Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- root@arm:~# dmesg -r
- <6>[ 0.000000] Booting Linux on physical CPU 0x0
- <6>[ 0.000000] Initializing cgroup subsys cpu
- <6>[ 0.000000] Initializing cgroup subsys cpuacct
- <5>[ 0.000000] Linux version 3.12.8+ (corro@CORRO-VB) (gcc version 4.8.2 20131014 (prerelease) (crosstool-NG linaro-1.13.1-4.8-2013.10 - Linaro GCC 2013.10) ) #1 SMP Mon Jan 20 13:07:07 EST 2014
- <4>[ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c5387d
- <4>[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
- <6>[ 0.000000] Machine: Generic AM33XX (Flattened Device Tree), model: TI AM335x BeagleBone
- <4>[ 0.000000] Memory policy: ECC disabled, Data cache writeback
- <7>[ 0.000000] On node 0 totalpages: 130816
- <7>[ 0.000000] free_area_init_node: node 0, pgdat c0721800, node_mem_map c077f000
- <7>[ 0.000000] Normal zone: 1024 pages used for memmap
- <7>[ 0.000000] Normal zone: 0 pages reserved
- <7>[ 0.000000] Normal zone: 130816 pages, LIFO batch:31
- <6>[ 0.000000] CPU: All CPU(s) started in SVC mode.
- <6>[ 0.000000] AM335X ES2.0 (sgx neon )
- <6>[ 0.000000] PERCPU: Embedded 8 pages/cpu @c0b8d000 s9344 r8192 d15232 u32768
- <7>[ 0.000000] pcpu-alloc: s9344 r8192 d15232 u32768 alloc=8*4096
- <7>[ 0.000000] pcpu-alloc: [0] 0
- <4>[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129792
- <5>[ 0.000000] Kernel command line: console=ttyO0,115200n8 root=/dev/mmcblk0p2 ro rootfstype=ext4 rootwait fixrtc
- <6>[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
- <6>[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
- <6>[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
- <6>[ 0.000000] allocated 1048576 bytes of page_cgroup
- <6>[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
- <4>[ 0.000000] Memory: 509948K/523264K available (4794K kernel code, 409K rwdata, 1816K rodata, 245K init, 370K bss, 13316K reserved, 0K highmem)
- <5>[ 0.000000] Virtual kernel memory layout:
- <5>[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
- <5>[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
- <5>[ 0.000000] vmalloc : 0xe0800000 - 0xff000000 ( 488 MB)
- <5>[ 0.000000] lowmem : 0xc0000000 - 0xe0000000 ( 512 MB)
- <5>[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
- <5>[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
- <5>[ 0.000000] .text : 0xc0008000 - 0xc067ce34 (6612 kB)
- <5>[ 0.000000] .init : 0xc067d000 - 0xc06ba480 ( 246 kB)
- <5>[ 0.000000] .data : 0xc06bc000 - 0xc0722420 ( 410 kB)
- <5>[ 0.000000] .bss : 0xc0722428 - 0xc077ee08 ( 371 kB)
- <6>[ 0.000000] Hierarchical RCU implementation.
- <6>[ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=1.
- <6>[ 0.000000] NR_IRQS:16 nr_irqs:16 16
- <6>[ 0.000000] IRQ: Found an INTC at 0xfa200000 (revision 5.0) with 128 interrupts
- <6>[ 0.000000] Total of 128 interrupts on 1 active controller
- <6>[ 0.000000] OMAP clockevent source: timer2 at 24000000 Hz
- <6>[ 0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms
- <6>[ 0.000000] OMAP clocksource: timer1 at 24000000 Hz
- <6>[ 0.000000] Console: colour dummy device 80x30
- <6>[ 0.000312] Calibrating delay loop... 663.55 BogoMIPS (lpj=1327104)
- <6>[ 0.027779] pid_max: default: 32768 minimum: 301
- <6>[ 0.027911] Security Framework initialized
- <6>[ 0.027975] Mount-cache hash table entries: 512
- <6>[ 0.033913] Initializing cgroup subsys memory
- <6>[ 0.033979] Initializing cgroup subsys devices
- <6>[ 0.033992] Initializing cgroup subsys freezer
- <6>[ 0.034004] Initializing cgroup subsys blkio
- <6>[ 0.034083] CPU: Testing write buffer coherency: ok
- <6>[ 0.034498] CPU0: thread -1, cpu 0, socket -1, mpidr 0
- <6>[ 0.034554] Setting up static identity map for 0xc04895b0 - 0xc0489608
- <6>[ 0.035464] Brought up 1 CPUs
- <6>[ 0.035476] SMP: Total of 1 processors activated.
- <6>[ 0.035484] CPU: All CPU(s) started in SVC mode.
- <6>[ 0.036353] devtmpfs: initialized
- <6>[ 0.040476] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
- <4>[ 0.045373] omap_hwmod: debugss: _wait_target_disable failed
- <6>[ 0.098392] pinctrl core: initialized pinctrl subsystem
- <6>[ 0.098788] regulator-dummy: no parameters
- <6>[ 0.099149] NET: Registered protocol family 16
- <6>[ 0.099637] DMA: preallocated 256 KiB pool for atomic coherent allocations
- <6>[ 0.100126] cpuidle: using governor ladder
- <6>[ 0.100140] cpuidle: using governor menu
- <6>[ 0.105320] pinctrl-single 44e10800.pinmux: 142 pins at pa f9e10800 size 568
- <4>[ 0.105796] platform 49000000.edma: alias fck already exists
- <4>[ 0.105814] platform 49000000.edma: alias fck already exists
- <4>[ 0.105828] platform 49000000.edma: alias fck already exists
- <7>[ 0.106191] gpiochip_add: registered GPIOs 0 to 31 on device: gpio
- <6>[ 0.106637] OMAP GPIO hardware version 0.1
- <7>[ 0.107229] gpiochip_add: registered GPIOs 32 to 63 on device: gpio
- <7>[ 0.108067] gpiochip_add: registered GPIOs 64 to 95 on device: gpio
- <7>[ 0.108823] gpiochip_add: registered GPIOs 96 to 127 on device: gpio
- <6>[ 0.113003] hw-breakpoint: debug architecture 0x4 unsupported.
- <6>[ 0.114136] cpsw.1: No hwaddr in dt. Using 90:59:af:68:59:fd from efuse
- <6>[ 0.119567] bio: create slab <bio-0> at 0
- <6>[ 0.125841] edma-dma-engine edma-dma-engine.0: TI EDMA DMA engine driver
- <7>[ 0.126167] of_get_named_gpio_flags: can't parse gpios property of node '/fixedregulator@0[0]'
- <6>[ 0.126306] vmmcsd_fixed: 3300 mV
- <5>[ 0.127619] SCSI subsystem initialized
- <6>[ 0.127954] usbcore: registered new interface driver usbfs
- <6>[ 0.128035] usbcore: registered new interface driver hub
- <6>[ 0.128257] usbcore: registered new device driver usb
- <6>[ 0.130673] DCDC1: at 1500 mV
- <6>[ 0.131531] vdd_mpu: 925 <--> 1325 mV at 1325 mV
- <6>[ 0.132412] vdd_core: 925 <--> 1150 mV at 1125 mV
- <6>[ 0.133235] LDO1: at 1800 mV
- <6>[ 0.134034] LDO2: at 3300 mV
- <6>[ 0.135405] LDO3: 1800 mV
- <6>[ 0.136243] LDO4: at 3300 mV
- <6>[ 0.136738] tps65217 0-0024: TPS65217 ID 0xe version 1.2
- <6>[ 0.137270] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz
- <6>[ 0.139282] omap_i2c 4819c000.i2c: bus 1 rev0.11 at 100 kHz
- <6>[ 0.139915] Advanced Linux Sound Architecture Driver Initialized.
- <6>[ 0.141032] Switched to clocksource timer1
- <6>[ 0.150804] NET: Registered protocol family 2
- <6>[ 0.151585] TCP established hash table entries: 4096 (order: 3, 32768 bytes)
- <6>[ 0.151668] TCP bind hash table entries: 4096 (order: 4, 81920 bytes)
- <6>[ 0.151758] TCP: Hash tables configured (established 4096 bind 4096)
- <6>[ 0.151839] TCP: reno registered
- <6>[ 0.151858] UDP hash table entries: 256 (order: 1, 12288 bytes)
- <6>[ 0.151883] UDP-Lite hash table entries: 256 (order: 1, 12288 bytes)
- <6>[ 0.152171] NET: Registered protocol family 1
- <6>[ 0.152606] RPC: Registered named UNIX socket transport module.
- <6>[ 0.152620] RPC: Registered udp transport module.
- <6>[ 0.152627] RPC: Registered tcp transport module.
- <6>[ 0.152634] RPC: Registered tcp NFSv4.1 backchannel transport module.
- <6>[ 0.154570] audit: initializing netlink socket (disabled)
- <5>[ 0.154636] type=2000 audit(0.152:1): initialized
- <5>[ 0.156162] VFS: Disk quotas dquot_6.5.2
- <4>[ 0.156311] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
- <5>[ 0.157314] NFS: Registering the id_resolver key type
- <5>[ 0.157391] Key type id_resolver registered
- <5>[ 0.157402] Key type id_legacy registered
- <6>[ 0.157458] msgmni has been set to 995
- <6>[ 0.159788] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
- <6>[ 0.159976] io scheduler noop registered
- <6>[ 0.159986] io scheduler deadline registered
- <6>[ 0.160023] io scheduler cfq registered (default)
- <6>[ 0.161302] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
- <7>[ 0.162533] of_get_named_gpio_flags: can't parse gpios property of node '/ocp/serial@44e09000[0]'
- <6>[ 0.162791] 44e09000.serial: ttyO0 at MMIO 0x44e09000 (irq = 88, base_baud = 3000000) is a OMAP UART0
- <6>[ 0.819170] console [ttyO0] enabled
- <7>[ 0.823388] of_get_named_gpio_flags: can't parse gpios property of node '/ocp/serial@48022000[0]'
- <6>[ 0.823632] 48022000.serial: ttyO1 at MMIO 0x48022000 (irq = 89, base_baud = 3000000) is a OMAP UART1
- <6>[ 0.841468] brd: module loaded
- <6>[ 0.848662] loop: module loaded
- <6>[ 0.852147] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
- <6>[ 0.859476] at24 1-0054: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
- <6>[ 0.866795] at24 1-0055: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
- <6>[ 0.874101] at24 1-0056: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
- <6>[ 0.881400] at24 1-0057: 32768 byte 24c256 EEPROM, writable, 1 bytes/write
- <6>[ 0.891263] edma-dma-engine edma-dma-engine.0: allocated channel for 0:17
- <6>[ 0.898537] edma-dma-engine edma-dma-engine.0: allocated channel for 0:16
- <6>[ 0.906612] libphy: Fixed MDIO Bus: probed
- <6>[ 0.912004] usbcore: registered new interface driver usbserial
- <3>[ 0.920094] musb-hdrc musb-hdrc.0.auto: Falied to request rx1.
- <7>[ 0.926333] musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn)
- <7>[ 0.926345] musb-hdrc: MHDRC RTL version 2.0
- <7>[ 0.926354] musb-hdrc: setup fifo_mode 4
- <7>[ 0.926371] musb-hdrc: 28/31 max ep, 16384/16384 memory
- <6>[ 0.926431] musb-hdrc musb-hdrc.0.auto: MUSB HDRC host driver
- <6>[ 0.932851] musb-hdrc musb-hdrc.0.auto: new USB bus registered, assigned bus number 1
- <6>[ 0.941390] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
- <6>[ 0.948586] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- <6>[ 0.956214] usb usb1: Product: MUSB HDRC host driver
- <6>[ 0.961460] usb usb1: Manufacturer: Linux 3.12.8+ musb-hcd
- <6>[ 0.967250] usb usb1: SerialNumber: musb-hdrc.0.auto
- <6>[ 0.973139] hub 1-0:1.0: USB hub found
- <6>[ 0.977188] hub 1-0:1.0: 1 port detected
- <3>[ 0.983021] musb-hdrc musb-hdrc.1.auto: Falied to request rx1.
- <7>[ 0.989252] musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn)
- <7>[ 0.989264] musb-hdrc: MHDRC RTL version 2.0
- <7>[ 0.989272] musb-hdrc: setup fifo_mode 4
- <7>[ 0.989285] musb-hdrc: 28/31 max ep, 16384/16384 memory
- <6>[ 0.989336] musb-hdrc musb-hdrc.1.auto: MUSB HDRC host driver
- <6>[ 0.995694] musb-hdrc musb-hdrc.1.auto: new USB bus registered, assigned bus number 2
- <6>[ 1.004186] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
- <6>[ 1.011374] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- <6>[ 1.019004] usb usb2: Product: MUSB HDRC host driver
- <6>[ 1.024250] usb usb2: Manufacturer: Linux 3.12.8+ musb-hcd
- <6>[ 1.030040] usb usb2: SerialNumber: musb-hdrc.1.auto
- <6>[ 1.035860] hub 2-0:1.0: USB hub found
- <6>[ 1.039872] hub 2-0:1.0: 1 port detected
- <6>[ 1.051024] mousedev: PS/2 mouse device common for all mice
- <6>[ 1.057806] omap_rtc 44e3e000.rtc: rtc core: registered 44e3e000.rtc as rtc0
- <6>[ 1.065346] 44e3e000.rtc: already running
- <6>[ 1.069789] i2c /dev entries driver
- <6>[ 1.074079] Driver for 1-wire Dallas network protocol.
- <6>[ 1.080686] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec
- <7>[ 1.088484] of_get_named_gpio_flags exited with status 6
- <7>[ 1.088498] of_get_named_gpio_flags: can't parse gpios property of node '/ocp/mmc@48060000[0]'
- <7>[ 1.088511] of_get_named_gpio_flags: can't parse gpios property of node '/ocp/mmc@48060000[0]'
- <6>[ 1.088717] edma-dma-engine edma-dma-engine.0: allocated channel for 0:25
- <6>[ 1.095947] edma-dma-engine edma-dma-engine.0: allocated channel for 0:24
- <7>[ 1.133243] of_get_named_gpio_flags: can't parse gpios property of node '/ocp/mmc@481d8000[0]'
- <7>[ 1.133262] of_get_named_gpio_flags: can't parse gpios property of node '/ocp/mmc@481d8000[0]'
- <7>[ 1.133275] of_get_named_gpio_flags: can't parse gpios property of node '/ocp/mmc@481d8000[0]'
- <6>[ 1.133418] edma-dma-engine edma-dma-engine.0: allocated channel for 0:3
- <6>[ 1.140601] edma-dma-engine edma-dma-engine.0: allocated channel for 0:2
- <4>[ 1.180506] mmc0: host does not support reading read-only switch. assuming write-enable.
- <7>[ 1.189235] of_get_named_gpio_flags: can't parse gpios property of node '/ocp/mmc@47810000[0]'
- <7>[ 1.189248] of_get_named_gpio_flags: can't parse gpios property of node '/ocp/mmc@47810000[0]'
- <7>[ 1.189267] of_get_named_gpio_flags exited with status 7
- <6>[ 1.189546] edma-dma-engine edma-dma-engine.0: allocated channel for 0:33
- <6>[ 1.196852] edma-dma-engine edma-dma-engine.0: allocated channel for 0:32
- <6>[ 1.204132] mmc0: new high speed SD card at address 0002
- <6>[ 1.210646] mmcblk0: mmc0:0002 00000 1.83 GiB
- <6>[ 1.216764] mmcblk0: p1 p2
- <7>[ 1.241471] of_get_named_gpio_flags exited with status 53
- <7>[ 1.241491] of_get_named_gpio_flags exited with status 54
- <7>[ 1.241502] of_get_named_gpio_flags exited with status 55
- <7>[ 1.241512] of_get_named_gpio_flags exited with status 56
- <7>[ 1.241530] of_get_named_gpio_flags exited with status 53
- <7>[ 1.241720] of_get_named_gpio_flags exited with status 54
- <7>[ 1.241840] of_get_named_gpio_flags exited with status 55
- <7>[ 1.241934] of_get_named_gpio_flags exited with status 56
- <6>[ 1.242322] ledtrig-cpu: registered to indicate activity on CPUs
- <6>[ 1.249279] hidraw: raw HID events driver (C) Jiri Kosina
- <6>[ 1.255197] usbcore: registered new interface driver usbhid
- <6>[ 1.261114] usbhid: USB HID core driver
- <3>[ 1.266543] i2s_evm sound.7: ASoC: CPU DAI (null) not registered
- <3>[ 1.273104] i2s_evm sound.7: snd_soc_register_card failed (-517)
- <6>[ 1.279575] platform sound.7: Driver i2s_evm requests probe deferral
- <6>[ 1.287116] TCP: cubic registered
- <6>[ 1.290717] Initializing XFRM netlink socket
- <6>[ 1.295255] mmc1: BKOPS_EN bit is not set
- <6>[ 1.299535] NET: Registered protocol family 17
- <6>[ 1.304297] NET: Registered protocol family 15
- <5>[ 1.309397] Key type dns_resolver registered
- <4>[ 1.314062] mux: Failed to setup hwmod io irq -22
- <3>[ 1.319749] /cpus/cpu@0: could not find phandle
- <6>[ 1.324942] mmc1: new high speed MMC card at address 0001
- <6>[ 1.330857] ThumbEE CPU extension supported.
- <6>[ 1.336072] mmcblk1: mmc1:0001 MMC02G 1.78 GiB
- <5>[ 1.340915] Registering SWP/SWPB emulation handler
- <6>[ 1.346324] mmcblk1boot0: mmc1:0001 MMC02G partition 1 1.00 MiB
- <6>[ 1.353169] registered taskstats version 1
- <6>[ 1.358470] mmcblk1boot1: mmc1:0001 MMC02G partition 2 1.00 MiB
- <6>[ 1.365824] i2s_evm sound.7: iis-hifi <-> 48038000.mcasp mapping ok
- <7>[ 1.374169] of_get_named_gpio_flags exited with status 59
- <6>[ 1.388569] mmcblk1: p1 p2
- <6>[ 1.393726] mmcblk1boot1: unknown partition table
- <6>[ 1.400372] mmcblk1boot0: unknown partition table
- <6>[ 1.429060] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6
- <6>[ 1.435529] davinci_mdio 4a101000.mdio: detected phy mask fffffffe
- <6>[ 1.442976] libphy: 4a101000.mdio: probed
- <6>[ 1.447262] davinci_mdio 4a101000.mdio: phy[0]: device 4a101000.mdio:00, driver SMSC LAN8710/LAN8720
- <6>[ 1.457163] Detected MACID = 90:59:af:68:59:fb
- <6>[ 1.464937] mmc2: new high speed SDIO card at address 0001
- <6>[ 1.471621] omap_rtc 44e3e000.rtc: setting system clock to 2014-01-20 18:11:44 UTC (1390241504)
- <6>[ 1.486108] ALSA device list:
- <6>[ 1.489330] #0: I2S generic
- <6>[ 1.495814] EXT4-fs (mmcblk0p2): INFO: recovery required on readonly filesystem
- <6>[ 1.503619] EXT4-fs (mmcblk0p2): write access will be enabled during recovery
- <6>[ 5.226803] EXT4-fs (mmcblk0p2): orphan cleanup on readonly fs
- <6>[ 5.234791] EXT4-fs (mmcblk0p2): 13 orphan inodes deleted
- <6>[ 5.240558] EXT4-fs (mmcblk0p2): recovery complete
- <6>[ 5.751662] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
- <6>[ 5.760296] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
- <6>[ 5.768305] devtmpfs: mounted
- <6>[ 5.771759] Freeing unused kernel memory: 244K (c067d000 - c06ba000)
- <12>[ 6.301316] init: ureadahead main process (81) terminated with status 5
- <30>[ 7.824411] systemd-udevd[199]: starting version 204
- <4>[ 8.912739] ------------[ cut here ]------------
- <4>[ 8.912949] WARNING: CPU: 0 PID: 211 at net/wireless/reg.c:423 regulatory_init+0x90/0x134 [cfg80211]()
- <4>[ 8.912959] db.txt is empty, you should update it...
- <4>[ 8.912967] Modules linked in: cfg80211(+)
- <4>[ 8.912991] CPU: 0 PID: 211 Comm: systemd-udevd Not tainted 3.12.8+ #1
- <4>[ 8.913186] [<c00136fc>] (unwind_backtrace+0x0/0xdc) from [<c0010a54>] (show_stack+0x10/0x14)
- <4>[ 8.913219] [<c0010a54>] (show_stack+0x10/0x14) from [<c04841e8>] (dump_stack+0x70/0x8c)
- <4>[ 8.913250] [<c04841e8>] (dump_stack+0x70/0x8c) from [<c00384cc>] (warn_slowpath_common+0x60/0x84)
- <4>[ 8.913270] [<c00384cc>] (warn_slowpath_common+0x60/0x84) from [<c003851c>] (warn_slowpath_fmt+0x2c/0x3c)
- <4>[ 8.913365] [<c003851c>] (warn_slowpath_fmt+0x2c/0x3c) from [<bf034160>] (regulatory_init+0x90/0x134 [cfg80211])
- <4>[ 8.913485] [<bf034160>] (regulatory_init+0x90/0x134 [cfg80211]) from [<bf034054>] (cfg80211_init+0x54/0xd0 [cfg80211])
- <4>[ 8.913552] [<bf034054>] (cfg80211_init+0x54/0xd0 [cfg80211]) from [<c00088e8>] (do_one_initcall+0x94/0x130)
- <4>[ 8.913572] [<c00088e8>] (do_one_initcall+0x94/0x130) from [<c00881b0>] (load_module+0x15e4/0x1b90)
- <4>[ 8.913590] [<c00881b0>] (load_module+0x15e4/0x1b90) from [<c008882c>] (SyS_init_module+0xd0/0xe8)
- <4>[ 8.913606] [<c008882c>] (SyS_init_module+0xd0/0xe8) from [<c000d9e0>] (ret_fast_syscall+0x0/0x30)
- <4>[ 8.913616] ---[ end trace 8840333afd0594d8 ]---
- <6>[ 8.913720] cfg80211: Calling CRDA to update world regulatory domain
- <6>[ 9.869388] EXT4-fs (mmcblk0p2): re-mounted. Opts: errors=remount-ro
- <6>[ 10.001287] net eth0: initializing cpsw version 1.12 (0)
- <6>[ 10.003391] net eth0: phy found : id is : 0x7c0f1
- <3>[ 10.003409] libphy: PHY 4a101000.mdio:01 not found
- <3>[ 10.008526] net eth0: phy 4a101000.mdio:01 not found on slave 1
- <4>[ 10.813141] FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
- <6>[ 13.069674] libphy: 4a101000.mdio:00 - Link is Up - 100/Full
- <12>[ 13.162110] init: udev-fallback-graphics main process (364) terminated with status 1
- <12>[ 15.226449] init: plymouth main process (89) killed by ABRT signal
- <12>[ 15.260622] init: plymouth-splash main process (472) terminated with status 2
- <12>[ 16.684713] init: avahi-cups-reload main process (492) terminated with status 1
- <12>[ 19.901961] init: plymouth-stop pre-start process (695) terminated with status 1
- <3>[ 600.438808] INFO: task kworker/0:1:14 blocked for more than 300 seconds.
- <3>[ 600.445924] Tainted: G W 3.12.8+ #1
- <3>[ 600.451085] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
- <6>[ 600.459348] kworker/0:1 D c0487c7c 0 14 2 0x00000000
- <6>[ 600.459389] Workqueue: events request_firmware_work_func
- <4>[ 600.459434] [<c0487c7c>] (__schedule+0x478/0x6c0) from [<c0485190>] (schedule_timeout+0x18/0x1dc)
- <4>[ 600.459454] [<c0485190>] (schedule_timeout+0x18/0x1dc) from [<c0488370>] (wait_for_common+0x120/0x168)
- <4>[ 600.459475] [<c0488370>] (wait_for_common+0x120/0x168) from [<c0362474>] (mmc_wait_for_req+0xcc/0x154)
- <4>[ 600.459501] [<c0362474>] (mmc_wait_for_req+0xcc/0x154) from [<c036b3d8>] (mmc_io_rw_extended+0x210/0x288)
- <4>[ 600.459518] [<c036b3d8>] (mmc_io_rw_extended+0x210/0x288) from [<c036c5f8>] (sdio_io_rw_ext_helper+0x15c/0x19c)
- <4>[ 600.459534] [<c036c5f8>] (sdio_io_rw_ext_helper+0x15c/0x19c) from [<c036c79c>] (sdio_writesb+0x1c/0x24)
- <4>[ 600.459566] [<c036c79c>] (sdio_writesb+0x1c/0x24) from [<bf0707dc>] (mwifiex_write_data_sync+0x60/0x88 [mwifiex_sdio])
- <4>[ 600.459595] [<bf0707dc>] (mwifiex_write_data_sync+0x60/0x88 [mwifiex_sdio]) from [<bf07154c>] (mwifiex_prog_fw_w_helper+0x1fc/0x29c [mwifiex_sdio])
- <4>[ 600.459681] [<bf07154c>] (mwifiex_prog_fw_w_helper+0x1fc/0x29c [mwifiex_sdio]) from [<bf047428>] (mwifiex_dnld_fw+0x80/0xdc [mwifiex])
- <4>[ 600.459732] [<bf047428>] (mwifiex_dnld_fw+0x80/0xdc [mwifiex]) from [<bf045938>] (mwifiex_fw_dpc+0x70/0x3e4 [mwifiex])
- <4>[ 600.459767] [<bf045938>] (mwifiex_fw_dpc+0x70/0x3e4 [mwifiex]) from [<c02b43f0>] (request_firmware_work_func+0x34/0x54)
- <4>[ 600.459797] [<c02b43f0>] (request_firmware_work_func+0x34/0x54) from [<c004beb8>] (process_one_work+0x210/0x32c)
- <4>[ 600.459817] [<c004beb8>] (process_one_work+0x210/0x32c) from [<c004c490>] (worker_thread+0x224/0x358)
- <4>[ 600.459839] [<c004c490>] (worker_thread+0x224/0x358) from [<c00511ac>] (kthread+0xa0/0xac)
- <4>[ 600.459863] [<c00511ac>] (kthread+0xa0/0xac) from [<c000da78>] (ret_from_fork+0x14/0x3c)
- <3>[ 900.608905] INFO: task kworker/0:1:14 blocked for more than 300 seconds.
- <3>[ 900.616035] Tainted: G W 3.12.8+ #1
- <3>[ 900.621188] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
- <6>[ 900.629454] kworker/0:1 D c0487c7c 0 14 2 0x00000000
- <6>[ 900.629496] Workqueue: events request_firmware_work_func
- <4>[ 900.629540] [<c0487c7c>] (__schedule+0x478/0x6c0) from [<c0485190>] (schedule_timeout+0x18/0x1dc)
- <4>[ 900.629559] [<c0485190>] (schedule_timeout+0x18/0x1dc) from [<c0488370>] (wait_for_common+0x120/0x168)
- <4>[ 900.629580] [<c0488370>] (wait_for_common+0x120/0x168) from [<c0362474>] (mmc_wait_for_req+0xcc/0x154)
- <4>[ 900.629606] [<c0362474>] (mmc_wait_for_req+0xcc/0x154) from [<c036b3d8>] (mmc_io_rw_extended+0x210/0x288)
- <4>[ 900.629624] [<c036b3d8>] (mmc_io_rw_extended+0x210/0x288) from [<c036c5f8>] (sdio_io_rw_ext_helper+0x15c/0x19c)
- <4>[ 900.629640] [<c036c5f8>] (sdio_io_rw_ext_helper+0x15c/0x19c) from [<c036c79c>] (sdio_writesb+0x1c/0x24)
- <4>[ 900.629671] [<c036c79c>] (sdio_writesb+0x1c/0x24) from [<bf0707dc>] (mwifiex_write_data_sync+0x60/0x88 [mwifiex_sdio])
- <4>[ 900.629700] [<bf0707dc>] (mwifiex_write_data_sync+0x60/0x88 [mwifiex_sdio]) from [<bf07154c>] (mwifiex_prog_fw_w_helper+0x1fc/0x29c [mwifiex_sdio])
- <4>[ 900.629788] [<bf07154c>] (mwifiex_prog_fw_w_helper+0x1fc/0x29c [mwifiex_sdio]) from [<bf047428>] (mwifiex_dnld_fw+0x80/0xdc [mwifiex])
- <4>[ 900.629838] [<bf047428>] (mwifiex_dnld_fw+0x80/0xdc [mwifiex]) from [<bf045938>] (mwifiex_fw_dpc+0x70/0x3e4 [mwifiex])
- <4>[ 900.629871] [<bf045938>] (mwifiex_fw_dpc+0x70/0x3e4 [mwifiex]) from [<c02b43f0>] (request_firmware_work_func+0x34/0x54)
- <4>[ 900.629902] [<c02b43f0>] (request_firmware_work_func+0x34/0x54) from [<c004beb8>] (process_one_work+0x210/0x32c)
- <4>[ 900.629923] [<c004beb8>] (process_one_work+0x210/0x32c) from [<c004c490>] (worker_thread+0x224/0x358)
- <4>[ 900.629945] [<c004c490>] (worker_thread+0x224/0x358) from [<c00511ac>] (kthread+0xa0/0xac)
- <4>[ 900.629970] [<c00511ac>] (kthread+0xa0/0xac) from [<c000da78>] (ret_from_fork+0x14/0x3c)
- root@arm:~#
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement