API tools faq
paste
Advertisement
Guest User

Untitled

a guest
Dec 19th, 2014
494
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 57.18 KB | None | 0 0
raw download clone embed print report
  1. DDR Version 1.00 20141007
  2. In
  3. SRX
  4. Channel a: DDR3 200MHz
  5. Bus Width=32 Col=10 Bank=8 Row=15 CS=1 Die Bus-Width=16 Size=1024MB
  6. Channel b: DDR3 200MHz
  7. Bus Width=32 Col=10 Bank=8 Row=15 CS=1 Die Bus-Width=16 Size=1024MB
  8. OUT
  9.  
  10.  
  11. U-Boot 2014.10-RK3288-02 (Nov 26 2014 - 09:28:44)
  12.  
  13. CPU: rk3288
  14. CPU's clock information:
  15. arm pll = 600000000HZ
  16. periph pll = 300000000HZ
  17. ddr pll = 200000000HZ
  18. codec pll = 594000000HZ
  19. Board: Rockchip platform Board
  20. DRAM: Found dram banks:1
  21. Adding bank:0000000000000000(0000000080000000)
  22. 128 MiB
  23. storage init OK!
  24. Using default environment
  25.  
  26. GetParam
  27. check parameter success
  28. Unknow param: MACHINE_MODEL:rk30sdk!
  29. Unknow param: MACHINE_ID:007!
  30. Unknow param: MANUFACTURER:RK30SDK!
  31. Unknow param: PWR_HLD: 0,0,A,0,1!
  32. failed to prepare fdt from boot!
  33. power key: bank-0 pin-5
  34. can't find dts node for ricoh619
  35. pmic:act8846
  36. Can't find dts node for fuel guage cw201x
  37. SecureBootEn = 0, SecureBootLock = 0
  38.  
  39. #Boot ver: 2014-11-26#2.17
  40. sn:****************
  41. checkKey
  42. vbus = 0
  43. no fuel gauge found
  44. no fuel gauge found
  45. read logo_on switch from dts [0]
  46. no fuel gauge found
  47. Hit any key to stop autoboot: 0
  48. failed to load fdt from boot!
  49. kernel @ 0x02000000 (0x005f5168)
  50. ramdisk @ 0x04bf0000 (0x00120f47)
  51. Secure Boot state: 0
  52. bootrk: do_bootm_linux...
  53. Loading Device Tree to 0480c000, end 048270d3 ... OK
  54. Add bank:0000000000000000, 0000000080000000
  55.  
  56. Starting kernel ...
  57.  
  58. <hit enter to activate fiq debugger>
  59. [ 0.000000] Booting Linux on physical CPU 0x500
  60. [ 0.000000] Initializing cgroup subsys cpu
  61. [ 0.000000] Initializing cgroup subsys cpuacct
  62. [ 0.000000] Linux version 3.10.0 (dujw@tchipserver2) (gcc version 4.6.x-google 20120106 (prerelease) (GCC) ) #56 SMP PREEMPT Wed Dec 3 10:21:49 CST 2014
  63. [ 0.000000] CPU: ARMv7 Processor [410fc0d1] revision 1 (ARMv7), cr=10c5387d
  64. [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
  65. [ 0.000000] Machine: Rockchip RK3288 (Flattened Device Tree), model: rockchip,rk3288
  66. [ 0.000000] hdmi init vic is -1
  67. [ 0.000000] rockchip_ion_reserve
  68. [ 0.000000] cma: CMA: reserved 16 MiB at 2e800000
  69. [ 0.000000] Memory policy: ECC disabled, Data cache writealloc
  70. [ 0.000000] Boot mode: REBOOT (6) flag: NORMAL (0xc3524200)
  71. [ 0.000000] PERCPU: Embedded 9 pages/cpu @c1eb0000 s14016 r8192 d14656 u36864
  72. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 522768
  73. [ 0.000000] Kernel command line: console=ttyFIQ0 androidboot.hardware=rk30board androidboot.console=ttyFIQ0 board.ap_has_alsa=0 root=/dev/block/mtd/by-name/linuxroot rw rootfstype=ext4 init=/sbin/init mtdparts=rk29xxnand:0x00002000@0x00002000(uboot),0x00002000@0x00004000(misc),0x00008000@0x00006000(resource),0x00008000@0x0000e000(kernel),0x00010000@0x00016000(boot),0x00010000@0x00026000(recovery),0x0001a000@0x00036000(backup),0x00040000@0x00050000(cache),0x00002000@0x00090000(kpanic),0x00180000@0x00092000(system),0x00002000@0x00212000(metadata),0x00200000@0x00214000(userdata),0x00620000@0x00414000(linuxroot),-@0x00a34000(user) storagemedia=emmc loader.timestamp=2014-11-26_09:28:44 hdmi.vic=-1 androidboot.serialno=****************
  74. [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
  75. [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
  76. [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
  77. [ 0.000000] Memory: 2048MB = 2048MB total
  78. [ 0.000000] Memory: 2047108k/2047108k available, 50044k reserved, 1318912K highmem
  79. [ 0.000000] Virtual kernel memory layout:
  80. [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  81. [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
  82. [ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB)
  83. [ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB)
  84. [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
  85. [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
  86. [ 0.000000] .text : 0xc0008000 - 0xc0a70b48 (10659 kB)
  87. [ 0.000000] .init : 0xc0a71000 - 0xc0cc06c0 (2366 kB)
  88. [ 0.000000] .data : 0xc0cc2000 - 0xc0d5ec88 ( 628 kB)
  89. [ 0.000000] .bss : 0xc0d5ec88 - 0xc0e78e04 (1129 kB)
  90. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
  91. [ 0.000000] Preemptible hierarchical RCU implementation.
  92. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
  93. [ 0.000000] NR_IRQS:16 nr_irqs:16 16
  94. [ 0.000000] rk_clk_tree_init start! cru base = 0xfed00000
  95. [ 0.000000] rk_get_uboot_display_flag: uboot_logo_on = 0
  96. [ 0.000000] rkclk_init_clks: cnt_parent = 7
  97. [ 0.000000] rkclk_init_clks: cnt_rate = 32
  98. [ 0.000000] Architected local timer running at 24.00MHz (phys).
  99. [ 0.000000] Switching to timer-based delay loop
  100. [ 0.000000] sched_clock: ARM arch timer >56 bits at 24000kHz, resolution 41ns
  101. [ 0.000000] process version: 0
  102. [ 0.000000] channel:0, lkg:0
  103. [ 0.000000] target-temp:95
  104. [ 0.000000] channel:2, lkg:0
  105. [ 0.000000] target-temp:95
  106. [ 0.000000] channel:0, lkg:0
  107. [ 0.000000] target-temp:95
  108. [ 0.000000] channel:1, lkg:0
  109. [ 0.000000] target-temp:95
  110. [ 0.000000] sched_clock: 32 bits at 100 Hz, resolution 10000000ns, wraps every 4294967286ms
  111. [ 0.525276] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000)
  112. [ 0.525329] pid_max: default: 32768 minimum: 301
  113. [ 0.525665] Security Framework initialized
  114. [ 0.525708] SELinux: Initializing.
  115. [ 0.525936] Mount-cache hash table entries: 512
  116. [ 0.527983] Initializing cgroup subsys debug
  117. [ 0.528027] Initializing cgroup subsys freezer
  118. [ 0.528117] CPU: Testing write buffer coherency: ok
  119. [ 0.528880] /cpus/cpu@0 missing clock-frequency property
  120. [ 0.528925] /cpus/cpu@1 missing clock-frequency property
  121. [ 0.528959] /cpus/cpu@2 missing clock-frequency property
  122. [ 0.528991] /cpus/cpu@3 missing clock-frequency property
  123. [ 0.529110] CPU0: thread -1, cpu 0, socket 5, mpidr 80000500
  124. [ 0.529221] Setting up static identity map for 0xc07867f8 - 0xc0786850
  125. [ 0.533837] last_log: 0x2e100000 map to 0xf0004000 and copy to 0xf0086000, size 0x80000 early 0x1551 (version 3.0)
  126. [ 0.613168] CPU1: Booted secondary processor
  127. [ 0.613260] CPU1: thread -1, cpu 1, socket 5, mpidr 80000501
  128. [ 0.632890] CPU2: Booted secondary processor
  129. [ 0.632972] CPU2: thread -1, cpu 2, socket 5, mpidr 80000502
  130. [ 0.652670] CPU3: Booted secondary processor
  131. [ 0.652751] CPU3: thread -1, cpu 3, socket 5, mpidr 80000503
  132. [ 0.653121] Brought up 4 CPUs
  133. [ 0.653219] SMP: Total of 4 processors activated (192.00 BogoMIPS).
  134. [ 0.653250] CPU: All CPU(s) started in SVC mode.
  135. [ 0.655489] devtmpfs: initialized
  136. [ 0.673774] pinctrl core: initialized pinctrl subsystem
  137. [ 0.674509] regulator-dummy: no parameters
  138. [ 0.676157] NET: Registered protocol family 16
  139. [ 0.681797] DMA: preallocated 256 KiB pool for atomic coherent allocations
  140. [ 0.682783] ion_snapshot: 0x2e230000 map to 0xf0107000 and copy to 0xc0e54454 (version 0.1)
  141. [ 0.683276] Registered FIQ tty driver
  142. [ 0.686817] console [ttyFIQ0] enabled
  143. [ 0.687287] Registered fiq debugger ttyFIQ0
  144. [ 0.689427] rockchip_get_bank_data:name=base start=0xff750000,end=0xff7500ff
  145. [ 0.689514] rockchip_get_bank_data:name=mux_bank0 start=0xff730084,end=0xff73008f
  146. [ 0.689586] rockchip_get_bank_data:name=pull_bank0 start=0xff730064,end=0xff73006f
  147. [ 0.689657] rockchip_get_bank_data:name=drv_bank0 start=0xff730070,end=0xff73007b
  148. [ 0.689917] rockchip_get_bank_data:name=/pinctrl@ff770000/gpio1@ff780000 start=0xff780000,end=0xff7800ff
  149. [ 0.690148] rockchip_get_bank_data:name=/pinctrl@ff770000/gpio2@ff790000 start=0xff790000,end=0xff7900ff
  150. [ 0.690376] rockchip_get_bank_data:name=/pinctrl@ff770000/gpio3@ff7a0000 start=0xff7a0000,end=0xff7a00ff
  151. [ 0.690601] rockchip_get_bank_data:name=/pinctrl@ff770000/gpio4@ff7b0000 start=0xff7b0000,end=0xff7b00ff
  152. [ 0.690822] rockchip_get_bank_data:name=/pinctrl@ff770000/gpio5@ff7c0000 start=0xff7c0000,end=0xff7c00ff
  153. [ 0.691048] rockchip_get_bank_data:name=/pinctrl@ff770000/gpio6@ff7d0000 start=0xff7d0000,end=0xff7d00ff
  154. [ 0.691273] rockchip_get_bank_data:name=/pinctrl@ff770000/gpio7@ff7e0000 start=0xff7e0000,end=0xff7e00ff
  155. [ 0.691497] rockchip_get_bank_data:name=/pinctrl@ff770000/gpio8@ff7f0000 start=0xff7f0000,end=0xff7f00ff
  156. [ 0.691736] rockchip_get_bank_data:name=/pinctrl@ff770000/gpio15@ff7f2000 start=0xff7f2000,end=0xff7f20ff
  157. [ 0.691973] rockchip_pinctrl_probe:name=RK3288-GPIO,type=3
  158. [ 0.692029] rockchip_pinctrl_probe:name=base start=0xff770000,end=0xff77013f
  159. [ 0.692081] rockchip_pinctrl_probe:name=pull start=0xff770140,end=0xff7701bf
  160. [ 0.692186] rockchip_pinctrl_probe:name=drv start=0xff7701c0,end=0xff77023f
  161. [ 0.693926] rockchip_interrupts_register:bank_num=7
  162. [ 0.700554] of_get_gpio_init_config:gpio[0] = 256, value = 0
  163. [ 0.700638] of_get_gpio_init_config:gpio[1] = 233, value = 0
  164. [ 0.700718] of_get_gpio_init_config:gpio[2] = 136, value = 0
  165. [ 0.700893] rockchip_pinctrl_probe:init ok
  166. [ 0.720847] rk_iommu ff900800.iep_mmu: (iep) Enter
  167. [ 0.721195] IOVMM: Created 0x3ffff000 B IOVMM from 0x10000000.
  168. [ 0.721250] rk_iommu ff900800.iep_mmu: (iep) Initialized
  169. [ 0.721866] rk_iommu ff950800.vip_mmu: (vip) Enter
  170. [ 0.722190] IOVMM: Created 0x3ffff000 B IOVMM from 0x10000000.
  171. [ 0.722242] rk_iommu ff950800.vip_mmu: (vip) Initialized
  172. [ 0.722794] rk_iommu ff930300.vopb_mmu: (vopb) Enter
  173. [ 0.723112] IOVMM: Created 0x3ffff000 B IOVMM from 0x10000000.
  174. [ 0.723164] rk_iommu ff930300.vopb_mmu: (vopb) Initialized
  175. [ 0.723727] rk_iommu ff940300.vopl_mmu: (vopl) Enter
  176. [ 0.724045] IOVMM: Created 0x3ffff000 B IOVMM from 0x10000000.
  177. [ 0.724099] rk_iommu ff940300.vopl_mmu: (vopl) Initialized
  178. [ 0.724668] rk_iommu ff9c0440.hevc_mmu: (hevc) Enter
  179. [ 0.725048] IOVMM: Created 0x3ffff000 B IOVMM from 0x10000000.
  180. [ 0.725101] rk_iommu ff9c0440.hevc_mmu: (hevc) Initialized
  181. [ 0.725666] rk_iommu ff9a0800.vpu_mmu: (vpu) Enter
  182. [ 0.725984] IOVMM: Created 0x3ffff000 B IOVMM from 0x10000000.
  183. [ 0.726036] rk_iommu ff9a0800.vpu_mmu: (vpu) Initialized
  184. [ 0.726608] rk_iommu ff914000.isp_mmu: (isp_mmu) Enter
  185. [ 0.726982] IOVMM: Created 0x3ffff000 B IOVMM from 0x10000000.
  186. [ 0.727034] rk_iommu ff914000.isp_mmu: (isp_mmu) Initialized
  187. [ 0.732749] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
  188. [ 0.732807] hw-breakpoint: maximum watchpoint size is 4 bytes.
  189. [ 0.733432] DDR DEBUG: version 1.00 20140603
  190. [ 0.733516] DDR DEBUG: Channel a:
  191. [ 0.733553] DDR DEBUG: DDR3 Device
  192. [ 0.733602] DDR DEBUG: Bus Width=32 Col=10 Bank=8 Row=15 CS=1 Total Capability=1024MB
  193. [ 0.733645] DDR DEBUG: Channel b:
  194. [ 0.733677] DDR DEBUG: DDR3 Device
  195. [ 0.733724] DDR DEBUG: Bus Width=32 Col=10 Bank=8 Row=15 CS=1 Total Capability=1024MB
  196. [ 0.733767] DDR DEBUG: addr=0xd64000
  197. [ 0.733806] DDR DEBUG: stride=9, size=256, halfcap=40000000
  198. [ 0.733847] DDR DEBUG: socAddr[0]=0xd64000, socAddr[1]=0xd64100
  199. [ 0.733887] DDR DEBUG: chAddr[0]=0xd64000, chAddr[1]=0xd64000
  200. [ 0.733933] DDR DEBUG: dtar[0]=0x401ac000, dtar[1]=0x401ac000
  201. [ 0.734092] DDR DEBUG: init success!!! freq=200MHz
  202. [ 0.734129] DDR DEBUG: Channel a:
  203. [ 0.734178] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=4,0, DGSL=1,0 extra clock, DGPS=180,270
  204. [ 0.734237] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=4,0, DGSL=1,0 extra clock, DGPS=180,270
  205. [ 0.734295] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=4,0, DGSL=1,0 extra clock, DGPS=180,270
  206. [ 0.734353] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=4,0, DGSL=1,0 extra clock, DGPS=180,270
  207. [ 0.734406] DDR DEBUG: ZERR=0, ZDONE=0, ZPD=0x0, ZPU=0x0, OPD=0x0, OPU=0x0
  208. [ 0.734449] DDR DEBUG: DRV Pull-Up=0x19, DRV Pull-Dwn=0x19
  209. [ 0.734488] DDR DEBUG: ODT Pull-Up=0x2, ODT Pull-Dwn=0x2
  210. [ 0.734522] DDR DEBUG: Channel b:
  211. [ 0.734569] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=4,0, DGSL=1,0 extra clock, DGPS=180,270
  212. [ 0.734626] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=4,0, DGSL=1,0 extra clock, DGPS=180,270
  213. [ 0.734684] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=4,0, DGSL=1,0 extra clock, DGPS=180,270
  214. [ 0.734741] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=4,0, DGSL=1,0 extra clock, DGPS=180,270
  215. [ 0.734793] DDR DEBUG: ZERR=0, ZDONE=0, ZPD=0x0, ZPU=0x0, OPD=0x0, OPU=0x0
  216. [ 0.734835] DDR DEBUG: DRV Pull-Up=0x19, DRV Pull-Dwn=0x19
  217. [ 0.734874] DDR DEBUG: ODT Pull-Up=0x2, ODT Pull-Dwn=0x2
  218. [ 0.810909] bio: create slab <bio-0> at 0
  219. [ 0.812794] Enter firefly_noatx8_init
  220. [ 0.813255] firefly_noatx8_probe 51
  221. [ 0.813991] SCSI subsystem initialized
  222. [ 0.814486] usbcore: registered new interface driver usbfs
  223. [ 0.814642] usbcore: registered new interface driver hub
  224. [ 0.814926] usbcore: registered new device driver usb
  225. [ 0.817926] rockchip_i2c ff650000.i2c: i2c-0: Rockchip I2C adapter
  226. [ 0.822353] rockchip_i2c ff140000.i2c: i2c-1: Rockchip I2C adapter
  227. [ 0.823857] rockchip_i2c ff660000.i2c: i2c-2: Rockchip I2C adapter
  228. [ 0.825335] rockchip_i2c ff150000.i2c: i2c-3: Rockchip I2C adapter
  229. [ 0.826152] rockchip_i2c ff160000.i2c: i2c-4: Rockchip I2C adapter
  230. [ 0.829004] media: Linux media interface: v0.10
  231. [ 0.829147] Linux video capture interface: v2.00
  232. [ 0.829304] pps_core: LinuxPPS API ver. 1 registered
  233. [ 0.829347] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
  234. [ 0.829428] PTP clock support registered
  235. [ 0.829870] rockchip_temp_probe,line=362
  236. [ 0.830698] tsadc ff280000.tsadc: initialized
  237. [ 0.831976] rockchip_ion_parse_dt: num_heaps = 1
  238. [ 0.832038] 0: 0 3 vmalloc 0x (null)
  239. [ 0.832790] Rockchip ion module is successfully loaded (v1.0)
  240. [ 0.833322] Advanced Linux Sound Architecture Driver Initialized.
  241. [ 0.834494] Bluetooth: Core ver 2.16
  242. [ 0.834663] NET: Registered protocol family 31
  243. [ 0.834708] Bluetooth: HCI device and connection manager initialized
  244. [ 0.834768] Bluetooth: HCI socket layer initialized
  245. [ 0.834821] Bluetooth: L2CAP socket layer initialized
  246. [ 0.834916] Bluetooth: SCO socket layer initialized
  247. [ 0.835604] cfg80211: Calling CRDA to update world regulatory domain
  248. [ 0.837959] act8846_i2c_probe,line=898
  249. [ 0.839349] act8846_parse_dt,line=746
  250. [ 0.840930] act8846_i2c_probe: act8846_pmic_hold=1
  251. [ 0.841001] act8846_i2c_probe: act8846_pmic_sleep=1
  252. [ 0.841058] act8846_i2c_probe: act8846_pmic_cpu_det_gpio=1
  253. [ 0.841116] act8846_i2c_probe: act8846_pmic_usb_hub_reset_gpio=1
  254. [ 0.843677] act_dcdc1: 1200 mV
  255. [ 0.847323] vccio: 3300 mV
  256. [ 0.849960] vdd_logic: 700 <--> 1500 mV at 1125 mV
  257. [ 0.853643] act_dcdc4: 2000 mV
  258. [ 0.855464] vccio_sd: 1800 <--> 3300 mV at 3300 mV
  259. [ 0.858285] act_ldo2: 1050 mV
  260. [ 0.861136] act_ldo3: 1800 mV
  261. [ 0.863979] act_ldo4: 3300 mV
  262. [ 0.866851] act_ldo5: 3300 mV
  263. [ 0.869848] act_ldo6: 1100 mV
  264. [ 0.872702] vcc_18: 1800 mV
  265. [ 0.875539] act_ldo8: 1850 mV
  266. [ 0.881947] vdd_arm: 712 <--> 1500 mV at 1012 mV
  267. [ 0.888231] vdd_gpu: 712 <--> 1500 mV at 900 mV
  268. [ 0.889217] rk808_i2c_probe,line=1368
  269. [ 0.890905] The device is not rk808 -11
  270. [ 0.891174] rk808: probe of 0-001b failed with error -11
  271. [ 0.895882] Switching to clocksource arch_sys_counter
  272. [ 0.962787] rk-fb rockchip-fb: rk fb ion client create success!
  273. [ 0.962858] rk-fb rockchip-fb: rockchip framebuffer driver probe
  274. [ 0.963955] rk-screen rk_screen.9: rockchip screen probe success
  275. [ 0.964747] rk32-lvds rk32-lvds: rk32 lvds driver probe success
  276. [ 0.965513] rk32-edp ff970000.edp: screen is not edp!
  277. [ 0.965588] rk32-edp: probe of ff970000.edp failed with error -22
  278. [ 0.966702] rk3288-lcdc lcdc0: can't find power_ctr node for lcdc0
  279. [ 0.967477] graphics fb0: rockchip framebuffer registerd:fb0
  280. [ 0.968534] graphics fb1: rockchip framebuffer registerd:fb1
  281. [ 0.969062] graphics fb2: rockchip framebuffer registerd:fb2
  282. [ 0.969599] graphics fb3: rockchip framebuffer registerd:fb3
  283. [ 0.970143] graphics fb4: rockchip framebuffer registerd:fb4
  284. [ 0.971798] rk_iommu ff930300.vopb_mmu: (vopb) Enabled
  285. [ 0.972226] rk3288-lcdc lcdc0: lcdc0: dclk:148500000>>fps:60
  286. [ 0.972298] rk3288-lcdc lcdc0: wakeup from standby!
  287. [ 1.106873] alloc_buffer:ion_phy_addr=0x10000000
  288. [ 1.150211] fb0:phy:10000000>>vir:f0191000>>len:0x1800000
  289. [ 1.278638] rk3288-lcdc lcdc0: lcdc0 probe ok, iommu enabled
  290. [ 1.279862] rockchip_set_mux:warning ignore bank num 15
  291. [ 1.280311] rockchip_set_mux:warning ignore bank num 15
  292. [ 1.280704] rockchip_set_mux:warning ignore bank num 15
  293. [ 1.281123] rockchip_set_mux:warning ignore bank num 15
  294. [ 1.281501] rockchip_set_mux:warning ignore bank num 15
  295. [ 1.281880] rockchip_set_mux:warning ignore bank num 15
  296. [ 1.282766] rockchip_set_mux:warning ignore bank num 15
  297. [ 1.283256] rockchip_set_mux:warning ignore bank num 15
  298. [ 1.284120] rockchip_set_mux:warning ignore bank num 15
  299. [ 1.284617] rockchip_set_mux:warning ignore bank num 15
  300. [ 1.285429] rockchip_set_mux:warning ignore bank num 15
  301. [ 1.285941] rockchip_set_mux:warning ignore bank num 15
  302. [ 1.286745] rockchip_set_mux:warning ignore bank num 15
  303. [ 1.287251] rockchip_set_mux:warning ignore bank num 15
  304. [ 1.291690] NET: Registered protocol family 2
  305. [ 1.293180] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
  306. [ 1.293668] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
  307. [ 1.294166] TCP: Hash tables configured (established 8192 bind 8192)
  308. [ 1.294320] TCP: reno registered
  309. [ 1.294376] UDP hash table entries: 512 (order: 2, 16384 bytes)
  310. [ 1.294505] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
  311. [ 1.295154] NET: Registered protocol family 1
  312. [ 1.295716] Unpacking initramfs...
  313. [ 1.519856] Freeing initrd memory: 1152K (c4bf0000 - c4d10000)
  314. [ 1.521972] hw perfevents: enabled with ARMv7 Cortex-A12 PMU driver, 7 counters available
  315. [ 1.523398] probe device ff9a0000.vpu_service
  316. [ 1.523844] vpu_service: power on
  317. [ 1.525045] checking hw id 4831
  318. [ 1.526163] vpu_service set to auto frequency mode
  319. [ 1.526381] vcodec vpu_service: vcodec ion client create success!
  320. [ 1.527489] rk_iommu ff9a0800.vpu_mmu: (vpu) Enabled
  321. [ 1.527595] rk_iommu ff9a0800.vpu_mmu: (vpu) Disabled
  322. [ 1.527648] rk_iommu ff9a0800.vpu_mmu: rockchip_iommu_detach_device: Detached IOMMU with pgtable 0x2e27f000
  323. [ 1.527695] vpu_service: power off...
  324. [ 1.527779] done
  325. [ 1.527810] init success
  326. [ 1.527971] probe device ff9c0000.hevc_service
  327. [ 1.528563] hevc_service: power on
  328. [ 1.529682] checking hw id 6867
  329. [ 1.530514] vcodec hevc_service: vcodec ion client create success!
  330. [ 1.531434] rk_iommu ff9c0440.hevc_mmu: (hevc) Enabled
  331. [ 1.531537] rk_iommu ff9c0440.hevc_mmu: (hevc) Disabled
  332. [ 1.531588] rk_iommu ff9c0440.hevc_mmu: rockchip_iommu_detach_device: Detached IOMMU with pgtable 0x2e27c000
  333. [ 1.531635] hevc_service: power off...
  334. [ 1.531722] done
  335. [ 1.531753] init success
  336. [ 1.532101] rknandbase v1.0 2014-03-31
  337. [ 1.532727] rknand_probe clk rate = 148500000
  338. [ 1.533103] rknand_driver:ret = 0
  339. [ 1.534200] audit: initializing netlink socket (disabled)
  340. [ 1.534313] type=2000 audit(1.010:1): initialized
  341. [ 1.536721] bounce pool size: 64 pages
  342. [ 1.552237] fuse init (API version 7.22)
  343. [ 1.553479] msgmni has been set to 1456
  344. [ 1.559548] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
  345. [ 1.559610] io scheduler noop registered
  346. [ 1.559650] io scheduler deadline registered
  347. [ 1.559979] io scheduler cfq registered (default)
  348. [ 1.562213] rga ff920000.rga: rga ion client create success!
  349. [ 1.562694] rga: Driver loaded succesfully
  350. [ 1.564096] IEP Power ON
  351. [ 1.564212] iep ion client create success!
  352. [ 1.565246] rk_iommu ff900800.iep_mmu: (iep) Enabled
  353. [ 1.565340] IEP Power OFF
  354. [ 1.565387] rk_iommu ff900800.iep_mmu: (iep) Disabled
  355. [ 1.565440] rk_iommu ff900800.iep_mmu: rockchip_iommu_detach_device: Detached IOMMU with pgtable 0x2e272000
  356. [ 1.565502] IEP Driver loaded succesfully
  357. [ 1.565790] Module initialized.
  358. [ 1.568207] dma-pl330 ffb20000.pdma: Loaded driver for PL330 DMAC-2364208
  359. [ 1.568279] dma-pl330 ffb20000.pdma: DBUFF-64x8bytes Num_Chans-5 Num_Peri-6 Num_Events-10
  360. [ 1.572622] dma-pl330 ff250000.pdma: Loaded driver for PL330 DMAC-2364208
  361. [ 1.572695] dma-pl330 ff250000.pdma: DBUFF-128x8bytes Num_Chans-8 Num_Peri-20 Num_Events-16
  362. [ 1.573442] pwm-voltage-regulator pwm_regulator.23: unable to request PWM, trying legacy API
  363. [ 1.573506] pwm-voltage-regulator pwm_regulator.23: unable to request legacy PWM
  364. [ 1.573549] pwm_regulator_probe:error
  365. [ 1.573622] platform pwm_regulator.23: Driver pwm-voltage-regulator requests probe deferral
  366. [ 1.574702] rk_serial.c v1.8 2014-03-04
  367. [ 1.575396] ff180000.serial: ttyS0 at MMIO 0xff180000 (irq = 87) is a rk29_serial.0
  368. [ 1.576052] serial ff180000.serial: membase 0xf0172000
  369. [ 1.585871] loop: module loaded
  370. [ 1.587646] SCSI Media Changer driver v0.25
  371. [ 1.588628] tun: Universal TUN/TAP device driver, 1.6
  372. [ 1.588678] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
  373. [ 1.590306] stmmac_probe_config_dt: Can not read property: pmu_regulator.
  374. [ 1.590362] stmmac_probe_config_dt: Can not read property: pmu_enable_level.
  375. [ 1.590409] stmmac_probe_config_dt: clock input or output? (input).
  376. [ 1.590454] stmmac_probe_config_dt: TX delay(0x30).
  377. [ 1.590494] stmmac_probe_config_dt: RX delay(0x10).
  378. [ 1.590617] stmmac_probe_config_dt: is rockchip,rk3288-gmac
  379. [ 1.590657] stmmc_pltfr_init:
  380. [ 1.590693] stmmc_pltfr_init: ERROR: Get power-gpio failed.
  381. [ 1.590768] stmmc_pltfr_init: ERROR: Request gmac phy reset pin failed.
  382. [ 1.590807] stmmc_pltfr_init: init for RGMII
  383. [ 1.590845] tx delay=0x30
  384. [ 1.590845] rx delay=0x10
  385. [ 1.592271] stmmac - user ID: 0x10, Synopsys ID: 0x35
  386. [ 1.592313] Normal descriptors
  387. [ 1.592344] Ring mode enabled
  388. [ 1.592378] DMA HW capability register supported
  389. [ 1.592417] RX Checksum Offload Engine supported (type 2)
  390. [ 1.592454] TX Checksum insertion supported
  391. [ 1.592487] Wake-Up On Lan supported
  392. [ 1.592603] Enable RX Mitigation via HW Watchdog Timer
  393. [ 1.593876] PPP generic driver version 2.4.2
  394. [ 1.594337] PPP BSD Compression module registered
  395. [ 1.594382] PPP Deflate Compression module registered
  396. [ 1.594445] PPP MPPE Compression module registered
  397. [ 1.594488] NET: Registered protocol family 24
  398. [ 1.594581] SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation enabled).
  399. [ 1.594629] CSLIP: code copyright 1989 Regents of the University of California.
  400. [ 1.594761] Rockchip WiFi SYS interface (V1.00) ...
  401. [ 1.595011] usbcore: registered new interface driver catc
  402. [ 1.595140] usbcore: registered new interface driver kaweth
  403. [ 1.595185] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver
  404. [ 1.595311] usbcore: registered new interface driver pegasus
  405. [ 1.595449] usbcore: registered new interface driver rtl8150
  406. [ 1.595587] usbcore: registered new interface driver r8152
  407. [ 1.595628] hso: drivers/net/usb/hso.c: Option Wireless
  408. [ 1.595830] usbcore: registered new interface driver hso
  409. [ 1.595978] usbcore: registered new interface driver asix
  410. [ 1.596102] usbcore: registered new interface driver ax88179_178a
  411. [ 1.596225] usbcore: registered new interface driver cdc_ether
  412. [ 1.596359] usbcore: registered new interface driver cdc_eem
  413. [ 1.596487] usbcore: registered new interface driver dm9601
  414. [ 1.596610] usbcore: registered new interface driver dm9620
  415. [ 1.596764] usbcore: registered new interface driver smsc75xx
  416. [ 1.596916] usbcore: registered new interface driver smsc95xx
  417. [ 1.597045] usbcore: registered new interface driver gl620a
  418. [ 1.597181] usbcore: registered new interface driver net1080
  419. [ 1.597309] usbcore: registered new interface driver plusb
  420. [ 1.597437] usbcore: registered new interface driver rndis_host
  421. [ 1.597562] usbcore: registered new interface driver cdc_subset
  422. [ 1.597682] usbcore: registered new interface driver zaurus
  423. [ 1.597813] usbcore: registered new interface driver MOSCHIP usb-ethernet driver
  424. [ 1.597990] usbcore: registered new interface driver int51x1
  425. [ 1.598120] usbcore: registered new interface driver kalmia
  426. [ 1.598259] usbcore: registered new interface driver ipheth
  427. [ 1.598402] usbcore: registered new interface driver sierra_net
  428. [ 1.598534] usbcore: registered new interface driver cx82310_eth
  429. [ 1.598692] usbcore: registered new interface driver cdc_ncm
  430. [ 1.598821] usbcore: registered new interface driver qmi_wwan
  431. [ 1.598948] usbcore: registered new interface driver cdc_mbim
  432. [ 1.598990] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  433. [ 1.602220] ehci_rk_probe f1a00000 f1a00010
  434. [ 1.602278] rockchip_ehci_host ff500000.usb: Rockchip On-Chip EHCI Host Controller
  435. [ 1.602377] rockchip_ehci_host ff500000.usb: new USB bus registered, assigned bus number 1
  436. [ 1.603451] rockchip_ehci_host ff500000.usb: irq 56, io mem 0xff500000
  437. [ 1.614445] rockchip_ehci_host ff500000.usb: USB 0.0 started, EHCI 1.00
  438. [ 1.614678] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  439. [ 1.614740] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  440. [ 1.614794] usb usb1: Product: Rockchip On-Chip EHCI Host Controller
  441. [ 1.614844] usb usb1: Manufacturer: Linux 3.10.0 ehci_hcd
  442. [ 1.614890] usb usb1: SerialNumber: ff500000.usb
  443. [ 1.616286] hub 1-0:1.0: USB hub found
  444. [ 1.616366] hub 1-0:1.0: 1 port detected
  445. [ 1.643936] ehci_rk_probe ok
  446. [ 1.644390] usbcore: registered new interface driver cdc_acm
  447. [ 1.644439] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
  448. [ 1.644626] usbcore: registered new interface driver usblp
  449. [ 1.644770] usbcore: registered new interface driver cdc_wdm
  450. [ 1.644972] usbcore: registered new interface driver usb-storage
  451. [ 1.645102] usbcore: registered new interface driver ums-alauda
  452. [ 1.645274] usbcore: registered new interface driver ums-cypress
  453. [ 1.645406] usbcore: registered new interface driver ums-datafab
  454. [ 1.645528] usbcore: registered new interface driver ums_eneub6250
  455. [ 1.645651] usbcore: registered new interface driver ums-freecom
  456. [ 1.645775] usbcore: registered new interface driver ums-isd200
  457. [ 1.645897] usbcore: registered new interface driver ums-jumpshot
  458. [ 1.646019] usbcore: registered new interface driver ums-karma
  459. [ 1.646139] usbcore: registered new interface driver ums-onetouch
  460. [ 1.646265] usbcore: registered new interface driver ums-sddr09
  461. [ 1.646389] usbcore: registered new interface driver ums-sddr55
  462. [ 1.646511] usbcore: registered new interface driver ums-usbat
  463. [ 1.646798] usbcore: registered new interface driver usbserial
  464. [ 1.646936] usbcore: registered new interface driver usbserial_generic
  465. [ 1.647049] usbserial: USB Serial support registered for generic
  466. [ 1.647182] usbcore: registered new interface driver option
  467. [ 1.647292] usbserial: USB Serial support registered for GSM modem (1-port)
  468. [ 1.647527] usbcore: registered new interface driver trancevibrator
  469. [ 1.647572] usb20_otg: version 3.10a 21-DEC-2012
  470. [ 1.648639] f1a80040
  471. [ 1.648690] Core Release: 3.10a
  472. [ 1.648744] Setting default values for core params
  473. [ 1.649171] Using Buffer DMA mode
  474. [ 1.649213] Periodic Transfer Interrupt Enhancement - disabled
  475. [ 1.649253] Multiprocessor Interrupt Enhancement - disabled
  476. [ 1.649294] OTG VER PARAM: 0, OTG VER FLAG: 0
  477. [ 1.649331] ^^^^^^^^^^^^^^^^^Device Mode
  478. [ 1.649387] Dedicated Tx FIFOs mode
  479. [ 1.649448] pcd_init otg_dev = ed942ec0
  480. [ 1.649963] usb20_otg ff580000.usb: DWC OTG Controller
  481. [ 1.650064] usb20_otg ff580000.usb: new USB bus registered, assigned bus number 2
  482. [ 1.650180] usb20_otg ff580000.usb: irq 55, io mem 0x00000000
  483. [ 1.650373] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
  484. [ 1.650434] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  485. [ 1.650486] usb usb2: Product: DWC OTG Controller
  486. [ 1.650533] usb usb2: Manufacturer: Linux 3.10.0 dwc_otg_hcd
  487. [ 1.650579] usb usb2: SerialNumber: ff580000.usb
  488. [ 1.651959] hub 2-0:1.0: USB hub found
  489. [ 1.652041] hub 2-0:1.0: 1 port detected
  490. [ 1.652983] usb20_host: version 3.10a 21-DEC-2012
  491. [ 1.656531] f1b00040
  492. [ 1.656580] Core Release: 3.10a
  493. [ 1.656632] Setting default values for core params
  494. [ 1.657063] Using Buffer DMA mode
  495. [ 1.657107] Periodic Transfer Interrupt Enhancement - disabled
  496. [ 1.657146] Multiprocessor Interrupt Enhancement - disabled
  497. [ 1.657188] OTG VER PARAM: 0, OTG VER FLAG: 0
  498. [ 1.657224] ^^^^^^^^^^^^^^^^^^Host Mode
  499. [ 1.657302] usb20_host ff540000.usb: DWC OTG Controller
  500. [ 1.657402] usb20_host ff540000.usb: new USB bus registered, assigned bus number 3
  501. [ 1.657509] usb20_host ff540000.usb: irq 57, io mem 0x00000000
  502. [ 1.657675] Init: Power Port (0)
  503. [ 1.657859] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
  504. [ 1.657919] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  505. [ 1.657970] usb usb3: Product: DWC OTG Controller
  506. [ 1.658016] usb usb3: Manufacturer: Linux 3.10.0 dwc_otg_hcd
  507. [ 1.658063] usb usb3: SerialNumber: ff540000.usb
  508. [ 1.659405] hub 3-0:1.0: USB hub found
  509. [ 1.659496] hub 3-0:1.0: 1 port detected
  510. [ 1.661144] .. rk pwm remotectl v1.0 init
  511. [ 1.661393] remotectl probe j=0x0
  512. [ 1.661934] input: ff680000.pwm as /devices/ff680000.pwm/input/input0
  513. [ 1.662508] pwm enable val=0x646205
  514. [ 1.663404] usbcore: registered new interface driver xpad
  515. [ 1.663630] usbcore: registered new interface driver usb_acecad
  516. [ 1.663788] usbcore: registered new interface driver aiptek
  517. [ 1.663934] usbcore: registered new interface driver gtco
  518. [ 1.664078] usbcore: registered new interface driver hanwang
  519. [ 1.664217] usbcore: registered new interface driver kbtab
  520. [ 1.664379] usbcore: registered new interface driver wacom
  521. [ 1.665436] sensor_register_slave:mma8452,id=17
  522. [ 1.665488] sensor_register_slave:cm3217,id=44
  523. [ 1.665530] sensor_register_slave:cm3218,id=45
  524. [ 1.671958] rtc_hym8563 0-0051: rtc core: registered hym8563 as rtc0
  525. [ 1.672126] i2c /dev entries driver
  526. [ 1.674409] IR NEC protocol handler initialized
  527. [ 1.674457] IR RC5(x) protocol handler initialized
  528. [ 1.674494] IR RC6 protocol handler initialized
  529. [ 1.674529] IR JVC protocol handler initialized
  530. [ 1.674564] IR Sony protocol handler initialized
  531. [ 1.674600] IR RC5 (streamzap) protocol handler initialized
  532. [ 1.674637] IR SANYO protocol handler initialized
  533. [ 1.674673] IR MCE Keyboard/mouse protocol handler initialized
  534. [ 1.674930] usbcore: registered new interface driver uvcvideo
  535. [ 1.674973] USB Video Class driver (1.1.1)
  536. [ 1.677593] device-mapper: uevent: version 1.0.3
  537. [ 1.678326] device-mapper: ioctl: 4.24.0-ioctl (2013-01-15) initialised: dm-devel@redhat.com
  538. [ 1.679301] Bluetooth: HCI UART driver ver 2.2
  539. [ 1.679357] Bluetooth: HCI H4 protocol initialized
  540. [ 1.679398] Bluetooth: HCILL protocol initialized
  541. [ 2.462124] cpufreq version 1.0, suspend freq 1200 MHz
  542. [ 2.462737] cpuidle: using governor ladder
  543. [ 2.462785] cpuidle: using governor menu
  544. [ 2.462905] Synopsys Designware Multimedia Card Interface Driver
  545. [ 2.463671] dwmmc_rockchip ff0f0000.rksdmmc: Version ID is 270a
  546. [ 2.464539] dwmmc_rockchip ff0f0000.rksdmmc: Using internal DMA controller.
  547. [ 2.465076] 3230..dw_mci_init_slot: fmin=400000, fmax=100000000 [mmc0]
  548. [ 2.465132] Line3235..dw_mci_init_slot: The rk_sdmmc Ver 1.12 2014-07-08
  549. [ 2.465594] 1357..dw_mci_set_ios: no card. [mmc0]
  550. [ 2.480403] 1357..dw_mci_set_ios: no card. [mmc0]
  551. [ 2.500000] rk_sdmmc: BOOT dw_mci_setup_bus: argue clk_mmc workaround out 800000Hz for init[mmc0]
  552. [ 2.500020] dwmmc_rockchip ff0f0000.rksdmmc: DW MMC controller at irq 67, 32 bit host data width, 256 deep fifo
  553. [ 2.500033] dwmmc_rockchip ff0f0000.rksdmmc: 1 slots initialized
  554. [ 2.500362] dwmmc_rockchip ff0c0000.rksdmmc: Version ID is 270a
  555. [ 2.501207] dwmmc_rockchip ff0c0000.rksdmmc: Using internal DMA controller.
  556. [ 2.501406] 3224..dw_mci_init_slot: fmin=300000, fmax=50000000 [mmc1]
  557. [ 2.501916] 1357..dw_mci_set_ios: no card. [mmc1]
  558. [ 2.519673] 1357..dw_mci_set_ios: no card. [mmc1]
  559. [ 2.532163] mmc0: BKOPS_EN bit is not set
  560. [ 2.534061] rk_sdmmc: BOOT Bus speed=0Hz,Bus width=8bits.[mmc0]
  561. [ 2.536361] mmc_host mmc0: Bus speed (slot 0) = 100000000Hz (slot req 100000000Hz, actual 100000000HZ div = 0)
  562. [ 2.536389] rk_sdmmc: BOOT dw_mci_setup_bus: argue clk_mmc workaround out normal clock [mmc0]
  563. [ 2.539494] dwmmc_rockchip ff0c0000.rksdmmc: DW MMC controller at irq 64, 32 bit host data width, 256 deep fifo
  564. [ 2.539513] dwmmc_rockchip ff0c0000.rksdmmc: 1 slots initialized
  565. [ 2.539861] dwmmc_rockchip ff0d0000.rksdmmc: Version ID is 270a
  566. [ 2.540080] dwmmc_rockchip ff0d0000.rksdmmc: Using internal DMA controller.
  567. [ 2.540234] 3230..dw_mci_init_slot: fmin=200000, fmax=50000000 [mmc2]
  568. [ 2.540353] 1357..dw_mci_set_ios: no card. [mmc2]
  569. [ 2.551409] rk_sdmmc: BOOT
  570. [ 2.551409] execute tuning: candidates_degree = SDMMC_SHIFT_DEGREE_0 SDMMC_SHIFT_DEGREE_90 SDMMC_SHIFT_DEGREE_INVALID SDMMC_SHIFT_DEGREE_INVALID[mmc0]
  571. [ 2.551512] mmc0: new HS200 MMC card at address 0001
  572. [ 2.551769] mmcblk0: mmc0:0001 AWMB3R 14.5 GiB
  573. [ 2.552095] uboot: 0x000400000 -- 0x000800000 (4 MB)
  574. [ 2.552108] misc: 0x000800000 -- 0x000c00000 (4 MB)
  575. [ 2.552118] resource: 0x000c00000 -- 0x001c00000 (16 MB)
  576. [ 2.552128] kernel: 0x001c00000 -- 0x002c00000 (16 MB)
  577. [ 2.552136] boot: 0x002c00000 -- 0x004c00000 (32 MB)
  578. [ 2.552145] recovery: 0x004c00000 -- 0x006c00000 (32 MB)
  579. [ 2.552155] backup: 0x006c00000 -- 0x00a000000 (52 MB)
  580. [ 2.552163] cache: 0x00a000000 -- 0x012000000 (128 MB)
  581. [ 2.552172] kpanic: 0x012000000 -- 0x012400000 (4 MB)
  582. [ 2.552181] system: 0x012400000 -- 0x042400000 (768 MB)
  583. [ 2.552189] metadata: 0x042400000 -- 0x042800000 (4 MB)
  584. [ 2.552198] userdata: 0x042800000 -- 0x082800000 (1024 MB)
  585. [ 2.552206] linuxroot: 0x082800000 -- 0x146800000 (3136 MB)
  586. [ 2.552215] user: 0x146800000 -- 0x3a3a00000 (9682 MB)
  587. [ 2.552240] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p141357..dw_mci_set_ios: no card. [mmc1]
  588. [ 2.558994] 1357..dw_mci_set_ios: no card. [mmc2]
  589. [ 2.578678] 1357..dw_mci_set_ios: no card. [mmc2]
  590. [ 2.578891] dwmmc_rockchip ff0d0000.rksdmmc: DW MMC controller at irq 65, 32 bit host data width, 256 deep fifo
  591. [ 2.578904] dwmmc_rockchip ff0d0000.rksdmmc: 1 slots initialized
  592. [ 2.579168] leds-gpio leds.31: pins are not configured from the driver
  593. [ 2.579383] hidraw: raw HID events driver (C) Jiri Kosina
  594. [ 2.580668] usbcore: registered new interface driver usbhid
  595. [ 2.580679] usbhid: USB HID core driver
  596. [ 2.580971] ashmem: initialized
  597. [ 2.581081] logger: created 256K log 'log_main'
  598. [ 2.581174] logger: created 256K log 'log_events'
  599. [ 2.581267] logger: created 256K log 'log_radio'
  600. [ 2.581365] logger: created 256K log 'log_system'
  601. [ 2.582331] input: rk29-keypad as /devices/ff100000.adc/key.34/input/input1
  602. [ 2.582912] rockchip-pinctrl ff770000.pinctrl: pin gpio6-8 already requested by workqueue; cannot claim for 2-0010
  603. [ 2.582928] rockchip-pinctrl ff770000.pinctrl: pin-200 (2-0010) status -22
  604. [ 2.582941] rockchip-pinctrl ff770000.pinctrl: could not request pin 200 on device rockchip-pinctrl
  605. [ 2.582952] ES8323 2-0010: Error applying setting, reverse things back
  606. [ 2.583238] es8323 probe i2c recv ok
  607. [ 2.583441] i2c-core: driver [ES8323] using legacy suspend method
  608. [ 2.583451] i2c-core: driver [ES8323] using legacy resume method
  609. [ 2.583748] rockchip-hdmi-spdif rockchip-hdmi-spdif.27: ASoC: CPU DAI (null) not registered
  610. [ 2.583778] rockchip_hdmi_spdif_audio_probe() register card failed:-517
  611. [ 2.583796] platform rockchip-hdmi-spdif.27: Driver rockchip-hdmi-spdif requests probe deferral
  612. [ 2.584036] es8323_probe
  613. [ 2.584121] es8323_probe:register ISR (irq=194)
  614. [ 3.218626] ES8323 2-0010: ASoC: no dapm match for LINPUT1 --> NULL --> Left Line Mux
  615. [ 3.218640] ES8323 2-0010: ASoC: Failed to add route LINPUT1 -> NULL -> Left Line Mux
  616. [ 3.218650] ES8323 2-0010: ASoC: no dapm match for LINPUT2 --> NULL --> Left Line Mux
  617. [ 3.218659] ES8323 2-0010: ASoC: Failed to add route LINPUT2 -> NULL -> Left Line Mux
  618. [ 3.218669] ES8323 2-0010: ASoC: no dapm match for Left PGA Mux --> NULL --> Left Line Mux
  619. [ 3.218677] ES8323 2-0010: ASoC: Failed to add route Left PGA Mux -> NULL -> Left Line Mux
  620. [ 3.218687] ES8323 2-0010: ASoC: no dapm match for RINPUT1 --> NULL --> Right Line Mux
  621. [ 3.218696] ES8323 2-0010: ASoC: Failed to add route RINPUT1 -> NULL -> Right Line Mux
  622. [ 3.218706] ES8323 2-0010: ASoC: no dapm match for RINPUT2 --> NULL --> Right Line Mux
  623. [ 3.218714] ES8323 2-0010: ASoC: Failed to add route RINPUT2 -> NULL -> Right Line Mux
  624. [ 3.218723] ES8323 2-0010: ASoC: no dapm match for Right PGA Mux --> NULL --> Right Line Mux
  625. [ 3.218732] ES8323 2-0010: ASoC: Failed to add route Right PGA Mux -> NULL -> Right Line Mux
  626. [ 3.218742] ES8323 2-0010: ASoC: no dapm match for LINPUT1 --> LAMP --> Left PGA Mux
  627. [ 3.218750] ES8323 2-0010: ASoC: Failed to add route LINPUT1 -> LAMP -> Left PGA Mux
  628. [ 3.218759] ES8323 2-0010: ASoC: no dapm match for LINPUT2 --> LAMP --> Left PGA Mux
  629. [ 3.218767] ES8323 2-0010: ASoC: Failed to add route LINPUT2 -> LAMP -> Left PGA Mux
  630. [ 3.218777] ES8323 2-0010: ASoC: no dapm match for Differential Mux --> LAMP --> Left PGA Mux
  631. [ 3.218785] ES8323 2-0010: ASoC: Failed to add route Differential Mux -> LAMP -> Left PGA Mux
  632. [ 3.218795] ES8323 2-0010: ASoC: no dapm match for RINPUT1 --> RAMP --> Right PGA Mux
  633. [ 3.218803] ES8323 2-0010: ASoC: Failed to add route RINPUT1 -> RAMP -> Right PGA Mux
  634. [ 3.218812] ES8323 2-0010: ASoC: no dapm match for RINPUT2 --> RAMP --> Right PGA Mux
  635. [ 3.218820] ES8323 2-0010: ASoC: Failed to add route RINPUT2 -> RAMP -> Right PGA Mux
  636. [ 3.218830] ES8323 2-0010: ASoC: no dapm match for Differential Mux --> RAMP --> Right PGA Mux
  637. [ 3.218838] ES8323 2-0010: ASoC: Failed to add route Differential Mux -> RAMP -> Right PGA Mux
  638. [ 3.218848] ES8323 2-0010: ASoC: no dapm match for LINPUT1 --> LAMP --> Differential Mux
  639. [ 3.218856] ES8323 2-0010: ASoC: Failed to add route LINPUT1 -> LAMP -> Differential Mux
  640. [ 3.218866] ES8323 2-0010: ASoC: no dapm match for RINPUT1 --> RAMP --> Differential Mux
  641. [ 3.218874] ES8323 2-0010: ASoC: Failed to add route RINPUT1 -> RAMP -> Differential Mux
  642. [ 3.218884] ES8323 2-0010: ASoC: no dapm match for LINPUT2 --> LAMP --> Differential Mux
  643. [ 3.218891] ES8323 2-0010: ASoC: Failed to add route LINPUT2 -> LAMP -> Differential Mux
  644. [ 3.218901] ES8323 2-0010: ASoC: no dapm match for RINPUT2 --> RAMP --> Differential Mux
  645. [ 3.218909] ES8323 2-0010: ASoC: Failed to add route RINPUT2 -> RAMP -> Differential Mux
  646. [ 3.218934] ES8323 2-0010: ASoC: no dapm match for LINPUT1 --> LAMP --> Left Line Mux
  647. [ 3.218942] ES8323 2-0010: ASoC: Failed to add route LINPUT1 -> LAMP -> Left Line Mux
  648. [ 3.218952] ES8323 2-0010: ASoC: no dapm match for LINPUT2 --> LAMP --> Left Line Mux
  649. [ 3.218960] ES8323 2-0010: ASoC: Failed to add route LINPUT2 -> LAMP -> Left Line Mux
  650. [ 3.218970] ES8323 2-0010: ASoC: no dapm match for Left PGA Mux --> LAMP --> Left Line Mux
  651. [ 3.218978] ES8323 2-0010: ASoC: Failed to add route Left PGA Mux -> LAMP -> Left Line Mux
  652. [ 3.218988] ES8323 2-0010: ASoC: no dapm match for RINPUT1 --> RAMP --> Right Line Mux
  653. [ 3.218996] ES8323 2-0010: ASoC: Failed to add route RINPUT1 -> RAMP -> Right Line Mux
  654. [ 3.219005] ES8323 2-0010: ASoC: no dapm match for RINPUT2 --> RAMP --> Right Line Mux
  655. [ 3.219013] ES8323 2-0010: ASoC: Failed to add route RINPUT2 -> RAMP -> Right Line Mux
  656. [ 3.219022] ES8323 2-0010: ASoC: no dapm match for Right PGA Mux --> RAMP --> Right Line Mux
  657. [ 3.219029] ES8323 2-0010: ASoC: Failed to add route Right PGA Mux -> RAMP -> Right Line Mux
  658. [ 3.219163] ES8323 2-0010: ASoC: mux Right Line Mux has no paths
  659. [ 3.219175] ES8323 2-0010: ASoC: mux Left Line Mux has no paths
  660. [ 3.219186] ES8323 2-0010: ASoC: mux Right PGA Mux has no paths
  661. [ 3.219195] ES8323 2-0010: ASoC: mux Left PGA Mux has no paths
  662. [ 3.219215] ES8323 2-0010: ASoC: mux Differential Mux has no paths
  663. [ 3.221786] Enter::rk29_es8323_init----123
  664. [ 3.225067] rockchip-es8323 rockchip-es8323.29: ES8323 HiFi <-> rockchip-i2s.0 mapping ok
  665. [ 3.227174] u32 classifier
  666. [ 3.227181] Actions configured
  667. [ 3.227194] Netfilter messages via NETLINK v0.30.
  668. [ 3.227245] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
  669. [ 3.227529] ctnetlink v0.93: registering with nfnetlink.
  670. [ 3.227593] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
  671. [ 3.227600] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
  672. [ 3.227818] xt_time: kernel timezone is -0000
  673. [ 3.227984] ip_tables: (C) 2000-2006 Netfilter Core Team
  674. [ 3.228124] arp_tables: (C) 2002 David S. Miller
  675. [ 3.228157] TCP: cubic registered
  676. [ 3.228163] Initializing XFRM netlink socket
  677. [ 3.228340] NET: Registered protocol family 10
  678. [ 3.228782] mip6: Mobile IPv6
  679. [ 3.228804] ip6_tables: (C) 2000-2006 Netfilter Core Team
  680. [ 3.228908] sit: IPv6 over IPv4 tunneling driver
  681. [ 3.229211] NET: Registered protocol family 17
  682. [ 3.229234] NET: Registered protocol family 15
  683. [ 3.229278] Bridge firewalling registered
  684. [ 3.229289] Ebtables v2.0 registered
  685. [ 3.229441] Bluetooth: RFCOMM TTY layer initialized
  686. [ 3.229462] Bluetooth: RFCOMM socket layer initialized
  687. [ 3.229469] Bluetooth: RFCOMM ver 1.11
  688. [ 3.229475] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
  689. [ 3.229481] Bluetooth: BNEP filters: protocol multicast
  690. [ 3.229494] Bluetooth: BNEP socket layer initialized
  691. [ 3.229502] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
  692. [ 3.229511] Bluetooth: HIDP socket layer initialized
  693. [ 3.229535] l2tp_core: L2TP core driver, V2.0
  694. [ 3.229546] l2tp_ppp: PPPoL2TP kernel driver, V2.0
  695. [ 3.229553] [WLAN_RFKILL]: Enter rfkill_wlan_init
  696. [ 3.229738] [WLAN_RFKILL]: Enter rfkill_wlan_probe
  697. [ 3.229747] wlan_platdata_parse_dt: wifi_chip_type = bcmwifi
  698. [ 3.229755] [WLAN_RFKILL]: wlan_platdata_parse_dt: enable wifi power control.
  699. [ 3.229763] [WLAN_RFKILL]: wlan_platdata_parse_dt: disable wifi io reference voltage control.
  700. [ 3.229772] [WLAN_RFKILL]: wlan_platdata_parse_dt: wifi power controled by gpio.
  701. [ 3.229791] [WLAN_RFKILL]: wlan_platdata_parse_dt: get property: WIFI,poweren_gpio = 156, flags = 0.
  702. [ 3.229810] [WLAN_RFKILL]: wlan_platdata_parse_dt: get property: WIFI,host_wake_irq = 158, flags = 0.
  703. [ 3.229817] [WLAN_RFKILL]: rfkill_wlan_probe: init gpio
  704. [ 3.229841] [WLAN_RFKILL]: rockchip_wifi_voltage_select: wifi & sdio reference voltage: 1.8V
  705. [ 3.229879] [WLAN_RFKILL]: Exit rfkill_wlan_probe
  706. [ 3.229923] [BT_RFKILL]: Enter rfkill_rk_init
  707. [ 3.230032] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: uart_rts_gpios = 147.
  708. [ 3.230047] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,power_gpio = 155.
  709. [ 3.230061] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,reset_gpio = 157.
  710. [ 3.230074] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,wake_gpio = 154.
  711. [ 3.230087] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,wake_host_irq = 159.
  712. [ 3.230128] [BT_RFKILL]: Request irq for bt wakeup host
  713. [ 3.230220] [BT_RFKILL]: ** disable irq
  714. [ 3.230293] [BT_RFKILL]: ap6335 device registered.
  715. [ 3.631527] dwc_otg_hcd_enable, enable host controller
  716. [ 3.764374] Using Buffer DMA mode
  717. [ 3.764381] Periodic Transfer Interrupt Enhancement - disabled
  718. [ 3.764388] Multiprocessor Interrupt Enhancement - disabled
  719. [ 3.764395] OTG VER PARAM: 0, OTG VER FLAG: 0
  720. [ 3.764401] ^^^^^^^^^^^^^^^^^^Host Mode
  721. [ 3.808734] Init: Power Port (0)
  722. [ 3.857868] ******** Show Sink Info ********
  723. [ 3.857877] Max tmds clk is 0
  724. [ 3.857882] Support video mode:
  725. [ 3.857887] 1920x1080p@60Hz
  726. [ 3.857891] 1280x720p@60Hz
  727. [ 3.857896] 720x480p@60Hz
  728. [ 3.857901] Support video color mode:
  729. [ 3.857905] RGB
  730. [ 3.857909] YCbCr422
  731. [ 3.857913] YCbCr444
  732. [ 3.857918] Support video color depth:
  733. [ 3.857922] 24bit
  734. [ 3.857927] Support audio type:
  735. [ 3.857931] LPCM
  736. [ 3.857936] Support max audio channel is 2
  737. [ 3.857941] Support audio sample rate:
  738. [ 3.857946] 32000
  739. [ 3.857950] 44100
  740. [ 3.857953] 48000
  741. [ 3.857957] Support audio word lenght:
  742. [ 3.857962] 16bit
  743. [ 3.857966] 20bit
  744. [ 3.857969] 24bit
  745. [ 3.857974]
  746. [ 3.857977] ******** Show Sink Info ********
  747. [ 3.857993]
  748. [ 3.857993] rk_fb_switch_screen lcdc_id 0 type 6 enable 1
  749. [ 3.858006] fb0 win id 1 state 1
  750. [ 3.858027] rk3288-lcdc lcdc0: lcdc0: dclk:148500000>>fps:60
  751. [ 3.858050] fb1 win id 0 state 0
  752. [ 3.858056] fb2 win id 2 state 0
  753. [ 3.858062] fb3 win id 3 state 0
  754. [ 3.858067] fb4 win id 4 state 0
  755. [ 3.858073]
  756. [ 3.858073] rk_fb_switch_screen lcdc_id 0 type 6 enable 1 done
  757. [ 3.858073]
  758. [ 3.858087] pixel clk is 148500000 tmds clk is 148500000
  759. [ 3.858126] rk3288-hdmi ff980000.hdmi: [hdmi_dev_config_video] sucess output HDMI.
  760. [ 4.015680] phy_int 0x3d i2cm_int 0x00 phy_i2cm_int 0x00 cec_int 0x00 aud_int 0x02
  761. [ 4.015691] phy_stat is 0xf3 phy_pol 0xf3 phy_int 0x02
  762. [ 4.015691]
  763. [ 4.015701] new phy pol is 0xfd cur pol is 0xf1
  764. [ 4.015701]
  765. [ 4.015710] audio int is 0x02
  766. [ 4.015718] rk3288-hdmi ff980000.hdmi: rk3288 hdmi probe sucess.
  767. [ 4.016112] VFP support v0.3: implementor 41 architecture 3 part 30 variant d rev 0
  768. [ 4.016130] rk3288_init_suspend
  769. [ 4.016138] rk3288_suspend_init enter
  770. [ 4.016289] rk3288_suspend_init: pm_ctrbits =40017
  771. [ 4.016340] gpio_get_dts_info suspend:8
  772. [ 4.016347] gpio_get_dts_info resume:8
  773. [ 4.016353] rockchip,pmic-suspend_gpios:1007c30 1007c40 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
  774. [ 4.016379] rockchip,pmic-resume_gpios:2007c32 2007c42 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
  775. [ 4.016503] clks_gating_suspend_init:clkgt info ok
  776. [ 4.016581] Registering SWP/SWPB emulation handler
  777. [ 4.016958] ddrfreq: verion 1.2 20140526
  778. [ 4.016969] ddrfreq: normal 456MHz video_1080p 0MHz video_4k 456MHz dualview 0MHz idle 0MHz suspend 200MHz reboot 456MHz
  779. [ 4.016978] ddrfreq: auto-freq=0
  780. [ 4.016983] ddrfreq: auto-freq-table[0] 240MHz
  781. [ 4.016989] ddrfreq: auto-freq-table[1] 324MHz
  782. [ 4.016995] ddrfreq: auto-freq-table[2] 456MHz
  783. [ 4.017000] ddrfreq: auto-freq-table[3] 528MHz
  784. [ 4.018584] act_ldo3: operation not allowed
  785. [ 4.018821] vga_edid_probe: turn on ldo3 done.
  786. [ 4.018846] act_ldo4: operation not allowed
  787. [ 4.019076] vga_edid_probe: turn on ldo done.
  788. [ 4.019098] act_ldo2: operation not allowed
  789. [ 4.019324] vga_edid_probe: turn on ldo2 done.
  790. [ 4.019355] act_ldo8: operation not allowed
  791. [ 4.019583] vga_edid_probe: turn on ldo done.
  792. [ 4.024621] unable to read EDID block.
  793. [ 4.059160] unable to read EDID block.
  794. [ 4.093698] unable to read EDID block.
  795. [ 4.093708] vga-ddc: read and parse edid failed errno:-5.
  796. [ 4.093714] vga_edid_probe: success. 10
  797. [ 4.093812] firefly_vga_get_enable 180, 0
  798. [ 4.093818] firefly_vga_get_status 186
  799. [ 4.093824] firefly_vga_set_enable 159 enable:0
  800. [ 4.093868] regulator-dummy: disabling
  801. [ 4.094129] rockchip-hdmi-spdif rockchip-hdmi-spdif.27: ASoC: CPU DAI (null) not registered
  802. [ 4.094153] rockchip_hdmi_spdif_audio_probe() register card failed:-517
  803. [ 4.094167] platform rockchip-hdmi-spdif.27: Driver rockchip-hdmi-spdif requests probe deferral
  804. [ 4.094245] pcd_pullup, is_on 0
  805. [ 4.094278] file system registered
  806. [ 4.094807] android_usb gadget: Mass Storage Function, version: 2009/09/11
  807. [ 4.094815] android_usb gadget: Number of LUNs=2
  808. [ 4.094822] lun0: LUN: removable file: (no medium)
  809. [ 4.094829] lun1: LUN: removable file: (no medium)
  810. [ 4.094944] android_usb gadget: android_usb ready
  811. [ 4.095013] sensor_init: Probe name sensors
  812. [ 4.095027] sensor-dev.c v1.4 add angle calculation support between two gsensors 2013-09-01
  813. [ 4.095549] rtc_hym8563 0-0051: setting system clock to 2011-01-01 12:01:14 UTC (1293883274)
  814. [ 4.100875] usbcore: registered new interface driver snd-usb-audio
  815. [ 4.100887] ALSA device list:
  816. [ 4.100892] #0: RK_ES8323
  817. [ 4.102372] Freeing unused kernel memory: 2364K (c0a71000 - c0cc0000)
  818. [ 4.102675] rockchip-hdmi-spdif rockchip-hdmi-spdif.27: rk-hdmi-spdif-hifi <-> rockchip-spdif mapping ok
  819. [ 4.106907] SELinux: Permission attach_queue in class tun_socket not defined in policy.
  820. [ 4.106919] SELinux: the above unknown classes and permissions will be denied
  821. [ 4.172756] Indeed it is in host mode hprt0 = 00021501
  822. [ 4.313510] type=1403 audit(1293883274.710:2): policy loaded auid=4294967295 ses=4294967295
  823. [ 4.313607] SELinux: Loaded policy from /sepolicy
  824. [ 4.315032] type=1404 audit(1293883274.710:3): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
  825. [ 4.349872] usb 3-1: new high-speed USB device number 2 using usb20_host
  826. [ 4.349944] Indeed it is in host mode hprt0 = 00001101
  827. [ 4.546875] usb 3-1: New USB device found, idVendor=1a40, idProduct=0101
  828. [ 4.546886] usb 3-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
  829. [ 4.546894] usb 3-1: Product: USB 2.0 Hub [MTT]
  830. [ 4.547240] hub 3-1:1.0: USB hub found
  831. [ 4.547293] hub 3-1:1.0: 4 ports detected
  832. [ 5.295500] init: init.rk30board.bootmode.emmc.rc: 8: invalid command '/devices/ff0f0000.rksdmmc/mmc_host/mmc'
  833. [ 5.295528] init: init.rk30board.bootmode.emmc.rc: 9: invalid command '/devices/ff0c0000.rksdmmc/mmc_host/mmc'
  834. [ 5.295540] init: init.rk30board.bootmode.emmc.rc: 10: invalid command '/devices/ff580000.usb'
  835. [ 5.295557] init: init.rk30board.bootmode.emmc.rc: 11: invalid command '/devices/ff580000.usb'
  836. [ 5.295567] init: init.rk30board.bootmode.emmc.rc: 12: invalid command '/devices/ff500000.usb'
  837. [ 5.295577] init: init.rk30board.bootmode.emmc.rc: 13: invalid command '/devices/ff500000.usb'
  838. [ 5.295586] init: init.rk30board.bootmode.emmc.rc: 14: invalid command '/devices/ff540000.usb'
  839. [ 5.295596] init: init.rk30board.bootmode.emmc.rc: 15: invalid command '/devices/ff540000.usb'
  840. [ 5.295888] init (1): /proc/1/oom_adj is deprecated, please use /proc/1/oom_score_adj instead.
  841. [ 5.356297] init: /dev/hw_random not found
  842. [ 5.356371] keychord: using input dev ff680000.pwm for fevent
  843. [ 5.356382] keychord: using input dev rk29-keypad for fevent
  844. [ 5.363005] fs_mgr: parse_link_device : path = NULL
  845. [ 5.363047] fs_mgr: parse_link_device : path = NULL
  846. [ 5.363071] fs_mgr: parse_link_device : path = NULL
  847. [ 5.363092] fs_mgr: parse_link_device : path = NULL
  848. [ 5.363113] fs_mgr: parse_link_device : path = NULL
  849. [ 5.363134] fs_mgr: parse_link_device : path = NULL
  850. [ 5.363154] fs_mgr: parse_link_device : path = NULL
  851. [ 5.363175] fs_mgr: parse_link_device : path = NULL
  852. [ 5.363244] fs_mgr: ---------------resize_fs blk_dev /dev/block/platform/ff0f0000.rksdmmc/by-name/system, type ext4fs_mgr: Running /sbin/resize2fs on /dev/block/platform/ff0f0000.rksdmmc/by-name/system
  853. [ 5.364277] resize2fs: resize2fs 1.41.14 (22-Dec-2010)resize2fs: The filesystem is already 196608 blocks long. Nothing to do!resize2fs:
  854. [ 5.370488] EXT4-fs (mmcblk0p10): mounted filesystem with ordered data mode. Opts: noauto_da_alloc
  855. [ 5.374067] EXT4-fs (mmcblk0p8): mounted filesystem with ordered data mode. Opts: noauto_da_alloc,discard
  856. [ 5.376425] EXT4-fs (mmcblk0p11): mounted filesystem with ordered data mode. Opts: noauto_da_alloc,discard
  857. [ 5.381046] EXT4-fs (mmcblk0p12): mounted filesystem with ordered data mode. Opts: noauto_da_alloc,discard
  858. [ 5.386331] drmboot: version magic '3.0.36+ SMP preempt mod_unload ARMv7 ' should be '3.10.0 SMP preempt mod_unload ARMv7 p2v8 '
  859. [ 5.391871] mali pd enabled
  860. [ 5.391886] clk enabled
  861. [ 5.391898] MALI_DVFS_STEP=4,div_dvfs=10
  862. [ 5.391906] mali_dvfs_infotbl[0].clock=198000,min_threshold=0,max_threshold=70
  863. [ 5.391916] mali_dvfs_infotbl[1].clock=297000,min_threshold=70,max_threshold=80
  864. [ 5.391925] mali_dvfs_infotbl[2].clock=417000,min_threshold=80,max_threshold=90
  865. [ 5.391933] mali_dvfs_infotbl[3].clock=480000,min_threshold=94,max_threshold=100
  866. [ 5.392032] turn on mali power
  867. [ 5.392057] mali ffa30000.gpu: GPU identified as 0x0750 r0p0 status 1
  868. [ 5.392489] mali ffa30000.gpu: Probed as mali0
  869. [ 5.394929] rk29_ipp: version magic '3.0.8+ SMP preempt mod_unload ARMv7 ' should be '3.10.0 SMP preempt mod_unload ARMv7 p2v8 '
  870. [ 5.407270] init: /dev/hw_random not found
  871. [ 5.415541] binder: 134:134 transaction failed 29189, size 0-0
  872. [ 5.415779] init: cannot find '/system/vendor/bin/pvrsrvctl', disabling 'pvrsrvctl'
  873. [ 5.418759] init: cannot find '/system/bin/rild3', disabling 'ril-daemon3'
  874. [ 5.420582] init: cannot find '/system/etc/install-recovery.sh', disabling 'flash_recovery'
  875. [ 5.422482] init: cannot find '/system/bin/chrome.sh', disabling 'chrome'
  876. [ 5.422894] init: cannot find '/system/bin/bplus_helper', disabling 'bplus_helper'
  877. [ 5.426965] init: property 'ro.serialno' doesn't exist while expanding '${ro.serialno}'
  878. [ 5.426983] init: cannot expand '${ro.serialno}' while writing to '/sys/class/android_usb/android0/iSerial'
  879. [ 5.427255] init: using deprecated syntax for specifying property 'ro.product.usbfactory', use ${name} instead
  880. [ 5.501154] iep dpi mode inactivity
  881. [ 5.579467] rk3288-lcdc lcdc0: lcdc0: dclk:148500000>>fps:60
  882. [ 5.605422] fs_mgr: parse_link_device : path = NULL
  883. [ 5.605453] fs_mgr: parse_link_device : path = NULL
  884. [ 5.605474] fs_mgr: parse_link_device : path = NULL
  885. [ 5.605494] fs_mgr: parse_link_device : path = NULL
  886. [ 5.605512] fs_mgr: parse_link_device : path = NULL
  887. [ 5.605532] fs_mgr: parse_link_device : path = NULL
  888. [ 5.605560] fs_mgr: parse_link_device : path = NULL
  889. [ 5.605579] fs_mgr: parse_link_device : path = NULL
  890. [ 5.649921] init: property 'sys.powerctl' doesn't exist while expanding '${sys.powerctl}'
  891. [ 5.649937] init: powerctl: cannot expand '${sys.powerctl}'
  892. [ 5.649951] init: property 'sys.sysctl.extra_free_kbytes' doesn't exist while expanding '${sys.sysctl.extra_free_kbytes}'
  893. [ 5.649961] init: cannot expand '${sys.sysctl.extra_free_kbytes}' while writing to '/proc/sys/vm/extra_free_kbytes'
  894. [ 5.650160] firefly_vga_get_enable 180, 0
  895. [ 5.650208] firefly_vga_get_status 186
  896. [ 5.650711] android_usb: already disabled
  897. [ 5.650729] firefly_vga_set_enable 159 enable:0
  898. [ 5.652554] read descriptors
  899. [ 5.652569] read strings
  900. [ 5.652597] pcd_pullup, is_on 1
  901. shell@rk3288:/ $ [ 6.103425] rk3288-lcdc lcdc0: blank mode:0
  902. [ 6.392740] init: sys_prop: permission denied uid:1003 name:sys.gmali.version
  903. [ 6.622354] init: sys_prop: permission denied uid:1000 name:sys_graphic.cam_hal.ver
  904. [ 6.622509] init: sys_prop: permission denied uid:1000 name:sys_graphic.cam_trace
  905. [ 6.622612] init: sys_prop: permission denied uid:1000 name:sys_graphic.cam_camboard.ver
  906. [ 6.622722] init: sys_prop: permission denied uid:1000 name:sys_graphic.cam_libisp.ver
  907. [ 6.622820] init: sys_prop: permission denied uid:1000 name:sys_graphic.cam_isi.ver
  908. [ 6.786355] Enter::rk29_hw_params----50
  909. [ 6.787348] Enter:rk29_hw_params, 84, rate=44100
  910. [ 6.787363] Enter:rk29_hw_params, 92, LRCK=64
  911. [ 7.099366] Enter::rk29_hw_params----50
  912. [ 7.100369] Enter:rk29_hw_params, 84, rate=44100
  913. [ 7.100383] Enter:rk29_hw_params, 92, LRCK=64
  914. [ 10.470906] es8323_mic_state_ctrl read: 0
  915. [ 10.470926] mic_state_switch 0
  916. [ 10.470935] hp_det = 0,insert hp
  917. [ 10.470942] hp mic use intern
  918. [ 14.611173] warning: `zygote' uses 32-bit capabilities (legacy support in use)
  919. [ 16.331905] lowmemorykiller: lowmem_shrink: convert oom_adj to oom_score_adj:
  920. [ 16.331929] lowmemorykiller: oom_adj 0 => oom_score_adj 0
  921. [ 16.331939] lowmemorykiller: oom_adj 1 => oom_score_adj 58
  922. [ 16.331947] lowmemorykiller: oom_adj 2 => oom_score_adj 117
  923. [ 16.331955] lowmemorykiller: oom_adj 3 => oom_score_adj 176
  924. [ 16.331963] lowmemorykiller: oom_adj 9 => oom_score_adj 529
  925. [ 16.331970] lowmemorykiller: oom_adj 15 => oom_score_adj 1000
  926. [ 16.488355] phy_power_on: enable = 1
  927. [ 16.522844] Read the Ethernet MAC address from IDB:00:00:00:00:00:00
  928. [ 16.522891] eth0: device MAC address **:**:**:**:**:**
  929. [ 16.527029] libphy: stmmac: probed
  930. [ 16.527042] eth0: PHY ID 001cc915 at 0 IRQ 0 (stmmac-0:00) active
  931. [ 16.527052] eth0: PHY ID 001cc915 at 1 IRQ 0 (stmmac-0:01) active
  932. [ 16.672366] wifi_driver_write: wifi driver already rmmod
  933. [ 16.849166] acc_open
  934. [ 16.849202] acc_release
  935. [ 18.285313] FAT-fs (mmcblk0p14): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
  936. [ 18.301618] init: no such service 'fuse_internal_sd'
  937. [ 18.649317] init: sys_prop: permission denied uid:1001 name:media.cfg.audio.soundeffect
  938. [ 19.375245] init: sys_prop: permission denied uid:10007 name:sys.gmali.version
  939. [ 19.534764] init: sys_prop: permission denied uid:1003 name:service.bootanim.exit
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!