Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- Linux version 2.6.18-274.12.1.el5 (mockbuild@builder10.centos.org) (gcc version 4.1.2 20080704 (Red Hat 4.1.2-51)) #1 SMP Tue Nov 29 13:37:46 EST 2011
- Command line: ro root=/dev/VolGroup00/LogVol00 selinux=0
- BIOS-provided physical RAM map:
- BIOS-e820: 0000000000010000 - 000000000009f800 (usable)
- BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
- BIOS-e820: 00000000000e8000 - 0000000000100000 (reserved)
- BIOS-e820: 0000000000100000 - 00000000cf7b1d00 (usable)
- BIOS-e820: 00000000cf7b1d00 - 00000000cf7b3d00 (ACPI NVS)
- BIOS-e820: 00000000cf7b3d00 - 00000000d0000000 (reserved)
- BIOS-e820: 00000000f4000000 - 00000000f8000000 (reserved)
- BIOS-e820: 00000000fec00000 - 00000000fed40000 (reserved)
- BIOS-e820: 00000000fed45000 - 0000000100000000 (reserved)
- BIOS-e820: 0000000100000000 - 000000022c000000 (usable)
- DMI 2.4 present.
- DMI: Hewlett-Packard HP Compaq dx7300 Microtower/0A50h, BIOS 786E1 v01.05 08/30/2006
- ACPI: RSDP (v000 COMPAQ ) @ 0x00000000000e7610
- ACPI: RSDT (v001 HPQOEM SLIC-BPC 0x20060830 0x00000000) @ 0x00000000cf7c3d40
- ACPI: FADT (v001 COMPAQ BROADH2O 0x00000001 0x00000000) @ 0x00000000cf7c3de8
- ACPI: MADT (v001 COMPAQ BROADH2O 0x00000001 0x00000000) @ 0x00000000cf7c3e5c
- ACPI: ASF! (v032 COMPAQ BROADH2O 0x00000001 0x00000000) @ 0x00000000cf7c3ec4
- ACPI: MCFG (v001 COMPAQ BROADH2O 0x00000001 0x00000000) @ 0x00000000cf7c3f27
- ACPI: TCPA (v001 COMPAQ BROADH2O 0x00000001 0x00000000) @ 0x00000000cf7c3f63
- ACPI: DSDT (v001 COMPAQ DSDT_PRJ 0x00000001 MSFT 0x0100000e) @ 0x0000000000000000
- No NUMA configuration found
- Faking a node at 0000000000000000-000000022c000000
- Bootmem setup node 0 0000000000000000-000000022c000000
- bootmap start 20000 pages 70
- Memory for crash kernel (0x0 to 0x0) notwithin permissible range
- disabling kdump
- Setting up node 0 0-22c000
- On node 0 totalpages: 2045877
- DMA zone: 2412 pages, LIFO batch:0
- DMA32 zone: 831465 pages, LIFO batch:31
- Normal zone: 1212000 pages, LIFO batch:31
- ACPI: PM-Timer IO Port: 0xf808
- ACPI: Local APIC address 0xfee00000
- ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
- Processor #0 15:6 APIC version 20
- ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
- Processor #1 15:6 APIC version 20
- ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
- ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
- ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
- IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
- ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
- ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
- ACPI: IRQ0 used by override.
- ACPI: IRQ2 used by override.
- ACPI: IRQ9 used by override.
- Setting APIC routing to physical flat
- Using ACPI (MADT) for SMP configuration information
- Nosave address range: 000000000009f000 - 00000000000a0000
- Nosave address range: 00000000000a0000 - 00000000000e8000
- Nosave address range: 00000000000e8000 - 0000000000100000
- Nosave address range: 00000000cf7b1000 - 00000000cf7b2000
- Nosave address range: 00000000cf7b2000 - 00000000cf7b3000
- Nosave address range: 00000000cf7b3000 - 00000000cf7b4000
- Nosave address range: 00000000cf7b4000 - 00000000d0000000
- Nosave address range: 00000000d0000000 - 00000000f4000000
- Nosave address range: 00000000f4000000 - 00000000f8000000
- Nosave address range: 00000000f8000000 - 00000000fec00000
- Nosave address range: 00000000fec00000 - 00000000fed40000
- Nosave address range: 00000000fed40000 - 00000000fed45000
- Nosave address range: 00000000fed45000 - 0000000100000000
- Allocating PCI resources starting at d4000000 (gap: d0000000:24000000)
- SMP: Allowing 2 CPUs, 0 hotplug CPUs
- Built 1 zonelists. Total pages: 2045877
- Kernel command line: ro root=/dev/VolGroup00/LogVol00 selinux=0
- Initializing CPU#0
- PID hash table entries: 4096 (order: 12, 32768 bytes)
- Console: colour VGA+ 80x25
- Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
- Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
- Checking aperture...
- ACPI: DMAR not present
- PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
- Placing software IO TLB between 0x1c2b000 - 0x5c2b000
- Memory: 8100552k/9109504k available (2606k kernel code, 213560k reserved, 1662k data, 224k init)
- Calibrating delay loop (skipped), value calculated using timer frequency.. 5981.03 BogoMIPS (lpj=2990518)
- Security Framework v1.0.0 initialized
- SELinux: Disabled at boot.
- Capability LSM initialized
- Mount-cache hash table entries: 256
- CPU: Trace cache: 12K uops, L1 D cache: 16K
- CPU: L2 cache: 2048K
- using mwait in idle threads.
- CPU: Physical Processor ID: 0
- CPU: Processor Core ID: 0
- CPU0: Thermal monitoring enabled (TM1)
- SMP alternatives: switching to UP code
- ACPI: Core revision 20060707
- Using local APIC timer interrupts.
- Detected 12.460 MHz APIC timer.
- SMP alternatives: switching to SMP code
- Booting processor 1/2 APIC 0x1
- Initializing CPU#1
- Calibrating delay using timer specific routine.. 5979.90 BogoMIPS (lpj=2989954)
- CPU: Trace cache: 12K uops, L1 D cache: 16K
- CPU: L2 cache: 2048K
- CPU: Physical Processor ID: 0
- CPU: Processor Core ID: 1
- CPU1: Thermal monitoring enabled (TM1)
- Intel(R) Pentium(R) D CPU 3.00GHz stepping 05
- Brought up 2 CPUs
- CPU#0: NMI watchdog performance counter calibration - 117->137
- CPU#1: NMI watchdog performance counter calibration - 60->80
- NMI watchdog testing PASSED.
- time.c: Using 3.579545 MHz WALL PM GTOD PIT/TSC timer.
- time.c: Detected 2990.518 MHz processor.
- sizeof(vma)=176 bytes
- sizeof(page)=56 bytes
- sizeof(inode)=560 bytes
- sizeof(dentry)=216 bytes
- sizeof(ext3inode)=760 bytes
- sizeof(buffer_head)=96 bytes
- sizeof(skbuff)=248 bytes
- migration_cost=617
- checking if image is initramfs... it is
- Freeing initrd memory: 3392k freed
- NET: Registered protocol family 16
- ACPI: bus type pci registered
- Warning: pci_mmcfg_init marking 256MB space uncacheable.
- MCFG table requires 64MB uncacheable only. Try booting with acpi_mcfg_max_pci_bus_num=on
- PCI: Using MMCONFIG at f4000000
- ACPI: Interpreter enabled
- ACPI: Using IOAPIC for interrupt routing
- ACPI: No dock devices found.
- ACPI: PCI Root Bridge [PCI0] (0000:00)
- PCI quirk: region f800-f87f claimed by ICH6 ACPI/GPIO/TCO
- PCI quirk: region fa00-fa3f claimed by ICH6 GPIO
- PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.2
- PCI: Transparent bridge - 0000:00:1e.0
- ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
- ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 10 11 14 15)
- ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
- ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 14 15)
- ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 11 14 15)
- ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 10 11 14 15)
- ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *10 11 14 15)
- ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *10 11 14 15)
- ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
- ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCX1._PRT]
- ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB_._PRT]
- Linux Plug and Play Support v0.97 (c) Adam Belay
- pnp: PnP ACPI init
- pnp: PnP ACPI: found 15 devices
- usbcore: registered new driver usbfs
- usbcore: registered new driver hub
- PCI: Using ACPI for IRQ routing
- PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
- NetLabel: Initializing
- NetLabel: domain hash size = 128
- NetLabel: protocols = UNLABELED CIPSOv4
- NetLabel: unlabeled traffic allowed by default
- ACPI: DMAR not present
- PCI-GART: No AMD northbridge found.
- pnp: 00:0c: ioport range 0x400-0x41f has been reserved
- pnp: 00:0c: ioport range 0x420-0x43f has been reserved
- pnp: 00:0c: ioport range 0x440-0x45f has been reserved
- pnp: 00:0c: ioport range 0x460-0x47f could not be reserved
- pnp: 00:0c: ioport range 0x480-0x48f has been reserved
- pnp: 00:0c: ioport range 0xf800-0xf81f could not be reserved
- pnp: 00:0c: ioport range 0xf820-0xf83f could not be reserved
- pnp: 00:0c: ioport range 0xf840-0xf85f has been reserved
- pnp: 00:0d: ioport range 0x4d0-0x4d1 has been reserved
- pnp: 00:0d: ioport range 0xcb0-0xcbf has been reserved
- pnp: 00:0e: iomem range 0x0-0x9ffff could not be reserved
- pnp: 00:0e: iomem range 0x100000-0xcfffffff could not be reserved
- pnp: 00:0e: iomem range 0xe4000-0xfffff could not be reserved
- pnp: 00:0e: iomem range 0xfec01000-0xfecfffff could not be reserved
- PCI: Bridge: 0000:00:1c.0
- IO window: disabled.
- MEM window: disabled.
- PREFETCH window: disabled.
- PCI: Bridge: 0000:00:1e.0
- IO window: 1000-1fff
- MEM window: f0600000-f08fffff
- PREFETCH window 0x00000000d4000000-0x00000000d40fffff
- PCI: Setting latency timer of device 0000:00:1c.0 to 64
- PCI: Setting latency timer of device 0000:00:1e.0 to 64
- NET: Registered protocol family 2
- IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
- TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
- TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
- TCP: Hash tables configured (established 262144 bind 65536)
- TCP reno registered
- audit: initializing netlink socket (disabled)
- type=2000 audit(1325474891.483:1): initialized
- Total HugeTLB memory allocated, 0
- VFS: Disk quotas dquot_6.5.1
- Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
- Initializing Cryptographic API
- alg: No test for crc32c (crc32c-generic)
- ksign: Installing public key data
- Loading keyring
- - Added public key 1908C980DFCDBD44
- - User ID: CentOS (Kernel Module GPG key)
- io scheduler noop registered
- io scheduler anticipatory registered
- io scheduler deadline registered
- io scheduler cfq registered (default)
- Boot video device is 0000:00:02.0
- PCI: Setting latency timer of device 0000:00:1c.0 to 64
- pci_hotplug: PCI Hot Plug PCI Core version: 0.5
- ACPI (exconfig-0456): Dynamic SSDT Load - OemId [COMPAQ] OemTableId [ CPU_TM2] [20060707]
- ACPI: Processor [CPU0] (supports 8 throttling states)
- ACPI: Processor [CPU1] (supports 8 throttling states)
- Real Time Clock Driver v1.12ac
- Non-volatile memory driver v1.2
- Linux agpgart interface v0.101 (c) Dave Jones
- agpgart: Detected an Intel 965Q Chipset.
- agpgart: Detected 7676K stolen memory.
- agpgart: AGP aperture is 256M @ 0xe0000000
- Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
- serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
- 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
- brd: module loaded
- Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
- ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
- Probing IDE interface ide0...
- hda: HL-DT-STDVD+-RW GSA-H31L, ATAPI CD/DVD-ROM drive
- Probing IDE interface ide1...
- hdc: WDC WD3200AAKS-00UU3A0, ATA DISK drive
- ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
- ide1 at 0x170-0x177,0x376 on irq 15
- hdc: max request size: 512KiB
- hdc: 625142448 sectors (320072 MB) w/16384KiB Cache, CHS=38913/255/63
- hdc: cache flushes supported
- hdc: hdc1 hdc2
- ide-floppy driver 0.99.newide
- usbcore: registered new driver hiddev
- usbcore: registered new driver usbhid
- drivers/usb/input/hid-core.c: v2.6:USB HID core driver
- PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at 0x60,0x64 irq 1,12
- serio: i8042 KBD port at 0x60,0x64 irq 1
- serio: i8042 AUX port at 0x60,0x64 irq 12
- mice: PS/2 mouse device common for all mice
- md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
- md: bitmap version 4.39
- TCP bic registered
- Initializing IPsec netlink socket
- NET: Registered protocol family 1
- NET: Registered protocol family 17
- ACPI: (supports S0 S3 S4 S5)
- Initalizing network drop monitor service
- Freeing unused kernel memory: 224k freed
- Write protecting the kernel read-only data: 527k
- GSI 16 sharing vector 0xB9 and IRQ 16
- ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 22 (level, low) -> IRQ 185
- PCI: Setting latency timer of device 0000:00:1a.7 to 64
- ehci_hcd 0000:00:1a.7: EHCI Host Controller
- ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
- ehci_hcd 0000:00:1a.7: debug port 1
- PCI: cache line size of 128 is not supported by device 0000:00:1a.7
- ehci_hcd 0000:00:1a.7: irq 185, io mem 0xf0525000
- ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
- usb usb1: configuration #1 chosen from 1 choice
- hub 1-0:1.0: USB hub found
- hub 1-0:1.0: 4 ports detected
- GSI 17 sharing vector 0xC1 and IRQ 17
- ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 20 (level, low) -> IRQ 193
- PCI: Setting latency timer of device 0000:00:1d.7 to 64
- ehci_hcd 0000:00:1d.7: EHCI Host Controller
- ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
- ehci_hcd 0000:00:1d.7: debug port 1
- PCI: cache line size of 128 is not supported by device 0000:00:1d.7
- ehci_hcd 0000:00:1d.7: irq 193, io mem 0xf0525400
- ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
- usb usb2: configuration #1 chosen from 1 choice
- hub 2-0:1.0: USB hub found
- hub 2-0:1.0: 4 ports detected
- ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
- USB Universal Host Controller Interface driver v3.0
- ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 20 (level, low) -> IRQ 193
- PCI: Setting latency timer of device 0000:00:1a.0 to 64
- uhci_hcd 0000:00:1a.0: UHCI Host Controller
- uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
- uhci_hcd 0000:00:1a.0: irq 193, io base 0x00002020
- usb usb3: configuration #1 chosen from 1 choice
- hub 3-0:1.0: USB hub found
- hub 3-0:1.0: 2 ports detected
- GSI 18 sharing vector 0xC9 and IRQ 18
- ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 201
- PCI: Setting latency timer of device 0000:00:1a.1 to 64
- uhci_hcd 0000:00:1a.1: UHCI Host Controller
- uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
- uhci_hcd 0000:00:1a.1: irq 201, io base 0x00002040
- usb usb4: configuration #1 chosen from 1 choice
- hub 4-0:1.0: USB hub found
- hub 4-0:1.0: 2 ports detected
- ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 20 (level, low) -> IRQ 193
- PCI: Setting latency timer of device 0000:00:1d.0 to 64
- uhci_hcd 0000:00:1d.0: UHCI Host Controller
- uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
- uhci_hcd 0000:00:1d.0: irq 193, io base 0x00002060
- usb usb5: configuration #1 chosen from 1 choice
- hub 5-0:1.0: USB hub found
- hub 5-0:1.0: 2 ports detected
- ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 21 (level, low) -> IRQ 201
- PCI: Setting latency timer of device 0000:00:1d.1 to 64
- uhci_hcd 0000:00:1d.1: UHCI Host Controller
- uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
- uhci_hcd 0000:00:1d.1: irq 201, io base 0x00002080
- usb usb6: configuration #1 chosen from 1 choice
- hub 6-0:1.0: USB hub found
- hub 6-0:1.0: 2 ports detected
- usb 4-1: new full speed USB device using uhci_hcd and address 2
- SCSI subsystem initialized
- libata version 3.00 loaded.
- sata_sil 0000:07:04.0: version 2.3
- ACPI: PCI Interrupt 0000:07:04.0[A] -> GSI 20 (level, low) -> IRQ 193
- scsi0 : sata_sil
- scsi1 : sata_sil
- scsi2 : sata_sil
- scsi3 : sata_sil
- ata1: SATA max UDMA/100 mmio m1024@0xf0800000 tf 0xf0800080 irq 193
- ata2: SATA max UDMA/100 mmio m1024@0xf0800000 tf 0xf08000c0 irq 193
- ata3: SATA max UDMA/100 mmio m1024@0xf0800000 tf 0xf0800280 irq 193
- ata4: SATA max UDMA/100 mmio m1024@0xf0800000 tf 0xf08002c0 irq 193
- usb 4-1: configuration #1 chosen from 1 choice
- input: Logitech USB Receiver as /class/input/input0
- input: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:1a.1-1
- input: Logitech USB Receiver as /class/input/input1
- input,hiddev96: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1a.1-1
- ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
- ata1.00: ATA-8: Hitachi HDP725050GLA360, GM4OA5KA, max UDMA/100
- ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
- ata1.00: configured for UDMA/100
- usb 3-1: new low speed USB device using uhci_hcd and address 3
- ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
- ata2.00: ATA-8: Hitachi HDP725050GLA360, GM4OA5KA, max UDMA/100
- ata2.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
- ata2.00: configured for UDMA/100
- usb 3-1: configuration #1 chosen from 1 choice
- hiddev97: USB HID v1.00 Device [Cypress Semiconductor USB to Serial] on usb-0000:00:1a.0-1
- ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
- ata3.00: ATA-8: Hitachi HDP725050GLA360, GM4OA5KA, max UDMA/100
- ata3.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
- ata3.00: configured for UDMA/100
- ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
- ata4.00: ATA-8: Hitachi HDP725050GLA360, GM4OA5KA, max UDMA/100
- ata4.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
- ata4.00: configured for UDMA/100
- Vendor: ATA Model: Hitachi HDP72505 Rev: GM4O
- Type: Direct-Access ANSI SCSI revision: 05
- SCSI device sda: 976773168 512-byte hdwr sectors (500108 MB)
- sda: Write Protect is off
- sda: Mode Sense: 00 3a 00 00
- SCSI device sda: drive cache: write back
- SCSI device sda: 976773168 512-byte hdwr sectors (500108 MB)
- sda: Write Protect is off
- sda: Mode Sense: 00 3a 00 00
- SCSI device sda: drive cache: write back
- sda: sda1
- sd 0:0:0:0: Attached scsi disk sda
- Vendor: ATA Model: Hitachi HDP72505 Rev: GM4O
- Type: Direct-Access ANSI SCSI revision: 05
- SCSI device sdb: 976773168 512-byte hdwr sectors (500108 MB)
- sdb: Write Protect is off
- sdb: Mode Sense: 00 3a 00 00
- SCSI device sdb: drive cache: write back
- SCSI device sdb: 976773168 512-byte hdwr sectors (500108 MB)
- sdb: Write Protect is off
- sdb: Mode Sense: 00 3a 00 00
- SCSI device sdb: drive cache: write back
- sdb: sdb1
- sd 1:0:0:0: Attached scsi disk sdb
- Vendor: ATA Model: Hitachi HDP72505 Rev: GM4O
- Type: Direct-Access ANSI SCSI revision: 05
- SCSI device sdc: 976773168 512-byte hdwr sectors (500108 MB)
- sdc: Write Protect is off
- sdc: Mode Sense: 00 3a 00 00
- SCSI device sdc: drive cache: write back
- SCSI device sdc: 976773168 512-byte hdwr sectors (500108 MB)
- sdc: Write Protect is off
- sdc: Mode Sense: 00 3a 00 00
- SCSI device sdc: drive cache: write back
- sdc: sdc1
- sd 2:0:0:0: Attached scsi disk sdc
- Vendor: ATA Model: Hitachi HDP72505 Rev: GM4O
- Type: Direct-Access ANSI SCSI revision: 05
- SCSI device sdd: 976773168 512-byte hdwr sectors (500108 MB)
- sdd: Write Protect is off
- sdd: Mode Sense: 00 3a 00 00
- SCSI device sdd: drive cache: write back
- SCSI device sdd: 976773168 512-byte hdwr sectors (500108 MB)
- sdd: Write Protect is off
- sdd: Mode Sense: 00 3a 00 00
- SCSI device sdd: drive cache: write back
- sdd: sdd1
- sd 3:0:0:0: Attached scsi disk sdd
- ata_piix 0000:00:1f.2: version 2.12
- GSI 19 sharing vector 0xD1 and IRQ 19
- ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 18 (level, low) -> IRQ 209
- ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
- ata_piix 0000:00:1f.2: 0x1F0 IDE port busy
- ata_piix 0000:00:1f.2: 0x170 IDE port busy
- ata_piix 0000:00:1f.2: no available legacy port
- device-mapper: uevent: version 1.0.3
- device-mapper: ioctl: 4.11.6-ioctl (2011-02-18) initialised: dm-devel@redhat.com
- device-mapper: dm-raid45: initialized v0.2594l
- kjournald starting. Commit interval 5 seconds
- EXT3-fs: mounted filesystem with ordered data mode.
- input: PC Speaker as /class/input/input2
- 802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
- All bugs added by David S. Miller <davem@redhat.com>
- shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
- hda: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache
- Uniform CD-ROM driver Revision: 3.20
- sd 0:0:0:0: Attached scsi generic sg0 type 0
- sd 1:0:0:0: Attached scsi generic sg1 type 0
- sd 2:0:0:0: Attached scsi generic sg2 type 0
- sd 3:0:0:0: Attached scsi generic sg3 type 0
- parport: PnPBIOS parport detected.
- parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
- e1000e: Intel(R) PRO/1000 Network Driver - 1.9.5-NAPI
- e1000e: Copyright(c) 1999 - 2011 Intel Corporation.
- GSI 20 sharing vector 0xD9 and IRQ 20
- ACPI: PCI Interrupt 0000:00:19.0[B] -> GSI 19 (level, low) -> IRQ 217
- PCI: Setting latency timer of device 0000:00:19.0 to 64
- e1000e 0000:00:19.0: Using NUMA node 0 for memory allocations
- e1000e 0000:00:19.0: eth0: (PCI Express:2.5GT/s:Width x1) 00:0f:fe:59:fd:ef
- e1000e 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection
- e1000e 0000:00:19.0: eth0: MAC: 7, PHY: 6, PBA No: 1002FF-0FF
- ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 21 (level, low) -> IRQ 201
- PCI: Setting latency timer of device 0000:00:1b.0 to 64
- hda_codec: ALC262: SKU not ready 0x411111f0
- FDC 0 is a post-1991 82077
- lp0: using parport0 (interrupt-driven).
- lp0: console ready
- ACPI: Power Button (FF) [PWRF]
- ACPI: Power Button (CM) [PBTN]
- ACPI: Mapper loaded
- dell-wmi: No known WMI GUID found
- ACPI Exception (video-1450): AE_NOT_FOUND, Evaluating _DOD [20060707]
- input: Video Bus as /class/input/input3
- ACPI: Video Device [GFX0] (multi-head: no rom: yes post: no)
- md: Autodetecting RAID arrays.
- md: autorun ...
- md: considering sdd1 ...
- md: adding sdd1 ...
- md: adding sda1 ...
- md: created md0
- md: bind<sda1>
- md: bind<sdd1>
- md: running: <sdd1><sda1>
- md: raid1 personality registered for level 1
- raid1: raid set md0 active with 2 out of 2 mirrors
- md: ... autorun DONE.
- md: md1 stopped.
- md: bind<sdc1>
- md: bind<sdb1>
- raid1: raid set md1 active with 2 out of 2 mirrors
- device-mapper: multipath: version 1.0.6 loaded
- EXT3 FS on dm-0, internal journal
- kjournald starting. Commit interval 5 seconds
- EXT3 FS on hdc1, internal journal
- EXT3-fs: mounted filesystem with ordered data mode.
- kjournald starting. Commit interval 5 seconds
- EXT3 FS on md0, internal journal
- EXT3-fs: mounted filesystem with ordered data mode.
- kjournald starting. Commit interval 5 seconds
- EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
- EXT3 FS on md1, internal journal
- EXT3-fs: mounted filesystem with ordered data mode.
- Adding 5111800k swap on /dev/VolGroup00/LogVol01. Priority:-1 extents:1 across:5111800k
- Loading iSCSI transport class v2.0-871.
- libcxgbi:libcxgbi_init_module: tag itt 0x1fff, 13 bits, age 0xf, 4 bits.
- libcxgbi:ddp_setup_host_page_size: system PAGE 4096, ddp idx 0.
- Chelsio T3 iSCSI Driver cxgb3i v2.0.0 (Jun. 2010)
- iscsi: registered transport (cxgb3i)
- NET: Registered protocol family 10
- lo: Disabled Privacy Extensions
- IPv6 over IPv4 tunneling driver
- cnic: Broadcom NetXtreme II CNIC Driver cnic v2.2.13 (Jan 31, 2011)
- Broadcom NetXtreme II iSCSI Driver bnx2i v2.6.2.3 (Dec 31, 2010)
- iscsi: registered transport (bnx2i)
- iscsi: registered transport (tcp)
- iscsi: registered transport (iser)
- iscsi: registered transport (be2iscsi)
- ip_tables: (C) 2000-2006 Netfilter Core Team
- Netfilter messages via NETLINK v0.30.
- ip_conntrack version 2.4 (8192 buckets, 65536 max) - 304 bytes per conntrack
- ADDRCONF(NETDEV_UP): eth0: link is not ready
- e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx
- e1000e 0000:00:19.0: eth0: 10/100 speed: disabling TSO
- ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
- smsc47b397: found SMSC SCH5317 (base address 0x0480, revision 2)
- eth0: no IPv6 routers present
- nut-scanner[15367]: segfault at 0000000000000090 rip 00002b91658aaa38 rsp 00007fff0a16cb50 error 4
- usb 3-1: usbfs: process 16445 (blazer_usb) did not claim interface 0 before use
- usb 3-1: USB disconnect, address 3
- usb 3-1: new low speed USB device using uhci_hcd and address 4
- usb 3-1: configuration #1 chosen from 1 choice
- hiddev97: USB HID v1.00 Device [Cypress Semiconductor USB to Serial] on usb-0000:00:1a.0-1
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement