spl: not an uImage at 1600
ready
DRAM:  1 GiB
MMC:   SUNXI SD/MMC: 0
*** Warning - bad CRC, using default environment

In:    serial
Out:   serial
Err:   serial
Net:   dwmac.1c50000
Hit any key to stop autoboot:  2  1 reading zImage-ipfire-multi
22849 bytes read in 89 ms (250 KiB/s)
Kernel image @ 0x46000000 [ 0x000000 - 0x3afbd8 ]
## Flattened Device Tree blob at 49000000
   Booting using the fdt blob at 0x49000000
   Using Device Tree in place at 49000000, end 49008940

Starting kernel ...

Booting Linux on physical CPU 0x0
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.14.25-ipfire-multi (root@odroid-x) (gcc version 4.4.7 (GCC) ) #1 SMP Sun Nov 23 04:01:31 GMT 2014
CPUry cgroups
Memory: 1023500K/1048576K available (7260K kernel code, 797K rwdata, 2864K rodata, 668K init, 779K bss, 25076K reserved, 270336K highmem)
Virtual kernel memory layout:
    vector  : 0xffff0000 - 0xffff1000   (   4 kB)
    fixmap  : 0xfff00002
NR_IRQS:16 nr_irqs:16 16
Architected cp15 timer(s) running at 24.00MHz (phys).
sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 2863311519744ns
Switching to timer-based delay loop
sched_clock: 32 bits at 24MHz, resolution 41ns, wraps ever minimum: 501
Security Framework initialized
Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
CPU: Testing write buffer coherency: ok
ftrace: allocating 25414 entries in 75 pages
/cpus/cpu@0 missing clock-frequencypinctrl subsystem
regulator-dummy: no parameters
NET: Registered protocol family 16
DMA: preallocated 256 KiB pool for atomic coherent allocations
hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
hw-breakpoint: maximum watchnot find pctldev for node /soc@01c00000/pinctrl@01c20800/ahci_pwr_pin@0, deferring probe
platform ahci-5v.4: Driver reg-fixed-voltage requests probe deferral
reg-fixed-voltage usb1-vbus.5: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/usoaded
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
media: Linux media interface: v0.10
Linux video capture interface: v2.00
Switched reno registered
UDP hash table entries: 512 (order: 2, 16384 bytes)
UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
NET: Registered protocol family 1
hw perfevents: enabled with ARMv7 Cortex-A7 PMU driver, 5 counters available
futex hash tablt MMIO 0x1c28000 (irq = 33, base_baud = 1500000) is a U6_16550A
console [ttyS0] enabled
dw-apb-uart 1c29800.serial: Couldn't set LCR to 0
1c29800.serial: ttyS1 at MMIO 0x1c29800 (irq = 51, base_baud = 1500000) is a U6_16550A
dw-apb-uart 1c29c00.serial: Couldn't set LCR to 0
Serial: AMBA driver
Non-volatile memory driver v1.3
loop: module loaded
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
platform 1c14000.usb: Driver ehci-platform requests probe deferral
platform 1c1c000.usb: Driver ehci-platform requests probe deferral
ehci-orion: EHCI orion driver
sunxi-rtc 1c20d00.rtc: rtc core: registered rtc-sunxi as rtc0
sunxi-rtc 1c20d00.rtc: RTC enabled
input: axp20x-pek as /devices/soc.3/1c2ac00.i2c/i2c-0/0-0034/axp20x-pek/input/input0
LDO2: 1800 <--> 3300 mV at 3000 mV
LDO4: 1250 <--> 3300 mV at 2800 mV
DCDC2: 700 <--> 2275 mV at 1400 mV
device-mapper: uevent: version 1.0.3
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sunxi-mmc 1c0f000.mmc: base:0xf00cc000 irq:64
ledtrig-cpu: registered to indicate activity on CPUs
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
ip_tables: (C) 2000-2006 Netfilter Core Team
TCP: cubic registered
Initializing XFRM netlink socket
ip6_tables: (C) 2000-2006 Netfilter Core Team
Bridge firewalling registered
ThumbEE CPU extension supported.
Registering SWP/SWPB emulation handler
LDO4: disabling
regulator-dummy: disabling
ahci-5v: 5000 mV
usb1-vbus: 5000 mV
ehci-platform 1c14000.usb: EHCI Host Controller
ehci-platform 1c14000.usb: new USB bus registered, assigned bus number 1
ehci-platform 1c14000.usb: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
ehci-platform 1c1c000.usb: EHCI Host Controller
ehci-platform 1c1c000.usb: irq 72, io mem 0x01c1c000
hub 2-0:1.0: 1 port detected
omap_vout:Could not register Video driver
md: Autodetecting RAID arrays.
md: Scanned 0 and added 0 devices.
md: autorun ...
md: ... autorun DONE.
mmcblk0: mmc0:0001 00000 14.6 GiB
EXT4-fs (mmcblk0p3): couldn't mount as ext3 due to feature incompatibilities
VFS: Mounted root (ext4 filesystem) readonly on device 179:3.
devtmpfs: mounted
request_module: runaway loop modprobe binfmt-ffff
Starting init: /sbin/init exists but couldn't execute it (error -8)
re-multi #1
[<c0114c40>] (unwind_backtrace+0x0/0x148) from [<c010eb0c>] (show_stack+0x20/0x24)
[<c010eb0c>] (show_stack+0x20/0x24) from [<c0811720>] (dump_stack+0x74/0x94)
[<c0811720>] (dump_stack+0x74/0x94) from [<c0811448>] (panic+0x9c/0x1f4)
[<c0811448>] (panic+0x9c/0x1f4) from [<c080f1b8>] (kernel_init+0xe4/0x10c)
[<c080f1b8>] (kernel_init+0xe4/0x10c) from [<c0108730>] (ret_from_fork+0x14/0x20)
CPU0: stopping
CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.14.25-ipfire-multi #1
[<c0114c40>] (unwind_4) from [<c0100cc4>] (gic_handle_irq+0x68/0x70)
[<c0100cc4>] (gic_handle_irq+0x68/0x70) from [<c010f738>] (__irq_svc+0x78/0xb4)
Exception stack(0xc0d01f18 to 0xc0d01f60)
1f00:                                                       eefda888 00000000
1f20: 000009e2 c011f460 c0d00000 c0dc7440 c0d08570 c0c733a0 c0d084f8 c0db7104
1f40: c0db7104 c0d01f74 c0d01f78 c0d01f68 c0109354 c0109358 60000113 ffffffff
[<c010f738>] (__irq_svc+0x78/0xb4) from [<c0109358>] (arch_cpu_idle+0x40/0x4c)
[<c0109358>] (arch_cpu