Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- [ 0.000000] Initializing cgroup subsys cpuset
- [ 0.000000] Initializing cgroup subsys cpu
- [ 0.000000] Linux version 2.6.32-5-686 (Debian 2.6.32-48squeeze1) (dannf@debian.org) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Mon Feb 25 01:04:36 UTC 2013
- [ 0.000000] KERNEL supported cpus:
- [ 0.000000] Intel GenuineIntel
- [ 0.000000] AMD AuthenticAMD
- [ 0.000000] NSC Geode by NSC
- [ 0.000000] Cyrix CyrixInstead
- [ 0.000000] Centaur CentaurHauls
- [ 0.000000] Transmeta GenuineTMx86
- [ 0.000000] Transmeta TransmetaCPU
- [ 0.000000] UMC UMC UMC UMC
- [ 0.000000] BIOS-provided physical RAM map:
- [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
- [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
- [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
- [ 0.000000] BIOS-e820: 0000000000100000 - 0000000077fb8000 (usable)
- [ 0.000000] BIOS-e820: 0000000077fb8000 - 0000000077fc0000 (ACPI NVS)
- [ 0.000000] BIOS-e820: 0000000077fc0000 - 0000000077fce000 (ACPI data)
- [ 0.000000] BIOS-e820: 0000000077fce000 - 0000000078000000 (ACPI NVS)
- [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
- [ 0.000000] DMI present.
- [ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it.
- [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
- [ 0.000000] last_pfn = 0x77fb8 max_arch_pfn = 0x100000
- [ 0.000000] MTRR default type: uncachable
- [ 0.000000] MTRR fixed ranges enabled:
- [ 0.000000] 00000-9FFFF write-back
- [ 0.000000] A0000-BFFFF uncachable
- [ 0.000000] C0000-CFFFF write-protect
- [ 0.000000] D0000-EFFFF uncachable
- [ 0.000000] F0000-FFFFF write-protect
- [ 0.000000] MTRR variable ranges enabled:
- [ 0.000000] 0 base 000000000 mask FC0000000 write-back
- [ 0.000000] 1 base 040000000 mask FE0000000 write-back
- [ 0.000000] 2 base 060000000 mask FF0000000 write-back
- [ 0.000000] 3 base 070000000 mask FF8000000 write-back
- [ 0.000000] 4 disabled
- [ 0.000000] 5 disabled
- [ 0.000000] 6 disabled
- [ 0.000000] 7 disabled
- [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
- [ 0.000000] initial memory mapped : 0 - 01800000
- [ 0.000000] init_memory_mapping: 0000000000000000-00000000373fe000
- [ 0.000000] 0000000000 - 0000400000 page 4k
- [ 0.000000] 0000400000 - 0037000000 page 2M
- [ 0.000000] 0037000000 - 00373fe000 page 4k
- [ 0.000000] kernel direct mapping tables up to 373fe000 @ 10000-16000
- [ 0.000000] RAMDISK: 3779c000 - 37fefabc
- [ 0.000000] Allocated new RAMDISK: 00100000 - 00953abc
- [ 0.000000] Move RAMDISK from 000000003779c000 - 0000000037fefabb to 00100000 - 00953abb
- [ 0.000000] ACPI: RSDP 000f9e20 00014 (v00 ACPIAM)
- [ 0.000000] ACPI: RSDT 77fc0000 00050 (v01 _ASUS_ Notebook 20080731 MSFT 00000097)
- [ 0.000000] ACPI: FACP 77fc0200 00084 (v01 073108 FACP1434 20080731 MSFT 00000097)
- [ 0.000000] ACPI: DSDT 77fc0690 09E21 (v01 X51C0 X51C0101 00000101 INTL 20051117)
- [ 0.000000] ACPI: FACS 77fce000 00040
- [ 0.000000] ACPI: APIC 77fc0390 0006C (v01 073108 APIC1434 20080731 MSFT 00000097)
- [ 0.000000] ACPI: MCFG 77fc0440 0003C (v01 073108 OEMMCFG 20080731 MSFT 00000097)
- [ 0.000000] ACPI: SLIC 77fc0480 00176 (v01 _ASUS_ Notebook 20080731 MSFT 00000097)
- [ 0.000000] ACPI: ECDT 77fc0630 00055 (v01 073108 OEMECDT 20080731 MSFT 00000097)
- [ 0.000000] ACPI: DBGP 77fc0400 00034 (v01 073108 DBGP1434 20080731 MSFT 00000097)
- [ 0.000000] Booting paravirtualized kernel on bare hardware
- [ 0.000000] NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:4 nr_node_ids:1
- [ 0.000000] PERCPU: Embedded 14 pages/cpu @c2400000 s34360 r0 d22984 u1048576
- [ 0.000000] pcpu-alloc: s34360 r0 d22984 u1048576 alloc=1*4194304
- [ 0.000000] pcpu-alloc: [0] 0 1 2 3
- [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 487495
- [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-686 root=UUID=845a7db6-1fd1-46ee-9771-579ad5975b32 ro quiet
- [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
- [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
- [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
- [ 0.000000] Enabling fast FPU save and restore... done.
- [ 0.000000] Enabling unmasked SIMD FPU exception support... done.
- [ 0.000000] Initializing CPU#0
- [ 0.000000] Initializing HighMem for node 0 (000373fe:00077fb8)
- [ 0.000000] Memory: 1934276k/1965792k available (2509k kernel code, 29928k reserved, 1331k data, 380k init, 1060584k highmem)
- [ 0.000000] virtual kernel memory layout:
- [ 0.000000] fixmap : 0xffd56000 - 0xfffff000 (2724 kB)
- [ 0.000000] pkmap : 0xff400000 - 0xff800000 (4096 kB)
- [ 0.000000] vmalloc : 0xf7bfe000 - 0xff3fe000 ( 120 MB)
- [ 0.000000] lowmem : 0xc0000000 - 0xf73fe000 ( 883 MB)
- [ 0.000000] .init : 0xc13c1000 - 0xc1420000 ( 380 kB)
- [ 0.000000] .data : 0xc12735eb - 0xc13c0504 (1331 kB)
- [ 0.000000] .text : 0xc1000000 - 0xc12735eb (2509 kB)
- [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
- [ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
- [ 0.000000] Hierarchical RCU implementation.
- [ 0.000000] NR_IRQS:1280
- [ 0.000000] Console: colour VGA+ 80x25
- [ 0.000000] console [tty0] enabled
- [ 0.000000] hpet clockevent registered
- [ 0.000000] Fast TSC calibration using PIT
- [ 0.000000] Detected 1500.292 MHz processor.
- [ 0.004008] Calibrating delay loop (skipped), value calculated using timer frequency.. 3000.58 BogoMIPS (lpj=6001168)
- [ 0.004034] Security Framework initialized
- [ 0.004040] SELinux: Disabled at boot.
- [ 0.004050] Mount-cache hash table entries: 512
- [ 0.004230] Initializing cgroup subsys ns
- [ 0.004236] Initializing cgroup subsys cpuacct
- [ 0.004242] Initializing cgroup subsys devices
- [ 0.004245] Initializing cgroup subsys freezer
- [ 0.004248] Initializing cgroup subsys net_cls
- [ 0.004281] CPU: L1 I cache: 32K, L1 D cache: 32K
- [ 0.004284] CPU: L2 cache: 512K
- [ 0.004291] mce: CPU supports 6 MCE banks
- [ 0.004301] CPU0: Thermal monitoring handled by SMI
- [ 0.004306] using mwait in idle threads.
- [ 0.004315] Performance Events: Core2 events, Intel PMU driver.
- [ 0.004323] ... version: 2
- [ 0.004325] ... bit width: 40
- [ 0.004327] ... generic registers: 2
- [ 0.004329] ... value mask: 000000ffffffffff
- [ 0.004332] ... max period: 000000007fffffff
- [ 0.004334] ... fixed-purpose events: 3
- [ 0.004336] ... event mask: 0000000700000003
- [ 0.004343] Checking 'hlt' instruction... OK.
- [ 0.020508] SMP alternatives: switching to UP code
- [ 0.026257] ACPI: Core revision 20090903
- [ 0.043821] Enabling APIC mode: Flat. Using 1 I/O APICs
- [ 0.044174] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
- [ 0.084197] CPU0: Intel(R) Celeron(R) D CPU 220 @ 1.20GHz stepping 01
- [ 0.088001] Brought up 1 CPUs
- [ 0.088001] Total of 1 processors activated (3000.58 BogoMIPS).
- [ 0.088001] CPU0 attaching NULL sched-domain.
- [ 0.088001] devtmpfs: initialized
- [ 0.088001] regulator: core version 0.5
- [ 0.088001] NET: Registered protocol family 16
- [ 0.088001] ACPI: bus type pci registered
- [ 0.088001] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
- [ 0.088001] PCI: Not using MMCONFIG.
- [ 0.088001] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=5
- [ 0.088001] PCI: Using configuration type 1 for base access
- [ 0.088001] bio: create slab <bio-0> at 0
- [ 0.088417] ACPI: EC: EC description table is found, configuring boot EC
- [ 0.089642] ACPI: Executed 1 blocks of module-level executable AML code
- [ 0.102065] ACPI: Interpreter enabled
- [ 0.102074] ACPI: (supports S0 S3 S4 S5)
- [ 0.102107] ACPI: Using IOAPIC for interrupt routing
- [ 0.102771] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
- [ 0.107094] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
- [ 0.107097] PCI: Using MMCONFIG for extended config space
- [ 0.114792] ACPI: EC: GPE = 0x19, I/O: command/status = 0x66, data = 0x62
- [ 0.115252] ACPI: No dock devices found.
- [ 0.115706] ACPI: PCI Root Bridge [PCI0] (0000:00)
- [ 0.115767] pci 0000:00:00.0: reg 10 32bit mmio: [0xf0000000-0xf7ffffff]
- [ 0.115952] pci 0000:00:03.0: reg 10 32bit mmio: [0xfd5ff000-0xfd5fffff]
- [ 0.116039] pci 0000:00:03.1: reg 10 32bit mmio: [0xfd5fe000-0xfd5fefff]
- [ 0.116112] pci 0000:00:03.3: reg 10 32bit mmio: [0xfd5fd000-0xfd5fdfff]
- [ 0.116173] pci 0000:00:03.3: PME# supported from D0 D3hot D3cold
- [ 0.116178] pci 0000:00:03.3: PME# disabled
- [ 0.116220] pci 0000:00:04.0: reg 10 32bit mmio: [0xfd5fcc00-0xfd5fcc7f]
- [ 0.116229] pci 0000:00:04.0: reg 14 io port: [0xbc00-0xbc7f]
- [ 0.116283] pci 0000:00:04.0: supports D1 D2
- [ 0.116286] pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold
- [ 0.116291] pci 0000:00:04.0: PME# disabled
- [ 0.116328] pci 0000:00:05.0: reg 10 io port: [0xb800-0xb807]
- [ 0.116336] pci 0000:00:05.0: reg 14 io port: [0xb400-0xb403]
- [ 0.116344] pci 0000:00:05.0: reg 18 io port: [0xb000-0xb007]
- [ 0.116352] pci 0000:00:05.0: reg 1c io port: [0xac00-0xac03]
- [ 0.116360] pci 0000:00:05.0: reg 20 io port: [0xa800-0xa80f]
- [ 0.116369] pci 0000:00:05.0: reg 24 io port: [0xa400-0xa47f]
- [ 0.116405] pci 0000:00:05.0: PME# supported from D3cold
- [ 0.116410] pci 0000:00:05.0: PME# disabled
- [ 0.116525] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
- [ 0.116531] pci 0000:00:06.0: PME# disabled
- [ 0.116652] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
- [ 0.116658] pci 0000:00:07.0: PME# disabled
- [ 0.116709] pci 0000:00:0d.0: reg 10 32bit mmio: [0x000000-0x000fff]
- [ 0.116740] pci 0000:00:0d.0: supports D1 D2
- [ 0.116742] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold
- [ 0.116747] pci 0000:00:0d.0: PME# disabled
- [ 0.116784] pci 0000:00:0d.1: reg 10 32bit mmio: [0xfd5fc800-0xfd5fc8ff]
- [ 0.116844] pci 0000:00:0d.1: supports D1 D2
- [ 0.116847] pci 0000:00:0d.1: PME# supported from D0 D1 D2 D3hot D3cold
- [ 0.116853] pci 0000:00:0d.1: PME# disabled
- [ 0.116889] pci 0000:00:0d.2: reg 10 32bit mmio: [0xfd5fc400-0xfd5fc4ff]
- [ 0.116949] pci 0000:00:0d.2: supports D1 D2
- [ 0.116952] pci 0000:00:0d.2: PME# supported from D0 D1 D2 D3hot D3cold
- [ 0.116957] pci 0000:00:0d.2: PME# disabled
- [ 0.117003] pci 0000:00:0f.0: reg 10 32bit mmio: [0xfd5f4000-0xfd5f7fff]
- [ 0.117064] pci 0000:00:0f.0: PME# supported from D0 D3hot D3cold
- [ 0.117069] pci 0000:00:0f.0: PME# disabled
- [ 0.117136] pci 0000:01:00.0: reg 10 32bit mmio pref: [0xc0000000-0xcfffffff]
- [ 0.117144] pci 0000:01:00.0: reg 14 32bit mmio: [0xfd6e0000-0xfd6fffff]
- [ 0.117151] pci 0000:01:00.0: reg 18 io port: [0xcc00-0xcc7f]
- [ 0.117196] pci 0000:01:00.0: supports D1 D2
- [ 0.117243] pci 0000:00:01.0: bridge io port: [0xc000-0xcfff]
- [ 0.117249] pci 0000:00:01.0: bridge 32bit mmio: [0xfd600000-0xfd6fffff]
- [ 0.117254] pci 0000:00:01.0: bridge 32bit mmio pref: [0xc0000000-0xcfffffff]
- [ 0.117328] pci 0000:02:00.0: reg 10 64bit mmio: [0xfd7f0000-0xfd7fffff]
- [ 0.117504] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
- [ 0.117607] pci 0000:00:06.0: bridge 32bit mmio: [0xfd700000-0xfd7fffff]
- [ 0.117673] pci 0000:00:07.0: bridge io port: [0xd000-0xdfff]
- [ 0.117678] pci 0000:00:07.0: bridge 32bit mmio: [0xfd800000-0xfe3fffff]
- [ 0.117687] pci 0000:00:07.0: bridge 64bit mmio pref: [0xde000000-0xdfffffff]
- [ 0.117722] pci_bus 0000:00: on NUMA node 0
- [ 0.117730] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
- [ 0.129727] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 *10 11 12 14 15)
- [ 0.129925] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 5 *7 10 11 12 14 15)
- [ 0.130113] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 7 10 11 12 14 15)
- [ 0.130300] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 12 *14 15)
- [ 0.130487] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 *11 12 14 15)
- [ 0.130674] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 7 10 11 12 14 15)
- [ 0.130860] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12 14 *15)
- [ 0.131047] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
- [ 0.131199] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
- [ 0.131203] vgaarb: loaded
- [ 0.131306] PCI: Using ACPI for IRQ routing
- [ 0.131572] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
- [ 0.131580] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
- [ 0.131586] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
- [ 0.136024] Switching to clocksource tsc
- [ 0.137686] pnp: PnP ACPI init
- [ 0.137718] ACPI: bus type pnp registered
- [ 0.141263] pnp: PnP ACPI: found 13 devices
- [ 0.141267] ACPI: ACPI bus type pnp unregistered
- [ 0.141272] PnPBIOS: Disabled by ACPI PNP
- [ 0.141291] system 00:06: ioport range 0x162e-0x162f has been reserved
- [ 0.141295] system 00:06: ioport range 0xa00-0xa0f has been reserved
- [ 0.141299] system 00:06: ioport range 0xa20-0xa20 has been reserved
- [ 0.141306] system 00:07: ioport range 0x290-0x297 has been reserved
- [ 0.141310] system 00:07: ioport range 0xc00-0xc05 has been reserved
- [ 0.141314] system 00:07: ioport range 0xd00-0xd05 has been reserved
- [ 0.141317] system 00:07: ioport range 0x480-0x48f has been reserved
- [ 0.141321] system 00:07: ioport range 0x4d0-0x4d1 has been reserved
- [ 0.141325] system 00:07: ioport range 0x800-0x87f has been reserved
- [ 0.141329] system 00:07: ioport range 0x880-0x8ff has been reserved
- [ 0.141333] system 00:07: ioport range 0xc00-0xc7f could not be reserved
- [ 0.141337] system 00:07: ioport range 0x2000-0x20fe has been reserved
- [ 0.141342] system 00:07: iomem range 0xfff80000-0xffffffff has been reserved
- [ 0.141346] system 00:07: iomem range 0xffb80000-0xffbfffff has been reserved
- [ 0.141350] system 00:07: iomem range 0xffee0000-0xffefffff has been reserved
- [ 0.141354] system 00:07: iomem range 0xfed10000-0xfed3ffff has been reserved
- [ 0.141361] system 00:0a: ioport range 0x250-0x253 has been reserved
- [ 0.141365] system 00:0a: ioport range 0x256-0x25f has been reserved
- [ 0.141369] system 00:0a: iomem range 0xfec00000-0xfec00fff could not be reserved
- [ 0.141373] system 00:0a: iomem range 0xfee00000-0xfee00fff has been reserved
- [ 0.141380] system 00:0b: iomem range 0xe0000000-0xefffffff has been reserved
- [ 0.141386] system 00:0c: iomem range 0x0-0x9ffff could not be reserved
- [ 0.141390] system 00:0c: iomem range 0xc0000-0xcffff could not be reserved
- [ 0.141394] system 00:0c: iomem range 0xe0000-0xfffff could not be reserved
- [ 0.141398] system 00:0c: iomem range 0x100000-0x77ffffff could not be reserved
- [ 0.141402] system 00:0c: iomem range 0xe0000000-0xffffffff could not be reserved
- [ 0.176482] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
- [ 0.176487] pci 0000:00:01.0: IO window: 0xc000-0xcfff
- [ 0.176493] pci 0000:00:01.0: MEM window: 0xfd600000-0xfd6fffff
- [ 0.176499] pci 0000:00:01.0: PREFETCH window: 0xc0000000-0xcfffffff
- [ 0.176507] pci 0000:00:06.0: PCI bridge, secondary bus 0000:02
- [ 0.176510] pci 0000:00:06.0: IO window: disabled
- [ 0.176516] pci 0000:00:06.0: MEM window: 0xfd700000-0xfd7fffff
- [ 0.176521] pci 0000:00:06.0: PREFETCH window: disabled
- [ 0.176529] pci 0000:00:07.0: PCI bridge, secondary bus 0000:03
- [ 0.176533] pci 0000:00:07.0: IO window: 0xd000-0xdfff
- [ 0.176540] pci 0000:00:07.0: MEM window: 0xfd800000-0xfe3fffff
- [ 0.176546] pci 0000:00:07.0: PREFETCH window: 0x000000de000000-0x000000dfffffff
- [ 0.176554] pci 0000:00:0d.0: CardBus bridge, secondary bus 0000:06
- [ 0.176557] pci 0000:00:0d.0: IO window: 0x001000-0x0010ff
- [ 0.176562] pci 0000:00:0d.0: IO window: 0x001400-0x0014ff
- [ 0.176568] pci 0000:00:0d.0: PREFETCH window: 0x78000000-0x7bffffff
- [ 0.176573] pci 0000:00:0d.0: MEM window: 0x7c000000-0x7fffffff
- [ 0.176588] pci 0000:00:01.0: setting latency timer to 64
- [ 0.176601] pci 0000:00:06.0: setting latency timer to 64
- [ 0.176613] pci 0000:00:07.0: setting latency timer to 64
- [ 0.176630] pci 0000:00:0d.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
- [ 0.176638] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
- [ 0.176641] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
- [ 0.176645] pci_bus 0000:01: resource 0 io: [0xc000-0xcfff]
- [ 0.176648] pci_bus 0000:01: resource 1 mem: [0xfd600000-0xfd6fffff]
- [ 0.176651] pci_bus 0000:01: resource 2 pref mem [0xc0000000-0xcfffffff]
- [ 0.176655] pci_bus 0000:02: resource 1 mem: [0xfd700000-0xfd7fffff]
- [ 0.176658] pci_bus 0000:03: resource 0 io: [0xd000-0xdfff]
- [ 0.176662] pci_bus 0000:03: resource 1 mem: [0xfd800000-0xfe3fffff]
- [ 0.176665] pci_bus 0000:03: resource 2 pref mem [0xde000000-0xdfffffff]
- [ 0.176669] pci_bus 0000:06: resource 0 io: [0x1000-0x10ff]
- [ 0.176672] pci_bus 0000:06: resource 1 io: [0x1400-0x14ff]
- [ 0.176675] pci_bus 0000:06: resource 2 pref mem [0x78000000-0x7bffffff]
- [ 0.176679] pci_bus 0000:06: resource 3 mem: [0x7c000000-0x7fffffff]
- [ 0.176719] NET: Registered protocol family 2
- [ 0.176828] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
- [ 0.177177] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
- [ 0.178104] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
- [ 0.178659] TCP: Hash tables configured (established 131072 bind 65536)
- [ 0.178665] TCP reno registered
- [ 0.178844] NET: Registered protocol family 1
- [ 0.178913] pci 0000:00:03.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
- [ 0.215949] pci 0000:00:03.0: PCI INT A disabled
- [ 0.215963] pci 0000:00:03.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
- [ 0.239940] pci 0000:00:03.1: PCI INT B disabled
- [ 0.239955] pci 0000:00:03.3: PCI INT C -> GSI 22 (level, low) -> IRQ 22
- [ 0.239970] pci 0000:00:03.3: PCI INT C disabled
- [ 0.239986] pci 0000:01:00.0: Boot video device
- [ 0.240058] Unpacking initramfs...
- [ 0.568164] Freeing initrd memory: 8526k freed
- [ 0.573685] Simple Boot Flag at 0x71 set to 0x1
- [ 0.574050] audit: initializing netlink socket (disabled)
- [ 0.574072] type=2000 audit(1368472514.571:1): initialized
- [ 0.578727] highmem bounce pool size: 64 pages
- [ 0.578733] HugeTLB registered 4 MB page size, pre-allocated 0 pages
- [ 0.580439] VFS: Disk quotas dquot_6.5.2
- [ 0.580511] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
- [ 0.580611] msgmni has been set to 1725
- [ 0.580858] alg: No test for stdrng (krng)
- [ 0.580930] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
- [ 0.580934] io scheduler noop registered
- [ 0.580937] io scheduler anticipatory registered
- [ 0.580939] io scheduler deadline registered
- [ 0.580980] io scheduler cfq registered (default)
- [ 0.581144] pcieport 0000:00:06.0: irq 24 for MSI/MSI-X
- [ 0.581156] pcieport 0000:00:06.0: setting latency timer to 64
- [ 0.581312] pcieport 0000:00:07.0: irq 25 for MSI/MSI-X
- [ 0.581322] pcieport 0000:00:07.0: setting latency timer to 64
- [ 0.581520] isapnp: Scanning for PnP cards...
- [ 0.935044] isapnp: No Plug & Play device found
- [ 0.936859] Linux agpgart interface v0.103
- [ 0.936962] agpgart-sis 0000:00:00.0: SiS chipset [1039/0671]
- [ 0.944932] agpgart-sis 0000:00:00.0: AGP aperture is 128M @ 0xf0000000
- [ 0.944982] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
- [ 0.945523] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
- [ 0.947347] i8042.c: Detected active multiplexing controller, rev 1.1.
- [ 0.948399] serio: i8042 KBD port at 0x60,0x64 irq 1
- [ 0.948411] serio: i8042 AUX0 port at 0x60,0x64 irq 12
- [ 0.948449] serio: i8042 AUX1 port at 0x60,0x64 irq 12
- [ 0.948473] serio: i8042 AUX2 port at 0x60,0x64 irq 12
- [ 0.948496] serio: i8042 AUX3 port at 0x60,0x64 irq 12
- [ 0.948622] mice: PS/2 mouse device common for all mice
- [ 0.948697] rtc_cmos 00:09: RTC can wake from S4
- [ 0.948758] rtc_cmos 00:09: rtc core: registered rtc_cmos as rtc0
- [ 0.948784] rtc0: alarms up to one year, 114 bytes nvram, hpet irqs
- [ 0.948799] cpuidle: using governor ladder
- [ 0.948802] cpuidle: using governor menu
- [ 0.948808] No iBFT detected.
- [ 0.949210] TCP cubic registered
- [ 0.949380] NET: Registered protocol family 10
- [ 0.950235] Mobile IPv6
- [ 0.950239] NET: Registered protocol family 17
- [ 0.950267] Using IPI No-Shortcut mode
- [ 0.950369] PM: Resume from disk failed.
- [ 0.950385] registered taskstats version 1
- [ 0.950748] rtc_cmos 00:09: setting system clock to 2013-05-13 19:15:15 UTC (1368472515)
- [ 0.950801] Initalizing network drop monitor service
- [ 0.950839] Freeing unused kernel memory: 380k freed
- [ 0.951050] Write protecting the kernel text: 2512k
- [ 0.951072] Write protecting the kernel read-only data: 924k
- [ 0.978019] udev[46]: starting version 164
- [ 0.980934] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
- [ 1.237783] thermal LNXTHERM:01: registered as thermal_zone0
- [ 1.237796] ACPI: Thermal Zone [THRM] (54 C)
- [ 1.299018] sis190 Gigabit Ethernet driver 1.3 loaded.
- [ 1.299052] sis190 0000:00:04.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
- [ 1.299066] sis190 0000:00:04.0: setting latency timer to 64
- [ 1.299090] 0000:00:04.0: Read MAC address from EEPROM
- [ 1.299094] 0000:00:04.0: Error EEPROM read 0.
- [ 1.299097] 0000:00:04.0: Read MAC address from APC.
- [ 1.299572] usbcore: registered new interface driver usbfs
- [ 1.299862] usbcore: registered new interface driver hub
- [ 1.300202] usbcore: registered new device driver usb
- [ 1.306066] SCSI subsystem initialized
- [ 1.309582] sdhci: Secure Digital Host Controller Interface driver
- [ 1.309587] sdhci: Copyright(c) Pierre Ossman
- [ 1.311359] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 1.336077] libata version 3.00 loaded.
- [ 1.356010] 0000:00:04.0: Realtek PHY RTL8201 transceiver at address 1.
- [ 1.852008] 0000:00:04.0: Using transceiver at address 1 as default.
- [ 1.884697] 0000:00:04.0: SiS 191 PCI Gigabit Ethernet adapter at f7d76c00 (IRQ: 19), 00:22:15:9a:ac:37
- [ 1.884701] eth0: GMII mode.
- [ 1.884708] eth0: Enabling Auto-negotiation.
- [ 1.916077] ehci_hcd 0000:00:03.3: PCI INT C -> GSI 22 (level, low) -> IRQ 22
- [ 1.916111] ehci_hcd 0000:00:03.3: EHCI Host Controller
- [ 1.916147] ehci_hcd 0000:00:03.3: new USB bus registered, assigned bus number 1
- [ 1.916203] ehci_hcd 0000:00:03.3: irq 22, io mem 0xfd5fd000
- [ 1.928014] ehci_hcd 0000:00:03.3: USB 2.0 started, EHCI 1.00
- [ 1.928049] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
- [ 1.928052] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 1.928056] usb usb1: Product: EHCI Host Controller
- [ 1.928059] usb usb1: Manufacturer: Linux 2.6.32-5-686 ehci_hcd
- [ 1.928061] usb usb1: SerialNumber: 0000:00:03.3
- [ 1.928180] usb usb1: configuration #1 chosen from 1 choice
- [ 1.928219] hub 1-0:1.0: USB hub found
- [ 1.928230] hub 1-0:1.0: 8 ports detected
- [ 1.930762] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
- [ 1.930798] sdhci-pci 0000:00:0d.1: SDHCI controller found [1180:0822] (rev 18)
- [ 1.930817] sdhci-pci 0000:00:0d.1: PCI INT C -> GSI 19 (level, low) -> IRQ 19
- [ 1.931847] sdhci-pci 0000:00:0d.1: Will use DMA mode even though HW doesn't fully claim to support it.
- [ 1.932906] Registered led device: mmc0::
- [ 1.934595] mmc0: SDHCI controller on PCI [0000:00:0d.1] using DMA
- [ 1.934627] sata_sis 0000:00:05.0: version 1.0
- [ 1.934648] sata_sis 0000:00:05.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
- [ 1.934654] sata_sis 0000:00:05.0: Detected SiS 1183/966/966L/968/680 controller in PATA mode
- [ 1.936406] scsi0 : sata_sis
- [ 1.936643] scsi1 : sata_sis
- [ 1.937492] ata1: PATA max UDMA/133 cmd 0xb800 ctl 0xb400 bmdma 0xa800 irq 17
- [ 1.937496] ata2: PATA max UDMA/133 cmd 0xb000 ctl 0xac00 bmdma 0xa808 irq 17
- [ 1.937755] ohci_hcd 0000:00:03.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
- [ 1.937791] ohci_hcd 0000:00:03.0: OHCI Host Controller
- [ 1.937810] ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 2
- [ 1.937843] ohci_hcd 0000:00:03.0: irq 20, io mem 0xfd5ff000
- [ 1.994030] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
- [ 1.994035] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 1.994038] usb usb2: Product: OHCI Host Controller
- [ 1.994041] usb usb2: Manufacturer: Linux 2.6.32-5-686 ohci_hcd
- [ 1.994044] usb usb2: SerialNumber: 0000:00:03.0
- [ 1.994281] usb usb2: configuration #1 chosen from 1 choice
- [ 1.994403] hub 2-0:1.0: USB hub found
- [ 1.994420] hub 2-0:1.0: 4 ports detected
- [ 1.994499] ohci_hcd 0000:00:03.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
- [ 1.994532] ohci_hcd 0000:00:03.1: OHCI Host Controller
- [ 1.994543] ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 3
- [ 1.994571] ohci_hcd 0000:00:03.1: irq 21, io mem 0xfd5fe000
- [ 2.050027] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
- [ 2.050031] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 2.050035] usb usb3: Product: OHCI Host Controller
- [ 2.050038] usb usb3: Manufacturer: Linux 2.6.32-5-686 ohci_hcd
- [ 2.050041] usb usb3: SerialNumber: 0000:00:03.1
- [ 2.050274] usb usb3: configuration #1 chosen from 1 choice
- [ 2.050406] hub 3-0:1.0: USB hub found
- [ 2.050425] hub 3-0:1.0: 4 ports detected
- [ 2.116401] ata1.00: ATA-8: SAMSUNG HM500JI, 2AC101C4, max UDMA/133
- [ 2.116406] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
- [ 2.140388] ata1.00: configured for UDMA/133
- [ 2.140547] scsi 0:0:0:0: Direct-Access ATA SAMSUNG HM500JI 2AC1 PQ: 0 ANSI: 5
- [ 2.248549] mmc0: new high speed SD card at address 0002
- [ 2.253027] mmcblk0: mmc0:0002 00000 1.86 GiB
- [ 2.253093] mmcblk0: p1
- [ 2.256594] mmcblk0: p1 size 3931905 exceeds device capacity, limited to end of disk
- [ 2.304241] ata2.00: ATAPI: HL-DT-ST DVDRAM GSA-T50N, RR04, max UDMA/133
- [ 2.320263] ata2.00: configured for UDMA/133
- [ 2.325652] scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-T50N RR04 PQ: 0 ANSI: 5
- [ 2.325652] scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-T50N RR04 PQ: 0 ANSI: 5
- [ 2.355748] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
- [ 2.355816] sd 0:0:0:0: [sda] Write Protect is off
- [ 2.355820] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
- [ 2.355848] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 2.356065] sda:sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
- [ 2.368379] Uniform CD-ROM driver Revision: 3.20
- [ 2.369095] sr 1:0:0:0: Attached scsi CD-ROM sr0
- [ 2.383408] sda1 sda2 sda3 < sda5 sda6 >
- [ 2.426305] sd 0:0:0:0: [sda] Attached SCSI disk
- [ 2.438728] sd 0:0:0:0: Attached scsi generic sg0 type 0
- [ 2.439884] sr 1:0:0:0: Attached scsi generic sg1 type 5
- [ 3.110276] PM: Starting manual resume from disk
- [ 3.110282] PM: Resume from partition 8:6
- [ 3.110284] PM: Checking hibernation image.
- [ 3.110497] PM: Error -22 checking image file
- [ 3.110499] PM: Resume from disk failed.
- [ 3.182922] EXT4-fs (sda5): mounted filesystem with ordered data mode
- [ 4.641642] udev[321]: starting version 164
- [ 5.479720] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
- [ 5.479732] ACPI: Power Button [PWRB]
- [ 5.480423] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
- [ 5.480439] ACPI: Sleep Button [SLPB]
- [ 5.480641] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input3
- [ 5.480823] acpi device:16: registered as cooling_device0
- [ 5.481542] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/device:14/LNXVIDEO:00/input/input4
- [ 5.481553] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
- [ 5.483540] ACPI: Lid Switch [LID]
- [ 5.487570] Monitor-Mwait will be used to enter C-1 state
- [ 5.488101] processor LNXCPU:00: registered as cooling_device1
- [ 5.491943] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
- [ 5.492162] ACPI: Power Button [PWRF]
- [ 5.525851] ACPI: Battery Slot [BAT0] (battery present)
- [ 5.526022] ACPI: AC Adapter [AC0] (on-line)
- [ 5.737819] input: PC Speaker as /devices/platform/pcspkr/input/input6
- [ 6.121457] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
- [ 6.127898] asus_laptop: Asus Laptop Support version 0.42
- [ 6.134205] asus_laptop: X58C model detected
- [ 6.135860] input: Asus Laptop extra buttons as /devices/virtual/input/input7
- [ 6.138561] asus_laptop: Brightness ignored, must be controlled by ACPI video driver
- [ 6.165526] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
- [ 6.170168] yenta_cardbus 0000:00:0d.0: CardBus bridge found [1043:1777]
- [ 6.273532] Error: Driver 'pcspkr' is already registered, aborting...
- [ 6.296934] yenta_cardbus 0000:00:0d.0: ISA IRQ mask 0x0cb8, PCI irq 17
- [ 6.296939] yenta_cardbus 0000:00:0d.0: Socket status: 30000006
- [ 6.298814] HDA Intel 0000:00:0f.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
- [ 6.298890] HDA Intel 0000:00:0f.0: setting latency timer to 64
- [ 6.353490] Synaptics Touchpad, model: 1, fw: 6.1, id: 0xa3a0b3, caps: 0xa04713/0x10008/0x0
- [ 6.393538] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input8
- [ 6.465533] hda_codec: ALC660-VD: BIOS auto-probing.
- [ 6.466369] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:0f.0/input/input9
- [ 6.605129] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: clean.
- [ 6.606859] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: clean.
- [ 6.607571] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean.
- [ 6.607625] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: excluding 0xc08-0xc7f
- [ 6.608196] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean.
- [ 7.042702] Adding 4153336k swap on /dev/sda6. Priority:-1 extents:1 across:4153336k
- [ 7.388697] loop: module loaded
- [ 9.346535] ADDRCONF(NETDEV_UP): eth0: link is not ready
- [ 11.027266] RPC: Registered udp transport module.
- [ 11.027270] RPC: Registered tcp transport module.
- [ 11.027272] RPC: Registered tcp NFSv4.1 backchannel transport module.
- [ 11.287030] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
- [ 11.426552] svc: failed to register lockdv1 RPC service (errno 97).
- [ 11.428781] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
- [ 11.444924] NFSD: starting 90-second grace period
- [ 11.690153] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input10
- [ 11.952767] apm: BIOS not found.
- [ 13.075724] Bluetooth: Core ver 2.15
- [ 13.075812] NET: Registered protocol family 31
- [ 13.075815] Bluetooth: HCI device and connection manager initialized
- [ 13.075818] Bluetooth: HCI socket layer initialized
- [ 13.132488] Bluetooth: L2CAP ver 2.14
- [ 13.132492] Bluetooth: L2CAP socket layer initialized
- [ 13.141439] Bluetooth: RFCOMM TTY layer initialized
- [ 13.141446] Bluetooth: RFCOMM socket layer initialized
- [ 13.141449] Bluetooth: RFCOMM ver 1.11
- [ 13.145363] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
- [ 13.145367] Bluetooth: BNEP filters: protocol multicast
- [ 13.182795] Bridge firewalling registered
- [ 13.210417] Bluetooth: SCO (Voice Link) ver 0.6
- [ 13.210421] Bluetooth: SCO socket layer initialized
- [ 13.452876] lp: driver loaded but no devices found
- [ 13.470750] ppdev: user-space parallel port driver
- [ 19.376023] eth0: mii ext = 0000.
- [ 19.400016] eth0: mii lpa=cde1 adv=01e1 exp=0001.
- [ 19.416015] eth0: link on unknown mode.
- [ 19.416278] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
- [ 19.448022] eth0: mii ext = 0000.
- [ 19.472021] eth0: mii lpa=cde1 adv=01e1 exp=0001.
- [ 19.488026] eth0: link on unknown mode.
- [ 30.336008] eth0: no IPv6 routers present
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement