Linux version 2.6.35.11 (root@flecha) (gcc version 4.4.5 (Debian 4.4.5-11) ) #1 SMP Tue Feb 22 20:07:43 WET 2011
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009dc00 (usable)
 BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 00000000db7e0000 (usable)
 BIOS-e820: 00000000db7e0000 - 00000000db7e3000 (ACPI NVS)
 BIOS-e820: 00000000db7e3000 - 00000000db7f0000 (ACPI data)
 BIOS-e820: 00000000db7f0000 - 00000000db800000 (reserved)
 BIOS-e820: 00000000f4000000 - 00000000f8000000 (reserved)
 BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
 BIOS-e820: 0000000100000000 - 00000001fc000000 (usable)
 BIOS-e820: 00000001fc000000 - 0000000200000000 (reserved)
 BIOS-e820: 0000000200000000 - 0000000220000000 (usable)
NX (Execute Disable) protection: active
DMI 2.4 present.
e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
last_pfn = 0x220000 max_arch_pfn = 0x1000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-BFFFF uncachable
  C0000-CDFFF write-protect
  CE000-EFFFF uncachable
  F0000-FFFFF write-through
MTRR variable ranges enabled:
  0 base 000000000 mask F00000000 write-back
  1 base 0E0000000 mask FE0000000 uncachable
  2 base 0DC000000 mask FFC000000 uncachable
  3 base 100000000 mask F00000000 write-back
  4 base 200000000 mask FE0000000 write-back
  5 disabled
  6 disabled
  7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820 update range: 00000000dc000000 - 0000000100000000 (usable) ==> (reserved)
initial memory mapped : 0 - 01800000
found SMP MP-table at [c00f57a0] f57a0
init_memory_mapping: 0000000000000000-0000000037bfe000
 0000000000 - 0000200000 page 4k
 0000200000 - 0037a00000 page 2M
 0037a00000 - 0037bfe000 page 4k
kernel direct mapping tables up to 37bfe000 @ 7000-c000
ACPI: RSDP 000f7160 00014 (v00 GBT   )
ACPI: RSDT db7e3040 00044 (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
ACPI: FACP db7e30c0 00074 (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
ACPI: DSDT db7e3180 055B4 (v01 GBT    GBTUACPI 00001000 MSFT 0100000C)
ACPI: FACS db7e0000 00040
ACPI: HPET db7e8880 00038 (v01 GBT    GBTUACPI 42302E31 GBTU 00000098)
ACPI: MCFG db7e8900 0003C (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
ACPI: EUDS db7e8940 004D0 (v01 GBT             00000000      00000000)
ACPI: MATS db7e8e10 00034 (v01 GBT             00000000      00000000)
ACPI: TAMG db7e8e80 009D2 (v01 GBT    GBT   B0 5455312E BG?? 53450101)
ACPI: APIC db7e8780 000BC (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
ACPI: SSDT db7e9880 01BF8 (v01  INTEL PPM RCM  80000001 INTL 20061109)
ACPI: Local APIC address 0xfee00000
NUMA - single node, flat memory mode
Node: 0, start_pfn: 0, end_pfn: 220000
  Setting physnode_map array to node 0 for pfns:
  0 4000 8000 c000 10000 14000 18000 1c000 20000 24000 28000 2c000 30000 34000 38000 3c000 40000 44000 48000 4c000 50000 54000 58000 5c000 60000 64000 68000 6c000 70000 74000 78000 7c000 80000 84000 88000 8c000 90000 94000 98000 9c000 a0000 a4000 a8000 ac000 b0000 b4000 b8000 bc000 c0000 c4000 c8000 cc000 d0000 d4000 d8000 dc000 e0000 e4000 e8000 ec000 f0000 f4000 f8000 fc000 100000 104000 108000 10c000 110000 114000 118000 11c000 120000 124000 128000 12c000 130000 134000 138000 13c000 140000 144000 148000 14c000 150000 154000 158000 15c000 160000 164000 168000 16c000 170000 174000 178000 17c000 180000 184000 188000 18c000 190000 194000 198000 19c000 1a0000 1a4000 1a8000 1ac000 1b0000 1b4000 1b8000 1bc000 1c0000 1c4000 1c8000 1cc000 1d0000 1d4000 1d8000 1dc000 1e0000 1e4000 1e8000 1ec000 1f0000 1f4000 1f8000 1fc000 200000 204000 208000 20c000 210000 214000 218000 21c000
node 0 pfn: [0 - 220000]
Reserving 17920 pages of KVA for lmem_map of node 0 at 21ba00
remove_active_range (0, 2210304, 2228224)
Reserving total of 4600 pages for numa KVA remap
kva_start_pfn ~ 33400 max_low_pfn ~ 37bfe
max_pfn = 220000
7812MB HIGHMEM available.
891MB LOWMEM available.
max_low_pfn = 37bfe, highstart_pfn = 37bfe
Low memory ends at vaddr f7bfe000
node 0 will remap to vaddr f3400000 - f7a00000
allocate_pgdat: node 0 NODE_DATA f3400000
remap_numa_kva: node 0
remap_numa_kva: f3400000 to pfn 0021ba00
remap_numa_kva: f3600000 to pfn 0021bc00
remap_numa_kva: f3800000 to pfn 0021be00
remap_numa_kva: f3a00000 to pfn 0021c000
remap_numa_kva: f3c00000 to pfn 0021c200
remap_numa_kva: f3e00000 to pfn 0021c400
remap_numa_kva: f4000000 to pfn 0021c600
remap_numa_kva: f4200000 to pfn 0021c800
remap_numa_kva: f4400000 to pfn 0021ca00
remap_numa_kva: f4600000 to pfn 0021cc00
remap_numa_kva: f4800000 to pfn 0021ce00
remap_numa_kva: f4a00000 to pfn 0021d000
remap_numa_kva: f4c00000 to pfn 0021d200
remap_numa_kva: f4e00000 to pfn 0021d400
remap_numa_kva: f5000000 to pfn 0021d600
remap_numa_kva: f5200000 to pfn 0021d800
remap_numa_kva: f5400000 to pfn 0021da00
remap_numa_kva: f5600000 to pfn 0021dc00
remap_numa_kva: f5800000 to pfn 0021de00
remap_numa_kva: f5a00000 to pfn 0021e000
remap_numa_kva: f5c00000 to pfn 0021e200
remap_numa_kva: f5e00000 to pfn 0021e400
remap_numa_kva: f6000000 to pfn 0021e600
remap_numa_kva: f6200000 to pfn 0021e800
remap_numa_kva: f6400000 to pfn 0021ea00
remap_numa_kva: f6600000 to pfn 0021ec00
remap_numa_kva: f6800000 to pfn 0021ee00
remap_numa_kva: f6a00000 to pfn 0021f000
remap_numa_kva: f6c00000 to pfn 0021f200
remap_numa_kva: f6e00000 to pfn 0021f400
remap_numa_kva: f7000000 to pfn 0021f600
remap_numa_kva: f7200000 to pfn 0021f800
remap_numa_kva: f7400000 to pfn 0021fa00
remap_numa_kva: f7600000 to pfn 0021fc00
remap_numa_kva: f7800000 to pfn 0021fe00
High memory starts at vaddr f7bfe000
  mapped low ram: 0 - 37bfe000
  low ram: 0 - 37bfe000
Zone PFN ranges:
  DMA      0x00000001 -> 0x00001000
  Normal   0x00001000 -> 0x00037bfe
  HighMem  0x00037bfe -> 0x00220000
Movable zone start PFN for each node
early_node_map[4] active PFN ranges
    0: 0x00000001 -> 0x0000009d
    0: 0x00000100 -> 0x000db7e0
    0: 0x00100000 -> 0x001fc000
    0: 0x00200000 -> 0x0021ba00
On node 0 totalpages: 2044284
free_area_init_node: node 0, pgdat f3400000, node_mem_map f3402020
  DMA zone: 32 pages used for memmap
  DMA zone: 0 pages reserved
  DMA zone: 3964 pages, LIFO batch:0
  Normal zone: 1752 pages used for memmap
  Normal zone: 222502 pages, LIFO batch:31
  HighMem zone: 15485 pages used for memmap
  HighMem zone: 1800549 pages, LIFO batch:31
Using APIC driver default
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x05] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] disabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] disabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] disabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] disabled)
ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] dfl dfl lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
SMP: Allowing 4 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 40
early_res array is doubled to 64 at [3000 - 37ff]
Allocating PCI resources starting at db800000 (gap: db800000:18800000)
setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:8
PERCPU: Embedded 12 pages/cpu @c1400000 s28224 r0 d20928 u524288
pcpu-alloc: s28224 r0 d20928 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 2027015
Policy zone: HighMem
Kernel command line: auto BOOT_IMAGE=linux_raid ro root=900
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
Subtract (50 early reservations)
  #1 [0000001000 - 0000002000]   EX TRAMPOLINE
  #2 [0001000000 - 00013d451c]   TEXT DATA BSS
  #3 [00013d5000 - 00013e10f6]             BRK
  #4 [00000f57b0 - 0000100000]   BIOS reserved
  #5 [00000f57a0 - 00000f57b0]    MP-table mpf
  #6 [000009dc00 - 00000f0d00]   BIOS reserved
  #7 [00000f0e94 - 00000f57a0]   BIOS reserved
  #8 [00000f0d00 - 00000f0e94]    MP-table mpc
  #9 [0000002000 - 0000003000]      TRAMPOLINE
  #10 [0000007000 - 0000008000]         PGTABLE
  #11 [021ba00000 - 0220000000]         KVA RAM
  #12 [0033400000 - 0037a00000]          KVA PG
  #13 [00013e2000 - 00013e3000]         BOOTMEM
  #14 [00013d4540 - 00013d4544]         BOOTMEM
  #15 [00013d4580 - 00013d4640]         BOOTMEM
  #16 [00013d4640 - 00013d46e8]         BOOTMEM
  #17 [00013e3000 - 00013e6000]         BOOTMEM
  #18 [00013d4700 - 00013d4cac]         BOOTMEM
  #19 [00013e6000 - 00013f2000]         BOOTMEM
  #20 [00013d4cc0 - 00013d4ced]         BOOTMEM
  #21 [00013d4d00 - 00013d4d2f]         BOOTMEM
  #22 [00013d4d40 - 00013d4f14]         BOOTMEM
  #23 [00013d4f40 - 00013d4f80]         BOOTMEM
  #24 [00013d4f80 - 00013d4fc0]         BOOTMEM
  #25 [00013d4fc0 - 00013d5000]         BOOTMEM
  #26 [00013e1100 - 00013e1140]         BOOTMEM
  #27 [00013e1140 - 00013e1180]         BOOTMEM
  #28 [00013e1180 - 00013e11c0]         BOOTMEM
  #29 [00013e11c0 - 00013e1200]         BOOTMEM
  #30 [00013e1200 - 00013e1240]         BOOTMEM
  #31 [00013e1240 - 00013e1280]         BOOTMEM
  #32 [00013e1280 - 00013e12c0]         BOOTMEM
  #33 [00013e12c0 - 00013e1300]         BOOTMEM
  #34 [00013e1300 - 00013e1340]         BOOTMEM
  #35 [00013e1340 - 00013e1367]         BOOTMEM
  #36 [00013e1380 - 00013e13a7]         BOOTMEM
  #37 [0001400000 - 000140c000]         BOOTMEM
  #38 [0001480000 - 000148c000]         BOOTMEM
  #39 [0001500000 - 000150c000]         BOOTMEM
  #40 [0001580000 - 000158c000]         BOOTMEM
  #41 [00013e13c0 - 00013e13c4]         BOOTMEM
  #42 [00013e1400 - 00013e1404]         BOOTMEM
  #43 [00013e1440 - 00013e1450]         BOOTMEM
  #44 [00013e1480 - 00013e1490]         BOOTMEM
  #45 [00013e14c0 - 00013e1558]         BOOTMEM
  #46 [00013e1580 - 00013e15b8]         BOOTMEM
  #47 [00013f2000 - 00013f6000]         BOOTMEM
  #48 [000158c000 - 000160c000]         BOOTMEM
  #49 [000140c000 - 000144c000]         BOOTMEM
Initializing HighMem for node 0 (00037bfe:0021ba00)
Memory: 8100428k/8912896k available (2195k kernel code, 76708k reserved, 985k data, 336k init, 7264136k highmem)
virtual kernel memory layout:
    fixmap  : 0xfff17000 - 0xfffff000   ( 928 kB)
    pkmap   : 0xffc00000 - 0xffe00000   (2048 kB)
    vmalloc : 0xf83fe000 - 0xffbfe000   ( 120 MB)
    lowmem  : 0xc0000000 - 0xf7bfe000   ( 891 MB)
      .init : 0xc131c000 - 0xc1370000   ( 336 kB)
      .data : 0xc1224e16 - 0xc131b558   ( 985 kB)
      .text : 0xc1000000 - 0xc1224e16   (2195 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=8
Hierarchical RCU implementation.
	RCU-based detection of stalled CPUs is disabled.
	Verbose stalled-CPUs detection is disabled.
NR_IRQS:2304 nr_irqs:712
Console: colour VGA+ 80x25
console [tty0] enabled
hpet clockevent registered
Fast TSC calibration using PIT
Detected 3065.919 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 6131.83 BogoMIPS (lpj=30659190)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 512
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
using mwait in idle threads.
Performance Events: PEBS fmt1+, Westmere events, Intel PMU driver.
... version:                3
... bit width:              48
... generic registers:      4
... value mask:             0000ffffffffffff
... max period:             000000007fffffff
... fixed-purpose events:   3
... event mask:             000000070000000f
Freeing SMP alternatives: 16k freed
ACPI: Core revision 20100428
Enabling APIC mode:  Flat.  Using 1 I/O APICs
Mapping cpu 0 to node 0
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Core(TM) i3 CPU         540  @ 3.07GHz stepping 05
Booting Node   0, Processors  #1
Initializing CPU#1
Mapping cpu 1 to node 0
 #2
Initializing CPU#2
Mapping cpu 2 to node 0
 #3 Ok.
Initializing CPU#3
Mapping cpu 3 to node 0
Brought up 4 CPUs
Total of 4 processors activated (24531.42 BogoMIPS).
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf4000000-0xf7ffffff] (base 0xf4000000)
PCI: MMCONFIG at [mem 0xf4000000-0xf7ffffff] reserved in E820
PCI: Using MMCONFIG for extended config space
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI Warning: Incorrect checksum in table [TAMG] - 0x73, should be 0x72 (20100428/tbutils-314)
ACPI: No dock devices found.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f])
pci_root PNP0A03:00: host bridge window [io  0x0000-0x0cf7]
pci_root PNP0A03:00: host bridge window [io  0x0d00-0xffff]
pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff]
pci_root PNP0A03:00: host bridge window [mem 0xdb800000-0xfebfffff]
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: PME# disabled
pci 0000:00:02.0: reg 10: [mem 0xfb400000-0xfb7fffff 64bit]
pci 0000:00:02.0: reg 18: [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:00:02.0: reg 20: [io  0xff00-0xff07]
pci 0000:00:16.0: reg 10: [mem 0xfbfff000-0xfbfff00f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:16.0: PME# disabled
pci 0000:00:1a.0: reg 20: [io  0xfe00-0xfe1f]
pci 0000:00:1a.1: reg 20: [io  0xfd00-0xfd1f]
pci 0000:00:1a.2: reg 20: [io  0xfc00-0xfc1f]
pci 0000:00:1a.7: reg 10: [mem 0xfbffe000-0xfbffe3ff]
pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.7: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: PME# disabled
pci 0000:00:1d.0: reg 20: [io  0xfb00-0xfb1f]
pci 0000:00:1d.1: reg 20: [io  0xfa00-0xfa1f]
pci 0000:00:1d.2: reg 20: [io  0xf900-0xf91f]
pci 0000:00:1d.7: reg 10: [mem 0xfbffd000-0xfbffd3ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1f.2: reg 10: [io  0xf800-0xf807]
pci 0000:00:1f.2: reg 14: [io  0xf700-0xf703]
pci 0000:00:1f.2: reg 18: [io  0xf600-0xf607]
pci 0000:00:1f.2: reg 1c: [io  0xf500-0xf503]
pci 0000:00:1f.2: reg 20: [io  0xf400-0xf41f]
pci 0000:00:1f.2: reg 24: [mem 0xfbffc000-0xfbffc7ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
pci 0000:00:1f.3: reg 10: [mem 0xfbffb000-0xfbffb0ff 64bit]
pci 0000:00:1f.3: reg 20: [io  0x0500-0x051f]
pci 0000:01:00.0: reg 10: [mem 0xfbefe000-0xfbefffff 64bit]
pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
pci 0000:01:00.0: PME# disabled
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0:   bridge window [io  0xf000-0x0000] (disabled)
pci 0000:00:01.0:   bridge window [mem 0xfbe00000-0xfbefffff]
pci 0000:00:01.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:02:00.0: reg 24: [mem 0xfbcfe000-0xfbcfffff]
pci 0000:02:00.0: PME# supported from D3hot
pci 0000:02:00.0: PME# disabled
pci 0000:02:00.1: reg 10: [io  0xdf00-0xdf07]
pci 0000:02:00.1: reg 14: [io  0xde00-0xde03]
pci 0000:02:00.1: reg 18: [io  0xdd00-0xdd07]
pci 0000:02:00.1: reg 1c: [io  0xdc00-0xdc03]
pci 0000:02:00.1: reg 20: [io  0xdb00-0xdb0f]
pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
pci 0000:00:1c.0: PCI bridge to [bus 02-02]
pci 0000:00:1c.0:   bridge window [io  0xd000-0xdfff]
pci 0000:00:1c.0:   bridge window [mem 0xfbc00000-0xfbcfffff]
pci 0000:00:1c.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:03:00.0: reg 10: [io  0xee00-0xeeff]
pci 0000:03:00.0: reg 18: [mem 0xfbbff000-0xfbbfffff 64bit pref]
pci 0000:03:00.0: reg 20: [mem 0xfbbf8000-0xfbbfbfff 64bit pref]
pci 0000:03:00.0: supports D1 D2
pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:03:00.0: PME# disabled
pci 0000:00:1c.1: PCI bridge to [bus 03-03]
pci 0000:00:1c.1:   bridge window [io  0xe000-0xefff]
pci 0000:00:1c.1:   bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:1c.1:   bridge window [mem 0xfbb00000-0xfbbfffff 64bit pref]
pci 0000:04:02.0: reg 10: [io  0xce00-0xceff]
pci 0000:04:02.0: reg 14: [mem 0xfbdff000-0xfbdff0ff]
pci 0000:04:02.0: reg 30: [mem 0x00000000-0x0001ffff pref]
pci 0000:04:02.0: supports D1 D2
pci 0000:04:02.0: PME# supported from D1 D2 D3hot D3cold
pci 0000:04:02.0: PME# disabled
pci 0000:00:1e.0: PCI bridge to [bus 04-04] (subtractive decode)
pci 0000:00:1e.0:   bridge window [io  0xc000-0xcfff]
pci 0000:00:1e.0:   bridge window [mem 0xfbd00000-0xfbdfffff]
pci 0000:00:1e.0:   bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0xdb800000-0xfebfffff] (subtractive decode)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 *12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 *7 9 10 11 12 14 15)
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
SCSI subsystem initialized
libata version 3.00 loaded.
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
reserve RAM buffer: 000000000009dc00 - 000000000009ffff
reserve RAM buffer: 00000000db7e0000 - 00000000dbffffff
Switching to clocksource tsc
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 13 devices
ACPI: ACPI bus type pnp unregistered
system 00:01: [io  0x04d0-0x04d1] has been reserved
system 00:01: [io  0x0290-0x029f] has been reserved
system 00:01: [io  0x0800-0x087f] has been reserved
system 00:01: [io  0x0290-0x0294] has been reserved
system 00:01: [io  0x0880-0x088f] has been reserved
system 00:09: [io  0x0400-0x047f] has been reserved
system 00:09: [io  0x0580-0x05ff] has been reserved
system 00:0a: [mem 0xf4000000-0xf7ffffff] has been reserved
system 00:0b: [mem 0x000d5000-0x000d7fff] has been reserved
system 00:0b: [mem 0x000f0000-0x000f7fff] could not be reserved
system 00:0b: [mem 0x000f8000-0x000fbfff] could not be reserved
system 00:0b: [mem 0x000fc000-0x000fffff] could not be reserved
system 00:0b: [mem 0xdb7e0000-0xdb7effff] could not be reserved
system 00:0b: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:0b: [mem 0x00100000-0xdb7dffff] could not be reserved
system 00:0b: [mem 0xdb7f0000-0xdb7fffff] has been reserved
system 00:0b: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:0b: [mem 0xfed10000-0xfed1dfff] has been reserved
system 00:0b: [mem 0xfed20000-0xfed8ffff] has been reserved
system 00:0b: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:0b: [mem 0xffb00000-0xffb7ffff] has been reserved
system 00:0b: [mem 0xfff00000-0xffffffff] has been reserved
system 00:0b: [mem 0x000e0000-0x000effff] has been reserved
pci 0000:00:1c.0: BAR 15: assigned [mem 0xdb800000-0xdb9fffff 64bit pref]
pci 0000:00:1c.1: BAR 14: assigned [mem 0xdba00000-0xdbdfffff]
pci 0000:00:1e.0: BAR 15: assigned [mem 0xdbe00000-0xdbefffff pref]
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0:   bridge window [io  disabled]
pci 0000:00:01.0:   bridge window [mem 0xfbe00000-0xfbefffff]
pci 0000:00:01.0:   bridge window [mem pref disabled]
pci 0000:00:1c.0: PCI bridge to [bus 02-02]
pci 0000:00:1c.0:   bridge window [io  0xd000-0xdfff]
pci 0000:00:1c.0:   bridge window [mem 0xfbc00000-0xfbcfffff]
pci 0000:00:1c.0:   bridge window [mem 0xdb800000-0xdb9fffff 64bit pref]
pci 0000:00:1c.1: PCI bridge to [bus 03-03]
pci 0000:00:1c.1:   bridge window [io  0xe000-0xefff]
pci 0000:00:1c.1:   bridge window [mem 0xdba00000-0xdbdfffff]
pci 0000:00:1c.1:   bridge window [mem 0xfbb00000-0xfbbfffff 64bit pref]
pci 0000:04:02.0: BAR 6: assigned [mem 0xdbe00000-0xdbe1ffff pref]
pci 0000:00:1e.0: PCI bridge to [bus 04-04]
pci 0000:00:1e.0:   bridge window [io  0xc000-0xcfff]
pci 0000:00:1e.0:   bridge window [mem 0xfbd00000-0xfbdfffff]
pci 0000:00:1e.0:   bridge window [mem 0xdbe00000-0xdbefffff pref]
  alloc irq_desc for 16 on node -1
  alloc kstat_irqs on node -1
pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:01.0: setting latency timer to 64
pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.0: setting latency timer to 64
  alloc irq_desc for 17 on node -1
  alloc kstat_irqs on node -1
pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.1: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: resource 8 [mem 0xdb800000-0xfebfffff]
pci_bus 0000:01: resource 1 [mem 0xfbe00000-0xfbefffff]
pci_bus 0000:02: resource 0 [io  0xd000-0xdfff]
pci_bus 0000:02: resource 1 [mem 0xfbc00000-0xfbcfffff]
pci_bus 0000:02: resource 2 [mem 0xdb800000-0xdb9fffff 64bit pref]
pci_bus 0000:03: resource 0 [io  0xe000-0xefff]
pci_bus 0000:03: resource 1 [mem 0xdba00000-0xdbdfffff]
pci_bus 0000:03: resource 2 [mem 0xfbb00000-0xfbbfffff 64bit pref]
pci_bus 0000:04: resource 0 [io  0xc000-0xcfff]
pci_bus 0000:04: resource 1 [mem 0xfbd00000-0xfbdfffff]
pci_bus 0000:04: resource 2 [mem 0xdbe00000-0xdbefffff pref]
pci_bus 0000:04: resource 4 [io  0x0000-0x0cf7]
pci_bus 0000:04: resource 5 [io  0x0d00-0xffff]
pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:04: resource 7 [mem 0x000c0000-0x000dffff]
pci_bus 0000:04: resource 8 [mem 0xdb800000-0xfebfffff]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
UDP hash table entries: 512 (order: 2, 16384 bytes)
UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
pci 0000:00:02.0: Boot video device
PCI: CLS 64 bytes, default 64
highmem bounce pool size: 64 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
msgmni has been set to 1633
alg: No test for stdrng (krng)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:01.0: setting latency timer to 64
  alloc irq_desc for 40 on node -1
  alloc kstat_irqs on node -1
pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
pcieport 0000:00:1c.0: setting latency timer to 64
  alloc irq_desc for 41 on node -1
  alloc kstat_irqs on node -1
pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
pcieport 0000:00:1c.1: setting latency timer to 64
  alloc irq_desc for 42 on node -1
  alloc kstat_irqs on node -1
pcieport 0000:00:1c.1: irq 42 for MSI/MSI-X
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Uniform Multi-Platform E-IDE driver
jmicron 0000:02:00.1: IDE controller (0x197b:0x2363 rev 0x02)
pci 0000:02:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
jmicron 0000:02:00.1: 100% native mode on irq 17
    ide0: BM-DMA at 0xdb00-0xdb07
    ide1: BM-DMA at 0xdb08-0xdb0f
Probing IDE interface ide0...
hda: IC35L040AVVA07-0, ATA DISK drive
hdb: HDS728080PLAT20, ATA DISK drive
hda: host max PIO5 wanted PIO255(auto-tune) selected PIO4
hda: UDMA/100 mode selected
hdb: host max PIO5 wanted PIO255(auto-tune) selected PIO4
hdb: UDMA/133 mode selected
Probing IDE interface ide1...
ide0 at 0xdf00-0xdf07,0xde02 on irq 17
ide1 at 0xdd00-0xdd07,0xdc02 on irq 17
ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports
Probing IDE interface ide2...
ide2 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide3...
ide3 at 0x170-0x177,0x376 on irq 15
ide-gd driver 1.18
hda: max request size: 128KiB
hda: Host Protected Area detected.
	current capacity is 80416127 sectors (41173 MB)
	native  capacity is 80418240 sectors (41174 MB)
hda: 80416127 sectors (41173 MB) w/1863KiB Cache, CHS=65535/16/63
hda: cache flushes supported
 hda: hda1 hda2
hda: p2 size 2593584 extends beyond EOD, enabling native capacity
hda: detected capacity change from 41173057024 to 41174138880
 hda: hda1 hda2
hdb: max request size: 512KiB
hdb: Host Protected Area detected.
	current capacity is 160834367 sectors (82347 MB)
	native  capacity is 160836480 sectors (82348 MB)
hdb: 160834367 sectors (82347 MB) w/1719KiB Cache, CHS=16383/255/63
hdb: cache flushes supported
 hdb: hdb1 hdb2
ide-cd driver 5.00
ahci 0000:00:1f.2: version 3.0
  alloc irq_desc for 19 on node -1
  alloc kstat_irqs on node -1
ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
  alloc irq_desc for 43 on node -1
  alloc kstat_irqs on node -1
ahci 0000:00:1f.2: irq 43 for MSI/MSI-X
ahci: SSS flag set, parallel bus scan disabled
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pmp pio slum part ems apst
ahci 0000:00:1f.2: setting latency timer to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m2048@0xfbffc000 port 0xfbffc100 irq 43
ata2: SATA max UDMA/133 abar m2048@0xfbffc000 port 0xfbffc180 irq 43
ata3: SATA max UDMA/133 abar m2048@0xfbffc000 port 0xfbffc200 irq 43
ata4: SATA max UDMA/133 abar m2048@0xfbffc000 port 0xfbffc280 irq 43
ata5: SATA max UDMA/133 abar m2048@0xfbffc000 port 0xfbffc300 irq 43
ata6: SATA max UDMA/133 abar m2048@0xfbffc000 port 0xfbffc380 irq 43
ahci 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
ahci 0000:02:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
ahci 0000:02:00.0: flags: 64bit ncq pm led clo pmp pio slum part
ahci 0000:02:00.0: setting latency timer to 64
scsi6 : ahci
scsi7 : ahci
ata7: SATA max UDMA/133 abar m8192@0xfbcfe000 port 0xfbcfe100 irq 16
ata8: SATA max UDMA/133 abar m8192@0xfbcfe000 port 0xfbcfe180 irq 16
PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
md: raid1 personality registered for level 1
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
Using IPI Shortcut mode
registered taskstats version 1
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ATA-8: WDC WD2500AAJS-00VTA0, 01.01B01, max UDMA/133
ata1.00: 488397168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
ata1.00: configured for UDMA/133
ata7: SATA link down (SStatus 0 SControl 300)
ata8: SATA link down (SStatus 0 SControl 300)
scsi 0:0:0:0: Direct-Access     ATA      WDC WD2500AAJS-0 01.0 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1 sda2
sd 0:0:0:0: [sda] Attached SCSI disk
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2.00: ATA-7: WDC WD2500JS-00MVB1, 10.02E01, max UDMA/133
ata2.00: 488397168 sectors, multi 0: LBA48
ata2.00: configured for UDMA/133
scsi 1:0:0:0: Direct-Access     ATA      WDC WD2500JS-00M 10.0 PQ: 0 ANSI: 5
sd 1:0:0:0: [sdb] 488397168 512-byte logical blocks: (250 GB/232 GiB)
sd 1:0:0:0: Attached scsi generic sg1 type 0
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sdb: sdb1 sdb2
sd 1:0:0:0: [sdb] Attached SCSI disk
ata3: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
ata5: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
md: Waiting for all devices to be available before autodetect
md: If you don't use raid, use raid=noautodetect
md: Autodetecting RAID arrays.
md: could not bd_claim hda1.
md: Scanned 5 and added 4 devices.
md: autorun ...
md: considering sdb1 ...
md:  adding sdb1 ...
md:  adding sda1 ...
md: hdb1 has different UUID to sdb1
md: hda1 has different UUID to sdb1
md: created md1
md: bind<sda1>
md: bind<sdb1>
md: running: <sdb1><sda1>
md/raid1:md1: active with 2 out of 2 mirrors
md1: detected capacity change from 0 to 248008540160
md: considering hdb1 ...
md:  adding hdb1 ...
md:  adding hda1 ...
md: created md0
md: bind<hda1>
md: bind<hdb1>
md: running: <hdb1><hda1>
md/raid1:md0: active with 2 out of 2 mirrors
md0: detected capacity change from 0 to 39846084608
md: ... autorun DONE.
 md0:
REISERFS (device md0): found reiserfs format "3.6" with standard journal
REISERFS (device md0): using ordered data mode
REISERFS (device md0): journal params: device md0, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
REISERFS (device md0): checking transaction log (md0)
REISERFS (device md0): Using r5 hash to sort names
VFS: Mounted root (reiserfs filesystem) readonly on device 9:0.
Freeing unused kernel memory: 336k freed
NET: Registered protocol family 1
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: Power Button [PWRF]
ACPI: acpi_idle registered with cpuidle
Monitor-Mwait will be used to enter C-1 state
Monitor-Mwait will be used to enter C-2 state
Monitor-Mwait will be used to enter C-3 state
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
r8169 0000:03:00.0: setting latency timer to 64
r8169 0000:03:00.0: (unregistered net_device): unknown MAC, using family default
  alloc irq_desc for 44 on node -1
  alloc kstat_irqs on node -1
r8169 0000:03:00.0: irq 44 for MSI/MSI-X
r8169 0000:03:00.0: eth0: RTL8168b/8111b at 0xf86cc000, 1c:6f:65:85:79:47, XID 0c200000 IRQ 44
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
  alloc irq_desc for 18 on node -1
  alloc kstat_irqs on node -1
r8169 0000:04:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
r8169 0000:04:02.0: (unregistered net_device): no PCI Express capability
r8169 0000:04:02.0: (unregistered net_device): unknown MAC, using family default
r8169 0000:04:02.0: eth1: RTL8169 at 0xf86d0000, 00:13:f7:ef:31:8e, XID 10000000 IRQ 18
rtc_cmos 00:04: RTC can wake from S4
rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
md1: detected capacity change from 0 to 248008540160
 md1: unknown partition table
md1: detected capacity change from 0 to 248008540160
 md1: unknown partition table
Adding 2000088k swap on /dev/sda2.  Priority:-1 extents:1 across:2000088k
Adding 2000088k swap on /dev/sdb2.  Priority:-2 extents:1 across:2000088k
Adding 1296788k swap on /dev/hda2.  Priority:-3 extents:1 across:1296788k
Adding 2104508k swap on /dev/hdb2.  Priority:-4 extents:1 across:2104508k
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
Linux Tulip driver version 1.1.15-NAPI (Feb 27, 2007)
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: [email protected]
REISERFS (device md1): found reiserfs format "3.6" with standard journal
REISERFS (device md1): using ordered data mode
REISERFS (device md1): journal params: device md1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
REISERFS (device md1): checking transaction log (md1)
REISERFS (device md1): Using r5 hash to sort names
r8169 0000:03:00.0: eth0: link up
r8169 0000:03:00.0: eth0: link up
r8169 0000:04:02.0: eth1: link up
ttyS1: LSR safety check engaged!
ttyS1: LSR safety check engaged!
eth0: no IPv6 routers present
eth1: no IPv6 routers present
u32 classifier
    Performance counters on
    input device check on
    Actions configured
ip_tables: (C) 2000-2006 Netfilter Core Team
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
TCP: Peer 0000:0000:0000:0000:0000:ffff:529a:1b44:49774/80 unexpectedly shrunk window 2555240466:2555244672 (repaired)
process `host' is using obsolete setsockopt SO_BSDCOMPAT
TCP: Peer 0000:0000:0000:0000:0000:ffff:55f7:9151:50467/80 unexpectedly shrunk window 2843710738:2843715303 (repaired)
TCP: Peer 0000:0000:0000:0000:0000:ffff:55f7:9151:50467/80 unexpectedly shrunk window 2843710738:2843715303 (repaired)
nfs: server 192.168.1.226 not responding, still trying
nfs: server 192.168.1.226 not responding, still trying
nfs: server 192.168.1.226 not responding, still trying
nfs: server 192.168.1.226 OK
nfs: server 192.168.1.226 OK
nfs: server 192.168.1.226 OK
irq 16: nobody cared (try booting with the "irqpoll" option)
Pid: 0, comm: swapper Not tainted 2.6.35.11 #1
Call Trace:
 [<c1049c3c>] __report_bad_irq+0x2e/0x6f
 [<c1049d72>] note_interrupt+0xf5/0x14b
 [<c1048b27>] ? handle_IRQ_event+0x1d/0x90
 [<c104a39c>] handle_fasteoi_irq+0x84/0xa2
 [<c1003f0a>] handle_irq+0x1a/0x20
 [<c10038ec>] do_IRQ+0x41/0x9a
 [<c1002ae9>] common_interrupt+0x29/0x30
 [<f8628d44>] ? acpi_idle_enter_c1+0xa3/0xba [processor]
 [<c11b6825>] cpuidle_idle_call+0x62/0x95
 [<c10018e7>] cpu_idle+0x44/0x5d
 [<c121b0e5>] rest_init+0x71/0x73
 [<c131c7d7>] start_kernel+0x274/0x279
 [<c131c074>] i386_start_kernel+0x74/0x76
handlers:
[<c1199350>] (ahci_interrupt+0x0/0x51f)
Disabling IRQ #16