[    4.589624] scsi 0:0:0:0: Direct-Access     WDC WD10 JPVT-22A1YT0     01.0 PQ: 0 ANSI: 2
[    4.590226] sd 0:0:0:0: Attached scsi generic sg3 type 0
[    4.593951] sd 0:0:0:0: [sdc] 1953525165 512-byte logical blocks: (1.00 TB/931 GiB)
[    4.594514] sd 0:0:0:0: [sdc] Write Protect is off
[    4.594533] sd 0:0:0:0: [sdc] Mode Sense: 00 06 00 00
[    4.595084] sd 0:0:0:0: [sdc] No Caching mode page present
[    4.595115] sd 0:0:0:0: [sdc] Assuming drive cache: write through
[   25.108721] EXT4-fs (dm-5): mounted filesystem with ordered data mode. Opts: (null)
[   26.689963] init: ureadahead main process (620) terminated with status 5
[   27.507522] EXT4-fs (dm-5): re-mounted. Opts: errors=remount-ro
[   28.950974] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   28.950980] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[   29.526728] udevd[793]: starting version 175
[   31.548306] microcode: CPU0 sig=0x206a7, pf=0x2, revision=0x28
[   31.552769] lp: driver loaded but no devices found
[   31.648111] microcode: CPU1 sig=0x206a7, pf=0x2, revision=0x28
[   31.649076] microcode: CPU2 sig=0x206a7, pf=0x2, revision=0x28
[   31.650104] microcode: CPU3 sig=0x206a7, pf=0x2, revision=0x28
[   31.651108] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[   31.659104] device-mapper: multipath: version 1.5.1 loaded
[   31.670899] gpio_ich: GPIO from 180 to 255 on gpio_ich
[   31.740525] mei 0000:00:16.0: setting latency timer to 64
[   31.740595] mei 0000:00:16.0: irq 50 for MSI/MSI-X
[   33.697884] type=1400 audit(1402061809.995:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=1181 comm="apparmor_parser"
[   33.697910] type=1400 audit(1402061809.995:3): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=1179 comm="apparmor_parser"
[   33.697918] type=1400 audit(1402061809.995:4): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=1178 comm="apparmor_parser"
[   33.698188] type=1400 audit(1402061809.995:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1181 comm="apparmor_parser"
[   33.698309] type=1400 audit(1402061809.995:6): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1179 comm="apparmor_parser"
[   33.698316] type=1400 audit(1402061809.995:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1178 comm="apparmor_parser"
[   33.698357] type=1400 audit(1402061809.995:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=1181 comm="apparmor_parser"
[   33.698538] type=1400 audit(1402061809.995:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=1179 comm="apparmor_parser"
[   33.698544] type=1400 audit(1402061809.995:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=1178 comm="apparmor_parser"
[   34.276859] e1000e 0000:00:19.0: irq 47 for MSI/MSI-X
[   34.380585] e1000e 0000:00:19.0: irq 47 for MSI/MSI-X
[   34.380704] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[   34.389013] r8169 0000:02:00.0 eth0: link down
[   34.389043] r8169 0000:02:00.0 eth0: link down
[   34.389076] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   35.387023] usb 3-2: reset high-speed USB device number 2 using xhci_hcd
[   35.408707] xhci_hcd 0000:03:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff880115781a80
[   35.408712] xhci_hcd 0000:03:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff880115781ac0
[   36.044135] r8169 0000:02:00.0 eth0: link up
[   36.044153] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   38.456060] init: failsafe main process (1259) killed by TERM signal
*censored*
*censored*
*censored*
*censored*
*censored*
*censored*
*censored*
*censored*
*censored*
*censored*
*censored*
*censored*
*censored*
*censored*
*censored*
*censored*
[   45.422156] Bridge firewalling registered
[   47.784377] ip_tables: (C) 2000-2006 Netfilter Core Team
[   48.851627] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[   49.270546] IPv6: ADDRCONF(NETDEV_UP): virbr0: link is not ready
[   51.119897] Ebtables v2.0 registered
[   51.343369] ip6_tables: (C) 2000-2006 Netfilter Core Team
[   52.682593] cgroup: libvirtd (1693) created nested cgroup for controller "memory" which has incomplete hierarchy support. Nested cgroups may change behavior in the future.
[   52.682596] cgroup: "memory" requires setting use_hierarchy to 1 on the root.
[   52.682628] cgroup: libvirtd (1693) created nested cgroup for controller "devices" which has incomplete hierarchy support. Nested cgroups may change behavior in the future.
[   52.682663] cgroup: libvirtd (1693) created nested cgroup for controller "blkio" which has incomplete hierarchy support. Nested cgroups may change behavior in the future.
*censored*
[   63.243578] postgres (2210): /proc/2210/oom_adj is deprecated, please use /proc/2210/oom_score_adj instead.
[   69.282959] sd 0:0:0:0: Device offlined - not ready after error recovery
[   69.282974] usb 3-2: USB disconnect, device number 2
[   69.283127] sd 0:0:0:0: [sdc] READ CAPACITY failed
[   69.283131] sd 0:0:0:0: [sdc]
[   69.283134] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
[   69.283136] sd 0:0:0:0: [sdc] Sense not available.
[   69.283166] sd 0:0:0:0: [sdc] Truncating mode parameter data from 62397 to 512 bytes
[   69.283168] sd 0:0:0:0: [sdc] No Caching mode page present
[   69.284201] sd 0:0:0:0: [sdc] Assuming drive cache: write through
[   69.285052] sdc: detected capacity change from 1000204884480 to 0
[   69.285159] sd 0:0:0:0: [sdc] READ CAPACITY failed
[   69.285162] sd 0:0:0:0: [sdc]
[   69.285164] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
[   69.285165] sd 0:0:0:0: [sdc] Sense not available.
[   69.285185] sd 0:0:0:0: [sdc] Asking for cache data failed
[   69.286016] sd 0:0:0:0: [sdc] Assuming drive cache: write through
[   69.286891] sd 0:0:0:0: [sdc] Attached SCSI disk
[   69.841867] usb 3-2: new high-speed USB device number 3 using xhci_hcd
[   69.867344] usb 3-2: New USB device found, idVendor=1234, idProduct=5678
[   69.867349] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[   69.867361] usb 3-2: Product: VLI Product String
[   69.867362] usb 3-2: Manufacturer: VLI manufacture String
[   69.867364] usb 3-2: SerialNumber: 0000000000006139
[   69.868139] scsi7 : usb-storage 3-2:1.0
[   73.220793] scsi 7:0:0:0: Direct-Access     WDC WD10 JPVT-22A1YT0     01.0 PQ: 0 ANSI: 2
[   73.221222] sd 7:0:0:0: Attached scsi generic sg3 type 0
[   73.224917] sd 7:0:0:0: [sdc] 1953525165 512-byte logical blocks: (1.00 TB/931 GiB)
[   73.225481] sd 7:0:0:0: [sdc] Write Protect is off
[   73.225485] sd 7:0:0:0: [sdc] Mode Sense: 00 06 00 00
[   73.226030] sd 7:0:0:0: [sdc] No Caching mode page present
[   73.226855] sd 7:0:0:0: [sdc] Assuming drive cache: write through
[  104.249645] usb 3-2: reset high-speed USB device number 3 using xhci_hcd
[  104.271199] xhci_hcd 0000:03:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff880117cde300
[  104.271205] xhci_hcd 0000:03:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff880117cde340
[  138.201861] usb 3-2: reset high-speed USB device number 3 using xhci_hcd
[  138.223533] xhci_hcd 0000:03:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff880117cde300
[  138.223540] xhci_hcd 0000:03:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff880117cde340
[  172.185897] usb 3-2: reset high-speed USB device number 3 using xhci_hcd
[  172.207552] xhci_hcd 0000:03:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff880117cde300
[  172.207558] xhci_hcd 0000:03:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff880117cde340
[  206.042309] usb 3-2: reset high-speed USB device number 3 using xhci_hcd
[  206.063942] xhci_hcd 0000:03:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff880117cde300
[  206.063949] xhci_hcd 0000:03:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff880117cde340
[  209.353772] sd 7:0:0:0: [sdc] No Caching mode page present
[  209.353820] sd 7:0:0:0: [sdc] Assuming drive cache: write through
[  240.026427] usb 3-2: reset high-speed USB device number 3 using xhci_hcd
[  240.048088] xhci_hcd 0000:03:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff880117cde300
[  240.048094] xhci_hcd 0000:03:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff880117cde340
[  274.010449] usb 3-2: reset high-speed USB device number 3 using xhci_hcd
[  274.032114] xhci_hcd 0000:03:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff880117cde300
[  274.032120] xhci_hcd 0000:03:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff880117cde340
[  307.866836] usb 3-2: reset high-speed USB device number 3 using xhci_hcd
[  307.888623] xhci_hcd 0000:03:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff880117cde300
[  307.888628] xhci_hcd 0000:03:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff880117cde340
[  341.850982] usb 3-2: reset high-speed USB device number 3 using xhci_hcd
[  341.872891] xhci_hcd 0000:03:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff880117cde300
[  341.872897] xhci_hcd 0000:03:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff880117cde340
[  345.152514]  sdc: sdc1
[  346.212323] sd 7:0:0:0: [sdc] No Caching mode page present
[  346.212389] sd 7:0:0:0: [sdc] Assuming drive cache: write through
[  376.745415] usb 3-2: reset high-speed USB device number 3 using xhci_hcd
[  376.766936] xhci_hcd 0000:03:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff880117cde300
[  376.766942] xhci_hcd 0000:03:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff880117cde340
[  410.713590] usb 3-2: reset high-speed USB device number 3 using xhci_hcd
[  410.735129] xhci_hcd 0000:03:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff880117cde300
[  410.735136] xhci_hcd 0000:03:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff880117cde340
[  444.697622] usb 3-2: reset high-speed USB device number 3 using xhci_hcd
[  444.719527] xhci_hcd 0000:03:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff880117cde300
[  444.719533] xhci_hcd 0000:03:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff880117cde340
[  478.554009] usb 3-2: reset high-speed USB device number 3 using xhci_hcd
[  478.575541] xhci_hcd 0000:03:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff880117cde300
[  478.575547] xhci_hcd 0000:03:00.0: xHCI xhci_drop_endpoint called with disabled ep ffff880117cde340
[  481.855947] sd 7:0:0:0: [sdc] Attached SCSI disk