API tools faq
paste
Advertisement
Guest User

Untitled

a guest
Jun 11th, 2016
333
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 18.46 KB | None | 0 0
raw download clone embed print report
  1. pi@retropie:~ $ dmesg
  2. [ 0.000000] Booting Linux on physical CPU 0x0
  3. [ 0.000000] Initializing cgroup subsys cpuset
  4. [ 0.000000] Initializing cgroup subsys cpu
  5. [ 0.000000] Initializing cgroup subsys cpuacct
  6. [ 0.000000] Linux version 4.4.11-v7+ (dc4@dc4-XPS13-9333) (gcc version 4.9.3 (crosstool-NG crosstool-ng-1.22.0-88-g8460611) ) #888 SMP Mon May 23 20:10:33 BST 2016
  7. [ 0.000000] CPU: ARMv7 Processor [410fd034] revision 4 (ARMv7), cr=10c5383d
  8. [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
  9. [ 0.000000] Machine model: Raspberry Pi 3 Model B Rev 1.2
  10. [ 0.000000] cma: Reserved 8 MiB at 0x2e400000
  11. [ 0.000000] Memory policy: Data cache writealloc
  12. [ 0.000000] On node 0 totalpages: 192512
  13. [ 0.000000] free_area_init_node: node 0, pgdat 808c0dc0, node_mem_map add64000
  14. [ 0.000000] Normal zone: 1692 pages used for memmap
  15. [ 0.000000] Normal zone: 0 pages reserved
  16. [ 0.000000] Normal zone: 192512 pages, LIFO batch:31
  17. [ 0.000000] [bcm2709_smp_init_cpus] enter (9520->f3003010)
  18. [ 0.000000] [bcm2709_smp_init_cpus] ncores=4
  19. [ 0.000000] PERCPU: Embedded 13 pages/cpu @aefaa000 s22592 r8192 d22464 u53248
  20. [ 0.000000] pcpu-alloc: s22592 r8192 d22464 u53248 alloc=13*4096
  21. [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
  22. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 190820
  23. [ 0.000000] Kernel command line: 8250.nr_uarts=0 dma.dmachans=0x7f35 bcm2708_fb.fbwidth=1824 bcm2708_fb.fbheight=984 bcm2709.boardrev=0xa02082 bcm2709.serial=0x8e726ef9 smsc95xx.macaddr=B8:27:EB:72:6E:F9 bcm2708_fb.fbswap=1 bcm2709.uart_clock=48000000 vc_mem.mem_base=0x3dc00000 vc_mem.mem_size=0x3f000000 dwc_otg.lpm_enable=0 console=ttyS0,115200 console=tty1 root=/dev/mmcblk0p2 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet loglevel=3 consoleblank=0
  24. [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
  25. [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
  26. [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
  27. [ 0.000000] Memory: 744204K/770048K available (6344K kernel code, 432K rwdata, 1712K rodata, 476K init, 764K bss, 17652K reserved, 8192K cma-reserved)
  28. [ 0.000000] Virtual kernel memory layout:
  29. vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  30. fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
  31. vmalloc : 0xaf800000 - 0xff800000 (1280 MB)
  32. lowmem : 0x80000000 - 0xaf000000 ( 752 MB)
  33. modules : 0x7f000000 - 0x80000000 ( 16 MB)
  34. .text : 0x80008000 - 0x807e6420 (8058 kB)
  35. .init : 0x807e7000 - 0x8085e000 ( 476 kB)
  36. .data : 0x8085e000 - 0x808ca0c8 ( 433 kB)
  37. .bss : 0x808cd000 - 0x8098c1ac ( 765 kB)
  38. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
  39. [ 0.000000] Hierarchical RCU implementation.
  40. [ 0.000000] Build-time adjustment of leaf fanout to 32.
  41. [ 0.000000] NR_IRQS:16 nr_irqs:16 16
  42. [ 0.000000] Architected cp15 timer(s) running at 19.20MHz (phys).
  43. [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
  44. [ 0.000008] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
  45. [ 0.000025] Switching to timer-based delay loop, resolution 52ns
  46. [ 0.000282] Console: colour dummy device 80x30
  47. [ 0.000481] console [tty1] enabled
  48. [ 0.000506] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
  49. [ 0.000526] pid_max: default: 32768 minimum: 301
  50. [ 0.000837] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
  51. [ 0.000851] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
  52. [ 0.001778] Disabling cpuset control group subsystem
  53. [ 0.001809] Initializing cgroup subsys io
  54. [ 0.001838] Initializing cgroup subsys memory
  55. [ 0.001876] Initializing cgroup subsys devices
  56. [ 0.001897] Initializing cgroup subsys freezer
  57. [ 0.001917] Initializing cgroup subsys net_cls
  58. [ 0.001965] CPU: Testing write buffer coherency: ok
  59. [ 0.002026] ftrace: allocating 21205 entries in 63 pages
  60. [ 0.051161] CPU0: update cpu_capacity 1024
  61. [ 0.051192] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
  62. [ 0.051205] [bcm2709_smp_prepare_cpus] enter
  63. [ 0.051337] Setting up static identity map for 0x8240 - 0x8274
  64. [ 0.052991] [bcm2709_boot_secondary] cpu:1 started (0) 18
  65. [ 0.053318] [bcm2709_secondary_init] enter cpu:1
  66. [ 0.053360] CPU1: update cpu_capacity 1024
  67. [ 0.053366] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
  68. [ 0.053746] [bcm2709_boot_secondary] cpu:2 started (0) 17
  69. [ 0.054005] [bcm2709_secondary_init] enter cpu:2
  70. [ 0.054025] CPU2: update cpu_capacity 1024
  71. [ 0.054031] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
  72. [ 0.054394] [bcm2709_boot_secondary] cpu:3 started (0) 18
  73. [ 0.054576] [bcm2709_secondary_init] enter cpu:3
  74. [ 0.054596] CPU3: update cpu_capacity 1024
  75. [ 0.054602] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
  76. [ 0.054662] Brought up 4 CPUs
  77. [ 0.054685] SMP: Total of 4 processors activated (153.60 BogoMIPS).
  78. [ 0.054693] CPU: All CPU(s) started in HYP mode.
  79. [ 0.054701] CPU: Virtualization extensions available.
  80. [ 0.055308] devtmpfs: initialized
  81. [ 0.065519] VFP support v0.3: implementor 41 architecture 3 part 40 variant 3 rev 4
  82. [ 0.065838] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
  83. [ 0.066533] pinctrl core: initialized pinctrl subsystem
  84. [ 0.067062] NET: Registered protocol family 16
  85. [ 0.072288] DMA: preallocated 4096 KiB pool for atomic coherent allocations
  86. [ 0.079070] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
  87. [ 0.079081] hw-breakpoint: maximum watchpoint size is 8 bytes.
  88. [ 0.079238] Serial: AMBA PL011 UART driver
  89. [ 0.079371] uart-pl011 3f201000.uart: could not find pctldev for node /soc/gpio@7e200000/uart0_pins, deferring probe
  90. [ 0.079536] bcm2835-mbox 3f00b880.mailbox: mailbox enabled
  91. [ 0.141829] bcm2835-dma 3f007000.dma: DMA legacy API manager at f3007000, dmachans=0x1
  92. [ 0.143460] SCSI subsystem initialized
  93. [ 0.143636] usbcore: registered new interface driver usbfs
  94. [ 0.143723] usbcore: registered new interface driver hub
  95. [ 0.143820] usbcore: registered new device driver usb
  96. [ 0.150719] raspberrypi-firmware soc:firmware: Attached to firmware from 2016-05-20 19:01
  97. [ 0.178020] clocksource: Switched to clocksource arch_sys_counter
  98. [ 0.223259] FS-Cache: Loaded
  99. [ 0.223541] CacheFiles: Loaded
  100. [ 0.235760] NET: Registered protocol family 2
  101. [ 0.236612] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
  102. [ 0.236726] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
  103. [ 0.236915] TCP: Hash tables configured (established 8192 bind 8192)
  104. [ 0.237006] UDP hash table entries: 512 (order: 2, 16384 bytes)
  105. [ 0.237052] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
  106. [ 0.237288] NET: Registered protocol family 1
  107. [ 0.237593] RPC: Registered named UNIX socket transport module.
  108. [ 0.237603] RPC: Registered udp transport module.
  109. [ 0.237611] RPC: Registered tcp transport module.
  110. [ 0.237619] RPC: Registered tcp NFSv4.1 backchannel transport module.
  111. [ 0.238760] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 7 counters available
  112. [ 0.240096] futex hash table entries: 1024 (order: 4, 65536 bytes)
  113. [ 0.253178] VFS: Disk quotas dquot_6.6.0
  114. [ 0.253478] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  115. [ 0.255766] FS-Cache: Netfs 'nfs' registered for caching
  116. [ 0.256648] NFS: Registering the id_resolver key type
  117. [ 0.256695] Key type id_resolver registered
  118. [ 0.256704] Key type id_legacy registered
  119. [ 0.259028] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
  120. [ 0.259155] io scheduler noop registered
  121. [ 0.259175] io scheduler deadline registered (default)
  122. [ 0.259227] io scheduler cfq registered
  123. [ 0.261773] BCM2708FB: allocated DMA memory ee800000
  124. [ 0.261799] BCM2708FB: allocated DMA channel 0 @ f3007000
  125. [ 0.288405] Console: switching to colour frame buffer device 228x61
  126. [ 1.453843] bcm2835-rng 3f104000.rng: hwrng registered
  127. [ 1.453982] vc-cma: Videocore CMA driver
  128. [ 1.453993] vc-cma: vc_cma_base = 0x00000000
  129. [ 1.454003] vc-cma: vc_cma_size = 0x00000000 (0 MiB)
  130. [ 1.454011] vc-cma: vc_cma_initial = 0x00000000 (0 MiB)
  131. [ 1.454231] vc-mem: phys_addr:0x00000000 mem_base=0x3dc00000 mem_size:0x3f000000(1008 MiB)
  132. [ 1.468889] brd: module loaded
  133. [ 1.477408] loop: module loaded
  134. [ 1.478364] vchiq: vchiq_init_state: slot_zero = 0xae880000, is_master = 0
  135. [ 1.479835] Loading iSCSI transport class v2.0-870.
  136. [ 1.480477] usbcore: registered new interface driver smsc95xx
  137. [ 1.480529] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
  138. [ 1.680793] Core Release: 2.80a
  139. [ 1.680811] Setting default values for core params
  140. [ 1.680845] Finished setting default values for core params
  141. [ 1.881204] Using Buffer DMA mode
  142. [ 1.881214] Periodic Transfer Interrupt Enhancement - disabled
  143. [ 1.881223] Multiprocessor Interrupt Enhancement - disabled
  144. [ 1.881232] OTG VER PARAM: 0, OTG VER FLAG: 0
  145. [ 1.881246] Dedicated Tx FIFOs mode
  146. [ 1.881553] WARN::dwc_otg_hcd_init:1047: FIQ DMA bounce buffers: virt = 0xae814000 dma = 0xee814000 len=9024
  147. [ 1.881584] FIQ FSM acceleration enabled for :
  148. Non-periodic Split Transactions
  149. Periodic Split Transactions
  150. High-Speed Isochronous Endpoints
  151. Interrupt/Control Split Transaction hack enabled
  152. [ 1.881606] dwc_otg: Microframe scheduler enabled
  153. [ 1.881651] WARN::hcd_init_fiq:413: FIQ on core 1 at 0x804464e4
  154. [ 1.881665] WARN::hcd_init_fiq:414: FIQ ASM at 0x80446854 length 36
  155. [ 1.881679] WARN::hcd_init_fiq:439: MPHI regs_base at 0xb02fe000
  156. [ 1.881739] dwc_otg 3f980000.usb: DWC OTG Controller
  157. [ 1.881775] dwc_otg 3f980000.usb: new USB bus registered, assigned bus number 1
  158. [ 1.881810] dwc_otg 3f980000.usb: irq 62, io mem 0x00000000
  159. [ 1.881859] Init: Port Power? op_state=1
  160. [ 1.881867] Init: Power Port (0)
  161. [ 1.882070] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  162. [ 1.882084] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  163. [ 1.882097] usb usb1: Product: DWC OTG Controller
  164. [ 1.882109] usb usb1: Manufacturer: Linux 4.4.11-v7+ dwc_otg_hcd
  165. [ 1.882121] usb usb1: SerialNumber: 3f980000.usb
  166. [ 1.882897] hub 1-0:1.0: USB hub found
  167. [ 1.882939] hub 1-0:1.0: 1 port detected
  168. [ 1.883538] dwc_otg: FIQ enabled
  169. [ 1.883547] dwc_otg: NAK holdoff enabled
  170. [ 1.883555] dwc_otg: FIQ split-transaction FSM enabled
  171. [ 1.883593] Module dwc_common_port init
  172. [ 1.883837] usbcore: registered new interface driver usb-storage
  173. [ 1.884097] mousedev: PS/2 mouse device common for all mice
  174. [ 1.884808] bcm2835-cpufreq: min=600000 max=1200000
  175. [ 1.885093] sdhci: Secure Digital Host Controller Interface driver
  176. [ 1.885101] sdhci: Copyright(c) Pierre Ossman
  177. [ 1.885416] sdhost: log_buf @ ae813000 (ee813000)
  178. [ 1.958050] mmc0: sdhost-bcm2835 loaded - DMA enabled (>1)
  179. [ 1.960302] mmc-bcm2835 3f300000.mmc: mmc_debug:0 mmc_debug2:0
  180. [ 1.960316] mmc-bcm2835 3f300000.mmc: DMA channel allocated
  181. [ 2.018131] sdhci-pltfm: SDHCI platform and OF driver helper
  182. [ 2.018543] ledtrig-cpu: registered to indicate activity on CPUs
  183. [ 2.018666] hidraw: raw HID events driver (C) Jiri Kosina
  184. [ 2.018866] usbcore: registered new interface driver usbhid
  185. [ 2.018875] usbhid: USB HID core driver
  186. [ 2.019427] Initializing XFRM netlink socket
  187. [ 2.019459] NET: Registered protocol family 17
  188. [ 2.019591] Key type dns_resolver registered
  189. [ 2.020165] Registering SWP/SWPB emulation handler
  190. [ 2.020934] registered taskstats version 1
  191. [ 2.021129] vc-sm: Videocore shared memory driver
  192. [ 2.021143] [vc_sm_connected_init]: start
  193. [ 2.021598] [vc_sm_connected_init]: end - returning 0
  194. [ 2.022962] 3f201000.uart: ttyAMA0 at MMIO 0x3f201000 (irq = 87, base_baud = 0) is a PL011 rev2
  195. [ 2.023366] of_cfs_init
  196. [ 2.023446] of_cfs_init: OK
  197. [ 2.024288] Waiting for root device /dev/mmcblk0p2...
  198. [ 2.056205] mmc0: host does not support reading read-only switch, assuming write-enable
  199. [ 2.059186] mmc0: new high speed SDHC card at address aaaa
  200. [ 2.059744] mmcblk0: mmc0:aaaa SL16G 14.8 GiB
  201. [ 2.062216] mmcblk0: p1 p2
  202. [ 2.078130] Indeed it is in host mode hprt0 = 00021501
  203. [ 2.080090] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
  204. [ 2.081649] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
  205. [ 2.083200] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
  206. [ 2.085979] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
  207. [ 2.130260] EXT4-fs (mmcblk0p2): INFO: recovery required on readonly filesystem
  208. [ 2.130273] EXT4-fs (mmcblk0p2): write access will be enabled during recovery
  209. [ 2.176610] mmc1: new high speed SDIO card at address 0001
  210. [ 2.229374] EXT4-fs (mmcblk0p2): orphan cleanup on readonly fs
  211. [ 2.232463] EXT4-fs (mmcblk0p2): 3 orphan inodes deleted
  212. [ 2.232475] EXT4-fs (mmcblk0p2): recovery complete
  213. [ 2.258057] usb 1-1: new high-speed USB device number 2 using dwc_otg
  214. [ 2.258192] Indeed it is in host mode hprt0 = 00001101
  215. [ 2.458302] usb 1-1: New USB device found, idVendor=0424, idProduct=9514
  216. [ 2.458317] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
  217. [ 2.459058] hub 1-1:1.0: USB hub found
  218. [ 2.459156] hub 1-1:1.0: 5 ports detected
  219. [ 2.516313] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
  220. [ 2.516361] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
  221. [ 2.517654] devtmpfs: mounted
  222. [ 2.518432] Freeing unused kernel memory: 476K (807e7000 - 8085e000)
  223. [ 2.735708] random: systemd urandom read with 69 bits of entropy available
  224. [ 2.738091] usb 1-1.1: new high-speed USB device number 3 using dwc_otg
  225. [ 2.838429] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00
  226. [ 2.838450] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
  227. [ 2.841362] smsc95xx v1.0.4
  228. [ 2.845564] NET: Registered protocol family 10
  229. [ 2.901441] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:72:6e:f9
  230. [ 2.978096] usb 1-1.2: new low-speed USB device number 4 using dwc_otg
  231. [ 3.082343] usb 1-1.2: New USB device found, idVendor=0079, idProduct=0011
  232. [ 3.082366] usb 1-1.2: New USB device strings: Mfr=0, Product=2, SerialNumber=0
  233. [ 3.082379] usb 1-1.2: Product: USB Gamepad
  234. [ 3.295687] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
  235. [ 3.496335] fuse init (API version 7.23)
  236. [ 3.893520] systemd-udevd[151]: starting version 215
  237. [ 4.283466] gpiomem-bcm2835 3f200000.gpiomem: Initialised: Registers at 0x3f200000
  238. [ 4.293113] bcm2835-wdt 3f100000.watchdog: Broadcom BCM2835 watchdog timer
  239. [ 4.453587] input: USB Gamepad as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.2/1-1.2:1.0/0003:0079:0011.0001/input/input0
  240. [ 4.454107] dragonrise 0003:0079:0011.0001: input,hidraw0: USB HID v1.10 Joystick [USB Gamepad ] on usb-3f980000.usb-1.2/input0
  241. [ 4.620417] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
  242. [ 4.653936] brcmfmac: brcmf_sdio_drivestrengthinit: No SDIO Drive strength init done for chip 43430 rev 1 pmurev 24
  243. [ 4.654568] usbcore: registered new interface driver brcmfmac
  244. [ 4.790478] random: nonblocking pool is initialized
  245. [ 4.812248] brcmfmac: brcmf_c_preinit_dcmds: Firmware version = wl0: May 27 2016 00:13:38 version 7.45.41.26 (r640327) FWID 01-df77e4a7
  246. [ 4.841056] brcmfmac: brcmf_cfg80211_reg_notifier: not a ISO3166 code
  247. [ 4.990682] brcmfmac: brcmf_cfg80211_reg_notifier: not a ISO3166 code
  248. [ 4.990713] cfg80211: World regulatory domain updated:
  249. [ 4.990723] cfg80211: DFS Master region: unset
  250. [ 4.990732] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
  251. [ 4.990747] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
  252. [ 4.990759] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
  253. [ 4.990771] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
  254. [ 4.990786] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
  255. [ 4.990800] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
  256. [ 4.990812] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
  257. [ 4.990824] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
  258. [ 4.990837] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
  259. [ 5.207043] systemd-journald[127]: Received request to flush runtime journal from PID 1
  260. [ 5.534107] brcmfmac: brcmf_add_if: ERROR: netdev:wlan0 already exists
  261. [ 5.534133] brcmfmac: brcmf_add_if: ignore IF event
  262. [ 5.539558] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
  263. [ 5.539591] brcmfmac: power management disabled
  264. [ 6.563553] Adding 102396k swap on /var/swap. Priority:-1 extents:3 across:114688k SSFS
  265. [ 6.839256] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup
  266. [ 6.839381] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
  267. [ 7.191650] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
  268. [ 618.888901] Bluetooth: Core ver 2.21
  269. [ 618.888953] NET: Registered protocol family 31
  270. [ 618.888958] Bluetooth: HCI device and connection manager initialized
  271. [ 618.888972] Bluetooth: HCI socket layer initialized
  272. [ 618.888981] Bluetooth: L2CAP socket layer initialized
  273. [ 618.889003] Bluetooth: SCO socket layer initialized
  274. [ 618.905348] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
  275. [ 618.905361] Bluetooth: BNEP filters: protocol multicast
  276. [ 618.905376] Bluetooth: BNEP socket layer initialized
  277. [ 2982.879428] usb 1-1.4: new low-speed USB device number 5 using dwc_otg
  278. [ 2982.983499] usb 1-1.4: New USB device found, idVendor=192f, idProduct=0416
  279. [ 2982.983527] usb 1-1.4: New USB device strings: Mfr=0, Product=2, SerialNumber=0
  280. [ 2982.983540] usb 1-1.4: Product: USB Optical Mouse
  281. [ 2982.990680] input: USB Optical Mouse as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.4/1-1.4:1.0/0003:192F:0416.0002/input/input1
  282. [ 2982.991472] hid-generic 0003:192F:0416.0002: input,hidraw1: USB HID v1.11 Mouse [USB Optical Mouse] on usb-3f980000.usb-1.4/input0
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!