
- Notification:
- 1. Based on ACY13029.ROM.
- 2. Nvidia VGA BIOS rev. 3.11.01.50.05
- 3. Change sign-on only.
- Issue fixed:
- *********************************
- KeyBoard BIOS (Rev. ACY1329K.ROM)
- *********************************
- * Keyboard BIOS change? No
- **********************************************************************************
- ACY13 System BIOS Release Notification 04/22/2002
- *File name : ACY13029.ROM
- *Checksum : 7855
- Notification:
- * CMOS map change? No
- * CMOS map default change ? No
- * IO address change? No
- * System ID byte change? Yes (BIOS version)
- *********************************
- System BIOS (Rev. ACY13029.ROM)
- *********************************
- * System BIOS change? Yes
- Notification:
- 1. Based on ACY13101.ROM.
- 2. Update Nvidia VGA BIOS rev. 3.11.01.50.05
- .Add IBM ITSX95C SXGA+ panel (panel ID = 1)
- .Add Unipac UB141X01 XGA panel (Panel ID = 2)
- .Change Panel ID 8 support panel
- Old : Hyundai HT14x13 XGA panel
- New : Hannstar HSD150PX11-B XGA panel
- 3. Update CPU microcode from 09h to 0Dh
- 4. Change the SMBIOS type 0 "COMPAL...." to "PHOENIX..."
- 5. It will show warning message if CPU OTP shutdown noted in EEPROM.
- 6. Support Win98 OS.
- Issue fixed:
- 1. 24111 Toggling Display HotKeys eventually cause loss of USB Mouse
- on inner USB port.
- 2. 25184 QT:Fn+F10 fails to eject HLDS DVD drives Mo # = GDR-8081N/FW01.08.
- 3. 25658 HDD 0 not found - Fujitsu HDD
- *********************************
- KeyBoard BIOS (Rev. ACY1329K.ROM)
- *********************************
- * Keyboard BIOS change? Yes
- 1. Base on keyboard BIOS rev. 0.28A
- 2. Fix brightness value can not keep in VA base system.
- 3. Improvement for reflash shutdown problem.
- 4. Add some code for M/B PD23 problem check.
- 5. Change the turn FAN high to low during POST.
- 6. Update new thermal fan trip points for 1.8GHz CPU
- Shutdown 90C
- THROTTLING 80 ON/ 75 OFF
- 1st FAN
- FAN High 6200RPM 78 ON/63 OFF
- FAN LOW 4200RPM 65 ON/58 OFF
- 2nd FAN 7000RPM 58 ON/53 OFF
- **********************************************************************************
- ACY13 System BIOS Release Notification 03/04/02
- *File name : ACY13028.ROM
- *Checksum : 78BF
- Notification:
- * CMOS map change? No
- * CMOS map default change ? No
- * IO address change? No
- * System ID byte change? Yes (BIOS version)
- *********************************
- System BIOS (Rev. ACY13028.ROM)
- *********************************
- * System BIOS change? Yes
- Notification:
- 1. Based on ACY13027.ROM.
- 2. Nvidia VGA BIOS rev. 3.11.01.49.02
- 3. Change sign-on only.
- Issue fixed:
- *********************************
- KeyBoard BIOS (Rev. ACY1328K.ROM)
- *********************************
- * Keyboard BIOS change? Yes
- 1. Base on keyboard BIOS rev. 0.25A
- 2. Delay setting low to CRT_ON about 30 ms.
- **********************************************************************************
- ACY13 System BIOS Release Notification 02/25/02
- *File name : ACY13027.ROM
- *Checksum : C1F0
- Notification:
- * CMOS map change? No
- * CMOS map default change ? No
- * IO address change? No
- * System ID byte change? Yes (BIOS version)
- *********************************
- System BIOS (Rev. ACY13027.ROM)
- *********************************
- * System BIOS change? Yes
- Notification:
- 1. Based on ACY13100.ROM.
- 2. Nvidia VGA BIOS rev. 3.11.01.49.02
- 3. BIOS Setup change.
- Hide C2/C3/C4/Spread Spectrum items.
- 4. Improve IDE device detection algorithm.
- 5. Add some delay(about 500ms) in display switch hotkey for
- matching panel spec.
- 6. Fn+F7(expand hotkey) and Fn+F8(display switch hotkey) only can be
- used when VGA in D0 state. Just make system more stable.
- 7. BIOS Setup change.
- .Modify Video RAM size from "8MB" to "8 MB"
- .Correct ECP mode help text. from "Output Only" to "Normal Mode".
- 8. Change SM_INTRUDER function algorithm.
- .Only write a mark into EEPROM, it will not show error message
- during POST.
- .It will check RTC OK or not by checking RTC_PWR_STS(bit2)
- before checking the SM_INTRUDER ICH3M bit.
- Issue fixed:
- 1. 21416 Noise from external speaker/headphones on S4 or complete
- power off.
- 2. 22051 Brief flash of video trash displayed at POST,
- with "PW on Boot" option selected.
- 3. 22724 unnecessary item specific help text for the BIOS boot devices.
- 4. 23030 Cannot Boot to Cardbus NIC when all other boot devices
- are disabled.
- 5. 23524 Intermittent power off when removing A/C power with
- charged Panasonic battery.
- 6. 23671 [Panasonic bat] Intermittent interruption in charging
- (B-Test Sample) battery.
- 7. 23859 POST delay with HLDS GDR-8081N DVD-ROM fw 0108 with
- Tang, M2P4 and M2P3
- *********************************
- KeyBoard BIOS (Rev. ACY1325K.ROM)
- *********************************
- * Keyboard BIOS change? Yes
- 1. Base on keyboard BIOS rev. 0.23A
- 2. 21416 Noise from external speaker/headphones on S4 or
- complete power off.
- 3. BIOS will return CPU temperature to 3C, if the temperature that
- read from MAX6654 is below 0 degree (80h).
- 4. Fix Panasonic battery can not be charged that cause by
- communication fail problem. BIOS will make a error check for
- panasonic battery as a 4/6/8 cell battery.
- 5. BIOS will write value to EEPROM, if over temp. software
- shutdown.
- 6. Enhance BIOS Delldiag fan test algorithm.
- **********************************************************************************
- ACY13 System BIOS Release Notification 02/09/02
- *File name : ACY13100.ROM
- *Checksum : 257F
- Notification:
- * CMOS map change? No
- * CMOS map default change ? No
- * IO address change? No
- * System ID byte change? Yes (BIOS version)
- *********************************
- System BIOS (Rev. ACY13100.ROM)
- *********************************
- * System BIOS change?
- Notification:
- 1. Based on ACY13023.ROM.
- 2. Nvidia VGA BIOS rev. 3.11.01.49.02
- 3. Change sigon only.
- Issue fixed:
- *********************************
- KeyBoard BIOS (Rev. ACY1323K.ROM)
- *********************************
- * Keyboard BIOS change? Yes
- 1. Base on keyboard BIOS rev. 0.22A
- 2. Update some code for setting the 4/6 cells battery to bad cell.
- Report 4/6 cell battery to system BIOS.
- 3. Change the lowest voltage of the Main fan from 2.8V(DA 70h) to
- 2.5V(DA 5Ch).
- 4. Add "Fn" Sticky key function.
- **********************************************************************************
- ACY13 System BIOS Release Notification 02/08/02
- *File name : ACY13023.ROM
- *Checksum : 1E5F
- Notification:
- * CMOS map change? No
- * CMOS map default change ? No
- * IO address change? No
- * System ID byte change? Yes (BIOS version)
- *********************************
- System BIOS (Rev. ACY13023.ROM)
- *********************************
- * System BIOS change? Yes
- Notification:
- 1. Based on ACY13022.ROM.
- 2. Update Nvidia VGA BIOS rev. 3.11.01.49.02
- 3. It will show warning message "The battery is not supported by this system.
- The battery will not be charged." during POST, if use the 4/6 cell battery.
- 4. If no battery, RBU will wait for battery plug in.
- 5. Enhance boot from multisession CD-ROM function.
- 6. Add "Fn" Sticky key function.
- Issue fixed:
- 1. 20646 Black Horizontal Lines seen typing within DOS editor
- while in a full DOS screen. ( Fixed by VGA BIOS)
- 2. 22439 Printer function still work after disable parallel port
- under CMOS setup menu.
- *********************************
- KeyBoard BIOS (Rev. ACY1323K.ROM)
- *********************************
- * Keyboard BIOS change? Yes
- 1. Base on keyboard BIOS rev. 0.22A
- 2. Update some code for setting the 4/6 cells battery to bad cell.
- Report 4/6 cell battery to system BIOS.
- 3. Change the lowest voltage of the Main fan from 2.8V(DA 70h) to
- 2.5V(DA 5Ch).
- 4. Add "Fn" Sticky key function.
- **********************************************************************************
- ACY13 System BIOS Release Notification 02/01/02
- *File name : ACY13022.ROM
- *Checksum : 4D08
- Notification:
- * CMOS map change? No
- * CMOS map default change ? Yes
- * IO address change? No
- * System ID byte change? Yes (BIOS version)
- *********************************
- System BIOS (Rev. ACY13022.ROM)
- *********************************
- * System BIOS change? Yes
- Notification:
- 1. Based on ACY13021.ROM.
- 2. Nvidia VGA BIOS rev. 3.11.01.45.07
- 3. If installed Memory > 512MB, system will halt in 845MZ.
- 4. Change to print PORT default to ECP mode.
- Issue fixed:
- 1. 21471 Multisession bootable CDR's(mini) no longer boot.
- 2. 22037 1088 Diags and SMBIOWFM report video and audio devices as disabled.
- 3. 22349 Press F12 cannot boot from NIC.
- 4. 22525 Battery cannot charge after system shut down.
- 5. 22531 The insert key in Japan keyboard is malfunction.
- *********************************
- KeyBoard BIOS (Rev. ACY1322K.ROM)
- *********************************
- * Keyboard BIOS change? Yes
- 1. Base on keyboard BIOS rev. 0.21A
- 2. Set bit 3 of MAX6654 configure register to 1.
- 3. Modify keyboard matrix for new keyboard. ( R-Ctrl and `/~ )
- 4. FAN trip point change.
- FAN1
- Shutdown 95C
- Throttling on (50%) 80C
- Throttling off 75C
- FAN high on (6200RPM) 73C
- FAN high off 65C
- FAN Low on (4200RPM) 62C
- FAN Low off 50C
- FAN2
- FAN on (7000RPM) 70C
- FAN off 55C
- **********************************************************************************
- ACY13 System BIOS Release Notification 01/24/02
- *File name : ACY13021.ROM
- *Checksum : 11C3
- Notification:
- * CMOS map change? Yes
- * CMOS map default change ? Yes
- * IO address change? No
- * System ID byte change? Yes (BIOS version)
- *********************************
- System BIOS (Rev. ACY13021.ROM)
- *********************************
- * System BIOS change? Yes
- Notification:
- 1. Based on ACY13020.ROM.
- 2. Nvidia VGA BIOS rev. 3.11.01.45.07
- 3. Add boot from cardbus card support.
- 4. update BIOS algorithm to reduce S4/shutdown noise.
- Issue fixed:
- 1. 20457 Lost supervisor password after updating BIOS from X16 to X17.
- *********************************
- KeyBoard BIOS (Rev. ACY1321K.ROM)
- *********************************
- * Keyboard BIOS change? Yes
- 1. Base on keyboard BIOS rev. 0.20A
- 2. Support Lid utility to disable turn off backlight feature.
- 3. Update code for supporting the R570 revision check utility.
- 4. Fix the problem that main fan speed will slow down soon,
- after call set fan speed command.
- **********************************************************************************
- ACY13 System BIOS Release Notification 01/17/02
- *File name : ACY13020.ROM
- *Checksum : B926
- Notification:
- * CMOS map change? No
- * CMOS map default change ? No
- * IO address change? No
- * System ID byte change? Yes (BIOS version)
- *********************************
- System BIOS (Rev. ACY13020.ROM)
- *********************************
- * System BIOS change? Yes
- Notification:
- 1. Based on ACY13019.ROM.
- 2. Nvidia VGA BIOS rev. 3.11.01.45.07
- 3. It will be beep sound during POST, if quietboot disable.
- 4. For system more stable, lid only turns off backlight during Windows XP boot,
- and will work after desktop appearance.
- 5. Modify modem subsystem vendor ID.
- Issue fixed:
- 1. 20451 Several ill Effects of Suspending with some PS2 keyboards & HDD PW.
- 2. 20957 Errors reported by SMBIOWFM.EXE.
- 3. Fixed system shows FAN and thermal sensor fail intermittently when press pause keys during
- POST.
- *********************************
- KeyBoard BIOS (Rev. ACY1320K.ROM)
- *********************************
- * Keyboard BIOS change? Yes
- 1. Base on keyboard BIOS rev. 0.19A
- 2. Fix sometimes show FAN fail and thermal sensor fail during POST,
- if press pause keys during POST.
- 3. Fix FAN2 EC command can not turn on FAN problem.
- **********************************************************************************
- ACY13 System BIOS Release Notification 01/10/02
- *File name : ACY13019.ROM
- *Checksum : CE11
- Notification:
- * CMOS map change? No
- * CMOS map default change ? No
- * IO address change? No
- * System ID byte change? Yes (BIOS version)
- *********************************
- System BIOS (Rev. ACY13019.ROM)
- *********************************
- * System BIOS change? Yes
- Notification:
- 1. Based on ACY13018.ROM.
- 2. Nvidia VGA BIOS rev. 3.11.01.45.07
- 3. Add the feature that press F12 will force boot from LAN for PC2001.
- 4. SMBIOS change
- .Correct SMBIOS type 0 BIOS information BIOS ROM size
- .Add type 22 battery information
- 5. BIOS setup menu change -- Main page
- .Change "Pentium(R) 4 1.6GHz/1.2GHz" to "Pentium(R) 4-M 1.6/1.2GHz"
- 6. Add code from Intel/Dell to improve ichcx.exe utility failure.
- 7. Change C3, C4 default to enabled
- Issue fixed:
- 1. Fix the problem that can not beep sound under DOS.
- 2. 19477- FN+F7 malfunction.
- *********************************
- KeyBoard BIOS (Rev. ACY1319K.ROM)
- *********************************
- * Keyboard BIOS change? Yes
- 1. Base on keyboard BIOS rev. 0.18A
- 2. Fix over temperature can not shutdown problem after Delldiag test.
- 3. Change FAN control method for Delldiag test.
- . Delldiag call "Disable HW SMIs" will make FAN control by delldiag.
- . Delldiag call "Restore HW SMIs" will make FAN control by EC.
- . If you only call "Set FAN speed", it will set the FAN speed that
- you wish. But it will change to the correct FAN speed, if meet
- the FAN strip point.
- **********************************************************************************
- ACY13 System BIOS Release Notification 01/03/2002
- *File name : ACY13017.ROM
- *Checksum : FFFA
- Notification:
- * CMOS map change? Yes
- * CMOS map default change ? Yes
- * IO address change? No
- * System ID byte change? Yes (BIOS version)
- *********************************
- System BIOS (Rev. ACY13017.ROM)
- *********************************
- * System BIOS change? Yes
- Notification:
- 1. Based on ACY13X16.ROM.
- 2. Nvidia VGA BIOS rev. 3.11.01.45.07
- 3. BIOS setup menu change
- .Remove system memory and extend memory and show total memory only
- .Show L2 cache size
- 4. Correct SMBIOS type 4 processor information error
- 5. Reduce the S3 resume time by skip HDD password check, if no HDD password.
- 6. Improve Lid algorithm to avoid hibernate repeadly problem.
- Issue fixed:
- 1. 19187 - System hang up when press Fn+F8 repeadly
- 2. 18942 - It need to press any key for display present after resuming from
- Standby
- 3. 19768 - HCT 1.0 ACPI verifier fail
- *********************************
- KeyBoard BIOS (Rev. ACY1317K.ROM)
- *********************************
- * Keyboard BIOS change? Yes
- 1. Base on keyboard BIOS rev. 0.16A
- 2. Improve Lid algorithm to avoid hibernate repeadly problem.
- **********************************************************************************
- ACY13 System BIOS Release Notification 12/26/01
- *File name : ACY13X16.ROM
- *Checksum : 59FD
- Notification:
- * CMOS map change? No
- * CMOS map default change ? No
- * IO address change? No
- * System ID byte change? Yes (BIOS version)
- *********************************
- System BIOS (Rev. ACY13016.ROM)
- *********************************
- * System BIOS change? Yes
- Notification:
- 1. Based on ACY13X15.ROM.
- 2. Nvidia VGA BIOS rev. 3.11.01.45.07
- 3. Update the newer phoenix kernel code of CPU,cache,chipset.
- 4. Add brun-in room AST test support.
- 5. Add Modem disabled feature .
- Issue fixed:
- 1. 19976- Hibernate repeately issue on WinXP.
- 2. 20242- WXP,W2K:X15:Audio malfunction after standby.
- *********************************
- KeyBoard BIOS (Rev. ACY1316K.ROM)
- *********************************
- * Keyboard BIOS change? Yes
- 1. Base on keyboard BIOS rev. 0.15A
- 2. Correct the brightness parameter.
- 3. Fix issue Hibernate repeately issue on WinXP.
- 4. Fix issue WXP,W2K:X15:Audio malfunction after standby.
- 5. Add brun-in room AST test support.
- **********************************************************************************
- *
- ACY13 System BIOS Release Notification 12/20/01
- *File name : ACY13015.ROM
- *Checksum : C4D2
- Notification:
- * CMOS map change? No
- * CMOS map default change ? No
- * IO address change? No
- * System ID byte change? Yes (BIOS version)
- *********************************
- System BIOS (Rev. ACY13015.ROM)
- *********************************
- * System BIOS change? Yes
- Notification:
- 1. Based on ACY13014.ROM.
- 2. Nvidia VGA BIOS rev. 3.11.01.45.07
- 3. Setup Menu change (Main page)
- .Change HDD model type display to model type and size
- 4. The F000:E076 will show "Compal System" .
- Issue fixed:
- 1. 19299- S3 power sonsumption over 1 watt
- . BIOS will set Mute pin to High during S3
- . BIOS will set LAN_Disable pin to LOW during S3, if battery only
- And it will make WOL malfunction, if battery only
- 2. 19540- PT-W2K-No keyboard input on resume from S4 if PSWD is set.
- 3. 19978- Second FAN can not be tested by delldiag.
- *********************************
- KeyBoard BIOS (Rev. ACY1315K.ROM)
- *********************************
- * Keyboard BIOS change? Yes
- 1. Base on keyboard BIOS rev. 0.14A
- 2. Add code for DellDiag FAN2 test.
- 3. Add code to reduce S3 power consumption (Mute pin and LAN_Disable pin)
- 4. Fix IREF2 will be zero in trickle charge.
- **********************************************************************************
- ACY13 System BIOS Release Notification 12/12/01
- *File name : ACY13014.ROM
- *Checksum : 2AA0
- Notification:
- * CMOS map change? No
- * CMOS map default change ? No
- * IO address change? No
- * System ID byte change? Yes (BIOS version)
- *********************************
- System BIOS (Rev. ACY13014.ROM)
- *********************************
- * System BIOS change? Yes
- Notification:
- 1. Based on ACY13013.ROM.
- 2. Nvidia VGA BIOS rev. 3.11.01.45.07
- 3. check main FAN rotation and open diode test during POST.
- It will turn on Fan and throttling 75%, if test fail.
- 4. Enable CPU Automatic Thermal Control Circuit.
- BIOS will set MSR 1A0h bit 3 during POST and S3,S4 resume.
- 5. The clock will not stop during C3 by programmed the clock generator
- 6. Setup Menu change (Main page)
- .add CPU type item
- .Change HDD size display to the model type
- .add ATAPI CD-ROM item
- Issue fixed:
- 1. System will auto resume from Standby after PC card inserting
- 2. Reflash reboot system hang up.
- *********************************
- KeyBoard BIOS (Rev. ACY1314K.ROM)
- *********************************
- * Keyboard BIOS change? Yes
- 1. Base on keyboard BIOS rev. 0.13A
- 2. Add code for main FAN rotation and open diode test.
- 3. update M2P3 battery protection code
- .Modify battery over temperature, BattOver_Temp from 60 degree
- to 55 degree.
- .Add Battery Over Voltage Protection and
- Over Temperature Protection.
- .Change charging current of trickle charge to 400mA
- **********************************************************************************
- ACY13 System BIOS Release Notification 11/22/01
- *File name : ACY13011.ROM
- *Checksum :
- Notification:
- * CMOS map change? No
- * CMOS map default change ? Yes
- * IO address change? No
- * System ID byte change? Yes (BIOS version)
- *********************************
- System BIOS (Rev. ACY13011.ROM)
- *********************************
- * System BIOS change? Yes
- Notification:
- 1. Based on ACY13008.ROM.
- 2. Nvidia VGA BIOS rev. 3.11.01.45.07
- 3. Keyboard BIOS will assert LAN_Disable#, if onboard LAN need to
- be hiden.
- 4. BIOS setup menu change.
- [Main]
- 1. It will only show HDD size only and can not
- enter sub menu by end-user.
- 2. Change Main page "Legacy Diskette A:" -> "Floppy Drive"
- "Primary Master" -> "Hdd Disk"
- [system devices]
- 1. Change C2,C3,C4 to enabled
- 2. Hide (Local Bus IDE adapter) by DELL request.
- 3. Hide the items below, because seldom use.
- . Cpu Sleep Enable Signal
- . Deeper Sleep in S1M
- . PCI Clock Run
- . DRAM Row Power Management
- Issue fixed:
- 1. fix the boot display device can not be selected in SETUP MENU.
- 2. fix system can enter boot menu by press ESC during resume from S4.
- *********************************
- KeyBoard BIOS (Rev. ACY1310K.ROM)
- *********************************
- * Keyboard BIOS change? Yes
- 1. Base on keyboard BIOS rev. 0.08A
- 2. Correct some code for PT M/B
- 3. change keyboard BIOS PC3(PCIRST#) pin from output to input.
- 4. Add new burst mode inverter support. New burst mode use new SMBUS slave
- address 0x58. (Just verified with Samsung LTN141XD-L01 panel)
- 5. Fix 13.3" Unipac panel brightness problem.
- *********************************
- VGA BIOS (Rev. 3.11.01.45.07)
- *********************************
- * VGA BIOS change? Yes
- 1. Base on VGA BIOS rev. 3.11.01.45.02
- 2. fix the boot display device can not be selected in SETUP MENU.
- 3. Add ACY13 panel support.
- **********************************************************************************
- ACY13 System BIOS Release Notification 11/14/01
- *File name : ACY13008.ROM
- *Checksum : 3DDB
- Notification:
- * CMOS map change? No
- * CMOS map default change ? No
- * IO address change? No
- * System ID byte change? Yes (BIOS version)
- *********************************
- System BIOS (Rev. ACY13008.ROM)
- *********************************
- * System BIOS change? Yes
- Notification:
- 1. Based on ACY13008.ROM.
- 2. Nvidia VGA BIOS rev. 3.11.01.44.10
- 3. The first version of ACY13 BIOS.
- Issue fixed:
- *********************************
- KeyBoard BIOS (Rev. ACY1308K.ROM)
- *********************************
- * Keyboard BIOS change? Yes
- 1. Base on keyboard BIOS rev. 0.07A
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement