API tools faq
paste
Advertisement
neochapay

Untitled

neochapay
Jan 25th, 2017
269
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 69.34 KB | None | 0 0
raw download clone embed print report
  1. [ 0.000000] Booting Linux on physical CPU 0x500
  2. [ 0.000000] Initializing cgroup subsys cpu
  3. [ 0.000000] Initializing cgroup subsys cpuacct
  4. [ 0.000000] Linux version 3.10.0 (user@inp1wst007) (gcc version 4.6.x-google 20120106 (prerelease) (GCC) ) #150 SMP PREEMPT Mon Jan 23 13:30:46 UTC 2017
  5. [ 0.000000] CPU: ARMv7 Processor [410fc0d1] revision 1 (ARMv7), cr=10c5387d
  6. [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
  7. [ 0.000000] Machine: Rockchip RK3288 (Flattened Device Tree), model: rockchip,rk3288
  8. [ 0.000000] rockchip_uboot_logo_setup: mem: 0x02000000@0x7dc00000, offset:0x00000000
  9. [ 0.000000] rockchip_uboot_mem_reserve: reserve 0x02000000@0x7dc00000 for uboot logo
  10. [ 0.000000] rockchip_ion_reserve
  11. [ 0.000000] ion heap(drm): base(0) size(0) align(0)
  12. [ 0.000000] ion heap(cma): base(0) size(28000000) align(0)
  13. [ 0.000000] ion heap(vmalloc): base(0) size(0) align(0)
  14. [ 0.000000] cma: CMA: reserved 640 MiB at 55c00000
  15. [ 0.000000] ion_reserve: cma reserved base 55c00000 size 671088640
  16. [ 0.000000] cma: CMA: reserved 16 MiB at 1f000000
  17. [ 0.000000] Memory policy: ECC disabled, Data cache writealloc
  18. [ 0.000000] Boot mode: REBOOT (6) flag: NORMAL (0xc3524200)
  19. [ 0.000000] On node 0 totalpages: 524288
  20. [ 0.000000] free_area_init_node: node 0, pgdat c0d1d080, node_mem_map c0e48000
  21. [ 0.000000] Normal zone: 1024 pages used for memmap
  22. [ 0.000000] Normal zone: 0 pages reserved
  23. [ 0.000000] Normal zone: 131072 pages, LIFO batch:31
  24. [ 0.000000] HighMem zone: 3072 pages used for memmap
  25. [ 0.000000] HighMem zone: 393216 pages, LIFO batch:31
  26. [ 0.000000] PERCPU: Embedded 9 pages/cpu @c1ea6000 s13376 r8192 d15296 u36864
  27. [ 0.000000] pcpu-alloc: s13376 r8192 d15296 u36864 alloc=9*4096
  28. [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
  29. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 523264
  30. [ 0.000000] Kernel command line: vmalloc=496M console=ttyFIQ0 androidboot.selinux=disabled selinux=0 audit=0 androidboot.hardware=rk30board androidboot.console=ttyFIQ0 init2
  31. [ 0.000000] audit: disabled (until reboot)
  32. [ 0.000000] battery charged in loader
  33. [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
  34. [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
  35. [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
  36. [ 0.000000] allocated 4194304 bytes of page_cgroup
  37. [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
  38. [ 0.000000] Memory: 2048MB = 2048MB total
  39. [ 0.000000] Memory: 1355840k/1355840k available, 741312k reserved, 884736K highmem
  40. [ 0.000000] Virtual kernel memory layout:
  41. vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  42. fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
  43. vmalloc : 0xe0800000 - 0xff000000 ( 488 MB)
  44. lowmem : 0xc0000000 - 0xe0000000 ( 512 MB)
  45. pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
  46. modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
  47. .text : 0xc0008000 - 0xc0ba1f6c (11880 kB)
  48. .init : 0xc0ba2000 - 0xc0bfb440 ( 358 kB)
  49. .data : 0xc0bfc000 - 0xc0d246c0 (1186 kB)
  50. .bss : 0xc0d246c0 - 0xc0e4783c (1165 kB)
  51. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
  52. [ 0.000000] Preemptible hierarchical RCU implementation.
  53. [ 0.000000] RCU dyntick-idl.
  54. [ 0.000000] NR_IRQS:16 nr_irqs:16 16
  55. [ 0.000000] rk_clk_tree_init start!
  56. [ 0.000000] rkclk: _rkclk_add_provider: fail to get ehci1phy_12m_div
  57. [ 0.000000] rkclk: rkclk_cache_parents: ehci1phy_12m_div clk_get error
  58. [ 0.000000] rk_get_uboot_display_flag: uboot_logo_on = 1
  59. [ 0.000000] rkclk_init_clks: cnt_parent = 7
  60. [ 0.000000] rkclk_init_clks: cnt_rate = 28
  61. [ 0.000000] rk3288 set GPLL BW 20 for HDMI!
  62. [ 0.000000] Architected cp15 timer(s) running at 24.00MHz (phys).
  63. [ 0.000000] Switching to timer-based delay loop
  64. [ 0.000000] sched_clock: ARM arch timer >56 bits at 24000kHz, resolution 41ns
  65. [ 0.000000] process version: 3
  66. [ 0.000000] channel:0, lkg:10
  67. [ 0.000000] target-temp:80
  68. [ 0.000000] channel:2, lkg:0
  69. [ 0.000000] channel:0, lkg:10
  70. [ 0.000000] channel:1, lkg:8
  71. [ 0.000000] sched_clock: 32 bits at 100 Hz, resolution 10000000ns, wraps every 4294967286ms
  72. [ 0.000000] Console: colour dummy device 80x30
  73. [ 0.347894] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000)
  74. [ 0.347909] pid_max: default: 32768 minimum: 301
  75. [ 0.348022] Security Framework initialized
  76. [ 0.348038] SELinux: Disabled at boot.
  77. [ 0.348074] Mount-cache hash table entries: 512
  78. [ 0.348686] Initializing cgroup subsys debug
  79. [ 0.348700] Initializing cgroup subsys memory
  80. [ 0.348728] Initializing cgroup subsys freezer
  81. [ 0.348757] CPU: Testing write buffer coherency: ok
  82. [ 0.349063] /cpus/cpu@0 missing clock-frequency property
  83. [ 0.349076] /cpus/cpu@1 missing clock-frequency property
  84. [ 0.349086] /cpus/cpu@2 missing clock-frequency property
  85. [ 0.349095] /cpus/cpu@3 missing clock-frequency property
  86. [ 0.349152] CPU0: thread -1, cpu 0, socket 5, mpidr 80000500
  87. [ 0.349202] Setting up static identity map for 0xc0868b48 - 0xc0868ba0
  88. [ 0.352264] last_log: 0x1e900000 map to 0xe0804000 and copy to 0xe0886000, size 0x80000 early 0x1884 (version 3.1)
  89. [ 0.425908] CPU1: Booted secondary processor
  90. [ 0.425941] CPU1: thread -1, cpu 1, socket 5, mpidr 80000501
  91. [ 0.445589] CPU2: Booted secondary processor
  92. [ 0.445613] CPU2: thread -1, cpu 2, socket 5, mpidr 80000502
  93. [ 0.465303] CPU3: Booted secondary processor
  94. [ 0.465327] CPU3: thread -1, cpu 3, socket 5, mpidr 80000503
  95. [ 0.465429] Brought up 4 CPUs
  96. [ 0.465457] SMP: Total of 4 processors activated (192.00 BogoMIPS).
  97. [ 0.465466] CPU: All CPU(s) started in SVC mode.
  98. [ 0.466163] devtmpfs: initialized
  99. [ 0.470628] VFP support v0.3: implementor 41 architecture 3 part 30 variant d rev 0
  100. [ 0.471730] pinctrl core: initialized pinctrl subsystem
  101. [ 0.471969] regulator-dummy: no parameters
  102. [ 0.497130] NET: Registered protocol family 16
  103. [ 0.499039] DMA: preallocated 256 KiB pool for atomic coherent allocations
  104. [ 0.499443] ion_snapshot: 0x1ea90000 map to 0xe0907000 and copy to 0xc0e22d4c (version 0.1)
  105. [ 0.499673] Registered FIQ tty driver
  106. [ 0.500977] console [ttyFIQ0] enabled
  107. [ 0.501187] Registered fiq debugger ttyFIQ0
  108. [ 0.501914] rockchip_get_bank_data:name=base start=0xff750000,end=0xff7500ff
  109. [ 0.501938] rockchip_get_bank_data:name=mux_bank0 start=0xff730084,end=0xff73008f
  110. [ 0.501957] rockchip_get_bank_data:name=pull_bank0 start=0xff730064,end=0xff73006f
  111. [ 0.501975] rockchip_get_bank_data:name=drv_bank0 start=0xff730070,end=0xff73007b
  112. [ 0.502072] rockchip_get_bank_data:name=/pinctrl@ff770000/gpio1@ff780000 start=0xff780000,end=0xff7800ff
  113. [ 0.502140] rockchip_get_bank_data:name=/pinctrl@ff770000/gpio2@ff790000 start=0xff790000,end=0xff7900ff
  114. [ 0.502213] rockchip_get_bank_data:name=/pinctrl@ff770000/gpio3@ff7a0000 start=0xff7a0000,end=0xff7a00ff
  115. [ 0.502280] rockchip_get_bank_data:name=/pinctrl@ff770000/gpio4@ff7b0000 start=0xff7b0000,end=0xff7b00ff
  116. [ 0.502345] rockchip_get_bank_data:name=/pinctrl@ff770000/gpio5@ff7c0000 start=0xff7c0000,end=0xff7c00ff
  117. [ 0.502411] rockchip_get_bank_data:name=/pinctrl@ff770000/gpio6@ff7d0000 start=0xff7d0000,end=0xff7d00ff
  118. [ 0.502475] rockchip_get_bank_data:name=/pinctrl@ff770000/gpio7@ff7e0000 start=0xff7e0000,end=0xff7e00ff
  119. [ 0.502541] rockchip_get_bank_data:name=/pinctrl@ff770000/gpio8@ff7f0000 start=0xff7f0000,end=0xff7f00ff
  120. [ 0.502613] rockchip_get_bank_data:name=/pinctrl@ff770000/gpio15@ff7f2000 start=0xff7f2000,end=0xff7f20ff
  121. [ 0.502682] rockchip_pinctrl_probe:name=RK3288-GPIO,type=3
  122. [ 0.502697] rockchip_pinctrl_probe:name=base start=0xff770000,end=0xff77013f
  123. [ 0.502711] rockchip_pinctrl_probe:name=pull start=0xff770140,end=0xff7701bf
  124. [ 0.502725] rockchip_pinctrl_probe:name=drv start=0xff7701c0,end=0xff77023f
  125. [ 0.502804] gpiochip_add: registered GPIOs 0 to 31 on device: gpio0
  126. [ 0.502869] gpiochip_add: registered GPIOs 32 to 63 on device: gpio1
  127. [ 0.502926] gpiochip_add: registered GPIOs 64 to 95 on device: gpio2
  128. [ 0.502984] gpiochip_add: registered GPIOs 96 to 127 on device: gpio3
  129. [ 0.503045] gpiochip_add: registered GPIOs 128 to 159 on device: gpio4
  130. [ 0.503103] gpiochip_add: registered GPIOs 160 to 191 on device: gpio5
  131. [ 0.503160] gpiochip_add: registered GPIOs 192 to 223 on device: gpio6
  132. [ 0.503222] gpiochip_add: registered GPIOs 224 to 255 on device: gpio7
  133. [ 0.503279] gpiochip_add: registered GPIOs 256 to 287 on device: gpio8
  134. [ 0.503334] gpiochip_add: registered GPIOs 288 to 319 on device: gpio15
  135. [ 0.503362] rockchip_interrupts_register:bank_num=7
  136. [ 0.505327] of_get_named_gpio_flags exited with status 6
  137. [ 0.505340] of_get_gpio_init_config:gpio[0] = 6, value = 0
  138. [ 0.505398] rockchip_pinctrl_probe:init ok
  139. [ 0.512200] rk_iommu ff900800.iep_mmu: (iep) Enter
  140. [ 0.512285] rk_iommu ff900800.iep_mmu: IOVMM: Created 0x3ffff000 B IOVMM from 0x10000000.
  141. [ 0.512302] rk_iommu ff900800.iep_mmu: (iep) Initialized
  142. [ 0.512470] rk_iommu ff950800.vip_mmu: (vip) Enter
  143. [ 0.512544] rk_iommu ff950800.vip_mmu: IOVMM: Created 0x3ffff000 B IOVMM from 0x10000000.
  144. [ 0.512559] rk_iommu ff950800.vip_mmu: (vip) Initialized
  145. [ 0.512733] rk_iommu ff930300.vopb_mmu: (vopb) Enter
  146. [ 0.512807] rk_iommu ff930300.vopb_mmu: IOVMM: Created 0x3ffff000 B IOVMM from 0x10000000.
  147. [ 0.512823] rk_iommu ff930300.vopb_mmu: (vopb) Initialized
  148. [ 0.512989] rk_iommu ff940300.vopl_mmu: (vopl) Enter
  149. [ 0.513061] rk_iommu ff940300.vopl_mmu: IOVMM: Created 0x3ffff000 B IOVMM from 0x10000000.
  150. [ 0.513076] rk_iommu ff940300.vopl_mmu: (vopl) Initialized
  151. [ 0.513252] rk_iommu ff9c0440.hevc_mmu: (hevc) Enter
  152. [ 0.513324] rk_iommu ff9c0440.hevc_mmu: IOVMM: Created 0x3ffff000 B IOVMM from 0x10000000.
  153. [ 0.513339] rk_iommu ff9c0440.hevc_mmu: (hevc) Initialized
  154. [ 0.513503] rk_iommu ff9a0800.vpu_mmu: (vpu) Enter
  155. [ 0.513574] rk_iommu ff9a0800.vpu_mmu: IOVMM: Created 0x3ffff000 B IOVMM from 0x10000000.
  156. [ 0.513589] rk_iommu ff9a0800.vpu_mmu: (vpu) Initialized
  157. [ 0.513770] rk_iommu ff914000.isp_mmu: (isp_mmu) Enter
  158. [ 0.513846] rk_iommu ff914000.isp_mmu: IOVMM: Created 0x3ffff000 B IOVMM from 0x10000000.
  159. [ 0.513861] rk_iommu ff914000.isp_mmu: (isp_mmu) Initialized
  160. [ 0.515863] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
  161. [ 0.515880] hw-breakpoint: maximum watchpoint size is 4 bytes.
  162. [ 0.516563] rk3368_init_rockchip_pmu_ops: could not find pmu dt node
  163. [ 0.516590] DDR DEBUG: version 1.00 20150126
  164. [ 0.516620] DDR DEBUG: Channel a:
  165. [ 0.516630] DDR DEBUG: DDR3 Device
  166. [ 0.516645] DDR DEBUG: Bus Width=32 Col=10 Bank=8 Row=15 CS=1 Total Capability=1024MB
  167. [ 0.516656] DDR DEBUG: Channel b:
  168. [ 0.516665] DDR DEBUG: DDR3 Device
  169. [ 0.516679] DDR DEBUG: Bus Width=32 Col=10 Bank=8 Row=15 CS=1 Total Capability=1024MB
  170. [ 0.516691] DDR DEBUG: addr=0xd2e000
  171. [ 0.516703] DDR DEBUG: stride=9, size=256, halfcap=40000000
  172. [ 0.516714] DDR DEBUG: socAddr[0]=0xd2e000, socAddr[1]=0xd2e100
  173. [ 0.516725] DDR DEBUG: chAddr[0]=0xd2e000, chAddr[1]=0xd2e000
  174. [ 0.516739] DDR DEBUG: dtar[0]=0x601a5000, dtar[1]=0x601a5000
  175. [ 0.516797] DDR DEBUG: init success!!! freq=200MHz
  176. [ 0.516808] DDR DEBUG: Channel a:
  177. [ 0.516821] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=4,0, DGSL=1,0 extra clock, DGPS=180,270
  178. [ 0.516837] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=4,0, DGSL=1,0 extra clock, DGPS=180,270
  179. [ 0.516853] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=4,0, DGSL=1,0 extra clock, DGPS=180,270
  180. [ 0.516869] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=4,0, DGSL=1,0 extra clock, DGPS=180,270
  181. [ 0.516883] DDR DEBUG: ZERR=0, ZDONE=0, ZPD=0x0, ZPU=0x0, OPD=0x0, OPU=0x0
  182. [ 0.516894] DDR DEBUG: DRV Pull-Up=0x19, DRV Pull-Dwn=0x19
  183. [ 0.516905] DDR DEBUG: ODT Pull-Up=0x2, ODT Pull-Dwn=0x2
  184. [ 0.516914] DDR DEBUG: Channel b:
  185. [ 0.516927] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=4,0, DGSL=1,0 extra clock, DGPS=180,270
  186. [ 0.516942] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=4,0, DGSL=1,0 extra clock, DGPS=180,270
  187. [ 0.516957] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=4,0, DGSL=1,0 extra clock, DGPS=180,270
  188. [ 0.516972] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=4,0, DGSL=1,0 extra clock, DGPS=180,270
  189. [ 0.516986] DDR DEBUG: ZERR=0, ZDONE=0, ZPD=0x0, ZPU=0x0, OPD=0x0, OPU=0x0
  190. [ 0.516998] DDR DEBUG: DRV Pull-Up=0x19, DRV Pull-Dwn=0x19
  191. [ 0.517008] DDR DEBUG: ODT Pull-Up=0x2, ODT Pull-Dwn=0x2
  192. [ 0.540898] bio: create slab <bio-0> at 0
  193. [ 0.541425] Rockchip hdmi driver version 2.0
  194. .bp_register_slave:sim7100e,id=16
  195. [ 0.542741] SCSI subsystem initialized
  196. [ 0.542905] usbcore: registered new interface driver usbfs
  197. [ 0.542956] usbcore: registered new interface driver hub
  198. [ 0.543046] usbcore: registered new device driver usb
  199. [ 0.543327] of_get_named_gpio_flags exited with status 14
  200. [ 0.543358] of_get_named_gpio_flags exited with status 12
  201. [ 0.544493] of_get_named_gpio_flags exited with status 15
  202. [ 0.544514] of_get_named_gpio_flags exited with status 16
  203. [ 0.545743] i2c i2c-0: of_i2c: modalias failure on /i2c@ff650000/ricoh619@32
  204. [ 0.546229] rockchip_i2c ff650000.i2c: i2c-0: Rockchip I2C adapter
  205. [ 0.546340] of_get_named_gpio_flags exited with status 260
  206. [ 0.546360] of_get_named_gpio_flags exited with status 261
  207. [ 0.547290] i2c i2c-1: 1 i2c clients have been registered at 0x68
  208. [ 0.547424] rockchip_i2c ff140000.i2c: i2c-1: Rockchip I2C adapter
  209. [ 0.547526] of_get_named_gpio_flags exited with status 201
  210. [ 0.547545] of_get_named_gpio_flags exited with status 202
  211. [ 0.547872] rockchip_i2c ff660000.i2c: i2c-2: Rockchip I2C adapter
  212. [ 0.547979] of_get_named_gpio_flags exited with status 81
  213. [ 0.547997] of_get_named_gpio_flags exited with status 80
  214. [ 0.548122] rockchip_i2c ff150000.i2c: i2c-3: Rockchip I2C adapter
  215. [ 0.548224] of_get_named_gpio_flags exited with status 241
  216. [ 0.548242] of_get_named_gpio_flags exited with status 242
  217. [ 0.548569] rockchip_i2c ff160000.i2c: i2c-4: Rockchip I2C adapter
  218. [ 0.548703] media: Linux media interface: v0.10
  219. [ 0.548744] Linux video capture interface: v2.00
  220. [ 0.548868] pps_core: LinuxPPS API ver. 1 registered
  221. [ 0.548881] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
  222. [ 0.548906] PTP clock support registered
  223. [ 0.548969] i2c-core: driver [bq24296] using legacy suspend method
  224. [ 0.548981] i2c-core: driver [bq24296] using legacy resume method
  225. [ 0.549656] ion_drm_heap_create: 0@0
  226. [ 0.549780] Rockchip ion module is successfully loaded (v1.1)
  227. [ 0.549952] Advanced Linux Sound Architecture Driver Initialized.
  228. [ 0.550337] Bluetooth: Core ver 2.16
  229. [ 0.550373] NET: Registered protocol family 31
  230. [ 0.550385] Bluetooth: HCI device and connection manager initialized
  231. [ 0.550402] Bluetooth: HCI socket layer initialized
  232. [ 0.550417] Bluetooth: L2CAP socket layer initialized
  233. [ 0.550444] Bluetooth: SCO socket layer initialized
  234. [ 0.550687] cfg80211: Calling CRDA to update world regulatory domain
  235. [ 0.551771] act8846_i2c_probe,line=880
  236. [ 0.661984] act8846 set 0xf4 error!
  237. [ 0.662073] act8846: probe of 0-005a failed with error -11
  238. [ 0.662470] rockchip_i2c ff650000.i2c: Addr[0x0040] irq in STATE_IDLE, ipd = 0x33
  239. [ 0.666711] vdd_arm: 712 <--> 1500 mV at 1100 mV
  240. [ 0.721074] The device is not syr82x fffffff5
  241. [ 0.721097] syr82x: probe of 0-0041 failed with error -11
  242. [ 0.721588] rk808_i2c_probe,line=1355
  243. [ 0.780140] The device is not rk808 -11
  244. [ 0.780214] rk808: probe of 0-001b failed with error -11
  245. [ 0.780300] i2c-core: driver [rk816] using legacy suspend method
  246. [ 0.780313] i2c-core: driver [rk816] using legacy resume method
  247. [ 0.780358] rk818_i2c_probe,line=1240
  248. [ 0.780621] rockchip_i2c ff650000.i2c: Addr[0x001c] irq in STATE_IDLE, ipd = 0x33
  249. [ 0.780646] rk818_pre_init,line=1155
  250. [ 0.787036] of_get_named_gpio_flags exited with status 4
  251. [ 0.787050] of_get_named_gpio_flags exited with status 0
  252. [ 0.790529] vdd_logic: 712 <--> 1500 mV at 1100 mV
  253. [ 0.794286] vdd_gpu: 712 <--> 1500 mV at 900 mV
  254. [ 0.797847] rk818_dcdc3: 1200 mV
  255. [ 0.801594] vccio: 1800 <--> 3300 mV at 3300 mV
  256. [ 0.805163] rk818_ldo1: 3300 mV
  257. [ 0.808736] rk818_ldo2: 3300 mV
  258. [ 0.812305] rk818_ldo3: 1000 mV
  259. [ 0.815863] rk818_ldo4: 1800 mV
  260. [ 0.819413] rk818_ldo5: 3300 mV
  261. [ 0.822973] rk818_ldo6: 1000 mV
  262. [ 0.826527] rk818_ldo7: 1800 mV
  263. [ 0.830111] rk818_ldo8: 1800 mV
  264. [ 0.832586] vcc_sd: 1800 <--> 3300 mV at 3300 mV
  265. [ 0.833811] rk818_ldo10: at 3300 mV
  266. [ 0.835355] rk818_irq_init: rk818_pmic_irq=1
  267. [ 0.835733] i2c-core: driver [rk818] using legacy suspend method
  268. [ 0.835749] i2c-core: driver [rk818] using legacy resume method
  269. [ 0.836272] rk818_rtc_probe,line=542
  270. [ 0.845580] rk818-rtc rk818-rtc: rtc core: registered rk818 as rtc0
  271. [ 0.847547] rk818_rtc_probe:ok
  272. [ 0.849038] Switching to clocksource arch_sys_counter
  273. [ 0.869928] rga: Module initialized.
  274. [ 0.870620] rga2 ff920000.rga: rga ion client create success!
  275. [ 0.870776] rga: Driver loaded succesfully
  276. [ 0.870997] uboot-logo-on:1
  277. [ 0.871028] rk-fb rockchip-fb: rk fb ion client create success!
  278. [ 0.871044] rk-fb rockchip-fb: rockchip framebuffer driver probe
  279. [ 0.871357] rk-screen rk_screen.9: rockchip screen probe success
  280. [ 0.871529] rk32-lvds ff96c000.lvds: screen is not lvds/rgb!
  281. [ 0.871553] rk32-lvds: probe of ff96c000.lvds failed with error -22
  282. [ 0.871957] rk32-edp ff970000.edp: screen is not edp!
  283. [ 0.871977] rk32-edp: probe of ff970000.edp failed with error -22
  284. [ 0.872158] rk32-dsi
  285. [ 0.872290] dsi->host.irq =51
  286. [ 0.872311] load mipi dsi chip:rk_mipi_dsi.0 id:3133302a
  287. [ 0.872322] mipi_dsi v1.3 2014-04-17
  288. [ 0.872385] rk32-mipi ff960000.mipi: rk mipi_dsi probe success!
  289. [ 0.872400] rk32-mipi ff960000.mipi: rockchip mipi_dsi v1.1 2014-06-17
  290. [ 0.872977] of_get_named_gpio_flags exited with status 227
  291. [ 0.873001] of_get_named_gpio_flags exited with status 228
  292. [ 0.873231] graphics fb0: rockchip framebuffer registerd:fb0
  293. [ 0.873532] graphics fb1: rockchip framebuffer registerd:fb1
  294. [ 0.873690] graphics fb2: rockchip framebuffer registerd:fb2
  295. [ 0.873848] graphics fb3: rockchip framebuffer registerd:fb3
  296. [ 0.874073] rk3288-lcdc lcdc0: lcdc0: dclk:75000000>>fps:60
  297. [ 0.874090] rk3288-lcdc lcdc0: wakeup from standby!
  298. [ 0.890887] alloc_buffer:ion_phy_addr=0x55c00000
  299. [ 0.897251] fb0:phy:55c00000>>vir:e0991000>>len:0xc00000
  300. [ 0.901638] rk3288-lcdc lcdc0: lcdc0 probe ok, iommu disabled
  301. [ 0.901824] rk3288-lcdc lcdc1: can't find power_ctr node for lcdc1
  302. [ 0.901839] rk_fb_trsm_ops_get:un supported transmitter:0!
  303. [ 0.902058] graphics fb4: rockchip framebuffer registerd:fb4
  304. [ 0.902368] graphics fb5: rockchip framebuffer registerd:fb5
  305. [ 0.902533] graphics fb6: rockchip framebuffer registerd:fb6
  306. [ 0.902688] graphics fb7: rockchip framebuffer registerd:fb7
  307. [ 0.902947] unknow screen type: 0
  308. [ 0.903012] rk3288-lcdc lcdc1: lcdc1: dclk:75000000>>fps:601
  309. [ 0.903028] rk3288-lcdc lcdc1: wakeup from standby!
  310. [ 0.903042] fb4:phy:55c00000>>vir:e0991000>>len:0xc00000
  311. [ 0.903056] rk3288-lcdc lcdc1: lcdc1 probe ok, iommu disabled
  312. [ 0.903975] rockchip_set_mux:warning ignore bank num 15
  313. [ 0.904118] rockchip_set_mux:warning ignore bank num 15
  314. [ 0.904244] rockchip_set_mux:warning ignore bank num 15
  315. [ 0.904363] rockchip_set_mux:warning ignore bank num 15
  316. [ 0.904484] rockchip_set_mux:warning ignore bank num 15
  317. [ 0.904601] rockchip_set_mux:warning ignore bank num 15
  318. [ 0.905170] rockchip_set_mux:warning ignore bank num 15
  319. [ 0.905351] rockchip_set_mux:warning ignore bank num 15
  320. [ 0.905914] rockchip_set_mux:warning ignore bank num 15
  321. [ 0.906060] rockchip_set_mux:warning ignore bank num 15
  322. [ 0.906601] rockchip_set_mux:warning ignore bank num 15
  323. [ 0.906753] rockchip_set_mux:warning ignore bank num 15
  324. [ 0.907298] rockchip_set_mux:warning ignore bank num 15
  325. [ 0.907450] rockchip_set_mux:warning ignore bank num 15
  326. [ 0.908006] rockchip_set_mux:warning ignore bank num 15
  327. [ 0.914731] NET: Registered protocol family 2
  328. [ 0.915418] TCP established hash table entries: 4096 (order: 3, 32768 bytes)
  329. [ 0.915502] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
  330. [ 0.915578] TCP: Hash tables configured (established 4096 bind 4096)
  331. [ 0.915645] TCP: reno registered
  332. [ 0.915662] UDP hash table entries: 256 (order: 1, 8192 bytes)
  333. [ 0.915689] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
  334. [ 0.915877] NET: Registered protocol family 1
  335. [ 0.916389] of_get_named_gpio_flags exited with status 8
  336. [ 0.936549] rk818-battery rk818-battery: v=4094, ov=3873, rv=0, c=-27, pwroff_min=0
  337. [ 0.940650] rk818-battery rk818-battery: loader charged
  338. [ 0.940668] rk818-battery rk818-battery: reg soc=100, init soc = 100, init cap=8401
  339. [ 0.966859] rk818-battery rk818-battery: battery driver version 4.0.0
  340. [ 0.967349] Unpacking initramfs...
  341. [ 0.996399] Freeing initrd memory: 620K (c5bf0000 - c5c8b000)
  342. [ 0.997269] hw perfevents: enabled with ARMv7 Cortex-A12 PMU driver, 7 counters available
  343. [ 0.997848] vcodec_service: probe device ff9a0000.vpu_service
  344. [ 0.998044] vcodec_service: No reset resource define
  345. [ 0.998203] vcodec_service: ff9a0000.vpu_service: power on
  346. [ 0.998291] vcodec_service: probe device ff9a0000.vpu_service
  347. [ 0.998309] vcodec_service: checking hw id 4831
  348. [ 0.998750] vcodec_service: ff9a0000.vpu_service: power off...
  349. [ 0.998797] vcodec_service: done
  350. [ 0.998807] vcodec_service: init success
  351. [ 0.998871] vcodec_service: probe device ff9c0000.hevc_service
  352. [ 0.999202] vcodec_service: ff9c0000.hevc_service: power on
  353. [ 0.999260] vcodec_service: probe device ff9c0000.hevc_service
  354. [ 0.999276] vcodec_service: checking hw id 6867
  355. [ 0.999519] vcodec_service: ff9c0000.hevc_service: power off...
  356. [ 0.999560] vcodec_service: done
  357. [ 0.999570] vcodec_service: init success
  358. [ 0.999710] rknandbase v1.0 2014-03-31
  359. [ 0.999953] rknand_probe clk rate = 148500000
  360. [ 1.000018] rknand ff400000.nandc0: can't request region for resource [mem 0xff400000-0xff403fff]
  361. [ 1.000034] rknand ff400000.nandc0: no reg resource?
  362. [ 1.000054] rknand: probe of ff400000.nandc0 failed with error -1
  363. [ 1.000177] rknand_driver:ret = 0
  364. [ 1.003387] bounce pool size: 64 pages
  365. [ 1.007989] fuse init (API version 7.22)
  366. [ 1.008347] msgmni has been set to 953
  367. [ 1.009810] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
  368. [ 1.009831] io scheduler noop registered
  369. [ 1.009843] io scheduler deadline registered
  370. [ 1.009932] io scheduler cfq registered (default)
  371. [ 1.010752] of_get_named_gpio_flags exited with status 226
  372. [ 1.011693] rockchip-hdmiv2 ff980000.hdmi: rockchip hdmiv2 probe sucess.
  373. [ 1.012408] IEP Driver loaded succesfully
  374. [ 1.012504] Module initialized.
  375. [ 1.013457] dma-pl330 ffb20000.pdma: Loaded driver for PL330 DMAC-2364208
  376. [ 1.013478] dma-pl330 ffb20000.pdma: DBUFF-64x8bytes0
  377. [ 1.014811] dma-pl330 ff250000.pdma: Loaded driver for PL330 DMAC-2364208
  378. [ 1.014832] dma-pl330 ff250000.pdma: DBUFF-128x8byte6
  379. [ 1.015201] vdd_logic: 925 <--> 1400 mV at 1000 mV
  380. [ 1.015278] vdd_logic: Failed to create debugfs directory
  381. [ 1.015550] rk_serial.c v1.8 2014-03-04
  382. [ 1.015786] ff180000.serial: ttyS0 at MMIO 0xff180000 (irq = 87) is a rk29_serial.0
  383. [ 1.015974] serial ff180000.serial: membase e359c000
  384. [ 1.016135] ff190000.serial: ttyS1 at MMIO 0xff190000 (irq = 88) is a rk29_serial.1
  385. [ 1.016319] serial ff190000.serial: membase e359e000
  386. [ 1.019113] loop: module loaded
  387. [ 1.019459] zram: Created 1 device(s) ...
  388. [ 1.019548] i2c-core: driver [mpu6050B1] using legacy suspend method
  389. [ 1.019561] i2c-core: driver [mpu6050B1] using legacy resume method
  390. [ 1.019579] mpu_init: Probe name mpu6050B1
  391. [ 1.019756] ak8963_mod 1-000d: get compass-bus error
  392. [ 1.019769] parse ak8963 dts failed
  393. [ 1.019783] i2c i2c-1: ak8963_mod_probe: ak8963
  394. [ 1.019792] yemk:ak8963_mod_probe
  395. [ 1.019806] i2c i2c-1: inv_mpu_register_slave: Null mpu_private_data
  396. [ 1.019818] invensense: in ak8963_mod_probe, result is -22
  397. [ 1.019832] i2c i2c-1: Slave registration failed: ak8963, -22
  398. [ 1.019845] i2c i2c-1: ak8963_mod_probe failed -22
  399. [ 1.019864] ak8963_mod: probe of 1-000d failed with error -22
  400. [ 1.019903] ak8963_mod_init: Probe name ak8963_mod
  401. [ 1.020533] of_get_named_gpio_flags exited with status 235
  402. [ 2.016537] bp_probe:bp_id=16
  403. [ 2.016567] <-----sim7100e power on-------->
  404. [ 2.512426] bp_probe:init success
  405. [ 2.513156] SCSI Media Changer driver v0.25
  406. [ 2.513425] dws->regs: e35be000
  407. [ 2.514335] rockchip_spi_probe:num_cs=2,bus_num=0,irq=76,freq=45692308 ok
  408. [ 2.514466] rk32_iomux_bit_op:GPIO7-13,reg=0x70,data=0xc000800,result=0xaa00
  409. [ 2.514483] _rockchip_pinconf_set:GPIO7-13,group=spi1-cs0, function=gpio7_spi1, type=3
  410. [ 2.514497] rk3288_calc_drv_reg_and_bit:GPIO7-13, drv_reg=0x74, bit=10
  411. [ 2.514511] _rockchip_pinconf_set:GPIO-7 13 data=0xc000000,type=3
  412. [ 2.514544] dws->regs: e35e2000
  413. [ 2.515353] rockchip_spi_probe:num_cs=1,bus_num=1,irq=77,freq=45692308 ok
  414. [ 2.515518] dws->regs: e35e4000
  415. [ 2.516230] rockchip_spi_probe:num_cs=2,bus_num=2,irq=78,freq=45692308 ok
  416. [ 2.516519] tun: Universal TUN/TAP device driver, 1.6
  417. [ 2.516533] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
  418. [ 2.516652] vmac_init.
  419. [ 2.517021] PPP generic driver version 2.4.2
  420. [ 2.517153] PPP BSD Compression module registered
  421. [ 2.517165] PPP Deflate Compression module registered
  422. [ 2.517190] PPP MPPE Compression module registered
  423. [ 2.517203] NET: Registered protocol family 24
  424. [ 2.517240] SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation enabled).
  425. [ 2.517252] CSLIP: code copyright 1989 Regents of the University of California.
  426. [ 2.517265] Rockchip WiFi SYS interface (V1.00) ...
  427. [ 2.517300] esp_mem_init enter date Jan 23 2017 13:27:30
  428. [ 2.517311] esp_mem_init VERSION [V2.5]
  429. [ 2.517360] esp_mem_init complete
  430. [ 2.517445] usbcore: registered new interface driver catc
  431. [ 2.517493] usbcore: registered new interface driver kaweth
  432. [ 2.517506] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver
  433. [ 2.517547] usbcore: registered new interface driver pegasus
  434. [ 2.517588] usbcore: registered new interface driver rtl8150
  435. [ 2.517629] usbcore: registered new interface driver r8152
  436. [ 2.517640] hso: drivers/net/usb/hso.c: Option Wireless
  437. [ 2.517707] usbcore: registered new interface driver hso
  438. [ 2.517751] usbcore: registered new interface driver asix
  439. [ 2.517795] usbcore: registered new interface driver ax88179_178a
  440. [ 2.517837] usbcore: registered new interface driver cdc_ether
  441. [ 2.517879] usbcore: registered new interface driver cdc_eem
  442. [ 2.517918] usbcore: registered new interface driver dm9601
  443. [ 2.517956] usbcore: registered new interface driver dm9620
  444. [ 2.518003] usbcore: registered new interface driver smsc75xx
  445. [ 2.518054] usbcore: registered new interface driver smsc95xx
  446. [ 2.518095] usbcore: registered new interface driver gl620a
  447. [ 2.518140] usbcore: registered new interface driver net1080
  448. [ 2.518179] usbcore: registered new interface driver plusb
  449. [ 2.518221] usbcore: registered new interface driver rndis_host
  450. [ 2.518261] usbcore: registered new interface driver cdc_subset
  451. [ 2.518299] usbcore: registered new interface driver zaurus
  452. [ 2.518348] usbcore: registered new interface driver MOSCHIP usb-ethernet driver
  453. [ 2.518441] usbcore: registered new interface driver int51x1
  454. [ 2.518484] usbcore: registered new interface driver kalmia
  455. [ 2.518525] usbcore: registered new interface driver ipheth
  456. [ 2.518568] usbcore: registered new interface driver sierra_net
  457. [ 2.518608] usbcore: registered new interface driver cx82310_eth
  458. [ 2.518656] usbcore: registered new interface driver cdc_ncm
  459. [ 2.518697] usbcore: registered new interface driver qmi_wwan
  460. [ 2.518743] usbcore: registered new interface driver cdc_mbim
  461. [ 2.518756] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  462. [ 2.521193] EHCI: ehci_rk_probe e3600000 e3600010
  463. [ 2.521213] rockchip_ehci_host ff500000.usb: EHCI Host Controller
  464. [ 2.521244] rockchip_ehci_host ff500000.usb: new USB bus registered, assigned bus number 1
  465. [ 2.521557] rockchip_ehci_host ff500000.usb: irq 56, io mem 0xff500000
  466. [ 2.531785] rockchip_ehci_host ff500000.usb: USB 2.0 started, EHCI 1.00
  467. [ 2.531868] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  468. [ 2.531885] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  469. [ 2.531900] usb usb1: Product: EHCI Host Controller
  470. [ 2.531914] usb usb1: Manufacturer: Linux 3.10.0 ehci_hcd
  471. [ 2.531927] usb usb1: SerialNumber: ff500000.usb
  472. [ 2.532365] hub 1-0:1.0: USB hub found
  473. [ 2.532390] hub 1-0:1.0: 1 port detected
  474. [ 2.532585] EHCI: ehci_rk_probe ok
  475. [ 2.532699] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  476. [ 2.532917] usbcore: registered new interface driver cdc_acm
  477. [ 2.532929] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
  478. [ 2.532984] usbcore: registered new interface driver usblp
  479. [ 2.533028] usbcore: registered new interface driver cdc_wdm
  480. [ 2.533117] usbcore: registered new interface driver usb-storage
  481. [ 2.533165] usbcore: registered new interface driver ums-alauda
  482. [ 2.533206] usbcore: registered new interface driver ums-cypress
  483. [ 2.533246] usbcore: registered new interface driver ums-datafab
  484. [ 2.533285] usbcore: registered new interface driver ums_eneub6250
  485. [ 2.533324] usbcore: registered new interface driver ums-freecom
  486. [ 2.533364] usbcore: registered new interface driver ums-isd200
  487. [ 2.533402] usbcore: registered new interface driver ums-jumpshot
  488. [ 2.533442] usbcore: registered new interface driver ums-karma
  489. [ 2.533491] usbcore: registered new interface driver ums-onetouch
  490. [ 2.533531] usbcore: registered new interface driver ums-sddr09
  491. [ 2.533571] usbcore: registered new interface driver ums-sddr55
  492. [ 2.533614] usbcore: registered new interface driver ums-usbat
  493. [ 2.533700] usbcore: registered new interface driver usbserial
  494. [ 2.533740] usbcore: registered new interface driver usbserial_generic
  495. [ 2.533772] usbserial: USB Serial support registered for generic
  496. [ 2.533811] usbcore: registered new interface driver option
  497. [ 2.533839] usbserial: USB Serial support registered for GSM modem (1-port)
  498. [ 2.533910] usbcore: registered new interface driver trancevibrator
  499. [ 2.533924] usb20_otg: version 3.10a 21-DEC-2012
  500. [ 2.534359] e3680040
  501. [ 2.534373] Core Release: 3.10a
  502. [ 2.534385] Setting default values for core params
  503. [ 2.534501] Using Buffer DMA mode
  504. [ 2.534513] Periodic Transfer Interrupt Enhancement - disabled
  505. [ 2.534524] Multiprocessor Interrupt Enhancement - disabled
  506. [ 2.534536] OTG VER PARAM: 0, OTG VER FLAG: 0
  507. [ 2.534546] ^^^^^^^^^^^^^^^^^Device Mode
  508. [ 2.534560] Dedicated Tx FIFOs mode
  509. [ 2.534580] pcd_init otg_dev = ddf04180
  510. [ 2.534905] usb20_otg ff580000.usb: DWC OTG Controller
  511. [ 2.534938] usb20_otg ff580000.usb: new USB bus registered, assigned bus number 2
  512. [ 2.534970] usb20_otg ff580000.usb: irq 55, io mem 0x00000000
  513. [ 2.535030] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
  514. [ 2.535047] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  515. [ 2.535061] usb usb2: Product: DWC OTG Controller
  516. [ 2.535074] usb usb2: Manufacturer: Linux 3.10.0 dwc_otg_hcd
  517. [ 2.535087] usb usb2: SerialNumber: ff580000.usb
  518. [ 2.535471] hub 2-0:1.0: USB hub found
  519. [ 2.535497] hub 2-0:1.0: 1 port detected
  520. [ 2.535800] usb20_host: version 3.10a 21-DEC-2012
  521. [ 2.538298] e3700040
  522. [ 2.538312] Core Release: 3.10a
  523. [ 2.538322] Setting default values for core params
  524. [ 2.538431] Using Buffer DMA mode
  525. [ 2.538442] Periodic Transfer Interrupt Enhancement - disabled
  526. [ 2.538454] Multiprocessor Interrupt Enhancement - disabled
  527. [ 2.538465] OTG VER PARAM: 0, OTG VER FLAG: 0
  528. [ 2.538475] ^^^^^^^^^^^^^^^^^^Host Mode
  529. [ 2.538504] usb20_host ff540000.usb: DWC OTG Controller
  530. [ 2.538530] usb20_host ff540000.usb: new USB bus registered, assigned bus number 3
  531. [ 2.538566] usb20_host ff540000.usb: irq 57, io mem 0x00000000
  532. [ 2.538657] Init: Power Port (0)
  533. [ 2.538713] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
  534. [ 2.538731] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  535. [ 2.538745] usb usb3: Product: DWC OTG Controller
  536. [ 2.538758] usb usb3: Manufacturer: Linux 3.10.0 dwc_otg_hcd
  537. [ 2.538771] usb usb3: SerialNumber: ff540000.usb
  538. [ 2.539141] hub 3-0:1.0: USB hub found
  539. [ 2.539164] hub 3-0:1.0: 1 port detected
  540. [ 2.539877] usbcore: registered new interface driver xpad
  541. [ 2.539936] usbcore: registered new interface driver usb_acecad
  542. [ 2.539988] usbcore: registered new interface driver aiptek
  543. [ 2.540033] usbcore: registered new interface driver gtco
  544. [ 2.540079] usbcore: registered new interface driver hanwang
  545. [ 2.540124] usbcore: registered new interface driver kbtab
  546. [ 2.540181] usbcore: registered new interface driver wacom
  547. [ 2.540192] ==gsl_ts_init==
  548. [ 2.540288] GSLX680 Enter gsl_ts_probe
  549. [ 2.540300] ==kzalloc success=
  550. [ 2.540323] of_get_named_gpio_flags exited with status 230
  551. [ 2.540334] of_get_named_gpio_flags exited with status 229
  552. [ 2.540352] [GSLX680] Enter gslX680_ts_init
  553. [ 2.540594] input: gslX680 as /devices/ff160000.i2c/i2c-4/4-0040/input/input0
  554. [ 2.540770] gsl init_chip
  555. [ 2.540781] gsl gslX680_shutdown_low
  556. [ 2.561296] gsl gslX680_shutdown_high
  557. [ 2.591306] gsl I read reg 0xf0 is 0
  558. [ 2.610820] gsl I write reg 0xf0 0x12
  559. [ 2.630281] dwc_otg_hcd_suspend, usb device mode
  560. [ 2.630662] gsl I read reg 0xf0 is 0x12
  561. [ 2.719051] rockchip_i2c ff160000.i2c: Addr[0x0040] irq in STATE_IDLE, ipd = 0x21
  562. [ 2.787614] gsl reset_chip
  563. [ 2.846674] usb 1-1: new high-speed USB device number 2 using rockchip_ehci_host
  564. [ 2.876493] rockchip_i2c ff160000.i2c: Addr[0x0040] irq in STATE_IDLE, ipd = 0x21
  565. [ 2.915534] =============gsl_load_fw start==============
  566. [ 2.994905] usb 1-1: New USB device found, idVendor=1a40, idProduct=0101
  567. [ 2.994924] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
  568. [ 2.994938] usb 1-1: Product: USB 2.0 Hub
  569. [ 2.995381] hub 1-1:1.0: USB hub found
  570. [ 2.995521] hub 1-1:1.0: 4 ports detected
  571. [ 3.497138] =============gsl_load_fw end==============
  572. [ 3.497158] gsl startup_chip
  573. [ 3.515771] gsl reset_chip
  574. [ 3.604646] rockchip_i2c ff160000.i2c: Addr[0x0040] irq in STATE_IDLE, ipd = 0x21
  575. [ 3.643694] gsl startup_chip
  576. [ 3.663374] ------gsl check_mem_data ------
  577. [ 3.703473] #########gsl check mem read 0xb0 = 5a 5a 5a 5a #########
  578. [ 3.703602] gsl_ts_probe () : queue gsl_monitor_workqueue
  579. [ 3.703710] [GSLX680] End gsl_ts_probe
  580. [ 3.703762] ret=0
  581. [ 3.704162] sensor_register_slave:mma8452,id=17
  582. [ 3.704177] sensor_register_slave:lis3dh,id=7
  583. [ 3.704188] sensor_register_slave:mma7660,id=18
  584. [ 3.704199] sensor_register_slave:lsm303d,id=22
  585. [ 3.704210] sensor_register_slave:mpu6880_acc,id=24
  586. [ 3.704221] sensor_register_slave:mpu6500_acc,id=25
  587. [ 3.704233] sensor_register_slave:akm8963,id=28
  588. [ 3.704245] sensor_register_slave:cm3217,id=48
  589. [ 3.704256] sensor_register_slave:cm3218,id=49
  590. [ 3.704267] sensor_register_slave:cm32181,id=50
  591. [ 3.704278] sensor_register_slave:och165t,id=68
  592. [ 3.997946] rtc_hym8563 0-0051: clock/calendar information is no longer guaranteed
  593. [ 4.175065] of_get_named_gpio_flags exited with status 4
  594. [ 4.175147] genirq: Flags mismatch irq 192. 00002002 (rtc_hym8563) vs. 00002002 (rk818)
  595. [ 4.175194] hym8563_probe:fail to request irq = 192, ret = 0xfffffff0
  596. [ 4.352247] i2c /dev entries driver
  597. [ 4.352966] IR NEC protocol handler initialized
  598. [ 4.352980] IR RC5(x) protocol handler initialized
  599. [ 4.352990] IR RC6 protocol handler initialized
  600. [ 4.353001] IR JVC protocol handler initialized
  601. [ 4.353011] IR Sony protocol handler initialized
  602. [ 4.353020] IR RC5 (streamzap) protocol handler initialized
  603. [ 4.353030] IR SANYO protocol handler initialized
  604. [ 4.353040] IR MCE Keyboard/mouse protocol handler initialized
  605. [ 4.353311] usbcore: registered new interface driver uvcvideo
  606. [ 4.353322] USB Video Class driver (1.1.1)
  607. [ 4.353336] CamSys driver version: v0.32.0, CamSys head file version: v0.11.0
  608. [ 4.353905] not find test_power_init dev node
  609. [ 4.411213] The device is not bq27320 -11
  610. [ 4.411244] bq27320: probe of 0-0055 failed with error -11
  611. [ 4.411291] i2c-core: driver [bq27320] using legacy suspend method
  612. [ 4.411303] i2c-core: driver [bq27320] using legacy resume method
  613. [ 4.411663] rockchip_temp_probe,line=362
  614. [ 4.470260] tsadc ff280000.tsadc: initialized
  615. [ 4.470688] device-mapper: uevent: version 1.0.3
  616. [ 4.470939] device-mapper: ioctl: 4.24.0-ioctl (2013-01-15) initialised: dm-devel@redhat.com
  617. [ 4.471223] Bluetooth: HCI UART driver ver 2.2
  618. [ 4.471239] Bluetooth: HCI H4 protocol initialized
  619. [ 4.471249] Bluetooth: HCILL protocol initialized
  620. [ 4.471260] rtk_btusb: Realtek Bluetooth USB driver module init, version 2.21
  621. [ 4.471273] rtk_btusb: Register usb char device interface for BT driver
  622. [ 4.471467] usbcore: registered new interface driver rtk_btusb
  623. [ 4.472077] rockchip_i2c ff650000.i2c: Addr[0x001c] irq in STATE_IDLE, ipd = 0x33
  624. [ 4.474344] cpufreq version 1.0, suspend freq 1200 MHz
  625. [ 4.474540] cpuidle: using governor ladder
  626. [ 4.474554] cpuidle: using governor menu
  627. [ 4.474596] Synopsys Designware Multimedia Card Interface Driver
  628. [ 4.474609] MHSC version = Ver 2.00 2015-06-10
  629. [ 4.475109] dw cru_regsbase addr 0x1d8.
  630. [ 4.475121] dw cru_reset_offset val 0.
  631. [ 4.475137] dwmmc_rockchip ff0c0000.rksdmmc: Version ID is 270a
  632. [ 4.475197] dwmmc_rockchip ff0c0000.rksdmmc: failed to get hpclk_mmc
  633. [ 4.475510] dwmmc_rockchip ff0c0000.rksdmmc: Using internal DMA controller.
  634. [ 4.475700] dw_mci_init_slot: fmin=400000, fmax=50000000 [mmc0]
  635. [ 4.475732] of_get_named_gpio_flags: can't parse gpios property
  636. [ 4.475789] mmc0: no vmmc regulator found
  637. [ 4.475920] dwmmc_rockchip ff0c0000.rksdmmc: mmc0: No udbg pinctrl found!
  638. [ 4.476018] 1358..dw_mci_set_ios: no card. [mmc0]
  639. [ 4.489952] 1358..dw_mci_set_ios: no card. [mmc0]
  640. [ 4.509660] 1358..dw_mci_set_ios: no card. [mmc0]
  641. [ 4.510706] dwmmc_rockchip ff0c0000.rksdmmc: DW MMC controller at irq 64, 32 bit host data width, 256 deep fifo
  642. [ 4.510724] dwmmc_rockchip ff0c0000.rksdmmc: 1 slots initialized
  643. [ 4.511126] dw cru_regsbase addr 0x1d8.
  644. [ 4.511153] dw cru_reset_offset val 1.
  645. [ 4.511178] dwmmc_rockchip ff0d0000.rksdmmc: Version ID is 270a
  646. [ 4.511210] dwmmc_rockchip ff0d0000.rksdmmc: failed to get hpclk_mmc
  647. [ 4.514612] EHCI: rk_ehci_hcd_enable, enable host controller
  648. [ 4.514688] dwmmc_rockchip ff0d0000.rksdmmc: Using internal DMA controller.
  649. [ 4.514805] dw_mci_init_slot: fmin=200000, fmax=50000000 [mmc1]
  650. [ 4.514824] of_get_named_gpio_flags: can't parse gpios property
  651. [ 4.515047] 1358..dw_mci_set_ios: no card. [mmc1]
  652. [ 4.529317] 1358..dw_mci_set_ios: no card. [mmc1]
  653. [ 4.548998] 1358..dw_mci_set_ios: no card. [mmc1]
  654. [ 4.549028] dwmmc_rockchip ff0d0000.rksdmmc: DW MMC controller at irq 65, 32 bit host data width, 256 deep fifo
  655. [ 4.549042] dwmmc_rockchip ff0d0000.rksdmmc: 1 slots initialized
  656. [ 4.549304] hidraw: raw HID events driver (C) Jiri Kosina
  657. [ 4.550709] usbcore: registered new interface driver usbhid
  658. [ 4.550720] usbhid: USB HID core driver
  659. [ 4.550827] ashmem: initialized
  660. [ 4.550943] logger: created 256K log 'log_main'
  661. [ 4.551032] logger: created 256K log 'log_events'
  662. [ 4.551123] logger: created 256K log 'log_radio'
  663. [ 4.551216] logger: created 256K log 'log_system'
  664. [ 4.552211] of_get_named_gpio_flags exited with status 5
  665. [ 4.552221] of_get_named_gpio_flags exited with status 5
  666. [ 4.552464] input: rk29-keypad as /devices/ff100000.adc/key.39/input/input1
  667. [ 4.553298] rockchip-pinctrl ff770000.pinctrl: pin gpio6-8 already requested by ff890000.rockchip-i2s; cannot claim for 2-0010
  668. [ 4.553314] rockchip-pinctrl ff770000.pinctrl: pin-200 (2-0010) status -22
  669. [ 4.553325] rockchip-pinctrl ff770000.pinctrl: could not request pin 200 on device rockchip-pinctrl
  670. [ 4.553337] ES8323 2-0010: Error applying setting, reverse things back
  671. [ 4.553612] of_get_named_gpio_flags exited with status 239
  672. [ 4.553643] of_get_named_gpio_flags exited with status 11
  673. [ 4.553657] of_get_named_gpio_flags exited with status 231
  674. [ 4.553783] es8323_i2c_probe:register ISR (irq=203)
  675. [ 4.554455] rockchip-spdif ff8b0000.rockchip-spdif: spdif ready.
  676. [ 4.554795] es8323_probe
  677. [ 5.318795] rockchip-es8323 rockchip-es8323.35: ES8323 HiFi <-> ff890000.rockchip-i2s mapping ok
  678. [ 5.330164] rockchip-hdmi-i2s rockchip-hdmi-i2s.33: rk-hdmi-i2s-hifi <-> ff890000.rockchip-i2s mapping ok
  679. [ 5.330917] u32 classifier
  680. [ 5.330933] Actions configured
  681. [ 5.330954] Netfilter messages via NETLINK v0.30.
  682. [ 5.331035] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
  683. [ 5.331621] ctnetlink v0.93: registering with nfnetlink.
  684. [ 5.331716] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
  685. [ 5.331733] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
  686. [ 5.332177] xt_time: kernel timezone is -0000
  687. [ 5.332553] ip_tables: (C) 2000-2006 Netfilter Core Team
  688. [ 5.332788] arp_tables: (C) 2002 David S. Miller
  689. [ 5.332852] TCP: cubic registered
  690. [ 5.332865] Initializing XFRM netlink socket
  691. [ 5.333280] NET: Registered protocol family 10
  692. [ 5.334087] mip6: Mobile IPv6
  693. [ 5.334136] ip6_tables: (C) 2000-2006 Netfilter Core Team
  694. [ 5.334344] sit: IPv6 over IPv4 tunneling driver
  695. [ 5.334915] NET: Registered protocol family 17
  696. [ 5.334961] NET: Registered protocol family 15
  697. [ 5.335052] Bridge firewalling registered
  698. [ 5.335075] Ebtables v2.0 registered
  699. [ 5.335298] Bluetooth: RFCOMM TTY layer initialized
  700. [ 5.335340] Bluetooth: RFCOMM socket layer initialized
  701. [ 5.335356] Bluetooth: RFCOMM ver 1.11
  702. [ 5.335371] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
  703. [ 5.335386] Bluetooth: BNEP filters: protocol multicast
  704. [ 5.335408] Bluetooth: BNEP socket layer initialized
  705. [ 5.335423] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
  706. [ 5.335445] Bluetooth: HIDP socket layer initialized
  707. [ 5.335487] l2tp_core: L2TP core driver, V2.0
  708. [ 5.335513] l2tp_ppp: PPPoL2TP kernel driver, V2.0
  709. [ 5.335528] [WLAN_RFKILL]: Enter rfkill_wlan_init
  710. [ 5.335830] [WLAN_RFKILL]: Enter rfkill_wlan_probe
  711. [ 5.335851] [WLAN_RFKILL]: can't find rockchip,grf property
  712. [ 5.335868] [WLAN_RFKILL]: wlan_platdata_parse_dt: wifi_chip_type = bcmwifi
  713. [ 5.335885] [WLAN_RFKILL]: wlan_platdata_parse_dt: enable wifi power control.
  714. [ 5.335902] [WLAN_RFKILL]: wlan_platdata_parse_dt: disable wifi io reference voltage control.
  715. [ 5.335920] [WLAN_RFKILL]: wlan_platdata_parse_dt: wifi power controled by gpio.
  716. [ 5.335946] of_get_named_gpio_flags exited with status 156
  717. [ 5.335959] [WLAN_RFKILL]: wlan_platdata_parse_dt: get property: WIFI,poweren_gpio = 156, flags = 0.
  718. [ 5.335975] of_get_named_gpio_flags: can't parse gpios property
  719. [ 5.335990] of_get_named_gpio_flags exited with status 158
  720. [ 5.336003] [WLAN_RFKILL]: wlan_platdata_parse_dt: get property: WIFI,host_wake_irq = 158, flags = 0.
  721. [ 5.336020] [WLAN_RFKILL]: rfkill_wlan_probe: init gpio
  722. [ 5.336060] [WLAN_RFKILL]: rockchip_wifi_voltage_select: wifi & sdio reference voltage: 1.8V
  723. [ 5.336078] [WLAN_RFKILL]: Exit rfkill_wlan_probe
  724. [ 5.336248] [BT_RFKILL]: Enter rfkill_rk_init
  725. [ 5.336501] of_get_named_gpio_flags exited with status 147
  726. [ 5.336516] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: uart_rts_gpios = 147.
  727. [ 5.336536] of_get_named_gpio_flags: can't parse gpios property
  728. [ 5.336551] of_get_named_gpio_flags exited with status 157
  729. [ 5.336563] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,reset_gpio = 157.
  730. [ 5.336581] of_get_named_gpio_flags exited with status 154
  731. [ 5.336593] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,wake_gpio = 154.
  732. [ 5.336611] of_get_named_gpio_flags exited with status 159
  733. [ 5.336623] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,wake_host_irq = 159.
  734. [ 5.336699] [BT_RFKILL]: Request irq for bt wakeup host
  735. [ 5.336847] [BT_RFKILL]: ** disable irq
  736. [ 5.336990] [BT_RFKILL]: ap6335 device registered.
  737. [ 5.337059] sensor_register_slave:mpu6880_gyro,id=46
  738. [ 5.337321] rk_cam_cif(3053):rk312x-camera version: v0.2.0 Zoom by ipp
  739. [ 5.338092] of_get_named_gpio_flags exited with status 17
  740. [ 5.338129] of_get_named_gpio_flags exited with status 78
  741. [ 5.338152] of_get_named_gpio_flags exited with status 77
  742. [ 5.338178] of_get_named_gpio_flags exited with status 238
  743. [ 5.338198] of_get_named_gpio_flags exited with status 17
  744. [ 5.338211] _gpio_request: gpio-17 (camera power) status -16
  745. [ 5.338231] of_get_named_gpio_flags exited with status 78
  746. [ 5.338242] _gpio_request: gpio-78 (camera reset) status -16
  747. [ 5.338260] of_get_named_gpio_flags exited with status 77
  748. [ 5.338271] _gpio_request: gpio-77 (camera powerdown) status -16
  749. [ 5.338290] of_get_named_gpio_flags exited with status 238
  750. [ 5.338301] _gpio_request: gpio-238 (camera af) status -16
  751. [ 5.338315] of_get_named_gpio_flags exited with status 17
  752. [ 5.338328] _gpio_request: gpio-17 (camera power) status -16
  753. [ 5.338346] of_get_named_gpio_flags exited with status 78
  754. [ 5.338358] _gpio_request: gpio-78 (camera reset) status -16
  755. [ 5.338375] of_get_named_gpio_flags exited with status 76
  756. [ 5.338635] soc-camera-pdrv ov5640_back_3: Probing ov5640_back_3
  757. [ 5.338722] rk3288_init_suspend
  758. [ 5.338741] rk3288_suspend_init enter
  759. [ 5.338951] rk3288_suspend_init: pm_ctrbits =200007
  760. [ 5.339008] gpio_get_dts_info suspend:4
  761. [ 5.339022] gpio_get_dts_info resume:4
  762. [ 5.339034] rockchip,pmic-suspend_gpios:14007a10 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
  763. [ 5.339099] rockchip,pmic-resume_gpios:2007a11 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
  764. [ 5.339389] clks_gating_suspend_init:clkgt info ok
  765. [ 5.339556] Registering SWP/SWPB emulation handler
  766. [ 5.339579] rockchip_uboot_mem_late_init: Freeing uboot logo memory: 0x02000000@0x7dc00000
  767. [ 5.345823] ddrfreq: verion 1.2 20140526
  768. [ 5.345850] ddrfreq: normal 396MHz video_1080p 396MHz video_4k 396MHz dualview 396MHz idle 0MHz suspend 200MHz reboot 396MHz
  769. [ 5.345867] ddrfreq: auto-freq=0
  770. [ 5.345880] ddrfreq: auto-freq-table[0] 240MHz
  771. [ 5.345893] ddrfreq: auto-freq-table[1] 324MHz
  772. [ 5.345906] ddrfreq: auto-freq-table[2] 396MHz
  773. [ 5.345919] ddrfreq: auto-freq-table[3] 528MHz
  774. [ 5.355912] ret: 0
  775. [ 5.359134] regulator-dummy: disabling
  776. [ 5.359271] =======================================================
  777. [ 5.359286] ==== Launching Wi-Fi driver! (Powered by Rockchip) ====
  778. [ 5.359296] =======================================================
  779. [ 5.359307] WiFi driver (Powered by Rockchip,Ver 5.10.WFD.OOB.64bit) init.
  780. [ 5.359408] dhd_module_init: in
  781. [ 5.359423] ======== bcm_wlan_set_plat_data ========
  782. [ 5.359434] [WLAN_RFKILL]: rockchip_wifi_get_oob_irq: Enter
  783. [ 5.359466] host_oob_irq: 205
  784. [ 5.359475] host_oob_irq_flags=4
  785. [ 5.359484] dhd_wifi_platform_load: Enter
  786. [ 5.359496] pcd_pullup, is_on 0
  787. [ 5.359506] Power-up adapter 'DHD generic adapter'
  788. [ 5.359537] wifi_platform_set_power = 1
  789. [ 5.359547] ======== PULL WL_REG_ON HIGH! ========
  790. [ 5.359557] [WLAN_RFKILL]: rockchip_wifi_power: 1
  791. [ 5.359564] file system registered
  792. [ 5.359575] [WLAN_RFKILL]: rockchip_wifi_ref_voltage: 1
  793. [ 5.359586] [WLAN_RFKILL]: rockchip_wifi_ref_voltage: wifi io reference voltage control is disabled.
  794. [ 5.360509] android_usb gadget: Mass Storage Function, version: 2009/09/11
  795. [ 5.360525] android_usb gadget: Number of LUNs=2
  796. [ 5.360538] lun0: LUN: removable file: (no medium)
  797. [ 5.360549] lun1: LUN: removable file: (no medium)
  798. [ 5.360796] android_usb gadget: android_usb ready
  799. [ 5.360966] i2c i2c-1: sensor_probe: ak8963,debed600
  800. [ 5.360988] of_get_named_gpio_flags exited with status 257
  801. [ 5.360997] of_get_named_gpio_flags: can't parse gpios property
  802. [ 5.361005] of_get_named_gpio_flags: can't parse gpios property
  803. [ 5.361280] sensor_chip_init:ak8963:devid=0x48,ops=0xc0ca05fc
  804. [ 5.361960] input: compass as /devices/ff140000.i2c/i2c-1/1-000d/input/input2
  805. [ 5.362371] sensor_misc_device_register:miscdevice: compass
  806. [ 5.362387] sensor_probe:initialized ok,sensor name:akm8963,type:3,id=28
  807.  
  808. [ 5.362470] i2c i2c-1: sensor_probe: light_cm32181,debed800
  809. [ 5.362490] of_get_named_gpio_flags exited with status 259
  810. [ 5.362499] of_get_named_gpio_flags: can't parse gpios property
  811. [ 5.362507] of_get_named_gpio_flags: can't parse gpios property
  812. [ 5.362521] sensor_chip_init:light_cm32181:devid=0x0,ops=0xc0ca0800
  813. [ 5.363082] input: lightsensor-level as /devices/ff140000.i2c/i2c-1/1-0010/input/input3
  814. [ 5.363301] sensor_misc_device_register:miscdevice: lightsensor
  815. [ 5.363316] sensor_probe:initialized ok,sensor name:cm32181,type:5,id=50
  816.  
  817. [ 5.363398] i2c i2c-1: sensor_probe: mpu6500_acc,debeda00
  818. [ 5.363414] of_get_named_gpio_flags: can't parse gpios property
  819. [ 5.363423] of_get_named_gpio_flags: can't parse gpios property
  820. [ 5.363431] of_get_named_gpio_flags: can't parse gpios property
  821. [ 5.363701] sensor_chip_init:mpu6500_acc:devid=0x70,ops=0xc0ca05a0
  822. [ 5.395823] min_w = 800,min_h = 600 ,max_real_w = 2592,max_real_h = 1944,max_w = 2592,max_h =1944
  823. [ 5.454266] ov5640_back_3(rk_cam_sensor:167): write reg(0x3008, val:0x80) failed, try to write again!
  824. [ 5.464095] [WLAN_RFKILL]: wifi turn on power. 156
  825. [ 5.513307] ov5640_back_3(rk_cam_sensor:167): write reg(0x3008, val:0x80) failed, try to write again!
  826. [ 5.542879] input: gsensor as /devices/ff140000.i2c/i2c-1/1-0068/input/input4
  827. [ 5.543023] sensor_misc_device_register:miscdevice: mma8452_daemon
  828. [ 5.543033] sensor_probe:initialized ok,sensor name:mpu6500_acc,type:2,id=25
  829.  
  830. [ 5.543089] i2c i2c-1: sensor_probe: mpu6880_gyro,debedc00
  831. [ 5.543099] of_get_named_gpio_flags: can't parse gpios property
  832. [ 5.543104] of_get_named_gpio_flags: can't parse gpios property
  833. [ 5.543108] of_get_named_gpio_flags: can't parse gpios property
  834. [ 5.543116] sensor_chip_init:mpu6880_gyro:devid=0x0,ops=0xc0ca06ec
  835. [ 5.543599] input: gyro as /devices/ff140000.i2c/i2c-1/1-0068-1/input/input5
  836. [ 5.543718] sensor_misc_device_register:miscdevice: gyrosensor
  837. [ 5.543726] sensor_probe:initialized ok,sensor name:mpu6880_gyro,type:4,id=46
  838.  
  839. [ 5.543769] sensor_init: Probe name sensors
  840. [ 5.543786] sensor-dev.c v1.4 add angle calculation support between two gsensors 2013-09-01
  841. [ 5.545965] rk818-rtc rk818-rtc: setting system clock to 2017-01-25 11:46:25 UTC (1485344785)
  842. [ 5.550032] of_get_named_gpio_flags: can't parse gpios property
  843. [ 5.550041] rockchip_headset_probe() Can not read property headset_gpio
  844. [ 5.550054] rockchip_headset: probe of rockchip_headset.38 failed with error -2
  845. [ 5.550522] usbcore: registered new interface driver snd-usb-audio
  846. [ 5.550530] ALSA device list:
  847. [ 5.550535] #0: RK_ES8323
  848. [ 5.550540] #1: RK-HDMI-I2S
  849. [ 5.550803] Freeing unused kernel memory: 356K (c0ba2000 - c0bfb000)
  850. [ 5.565161] rk30xxnand_ko: module license '' taints kernel.
  851. [ 5.565175] Disabling lock debugging due to kernel taint
  852. [ 5.565976] rknand_init:
  853. [ 5.566023] No.1 FLASH ID:45 de 94 93 76 50
  854. [ 5.567327] ECC:60
  855. [ 5.567335] FTL version: 5.0.27 20150815
  856. [ 5.572356] ov5640_back_3(rk_cam_sensor:167): write reg(0x3008, val:0x80) failed, try to write again!
  857. [ 5.572377] ov5640_back_3(rk_cam_sensor:385): write array failed!
  858. [ 5.572384] ov5640_back_3(rk_cam_sensor:669): soft reset failed
  859.  
  860. [ 5.651056] ov5640_back_3(rk_cam_sensor:333): read reg(0x300a val:0x0) failed, try to read again!
  861. [ 5.651075] ov5640_back_3(rk_cam_sensor:697): read chip id failed
  862. [ 5.651172] ret: 0
  863. [ 5.670740] wifi_platform_bus_enumerate device present 1
  864. [ 5.670747] ======== Card detection to detect SDIO card! ========
  865. [ 5.670754] mmc1:mmc host rescan start!
  866. [ 5.680587] soc-camera-pdrv s5k4ec_back_4: Probing s5k4ec_back_4
  867. [ 5.700251] ret: 0
  868. [ 5.740450] min_w = 800,min_h = 600 ,max_real_w = 2592,max_real_h = 1944,max_w = 2592,max_h =1944
  869. [ 5.760957] soc-camera-pdrv gc2145_front_5: Probing gc2145_front_5
  870. [ 5.778972] ret: 0
  871. [ 5.792693] FtlInit 0
  872. [ 5.792839] nand part : offset
  873. [ 5.792847] rknand_uboot : 2000 - )
  874. [ 5.793037] rknand_misc : 4000 - )
  875. [ 5.793148] rknand_resource : 6000 - )
  876. [ 5.793251] rknand_kernel : e000 - )
  877. [ 5.793354] rknand_boot : 16000 - )
  878. [ 5.793454] rknand_recovery : 26000 - )
  879. [ 5.793555] rknand_backup : 36000 - )
  880. [ 5.793672] rknand_cache : 50000 - )
  881. [ 5.793776] rknand_kpanic : 90000 - )
  882. [ 5.793881] rknand_system : 92000 - )
  883. [ 5.793991] rknand_metadata : 392000 - )
  884. [ 5.794097] rknand_userdata : 39a000 - )
  885. [ 5.794204] rknand_radical_update : 59a000 - )
  886. [ 5.794312] rknand_user : 5ba000 - )
  887. [ 5.795814] init_nand_blk_dev:ret = 0
  888. [ 5.819069] min_w = 800,min_h = 600 ,max_real_w = 1600,max_real_h = 1200,max_w = 1600,max_h =1200
  889. [ 5.887225] rk_sdmmc: BOOT dw_mci_setup_bus: argue clk_mmc workaround out 800000Hz for init[mmc1]
  890. [ 5.894252] rk818-battery rk818-battery: changed: dsoc=100, rsoc=100
  891. [ 5.921836] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
  892. [ 5.923337] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
  893. [ 5.924840] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
  894. [ 5.927533] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
  895. [ 6.012055] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0)
  896. [ 6.012076] rk_sdmmc: BOOT dw_mci_setup_bus: argue clk_mmc workaround out normal clock [mmc1]
  897. [ 6.012120] rk_sdmmc: BOOT Bus speed=50000000Hz,Bus width=4bits.[mmc1]
  898. [ 6.013402] mmc1: new high speed SDIO card at address 0001
  899. [ 6.029888] bcmsdh_register: register client driver
  900. [ 6.029955] bcmsdh_sdmmc: bcmsdh_sdmmc_probe Enter
  901. [ 6.030010] bcmsdh_sdmmc: bcmsdh_sdmmc_probe Enter
  902. [ 6.030018] bus num (host idx)=1, slot num (rca)=1
  903. [ 6.030024] found adapter info 'DHD generic adapter'
  904. [ 6.030237] F1 signature read @0x18000000=0x1540a9a6
  905. [ 6.031616] F1 signature OK, socitype:0x1 chip:0xa9a6 rev:0x0 pkg:0x4
  906. [ 6.032086] DHD: dongle ram size is set to 524288(orig 524288) at 0x0
  907. [ 6.032153] wifi_platform_get_mac_addr
  908. [ 6.032159] ======== bcm_wlan_get_mac_address ========
  909. [ 6.032164] [WLAN_RFKILL]: rockchip_wifi_mac_addr: enter.
  910. [ 6.032179] [WLAN_RFKILL]: falsh wifi_custom_mac_addr=[00:00:00:00:00:00]
  911. [ 6.032184] [WLAN_RFKILL]: This mac address is not valid, ignored...
  912. [ 6.032192] dhd_conf_set_chiprev: chip=0xa9a6, chiprev=0
  913. [ 6.032226] dhd_conf_set_conf_path_by_nv_path: config_path=/system/etc/firmware/config.txt
  914. [ 6.032656] wl_create_event_handler(): thread:wl_event_handler:af started
  915. [ 6.032737] tsk Enter, tsk = 0xc5ac149c
  916. [ 6.032895] dhd_attach(): thread:dhd_watchdog_thread:b1 started
  917. [ 6.032929] dhd_attach(): thread:dhd_dpc:b2 started
  918. [ 6.032938] dhd_dpc_thread: set dpc_cpucore 0 from config.txt
  919. [ 6.032966] dhd_attach(): thread:dhd_rxf:b3 started
  920. [ 6.032975] dhd_deferred_work_init: work queue initialized
  921. [ 6.033091] dhdsdio_probe_init: set use_rxchain 0 from config.txt
  922. [ 6.037948] Dongle Host Driver, version 1.201.59.5 (r506368)
  923. Compiled in drivers/net/wireless/bcmdhd on Jan 23 2017 at 13:27:37
  924. [ 6.038542] Register interface [wlan0] MAC: e0:76:d0:e2:e1:62
  925.  
  926. [ 6.038554] dhd_prot_ioctl : bus is down. we have nothing to do
  927. [ 6.038588] bcmsdh_oob_intr_unregister: Enter
  928. [ 6.038595] bcmsdh_oob_intr_unregister: irq is not registered
  929. [ 6.038604] dhd_txglom_enable: enable 0
  930. [ 6.038609] dhd_bus_devreset: WLAN OFF DONE
  931. [ 6.038639] wifi_platform_set_power = 0
  932. [ 6.038645] ======== PULL WL_REG_ON LOW! ========
  933. [ 6.038651] [WLAN_RFKILL]: rockchip_wifi_power: 0
  934. [ 6.143051] [WLAN_RFKILL]: wifi shut off power.
  935. [ 6.143059] [WLAN_RFKILL]: rockchip_wifi_ref_voltage: 0
  936. [ 6.143065] [WLAN_RFKILL]: rockchip_wifi_ref_voltage: wifi io reference voltage control is disabled.
  937. [ 6.143217] dhd_module_init: Exit err=0
  938. [ 6.878456] rk818-battery rk818-battery: changed: dsoc=100, rsoc=100
  939. [ 6.882783] rk818-battery rk818-battery: set charge to digital termination mode
  940. [ 8.070727] EXT3-fs (rknand_userdata): error: couldn't mount because of unsupported optional features (40)
  941. [ 8.072736] EXT2-fs (rknand_userdata): error: couldn't mount because of unsupported optional features (40)
  942. [ 8.083541] EXT4-fs (rknand_userdata): mounted filesystem with ordered data mode. Opts: (null)
  943. [ 8.123132] lun0: unable to open backing file: /dev/mmcblk0
  944. [ 8.123601] android_usb: already disabled
  945. [ 8.123828] pcd_pullup, is_on 1
  946. [ 8.618884] pcd_pullup, is_on 0
  947. [ 8.619062] WARN::ep_dequeue:423: bogus device state
  948.  
  949. [ 8.626790] rndis_function_bind_config MAC: 00:00:00:00:00:00
  950. [ 8.627059] android_usb gadget: using random self ethernet address
  951. [ 8.627177] android_usb gadget: using random host ethernet address
  952. [ 8.633433] rndis0: MAC f6:80:63:8f:e0:f0
  953. [ 8.633455] rndis0: HOST MAC 22:60:ca:2e:20:ae
  954. [ 8.633523] pcd_pullup, is_on 1
  955. [ 8.635358] IPv6: ADDRCONF(NETDEV_UP): rndis0: link is not ready
  956. [ 9.683404] pcd_pullup, is_on 0
  957. [ 9.683452] WARN::ep_dequeue:423: bogus device state
  958.  
  959. [ 9.865463] rndis_function_bind_config MAC: 22:60:CA:2E:20:AE
  960. [ 9.865851] android_usb gadget: using random self ethernet address
  961. [ 9.865940] android_usb gadget: using previous host ethernet address
  962. [ 9.872116] rndis0: MAC 36:54:3b:65:e6:63
  963. [ 9.872271] rndis0: HOST MAC 22:60:ca:2e:20:ae
  964. [ 9.872778] pcd_pullup, is_on 1
  965. [ 10.373205] pcd_pullup, is_on 0
  966. [ 10.373394] WARN::ep_dequeue:423: bogus device state
  967.  
  968. [ 10.413732] [otg id chg] last id -1 current id 1
  969. [ 10.413864] PortPower off
  970. [ 10.413911] rk_battery_charger_detect_cb , battery_charger_detect 6
  971. [ 10.423577] rk818-battery rk818-battery: charge enable, otg disable
  972. [ 10.513241] rndis_function_bind_config MAC: 22:60:CA:2E:20:AE
  973. [ 10.513300] android_usb gadget: using random self ethernet address
  974. [ 10.513313] android_usb gadget: using previous host ethernet address
  975. [ 10.513434] Using Buffer DMA mode
  976. [ 10.513448] Periodic Transfer Interrupt Enhancement - disabled
  977. [ 10.513460] Multiprocessor Interrupt Enhancement - disabled
  978. [ 10.513475] OTG VER PARAM: 0, OTG VER FLAG: 0
  979. [ 10.513490] ^^^^^^^^^^^^^^^^^Device Mode
  980. [ 10.514159] rndis0: MAC fa:e0:95:28:a8:c9
  981. [ 10.514172] rndis0: HOST MAC 22:60:ca:2e:20:ae
  982. [ 10.514199] pcd_pullup, is_on 1
  983. [ 10.845343] rk818-battery rk818-battery: changed: dsoc=100, rsoc=100
  984. [ 10.864571] pcd_pullup, is_on 0
  985. [ 10.864621] WARN::ep_dequeue:423: bogus device state
  986.  
  987. [ 11.004294] rk_battery_charger_detect_cb , battery_charger_detect 0
  988. [ 11.007350] rndis_function_bind_config MAC: 22:60:CA:2E:20:AE
  989. [ 11.007625] android_usb gadget: using random self ethernet address
  990. [ 11.007710] android_usb gadget: using previous host ethernet address
  991. [ 11.010121] rndis0: MAC d6:48:5e:3c:01:8e
  992. [ 11.010205] rndis0: HOST MAC 22:60:ca:2e:20:ae
  993. [ 11.010401] pcd_pullup, is_on 1
  994. [ 11.028445] pcd_pullup, is_on 0
  995. [ 11.028473] WARN::ep_dequeue:423: bogus device state
  996.  
  997. [ 11.163943] rndis_function_bind_config MAC: 22:60:CA:2E:20:AE
  998. [ 11.164268] android_usb gadget: using random self ethernet address
  999. [ 11.164356] android_usb gadget: using previous host ethernet address
  1000. [ 11.166874] rndis0: MAC 3a:5a:67:3a:5f:f7
  1001. [ 11.166991] rndis0: HOST MAC 22:60:ca:2e:20:ae
  1002. [ 11.167258] pcd_pullup, is_on 1
  1003. [ 11.190278] IPv6: ADDRCONF(NETDEV_UP): rndis0: link is not ready
  1004. [ 11.418625] rk818-battery rk818-battery: set charge to digital termination mode
  1005. [ 12.501830] EXT4-fs (rknand_userdata): re-mounted. Opts: (null)
  1006. [ 13.776771] systemd[1]: systemd 208 running in system mode. (+PAM -LIBWRAP -AUDIT -SELINUX +IMA +SYSVINIT -LIBCRYPTSETUP +GCRYPT +ACL +XZ)
  1007. [ 13.787924] systemd[1]: Failed to insert module 'autofs4'
  1008. [ 13.789334] systemd[1]: Set hostname to <Sailfish>.
  1009. [ 14.014161] systemd[1]: usb-moded.service has a D-Bus service name specified, but is not of type dbus. Ignoring.
  1010. [ 14.141192] systemd[1]: sensorfwd.service has a D-Bus service name specified, but is not of type dbus. Ignoring.
  1011. [ 14.210513] systemd[1]: [/lib/systemd/system/none.mount:7] Not an absolute path, ignoring: none
  1012. [ 14.217661] systemd[1]: Cannot create mount unit for API file system /sys/fs/pstore. Refusing.
  1013. [ 14.243045] systemd[1]: Cannot add dependency job for unit sys-fs-pstore.mount, ignoring: Unit sys-fs-pstore.mount failed to load: Invalid argument. See system logs and 'sy.
  1014. [ 14.248083] systemd[1]: Expecting device dev-ttyFIQ0.device...
  1015. [ 14.252847] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
  1016. [ 14.253404] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
  1017. [ 14.253566] systemd[1]: Starting Delayed Shutdown Socket.
  1018. [ 14.258861] systemd[1]: Listening on Delayed Shutdown Socket.
  1019. [ 14.258984] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
  1020. [ 14.265429] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
  1021. [ 14.265584] systemd[1]: Starting Journal Socket.
  1022. [ 14.270287] systemd[1]: Listening on Journal Socket.
  1023. [ 14.270522] systemd[1]: Mounted Huge Pages File System.
  1024. [ 14.270672] systemd[1]: Mounting Debug File System...
  1025. [ 14.276305] systemd[1]: Mounted POSIX Message Queue File System.
  1026. [ 14.276414] systemd[1]: Starting Journal Service...
  1027. [ 14.285709] systemd[1]: Started Journal Service.
  1028. [ 14.303036] systemd-journald[412]: Vacuuming done, freed 0 bytes
  1029. [ 14.328337] systemd-readahead[418]: Bumped block_nr parameter of 31:11 to 20480. This is a temporary hack and should be removed one day.
  1030. [ 14.848141] systemd-udevd[439]: starting version 208
  1031. [ 14.934429] EXT4-fs (rknand_userdata): re-mounted. Opts: (null)
  1032. [ 16.364336] EXT4-fs (rknand_metadata): mounted filesystem with ordered data mode. Opts: noauto_da_alloc,discard
  1033. [ 17.247895] EXT4-fs (rknand_system): mounted filesystem with ordered data mode. Opts: noauto_da_alloc
  1034. [ 17.774038] systemd-journald[412]: Received request to flush runtime journal from PID 1
  1035. [ 18.072205] init: could not import file 'init.box.samba.rc' from '/init.rk30board.rc'
  1036. [ 18.072584] init: cannot find '/sbin/ueventd', disabling 'ueventd'
  1037. [ 18.079419] pcd_pullup, is_on 0
  1038. [ 18.079436] WARN::ep_dequeue:423: bogus device state
  1039.  
  1040. [ 18.138816] rndis_function_bind_config MAC: 22:60:CA:2E:20:AE
  1041. [ 18.138873] android_usb gadget: using random self ethernet address
  1042. [ 18.138881] android_usb gadget: using previous host ethernet address
  1043. [ 18.139203] rndis0: MAC b2:69:0b:c4:7e:e8
  1044. [ 18.139212] rndis0: HOST MAC 22:60:ca:2e:20:ae
  1045. [ 18.139255] pcd_pullup, is_on 1
  1046. [ 18.150025] IPv6: ADDRCONF(NETDEV_UP): rndis0: link is not ready
  1047. [ 18.205528] rk818_alm_irq:irq=194,rtc_ctl=0x42
  1048. [ 18.495044] rk3288-lcdc lcdc0: blank mode:0
  1049. [ 18.495055] [GSLX680] Enter gsl_ts_late_resume
  1050. [ 18.495059] I'am in gsl_ts_resume() start
  1051. [ 18.495062] gsl gslX680_shutdown_high
  1052. [ 18.521804] gsl reset_chip
  1053. [ 18.610670] rockchip_i2c ff160000.i2c: Addr[0x0040] irq in STATE_IDLE, ipd = 0x21
  1054. [ 18.649698] gsl startup_chip
  1055. [ 18.669380] ------gsl check_mem_data ------
  1056. [ 18.699595] init: /dev/hw_random not found
  1057. [ 18.699638] keychord: using input dev rk29-keypad for fevent
  1058. [ 18.709494] #########gsl check mem read 0xb0 = 5a 5a 5a 5a #########
  1059. [ 18.709506] gsl_ts_resume () : queue gsl_monitor_work
  1060. [ 18.712214] init: /dev/hw_random not found
  1061. [ 18.712276] init: Failed to bind socket 'property_service': No such file or directory
  1062. [ 18.712303] init: start_property_service() failed
  1063. [ 19.189592] rk818_alm_irq:irq=194,rtc_ctl=0x42
  1064. [ 20.173631] rk818_alm_irq:irq=194,rtc_ctl=0x42
  1065. [ 20.253640] dwc_otg_hcd_enable, enable host controller
  1066. [ 20.357020] Using Buffer DMA mode
  1067. [ 20.357041] Periodic Transfer Interrupt Enhancement - disabled
  1068. [ 20.357048] Multiprocessor Interrupt Enhancement - disabled
  1069. [ 20.357055] OTG VER PARAM: 0, OTG VER FLAG: 0
  1070. [ 20.357061] ^^^^^^^^^^^^^^^^^^Host Mode
  1071. [ 20.401294] Init: Power Port (0)
  1072. [ 20.401347] ff540000.usb resume, HPRT0:0x21401
  1073. [ 20.539027] Indeed it is in host mode hprt0 = 00021501
  1074. [ 20.716125] usb 3-1: new high-speed USB device number 2 using usb20_host
  1075. [ 20.716336] Indeed it is in host mode hprt0 = 00001101
  1076. [ 20.913908] usb 3-1: New USB device found, idVendor=1e0e, idProduct=9001
  1077. [ 20.913929] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
  1078. [ 20.913938] usb 3-1: Product: SimTech, Incorporated
  1079. [ 20.913946] usb 3-1: Manufacturer: SimTech, Incorporated
  1080. [ 20.913954] usb 3-1: SerialNumber: 0123456789ABCDEF
  1081. [ 20.914714] option 3-1:1.0: GSM modem (1-port) converter detected
  1082. [ 20.914873] usb 3-1: GSM modem (1-port) converter now attached to ttyUSB0
  1083. [ 20.915052] option 3-1:1.1: GSM modem (1-port) converter detected
  1084. [ 20.915195] usb 3-1: GSM modem (1-port) converter now attached to ttyUSB1
  1085. [ 20.915397] option 3-1:1.2: GSM modem (1-port) converter detected
  1086. [ 20.915540] usb 3-1: GSM modem (1-port) converter now attached to ttyUSB2
  1087. [ 20.915722] option 3-1:1.3: GSM modem (1-port) converter detected
  1088. [ 20.915864] usb 3-1: GSM modem (1-port) converter now attached to ttyUSB3
  1089. [ 20.916076] option 3-1:1.4: GSM modem (1-port) converter detected
  1090. [ 20.916217] usb 3-1: GSM modem (1-port) converter now attached to ttyUSB4
  1091. [ 20.916601] option 3-1:1.6: GSM modem (1-port) converter detected
  1092. [ 20.916746] usb 3-1: GSM modem (1-port) converter now attached to ttyUSB5
  1093. [ 21.157700] rk818_alm_irq:irq=194,rtc_ctl=0x42
  1094. [ 21.731501] warning: `ofonod' uses 32-bit capabilities (legacy support in use)
  1095. [ 22.141761] rk818_alm_irq:irq=194,rtc_ctl=0x42
  1096. [ 22.410456] rk3288-lcdc lcdc0: blank mode:0
  1097. [ 22.410469] [GSLX680] Enter gsl_ts_late_resume
  1098. [ 22.410472] I'am in gsl_ts_resume() start
  1099. [ 22.410474] gsl gslX680_shutdown_high
  1100. [ 22.438106] gsl reset_chip
  1101. [ 22.526967] rockchip_i2c ff160000.i2c: Addr[0x0040] irq in STATE_IDLE, ipd = 0x21
  1102. [ 22.566008] gsl startup_chip
  1103. [ 22.585689] ------gsl check_mem_data ------
  1104. [ 22.625787] #########gsl check mem read 0xb0 = 5a 5a 5a 5a #########
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!