Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- @#
- BCM74130011
- 012
- K1
- K2
- K3
- K4
- K5
- Shmoo Version=3.5
- %00000001%
- RC1=00000005
- WC1=FFFFFFEA
- RC2=00000019
- WC2=0000003C
- RC3=0000000F
- WC3=FFFFFFEA
- RC4=0000000F
- WC4=000000019
- WC60013
- BL=00000000
- RC1=00000004
- RC2=00000017
- BL=00000001
- RC1=00000004
- RC2
- BL=00000003
- RC1=00000006
- RC2=00000018
- BL=00000004
- RC1=00000005
- RC2=000000006
- RC1=00000005
- RC2=00000017
- BL=00000007
- RC1=00000002
- RC2=00000016
- SoooooooooR
- DRAM scramble OK
- 3
- COPY CODE
- A567
- BCM97413B1 CFE v2.21.2679, CFE core v2.12, Endian Mode: Little
- Build Date: ight (C) Beijing Yuxing Software Co., Ltd.
- DDR Freq: 396MHz
- CPU speed: 405MHz
- Memory Config: 64-bit UMA
- Device h: 256MB
- CFE initialized.
- Starting ...
- Loading: ........... 131072 by001024
- Board name: YX6936U
- MAC address: xx:xx:xx:xx:xx:xx
- Loading: .............. 109610 bytes read
- Entry address is 0x870a24c8
- Jpeg info: width=720 height=576
- bootindex=0, kernel=1, root=1
- *********RSA verif here! ***********
- kernel veriartation_name =flash0.kernel1:,the offset =1619906,the len =192
- partation_name ........... 1620098 bytes read
- Entry address is 0xa80j:192
- the same
- vbuf =0x7f,0x57,0xbb,
- msg_len=1619906,sig_len=192,Saltlen =-1
- OFFSET
- get rsa info ,the partation_name =flash0.root1:,the offset =24276992,theLoading: ........... 24277184 bytes read
- Entry address is 0xa8000000
- ??=??=??=??
- 192
- j:192
- the same
- vbuf =0x73,0x80,0xb6,
- msg_len=24276992,sig_len=192,Saltlen =-1001000/3347512 0x80334000/441732 0x8039fd84/176784 Entry address is 0x80377000
- TP1 Entry Address at 0x80000ffc =.1-yx5915 (YX6936U-3.5.3433 by duanxijian@localhost.localdomain) (gcc version 4.CST 2010
- Fetching vars from bootloader... OK (e,D,b,C)
- Detected 512 MB on MEMC55
- g_board_RAM_size=512MB
- Options: sata=1 enet=1 emac_1=1 no_mdio=0 docsis=0 e01
- Primary instruction cache 32kB, physically tagged, 2-way, linesize 64 bytes.TLB refill handler (23 instructions).
- <6>Synthesized TLB load handler fastpath structions).
- <6>Synthesized TLB modify handler fastpath (36 instructions).
- Dety: 10000000 @ 20000000 (usable)
- User-defined physical RAM map:
- node [00000000,00: RAM]
- <5>Reserving 176alpages: 65536
- <7> DMA zone: 65536 pages, LIFO batch:15
- <7>Onal zone: 65536 pages, LIFO batch:15
- Built 2 zonelists. Totsh0.kernel1 runlevel=1 eth-mac-addr=?x?,?x?,?x??,?x??,?x?,?x?? mem=80M brcmrac=0
- init started: BusyBox v1.11.1 (2009-03-23 17:36:41 CST)
- starting pid 1, tty 'Mount /proc fs
- Mount /sys fs
- Restore RW directories
- mount -nt tmpfs -o size=4Mount /dev/pts
- Mount /proc/bus/usb
- Start syslog daemon
- dhcpcd -Hd -L /var/run eth0
- start services
- start user local.rc
- Disk found
- /root/yx_config_user.ini exists
- /root/yx_config_out.ini exists
- /root/yx_config_ntp.ini exists
- /root/vmdrm existes
- /root/.Iptv_List.inf exists
- Fri Dec 4 13
- runlevel = 1
- =================DEBUG LEVEL=================
- ENABLE_ERROR_PRINT:1
- ENABLE_WA==================================
- [back_up.c:126]Message:product_id is YX6936U[utility.c:255]Warning:open file /root/.yxapi.conf error!
- [utility.c:255]Warning:open file /root/.start fetchtv local.rc
- 42852
- file /mnt/usb1/PVR/.MediaIndexFILE is OK!
- :::set interrupt to 0
- :::set interrupt to 0
- (null) options: a=2 v=2 e=0.100 E=5.000 P=30.000
- d=3 c=2 x=0 op=1 l= f= poo server pool.ntp.org (0.0.0.0)
- (null): receive timed out after 1 seconds
- read_packet: Resource temporarily unavailable
- (null): receive timed out after 1 seconds
- (null): too many bad or lost packets
- (null): no acceptab=3 c=2 x=0 op=1 l= f= pool.ntp.org
- (null): reserved IP numbers cannot be used
- (null): receive timed out after 1 seconds
- read_packet: Resource temporarily unavailable
- (null): receive timed out after 1 seconds
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement