Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- [ 0.000000] Initializing cgroup subsys cpuset
- [ 0.000000] Initializing cgroup subsys cpu
- [ 0.000000] Initializing cgroup subsys cpuacct
- [ 0.000000] Linux version 3.11-2-486 (debian-kernel@lists.debian.org) (gcc version 4.8.1 (Debian 4.8.1-10) ) #1 Debian 3.11.8-1 (2013-11-13)
- [ 0.000000] e820: BIOS-provided physical RAM map:
- [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
- [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
- [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000007ffeffff] usable
- [ 0.000000] BIOS-e820: [mem 0x000000007fff0000-0x000000007fffffff] ACPI data
- [ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
- [ 0.000000] Notice: NX (Execute Disable) protection missing in CPU!
- [ 0.000000] SMBIOS 2.5 present.
- [ 0.000000] DMI: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006
- [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
- [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
- [ 0.000000] e820: last_pfn = 0x7fff0 max_arch_pfn = 0x100000
- [ 0.000000] MTRR default type: uncachable
- [ 0.000000] MTRR variable ranges disabled:
- [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
- [ 0.000000] CPU MTRRs all blank - virtualized system.
- [ 0.000000] found SMP MP-table at [mem 0x0009fff0-0x0009ffff] mapped at [c009fff0]
- [ 0.000000] initial memory mapped: [mem 0x00000000-0x01bfffff]
- [ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
- [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
- [ 0.000000] [mem 0x00000000-0x000fffff] page 4k
- [ 0.000000] init_memory_mapping: [mem 0x37000000-0x373fffff]
- [ 0.000000] [mem 0x37000000-0x373fffff] page 2M
- [ 0.000000] init_memory_mapping: [mem 0x30000000-0x36ffffff]
- [ 0.000000] [mem 0x30000000-0x36ffffff] page 2M
- [ 0.000000] init_memory_mapping: [mem 0x00100000-0x2fffffff]
- [ 0.000000] [mem 0x00100000-0x003fffff] page 4k
- [ 0.000000] [mem 0x00400000-0x2fffffff] page 2M
- [ 0.000000] init_memory_mapping: [mem 0x37400000-0x377fdfff]
- [ 0.000000] [mem 0x37400000-0x377fdfff] page 4k
- [ 0.000000] BRK [0x01635000, 0x01635fff] PGTABLE
- [ 0.000000] RAMDISK: [mem 0x35562000-0x36aa8fff]
- [ 0.000000] ACPI: RSDP 000e0000 00024 (v02 VBOX )
- [ 0.000000] ACPI: XSDT 7fff0040 0004C (v01 VBOX VBOXXSDT 00000001 ASL 00000061)
- [ 0.000000] ACPI: FACP 7fff0110 000F4 (v04 VBOX VBOXFACP 00000001 ASL 00000061)
- [ 0.000000] ACPI: DSDT 7fff0530 01B96 (v01 VBOX VBOXBIOS 00000002 INTL 20090123)
- [ 0.000000] ACPI: FACS 7fff0240 00040
- [ 0.000000] ACPI: APIC 7fff0280 00054 (v02 VBOX VBOXAPIC 00000001 ASL 00000061)
- [ 0.000000] ACPI: HPET 7fff02e0 00038 (v01 VBOX VBOXHPET 00000001 ASL 00000061)
- [ 0.000000] ACPI: MCFG 7fff0320 0003C (v01 VBOX VBOXMCFG 00000001 ASL 00000061)
- [ 0.000000] ACPI: SSDT 7fff0360 001CC (v01 VBOX VBOXCPUT 00000002 INTL 20090123)
- [ 0.000000] ACPI: Local APIC address 0xfee00000
- [ 0.000000] 1159MB HIGHMEM available.
- [ 0.000000] 887MB LOWMEM available.
- [ 0.000000] mapped low ram: 0 - 377fe000
- [ 0.000000] low ram: 0 - 377fe000
- [ 0.000000] BRK [0x01636000, 0x01636fff] PGTABLE
- [ 0.000000] Zone ranges:
- [ 0.000000] DMA [mem 0x00001000-0x00ffffff]
- [ 0.000000] Normal [mem 0x01000000-0x377fdfff]
- [ 0.000000] HighMem [mem 0x377fe000-0x7ffeffff]
- [ 0.000000] Movable zone start for each node
- [ 0.000000] Early memory node ranges
- [ 0.000000] node 0: [mem 0x00001000-0x0009efff]
- [ 0.000000] node 0: [mem 0x00100000-0x7ffeffff]
- [ 0.000000] On node 0 totalpages: 524174
- [ 0.000000] free_area_init_node: node 0, pgdat c151a300, node_mem_map f4562020
- [ 0.000000] DMA zone: 32 pages used for memmap
- [ 0.000000] DMA zone: 0 pages reserved
- [ 0.000000] DMA zone: 3998 pages, LIFO batch:0
- [ 0.000000] Normal zone: 1744 pages used for memmap
- [ 0.000000] Normal zone: 223230 pages, LIFO batch:31
- [ 0.000000] HighMem zone: 2320 pages used for memmap
- [ 0.000000] HighMem zone: 296946 pages, LIFO batch:31
- [ 0.000000] Using APIC driver default
- [ 0.000000] ACPI: PM-Timer IO Port: 0x4008
- [ 0.000000] ACPI: Local APIC address 0xfee00000
- [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
- [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
- [ 0.000000] IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-23
- [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
- [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
- [ 0.000000] ACPI: IRQ0 used by override.
- [ 0.000000] ACPI: IRQ2 used by override.
- [ 0.000000] ACPI: IRQ9 used by override.
- [ 0.000000] Using ACPI (MADT) for SMP configuration information
- [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
- [ 0.000000] nr_irqs_gsi: 40
- [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
- [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
- [ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
- [ 0.000000] e820: [mem 0x80000000-0xfffbffff] available for PCI devices
- [ 0.000000] Booting paravirtualized kernel on bare hardware
- [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
- [ 0.000000] pcpu-alloc: [0] 0
- [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 522398
- [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.11-2-486 root=UUID=7522aca0-83b3-450e-9b93-3714a6d69743 ro
- [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
- [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
- [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
- [ 0.000000] Initializing CPU#0
- [ 0.000000] Initializing HighMem for node 0 (000377fe:0007fff0)
- [ 0.000000] Memory: 2051220K/2096696K available (3712K kernel code, 349K rwdata, 1188K rodata, 536K init, 528K bss, 45476K reserved, 1187784K highmem)
- [ 0.000000] virtual kernel memory layout:
- [ 0.000000] fixmap : 0xfffa1000 - 0xfffff000 ( 376 kB)
- [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
- [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
- [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
- [ 0.000000] .init : 0xc1523000 - 0xc15a9000 ( 536 kB)
- [ 0.000000] .data : 0xc13a0678 - 0xc15226c0 (1544 kB)
- [ 0.000000] .text : 0xc1000000 - 0xc13a0678 (3713 kB)
- [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
- [ 0.000000] NR_IRQS:2304 nr_irqs:256 16
- [ 0.000000] CPU 0 irqstacks, hard=f7008000 soft=f700a000
- [ 0.000000] Console: colour VGA+ 80x25
- [ 0.000000] console [tty0] enabled
- [ 0.000000] hpet clockevent registered
- [ 0.000000] tsc: Fast TSC calibration failed
- [ 0.000000] tsc: Unable to calibrate against PIT
- [ 0.000000] tsc: using HPET reference calibration
- [ 0.000000] tsc: Detected 2394.481 MHz processor
- [ 0.028222] Calibrating delay loop (skipped), value calculated using timer frequency.. 4788.96 BogoMIPS (lpj=9577924)
- [ 0.028732] pid_max: default: 32768 minimum: 301
- [ 0.030596] Security Framework initialized
- [ 0.031060] AppArmor: AppArmor disabled by boot time parameter
- [ 0.031196] Yama: disabled by default; enable with sysctl kernel.yama.*
- [ 0.032270] Mount-cache hash table entries: 512
- [ 0.037861] Initializing cgroup subsys memory
- [ 0.038278] Initializing cgroup subsys devices
- [ 0.038427] Initializing cgroup subsys freezer
- [ 0.038576] Initializing cgroup subsys net_cls
- [ 0.038721] Initializing cgroup subsys blkio
- [ 0.038847] Initializing cgroup subsys perf_event
- [ 0.040150] Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0
- [ 0.040150] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
- [ 0.040150] tlb_flushall_shift: 5
- [ 0.040416] CPU: Intel(R) Pentium(R) CPU B980 @ 2.40GHz (fam: 06, model: 2a, stepping: 07)
- [ 0.204000] ACPI: Core revision 20130517
- [ 0.223980] ACPI: All ACPI Tables successfully acquired
- [ 0.256524] Performance Events: unsupported p6 CPU model 42 no PMU driver, software events only.
- [ 0.277232] Enabling APIC mode: Flat. Using 1 I/O APICs
- [ 0.285588] NMI watchdog: disabled (cpu0): hardware events not enabled
- [ 0.296000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
- [ 0.340000] APIC calibration not consistent with PM-Timer: 96ms instead of 100ms
- [ 0.340000] APIC delta adjusted to PM-Timer: 6250020 (6048423)
- [ 0.340358] devtmpfs: initialized
- [ 0.347678] NET: Registered protocol family 16
- [ 0.349552] EISA bus registered
- [ 0.350307] ACPI: bus type PCI registered
- [ 0.350749] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
- [ 0.353955] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xdc000000-0xdfffffff] (base 0xdc000000)
- [ 0.354738] PCI: not using MMCONFIG
- [ 0.357788] PCI: PCI BIOS revision 2.10 entry at 0xfda26, last bus=0
- [ 0.358520] PCI: Using configuration type 1 for base access
- [ 0.369527] bio: create slab <bio-0> at 0
- [ 0.370586] ACPI: Added _OSI(Module Device)
- [ 0.370938] ACPI: Added _OSI(Processor Device)
- [ 0.371283] ACPI: Added _OSI(3.0 _SCP Extensions)
- [ 0.371640] ACPI: Added _OSI(Processor Aggregator Device)
- [ 0.378910] ACPI: EC: Look up EC in DSDT
- [ 0.379379] ACPI: Executed 1 blocks of module-level executable AML code
- [ 0.385782] ACPI: Interpreter enabled
- [ 0.386149] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130517/hwxface-571)
- [ 0.387026] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130517/hwxface-571)
- [ 0.387895] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20130517/hwxface-571)
- [ 0.388632] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S4_] (20130517/hwxface-571)
- [ 0.389571] ACPI: (supports S0 S5)
- [ 0.389905] ACPI: Using IOAPIC for interrupt routing
- [ 0.390535] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xdc000000-0xdfffffff] (base 0xdc000000)
- [ 0.391316] PCI: MMCONFIG at [mem 0xdc000000-0xdfffffff] reserved in ACPI motherboard resources
- [ 0.391848] PCI: Using MMCONFIG for extended config space
- [ 0.392053] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
- [ 0.392732] ACPI: No dock devices found.
- [ 0.398217] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
- [ 0.398716] acpi PNP0A03:00: ACPI _OSC support notification failed, disabling PCIe ASPM
- [ 0.399234] acpi PNP0A03:00: Unable to request _OSC control (_OSC support mask: 0x08)
- [ 0.403350] acpi PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored)
- [ 0.403689] acpi PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored)
- [ 0.403858] acpi PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
- [ 0.404546] acpi PNP0A03:00: host bridge window [mem 0x80000000-0xffdfffff] (ignored)
- [ 0.404781] PCI: root bus 00: using default resources
- [ 0.404998] acpi PNP0A03:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
- [ 0.406167] PCI host bridge to bus 0000:00
- [ 0.406707] pci_bus 0000:00: root bus resource [bus 00-ff]
- [ 0.407258] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
- [ 0.407788] pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffff]
- [ 0.410513] pci 0000:00:02.0: [80ee:beef] type 00 class 0x030000
- [ 0.416271] pci 0000:00:02.0: reg 0x10: [mem 0xe0000000-0xe7ffffff pref]
- [ 0.450284] pci 0000:00:03.0: [8086:100e] type 00 class 0x020000
- [ 0.453261] pci 0000:00:03.0: reg 0x10: [mem 0xf0000000-0xf001ffff]
- [ 0.456664] pci 0000:00:03.0: reg 0x18: [io 0xd000-0xd007]
- [ 0.464286] pci 0000:00:04.0: [80ee:cafe] type 00 class 0x088000
- [ 0.464930] pci 0000:00:04.0: reg 0x10: [io 0xd020-0xd03f]
- [ 0.466543] pci 0000:00:04.0: reg 0x14: [mem 0xf0400000-0xf07fffff]
- [ 0.468279] pci 0000:00:04.0: reg 0x18: [mem 0xf0800000-0xf0803fff pref]
- [ 0.473236] pci 0000:00:05.0: [8086:2415] type 00 class 0x040100
- [ 0.473618] pci 0000:00:05.0: reg 0x10: [io 0xd100-0xd1ff]
- [ 0.473931] pci 0000:00:05.0: reg 0x14: [io 0xd200-0xd23f]
- [ 0.474895] pci 0000:00:07.0: [8086:7113] type 00 class 0x068000
- [ 0.476813] pci 0000:00:18.0: [8086:2448] type 01 class 0x060401
- [ 0.477496] pci 0000:00:19.0: [8086:2448] type 01 class 0x060401
- [ 0.478152] pci 0000:00:1f.0: [8086:27b9] type 00 class 0x060100
- [ 0.478948] pci 0000:00:1f.0: quirk: [io 0x8000-0x807f] claimed by ICH6 ACPI/GPIO/TCO
- [ 0.480081] pci 0000:00:1f.1: [8086:269e] type 00 class 0x01018a
- [ 0.480759] pci 0000:00:1f.1: reg 0x20: [io 0xe000-0xe00f]
- [ 0.481437] pci 0000:00:1f.2: [8086:2829] type 00 class 0x010601
- [ 0.483018] pci 0000:00:1f.2: reg 0x10: [io 0xe010-0xe017]
- [ 0.484306] pci 0000:00:1f.2: reg 0x14: [io 0xe018-0xe01b]
- [ 0.485014] pci 0000:00:1f.2: reg 0x18: [io 0xe020-0xe027]
- [ 0.486902] pci 0000:00:1f.2: reg 0x1c: [io 0xe028-0xe02b]
- [ 0.488673] pci 0000:00:1f.2: reg 0x20: [io 0xe030-0xe03f]
- [ 0.490861] pci 0000:00:1f.2: reg 0x24: [mem 0xf0900000-0xf0901fff]
- [ 0.493772] pci 0000:00:1f.4: [106b:003f] type 00 class 0x0c0310
- [ 0.495891] pci 0000:00:1f.4: reg 0x10: [mem 0xf0902000-0xf0902fff]
- [ 0.505560] pci 0000:00:18.0: PCI bridge to [bus 01] (subtractive decode)
- [ 0.506249] pci 0000:00:18.0: bridge window [io 0x0000-0xffff] (subtractive decode)
- [ 0.506388] pci 0000:00:18.0: bridge window [mem 0x00000000-0xffffffff] (subtractive decode)
- [ 0.507028] pci 0000:00:19.0: PCI bridge to [bus 02] (subtractive decode)
- [ 0.507643] pci 0000:00:19.0: bridge window [io 0x0000-0xffff] (subtractive decode)
- [ 0.507737] pci 0000:00:19.0: bridge window [mem 0x00000000-0xffffffff] (subtractive decode)
- [ 0.507933] pci_bus 0000:00: on NUMA node 0
- [ 0.509476] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 9 10 *11)
- [ 0.511533] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *9 10 11)
- [ 0.513075] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 9 10 *11)
- [ 0.514558] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 *9 10 11)
- [ 0.518674] ACPI: Enabled 1 GPEs in block 00 to 07
- [ 0.519669] ACPI: \_SB_.PCI0: notify handler is installed
- [ 0.519748] Found 1 acpi root devices
- [ 0.523806] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
- [ 0.524580] vgaarb: loaded
- [ 0.525084] vgaarb: bridge control possible 0000:00:02.0
- [ 0.525911] PCI: Using ACPI for IRQ routing
- [ 0.526402] PCI: pci_cache_line_size set to 64 bytes
- [ 0.526912] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
- [ 0.527002] e820: reserve RAM buffer [mem 0x7fff0000-0x7fffffff]
- [ 0.532156] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
- [ 0.532625] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
- [ 0.533871] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
- [ 0.546490] Switched to clocksource hpet
- [ 0.549596] pnp: PnP ACPI init
- [ 0.550057] ACPI: bus type PNP registered
- [ 0.550725] pnp 00:00: Plug and Play ACPI device, IDs PNP0303 (active)
- [ 0.550758] pnp 00:01: [dma 4]
- [ 0.550789] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
- [ 0.550907] pnp 00:02: Plug and Play ACPI device, IDs PNP0f03 (active)
- [ 0.550965] pnp 00:03: Plug and Play ACPI device, IDs PNP0400 (active)
- [ 0.551048] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
- [ 0.551444] system 00:05: [mem 0xfed00000-0xfed003ff] has been reserved
- [ 0.551831] system 00:05: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
- [ 0.554121] pnp: PnP ACPI: found 6 devices
- [ 0.554477] ACPI: bus type PNP unregistered
- [ 0.554820] PnPBIOS: Disabled by ACPI PNP
- [ 0.597552] pci 0000:00:18.0: PCI bridge to [bus 01]
- [ 0.598034] pci 0000:00:19.0: PCI bridge to [bus 02]
- [ 0.598539] pci 0000:00:18.0: setting latency timer to 64
- [ 0.598610] pci 0000:00:19.0: setting latency timer to 64
- [ 0.598630] pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
- [ 0.598638] pci_bus 0000:00: resource 5 [mem 0x00000000-0xffffffff]
- [ 0.598648] pci_bus 0000:01: resource 4 [io 0x0000-0xffff]
- [ 0.598655] pci_bus 0000:01: resource 5 [mem 0x00000000-0xffffffff]
- [ 0.598662] pci_bus 0000:02: resource 4 [io 0x0000-0xffff]
- [ 0.598669] pci_bus 0000:02: resource 5 [mem 0x00000000-0xffffffff]
- [ 0.600484] NET: Registered protocol family 2
- [ 0.613574] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
- [ 0.614189] TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
- [ 0.614722] TCP: Hash tables configured (established 8192 bind 8192)
- [ 0.615324] TCP: reno registered
- [ 0.616717] UDP hash table entries: 512 (order: 1, 8192 bytes)
- [ 0.617206] UDP-Lite hash table entries: 512 (order: 1, 8192 bytes)
- [ 0.619218] NET: Registered protocol family 1
- [ 0.619833] pci 0000:00:02.0: Boot video device
- [ 0.624874] PCI: CLS 0 bytes, default 64
- [ 0.625116] Unpacking initramfs...
- [ 1.305365] Freeing initrd memory: 21788K (f5562000 - f6aa9000)
- [ 1.321888] audit: initializing netlink socket (disabled)
- [ 1.324362] type=2000 audit(1395077614.324:1): initialized
- [ 1.339802] bounce pool size: 64 pages
- [ 1.340230] HugeTLB registered 4 MB page size, pre-allocated 0 pages
- [ 1.342603] VFS: Disk quotas dquot_6.5.2
- [ 1.342986] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
- [ 1.343574] msgmni has been set to 1728
- [ 1.362966] alg: No test for stdrng (krng)
- [ 1.363521] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
- [ 1.364676] io scheduler noop registered
- [ 1.365024] io scheduler deadline registered
- [ 1.365384] io scheduler cfq registered (default)
- [ 1.365928] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
- [ 1.366418] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
- [ 1.367651] GHES: HEST is not enabled!
- [ 1.368976] isapnp: Scanning for PnP cards...
- [ 1.729759] isapnp: No Plug & Play device found
- [ 1.730286] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
- [ 1.739379] Linux agpgart interface v0.103
- [ 1.740703] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
- [ 2.280717] serio: i8042 KBD port at 0x60,0x64 irq 1
- [ 2.281507] serio: i8042 AUX port at 0x60,0x64 irq 12
- [ 2.282722] mousedev: PS/2 mouse device common for all mice
- [ 2.292799] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
- [ 2.296705] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
- [ 2.300766] rtc_cmos 00:04: alarms up to one day, 114 bytes nvram, hpet irqs
- [ 2.301382] platform eisa.0: Probing EISA bus 0
- [ 2.301852] platform eisa.0: EISA: Detected 0 cards
- [ 2.302327] cpuidle: using governor ladder
- [ 2.302673] cpuidle: using governor menu
- [ 2.303234] TCP: cubic registered
- [ 2.303645] NET: Registered protocol family 10
- [ 2.314347] mip6: Mobile IPv6
- [ 2.314982] NET: Registered protocol family 17
- [ 2.315717] mpls_gso: MPLS GSO support
- [ 2.317907] Using IPI Shortcut mode
- [ 2.318780] PM: Hibernation image not present or could not be loaded.
- [ 2.318835] registered taskstats version 1
- [ 2.320887] rtc_cmos 00:04: setting system clock to 2014-03-17 17:33:36 UTC (1395077616)
- [ 2.332042] Freeing unused kernel memory: 536K (c1523000 - c15a9000)
- [ 2.339394] Write protecting the kernel text: 3716k
- [ 2.340985] Write protecting the kernel read-only data: 1192k
- [ 2.516876] systemd-udevd[48]: starting version 204
- [ 2.792004] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
- [ 2.792465] e1000: Copyright (c) 1999-2006 Intel Corporation.
- [ 2.828304] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
- [ 2.828833] ACPI: Power Button [PWRF]
- [ 2.829436] input: Sleep Button as /devices/LNXSYSTM:00/LNXSLPBN:00/input/input2
- [ 2.829933] ACPI: Sleep Button [SLPF]
- [ 2.937076] e1000 0000:00:03.0: setting latency timer to 64
- [ 3.319728] tsc: Refined TSC clocksource calibration: 2394.538 MHz
- [ 3.448956] SCSI subsystem initialized
- [ 3.463709] ACPI: bus type USB registered
- [ 3.471790] usbcore: registered new interface driver usbfs
- [ 3.472413] usbcore: registered new interface driver hub
- [ 3.478890] usbcore: registered new device driver usb
- [ 3.493983] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 3.495993] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
- [ 3.513075] ACPI: bus type ATA registered
- [ 3.515203] ohci-pci: OHCI PCI platform driver
- [ 3.521002] libata version 3.00 loaded.
- [ 3.625463] e1000 0000:00:03.0 eth0: (PCI:33MHz:32-bit) 08:00:27:81:39:62
- [ 3.625911] e1000 0000:00:03.0 eth0: Intel(R) PRO/1000 Network Connection
- [ 3.630244] ohci-pci 0000:00:1f.4: setting latency timer to 64
- [ 3.630284] ohci-pci 0000:00:1f.4: OHCI PCI host controller
- [ 3.632005] ohci-pci 0000:00:1f.4: new USB bus registered, assigned bus number 1
- [ 3.638697] ohci-pci 0000:00:1f.4: irq 23, io mem 0xf0902000
- [ 3.705407] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
- [ 3.705989] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 3.706590] usb usb1: Product: OHCI PCI host controller
- [ 3.707004] usb usb1: Manufacturer: Linux 3.11-2-486 ohci_hcd
- [ 3.707371] usb usb1: SerialNumber: 0000:00:1f.4
- [ 3.708795] hub 1-0:1.0: USB hub found
- [ 3.709153] hub 1-0:1.0: 8 ports detected
- [ 3.716896] ata_piix 0000:00:1f.1: version 2.13
- [ 3.719270] ata_piix 0000:00:1f.1: setting latency timer to 64
- [ 3.748236] scsi0 : ata_piix
- [ 3.750592] scsi1 : ata_piix
- [ 3.751639] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xe000 irq 14
- [ 3.752079] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xe008 irq 15
- [ 3.776520] ahci 0000:00:1f.2: version 3.0
- [ 3.777721] ahci 0000:00:1f.2: irq 40 for MSI/MSI-X
- [ 3.777993] ahci: SSS flag set, parallel bus scan disabled
- [ 3.778613] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl SATA mode
- [ 3.779144] ahci 0000:00:1f.2: flags: 64bit ncq stag only ccc
- [ 3.779539] ahci 0000:00:1f.2: setting latency timer to 64
- [ 3.799368] scsi2 : ahci
- [ 3.800162] ata3: SATA max UDMA/133 abar m8192@0xf0900000 port 0xf0900100 irq 40
- [ 3.971049] ata2.00: ATAPI: VBOX CD-ROM, 1.0, max UDMA/133
- [ 3.972235] ata2.00: configured for UDMA/100
- [ 4.015240] scsi 1:0:0:0: CD-ROM VBOX CD-ROM 1.0 PQ: 0 ANSI: 5
- [ 4.120325] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
- [ 4.126496] ata3.00: ATA-6: VBOX HARDDISK, 1.0, max UDMA/133
- [ 4.126877] ata3.00: 25399328 sectors, multi 128: LBA48 NCQ (depth 31/32)
- [ 4.128382] ata3.00: configured for UDMA/133
- [ 4.137027] scsi 2:0:0:0: Direct-Access ATA VBOX HARDDISK 1.0 PQ: 0 ANSI: 5
- [ 4.145640] usb 1-1: new full-speed USB device number 2 using ohci-pci
- [ 4.209026] sr0: scsi3-mmc drive: 32x/32x xa/form2 tray
- [ 4.209553] cdrom: Uniform CD-ROM driver Revision: 3.20
- [ 4.211527] sr 1:0:0:0: Attached scsi CD-ROM sr0
- [ 4.233612] sd 2:0:0:0: [sda] 25399328 512-byte logical blocks: (13.0 GB/12.1 GiB)
- [ 4.248212] sd 2:0:0:0: [sda] Write Protect is off
- [ 4.248586] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
- [ 4.248773] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 4.270759] sr 1:0:0:0: Attached scsi generic sg0 type 5
- [ 4.271923] sd 2:0:0:0: Attached scsi generic sg1 type 0
- [ 4.307685] sda: sda1 sda2
- [ 4.310087] sd 2:0:0:0: [sda] Attached SCSI disk
- [ 4.422718] usb 1-1: New USB device found, idVendor=80ee, idProduct=0021
- [ 4.423132] usb 1-1: New USB device strings: Mfr=1, Product=3, SerialNumber=0
- [ 4.423571] usb 1-1: Product: USB Tablet
- [ 4.423916] usb 1-1: Manufacturer: VirtualBox
- [ 4.456173] Switched to clocksource tsc
- [ 4.471683] hidraw: raw HID events driver (C) Jiri Kosina
- [ 4.485847] usbcore: registered new interface driver usbhid
- [ 4.486342] usbhid: USB HID core driver
- [ 4.544403] input: VirtualBox USB Tablet as /devices/pci0000:00/0000:00:1f.4/usb1/1-1/1-1:1.0/input/input3
- [ 4.545529] hid-generic 0003:80EE:0021.0001: input,hidraw0: USB HID v1.10 Mouse [VirtualBox USB Tablet] on usb-0000:00:1f.4-1/input0
- [ 4.722571] uvesafb: Oracle Corporation, Oracle VM VirtualBox VBE Adapter, Oracle VM VirtualBox Version 4.2.22, OEM: VirtualBox VESA BIOS, VBE v2.0
- [ 4.843682] uvesafb: protected mode interface info at c000:4600
- [ 4.844122] uvesafb: pmi: set display start = c00c464f, set palette = c00c4710
- [ 4.844648] uvesafb: pmi: ports = 1ce 1cf 1cf 1d0 3b6 3b7
- [ 4.846339] uvesafb: no monitor limits have been set, default refresh rate will be used
- [ 4.847743] uvesafb: scrolling: ywrap using protected mode interface, yres_virtual=5000
- [ 4.871339] Console: switching to colour frame buffer device 128x48
- [ 4.889413] uvesafb: framebuffer at 0xe0000000, mapped to 0xf8200000, using 15000k, total 131072k
- [ 4.889684] fb0: VESA VGA frame buffer device
- [ 4.936123] device-mapper: uevent: version 1.0.3
- [ 4.937501] device-mapper: ioctl: 4.25.0-ioctl (2013-06-26) initialised: dm-devel@redhat.com
- [ 5.053507] EXT4-fs (sda2): INFO: recovery required on readonly filesystem
- [ 5.053640] EXT4-fs (sda2): write access will be enabled during recovery
- [ 5.690234] EXT4-fs (sda2): orphan cleanup on readonly fs
- [ 5.690613] EXT4-fs (sda2): 3 orphan inodes deleted
- [ 5.690691] EXT4-fs (sda2): recovery complete
- [ 5.724848] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
- [ 8.686293] systemd-udevd[304]: starting version 204
- [ 9.370893] piix4_smbus 0000:00:07.0: SMBus base address uninitialized - upgrade BIOS or use force_addr=0xaddr
- [ 9.387095] intel_rng: FWH not detected
- [ 9.453589] input: Unspecified device as /devices/pci0000:00/0000:00:04.0/input/input4
- [ 9.465525] vboxguest: major 0, IRQ 20, I/O port d020, MMIO at 00000000f0400000 (size 0x400000)
- [ 9.478930] vboxguest: Successfully loaded version 4.2.16_Debian (interface 0x00010004)
- [ 9.606666] lpc_ich 0000:00:1f.0: I/O space for GPIO uninitialized
- [ 9.623796] ACPI: AC Adapter [AC] (on-line)
- [ 9.655994] leds_ss4200: no LED devices found
- [ 9.716170] ACPI: Battery Slot [BAT0] (battery present)
- [ 9.896030] parport_pc 00:03: reported by Plug and Play ACPI
- [ 10.031930] input: PC Speaker as /devices/platform/pcspkr/input/input5
- [ 10.243045] microcode: CPU0 sig=0x206a7, pf=0x1, revision=0x0
- [ 10.325164] psmouse serio1: hgpk: ID: 10 00 64
- [ 10.326833] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input6
- [ 10.554608] platform microcode: firmware: agent aborted loading intel-ucode/06-2a-07 (not found?)
- [ 10.555007] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
- [ 10.621517] iTCO_vendor_support: vendor-support=0
- [ 10.630786] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
- [ 10.631289] iTCO_wdt: Found a ICH7-M or ICH7-U TCO device (Version=2, TCOBASE=0x8060)
- [ 10.631494] iTCO_wdt: timeout value out of range, using 30
- [ 10.634446] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
- [ 10.694603] snd_intel8x0 0000:00:05.0: setting latency timer to 64
- [ 11.028335] intel8x0_measure_ac97_clock: measured 54003 usecs (13391 samples)
- [ 11.028536] intel8x0: measured clock 247967 rejected
- [ 11.388312] intel8x0_measure_ac97_clock: measured 55419 usecs (12625 samples)
- [ 11.388493] intel8x0: measured clock 227809 rejected
- [ 11.748257] intel8x0_measure_ac97_clock: measured 54779 usecs (12853 samples)
- [ 11.748445] intel8x0: measured clock 234633 rejected
- [ 11.748557] intel8x0: clocking to 48000
- [ 15.346878] Adding 2103484k swap on /dev/sda1. Priority:-1 extents:1 across:2103484k
- [ 15.590350] EXT4-fs (sda2): re-mounted. Opts: (null)
- [ 16.072345] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
- [ 18.688924] fuse init (API version 7.22)
- [ 28.708181] [drm] Initialized drm 1.1.0 20060810
- [ 28.742438] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
- [ 28.742651] [drm] No driver support for vblank timestamp query.
- [ 28.742809] [drm] Initialized vboxvideo 1.0.0 20090303 for 0000:00:02.0 on minor 0
- [ 30.758470] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input7
- [ 37.890069] Bluetooth: Core ver 2.16
- [ 37.890462] NET: Registered protocol family 31
- [ 37.890600] Bluetooth: HCI device and connection manager initialized
- [ 37.891582] Bluetooth: HCI socket layer initialized
- [ 37.891717] Bluetooth: L2CAP socket layer initialized
- [ 37.891849] Bluetooth: SCO socket layer initialized
- [ 37.928686] Bluetooth: RFCOMM TTY layer initialized
- [ 37.928875] Bluetooth: RFCOMM socket layer initialized
- [ 37.929022] Bluetooth: RFCOMM ver 1.11
- [ 37.940353] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
- [ 37.940570] Bluetooth: BNEP filters: protocol multicast
- [ 37.940762] Bluetooth: BNEP socket layer initialized
- [ 38.317840] lp: driver loaded but no devices found
- [ 38.345672] ppdev: user-space parallel port driver
- [ 41.992902] e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
- [ 47.913192] vboxsf: Successfully loaded version 4.2.16_Debian (interface 0x00010004)
- [ 63.024317] systemd-logind[2782]: New seat seat0.
- [ 63.052849] systemd-logind[2782]: New session c1 of user virtony.
- [ 63.053046] systemd-logind[2782]: Linked /tmp/.X11-unix/X0 to /run/user/1000/X11-display.
- [ 72.773668] VBoxGuest: VBoxGuestCommonGuestCapsAcquire: pSession(0xf6b9fa10), OR(0x0), NOT(0xffffffff), flags(0x0)
- [ 95.317525] VBoxGuest: VBoxGuestCommonGuestCapsAcquire: pSession(0xf6b17010), OR(0x0), NOT(0xffffffff), flags(0x0)
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement