Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- [ 0.000000] Initializing cgroup subsys cpuset
- [ 0.000000] Initializing cgroup subsys cpu
- [ 0.000000] Linux version 2.6.32-trunk-686 (Debian 2.6.32-5) (ben@decadent.org.uk) (gcc version 4.3.4 (Debian 4.3.4-6) ) #1 SMP Sun Jan 10 06:32:16 UTC 2010
- [ 0.000000] KERNEL supported cpus:
- [ 0.000000] Intel GenuineIntel
- [ 0.000000] AMD AuthenticAMD
- [ 0.000000] NSC Geode by NSC
- [ 0.000000] Cyrix CyrixInstead
- [ 0.000000] Centaur CentaurHauls
- [ 0.000000] Transmeta GenuineTMx86
- [ 0.000000] Transmeta TransmetaCPU
- [ 0.000000] UMC UMC UMC UMC
- [ 0.000000] BIOS-provided physical RAM map:
- [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
- [ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
- [ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
- [ 0.000000] BIOS-e820: 0000000000100000 - 0000000037fa0000 (usable)
- [ 0.000000] BIOS-e820: 0000000037fa0000 - 0000000037fae000 (ACPI data)
- [ 0.000000] BIOS-e820: 0000000037fae000 - 0000000037ff0000 (ACPI NVS)
- [ 0.000000] BIOS-e820: 0000000037ff0000 - 0000000037ffe000 (reserved)
- [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
- [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
- [ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
- [ 0.000000] DMI present.
- [ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it.
- [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
- [ 0.000000] last_pfn = 0x37fa0 max_arch_pfn = 0x100000
- [ 0.000000] MTRR default type: uncachable
- [ 0.000000] MTRR fixed ranges enabled:
- [ 0.000000] 00000-9FFFF write-back
- [ 0.000000] A0000-EFFFF uncachable
- [ 0.000000] F0000-FFFFF write-protect
- [ 0.000000] MTRR variable ranges enabled:
- [ 0.000000] 0 base 0000000000 mask FFE0000000 write-back
- [ 0.000000] 1 base 0020000000 mask FFF0000000 write-back
- [ 0.000000] 2 base 0030000000 mask FFF8000000 write-back
- [ 0.000000] 3 disabled
- [ 0.000000] 4 disabled
- [ 0.000000] 5 disabled
- [ 0.000000] 6 disabled
- [ 0.000000] 7 disabled
- [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
- [ 0.000000] initial memory mapped : 0 - 01800000
- [ 0.000000] init_memory_mapping: 0000000000000000-00000000373fe000
- [ 0.000000] 0000000000 - 0000400000 page 4k
- [ 0.000000] 0000400000 - 0037000000 page 2M
- [ 0.000000] 0037000000 - 00373fe000 page 4k
- [ 0.000000] kernel direct mapping tables up to 373fe000 @ 10000-16000
- [ 0.000000] RAMDISK: 2958e000 - 29ff7ca3
- [ 0.000000] ACPI: RSDP 000fa8a0 00014 (v00 ACPIAM)
- [ 0.000000] ACPI: RSDT 37fa0000 00038 (v01 110607 RSDT1504 20071106 MSFT 00000097)
- [ 0.000000] ACPI: FACP 37fa0200 00084 (v01 110607 FACP1504 20071106 MSFT 00000097)
- [ 0.000000] ACPI: DSDT 37fa0450 050E1 (v01 1ADQX 1ADQX008 00000008 INTL 20051117)
- [ 0.000000] ACPI: FACS 37fae000 00040
- [ 0.000000] ACPI: APIC 37fa0390 00080 (v01 110607 APIC1504 20071106 MSFT 00000097)
- [ 0.000000] ACPI: MCFG 37fa0410 0003C (v01 110607 OEMMCFG 20071106 MSFT 00000097)
- [ 0.000000] ACPI: OEMB 37fae040 00072 (v01 110607 OEMB1504 20071106 MSFT 00000097)
- [ 0.000000] ACPI: NVHD 37fae0c0 00554 (v01 110607 NVHDCP 20071106 MSFT 00000097)
- [ 0.000000] ACPI: Local APIC address 0xfee00000
- [ 0.000000] 11MB HIGHMEM available.
- [ 0.000000] 883MB LOWMEM available.
- [ 0.000000] mapped low ram: 0 - 373fe000
- [ 0.000000] low ram: 0 - 373fe000
- [ 0.000000] node 0 low ram: 00000000 - 373fe000
- [ 0.000000] node 0 bootmap 00012000 - 00018e80
- [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00373fe000]
- [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
- [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
- [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
- [ 0.000000] #3 [0001000000 - 00014a1334] TEXT DATA BSS ==> [0001000000 - 00014a1334]
- [ 0.000000] #4 [002958e000 - 0029ff7ca3] RAMDISK ==> [002958e000 - 0029ff7ca3]
- [ 0.000000] #5 [000009f000 - 0000100000] BIOS reserved ==> [000009f000 - 0000100000]
- [ 0.000000] #6 [00014a2000 - 00014a8180] BRK ==> [00014a2000 - 00014a8180]
- [ 0.000000] #7 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000]
- [ 0.000000] #8 [0000012000 - 0000019000] BOOTMAP ==> [0000012000 - 0000019000]
- [ 0.000000] found SMP MP-table at [c00ff780] ff780
- [ 0.000000] Zone PFN ranges:
- [ 0.000000] DMA 0x00000010 -> 0x00001000
- [ 0.000000] Normal 0x00001000 -> 0x000373fe
- [ 0.000000] HighMem 0x000373fe -> 0x00037fa0
- [ 0.000000] Movable zone start PFN for each node
- [ 0.000000] early_node_map[2] active PFN ranges
- [ 0.000000] 0: 0x00000010 -> 0x0000009f
- [ 0.000000] 0: 0x00000100 -> 0x00037fa0
- [ 0.000000] On node 0 totalpages: 229167
- [ 0.000000] free_area_init_node: node 0, pgdat c138edc0, node_mem_map c14aa200
- [ 0.000000] DMA zone: 32 pages used for memmap
- [ 0.000000] DMA zone: 0 pages reserved
- [ 0.000000] DMA zone: 3951 pages, LIFO batch:0
- [ 0.000000] Normal zone: 1736 pages used for memmap
- [ 0.000000] Normal zone: 220470 pages, LIFO batch:31
- [ 0.000000] HighMem zone: 24 pages used for memmap
- [ 0.000000] HighMem zone: 2954 pages, LIFO batch:0
- [ 0.000000] Using APIC driver default
- [ 0.000000] Nvidia board detected. Ignoring ACPI timer override.
- [ 0.000000] If you got timer trouble try acpi_use_timer_override
- [ 0.000000] Detected use of extended apic ids on hypertransport bus
- [ 0.000000] ACPI: PM-Timer IO Port: 0x2008
- [ 0.000000] ACPI: Local APIC address 0xfee00000
- [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
- [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
- [ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
- [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
- [ 0.000000] ACPI: BIOS IRQ0 pin2 override ignored.
- [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
- [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
- [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
- [ 0.000000] ACPI: IRQ9 used by override.
- [ 0.000000] ACPI: IRQ14 used by override.
- [ 0.000000] ACPI: IRQ15 used by override.
- [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
- [ 0.000000] Using ACPI (MADT) for SMP configuration information
- [ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
- [ 0.000000] nr_irqs_gsi: 24
- [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
- [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000
- [ 0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
- [ 0.000000] Allocating PCI resources starting at 37ffe000 (gap: 37ffe000:c6c02000)
- [ 0.000000] Booting paravirtualized kernel on bare hardware
- [ 0.000000] NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:4 nr_node_ids:1
- [ 0.000000] PERCPU: Embedded 14 pages/cpu @c1c00000 s34072 r0 d23272 u1048576
- [ 0.000000] pcpu-alloc: s34072 r0 d23272 u1048576 alloc=1*4194304
- [ 0.000000] pcpu-alloc: [0] 0 1 2 3
- [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 227375
- [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-trunk-686 root=UUID=1efd23b3-5dff-4358-8d2b-9b6260f86381 ro quiet vga=792
- [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
- [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
- [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
- [ 0.000000] Enabling fast FPU save and restore... done.
- [ 0.000000] Enabling unmasked SIMD FPU exception support... done.
- [ 0.000000] Initializing CPU#0
- [ 0.000000] Initializing HighMem for node 0 (000373fe:00037fa0)
- [ 0.000000] Memory: 892460k/917120k available (2414k kernel code, 23668k reserved, 1266k data, 368k init, 11912k highmem)
- [ 0.000000] virtual kernel memory layout:
- [ 0.000000] fixmap : 0xffd56000 - 0xfffff000 (2724 kB)
- [ 0.000000] pkmap : 0xff400000 - 0xff800000 (4096 kB)
- [ 0.000000] vmalloc : 0xf7bfe000 - 0xff3fe000 ( 120 MB)
- [ 0.000000] lowmem : 0xc0000000 - 0xf73fe000 ( 883 MB)
- [ 0.000000] .init : 0xc1399000 - 0xc13f5000 ( 368 kB)
- [ 0.000000] .data : 0xc125bb11 - 0xc1398560 (1266 kB)
- [ 0.000000] .text : 0xc1000000 - 0xc125bb11 (2414 kB)
- [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
- [ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
- [ 0.000000] Hierarchical RCU implementation.
- [ 0.000000] NR_IRQS:1280
- [ 0.000000] spurious 8259A interrupt: IRQ7.
- [ 0.000000] Console: colour dummy device 80x25
- [ 0.000000] console [tty0] enabled
- [ 0.000000] Fast TSC calibration using PIT
- [ 0.000000] Detected 2200.039 MHz processor.
- [ 0.004003] Calibrating delay loop (skipped), value calculated using timer frequency.. 4400.07 BogoMIPS (lpj=8800156)
- [ 0.004019] Security Framework initialized
- [ 0.004023] SELinux: Disabled at boot.
- [ 0.004029] Mount-cache hash table entries: 512
- [ 0.004140] Initializing cgroup subsys ns
- [ 0.004143] Initializing cgroup subsys cpuacct
- [ 0.004146] Initializing cgroup subsys devices
- [ 0.004148] Initializing cgroup subsys freezer
- [ 0.004150] Initializing cgroup subsys net_cls
- [ 0.004166] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
- [ 0.004168] CPU: L2 Cache: 512K (64 bytes/line)
- [ 0.004171] CPU: Physical Processor ID: 0
- [ 0.004172] CPU: Processor Core ID: 0
- [ 0.004176] mce: CPU supports 5 MCE banks
- [ 0.004185] using C1E aware idle routine
- [ 0.004191] Performance Events: AMD PMU driver.
- [ 0.004196] ... version: 0
- [ 0.004197] ... bit width: 48
- [ 0.004199] ... generic registers: 4
- [ 0.004200] ... value mask: 0000ffffffffffff
- [ 0.004202] ... max period: 00007fffffffffff
- [ 0.004204] ... fixed-purpose events: 0
- [ 0.004206] ... event mask: 000000000000000f
- [ 0.004209] Checking 'hlt' instruction... OK.
- [ 0.020869] ACPI: Core revision 20090903
- [ 0.028001] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1
- [ 0.067765] CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 4200+ stepping 02
- [ 0.068001] Booting processor 1 APIC 0x1 ip 0x6000
- [ 0.008000] Initializing CPU#1
- [ 0.008000] Calibrating delay using timer specific routine.. 4400.26 BogoMIPS (lpj=8800530)
- [ 0.008000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
- [ 0.008000] CPU: L2 Cache: 512K (64 bytes/line)
- [ 0.008000] CPU: Physical Processor ID: 0
- [ 0.008000] CPU: Processor Core ID: 1
- [ 0.152057] CPU1: AMD Athlon(tm) 64 X2 Dual Core Processor 4200+ stepping 02
- [ 0.152162] Brought up 2 CPUs
- [ 0.152165] Total of 2 processors activated (8800.34 BogoMIPS).
- [ 0.152357] CPU0 attaching sched-domain:
- [ 0.152360] domain 0: span 0-1 level MC
- [ 0.152362] groups: 0 1
- [ 0.152367] CPU1 attaching sched-domain:
- [ 0.152369] domain 0: span 0-1 level MC
- [ 0.152371] groups: 1 0
- [ 0.152506] devtmpfs: initialized
- [ 0.152859] regulator: core version 0.5
- [ 0.152913] NET: Registered protocol family 16
- [ 0.152991] ACPI: bus type pci registered
- [ 0.153062] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
- [ 0.153065] PCI: Not using MMCONFIG.
- [ 0.153715] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=8
- [ 0.153717] PCI: Using configuration type 1 for base access
- [ 0.154041] bio: create slab <bio-0> at 0
- [ 0.154684] ACPI: EC: Look up EC in DSDT
- [ 0.157844] ACPI: Executed 1 blocks of module-level executable AML code
- [ 0.162726] ACPI: Interpreter enabled
- [ 0.162730] ACPI: (supports S0 S1 S4 S5)
- [ 0.162748] ACPI: Using IOAPIC for interrupt routing
- [ 0.162791] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
- [ 0.167010] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
- [ 0.167012] PCI: Using MMCONFIG for extended config space
- [ 0.174476] ACPI Warning: Incorrect checksum in table [OEMB] - 58, should be 4B (20090903/tbutils-314)
- [ 0.174672] ACPI: No dock devices found.
- [ 0.174982] ACPI: PCI Root Bridge [PCI0] (0000:00)
- [ 0.175157] pci 0000:00:01.0: reg 10 io port: [0x2f00-0x2fff]
- [ 0.175193] pci 0000:00:01.1: reg 10 io port: [0xec00-0xec3f]
- [ 0.175203] pci 0000:00:01.1: reg 20 io port: [0x2d00-0x2d3f]
- [ 0.175208] pci 0000:00:01.1: reg 24 io port: [0x2e00-0x2e3f]
- [ 0.175226] pci 0000:00:01.1: PME# supported from D3hot D3cold
- [ 0.175231] pci 0000:00:01.1: PME# disabled
- [ 0.175256] pci 0000:00:02.0: reg 10 32bit mmio: [0xfebff000-0xfebfffff]
- [ 0.175277] pci 0000:00:02.0: supports D1 D2
- [ 0.175279] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
- [ 0.175282] pci 0000:00:02.0: PME# disabled
- [ 0.175304] pci 0000:00:02.1: reg 10 32bit mmio: [0xfebfec00-0xfebfecff]
- [ 0.175329] pci 0000:00:02.1: supports D1 D2
- [ 0.175332] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
- [ 0.175335] pci 0000:00:02.1: PME# disabled
- [ 0.175360] pci 0000:00:04.0: reg 10 32bit mmio: [0xfebfd000-0xfebfdfff]
- [ 0.175381] pci 0000:00:04.0: supports D1 D2
- [ 0.175383] pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold
- [ 0.175387] pci 0000:00:04.0: PME# disabled
- [ 0.175409] pci 0000:00:04.1: reg 10 32bit mmio: [0xfebfe800-0xfebfe8ff]
- [ 0.175434] pci 0000:00:04.1: supports D1 D2
- [ 0.175436] pci 0000:00:04.1: PME# supported from D0 D1 D2 D3hot D3cold
- [ 0.175440] pci 0000:00:04.1: PME# disabled
- [ 0.175471] pci 0000:00:06.0: reg 20 io port: [0xffa0-0xffaf]
- [ 0.175506] pci 0000:00:07.0: reg 10 32bit mmio: [0xfebf8000-0xfebfbfff]
- [ 0.175531] pci 0000:00:07.0: PME# supported from D3hot D3cold
- [ 0.175534] pci 0000:00:07.0: PME# disabled
- [ 0.175588] pci 0000:00:09.0: reg 10 io port: [0xe480-0xe487]
- [ 0.175592] pci 0000:00:09.0: reg 14 io port: [0xe400-0xe403]
- [ 0.175596] pci 0000:00:09.0: reg 18 io port: [0xe080-0xe087]
- [ 0.175599] pci 0000:00:09.0: reg 1c io port: [0xe000-0xe003]
- [ 0.175603] pci 0000:00:09.0: reg 20 io port: [0xdc00-0xdc0f]
- [ 0.175608] pci 0000:00:09.0: reg 24 32bit mmio: [0xfebf6000-0xfebf7fff]
- [ 0.175645] pci 0000:00:0a.0: reg 10 32bit mmio: [0xfebfc000-0xfebfcfff]
- [ 0.175649] pci 0000:00:0a.0: reg 14 io port: [0xd880-0xd887]
- [ 0.175653] pci 0000:00:0a.0: reg 18 32bit mmio: [0xfebfe400-0xfebfe4ff]
- [ 0.175657] pci 0000:00:0a.0: reg 1c 32bit mmio: [0xfebfe000-0xfebfe00f]
- [ 0.175677] pci 0000:00:0a.0: supports D1 D2
- [ 0.175679] pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold
- [ 0.175684] pci 0000:00:0a.0: PME# disabled
- [ 0.175718] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
- [ 0.175721] pci 0000:00:0b.0: PME# disabled
- [ 0.175753] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
- [ 0.175756] pci 0000:00:0c.0: PME# disabled
- [ 0.175789] pci 0000:00:0d.0: PME# supported from D0 D1 D2 D3hot D3cold
- [ 0.175792] pci 0000:00:0d.0: PME# disabled
- [ 0.175823] pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold
- [ 0.175825] pci 0000:00:0e.0: PME# disabled
- [ 0.175857] pci 0000:00:0f.0: PME# supported from D0 D1 D2 D3hot D3cold
- [ 0.175859] pci 0000:00:0f.0: PME# disabled
- [ 0.175891] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
- [ 0.175894] pci 0000:00:10.0: PME# disabled
- [ 0.175925] pci 0000:00:11.0: PME# supported from D0 D1 D2 D3hot D3cold
- [ 0.175928] pci 0000:00:11.0: PME# disabled
- [ 0.175945] pci 0000:00:12.0: reg 10 32bit mmio: [0xfd000000-0xfdffffff]
- [ 0.175950] pci 0000:00:12.0: reg 14 64bit mmio pref: [0xd0000000-0xdfffffff]
- [ 0.175955] pci 0000:00:12.0: reg 1c 64bit mmio: [0xfc000000-0xfcffffff]
- [ 0.175960] pci 0000:00:12.0: reg 30 32bit mmio pref: [0xfebc0000-0xfebdffff]
- [ 0.176073] pci 0000:00:08.0: transparent bridge
- [ 0.176314] pci_bus 0000:00: on NUMA node 0
- [ 0.176318] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
- [ 0.176481] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
- [ 0.176555] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR10._PRT]
- [ 0.176605] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR11._PRT]
- [ 0.189582] ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *0, disabled.
- [ 0.189776] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *0, disabled.
- [ 0.189969] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled.
- [ 0.190160] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled.
- [ 0.190352] ACPI: PCI Interrupt Link [LNEA] (IRQs 16 17 18 19) *0, disabled.
- [ 0.190544] ACPI: PCI Interrupt Link [LNEB] (IRQs 16 17 18 19) *0, disabled.
- [ 0.190736] ACPI: PCI Interrupt Link [LNEC] (IRQs 16 17 18 19) *0, disabled.
- [ 0.190926] ACPI: PCI Interrupt Link [LNED] (IRQs 16 17 18 19) *0, disabled.
- [ 0.191122] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *10
- [ 0.191316] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *11
- [ 0.191511] ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *11
- [ 0.191706] ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *10
- [ 0.191902] ACPI: PCI Interrupt Link [SGRU] (IRQs 20 21 22 23) *10
- [ 0.192105] ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *11
- [ 0.192297] ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *0, disabled.
- [ 0.192494] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *5
- [ 0.192716] ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled.
- [ 0.192912] ACPI: PCI Interrupt Link [UB11] (IRQs 20 21 22 23) *10
- [ 0.193109] ACPI: PCI Interrupt Link [UB12] (IRQs 20 21 22 23) *10
- [ 0.193207] vgaarb: device added: PCI:0000:00:12.0,decodes=io+mem,owns=io+mem,locks=none
- [ 0.193211] vgaarb: loaded
- [ 0.193283] PCI: Using ACPI for IRQ routing
- [ 0.193427] Switching to clocksource jiffies
- [ 0.194474] pnp: PnP ACPI init
- [ 0.194484] ACPI: bus type pnp registered
- [ 0.199274] pnp: PnP ACPI: found 14 devices
- [ 0.199276] ACPI: ACPI bus type pnp unregistered
- [ 0.199279] PnPBIOS: Disabled by ACPI PNP
- [ 0.199292] system 00:07: ioport range 0x4d0-0x4d1 has been reserved
- [ 0.199295] system 00:07: ioport range 0x800-0x80f has been reserved
- [ 0.199298] system 00:07: ioport range 0x2000-0x207f has been reserved
- [ 0.199301] system 00:07: ioport range 0x2080-0x20ff has been reserved
- [ 0.199304] system 00:07: ioport range 0x2400-0x247f has been reserved
- [ 0.199307] system 00:07: ioport range 0x2480-0x24ff has been reserved
- [ 0.199311] system 00:07: ioport range 0x2800-0x287f has been reserved
- [ 0.199317] system 00:07: ioport range 0x2880-0x28ff has been reserved
- [ 0.199320] system 00:07: ioport range 0x2c00-0x2c7f has been reserved
- [ 0.199323] system 00:07: ioport range 0x2c80-0x2cff has been reserved
- [ 0.199327] system 00:07: iomem range 0xfed45000-0xfdac9fff could not be reserved
- [ 0.199331] system 00:07: iomem range 0xfefe0000-0xfefe01ff has been reserved
- [ 0.199334] system 00:07: iomem range 0xfefe1000-0xfefe1fff has been reserved
- [ 0.199337] system 00:07: iomem range 0xfee01000-0xfeefffff has been reserved
- [ 0.199343] system 00:09: iomem range 0xfec00000-0xfec00fff could not be reserved
- [ 0.199347] system 00:09: iomem range 0xfee00000-0xfee00fff has been reserved
- [ 0.199352] system 00:0b: ioport range 0xa00-0xadf has been reserved
- [ 0.199355] system 00:0b: ioport range 0xae0-0xaef has been reserved
- [ 0.199360] system 00:0c: iomem range 0xe0000000-0xefffffff has been reserved
- [ 0.199366] system 00:0d: iomem range 0x0-0x9ffff could not be reserved
- [ 0.199369] system 00:0d: iomem range 0xc0000-0xcffff could not be reserved
- [ 0.199372] system 00:0d: iomem range 0xe0000-0xfffff could not be reserved
- [ 0.199375] system 00:0d: iomem range 0x100000-0x3fffffff could not be reserved
- [ 0.199379] system 00:0d: iomem range 0xfed45000-0xffffffff could not be reserved
- [ 0.234103] Switching to clocksource acpi_pm
- [ 0.234179] pci 0000:00:08.0: PCI bridge, secondary bus 0000:01
- [ 0.234179] pci 0000:00:08.0: IO window: disabled
- [ 0.234179] pci 0000:00:08.0: MEM window: disabled
- [ 0.234179] pci 0000:00:08.0: PREFETCH window: disabled
- [ 0.234179] pci 0000:00:0b.0: PCI bridge, secondary bus 0000:02
- [ 0.234179] pci 0000:00:0b.0: IO window: disabled
- [ 0.234179] pci 0000:00:0b.0: MEM window: disabled
- [ 0.234179] pci 0000:00:0b.0: PREFETCH window: disabled
- [ 0.234179] pci 0000:00:0c.0: PCI bridge, secondary bus 0000:03
- [ 0.234179] pci 0000:00:0c.0: IO window: disabled
- [ 0.234179] pci 0000:00:0c.0: MEM window: disabled
- [ 0.234179] pci 0000:00:0c.0: PREFETCH window: disabled
- [ 0.234179] pci 0000:00:0d.0: PCI bridge, secondary bus 0000:04
- [ 0.234179] pci 0000:00:0d.0: IO window: disabled
- [ 0.234179] pci 0000:00:0d.0: MEM window: disabled
- [ 0.234179] pci 0000:00:0d.0: PREFETCH window: disabled
- [ 0.234179] pci 0000:00:0e.0: PCI bridge, secondary bus 0000:05
- [ 0.234179] pci 0000:00:0e.0: IO window: disabled
- [ 0.234179] pci 0000:00:0e.0: MEM window: disabled
- [ 0.234179] pci 0000:00:0e.0: PREFETCH window: disabled
- [ 0.234179] pci 0000:00:0f.0: PCI bridge, secondary bus 0000:06
- [ 0.234179] pci 0000:00:0f.0: IO window: disabled
- [ 0.234179] pci 0000:00:0f.0: MEM window: disabled
- [ 0.234179] pci 0000:00:0f.0: PREFETCH window: disabled
- [ 0.234179] pci 0000:00:10.0: PCI bridge, secondary bus 0000:07
- [ 0.234179] pci 0000:00:10.0: IO window: disabled
- [ 0.234179] pci 0000:00:10.0: MEM window: disabled
- [ 0.234179] pci 0000:00:10.0: PREFETCH window: disabled
- [ 0.234179] pci 0000:00:11.0: PCI bridge, secondary bus 0000:08
- [ 0.234179] pci 0000:00:11.0: IO window: disabled
- [ 0.234179] pci 0000:00:11.0: MEM window: disabled
- [ 0.234179] pci 0000:00:11.0: PREFETCH window: disabled
- [ 0.234179] pci 0000:00:08.0: setting latency timer to 64
- [ 0.234179] pci 0000:00:0b.0: setting latency timer to 64
- [ 0.234179] pci 0000:00:0c.0: setting latency timer to 64
- [ 0.234179] pci 0000:00:0d.0: setting latency timer to 64
- [ 0.234179] pci 0000:00:0e.0: setting latency timer to 64
- [ 0.234179] pci 0000:00:0f.0: setting latency timer to 64
- [ 0.234179] pci 0000:00:10.0: setting latency timer to 64
- [ 0.234179] pci 0000:00:11.0: setting latency timer to 64
- [ 0.234179] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
- [ 0.234179] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
- [ 0.234179] pci_bus 0000:01: resource 3 io: [0x00-0xffff]
- [ 0.234179] pci_bus 0000:01: resource 4 mem: [0x000000-0xffffffff]
- [ 0.234179] NET: Registered protocol family 2
- [ 0.234179] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
- [ 0.234179] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
- [ 0.234179] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
- [ 0.234179] TCP: Hash tables configured (established 131072 bind 65536)
- [ 0.234179] TCP reno registered
- [ 0.234179] NET: Registered protocol family 1
- [ 0.234253] pci 0000:00:00.0: Found enabled HT MSI Mapping
- [ 0.234303] pci 0000:00:00.0: Found enabled HT MSI Mapping
- [ 0.234363] pci 0000:00:00.0: Found enabled HT MSI Mapping
- [ 0.234423] pci 0000:00:00.0: Found enabled HT MSI Mapping
- [ 0.234486] pci 0000:00:00.0: Found enabled HT MSI Mapping
- [ 0.234553] pci 0000:00:00.0: Found enabled HT MSI Mapping
- [ 0.234624] pci 0000:00:00.0: Found enabled HT MSI Mapping
- [ 0.234698] pci 0000:00:00.0: Found enabled HT MSI Mapping
- [ 0.234777] pci 0000:00:00.0: Found enabled HT MSI Mapping
- [ 0.234859] pci 0000:00:00.0: Found enabled HT MSI Mapping
- [ 0.234865] pci 0000:00:12.0: Boot video device
- [ 0.234924] Unpacking initramfs...
- [ 0.511018] Freeing initrd memory: 10663k freed
- [ 0.519582] audit: initializing netlink socket (disabled)
- [ 0.519596] type=2000 audit(1263805620.516:1): initialized
- [ 0.519777] highmem bounce pool size: 64 pages
- [ 0.519781] HugeTLB registered 4 MB page size, pre-allocated 0 pages
- [ 0.521141] VFS: Disk quotas dquot_6.5.2
- [ 0.521198] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
- [ 0.521266] msgmni has been set to 1741
- [ 0.521457] alg: No test for stdrng (krng)
- [ 0.521507] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
- [ 0.521510] io scheduler noop registered
- [ 0.521512] io scheduler anticipatory registered
- [ 0.521514] io scheduler deadline registered
- [ 0.521546] io scheduler cfq registered (default)
- [ 0.521647] pcieport 0000:00:0b.0: irq 24 for MSI/MSI-X
- [ 0.521653] pcieport 0000:00:0b.0: setting latency timer to 64
- [ 0.521718] pcieport 0000:00:0c.0: irq 25 for MSI/MSI-X
- [ 0.521721] pcieport 0000:00:0c.0: setting latency timer to 64
- [ 0.521783] pcieport 0000:00:0d.0: irq 26 for MSI/MSI-X
- [ 0.521787] pcieport 0000:00:0d.0: setting latency timer to 64
- [ 0.521850] pcieport 0000:00:0e.0: irq 27 for MSI/MSI-X
- [ 0.521854] pcieport 0000:00:0e.0: setting latency timer to 64
- [ 0.521914] pcieport 0000:00:0f.0: irq 28 for MSI/MSI-X
- [ 0.521918] pcieport 0000:00:0f.0: setting latency timer to 64
- [ 0.521979] pcieport 0000:00:10.0: irq 29 for MSI/MSI-X
- [ 0.521983] pcieport 0000:00:10.0: setting latency timer to 64
- [ 0.522044] pcieport 0000:00:11.0: irq 30 for MSI/MSI-X
- [ 0.522048] pcieport 0000:00:11.0: setting latency timer to 64
- [ 0.522241] vesafb: framebuffer at 0xd0000000, mapped to 0xf7c80000, using 3072k, total 3072k
- [ 0.522244] vesafb: mode is 1024x768x32, linelength=4096, pages=0
- [ 0.522246] vesafb: scrolling: redraw
- [ 0.522249] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
- [ 0.536943] Console: switching to colour frame buffer device 128x48
- [ 0.551490] fb0: VESA VGA frame buffer device
- [ 0.551522] isapnp: Scanning for PnP cards...
- [ 0.860979] isapnp: No Plug & Play device found
- [ 0.862215] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
- [ 0.862304] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
- [ 0.862546] 00:04: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
- [ 0.862725] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
- [ 0.862727] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
- [ 0.863428] serio: i8042 KBD port at 0x60,0x64 irq 1
- [ 0.863483] mice: PS/2 mouse device common for all mice
- [ 0.863499] Driver 'rtc_cmos' needs updating - please use bus_type methods
- [ 0.863531] rtc_cmos 00:08: RTC can wake from S4
- [ 0.863561] rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0
- [ 0.863595] rtc0: alarms up to one year, y3k, 114 bytes nvram
- [ 0.863605] cpuidle: using governor ladder
- [ 0.863607] cpuidle: using governor menu
- [ 0.863611] No iBFT detected.
- [ 0.863960] TCP cubic registered
- [ 0.864115] NET: Registered protocol family 10
- [ 0.864573] lo: Disabled Privacy Extensions
- [ 0.864889] Mobile IPv6
- [ 0.864891] NET: Registered protocol family 17
- [ 0.864906] Using IPI No-Shortcut mode
- [ 0.864977] registered taskstats version 1
- [ 0.865313] rtc_cmos 00:08: setting system clock to 2010-01-18 09:07:01 UTC (1263805621)
- [ 0.865372] Freeing unused kernel memory: 368k freed
- [ 0.865677] Write protecting the kernel text: 2416k
- [ 0.865702] Write protecting the kernel read-only data: 872k
- [ 0.882228] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
- [ 1.079824] usbcore: registered new interface driver usbfs
- [ 1.079854] usbcore: registered new interface driver hub
- [ 1.079884] usbcore: registered new device driver usb
- [ 1.082567] SCSI subsystem initialized
- [ 1.092707] Uniform Multi-Platform E-IDE driver
- [ 1.094533] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 1.096799] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 23
- [ 1.096814] ehci_hcd 0000:00:02.1: PCI INT B -> Link[LUB2] -> GSI 23 (level, low) -> IRQ 23
- [ 1.096836] ehci_hcd 0000:00:02.1: setting latency timer to 64
- [ 1.096839] ehci_hcd 0000:00:02.1: EHCI Host Controller
- [ 1.096872] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
- [ 1.096894] ehci_hcd 0000:00:02.1: debug port 1
- [ 1.096901] ehci_hcd 0000:00:02.1: cache line size of 64 is not supported
- [ 1.096921] ehci_hcd 0000:00:02.1: irq 23, io mem 0xfebfec00
- [ 1.098192] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
- [ 1.098205] ACPI: Power Button [PWRB]
- [ 1.098281] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
- [ 1.098285] ACPI: Power Button [PWRF]
- [ 1.100024] Floppy drive(s): fd0 is 1.44M
- [ 1.108521] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00
- [ 1.108565] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
- [ 1.108567] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 1.108570] usb usb1: Product: EHCI Host Controller
- [ 1.108572] usb usb1: Manufacturer: Linux 2.6.32-trunk-686 ehci_hcd
- [ 1.108575] usb usb1: SerialNumber: 0000:00:02.1
- [ 1.108667] usb usb1: configuration #1 chosen from 1 choice
- [ 1.108698] hub 1-0:1.0: USB hub found
- [ 1.108708] hub 1-0:1.0: 6 ports detected
- [ 1.108952] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
- [ 1.109336] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 22
- [ 1.109348] forcedeth 0000:00:0a.0: PCI INT A -> Link[LMAC] -> GSI 22 (level, low) -> IRQ 22
- [ 1.109352] forcedeth 0000:00:0a.0: setting latency timer to 64
- [ 1.119590] libata version 3.00 loaded.
- [ 1.123020] FDC 0 is a post-1991 82077
- [ 1.629189] forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x732 @ 1, addr 00:1d:92:69:ef:71
- [ 1.629194] forcedeth 0000:00:0a.0: highdma pwrctl mgmt gbit lnktim msi desc-v3
- [ 1.629621] ACPI: PCI Interrupt Link [UB12] enabled at IRQ 21
- [ 1.629636] ehci_hcd 0000:00:04.1: PCI INT B -> Link[UB12] -> GSI 21 (level, low) -> IRQ 21
- [ 1.629661] ehci_hcd 0000:00:04.1: setting latency timer to 64
- [ 1.629664] ehci_hcd 0000:00:04.1: EHCI Host Controller
- [ 1.629679] ehci_hcd 0000:00:04.1: new USB bus registered, assigned bus number 2
- [ 1.629706] ehci_hcd 0000:00:04.1: debug port 1
- [ 1.629712] ehci_hcd 0000:00:04.1: cache line size of 64 is not supported
- [ 1.629734] ehci_hcd 0000:00:04.1: irq 21, io mem 0xfebfe800
- [ 1.640525] ehci_hcd 0000:00:04.1: USB 2.0 started, EHCI 1.00
- [ 1.640551] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
- [ 1.640554] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 1.640557] usb usb2: Product: EHCI Host Controller
- [ 1.640559] usb usb2: Manufacturer: Linux 2.6.32-trunk-686 ehci_hcd
- [ 1.640561] usb usb2: SerialNumber: 0000:00:04.1
- [ 1.640653] usb usb2: configuration #1 chosen from 1 choice
- [ 1.640686] hub 2-0:1.0: USB hub found
- [ 1.640694] hub 2-0:1.0: 6 ports detected
- [ 1.640755] amd74xx 0000:00:06.0: UDMA133 controller
- [ 1.640758] amd74xx 0000:00:06.0: IDE controller (0x10de:0x0560 rev 0xa1)
- [ 1.640769] amd74xx 0000:00:06.0: IDE port disabled
- [ 1.640777] amd74xx 0000:00:06.0: BIOS didn't set cable bits correctly. Enabling workaround.
- [ 1.640781] amd74xx 0000:00:06.0: not 100% native mode: will probe irqs later
- [ 1.640786] ide0: BM-DMA at 0xffa0-0xffa7
- [ 1.640793] Probing IDE interface ide0...
- [ 1.674305] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
- [ 2.376110] hda: Optiarc DVD RW AD-7203A, ATAPI CD/DVD-ROM drive
- [ 3.048067] hda: host max PIO5 wanted PIO255(auto-tune) selected PIO4
- [ 3.048355] hda: UDMA/66 mode selected
- [ 3.048659] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
- [ 3.049941] ahci 0000:00:09.0: version 3.0
- [ 3.050336] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 20
- [ 3.050348] ahci 0000:00:09.0: PCI INT A -> Link[LSA0] -> GSI 20 (level, low) -> IRQ 20
- [ 3.050437] ahci 0000:00:09.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl IDE mode
- [ 3.050441] ahci 0000:00:09.0: flags: 64bit ncq sntf led clo pmp pio
- [ 3.050444] ahci 0000:00:09.0: setting latency timer to 64
- [ 3.050945] scsi0 : ahci
- [ 3.051094] scsi1 : ahci
- [ 3.051173] scsi2 : ahci
- [ 3.051247] scsi3 : ahci
- [ 3.051361] ata1: SATA max UDMA/133 irq_stat 0x00400040, connection status changed irq 20
- [ 3.051364] ata2: SATA max UDMA/133 abar m8192@0xfebf6000 port 0xfebf6180 irq 20
- [ 3.051367] ata3: SATA max UDMA/133 abar m8192@0xfebf6000 port 0xfebf6200 irq 20
- [ 3.051370] ata4: SATA max UDMA/133 abar m8192@0xfebf6000 port 0xfebf6280 irq 20
- [ 3.051797] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 23
- [ 3.051803] ohci_hcd 0000:00:02.0: PCI INT A -> Link[LUB0] -> GSI 23 (level, low) -> IRQ 23
- [ 3.051827] ohci_hcd 0000:00:02.0: setting latency timer to 64
- [ 3.051830] ohci_hcd 0000:00:02.0: OHCI Host Controller
- [ 3.051850] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 3
- [ 3.051865] ohci_hcd 0000:00:02.0: irq 23, io mem 0xfebff000
- [ 3.106045] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
- [ 3.106050] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 3.106052] usb usb3: Product: OHCI Host Controller
- [ 3.106054] usb usb3: Manufacturer: Linux 2.6.32-trunk-686 ohci_hcd
- [ 3.106057] usb usb3: SerialNumber: 0000:00:02.0
- [ 3.106152] usb usb3: configuration #1 chosen from 1 choice
- [ 3.106188] hub 3-0:1.0: USB hub found
- [ 3.106202] hub 3-0:1.0: 6 ports detected
- [ 3.106621] ACPI: PCI Interrupt Link [UB11] enabled at IRQ 22
- [ 3.106627] ohci_hcd 0000:00:04.0: PCI INT A -> Link[UB11] -> GSI 22 (level, low) -> IRQ 22
- [ 3.106650] ohci_hcd 0000:00:04.0: setting latency timer to 64
- [ 3.106653] ohci_hcd 0000:00:04.0: OHCI Host Controller
- [ 3.106663] ohci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 4
- [ 3.106694] ohci_hcd 0000:00:04.0: irq 22, io mem 0xfebfd000
- [ 3.162020] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
- [ 3.162023] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 3.162025] usb usb4: Product: OHCI Host Controller
- [ 3.162027] usb usb4: Manufacturer: Linux 2.6.32-trunk-686 ohci_hcd
- [ 3.162030] usb usb4: SerialNumber: 0000:00:04.0
- [ 3.162094] usb usb4: configuration #1 chosen from 1 choice
- [ 3.162123] hub 4-0:1.0: USB hub found
- [ 3.162131] hub 4-0:1.0: 6 ports detected
- [ 3.368024] ata3: SATA link down (SStatus 0 SControl 300)
- [ 3.368044] ata4: SATA link down (SStatus 0 SControl 300)
- [ 3.368057] ata2: SATA link down (SStatus 0 SControl 300)
- [ 3.480017] usb 3-1: new low speed USB device using ohci_hcd and address 2
- [ 3.692060] usb 3-1: New USB device found, idVendor=046d, idProduct=c05b
- [ 3.692063] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
- [ 3.692066] usb 3-1: Product: USB Optical Mouse
- [ 3.692068] usb 3-1: Manufacturer: Logitech
- [ 3.692162] usb 3-1: configuration #1 chosen from 1 choice
- [ 3.868017] usb 4-1: new full speed USB device using ohci_hcd and address 2
- [ 3.936019] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
- [ 3.936623] ata1.00: ATA-7: ST3250310AS, 3.AAF, max UDMA/133
- [ 3.936626] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32)
- [ 3.937390] ata1.00: configured for UDMA/133
- [ 3.937486] scsi 0:0:0:0: Direct-Access ATA ST3250310AS 3.AA PQ: 0 ANSI: 5
- [ 3.950227] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
- [ 3.950264] sd 0:0:0:0: [sda] Write Protect is off
- [ 3.950268] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
- [ 3.950286] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 3.950497] sda:
- [ 3.954156] ide-cd driver 5.00
- [ 3.955107] ide-cd: hda: ATAPI 48X DVD-ROM DVD-R/RAM CD-R/RW drive, 974kB Cache
- [ 3.955112] Uniform CD-ROM driver Revision: 3.20
- [ 3.968248] sda1 sda2 < sda5 sda6 sda7 sda8 >
- [ 4.002840] sd 0:0:0:0: [sda] Attached SCSI disk
- [ 4.007451] usbcore: registered new interface driver hiddev
- [ 4.013380] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:02.0/usb3/3-1/3-1:1.0/input/input3
- [ 4.013462] generic-usb 0003:046D:C05B.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:02.0-1/input0
- [ 4.013498] usbcore: registered new interface driver usbhid
- [ 4.013501] usbhid: v2.6:USB HID core driver
- [ 4.083058] usb 4-1: New USB device found, idVendor=04e8, idProduct=325b
- [ 4.083063] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
- [ 4.083066] usb 4-1: Product: Xerox Phaser 3117
- [ 4.083068] usb 4-1: Manufacturer: Xerox Corporation
- [ 4.083070] usb 4-1: SerialNumber: L93187319.......
- [ 4.083188] usb 4-1: configuration #1 chosen from 1 choice
- [ 4.341037] PM: Starting manual resume from disk
- [ 4.357667] REISERFS (device sda7): found reiserfs format "3.6" with standard journal
- [ 4.357688] REISERFS (device sda7): using ordered data mode
- [ 4.369060] REISERFS (device sda7): journal params: device sda7, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
- [ 4.369632] REISERFS (device sda7): checking transaction log (sda7)
- [ 4.420424] REISERFS (device sda7): Using r5 hash to sort names
- [ 6.013050] udev: starting version 150
- [ 7.135034] ACPI: WMI: Mapper loaded
- [ 7.219113] processor LNXCPU:00: registered as cooling_device0
- [ 7.219429] processor LNXCPU:01: registered as cooling_device1
- [ 7.302174] parport_pc 00:06: reported by Plug and Play ACPI
- [ 7.302219] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
- [ 7.320633] input: PC Speaker as /devices/platform/pcspkr/input/input4
- [ 7.402430] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
- [ 7.860885] i2c i2c-0: nForce2 SMBus adapter at 0x2d00
- [ 7.860905] i2c i2c-1: nForce2 SMBus adapter at 0x2e00
- [ 8.236178] usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x04E8 pid 0x325B
- [ 8.236199] usbcore: registered new interface driver usblp
- [ 8.654203] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 21
- [ 8.654210] HDA Intel 0000:00:07.0: PCI INT A -> Link[LAZA] -> GSI 21 (level, low) -> IRQ 21
- [ 8.654239] HDA Intel 0000:00:07.0: setting latency timer to 64
- [ 9.224021] hda_codec: ALC888: BIOS auto-probing.
- [ 9.464097] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:07.0/input/input5
- [ 10.441715] Adding 1759044k swap on /dev/sda6. Priority:-1 extents:1 across:1759044k
- [ 10.626075] loop: module loaded
- [ 10.850909] REISERFS (device sda8): found reiserfs format "3.6" with standard journal
- [ 10.850940] REISERFS (device sda8): using ordered data mode
- [ 10.854629] REISERFS (device sda8): journal params: device sda8, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
- [ 10.855183] REISERFS (device sda8): checking transaction log (sda8)
- [ 10.874323] REISERFS (device sda8): Using r5 hash to sort names
- [ 11.027910] fuse init (API version 7.13)
- [ 12.317266] forcedeth 0000:00:0a.0: irq 31 for MSI/MSI-X
- [ 13.963807] Slow work thread pool: Starting up
- [ 13.964163] Slow work thread pool: Ready
- [ 14.732564] powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 4200+ processors (2 cpu cores) (version 2.20.00)
- [ 14.732579] [Firmware Bug]: powernow-k8: No compatible ACPI _PSS objects found.
- [ 14.732580] [Firmware Bug]: powernow-k8: Try again with latest BIOS.
- [ 16.263898] vboxdrv: disagrees about version of symbol module_layout
- [ 22.488023] eth0: no IPv6 routers present
- [ 23.290558] lp0: using parport0 (interrupt-driven).
- [ 23.312981] ppdev: user-space parallel port driver
- [ 26.133128] Linux agpgart interface v0.103
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement