Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- sdc
- smartctl 5.42 2011-10-20 r3458 [x86_64-linux-3.4.47-std370-amd64] (local build)
- Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net
- === START OF INFORMATION SECTION ===
- Model Family: Western Digital Caviar Green (Adv. Format)
- Device Model: WDC WD20EARS-00S8B1
- Serial Number: WD-WCAVY2741292
- LU WWN Device Id: 5 0014ee 2041f082e
- Firmware Version: 80.00A80
- User Capacity: 2,000,398,934,016 bytes [2.00 TB]
- Sector Size: 512 bytes logical/physical
- Device is: In smartctl database [for details use: -P show]
- ATA Version is: 8
- ATA Standard is: Exact ATA specification draft version not indicated
- Local Time is: Wed Jun 19 14:00:17 2013 UTC
- SMART support is: Available - device has SMART capability.
- SMART support is: Enabled
- === START OF READ SMART DATA SECTION ===
- SMART overall-health self-assessment test result: PASSED
- General SMART Values:
- Offline data collection status: (0x84) Offline data collection activity
- was suspended by an interrupting command from host.
- Auto Offline Data Collection: Enabled.
- Self-test execution status: ( 0) The previous self-test routine completed
- without error or no self-test has ever
- been run.
- Total time to complete Offline
- data collection: (39960) seconds.
- Offline data collection
- capabilities: (0x7b) SMART execute Offline immediate.
- Auto Offline data collection on/off support.
- Suspend Offline collection upon new
- command.
- Offline surface scan supported.
- Self-test supported.
- Conveyance Self-test supported.
- Selective Self-test supported.
- SMART capabilities: (0x0003) Saves SMART data before entering
- power-saving mode.
- Supports SMART auto save timer.
- Error logging capability: (0x01) Error logging supported.
- General Purpose Logging supported.
- Short self-test routine
- recommended polling time: ( 2) minutes.
- Extended self-test routine
- recommended polling time: ( 255) minutes.
- Conveyance self-test routine
- recommended polling time: ( 5) minutes.
- SCT capabilities: (0x3031) SCT Status supported.
- SCT Feature Control supported.
- SCT Data Table supported.
- SMART Attributes Data Structure revision number: 16
- Vendor Specific SMART Attributes with Thresholds:
- ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
- 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0
- 3 Spin_Up_Time POS--K 252 171 021 - 4358
- 4 Start_Stop_Count -O--CK 100 100 000 - 100
- 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0
- 7 Seek_Error_Rate -OSR-K 200 200 000 - 0
- 9 Power_On_Hours -O--CK 070 070 000 - 22455
- 10 Spin_Retry_Count -O--CK 100 253 000 - 0
- 11 Calibration_Retry_Count -O--CK 100 253 000 - 0
- 12 Power_Cycle_Count -O--CK 100 100 000 - 98
- 192 Power-Off_Retract_Count -O--CK 200 200 000 - 97
- 193 Load_Cycle_Count -O--CK 001 001 000 - 1439782
- 194 Temperature_Celsius -O---K 110 088 000 - 42
- 196 Reallocated_Event_Count -O--CK 200 200 000 - 0
- 197 Current_Pending_Sector -O--CK 200 200 000 - 42
- 198 Offline_Uncorrectable ----CK 200 200 000 - 42
- 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0
- 200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 35
- ||||||_ K auto-keep
- |||||__ C event count
- ||||___ R error rate
- |||____ S speed/performance
- ||_____ O updated online
- |______ P prefailure warning
- General Purpose Log Directory Version 1
- SMART Log Directory Version 1 [multi-sector log support]
- GP/S Log at address 0x00 has 1 sectors [Log Directory]
- SMART Log at address 0x01 has 1 sectors [Summary SMART error log]
- SMART Log at address 0x02 has 5 sectors [Comprehensive SMART error log]
- GP Log at address 0x03 has 6 sectors [Ext. Comprehensive SMART error log]
- SMART Log at address 0x06 has 1 sectors [SMART self-test log]
- GP Log at address 0x07 has 1 sectors [Extended self-test log]
- SMART Log at address 0x09 has 1 sectors [Selective self-test log]
- GP Log at address 0x10 has 1 sectors [NCQ Command Error log]
- GP Log at address 0x11 has 1 sectors [SATA Phy Event Counters]
- GP/S Log at address 0x80 has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x81 has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x82 has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x83 has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x84 has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x85 has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x86 has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x87 has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x88 has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x89 has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x8a has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x8b has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x8c has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x8d has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x8e has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x8f has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x90 has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x91 has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x92 has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x93 has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x94 has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x95 has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x96 has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x97 has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x98 has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x99 has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x9a has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x9b has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x9c has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x9d has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x9e has 16 sectors [Host vendor specific log]
- GP/S Log at address 0x9f has 16 sectors [Host vendor specific log]
- GP/S Log at address 0xa0 has 16 sectors [Device vendor specific log]
- GP/S Log at address 0xa1 has 16 sectors [Device vendor specific log]
- GP/S Log at address 0xa2 has 16 sectors [Device vendor specific log]
- GP/S Log at address 0xa3 has 16 sectors [Device vendor specific log]
- GP/S Log at address 0xa4 has 16 sectors [Device vendor specific log]
- GP/S Log at address 0xa5 has 16 sectors [Device vendor specific log]
- GP/S Log at address 0xa6 has 16 sectors [Device vendor specific log]
- GP/S Log at address 0xa7 has 16 sectors [Device vendor specific log]
- GP/S Log at address 0xa8 has 1 sectors [Device vendor specific log]
- GP/S Log at address 0xa9 has 1 sectors [Device vendor specific log]
- GP/S Log at address 0xaa has 1 sectors [Device vendor specific log]
- GP/S Log at address 0xab has 1 sectors [Device vendor specific log]
- GP/S Log at address 0xac has 1 sectors [Device vendor specific log]
- GP/S Log at address 0xad has 1 sectors [Device vendor specific log]
- GP/S Log at address 0xae has 1 sectors [Device vendor specific log]
- GP/S Log at address 0xaf has 1 sectors [Device vendor specific log]
- GP/S Log at address 0xb0 has 1 sectors [Device vendor specific log]
- GP/S Log at address 0xb1 has 1 sectors [Device vendor specific log]
- GP/S Log at address 0xb2 has 1 sectors [Device vendor specific log]
- GP/S Log at address 0xb3 has 1 sectors [Device vendor specific log]
- GP/S Log at address 0xb4 has 1 sectors [Device vendor specific log]
- GP/S Log at address 0xb5 has 1 sectors [Device vendor specific log]
- GP/S Log at address 0xb6 has 1 sectors [Device vendor specific log]
- GP/S Log at address 0xb7 has 1 sectors [Device vendor specific log]
- GP/S Log at address 0xc0 has 1 sectors [Device vendor specific log]
- GP Log at address 0xc1 has 93 sectors [Device vendor specific log]
- GP/S Log at address 0xe0 has 1 sectors [SCT Command/Status]
- GP/S Log at address 0xe1 has 1 sectors [SCT Data Transfer]
- SMART Extended Comprehensive Error Log Version: 1 (6 sectors)
- No Errors Logged
- SMART Extended Self-test Log Version: 1 (1 sectors)
- No self-tests have been logged. [To run self-tests, use: smartctl -t]
- SMART Selective self-test log data structure revision number 1
- SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
- 1 0 0 Not_testing
- 2 0 0 Not_testing
- 3 0 0 Not_testing
- 4 0 0 Not_testing
- 5 0 0 Not_testing
- Selective self-test flags (0x0):
- After scanning selected spans, do NOT read-scan remainder of disk.
- If Selective self-test is pending on power-up, resume after 0 minute delay.
- SCT Status Version: 2
- SCT Version (vendor specific): 258 (0x0102)
- SCT Support Level: 1
- Device State: Active (0)
- Current Temperature: 42 Celsius
- Power Cycle Min/Max Temperature: 40/42 Celsius
- Lifetime Min/Max Temperature: 42/64 Celsius
- Under/Over Temperature Limit Count: 0/0
- SCT Temperature History Version: 2
- Temperature Sampling Period: 1 minute
- Temperature Logging Interval: 1 minute
- Min/Max recommended Temperature: 0/60 Celsius
- Min/Max Temperature Limit: -41/85 Celsius
- Temperature History Size (Index): 478 (45)
- Index Estimated Time Temperature Celsius
- 46 2013-06-19 06:03 40 *********************
- 47 2013-06-19 06:04 ? -
- 48 2013-06-19 06:05 41 **********************
- 49 2013-06-19 06:06 41 **********************
- 50 2013-06-19 06:07 41 **********************
- 51 2013-06-19 06:08 40 *********************
- ... ..( 2 skipped). .. *********************
- 54 2013-06-19 06:11 40 *********************
- 55 2013-06-19 06:12 41 **********************
- ... ..( 12 skipped). .. **********************
- 68 2013-06-19 06:25 41 **********************
- 69 2013-06-19 06:26 42 ***********************
- ... ..( 19 skipped). .. ***********************
- 89 2013-06-19 06:46 42 ***********************
- 90 2013-06-19 06:47 30 ***********
- ... ..(223 skipped). .. ***********
- 314 2013-06-19 10:31 30 ***********
- 315 2013-06-19 10:32 31 ************
- ... ..( 2 skipped). .. ************
- 318 2013-06-19 10:35 31 ************
- 319 2013-06-19 10:36 32 *************
- ... ..( 2 skipped). .. *************
- 322 2013-06-19 10:39 32 *************
- 323 2013-06-19 10:40 33 **************
- ... ..(164 skipped). .. **************
- 10 2013-06-19 13:25 33 **************
- 11 2013-06-19 13:26 34 ***************
- ... ..( 13 skipped). .. ***************
- 25 2013-06-19 13:40 34 ***************
- 26 2013-06-19 13:41 33 **************
- ... ..( 2 skipped). .. **************
- 29 2013-06-19 13:44 33 **************
- 30 2013-06-19 13:45 34 ***************
- 31 2013-06-19 13:46 34 ***************
- 32 2013-06-19 13:47 35 ****************
- 33 2013-06-19 13:48 35 ****************
- 34 2013-06-19 13:49 36 *****************
- 35 2013-06-19 13:50 36 *****************
- 36 2013-06-19 13:51 37 ******************
- ... ..( 2 skipped). .. ******************
- 39 2013-06-19 13:54 37 ******************
- 40 2013-06-19 13:55 38 *******************
- 41 2013-06-19 13:56 38 *******************
- 42 2013-06-19 13:57 39 ********************
- 43 2013-06-19 13:58 39 ********************
- 44 2013-06-19 13:59 40 *********************
- 45 2013-06-19 14:00 40 *********************
- Warning: device does not support SCT Error Recovery Control command
- SATA Phy Event Counters (GP Log 0x11)
- ID Size Value Description
- 0x0001 2 0 Command failed due to ICRC error
- 0x0002 2 0 R_ERR response for data FIS
- 0x0003 2 0 R_ERR response for device-to-host data FIS
- 0x0004 2 0 R_ERR response for host-to-device data FIS
- 0x0005 2 0 R_ERR response for non-data FIS
- 0x0006 2 0 R_ERR response for device-to-host non-data FIS
- 0x0007 2 0 R_ERR response for host-to-device non-data FIS
- 0x000a 2 6 Device-to-host register FISes sent due to a COMRESET
- 0x000b 2 0 CRC errors within host-to-device FIS
- 0x8000 4 2585 Vendor specific
Advertisement
Add Comment
Please, Sign In to add comment