API tools faq
paste
Advertisement
Guest User

Untitled

a guest
Apr 5th, 2013
123
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 11.77 KB | None | 0 0
raw download clone embed print report
  1. root@OpenWrt:/# dmesg
  2. [ 0.000000] Linux version 3.3.8 (dani@tool) (gcc version 4.6.3 20120201 (prerelease) (Linaro GCC 4.6-2012.02) ) #11 Fri Apr 5 23:57:50 CEST 2013
  3. [ 0.000000] Detected Broadcom 0x6358 CPU revision a1
  4. [ 0.000000] CPU frequency is 300 MHz
  5. [ 0.000000] 64MB of RAM installed
  6. [ 0.000000] registering 40 GPIOs
  7. [ 0.000000] gpiochip_add: registered GPIOs 0 to 39 on device: bcm63xx-gpio
  8. [ 0.000000] C0 register($16, 0): 0x80008083
  9. [ 0.000000] C0 register($22, 0): 0xe30e1006
  10. [ 0.000000] C0 register($22, 0): 0xe30e1006
  11. [ 0.000000] C0 register($16, 1): 0x3ed96c86
  12. [ 0.000000] board_bcm963xx: Boot address 0xbe000000
  13. [ 0.000000] board_bcm963xx: CFE version: 100.48.56-49.46
  14. [ 0.000000] No bcm_tag found!
  15. [ 0.000000] bootconsole [early0] enabled
  16. [ 0.000000] CPU revision is: 0002a010 (Broadcom BMIPS4350)
  17. [ 0.000000] board_bcm963xx: board name: HW556_C
  18. [ 0.000000] Determined physical RAM map:
  19. [ 0.000000] memory: 04000000 @ 00000000 (usable)
  20. [ 0.000000] Initrd not found or empty - disabling initrd
  21. [ 0.000000] Zone PFN ranges:
  22. [ 0.000000] Normal 0x00000000 -> 0x00004000
  23. [ 0.000000] Movable zone start PFN for each node
  24. [ 0.000000] Early memory PFN ranges
  25. [ 0.000000] 0: 0x00000000 -> 0x00004000
  26. [ 0.000000] On node 0 totalpages: 16384
  27. [ 0.000000] free_area_init_node: node 0, pgdat 8029f7a0, node_mem_map 81000000
  28. [ 0.000000] Normal zone: 128 pages used for memmap
  29. [ 0.000000] Normal zone: 0 pages reserved
  30. [ 0.000000] Normal zone: 16256 pages, LIFO batch:3
  31. [ 0.000000] Reserving 0MB of memory at 0MB for crashkernel
  32. [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
  33. [ 0.000000] pcpu-alloc: [0] 0
  34. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 16256
  35. [ 0.000000] Kernel command line: root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200
  36. [ 0.000000] PID hash table entries: 256 (order: -2, 1024 bytes)
  37. [ 0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
  38. [ 0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
  39. [ 0.000000] Primary instruction cache 16kB, VIPT, 2-way, linesize 16 bytes, 512 sets per way.
  40. [ 0.000000] Primary data cache 16kB, 2-way, VIPT, cache aliases, linesize 16 bytes
  41. [ 0.000000] Memory: 61780k/65536k available (2224k kernel code, 3756k reserved, 398k data, 176k init, 0k highmem)
  42. [ 0.000000] NR_IRQS:128
  43. [ 0.000000] Calibrating delay loop... 297.98 BogoMIPS (lpj=595968)
  44. [ 0.036000] pid_max: default: 32768 minimum: 301
  45. [ 0.040000] Mount-cache hash table entries: 512
  46. [ 0.052000] NET: Registered protocol family 16
  47. [ 0.068000] registering PCI controller with io_map_base unset
  48. [ 0.088000] bio: create slab <bio-0> at 0
  49. [ 0.096000] PCI host bridge to bus 0000:00
  50. [ 0.100000] pci_bus 0000:00: root bus resource [mem 0x30000000-0x37ffffff]
  51. [ 0.104000] pci_bus 0000:00: root bus resource [io 0x8000000-0x800ffff]
  52. [ 0.108000] pci 0000:00:01.0: [168c:ff1d] type 0 class 0x000200
  53. [ 0.108000] pci 0000:00:01.0: reg 10: [mem 0x00000000-0x0000ffff]
  54. [ 0.120000] pci 0000:00:01.0: BAR 0: assigned [mem 0x30000000-0x3000ffff]
  55. [ 0.124000] Switching to clocksource MIPS
  56. [ 0.136000] NET: Registered protocol family 2
  57. [ 0.144000] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
  58. [ 0.152000] TCP established hash table entries: 2048 (order: 2, 16384 bytes)
  59. [ 0.156000] TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
  60. [ 0.164000] TCP: Hash tables configured (established 2048 bind 2048)
  61. [ 0.172000] TCP reno registered
  62. [ 0.176000] UDP hash table entries: 256 (order: 0, 4096 bytes)
  63. [ 0.180000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
  64. [ 0.188000] NET: Registered protocol family 1
  65. [ 0.192000] pci 0000:00:01.0: fixup device configuration
  66. [ 0.200000] PCI: CLS 0 bytes, default 16
  67. [ 0.204000] audit: initializing netlink socket (disabled)
  68. [ 0.212000] type=2000 audit(0.212:1): initialized
  69. [ 0.216000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  70. [ 0.224000] JFFS2 version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
  71. [ 0.236000] msgmni has been set to 120
  72. [ 0.240000] io scheduler noop registered
  73. [ 0.244000] io scheduler deadline registered (default)
  74. [ 0.252000] bcm63xx_uart.0: ttyS0 at MMIO 0xfffe0100 (irq = 10) is a bcm63xx_uart
  75. [ 0.260000] console [ttyS0] enabled, bootconsole disabled
  76. [ 0.276000] physmap platform flash device: 02000000 at 1e000000
  77. [ 0.284000] physmap-flash.0: Found 1 x16 devices at 0x0 in 16-bit bank. Manufacturer ID 0x0000c2 Chip ID 0x00227e
  78. [ 0.292000] physmap-flash.0: Found an alias at 0x1000000 for the chip at 0x0
  79. [ 0.292000] Amd/Fujitsu Extended Query Table at 0x0040
  80. [ 0.300000] Amd/Fujitsu Extended Query version 1.3.
  81. [ 0.304000] number of CFI chips: 1
  82. [ 0.308000] bcm63xxpart: CFE boot tag found with version 8 and board type HW556
  83. [ 0.316000] bcm63xxpart: Partition 0 is CFE offset 0 and length 20000
  84. [ 0.324000] bcm63xxpart: Partition 1 is kernel offset 20100 and length fff00
  85. [ 0.328000] bcm63xxpart: Partition 2 is rootfs offset 120000 and length dc0000
  86. [ 0.336000] bcm63xxpart: Partition 3 is cal_data offset ee0000 and length 20000
  87. [ 0.344000] bcm63xxpart: Partition 4 is nvram offset fe0000 and length 20000
  88. [ 0.352000] bcm63xxpart: Partition 5 is linux offset 20000 and length ec0000
  89. [ 0.360000] bcm63xxpart: Spare partition is offset 3e0004 and length affffc
  90. [ 0.368000] 6 bcm63xxpart partitions found on MTD device physmap-flash.0
  91. [ 0.372000] Creating 6 MTD partitions on "physmap-flash.0":
  92. [ 0.380000] 0x000000000000-0x000000020000 : "CFE"
  93. [ 0.388000] 0x000000020100-0x000000120000 : "kernel"
  94. [ 0.392000] mtd: partition "kernel" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
  95. [ 0.412000] 0x000000120000-0x000000ee0000 : "rootfs"
  96. [ 0.420000] mtd: partition "rootfs" set to be root filesystem
  97. [ 0.424000] mtd: partition "rootfs_data" created automatically, ofs=3E0000, len=B00000
  98. [ 0.432000] 0x0000003e0000-0x000000ee0000 : "rootfs_data"
  99. [ 0.444000] 0x000000ee0000-0x000000f00000 : "cal_data"
  100. [ 0.452000] 0x000000fe0000-0x000001000000 : "nvram"
  101. [ 0.460000] 0x000000020000-0x000000ee0000 : "linux"
  102. [ 0.480000] bcm63xx-wdt bcm63xx-wdt: started, timer margin: 30 sec
  103. [ 0.492000] Registered led device: HW556:red:message
  104. [ 0.492000] Registered led device: HW556:red:hspa
  105. [ 0.492000] Registered led device: HW556:red:dsl
  106. [ 0.492000] Registered led device: HW556:red:power
  107. [ 0.492000] Registered led device: HW556:red:all
  108. [ 0.496000] TCP cubic registered
  109. [ 0.496000] NET: Registered protocol family 17
  110. [ 0.504000] 8021q: 802.1Q VLAN Support v1.8
  111. [ 0.516000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
  112. [ 0.524000] Freeing unused kernel memory: 176k freed
  113. [ 3.208000] eth0: link forced UP - 100/full - flow control off/off
  114. [ 3.448000] roboswitch: Probing device eth0: found a 5325! It's a 5350.
  115. [ 4.508000] There is already a switch registered on the device 'eth0'
  116. [ 5.948000] Button Hotplug driver version 0.4.1
  117. [ 5.980000] input: gpio-keys-polled as /devices/platform/gpio-keys-polled.0/input/input0
  118. [ 9.988000] JFFS2 notice: (352) jffs2_build_xattr_subsystem: complete building xattr subsystem, 1 of xdatum (0 unchecked, 0 orphan) and 9 of xref (0 dead, 2 orphan) found.
  119. [ 13.336000] Compat-drivers backport release: compat-drivers-2012-09-04-2-gddac993
  120. [ 13.344000] Backport based on wireless-testing.git master-2012-09-07
  121. [ 13.352000] compat.git: wireless-testing.git
  122. [ 13.412000] cfg80211: Calling CRDA to update world regulatory domain
  123. [ 13.416000] cfg80211: World regulatory domain updated:
  124. [ 13.424000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
  125. [ 13.432000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  126. [ 13.440000] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
  127. [ 13.448000] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
  128. [ 13.456000] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  129. [ 13.464000] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  130. [ 13.992000] SCSI subsystem initialized
  131. [ 14.072000] There is already a switch registered on the device 'eth0'
  132. [ 14.304000] usbcore: registered new interface driver usbfs
  133. [ 14.312000] usbcore: registered new interface driver hub
  134. [ 14.320000] usbcore: registered new device driver usb
  135. [ 15.328000] PCI: Enabling device 0000:00:01.0 (0000 -> 0002)
  136. [ 15.344000] ath: phy0: eeprom contains invalid mac address: ff:ff:ff:ff:ff:ff
  137. [ 15.352000] ath: phy0: random mac address will be used: da:a2:87:e1:01:c7
  138. [ 15.360000] ath: EEPROM regdomain: 0x0
  139. [ 15.360000] ath: EEPROM indicates default country code should be used
  140. [ 15.360000] ath: doing EEPROM country->regdmn map search
  141. [ 15.360000] ath: country maps to regdmn code: 0x3a
  142. [ 15.360000] ath: Country alpha2 being used: US
  143. [ 15.360000] ath: Regpair used: 0x3a
  144. [ 15.372000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
  145. [ 15.376000] Registered led device: ath9k-phy0
  146. [ 15.376000] ieee80211 phy0: Atheros AR9280 Rev:2 mem=0xc02c0000, irq=39
  147. [ 15.404000] cfg80211: Calling CRDA for country: US
  148. [ 15.408000] cfg80211: Regulatory domain changed to country: US
  149. [ 15.412000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
  150. [ 15.420000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm)
  151. [ 15.428000] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm)
  152. [ 15.436000] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  153. [ 15.444000] cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  154. [ 15.452000] cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  155. [ 15.460000] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm)
  156. [ 16.472000] ip_tables: (C) 2000-2006 Netfilter Core Team
  157. [ 16.916000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  158. [ 17.028000] bcm63xx_ehci bcm63xx_ehci.0: BCM63XX integrated EHCI controller
  159. [ 17.032000] bcm63xx_ehci bcm63xx_ehci.0: new USB bus registered, assigned bus number 1
  160. [ 17.068000] bcm63xx_ehci bcm63xx_ehci.0: irq 18, io mem 0xfffe1300
  161. [ 17.084000] bcm63xx_ehci bcm63xx_ehci.0: USB 2.0 started, EHCI 1.00, overcurrent ignored
  162. [ 17.092000] hub 1-0:1.0: USB hub found
  163. [ 17.096000] hub 1-0:1.0: 2 ports detected
  164. [ 17.240000] nf_conntrack version 0.5.0 (968 buckets, 3872 max)
  165. [ 17.684000] usb 1-1: new high-speed USB device number 2 using bcm63xx_ehci
  166. [ 17.952000] hub 1-1:1.0: USB hub found
  167. [ 17.964000] hub 1-1:1.0: 2 ports detected
  168. [ 17.972000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  169. [ 18.084000] bcm63xx_ohci bcm63xx_ohci.0: BCM63XX integrated OHCI controller
  170. [ 18.088000] bcm63xx_ohci bcm63xx_ohci.0: new USB bus registered, assigned bus number 2
  171. [ 18.096000] bcm63xx_ohci bcm63xx_ohci.0: irq 13, io mem 0xfffe1400
  172. [ 18.164000] hub 2-0:1.0: USB hub found
  173. [ 18.168000] hub 2-0:1.0: 1 port detected
  174. [ 18.360000] Initializing USB Mass Storage driver...
  175. [ 18.368000] usbcore: registered new interface driver usb-storage
  176. [ 18.372000] USB Mass Storage support registered.
  177. [ 22.888000] eth0: link forced UP - 100/full - flow control off/off
  178. [ 22.900000] device eth0 entered promiscuous mode
  179. [ 22.908000] br-lan: port 1(eth0) entered forwarding state
  180. [ 22.912000] br-lan: port 1(eth0) entered forwarding state
  181. [ 24.916000] br-lan: port 1(eth0) entered forwarding state
  182. root@OpenWrt:/#
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!