Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
- 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
- The NetBSD Foundation, Inc. All rights reserved.
- Copyright (c) 1982, 1986, 1989, 1991, 1993
- The Regents of the University of California. All rights reserved.
- NetBSD 7.99.5 (CUBIEBOARD.201502210800Z) #0: Sat Feb 21 09:39:18 UTC 2015
- builds@b48.netbsd.org:/home/builds/ab/HEAD/evbarm-earmv7hf/201502210800Z-obj/home/source/ab/HEAD/src/sys/arch/evbarm/compile/CUBIEBOARD
- total memory = 1024 MB
- avail memory = 1008 MB
- sysctl_createv: sysctl_create(machine_arch) returned 17
- timecounter: Timecounters tick every 10.000 msec
- mainbus0 (root)
- cpu0 at mainbus0 core 0: 960 MHz Cortex-A7 r0p4 (Cortex V7A core)
- cpu0: DC enabled IC enabled WB disabled EABT branch prediction enabled
- cpu0: isar: [0]=0x2101110 [1]=0x13112111 [2]=0x21232041 [3]=0x11112131, [4]=0x10011142, [5]=0
- cpu0: mmfr: [0]=0x10101105 [1]=0x40000000 [2]=0x1240000 [3]=0x2102211
- cpu0: pfr: [0]=0x1131 [1]=0x11011
- cpu0: 32KB/32B 2-way L1 VIPT Instruction cache
- cpu0: 32KB/64B 4-way write-back-locking-C L1 PIPT Data cache
- cpu0: 256KB/64B 8-way write-through L2 PIPT Unified cache
- vfp0 at cpu0: NEON MPE (VFP 3.0+), rounding, NaN propagation, denormals
- vfp0: mvfr: [0]=0x10110222 [1]=0x11111111
- cpu1 at mainbus0 core 1
- armperiph0 at mainbus0
- armgic0 at armperiph0: Generic Interrupt Controller, 160 sources (151 valid)
- armgic0: 32 Priorities, 128 SPIs, 7 PPIs, 16 SGIs
- armgtmr0 at armperiph0: ARMv7 Generic 64-bit Timer (24000 kHz)
- armgtmr0: interrupting on irq 27
- timecounter: Timecounter "armgtmr0" frequency 24000000 Hz quality 500
- awinio0 at mainbus0: A20 (0x1651)
- awingpio0 at awinio0: [satapwren >PC3] [usb0drv >PC17] [usb0iddet <PH4] [usb0vbusdet >PH5] [usb1drv >PH6] [usb2drv >PH3] [status-led1 >PH2] [mmc0detect <PH1]
- awindma0 at awinio0: DMA
- awindma0: interrupting on irq 59
- awincnt0 at awinio0
- timecounter: Timecounter "CNT64" frequency 24000000 Hz quality 900
- com0 at awinio0 port 0: ns16550a, working fifo
- com0: console
- awindebe0 at awinio0 port 0: Display Engine Backend (BE0)
- awintcon0 at awinio0 port 0: LCD/TV timing controller (TCON0)
- awinhdmi0 at awinio0: HDMI 1.3
- awinhdmi0: display connected
- awinhdmi0: DVI mode (auto-detected)
- genfb0 at awindebe0: switching to framebuffer console
- genfb0: framebuffer at 0xca000000, size 1680x1050, depth 32, stride 6720
- wsdisplay0 at genfb0 kbdmux 1: console (default, vt100 emulation)
- wsmux1: connecting to wsdisplay0
- wsdisplay0: screen 1-3 added (default, vt100 emulation)
- awinwdt0 at awinio0: default period is 10 seconds
- awinrtc0 at awinio0: RTC
- awinusb0 at awinio0 port 0
- ohci0 at awinusb0: OHCI USB controller
- ohci0: OHCI version 1.0
- usb0 at ohci0: USB revision 1.0
- ohci0: interrupting on irq 96
- ehci0 at awinusb0: EHCI USB controller
- ehci0: EHCI version 1.0
- ehci0: companion controller, 1 port each: ohci0
- usb1 at ehci0: USB revision 2.0
- ehci0: interrupting on irq 71
- awinusb1 at awinio0 port 1
- ohci1 at awinusb1: OHCI USB controller
- ohci1: OHCI version 1.0
- usb2 at ohci1: USB revision 1.0
- ohci1: interrupting on irq 97
- ehci1 at awinusb1: EHCI USB controller
- ehci1: EHCI version 1.0
- ehci1: companion controller, 1 port each: ohci1
- usb3 at ehci1: USB revision 2.0
- ehci1: interrupting on irq 72
- motg0 at awinio0: OTG
- motg0: interrupting at irq 70
- motg0: no restrict gpio found
- motg0: Dynamic FIFO sizing detected, assuming 16Kbytes of FIFO RAM
- usb4 at motg0: USB revision 2.0
- awinmmc0 at awinio0 port 0: SD3.0 (DMA)
- awinmmc0: failed to reserve GPIO "status-led2"
- awinmmc0: interrupting at irq 64
- ahcisata0 at awinio0: AHCI SATA controller
- ahcisata0: interrupting on irq 88
- ahcisata0: ignoring broken port multiplier support
- ahcisata0: AHCI revision 1.10, 1 port, 32 slots, CAP 0x6724ff80<CCCS,PSC,SSC,PMD,SAM,ISS=0x2=Gen2,SCLO,SAL,SALP,SSNTF,SNCQ>
- atabus0 at ahcisata0 channel 0
- awiniic0 at awinio0 port 0: Marvell TWSI controller
- awiniic0: interrupting on irq 39
- iic0 at awiniic0: I2C bus
- awge0 at awinio0: Gigabit Ethernet Controller
- awge0: interrupting on irq 117
- awge0: reset timed out
- awinac0 at awinio0: CODEC
- awinac0: failed to reserve GPIO "audiopactrl"
- audio0 at awinac0: full duplex, playback, capture, mmap, independent
- awinhdmiaudio0 at awinio0: HDMI 1.3
- audio1 at awinhdmiaudio0: half duplex, playback, mmap
- awinnand0 at awinio0
- awinir0 at awinio0 port 0: IR
- awinir0: interrupting on irq 37
- cir0 at awinir0
- gpio0 at awingpio0: 18 pins
- gpio1 at awingpio0: 25 pins
- gpio2 at awingpio0: 28 pins
- gpio3 at awingpio0: 12 pins
- gpio4 at awingpio0: 12 pins
- gpio5 at awingpio0: 28 pins
- gpio6 at awingpio0: 22 pins
- timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
- cpu1: 960 MHz Cortex-A7 r0p4 (Cortex V7A core)
- cpu1: DC enabled IC enabled WB disabled EABT branch prediction enabled
- cpu1: isar: [0]=0x2101110 [1]=0x13112111 [2]=0x21232041 [3]=0x11112131, [4]=0x10011142, [5]=0
- cpu1: mmfr: [0]=0x10101105 [1]=0x40000000 [2]=0x1240000 [3]=0x2102211
- cpu1: pfr: [0]=0x1131 [1]=0x11011
- cpu1: 32KB/32B 2-way L1 VIPT Instruction cache
- cpu1: 32KB/64B 4-way write-back-locking-C L1 PIPT Data cache
- cpu1: 256KB/64B 8-way write-through L2 PIPT Unified cache
- vfp1 at cpu1: NEON MPE (VFP 3.0+), rounding, NaN propagation, denormals
- vfp1: mvfr: [0]=0x10110222 [1]=0x11111111
- sdmmc0 at awinmmc0
- uhub0 at usb0: Allwinner OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
- uhub0: 1 port with 1 removable, self powered
- uhub1 at usb1: Allwinner EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
- uhub1: 1 port with 1 removable, self powered
- uhub2 at usb2: Allwinner OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
- uhub2: 1 port with 1 removable, self powered
- uhub3 at usb3: Allwinner EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
- uhub3: 1 port with 1 removable, self powered
- uhub4 at usb4: Mentor Graphics MOTG root hub, class 9/0, rev 1.00/1.00, addr 1
- uhub4: 1 port with 1 removable, self powered
- ld0 at sdmmc0: <0x1b:0x534d:00000:0x10:0x89e23086:0x0ec>
- ld0: 7655 MB, 3888 cyl, 64 head, 63 sec, 512 bytes/sect x 15677440 sectors
- ld0: 4-bit width, bus clock 50.000 MHz
- ehci1: handing over low speed device on port 1 to ohci1
- rum0 at uhub1 port 1
- rum0: Ralink 802.11 bg WLAN, rev 2.00/0.01, addr 2
- rum0: MAC/BBP RT2573 (rev 0x2573a), RF RT2528, address 00:0e:2e:e3:a6:43
- rum0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
- rum0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
- boot device: ld0
- root on ld0a dumps on ld0b
- root file system type: ffs
- kern.module.path=/stand/evbarm/7.99.5/modules
- WARNING: preposterous TOD clock time
- WARNING: using filesystem time
- WARNING: CHECK AND RESET THE DATE!
- uhidev0 at uhub2 port 1 configuration 1 interface 0
- uhidev0: Cherry Mikroschalter My6000 keyboard, rev 2.00/1.00, addr 2, iclass 3/1
- ukbd0 at uhidev0: 8 modifier keys, 6 key codes
- wskbd0 at ukbd0: console keyboard, using wsdisplay0
- wsdisplay0: screen 4 added (default, vt100 emulation)
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement