API tools faq
paste
Advertisement
Guest User

Untitled

a guest
Jul 17th, 2012
201
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 18.86 KB | None | 0 0
raw download clone embed print report
  1. SD/MMC found on device 0
  2. reading uEnv.txt
  3.  
  4. 317 bytes read
  5. Loaded environment from uEnv.txt
  6. Importing environment from mmc ...
  7. reading uImage
  8.  
  9. 2624728 bytes read
  10. ## Booting kernel from Legacy Image at 80300000 ...
  11. Image Name: 3.2.21-psp17
  12. Image Type: ARM Linux Kernel Image (uncompressed)
  13. Data Size: 2624664 Bytes = 2.5 MiB
  14. Load Address: 80008000
  15. Entry Point: 80008000
  16. Verifying Checksum ... OK
  17. Loading Kernel Image ... OK
  18. OK
  19.  
  20. Starting kernel ...
  21.  
  22. Uncompressing Linux... done, booting the kernel.
  23. [ 0.000000] Initializing cgroup subsys cpuset
  24. [ 0.000000] Initializing cgroup subsys cpu
  25. [ 0.000000] Linux version 3.2.21-psp17 (voodoo@hades) (gcc version 4.6.4 20120508 (prerelease) (Linaro GCC 4.6-2012.05) ) #1 Tue Jul 17 16:50:26 CDT 2012
  26. [ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c53c7d
  27. [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
  28. [ 0.000000] Machine: am335xevm
  29. [ 0.000000] Memory policy: ECC disabled, Data cache writeback
  30. [ 0.000000] AM335X ES1.0 (sgx neon )
  31. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 65024
  32. [ 0.000000] Kernel command line: console=ttyO0,115200n8 root=/dev/mmcblk0p2 ro rootfstype=ext4 rootwait ip=none
  33. [ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
  34. [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
  35. [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
  36. [ 0.000000] allocated 1048576 bytes of page_cgroup
  37. [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
  38. [ 0.000000] Memory: 256MB = 256MB total
  39. [ 0.000000] Memory: 251320k/251320k available, 10824k reserved, 0K highmem
  40. [ 0.000000] Virtual kernel memory layout:
  41. [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  42. [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
  43. [ 0.000000] vmalloc : 0xd0800000 - 0xff000000 ( 744 MB)
  44. [ 0.000000] lowmem : 0xc0000000 - 0xd0000000 ( 256 MB)
  45. [ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB)
  46. [ 0.000000] .text : 0xc0008000 - 0xc068d000 (6676 kB)
  47. [ 0.000000] .init : 0xc068d000 - 0xc06cb000 ( 248 kB)
  48. [ 0.000000] .data : 0xc06cc000 - 0xc0714160 ( 289 kB)
  49. [ 0.000000] .bss : 0xc0714184 - 0xc0755ad8 ( 263 kB)
  50. [ 0.000000] NR_IRQS:410 nr_irqs:410 410
  51. [ 0.000000] IRQ: Found an INTC at 0xfa200000 (revision 5.0) with 128 interrupts
  52. [ 0.000000] Total of 128 interrupts on 1 active controller
  53. [ 0.000000] OMAP clockevent source: GPTIMER2 at 24000000 Hz
  54. [ 0.000000] OMAP clocksource: GPTIMER1 at 32768 Hz
  55. [ 0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 131071999ms
  56. [ 0.000000] Console: colour dummy device 80x30
  57. [ 0.000152] Calibrating delay loop... 718.02 BogoMIPS (lpj=3590144)
  58. [ 0.058929] pid_max: default: 32768 minimum: 301
  59. [ 0.059051] Security Framework initialized
  60. [ 0.059112] AppArmor: AppArmor initialized
  61. [ 0.059173] Mount-cache hash table entries: 512
  62. [ 0.059539] Initializing cgroup subsys cpuacct
  63. [ 0.059600] Initializing cgroup subsys memory
  64. [ 0.059631] Initializing cgroup subsys devices
  65. [ 0.059631] Initializing cgroup subsys freezer
  66. [ 0.059661] Initializing cgroup subsys blkio
  67. [ 0.059661] Initializing cgroup subsys perf_event
  68. [ 0.059753] CPU: Testing write buffer coherency: ok
  69. [ 0.060668] devtmpfs: initialized
  70. [ 0.080291] omap_hwmod: gfx: failed to hardreset
  71. [ 0.096588] omap_hwmod: pruss: failed to hardreset
  72. [ 0.097290] print_constraints: dummy:
  73. [ 0.097564] NET: Registered protocol family 16
  74. [ 0.098602] OMAP GPIO hardware version 0.1
  75. [ 0.099700] omap_mux_init: Add partition: #1: core, flags: 0
  76. [ 0.100891] omap_i2c.1: alias fck already exists
  77. [ 0.101257] hw-breakpoint: debug architecture 0x4 unsupported.
  78. [ 0.101440] omap2_mcspi.1: alias fck already exists
  79. [ 0.101562] omap2_mcspi.2: alias fck already exists
  80. [ 0.101623] omap_init_sham: platform not supported
  81. [ 0.101654] omap_init_aes: platform not supported
  82. [ 0.101715] edma.0: alias fck already exists
  83. [ 0.101745] edma.0: alias fck already exists
  84. [ 0.101745] edma.0: alias fck already exists
  85. [ 0.101837] cape: pcm register
  86. [ 0.109283] bio: create slab <bio-0> at 0
  87. [ 0.110595] SCSI subsystem initialized
  88. [ 0.111389] usbcore: registered new interface driver usbfs
  89. [ 0.111511] usbcore: registered new interface driver hub
  90. [ 0.111694] usbcore: registered new device driver usb
  91. [ 0.111999] registerd cppi-dma Intr @ IRQ 17
  92. [ 0.111999] Cppi41 Init Done Qmgr-base(d083a000) dma-base(d0838000)
  93. [ 0.112030] Cppi41 Init Done
  94. [ 0.112060] musb-ti81xx musb-ti81xx: musb0, board_mode=0x13, plat_mode=0x3
  95. [ 0.112182] musb-ti81xx musb-ti81xx: musb1, board_mode=0x13, plat_mode=0x1
  96. [ 0.112640] omap_i2c omap_i2c.1: bus 1 rev2.4.0 at 100 kHz
  97. [ 0.113342] tps65910 1-002d: could not be detected
  98. [ 0.113800] Advanced Linux Sound Architecture Driver Version 1.0.24.
  99. [ 0.114349] NetLabel: Initializing
  100. [ 0.114349] NetLabel: domain hash size = 128
  101. [ 0.114349] NetLabel: protocols = UNLABELED CIPSOv4
  102. [ 0.114410] NetLabel: unlabeled traffic allowed by default
  103. [ 0.114440] Switching to clocksource gp timer
  104. [ 0.114685] AppArmor: AppArmor Filesystem Enabled
  105. [ 0.124450] musb-hdrc: version 6.0, ?dma?, otg (peripheral+host)
  106. [ 0.124694] musb-hdrc musb-hdrc.0: dma type: dma-cppi41
  107. [ 0.124877] MUSB0 controller's USBSS revision = 4ea20800
  108. [ 0.125610] musb-hdrc musb-hdrc.0: USB OTG mode controller at d081c000 using DMA, IRQ 18
  109. [ 0.125885] musb-hdrc musb-hdrc.1: dma type: dma-cppi41
  110. [ 0.126037] MUSB1 controller's USBSS revision = 4ea20800
  111. [ 0.126434] musb-hdrc musb-hdrc.1: MUSB HDRC host driver
  112. [ 0.126525] musb-hdrc musb-hdrc.1: new USB bus registered, assigned bus number 1
  113. [ 0.126678] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  114. [ 0.126678] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  115. [ 0.126708] usb usb1: Product: MUSB HDRC host driver
  116. [ 0.126708] usb usb1: Manufacturer: Linux 3.2.21-psp17 musb-hcd
  117. [ 0.126708] usb usb1: SerialNumber: musb-hdrc.1
  118. [ 0.127349] hub 1-0:1.0: USB hub found
  119. [ 0.127380] hub 1-0:1.0: 1 port detected
  120. [ 0.127807] musb-hdrc musb-hdrc.1: USB Host mode controller at d081e800 using DMA, IRQ 19
  121. [ 0.128234] NET: Registered protocol family 2
  122. [ 0.128540] IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
  123. [ 0.129333] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
  124. [ 0.129486] TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
  125. [ 0.129577] TCP: Hash tables configured (established 8192 bind 8192)
  126. [ 0.129608] TCP reno registered
  127. [ 0.129608] UDP hash table entries: 256 (order: 0, 4096 bytes)
  128. [ 0.129638] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
  129. [ 0.129943] NET: Registered protocol family 1
  130. [ 0.130310] RPC: Registered named UNIX socket transport module.
  131. [ 0.130340] RPC: Registered udp transport module.
  132. [ 0.130340] RPC: Registered tcp transport module.
  133. [ 0.130340] RPC: Registered tcp NFSv4.1 backchannel transport module.
  134. [ 0.132141] audit: initializing netlink socket (disabled)
  135. [ 0.132202] type=2000 audit(0.110:1): initialized
  136. [ 0.288787] VFS: Disk quotas dquot_6.5.2
  137. [ 0.288909] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  138. [ 0.290405] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
  139. [ 0.290466] fuse init (API version 7.17)
  140. [ 0.291076] Btrfs loaded
  141. [ 0.291107] msgmni has been set to 490
  142. [ 0.292205] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
  143. [ 0.292297] io scheduler noop registered
  144. [ 0.292297] io scheduler deadline registered
  145. [ 0.292388] io scheduler cfq registered (default)
  146. [ 0.293395] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
  147. [ 0.294494] omap_uart.0: ttyO0 at MMIO 0x44e09000 (irq = 72) is a OMAP UART0
  148. [ 0.989990] console [ttyO0] enabled
  149. [ 0.994171] omap_uart.1: ttyO1 at MMIO 0x48022000 (irq = 73) is a OMAP UART1
  150. [ 1.001922] omap_uart.2: ttyO2 at MMIO 0x48024000 (irq = 74) is a OMAP UART2
  151. [ 1.009613] omap_uart.3: ttyO3 at MMIO 0x481a6000 (irq = 44) is a OMAP UART3
  152. [ 1.017303] omap_uart.4: ttyO4 at MMIO 0x481a8000 (irq = 45) is a OMAP UART4
  153. [ 1.024932] omap_uart.5: ttyO5 at MMIO 0x481aa000 (irq = 46) is a OMAP UART5
  154. [ 1.039367] brd: module loaded
  155. [ 1.046508] loop: module loaded
  156. [ 1.049865] at24 1-0051: 32768 byte 24c256 EEPROM, writable, 64 bytes/write
  157. [ 1.115051] No daughter card found
  158. [ 1.118652] at24 1-0050: 32768 byte 24c256 EEPROM, writable, 64 bytes/write
  159. [ 1.133819] Board config.name: A335BONE00A51012BB012391
  160. [ 1.139312] Board name: A335BONE
  161. [ 1.142669] Board version: 00A5
  162. [ 1.145935] The board is a AM335x Beaglebone.
  163. [ 1.151123] tps65217 1-0024: TPS65217 ID 0x7 version 1.0
  164. [ 1.158477] print_constraints: DCDC1: 900 <--> 1800 mV at 1800 mV
  165. [ 1.166748] print_constraints: DCDC2: 900 <--> 3300 mV at 1275 mV
  166. [ 1.174987] print_constraints: DCDC3: 900 <--> 1500 mV at 1100 mV
  167. [ 1.183197] print_constraints: LDO1: 1000 <--> 3300 mV at 1800 mV
  168. [ 1.191436] print_constraints: LDO2: 900 <--> 3300 mV at 3300 mV
  169. [ 1.199584] print_constraints: LDO3: 1800 <--> 3300 mV at 3300 mV
  170. [ 1.207794] print_constraints: LDO4: 1800 <--> 3300 mV at 3300 mV
  171. [ 1.214752] cpufreq: disabling OPPTURBO (720mhz)
  172. [ 1.219940] omap_i2c.3: alias fck already exists
  173. [ 1.225128] omap_i2c omap_i2c.3: bus 3 rev2.4.0 at 100 kHz
  174. [ 1.231567] omap_hsmmc.0: alias fck already exists
  175. [ 1.239624] at24 3-0054: 32768 byte 24c256 EEPROM, writable, 64 bytes/write
  176. [ 1.305084] BeagleBone cape EEPROM: could not read eeprom at address 0x54
  177. [ 1.312194] at24 3-0055: 32768 byte 24c256 EEPROM, writable, 64 bytes/write
  178. [ 1.375091] BeagleBone cape EEPROM: could not read eeprom at address 0x55
  179. [ 1.382202] at24 3-0056: 32768 byte 24c256 EEPROM, writable, 64 bytes/write
  180. [ 1.445098] BeagleBone cape EEPROM: could not read eeprom at address 0x56
  181. [ 1.452209] at24 3-0057: 32768 byte 24c256 EEPROM, writable, 64 bytes/write
  182. [ 1.515106] BeagleBone cape EEPROM: could not read eeprom at address 0x57
  183. [ 1.522155] BeagleBone cape: exporting ADC pins to sysfs
  184. [ 1.528015] Beaglebone: initializing onboard LEDs
  185. [ 1.532897] BeagleBone cape: exporting SPI pins as spidev
  186. [ 1.539062] BeagleBone cape: initializing w1-gpio
  187. [ 1.544097] w1-gpio connected to P8_6
  188. [ 1.548828] CAN device driver interface
  189. [ 1.552856] CAN bus driver for Bosch D_CAN controller 1.0
  190. [ 1.605133] davinci_mdio davinci_mdio.0: davinci mdio revision 1.6
  191. [ 1.611572] davinci_mdio davinci_mdio.0: detected phy mask fffffffe
  192. [ 1.619110] davinci_mdio.0: probed
  193. [ 1.622680] davinci_mdio davinci_mdio.0: phy[0]: device 0:00, driver SMSC LAN8710/LAN8720
  194. [ 1.631378] usbcore: registered new interface driver cdc_ether
  195. [ 1.637542] usbcore: registered new interface driver rndis_host
  196. [ 1.643768] cdc_ncm: 04-Aug-2011
  197. [ 1.647216] usbcore: registered new interface driver cdc_ncm
  198. [ 1.653167] Initializing USB Mass Storage driver...
  199. [ 1.658386] usbcore: registered new interface driver usb-storage
  200. [ 1.664642] USB Mass Storage support registered.
  201. [ 1.669586] usbcore: registered new interface driver libusual
  202. [ 1.675659] gadget: using random self ethernet address
  203. [ 1.681121] gadget: using random host ethernet address
  204. [ 1.687408] usb0: MAC 52:06:df:34:63:7f
  205. [ 1.691406] usb0: HOST MAC 76:35:0a:6a:f6:67
  206. [ 1.695922] gadget: Ethernet Gadget, version: Memorial Day 2008
  207. [ 1.702209] gadget: g_ether ready
  208. [ 1.705780] musb-hdrc musb-hdrc.0: MUSB HDRC host driver
  209. [ 1.711395] musb-hdrc musb-hdrc.0: new USB bus registered, assigned bus number 2
  210. [ 1.719238] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
  211. [ 1.726318] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  212. [ 1.733856] usb usb2: Product: MUSB HDRC host driver
  213. [ 1.739044] usb usb2: Manufacturer: Linux 3.2.21-psp17 musb-hcd
  214. [ 1.745239] usb usb2: SerialNumber: musb-hdrc.0
  215. [ 1.750549] hub 2-0:1.0: USB hub found
  216. [ 1.754486] hub 2-0:1.0: 1 port detected
  217. [ 1.759429] mousedev: PS/2 mouse device common for all mice
  218. [ 1.766204] omap_rtc omap_rtc: rtc core: registered omap_rtc as rtc0
  219. [ 1.772857] omap_rtc: already running
  220. [ 1.776763] i2c /dev entries driver
  221. [ 1.780792] Linux media interface: v0.10
  222. [ 1.785034] lirc_dev: IR Remote Control driver registered, major 249
  223. [ 1.791748] Driver for 1-wire Dallas network protocol.
  224. [ 1.798370] OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec
  225. [ 1.810119] cpuidle: using governor ladder
  226. [ 1.814605] cpuidle: using governor menu
  227. [ 1.822448] usbcore: registered new interface driver snd-usb-6fire
  228. [ 1.829559] ALSA device list:
  229. [ 1.832672] No soundcards found.
  230. [ 1.837432] TCP cubic registered
  231. [ 1.841003] NET: Registered protocol family 10
  232. [ 1.848693] NET: Registered protocol family 17
  233. [ 1.853546] can: controller area network core (rev 20090105 abi 8)
  234. [ 1.860198] NET: Registered protocol family 29
  235. [ 1.864837] can: raw protocol (rev 20090105)
  236. [ 1.869384] Registering the dns_resolver key type
  237. [ 1.874359] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
  238. [ 1.882385] ThumbEE CPU extension supported.
  239. [ 1.886962] mux: Failed to setup hwmod io irq -22
  240. [ 1.892608] Power Management for AM33XX family
  241. [ 1.902343] registered taskstats version 1
  242. [ 1.907043] Detected MACID=d4:94:a1:3b:50:ff
  243. [ 1.914276] omap_rtc omap_rtc: setting system clock to 2000-01-01 00:01:03 UTC (946684863)
  244. [ 1.923950] Waiting for root device /dev/mmcblk0p2...
  245. [ 1.986572] mmc0: host does not support reading read-only switch. assuming write-enable.
  246. [ 1.995147] mmc0: new SD card at address c5ec
  247. [ 2.000335] mmcblk0: mmc0:c5ec SU02G 1.84 GiB
  248. [ 2.007720] mmcblk0: p1 p2
  249. [ 2.054412] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
  250. [ 2.063018] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
  251. [ 2.072296] devtmpfs: mounted
  252. [ 2.075988] Freeing init memory: 248K
  253. [ 2.239990] gadget: high-speed config #1: CDC Ethernet (ECM)
  254.  
  255. INIT: version 2.88 booting
  256.  
  257. [info] Using makefile-style concurrent boot in runlevel S.
  258. [....] Starting the hotplug events dispatcher: udevd[ 3.294647] udevd[130]: starting version 175
  259. [?25l[?1c7[ ok 8[?25h[?0c.
  260. [....] Synthesizing the initial hotplug events...[?25l[?1c7[ ok 8[?25h[?0cdone.
  261. [....] Waiting for /dev to be fully populated...[?25l[?1c7[ ok 8[?25h[?0cdone.
  262. [....] Activating swap...[?25l[?1c7[ ok 8[?25h[?0cdone.
  263. [ 5.555511] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
  264. [....] Checking root file system...fsck from util-linux 2.20.1
  265. rootfs: clean, 19352/116640 files, 114004/466176 blocks
  266. [?25l[?1c7[ ok 8[?25h[?0cdone.
  267. [ 5.788330] EXT4-fs (mmcblk0p2): re-mounted. Opts: errors=remount-ro
  268. [....] Loading kernel modules...[?25l[?1c7[ ok 8[?25h[?0cdone.
  269. [....] Activating lvm and md swap...[?25l[?1c7[ ok 8[?25h[?0cdone.
  270. [....] Checking file systems...fsck from util-linux 2.20.1
  271. [?25l[?1c7[ ok 8[?25h[?0cdone.
  272. [....] Mounting local filesystems...[?25l[?1c7[ ok 8[?25h[?0cdone.
  273. [....] Activating swapfile swap...[?25l[?1c7[ ok 8[?25h[?0cdone.
  274. [....] Cleaning up temporary files...[?25l[?1c7[ ok 8[?25h[?0c.
  275. [....] Configuring network interfaces...[?25l[?1c7[ ok 8[?25h[?0cdone.
  276. [....] Cleaning up temporary files...[?25l[?1c7[ ok 8[?25h[?0c.
  277. [....] Setting kernel variables ...[?25l[?1c7[ ok 8[?25h[?0cdone.
  278.  
  279. INIT: Entering runlevel: 2
  280.  
  281. [info] Using makefile-style concurrent boot in runlevel 2.
  282. [....] Starting enhanced syslogd: rsyslogd[?25l[?1c7[ ok 8[?25h[?0c.
  283. [....] Starting web server: apache2apache2: Could not reliably determine the server's fully qualified domain name, using 127.0.1.1 for ServerName
  284. [?25l[?1c7[ ok 8[?25h[?0c.
  285. [....] Starting periodic command scheduler: cron[?25l[?1c7[ ok 8[?25h[?0c.
  286. [....] Starting system message bus: dbus[?25l[?1c7[ ok 8[?25h[?0c.
  287. [....] Loading cpufreq kernel modules...[?25l[?1c7[ ok 8[?25h[?0cdone (none).
  288. [....] CPUFreq Utilities: Setting ondemand CPUFreq governor...CPU0...[?25l[?1c7[ ok 8[?25h[?0cdone.
  289. [....] Starting OpenBSD Secure Shell server: sshd[?25l[?1c7[ ok 8[?25h[?0c.
  290.  
  291. Debian GNU/Linux wheezy/sid devel ttyO0
  292.  
  293. devel login: debian
  294.  
  295. Password:
  296. Last login: Fri Dec 31 18:00:24 CST 1999 on ttyO0
  297. Linux devel 3.2.21-psp17 #1 Tue Jul 17 16:50:26 CDT 2012 armv7l
  298.  
  299. The programs included with the Debian GNU/Linux system are free software;
  300. the exact distribution terms for each program are described in the
  301. individual files in /usr/share/doc/*/copyright.
  302.  
  303. Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent
  304. permitted by applicable law.
  305. debian@devel:~$ sudo ifconfig -a
  306. [sudo] password for debian:
  307. eth0 Link encap:Ethernet HWaddr d4:94:a1:3b:50:ff
  308. BROADCAST MULTICAST MTU:1500 Metric:1
  309. RX packets:0 errors:0 dropped:0 overruns:0 frame:0
  310. TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
  311. collisions:0 txqueuelen:1000
  312. RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
  313.  
  314. lo Link encap:Local Loopback
  315. inet addr:127.0.0.1 Mask:255.0.0.0
  316. inet6 addr: ::1/128 Scope:Host
  317. UP LOOPBACK RUNNING MTU:16436 Metric:1
  318. RX packets:0 errors:0 dropped:0 overruns:0 frame:0
  319. TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
  320. collisions:0 txqueuelen:0
  321. RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
  322.  
  323. usb0 Link encap:Ethernet HWaddr 52:06:df:34:63:7f
  324. BROADCAST MULTICAST MTU:1500 Metric:1
  325. RX packets:0 errors:0 dropped:0 overruns:0 frame:0
  326. TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
  327. collisions:0 txqueuelen:1000
  328. RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
  329.  
  330. debian@devel:~$ lsmod
  331. Module Size Used by
  332. snd_soc_tlv320aic3x 32666 0
  333. spidev 4652 0
  334. debian@devel:~$ dmesg | grep davinci
  335. [ 1.605133] davinci_mdio davinci_mdio.0: davinci mdio revision 1.6
  336. [ 1.611572] davinci_mdio davinci_mdio.0: detected phy mask fffffffe
  337. [ 1.619110] davinci_mdio.0: probed
  338. [ 1.622680] davinci_mdio davinci_mdio.0: phy[0]: device 0:00, driver SMSC LAN8710/LAN8720
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!