elastix

Linux version 2.6.39 (root@pbxserv) (gcc version 4.1.2 20080704 (Red Hat 4.1.2-55)) #2 SMP Mon Mar 30 20:26:01 ALMT 2015
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
 BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
 BIOS-e820: 000000001fff0000 - 000000001fff3000 (ACPI NVS)
 BIOS-e820: 000000001fff3000 - 0000000020000000 (ACPI data)
 BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
Notice: NX (Execute Disable) protection missing in CPU!
DMI 2.2 present.
DMI:    /i815E-ITE8870, BIOS 6.00 PG 08/09/2002
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
last_pfn = 0x1fff0 max_arch_pfn = 0x100000
MTRR default type: uncachable
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-BFFFF uncachable
  C0000-C9FFF write-protect
  CA000-F7FFF uncachable
  F8000-FBFFF write-through
  FC000-FFFFF uncachable
MTRR variable ranges enabled:
  0 base 000000000 mask FE0000000 write-back
  1 disabled
  2 disabled
  3 disabled
  4 disabled
  5 disabled
  6 disabled
  7 disabled
PAT not supported by CPU.
initial memory mapped : 0 - 00c00000
Base memory trampoline at [c009b000] 9b000 size 16384
init_memory_mapping: 0000000000000000-000000001fff0000
 0000000000 - 0000400000 page 4k
 0000400000 - 001fc00000 page 2M
 001fc00000 - 001fff0000 page 4k
kernel direct mapping tables up to 1fff0000 @ bfb000-c00000
RAMDISK: 1fc8f000 - 1ffe0000
ACPI: RSDP 000f7a60 00014 (v00 IntelR)
ACPI: RSDT 1fff3000 00028 (v01 IntelR AWRDACPI 42302E31 AWRD 00000000)
ACPI: FACP 1fff3040 00074 (v01 IntelR AWRDACPI 42302E31 AWRD 00000000)
ACPI: DSDT 1fff30c0 03902 (v01 INTELR AWRDACPI 00001000 MSFT 0100000C)
ACPI: FACS 1fff0000 00040
0MB HIGHMEM available.
511MB LOWMEM available.
  mapped low ram: 0 - 1fff0000
  low ram: 0 - 1fff0000
Zone PFN ranges:
  DMA      0x00000010 -> 0x00001000
  Normal   0x00001000 -> 0x0001fff0
  HighMem  empty
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
    0: 0x00000010 -> 0x000000a0
    0: 0x00000100 -> 0x0001fff0
On node 0 totalpages: 130944
free_area_init_node: node 0, pgdat c07ee3c0, node_mem_map df88f200
  DMA zone: 32 pages used for memmap
  DMA zone: 0 pages reserved
  DMA zone: 3952 pages, LIFO batch:0
  Normal zone: 992 pages used for memmap
  Normal zone: 125968 pages, LIFO batch:31
Using APIC driver default
ACPI: PM-Timer IO Port: 0x4008
SMP: Allowing 1 CPUs, 0 hotplug CPUs
Local APIC disabled by BIOS -- you can enable it with "lapic"
APIC: disable apic facility
APIC: switched to apic NOOP
nr_irqs_gsi: 16
Allocating PCI resources starting at 20000000 (gap: 20000000:dfb00000)
setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1
PERCPU: Embedded 12 pages/cpu @df400000 s26048 r0 d23104 u4194304
pcpu-alloc: s26048 r0 d23104 u4194304 alloc=1*4194304
pcpu-alloc: [0] 0
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 129920
Kernel command line: ro root=/dev/VolGroup00/LogVol00 video=hyper_fb:1024x768
PID hash table entries: 2048 (order: 1, 8192 bytes)
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Initializing CPU#0
Initializing HighMem for node 0 (00000000:00000000)
Memory: 510392k/524224k available (2708k kernel code, 13384k reserved, 1343k data, 412k init, 0k highmem)
virtual kernel memory layout:
    fixmap  : 0xffe6f000 - 0xfffff000   (1600 kB)
    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
    vmalloc : 0xe07f0000 - 0xff7fe000   ( 496 MB)
    lowmem  : 0xc0000000 - 0xdfff0000   ( 511 MB)
      .init : 0xc07f6000 - 0xc085d000   ( 412 kB)
      .data : 0xc06a5296 - 0xc07f5140   (1343 kB)
      .text : 0xc0400000 - 0xc06a5296   (2708 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
Hierarchical RCU implementation.
NR_IRQS:512
CPU 0 irqstacks, hard=df008000 soft=df00a000
Console: colour VGA+ 80x25
console [tty0] enabled
Fast TSC calibration using PIT
Detected 1312.002 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 2624.00 BogoMIPS (lpj=1312002)
pid_max: default: 32768 minimum: 301
Security Framework initialized
SELinux:  Initializing.
SELinux:  Starting in permissive mode
Mount-cache hash table entries: 512
mce: CPU supports 5 MCE banks
SMP alternatives: switching to UP code
Freeing SMP alternatives: 24k freed
ACPI: Core revision 20110316
ACPI Warning: Detected an unsupported executable opcode at module-level: [0x007B] at table offset 0x00AB (20110316/psloop-526)
ACPI Warning: Detected an unsupported executable opcode at module-level: [0x007B] at table offset 0x00B0 (20110316/psloop-526)
ACPI: setting ELCR to 0200 (from 1a20)
weird, boot CPU (#0) not listed by the BIOS.
SMP motherboard not detected.
Local APIC not detected. Using dummy APIC emulation.
SMP disabled
Performance Events:
no APIC, boot with the "lapic" boot parameter to force-enable it.
no hardware sampling interrupt available.
p6 PMU driver.
... version:                0
... bit width:              32
... generic registers:      2
... value mask:             00000000ffffffff
... max period:             000000007fffffff
... fixed-purpose events:   0
... event mask:             0000000000000003
Brought up 1 CPUs
Total of 1 processors activated (2624.00 BogoMIPS).
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfb040, last bus=2
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S5)
ACPI: Using PIC for interrupt routing
ACPI: No dock devices found.
PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
pci_root PNP0A03:00: host bridge window [io  0x0000-0x0cf7] (ignored)
pci_root PNP0A03:00: host bridge window [io  0x0d00-0x3fff] (ignored)
pci_root PNP0A03:00: host bridge window [io  0x40f8-0x4fff] (ignored)
pci_root PNP0A03:00: host bridge window [io  0x5000-0xffff] (ignored)
pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff] (ignored)
pci_root PNP0A03:00: host bridge window [mem 0x20000000-0xffefffff] (ignored)
pci 0000:00:00.0: [8086:1130] type 0 class 0x000600
pci 0000:00:00.0: reg 10: [mem 0xd0000000-0xd1ffffff pref]
pci 0000:00:01.0: [8086:1131] type 1 class 0x000604
pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604
pci 0000:00:1f.0: [8086:2440] type 0 class 0x000601
pci 0000:00:1f.0: quirk: [io  0x4000-0x407f] claimed by ICH4 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: [io  0x4080-0x40bf] claimed by ICH4 GPIO
pci 0000:00:1f.1: [8086:244b] type 0 class 0x000101
pci 0000:00:1f.1: reg 20: [io  0xf000-0xf00f]
pci 0000:00:1f.2: [8086:2442] type 0 class 0x000c03
pci 0000:00:1f.2: reg 20: [io  0xd000-0xd01f]
pci 0000:00:1f.3: [8086:2443] type 0 class 0x000c05
pci 0000:00:1f.3: reg 20: [io  0x5000-0x500f]
pci 0000:00:1f.4: [8086:2444] type 0 class 0x000c03
pci 0000:00:1f.4: reg 20: [io  0xd400-0xd41f]
pci 0000:00:1f.5: [8086:2445] type 0 class 0x000401
pci 0000:00:1f.5: reg 10: [io  0xd800-0xd8ff]
pci 0000:00:1f.5: reg 14: [io  0xdc00-0xdc3f]
pci 0000:01:00.0: [10de:002d] type 0 class 0x000300
pci 0000:01:00.0: reg 10: [mem 0xd6000000-0xd6ffffff]
pci 0000:01:00.0: reg 14: [mem 0xd4000000-0xd5ffffff pref]
pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0000ffff pref]
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0:   bridge window [io  0xf000-0x0000] (disabled)
pci 0000:00:01.0:   bridge window [mem 0xd6000000-0xd7ffffff]
pci 0000:00:01.0:   bridge window [mem 0xd4000000-0xd5ffffff pref]
pci 0000:02:03.0: [10ec:8139] type 0 class 0x000200
pci 0000:02:03.0: reg 10: [io  0xc000-0xc0ff]
pci 0000:02:03.0: reg 14: [mem 0xd8000000-0xd80000ff]
pci 0000:02:03.0: supports D1 D2
pci 0000:02:03.0: PME# supported from D1 D2 D3hot D3cold
pci 0000:02:03.0: PME# disabled
pci 0000:00:1e.0: PCI bridge to [bus 02-02] (subtractive decode)
pci 0000:00:1e.0:   bridge window [io  0xc000-0xcfff]
pci 0000:00:1e.0:   bridge window [mem 0xd8000000-0xd80fffff]
pci 0000:00:1e.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:1e.0:   bridge window [io  0x0000-0xffff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0x00000000-0xffffffff] (subtractive decode)
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11 *12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11 12 14 15) *9
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 32 bytes
reserve RAM buffer: 000000001fff0000 - 000000001fffffff
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4
NetLabel:  unlabeled traffic allowed by default
Switching to clocksource pit
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: [mem 0x000ca800-0x000cbfff]
pnp 00:00: [mem 0x000f0000-0x000f7fff]
pnp 00:00: [mem 0x000f8000-0x000fbfff]
pnp 00:00: [mem 0x000fc000-0x000fffff]
pnp 00:00: [mem 0x1fff0000-0x1fffffff]
pnp 00:00: [mem 0x00000000-0x0009ffff]
pnp 00:00: [mem 0x00100000-0x1ffeffff]
pnp 00:00: [mem 0xfee00000-0xfee00fff]
pnp 00:00: [mem 0xffb00000-0xffb7ffff]
pnp 00:00: [mem 0xfff00000-0xffffffff]
pnp 00:00: [mem 0x000e0000-0x000effff]
system 00:00: [mem 0x000ca800-0x000cbfff] has been reserved
system 00:00: [mem 0x000f0000-0x000f7fff] could not be reserved
system 00:00: [mem 0x000f8000-0x000fbfff] could not be reserved
system 00:00: [mem 0x000fc000-0x000fffff] could not be reserved
system 00:00: [mem 0x1fff0000-0x1fffffff] could not be reserved
system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:00: [mem 0x00100000-0x1ffeffff] could not be reserved
system 00:00: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:00: [mem 0xffb00000-0xffb7ffff] has been reserved
system 00:00: [mem 0xfff00000-0xffffffff] has been reserved
system 00:00: [mem 0x000e0000-0x000effff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:01: [bus 00-ff]
pnp 00:01: [io  0x0cf8-0x0cff]
pnp 00:01: [io  0x0000-0x0cf7 window]
pnp 00:01: [io  0x0d00-0x3fff window]
pnp 00:01: [io  0x4000-0x40f7]
pnp 00:01: [io  0x40f8-0x4fff window]
pnp 00:01: [io  0x5000-0xffff window]
pnp 00:01: [mem 0x000a0000-0x000bffff window]
pnp 00:01: [mem 0x000c0000-0x000dffff window]
pnp 00:01: [mem 0x20000000-0xffefffff window]
pnp 00:01: Plug and Play ACPI device, IDs PNP0a03 (active)
pnp 00:02: [io  0x0010-0x001f]
pnp 00:02: [io  0x0022-0x003f]
pnp 00:02: [io  0x0044-0x005f]
pnp 00:02: [io  0x0062-0x0063]
pnp 00:02: [io  0x0065-0x006f]
pnp 00:02: [io  0x0074-0x007f]
pnp 00:02: [io  0x0091-0x0093]
pnp 00:02: [io  0x00a2-0x00bf]
pnp 00:02: [io  0x00e0-0x00ef]
pnp 00:02: [io  0x04d0-0x04d1]
pnp 00:02: [io  0x0290-0x029f]
pnp 00:02: [io  0x0800-0x0805]
system 00:02: [io  0x04d0-0x04d1] has been reserved
system 00:02: [io  0x0290-0x029f] has been reserved
system 00:02: [io  0x0800-0x0805] has been reserved
system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:03: [dma 4]
pnp 00:03: [io  0x0000-0x000f]
pnp 00:03: [io  0x0080-0x0090]
pnp 00:03: [io  0x0094-0x009f]
pnp 00:03: [io  0x00c0-0x00df]
pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:04: [io  0x0070-0x0073]
pnp 00:04: [irq 8]
pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:05: [io  0x0061]
pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:06: [io  0x00f0-0x00ff]
pnp 00:06: [irq 13]
pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:07: [io  0x03f0-0x03f5]
pnp 00:07: [io  0x03f7]
pnp 00:07: [irq 6]
pnp 00:07: [dma 2]
pnp 00:07: Plug and Play ACPI device, IDs PNP0700 (active)
pnp 00:08: [io  0x03f8-0x03ff]
pnp 00:08: [irq 4]
pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:09: [io  0x02f8-0x02ff]
pnp 00:09: [irq 3]
pnp 00:09: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:0a: [io  0x0378-0x037f]
pnp 00:0a: [io  0x0778-0x077b]
pnp 00:0a: [irq 7]
pnp 00:0a: [dma 3]
pnp 00:0a: Plug and Play ACPI device, IDs PNP0401 (active)
pnp 00:0b: [io  0x0060]
pnp 00:0b: [io  0x0064]
pnp 00:0b: [irq 1]
pnp 00:0b: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:0c: [io  0x0330-0x0331]
pnp 00:0c: [irq 10]
pnp 00:0c: Plug and Play ACPI device, IDs PNPb006 (active)
pnp 00:0d: [io  0x0201]
pnp 00:0d: Plug and Play ACPI device, IDs PNPb02f (active)
pnp: PnP ACPI: found 14 devices
ACPI: ACPI bus type pnp unregistered
Switching to clocksource acpi_pm
pci 0000:01:00.0: BAR 6: assigned [mem 0xd7000000-0xd700ffff pref]
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0:   bridge window [io  disabled]
pci 0000:00:01.0:   bridge window [mem 0xd6000000-0xd7ffffff]
pci 0000:00:01.0:   bridge window [mem 0xd4000000-0xd5ffffff pref]
pci 0000:00:1e.0: PCI bridge to [bus 02-02]
pci 0000:00:1e.0:   bridge window [io  0xc000-0xcfff]
pci 0000:00:1e.0:   bridge window [mem 0xd8000000-0xd80fffff]
pci 0000:00:1e.0:   bridge window [mem pref disabled]
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 0 [io  0x0000-0xffff]
pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff]
pci_bus 0000:01: resource 1 [mem 0xd6000000-0xd7ffffff]
pci_bus 0000:01: resource 2 [mem 0xd4000000-0xd5ffffff pref]
pci_bus 0000:02: resource 0 [io  0xc000-0xcfff]
pci_bus 0000:02: resource 1 [mem 0xd8000000-0xd80fffff]
pci_bus 0000:02: resource 4 [io  0x0000-0xffff]
pci_bus 0000:02: resource 5 [mem 0x00000000-0xffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
TCP established hash table entries: 16384 (order: 5, 131072 bytes)
TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
TCP reno registered
UDP hash table entries: 256 (order: 1, 8192 bytes)
UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: Boot video device
PCI: CLS 0 bytes, default 32
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 3396k freed
apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
apm: overridden by ACPI.
audit: initializing netlink socket (disabled)
type=2000 audit(1427900462.369:1): initialized
HugeTLB registered 4 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
msgmni has been set to 1003
SELinux:  Registering netfilter hooks
cryptomgr_test used greatest stack depth: 7784 bytes left
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
ACPI: Fan [FAN] (on)
ACPI: acpi_idle registered with cpuidle
Marking TSC unstable due to TSC halts in idle
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [THRM] (41 C)
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
agpgart-intel 0000:00:00.0: Intel i815 Chipset
agpgart-intel 0000:00:00.0: AGP aperture is 32M @ 0xd0000000
brd: module loaded
Uniform Multi-Platform E-IDE driver
piix 0000:00:1f.1: IDE controller (0x8086:0x244b rev 0x12)
piix 0000:00:1f.1: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0xf000-0xf007
    ide1: BM-DMA at 0xf008-0xf00f
Probing IDE interface ide0...
Probing IDE interface ide1...
hdc: SAMSUNG SV0411N, ATA DISK drive
hdd: PHILIPS DVDR1660P1, ATAPI CD/DVD-ROM drive
hdc: host max PIO4 wanted PIO255(auto-tune) selected PIO4
hdc: UDMA/100 mode selected
hdd: host max PIO4 wanted PIO255(auto-tune) selected PIO4
hdd: UDMA/33 mode selected
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports
ide-gd driver 1.18
hdc: max request size: 512KiB
hdc: 78242976 sectors (40060 MB) w/2048KiB Cache, CHS=16383/255/63
hdc: cache flushes supported
hdc: detected capacity change from 0 to 40060403712
 hdc: hdc1 hdc2
i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
serio: i8042 KBD port at 0x60,0x64 irq 1
mousedev: PS/2 mouse device common for all mice
cpuidle: using governor ladder
EFI Variables Facility v0.08 2004-May-17
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
TCP bic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
Registering the dns_resolver key type
Using IPI No-Shortcut mode
registered taskstats version 1
Initializing network drop monitor service
Freeing unused kernel memory: 412k freed
Write protecting the kernel text: 2712k
Write protecting the kernel read-only data: 1072k
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
nash-hotplug (25): /proc/25/oom_adj is deprecated, please use /proc/25/oom_score_adj instead.
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
insmod used greatest stack depth: 7176 bytes left
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
uhci_hcd 0000:00:1f.2: PCI INT D -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11
uhci_hcd 0000:00:1f.2: setting latency timer to 64
uhci_hcd 0000:00:1f.2: UHCI Host Controller
uhci_hcd 0000:00:1f.2: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:1f.2: irq 11, io base 0x0000d000
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ACPI: PCI Interrupt Link [LNK1] enabled at IRQ 11
uhci_hcd 0000:00:1f.4: PCI INT C -> Link[LNK1] -> GSI 11 (level, low) -> IRQ 11
uhci_hcd 0000:00:1f.4: setting latency timer to 64
uhci_hcd 0000:00:1f.4: UHCI Host Controller
uhci_hcd 0000:00:1f.4: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1f.4: irq 11, io base 0x0000d400
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
insmod used greatest stack depth: 6840 bytes left
SCSI subsystem initialized
libata version 3.00 loaded.
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com
EXT3-fs: barriers not enabled
kjournald starting.  Commit interval 5 seconds
EXT3-fs (dm-0): mounted filesystem with ordered data mode
SELinux:  Disabled at runtime.
SELinux:  Unregistering netfilter hooks
type=1404 audit(1427900486.826:2): selinux=0 auid=4294967295 ses=4294967295
uname used greatest stack depth: 6720 bytes left
mount used greatest stack depth: 6168 bytes left
awk used greatest stack depth: 6164 bytes left
modprobe used greatest stack depth: 6036 bytes left
intel_rng: FWH not detected
input: PC Speaker as /devices/platform/pcspkr/input/input1
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 5
PCI: setting IRQ 5 as level-triggered
i801_smbus 0000:00:1f.3: PCI INT B -> Link[LNKB] -> GSI 5 (level, low) -> IRQ 5
FDC 0 is a post-1991 82077
8139cp: 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
8139cp 0000:02:03.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
ACPI: Power Button [PWRB]
input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3
ACPI: Sleep Button [SLPB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
ACPI: Power Button [PWRF]
8139too: 8139too Fast Ethernet driver 0.9.28
8139too 0000:02:03.0: PCI INT A -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11
rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, 242 bytes nvram
8139too 0000:02:03.0: eth0: RealTek RTL8139 at 0xe1198000, 00:0e:2e:35:e1:a0, IRQ 11
parport_pc 00:0a: reported by Plug and Play ACPI
parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
gameport gameport0: NS558 PnP Gameport is pnp00:0d/gameport0, io 0x201, speed 978kHz
ide-cd driver 5.00
ide-cd: hdd: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache
cdrom: Uniform CD-ROM driver Revision: 3.20
Intel ICH 0000:00:1f.5: PCI INT B -> Link[LNKB] -> GSI 5 (level, low) -> IRQ 5
Intel ICH 0000:00:1f.5: setting latency timer to 64
intel8x0_measure_ac97_clock: measured 50638 usecs (2434 samples)
intel8x0: clocking to 48000
lp0: using parport0 (interrupt-driven).
lp0: console ready
md: Autodetecting RAID arrays.
md: Scanned 0 and added 0 devices.
md: autorun ...
md: ... autorun DONE.
device-mapper: multipath: version 1.3.0 loaded
EXT3-fs (dm-0): using internal journal
EXT3-fs: barriers not enabled
kjournald starting.  Commit interval 5 seconds
EXT3-fs (hdc1): using internal journal
EXT3-fs (hdc1): mounted filesystem with ordered data mode
Adding 1048572k swap on /dev/VolGroup00/LogVol01.  Priority:-1 extents:1 across:1048572k
rc.sysinit used greatest stack depth: 5976 bytes left
warning: process `kudzu' used the deprecated sysctl system call with 1.23.
Loading iSCSI transport class v2.0-870.
libcxgbi:libcxgbi_init_module: tag itt 0x1fff, 13 bits, age 0xf, 4 bits.
libcxgbi:ddp_setup_host_page_size: system PAGE 4096, ddp idx 0.
Chelsio T3 iSCSI Driver cxgb3i v2.0.0 (Jun. 2010)
iscsi: registered transport (cxgb3i)
IPv6: Loaded, but administratively disabled, reboot required to enable
cnic: Broadcom NetXtreme II CNIC Driver cnic v2.2.13 (Jan 31, 2011)
Broadcom NetXtreme II iSCSI Driver bnx2i v2.6.2.3 (Dec 31, 2010)
iscsi: registered transport (bnx2i)
iscsi: registered transport (tcp)
iscsi: registered transport (iser)
iscsi: registered transport (be2iscsi)
8139too 0000:02:03.0: eth0: link up, 100Mbps, full-duplex, lpa 0xC5E1
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
warning: `dbus-daemon' uses 32-bit capabilities (legacy support in use)