Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- Linux version 2.6.32-zen6 (root@slax) (gcc version 4.4.3 (GCC) ) #1 ZEN SMP PREEMPT Tue Feb 2 17:27:26 UTC 2010
- KERNEL supported cpus:
- Intel GenuineIntel
- AMD AuthenticAMD
- NSC Geode by NSC
- Cyrix CyrixInstead
- Centaur CentaurHauls
- Transmeta GenuineTMx86
- Transmeta TransmetaCPU
- UMC UMC UMC UMC
- BIOS-provided physical RAM map:
- BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
- BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
- BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
- BIOS-e820: 0000000000100000 - 000000003f7b0000 (usable)
- BIOS-e820: 000000003f7b0000 - 000000003f7be000 (ACPI data)
- BIOS-e820: 000000003f7be000 - 000000003f7f0000 (ACPI NVS)
- BIOS-e820: 000000003f7f0000 - 000000003f800000 (reserved)
- BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
- BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
- DMI present.
- last_pfn = 0x3f7b0 max_arch_pfn = 0x100000
- MTRR default type: uncachable
- MTRR fixed ranges enabled:
- 00000-9FFFF write-back
- A0000-DFFFF uncachable
- E0000-E3FFF write-protect
- E4000-EFFFF write-through
- F0000-FFFFF write-protect
- MTRR variable ranges enabled:
- 0 base 000000000 mask 0C0000000 write-back
- 1 base 03F800000 mask 0FF800000 uncachable
- 2 disabled
- 3 disabled
- 4 disabled
- 5 disabled
- 6 disabled
- 7 disabled
- x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
- initial memory mapped : 0 - 01800000
- init_memory_mapping: 0000000000000000-00000000377fe000
- 0000000000 - 0000400000 page 4k
- 0000400000 - 0037400000 page 2M
- 0037400000 - 00377fe000 page 4k
- kernel direct mapping tables up to 377fe000 @ 7000-c000
- RAMDISK: 3f5c0000 - 3f7af59a
- Allocated new RAMDISK: 00100000 - 002ef59a
- Move RAMDISK from 000000003f5c0000 - 000000003f7af599 to 00100000 - 002ef599
- ACPI: RSDP 000f9d40 00014 (v00 ACPIAM)
- ACPI: RSDT 3f7b0000 00040 (v01 061909 RSDT0044 20090619 MSFT 00000097)
- ACPI: FACP 3f7b0200 00084 (v02 061909 FACP0044 20090619 MSFT 00000097)
- ACPI: DSDT 3f7b0430 07FA7 (v01 308F0 308F0F07 00000F07 INTL 20051117)
- ACPI: FACS 3f7be000 00040
- ACPI: APIC 3f7b0390 0005C (v01 061909 APIC0044 20090619 MSFT 00000097)
- ACPI: MCFG 3f7b03f0 0003C (v01 061909 OEMMCFG 20090619 MSFT 00000097)
- ACPI: OEMB 3f7be040 00224 (v01 061909 OEMB0044 20090619 MSFT 00000097)
- ACPI: HPET 3f7b83e0 00038 (v01 061909 OEMHPET 20090619 MSFT 00000097)
- ACPI: ASF! 3f7b8418 00075 (v32 LEGEND I865PASF 00000001 INTL 20051117)
- ACPI: SSDT 3f7beba0 004F0 (v01 PmRef CpuPm 00003000 INTL 20051117)
- ACPI: Local APIC address 0xfee00000
- 127MB HIGHMEM available.
- 887MB LOWMEM available.
- mapped low ram: 0 - 377fe000
- low ram: 0 - 377fe000
- node 0 low ram: 00000000 - 377fe000
- node 0 bootmap 00008000 - 0000ef00
- (9 early reservations) ==> bootmem [0000000000 - 00377fe000]
- #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
- #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
- #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
- #3 [0001000000 - 000156e610] TEXT DATA BSS ==> [0001000000 - 000156e610]
- #4 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]
- #5 [000156f000 - 00015751dc] BRK ==> [000156f000 - 00015751dc]
- #6 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000]
- #7 [0000100000 - 00002ef59a] NEW RAMDISK ==> [0000100000 - 00002ef59a]
- #8 [0000008000 - 000000f000] BOOTMAP ==> [0000008000 - 000000f000]
- found SMP MP-table at [c00ff780] ff780
- Zone PFN ranges:
- DMA 0x00000000 -> 0x00001000
- Normal 0x00001000 -> 0x000377fe
- HighMem 0x000377fe -> 0x0003f7b0
- Movable zone start PFN for each node
- early_node_map[2] active PFN ranges
- 0: 0x00000000 -> 0x0000009f
- 0: 0x00000100 -> 0x0003f7b0
- On node 0 totalpages: 259919
- free_area_init_node: node 0, pgdat c14bc170, node_mem_map c1577000
- DMA zone: 32 pages used for memmap
- DMA zone: 0 pages reserved
- DMA zone: 3967 pages, LIFO batch:0
- Normal zone: 1744 pages used for memmap
- Normal zone: 221486 pages, LIFO batch:31
- HighMem zone: 256 pages used for memmap
- HighMem zone: 32434 pages, LIFO batch:7
- Using APIC driver default
- ACPI: PM-Timer IO Port: 0x808
- ACPI: Local APIC address 0xfee00000
- ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
- ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
- ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
- IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
- ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
- ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
- ACPI: IRQ0 used by override.
- ACPI: IRQ2 used by override.
- ACPI: IRQ9 used by override.
- Enabling APIC mode: Flat. Using 1 I/O APICs
- Using ACPI (MADT) for SMP configuration information
- ACPI: HPET id: 0xffffffff base: 0xfed00000
- SMP: Allowing 2 CPUs, 0 hotplug CPUs
- nr_irqs_gsi: 24
- PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
- PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
- PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
- Allocating PCI resources starting at 3f800000 (gap: 3f800000:bf600000)
- NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
- PERCPU: Embedded 10 pages/cpu @c2000000 s20360 r0 d20600 u2097152
- pcpu-alloc: s20360 r0 d20600 u2097152 alloc=1*4194304
- pcpu-alloc: [0] 0 1
- Built 1 zonelists in Zone order, mobility grouping on. Total pages: 257887
- Kernel command line: initrd=/boot/initrd.lz ramdisk_size=6666 root=/dev/ram0 rw changes=/slax/ noagp BOOT_IMAGE=/boot/vmlinuz
- PID hash table entries: 4096 (order: 2, 16384 bytes)
- Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
- Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
- Enabling fast FPU save and restore... done.
- Enabling unmasked SIMD FPU exception support... done.
- Initializing CPU#0
- Initializing HighMem for node 0 (000377fe:0003f7b0)
- Memory: 1022552k/1040064k available (3468k kernel code, 16628k reserved, 1394k data, 452k init, 130760k highmem)
- virtual kernel memory layout:
- fixmap : 0xfff1e000 - 0xfffff000 ( 900 kB)
- pkmap : 0xff800000 - 0xffc00000 (4096 kB)
- vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
- lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
- .init : 0xc14c0000 - 0xc1531000 ( 452 kB)
- .data : 0xc13632cd - 0xc14bfc60 (1394 kB)
- .text : 0xc1000000 - 0xc13632cd (3468 kB)
- Checking if this processor honours the WP bit even in supervisor mode...Ok.
- Hierarchical RCU implementation.
- NR_IRQS:512
- Console: colour VGA+ 80x25
- console [tty0] enabled
- hpet clockevent registered
- HPET: 3 timers in total, 0 timers will be used for per-cpu timer
- Fast TSC calibration using PIT
- Detected 1662.727 MHz processor.
- Calibrating delay loop (skipped), value calculated using timer frequency.. 3325.45 BogoMIPS (lpj=1662727)
- Mount-cache hash table entries: 512
- CPU: L1 I cache: 32K, L1 D cache: 24K
- CPU: L2 cache: 512K
- CPU: Physical Processor ID: 0
- CPU: Processor Core ID: 0
- mce: CPU supports 5 MCE banks
- CPU0: Thermal monitoring enabled (TM2)
- using mwait in idle threads.
- Checking 'hlt' instruction... OK.
- ACPI: Core revision 20090903
- ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
- CPU0: Intel(R) Atom(TM) CPU N280 @ 1.66GHz stepping 02
- Booting processor 1 APIC 0x1 ip 0x6000
- Initializing CPU#1
- CPU: L1 I cache: 32K, L1 D cache: 24K
- CPU: L2 cache: 512K
- CPU: Physical Processor ID: 0
- CPU: Processor Core ID: 0
- CPU1: Thermal monitoring enabled (TM2)
- CPU1: Intel(R) Atom(TM) CPU N280 @ 1.66GHz stepping 02
- checking TSC synchronization [CPU#0 -> CPU#1]: passed.
- Brought up 2 CPUs
- Total of 2 processors activated (6650.60 BogoMIPS).
- xor: automatically using best checksumming function: pIII_sse
- pIII_sse : 5080.000 MB/sec
- xor: using function: pIII_sse (5080.000 MB/sec)
- NET: Registered protocol family 16
- EISA bus registered
- ACPI: bus type pci registered
- PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
- PCI: Not using MMCONFIG.
- PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=3
- PCI: Using configuration type 1 for base access
- bio: create slab <bio-0> at 0
- ACPI: EC: Look up EC in DSDT
- ACPI: BIOS _OSI(Linux) query ignored
- ACPI: Executed 1 blocks of module-level executable AML code
- ACPI: Interpreter enabled
- ACPI: (supports S0 S3 S4 S5)
- ACPI: Using IOAPIC for interrupt routing
- PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
- PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
- PCI: updated MCFG configuration 0: base e0000000 segment 0 buses 0 - 63
- PCI: Using MMCONFIG for extended config space
- ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
- ACPI: No dock devices found.
- ACPI: PCI Root Bridge [PCI0] (0000:00)
- pci 0000:00:02.0: reg 10 32bit mmio: [0xfe980000-0xfe9fffff]
- pci 0000:00:02.0: reg 14 io port: [0xdc80-0xdc87]
- pci 0000:00:02.0: reg 18 32bit mmio pref: [0xd0000000-0xdfffffff]
- pci 0000:00:02.0: reg 1c 32bit mmio: [0xfe940000-0xfe97ffff]
- pci 0000:00:02.1: reg 10 32bit mmio: [0xfe880000-0xfe8fffff]
- pci 0000:00:1b.0: reg 10 64bit mmio: [0xfe938000-0xfe93bfff]
- pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
- pci 0000:00:1b.0: PME# disabled
- pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
- pci 0000:00:1c.0: PME# disabled
- pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
- pci 0000:00:1c.1: PME# disabled
- pci 0000:00:1d.0: reg 20 io port: [0xdc00-0xdc1f]
- pci 0000:00:1d.1: reg 20 io port: [0xd880-0xd89f]
- pci 0000:00:1d.2: reg 20 io port: [0xd800-0xd81f]
- pci 0000:00:1d.3: reg 20 io port: [0xd480-0xd49f]
- pci 0000:00:1d.7: reg 10 32bit mmio: [0xfe937c00-0xfe937fff]
- pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
- pci 0000:00:1d.7: PME# disabled
- pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
- pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH6 GPIO
- pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0500 (mask 0003)
- pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 1640 (mask 000f)
- pci 0000:00:1f.2: reg 10 io port: [0xd400-0xd407]
- pci 0000:00:1f.2: reg 14 io port: [0xd080-0xd083]
- pci 0000:00:1f.2: reg 18 io port: [0xd000-0xd007]
- pci 0000:00:1f.2: reg 1c io port: [0xcc80-0xcc83]
- pci 0000:00:1f.2: reg 20 io port: [0xcc00-0xcc0f]
- pci 0000:00:1f.2: reg 24 32bit mmio: [0xfe937800-0xfe937bff]
- pci 0000:00:1f.2: PME# supported from D3hot
- pci 0000:00:1f.2: PME# disabled
- pci 0000:00:1f.3: reg 20 io port: [0x400-0x41f]
- pci 0000:01:00.0: reg 10 64bit mmio: [0xfeafc000-0xfeafffff]
- pci 0000:01:00.0: supports D1 D2
- pci 0000:00:1c.0: bridge 32bit mmio: [0xfea00000-0xfeafffff]
- pci 0000:02:00.0: reg 10 64bit mmio: [0xfebc0000-0xfebfffff]
- pci 0000:02:00.0: reg 18 io port: [0xec80-0xecff]
- pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
- pci 0000:02:00.0: PME# disabled
- pci 0000:00:1c.1: bridge io port: [0xe000-0xefff]
- pci 0000:00:1c.1: bridge 32bit mmio: [0xfeb00000-0xfebfffff]
- pci 0000:00:1e.0: transparent bridge
- pci_bus 0000:00: on NUMA node 0
- ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
- ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
- ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT]
- ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
- ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
- ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11 12 *14 15)
- ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15)
- ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
- ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
- ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
- ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 *15)
- vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
- vgaarb: loaded
- SCSI subsystem initialized
- libata version 3.00 loaded.
- usbcore: registered new interface driver usbfs
- usbcore: registered new interface driver hub
- usbcore: registered new device driver usb
- raid6: int32x1 167 MB/s
- raid6: int32x2 269 MB/s
- raid6: int32x4 281 MB/s
- raid6: int32x8 289 MB/s
- raid6: mmxx1 375 MB/s
- raid6: mmxx2 687 MB/s
- raid6: sse1x1 300 MB/s
- raid6: sse1x2 515 MB/s
- raid6: sse2x1 601 MB/s
- raid6: sse2x2 1023 MB/s
- raid6: using algorithm sse2x2 (1023 MB/s)
- PCI: Using ACPI for IRQ routing
- hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
- hpet0: 3 comparators, 64-bit 14.318180 MHz counter
- Switching to clocksource tsc
- pnp: PnP ACPI init
- ACPI: bus type pnp registered
- pnp: PnP ACPI: found 13 devices
- ACPI: ACPI bus type pnp unregistered
- PnPBIOS: Disabled by ACPI PNP
- system 00:01: iomem range 0xfed13000-0xfed19fff has been reserved
- system 00:08: ioport range 0x4d0-0x4d1 has been reserved
- system 00:08: ioport range 0x500-0x501 has been reserved
- system 00:08: ioport range 0x800-0x87f has been reserved
- system 00:08: ioport range 0x480-0x4bf has been reserved
- system 00:08: iomem range 0xfed1c000-0xfed1ffff has been reserved
- system 00:08: iomem range 0xfed20000-0xfed3ffff has been reserved
- system 00:08: iomem range 0xfed40000-0xfed8ffff has been reserved
- system 00:0a: iomem range 0xfec00000-0xfec00fff could not be reserved
- system 00:0a: iomem range 0xfee00000-0xfee00fff has been reserved
- system 00:0b: iomem range 0xe0000000-0xe3ffffff has been reserved
- system 00:0c: iomem range 0x0-0x9ffff could not be reserved
- system 00:0c: iomem range 0xc0000-0xcffff could not be reserved
- system 00:0c: iomem range 0xe0000-0xfffff could not be reserved
- system 00:0c: iomem range 0x100000-0x3f7fffff could not be reserved
- system 00:0c: iomem range 0xfed90000-0xffffffff could not be reserved
- pci 0000:00:1c.0: PCI bridge, secondary bus 0000:01
- pci 0000:00:1c.0: IO window: 0x1000-0x1fff
- pci 0000:00:1c.0: MEM window: 0xfea00000-0xfeafffff
- pci 0000:00:1c.0: PREFETCH window: 0x00000040000000-0x000000401fffff
- pci 0000:00:1c.1: PCI bridge, secondary bus 0000:02
- pci 0000:00:1c.1: IO window: 0xe000-0xefff
- pci 0000:00:1c.1: MEM window: 0xfeb00000-0xfebfffff
- pci 0000:00:1c.1: PREFETCH window: 0x00000040200000-0x000000403fffff
- pci 0000:00:1e.0: PCI bridge, secondary bus 0000:03
- pci 0000:00:1e.0: IO window: disabled
- pci 0000:00:1e.0: MEM window: disabled
- pci 0000:00:1e.0: PREFETCH window: disabled
- pci 0000:00:1c.0: enabling device (0106 -> 0107)
- pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
- pci 0000:00:1c.0: setting latency timer to 64
- pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
- pci 0000:00:1c.1: setting latency timer to 64
- pci 0000:00:1e.0: setting latency timer to 64
- pci_bus 0000:00: resource 0 io: [0x00-0xffff]
- pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
- pci_bus 0000:01: resource 0 io: [0x1000-0x1fff]
- pci_bus 0000:01: resource 1 mem: [0xfea00000-0xfeafffff]
- pci_bus 0000:01: resource 2 pref mem [0x40000000-0x401fffff]
- pci_bus 0000:02: resource 0 io: [0xe000-0xefff]
- pci_bus 0000:02: resource 1 mem: [0xfeb00000-0xfebfffff]
- pci_bus 0000:02: resource 2 pref mem [0x40200000-0x403fffff]
- pci_bus 0000:03: resource 3 io: [0x00-0xffff]
- pci_bus 0000:03: resource 4 mem: [0x000000-0xffffffff]
- NET: Registered protocol family 2
- IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
- TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
- TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
- TCP: Hash tables configured (established 131072 bind 65536)
- TCP reno registered
- NET: Registered protocol family 1
- pci 0000:00:02.0: Boot video device
- Trying to unpack rootfs image as initramfs...
- rootfs image is not initramfs (no cpio magic); looks like an initrd
- Freeing initrd memory: 1981k freed
- highmem bounce pool size: 64 pages
- HugeTLB registered 4 MB page size, pre-allocated 0 pages
- VFS: Disk quotas dquot_6.5.2
- Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
- SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
- SGI XFS Quota Management subsystem
- msgmni has been set to 1746
- alg: No test for stdrng (krng)
- async_tx: api initialized (async)
- Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
- io scheduler noop registered
- io scheduler sio registered (default)
- pcieport 0000:00:1c.0: irq 24 for MSI/MSI-X
- pcieport 0000:00:1c.0: setting latency timer to 64
- pcieport 0000:00:1c.1: irq 25 for MSI/MSI-X
- pcieport 0000:00:1c.1: setting latency timer to 64
- ACPI: AC Adapter [AC0] (off-line)
- input: Lid Switch as /class/input/input0
- ACPI: Lid Switch [LID]
- input: Sleep Button as /class/input/input1
- ACPI: Sleep Button [SLPB]
- input: Power Button as /class/input/input2
- ACPI: Power Button [PWRB]
- input: Power Button as /class/input/input3
- ACPI: Power Button [PWRF]
- ACPI: SSDT 3f7be340 001FA (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
- ACPI: SSDT 3f7be5d0 005D0 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
- Monitor-Mwait will be used to enter C-1 state
- Monitor-Mwait will be used to enter C-2 state
- Monitor-Mwait will be used to enter C-3 state
- Marking TSC unstable due to TSC halts in idle
- Switching to clocksource hpet
- processor LNXCPU:00: registered as cooling_device0
- ACPI: SSDT 3f7be270 000CC (v01 PmRef Cpu1Ist 00003000 INTL 20051117)
- ACPI: SSDT 3f7be540 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20051117)
- processor LNXCPU:01: registered as cooling_device1
- thermal LNXTHERM:01: registered as thermal_zone0
- ACPI: Thermal Zone [THRM] (49 C)
- isapnp: Scanning for PnP cards...
- ACPI: Battery Slot [BAT1] (battery present)
- isapnp: No Plug & Play device found
- Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
- floppy0: no floppy controllers found
- brd: module loaded
- loop: module loaded
- ata_piix 0000:00:1f.2: version 2.13
- ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
- ata_piix 0000:00:1f.2: MAP [ P0 P2 -- -- ]
- ata_piix 0000:00:1f.2: setting latency timer to 64
- scsi0 : ata_piix
- scsi1 : ata_piix
- ata1: SATA max UDMA/133 cmd 0xd400 ctl 0xd080 bmdma 0xcc00 irq 19
- ata2: SATA max UDMA/133 cmd 0xd000 ctl 0xcc80 bmdma 0xcc08 irq 19
- scsi2 : pata_legacy
- ata3: PATA max PIO4 cmd 0x1f0 ctl 0x3f6 irq 14
- ata1.00: ATA-8: ST9160314AS, 0005HPM1, max UDMA/100
- ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32)
- ata1.00: configured for UDMA/100
- scsi 0:0:0:0: Direct-Access ATA ST9160314AS 0005 PQ: 0 ANSI: 5
- sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
- sd 0:0:0:0: [sda] Write Protect is off
- sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
- sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- sda: sda1 sda2 sda3 < sda5 sda6 sda7 sda8 sda9 sda10 >
- sd 0:0:0:0: [sda] Attached SCSI disk
- scsi3 : pata_legacy
- ata4: PATA max PIO4 cmd 0x170 ctl 0x376 irq 15
- Fixed MDIO Bus: probed
- Broadcom NetXtreme II CNIC Driver cnic v2.0.1 (Oct 01, 2009)
- I2O subsystem v1.325
- i2o: max drivers = 8
- ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
- ehci_hcd 0000:00:1d.7: setting latency timer to 64
- ehci_hcd 0000:00:1d.7: EHCI Host Controller
- ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
- ehci_hcd 0000:00:1d.7: using broken periodic workaround
- ehci_hcd 0000:00:1d.7: debug port 1
- ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
- ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfe937c00
- ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
- usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
- usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- usb usb1: Product: EHCI Host Controller
- usb usb1: Manufacturer: Linux 2.6.32-zen6 ehci_hcd
- usb usb1: SerialNumber: 0000:00:1d.7
- usb usb1: configuration #1 chosen from 1 choice
- hub 1-0:1.0: USB hub found
- hub 1-0:1.0: 8 ports detected
- ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
- uhci_hcd: USB Universal Host Controller Interface driver
- uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
- uhci_hcd 0000:00:1d.0: setting latency timer to 64
- uhci_hcd 0000:00:1d.0: UHCI Host Controller
- uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
- uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000dc00
- usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
- usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- usb usb2: Product: UHCI Host Controller
- usb usb2: Manufacturer: Linux 2.6.32-zen6 uhci_hcd
- usb usb2: SerialNumber: 0000:00:1d.0
- usb usb2: configuration #1 chosen from 1 choice
- hub 2-0:1.0: USB hub found
- hub 2-0:1.0: 2 ports detected
- uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
- uhci_hcd 0000:00:1d.1: setting latency timer to 64
- uhci_hcd 0000:00:1d.1: UHCI Host Controller
- uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
- uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000d880
- usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
- usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- usb usb3: Product: UHCI Host Controller
- usb usb3: Manufacturer: Linux 2.6.32-zen6 uhci_hcd
- usb usb3: SerialNumber: 0000:00:1d.1
- usb usb3: configuration #1 chosen from 1 choice
- hub 3-0:1.0: USB hub found
- hub 3-0:1.0: 2 ports detected
- uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
- uhci_hcd 0000:00:1d.2: setting latency timer to 64
- uhci_hcd 0000:00:1d.2: UHCI Host Controller
- uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
- uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000d800
- usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
- usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- usb usb4: Product: UHCI Host Controller
- usb usb4: Manufacturer: Linux 2.6.32-zen6 uhci_hcd
- usb usb4: SerialNumber: 0000:00:1d.2
- usb usb4: configuration #1 chosen from 1 choice
- hub 4-0:1.0: USB hub found
- hub 4-0:1.0: 2 ports detected
- uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
- uhci_hcd 0000:00:1d.3: setting latency timer to 64
- uhci_hcd 0000:00:1d.3: UHCI Host Controller
- uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
- uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000d480
- usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
- usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- usb usb5: Product: UHCI Host Controller
- usb usb5: Manufacturer: Linux 2.6.32-zen6 uhci_hcd
- usb usb5: SerialNumber: 0000:00:1d.3
- usb usb5: configuration #1 chosen from 1 choice
- hub 5-0:1.0: USB hub found
- hub 5-0:1.0: 2 ports detected
- Initializing USB Mass Storage driver...
- usbcore: registered new interface driver usb-storage
- USB Mass Storage support registered.
- usbcore: registered new interface driver ums-alauda
- usbcore: registered new interface driver ums-cypress
- usbcore: registered new interface driver ums-datafab
- usbcore: registered new interface driver ums-freecom
- usbcore: registered new interface driver ums-isd200
- usbcore: registered new interface driver ums-jumpshot
- usbcore: registered new interface driver ums-karma
- usbcore: registered new interface driver ums-onetouch
- usbcore: registered new interface driver ums-sddr09
- usbcore: registered new interface driver ums-sddr55
- usbcore: registered new interface driver ums-usbat
- PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
- i8042.c: Detected active multiplexing controller, rev 1.1.
- serio: i8042 KBD port at 0x60,0x64 irq 1
- serio: i8042 AUX0 port at 0x60,0x64 irq 12
- serio: i8042 AUX1 port at 0x60,0x64 irq 12
- serio: i8042 AUX2 port at 0x60,0x64 irq 12
- serio: i8042 AUX3 port at 0x60,0x64 irq 12
- md: linear personality registered for level -1
- md: raid0 personality registered for level 0
- md: raid1 personality registered for level 1
- md: raid10 personality registered for level 10
- md: raid6 personality registered for level 6
- md: raid5 personality registered for level 5
- md: raid4 personality registered for level 4
- md: multipath personality registered for level -4
- device-mapper: uevent: version 1.0.3
- device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
- EISA: Probing bus 0 at eisa.0
- Cannot allocate resource for EISA slot 1
- EISA: Detected 0 cards.
- cpuidle: using governor ladder
- cpuidle: using governor menu
- Initializing XFRM netlink socket
- NET: Registered protocol family 17
- Using IPI No-Shortcut mode
- TuxOnIce core not loaded yet.
- input: AT Translated Set 2 keyboard as /class/input/input4
- md: Waiting for all devices to be available before autodetect
- md: If you don't use raid, use raid=noautodetect
- md: Autodetecting RAID arrays.
- md: Scanned 0 and added 0 devices.
- md: autorun ...
- md: ... autorun DONE.
- RAMDISK: lzma image found at block 0
- VFS: Mounted root (ext2 filesystem) on device 1:0.
- Freeing unused kernel memory: 452k freed
- BFS CPU scheduler v0.313 by Con Kolivas.
- squashfs: version 4.0 (2009/01/31) Phillip Lougher
- aufs 2-32
- fuse init (API version 7.13)
- usb 1-4: new high speed USB device using ehci_hcd and address 3
- usb 1-4: New USB device found, idVendor=174f, idProduct=1105
- usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
- usb 1-4: Product: USB Video Device
- usb 1-4: Manufacturer: D-MAX
- usb 1-4: configuration #1 chosen from 1 choice
- usb 1-7: new high speed USB device using ehci_hcd and address 4
- usb 1-7: New USB device found, idVendor=1307, idProduct=0163
- usb 1-7: New USB device strings: Mfr=1, Product=2, SerialNumber=3
- usb 1-7: Product: USB Mass Storage Device
- usb 1-7: Manufacturer: USBest Technology
- usb 1-7: SerialNumber: 0000000000031C
- usb 1-7: configuration #1 chosen from 1 choice
- scsi4 : SCSI emulation for USB Mass Storage devices
- usb-storage: device found at 4
- usb-storage: waiting for device to settle before scanning
- usb 2-1: new low speed USB device using uhci_hcd and address 2
- usb 2-1: New USB device found, idVendor=1b1a, idProduct=0000
- usb 2-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
- usb 2-1: Product: USB Mouse
- usb 2-1: configuration #1 chosen from 1 choice
- UDF-fs: No partition found (1)
- UDF-fs: No partition found (1)
- EXT3-fs: INFO: recovery required on readonly filesystem.
- EXT3-fs: write access will be enabled during recovery.
- kjournald starting. Commit interval 5 seconds
- EXT3-fs: recovery complete.
- EXT3-fs: mounted filesystem with writeback data mode.
- attempt to access beyond end of device
- sda3: rw=0, want=4, limit=2
- EXT3-fs: unable to read superblock
- attempt to access beyond end of device
- sda3: rw=0, want=4, limit=2
- EXT2-fs: unable to read superblock
- attempt to access beyond end of device
- sda3: rw=0, want=18, limit=2
- REISERFS warning (device sda3): sh-2006 read_super_block: bread failed (dev sda3, block 8, size 1024)
- attempt to access beyond end of device
- sda3: rw=0, want=130, limit=2
- REISERFS warning (device sda3): sh-2006 read_super_block: bread failed (dev sda3, block 64, size 1024)
- attempt to access beyond end of device
- sda3: rw=0, want=4, limit=2
- EXT3-fs: unable to read superblock
- attempt to access beyond end of device
- sda3: rw=0, want=4, limit=2
- EXT2-fs: unable to read superblock
- attempt to access beyond end of device
- sda3: rw=0, want=4, limit=2
- EXT4-fs (sda3): unable to read superblock
- attempt to access beyond end of device
- sda3: rw=0, want=66, limit=2
- isofs_fill_super: bread failed, dev=sda3, iso_blknum=16, block=32
- attempt to access beyond end of device
- sda3: rw=0, want=65, limit=2
- attempt to access beyond end of device
- sda3: rw=0, want=257, limit=2
- attempt to access beyond end of device
- sda3: rw=0, want=513, limit=2
- attempt to access beyond end of device
- sda3: rw=0, want=68, limit=2
- attempt to access beyond end of device
- sda3: rw=0, want=1028, limit=2
- attempt to access beyond end of device
- sda3: rw=0, want=2052, limit=2
- UDF-fs: No partition found (1)
- attempt to access beyond end of device
- sda3: rw=0, want=8, limit=2
- attempt to access beyond end of device
- sda3: rw=0, want=4, limit=2
- EXT3-fs: unable to read superblock
- attempt to access beyond end of device
- sda3: rw=0, want=4, limit=2
- EXT2-fs: unable to read superblock
- attempt to access beyond end of device
- sda3: rw=0, want=18, limit=2
- REISERFS warning (device sda3): sh-2006 read_super_block: bread failed (dev sda3, block 8, size 1024)
- attempt to access beyond end of device
- sda3: rw=0, want=130, limit=2
- REISERFS warning (device sda3): sh-2006 read_super_block: bread failed (dev sda3, block 64, size 1024)
- attempt to access beyond end of device
- sda3: rw=0, want=4, limit=2
- EXT3-fs: unable to read superblock
- attempt to access beyond end of device
- sda3: rw=0, want=4, limit=2
- EXT2-fs: unable to read superblock
- attempt to access beyond end of device
- sda3: rw=0, want=4, limit=2
- EXT4-fs (sda3): unable to read superblock
- attempt to access beyond end of device
- sda3: rw=0, want=66, limit=2
- isofs_fill_super: bread failed, dev=sda3, iso_blknum=16, block=32
- attempt to access beyond end of device
- sda3: rw=0, want=65, limit=2
- attempt to access beyond end of device
- sda3: rw=0, want=257, limit=2
- attempt to access beyond end of device
- sda3: rw=0, want=513, limit=2
- attempt to access beyond end of device
- sda3: rw=0, want=68, limit=2
- attempt to access beyond end of device
- sda3: rw=0, want=1028, limit=2
- attempt to access beyond end of device
- sda3: rw=0, want=2052, limit=2
- UDF-fs: No partition found (1)
- attempt to access beyond end of device
- sda3: rw=0, want=8, limit=2
- scsi 4:0:0:0: Direct-Access Ut163 USB2FlashStorage 0.00 PQ: 0 ANSI: 2
- sd 4:0:0:0: [sdb] 1974271 512-byte logical blocks: (1.01 GB/963 MiB)
- sd 4:0:0:0: [sdb] Write Protect is off
- sd 4:0:0:0: [sdb] Mode Sense: 00 00 00 00
- sd 4:0:0:0: [sdb] Assuming drive cache: write through
- usb-storage: device scan complete
- sd 4:0:0:0: [sdb] Assuming drive cache: write through
- sdb: sdb1
- sd 4:0:0:0: [sdb] Assuming drive cache: write through
- sd 4:0:0:0: [sdb] Attached SCSI removable disk
- Adding 2056284k swap on /dev/sda10. Priority:1 extents:1 across:2056284k
- kjournald starting. Commit interval 5 seconds
- EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
- EXT3 FS on sda2, internal journal
- EXT3-fs: mounted filesystem with writeback data mode.
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement