_ids 1
<6>[    4.860839] qtouch_process_info_block: Object 28 @ 0x01ad (6) insts 1 rep_
ids 1
<6>[    4.861541] qtouch_process_info_block: Object 37 @ 0x0064 (130) insts 1 re
p_ids 0
<4>[    4.861724] qtouch_process_info_block: Unknown object type (37) encountere
d
<4>[    4.862365] qtouch_process_info_block: Checksum mismatch (0x7364 != 0xf04b
)
<6>[    4.862487] qtouch_process_info_block: qtouch-obp-ts found. family 0x80, v
ariant 0x5, ver 0x16, build 0xab, matrix 19x11, 15 objects.
<6>[    4.862701] qtouch_ts_probe: FW version is 0x16 Build 0xAB
<6>[    4.863464] input: qtouch-touchscreen as /devices/virtual/input/input3
<6>[    4.864471] GPIO Matrix Keypad Driver: Start keypad matrix for sholes-keyp
ad in interrupt mode
<6>[    4.864715] GPIO Input Driver: Start gpio inputs for sholes-keypad in inte
rrupt mode
<6>[    4.865264] do_cmd_proc_msg:EEPROM checksum doesn't match 0x20a9
<6>[    4.865386] qtouch_hw_init: Doing hw init
<6>[    4.865844] input: sholes-keypad as /devices/virtual/input/input4
<6>[    4.869415] input: proximity as /devices/virtual/input/input5
<6>[    4.870269] sfh7743 sfh7743: sfh7743 probed
<6>[    4.870971] using input dev qtouch-touchscreen for key reset
<6>[    4.871185] using input dev sholes-keypad for key reset
<6>[    4.872863] using rtc device, cpcap_rtc, for alarms
<6>[    4.873138] cpcap_rtc cpcap_rtc: rtc core: registered cpcap_rtc as rtc0
<6>[    4.873901] qtouch_force_calibration: Forcing calibration
<6>[    4.874420] i2c /dev entries driver
<6>[    4.875488] Linux video capture interface: v2.00
<6>[    4.875732] mt9p012 driver loading
<6>[    4.877075] hp3a hp3a-omap: Registered hp3a driver.
<6>[    4.877410] omap-iommu omap-iommu.0: isp: version 1.1
<6>[    4.877746] isp_tmp_buf_alloc: allocating 16777216 bytes
<6>[    4.991760] omap3isp omap3isp: Revision 15.0 found
<7>[    4.992767] tda19989_probe
<7>[    4.993011] tda19989 I2C probe
<6>[    4.995910] Driver for 1-wire Dallas network protocol.
<6>[    4.996612] omap_hdq omap_hdq.0: OMAP HDQ Hardware Rev 0.5. Driver in Inte
rrupt mode
<6>[    5.185180] usb 1-3: new full speed USB device using ohci and address 2
<3>[    5.185485] omap_hdq omap_hdq.0: break wait elapsed
<6>[    5.186187] w1_master_driver w1 bus master: Family 89 for 89.000000000000.
5b is not registered.
<6>[    5.188323] OMAP Watchdog Timer Rev 0x31: initial timeout 60 sec
<6>[    5.189056] Watchdog auto-pet enabled at 45 sec intervals
<6>[    5.189636] device-mapper: uevent: version 1.0.3
<6>[    5.190155] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: d
m-devel@redhat.com
<6>[    5.190399] Bluetooth: HCI UART driver ver 2.2
<6>[    5.190490] Bluetooth: HCI H4 protocol initialized
<6>[    5.190673] Bluetooth: HCILL protocol initialized
<6>[    5.190917] cpuidle: using governor ladder
<6>[    5.191101] cpuidle: using governor menu
<6>[    5.194061] cpcap_bd7885_probe:CPCAP Probe enter
<6>[    5.194183] cpcap_bd7885_probe:CPCAP probe exit
<6>[    5.194885] BU9847 i2c driver : init is completed.
<6>[    5.195251] Registered led device: af-led
<6>[    5.195831] Registered led device: button-backlight
<6>[    5.196319] Registered led device: red
<6>[    5.196594] Registered led device: green
<6>[    5.196929] Registered led device: blue
<6>[    5.197509] Registered led device: keyboard-backlight
<6>[    5.198425] input: lm3530_led as /devices/virtual/input/input6
<6>[    5.200378] Registered led device: lcd-backlight
<6>[    5.201385] cpcap_lm3559_probe:CPCAP Probe enter
<6>[    5.208465] Registered led device: torch-flash
<6>[    5.209075] Registered led device: spotlight
<6>[    5.209289] LM3559 torch initialized
<6>[    5.209533] cpcap_lm3559_probe:CPCAP torch probe exit
<6>[    5.210968] usbcore: registered new interface driver usbhid
<6>[    5.211181] usbhid: v2.6:USB HID core driver
<6>[    5.211944] logger: created 64K log 'log_main'
<6>[    5.212341] logger: created 256K log 'log_events'
<6>[    5.212646] logger: created 64K log 'log_radio'
<6>[    5.212921] logger: created 64K log 'log_system'
<4>[    5.215423] Netfilter messages via NETLINK v0.30.
<4>[    5.215637] nf_conntrack version 0.5.0 (7633 buckets, 30532 max)
<4>[    5.216064] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Plea
se use
<4>[    5.216156] nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack modu
le option or
<4>[    5.216461] sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
<4>[    5.216766] ctnetlink v0.93: registering with nfnetlink.
<6>[    5.216979] xt_time: kernel timezone is -0000
<6>[    5.217315] ip_tables: (C) 2000-2006 Netfilter Core Team
<6>[    5.217620] arp_tables: (C) 2002 David S. Miller
<6>[    5.217773] TCP cubic registered
<6>[    5.217987] Initializing XFRM netlink socket
<6>[    5.218322] NET: Registered protocol family 10
<6>[    5.218902] lo: Disabled Privacy Extensions
<6>[    5.219390] Mobile IPv6
<6>[    5.219512] IPv6 over IPv4 tunneling driver
<6>[    5.220367] sit0: Disabled Privacy Extensions
<6>[    5.221099] ip6tnl0: Disabled Privacy Extensions
<6>[    5.221313] NET: Registered protocol family 17
<6>[    5.221527] NET: Registered protocol family 15
<6>[    5.221649] Bluetooth: L2CAP ver 2.14
<6>[    5.221771] Bluetooth: L2CAP socket layer initialized
<6>[    5.221954] Bluetooth: SCO (Voice Link) ver 0.6
<6>[    5.222076] Bluetooth: SCO socket layer initialized
<6>[    5.222442] Bluetooth: RFCOMM TTY layer initialized
<6>[    5.222564] Bluetooth: RFCOMM socket layer initialized
<6>[    5.222656] Bluetooth: RFCOMM ver 1.11
<6>[    5.222839] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
<6>[    5.222961] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
<6>[    5.223876] OMAP DSS rev 2.0
<6>[    5.224060] OMAP DISPC rev 3.0
<6>[    5.224670] OMAP DSI rev 1.0
<6>[    5.380706] do_cmd_proc_msg: Reset done.
<6>[    5.380920] do_cmd_proc_msg: Self-calibration started.
<6>[    5.381439] qtouch_hw_init: Doing hw init
<6>[    5.387390] qtouch_force_calibration: Forcing calibration
<7>[    5.388305] DT: width= 480 height= 854
<7>[    5.388427] DT: hfp=0 hsw=2 hbp=2 vfp=0 vsw=1 vbp=1
<7>[    5.388610] DT: clk_lane=1 clk_pos=0  data1_lane=2 data1_pos=0
<7>[    5.388732] DT: data2_lane= 3 data2_pos= 0 xfer_mode= 0
<7>[    5.388916] DT: gpio_reset= 126 panel_id= 0x1a0000
<7>[    5.389038] DT: regn=13 regm=170 regm3=5 regm4=5 lp_clk_div=10 lck_div=1 p
ck_div=4
<6>[    5.423095] usb 1-3: configuration #1 chosen from 1 choice
<6>[    5.435668] cdma-modem 1-3:1.0: QSC 6085 Modem Driver converter detected
<6>[    5.436676] usb 1-3: QSC 6085 Modem Driver converter now attached to ttyUS
B0
<6>[    5.438476] cdma-modem 1-3:1.1: QSC 6085 Modem Driver converter detected
<6>[    5.439331] usb 1-3: QSC 6085 Modem Driver converter now attached to ttyUS
B1
<6>[    5.440765] cdma-modem 1-3:1.2: QSC 6085 Modem Driver converter detected
<6>[    5.441589] usb 1-3: QSC 6085 Modem Driver converter now attached to ttyUS
B2
<6>[    5.442749] cdma-modem 1-3:1.3: QSC 6085 Modem Driver converter detected
<6>[    5.443756] usb 1-3: QSC 6085 Modem Driver converter now attached to ttyUS
B3
<4>[    5.615478] mmc0: host does not support reading read-only switch. assuming
 write-enable.
<6>[    5.615692] mmc0: new high speed SDHC card at address 0001
<6>[    5.616363] mmcblk0: mmc0:0001 00000 14.7 GiB
<6>[    5.616699]  mmcblk0: p1
<6>[    5.763916] mmc1: new high speed MMC card at address 0001
<6>[    5.764526] mmcblk1: mmc1:0001 MMC08G 7.45 GiB
<6>[    5.764831]  mmcblk1: p1 p2 p3 p4 < p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15
 p16 p17 p18 p19 p20 p21 p22 p23 p24 >
<6>[    5.775787] mmc_blk_probe: adding mmcblk1p20:kpanic
<3>[    5.779724] apanic: Bound to mmc block device 'mmcblk1p20(179:52)'
<6>[    5.779907] apanic: No panic data available
<4>[    5.814056] plane 1, # of overlays: 3
<4>[    5.815307] plane 2, # of overlays: 3
<2>[    5.816558] omap_is_SEC: fab_id = 1, it is UMC OMAP3630 Silicon
<3>[    5.816680] Power Management for TI OMAP3.
<6>[    5.822113]
<6>[    5.822143] MAPPHONE PMIC SR init...
<6>[    5.822418] SR1 : Fused Nvalues for 4 OPP
<6>[    5.822601] VDD1 - OPP4 -  1G Nvalue = 0xAA9188
<6>[    5.822692] VDD1 - OPP3 - 800 Nvalue = 0xAAB5A6
<6>[    5.822814] VDD1 - OPP2 - 600 Nvalue = 0xAAF8E4
<6>[    5.822998] VDD1 - OPP1 - 300 Nvalue = 0x99A89B
<6>[    5.823303] SR2 : Fused Nvalues for 2 OPP
<6>[    5.823394] VDD2 - OPP2 - 200 Nvalue = 0x9A87F7
<6>[    5.823516] VDD2 - OPP1 - 100 Nvalue = 0x99E2D2
<6>[    5.823944] SmartReflex driver initialized
<7>[    5.828552] Disabling unused clock "sr2_fck"
<7>[    5.828674] Disabling unused clock "sr1_fck"
<7>[    5.828796] Disabling unused clock "gpt2_ick"
<7>[    5.829010] Disabling unused clock "gpt3_ick"
<7>[    5.829132] Disabling unused clock "gpt4_ick"
<7>[    5.829315] Disabling unused clock "gpt5_ick"
<7>[    5.829437] Disabling unused clock "gpt6_ick"
<7>[    5.829528] Disabling unused clock "gpt7_ick"
<7>[    5.829742] Disabling unused clock "gpt8_ick"
<7>[    5.829833] Disabling unused clock "gpt9_ick"
<7>[    5.829956] Disabling unused clock "gpio2_dbck"
<7>[    5.830139] Disabling unused clock "gpio3_dbck"
<7>[    5.830261] Disabling unused clock "gpio4_dbck"
<7>[    5.830444] Disabling unused clock "gpio5_dbck"
<7>[    5.830566] Disabling unused clock "gpio6_dbck"
<7>[    5.830688] Disabling unused clock "gpt9_fck"
<7>[    5.830871] Disabling unused clock "gpt8_fck"
<7>[    5.830993] Disabling unused clock "gpt7_fck"
<7>[    5.831176] Disabling unused clock "gpt6_fck"
<7>[    5.831268] Disabling unused clock "gpt5_fck"
<7>[    5.831390] Disabling unused clock "gpt4_fck"
<7>[    5.831604] Disabling unused clock "gpt3_fck"
<7>[    5.831695] Disabling unused clock "gpt2_fck"
<7>[    5.831909] Disabling unused clock "gpt12_ick"
<7>[    5.832000] Disabling unused clock "wdt1_ick"
<7>[    5.832122] Disabling unused clock "usim_ick"
<7>[    5.832305] Disabling unused clock "gpio1_dbck"
<7>[    5.832427] Disabling unused clock "usim_fck"
<7>[    5.832550] Disabling unused clock "rng_ick"
<7>[    5.832733] Disabling unused clock "ssi_ick"
<7>[    5.832855] Disabling unused clock "mcbsp_ick"
<7>[    5.833038] Disabling unused clock "mcbsp_ick"
<7>[    5.833160] Disabling unused clock "gpt10_ick"
<7>[    5.833251] Disabling unused clock "mspro_ick"
<7>[    5.833465] Disabling unused clock "des2_ick"
<7>[    5.833648] Disabling unused clock "sha12_ick"
<7>[    5.833831] Disabling unused clock "aes2_ick"
<7>[    5.833953] Disabling unused clock "icr_ick"
<7>[    5.834045] Disabling unused clock "ssi_ssr_fck"
<7>[    5.834259] Disabling unused clock "mcbsp_fck"
<7>[    5.834381] Disabling unused clock "mcbsp_fck"
<7>[    5.834472] Disabling unused clock "mspro_fck"
<7>[    5.834686] Disabling unused clock "cpefuse_fck"
<7>[    5.834777] Disabling unused clock "gpt10_fck"
<7>[    5.834991] Disabling unused clock "dpll4_m6x2_ck"
<7>[    5.835113] Disabling unused clock "dpll3_m3x2_ck"
<7>[    5.835296] Disabling unused clock "sys_clkout1"
<3>[    5.835937] sr_recalibrate: 2:2 autocomp was disabled
<6>[    5.836334] VFP support v0.3: implementor 41 architecture 3 part 30 varian
t c rev 3
<3>[    5.838348] regulator_check_voltage: operation not allowed for vusb
<6>[    5.839050] cpcap_usb_det cpcap_usb_det: CPCAP USB detection device probed

<6>[    5.843536] cpcap_rtc cpcap_rtc: setting system clock to 1970-01-01 00:01:
29 UTC (89)
<7>[    5.843963] ov8810_sensor_power_set: power on
<6>[    5.847351] mapphone_camera_reg_power - enable vcam
<6>[    5.888458] qtouch_force_reset: Forcing HW reset
<6>[    5.934234] ov8810 Chip version 0x03 detected
<7>[    5.934387] ov8810_sensor_power_set: power off
<6>[    5.943298] video4linux video0: video0 is now omap3/ov8810//
<6>[    5.944213] HP_GEN_LENS 3-0004: lens probe called....
<6>[    5.944396] video4linux video0: video0 is now omap3/ov8810/hplens/
<3>[    5.944488] Registered hplens as V4L2 device.
<6>[    5.944946] Freeing init memory: 176K
<4>[    5.945068] Warning: unable to open an initial console.
<6>[    5.959289] cpcap spi1.0: notify_accy: accy=0
<6>[    5.990631] do_cmd_proc_msg:EEPROM checksum doesn't match 0x20a9
<6>[    5.990753] qtouch_hw_init: Doing hw init
<6>[    5.997406] qtouch_force_calibration: Forcing calibration
<6>[    6.049591] keychord: using input dev qtouch-touchscreen for fevent
<6>[    6.049774] keychord: using input dev sholes-keypad for fevent
<6>[    6.055053] kjournald starting.  Commit interval 5 seconds
<6>[    6.067474] EXT3 FS on mmcblk1p21, internal journal
<6>[    6.067657] EXT3-fs: mounted filesystem with ordered data mode.
<6>[    6.202850] kjournald starting.  Commit interval 5 seconds
<6>[    6.207672] EXT3 FS on mmcblk1p24, internal journal
<6>[    6.207916] EXT3-fs: recovery complete.
<6>[    6.212493] EXT3-fs: mounted filesystem with ordered data mode.
<6>[    6.232757] kjournald starting.  Commit interval 5 seconds
<6>[    6.236206] EXT3 FS on mmcblk1p23, internal journal
<6>[    6.236389] EXT3-fs: recovery complete.
<6>[    6.239898] EXT3-fs: mounted filesystem with ordered data mode.
<6>[    6.505981] do_cmd_proc_msg: Reset done.
<6>[    6.506164] do_cmd_proc_msg: Self-calibration started.
<7>[   12.439483] device_mode_change_write cmd=msc_adb
<7>[   12.439514]
<3>[   12.647949] init: /init.mapphone_cdma.rc: 179: group option accepts at mos
t 12 supp. groups
<6>[   12.767547] kjournald starting.  Commit interval 5 seconds
<6>[   12.770782] EXT3 FS on mmcblk1p21, internal journal
<6>[   12.770965] EXT3-fs: mounted filesystem with ordered data mode.
<6>[   12.824371] kjournald starting.  Commit interval 5 seconds
<6>[   12.828948] EXT3 FS on mmcblk1p22, internal journal
<6>[   12.829193] EXT3-fs: recovery complete.
<6>[   12.841918] EXT3-fs: mounted filesystem with ordered data mode.
<6>[   12.846557] kjournald starting.  Commit interval 5 seconds
<6>[   12.851837] EXT3 FS on mmcblk1p24, internal journal
<6>[   12.852081] EXT3-fs: mounted filesystem with ordered data mode.
<6>[   12.876403] CPUFREQ: Per core ondemand sysfs interface is deprecated - up_
threshold
<6>[   12.876617] CPUFREQ: Per core ondemand sysfs interface is deprecated - sam
pling_rate
<6>[   12.876770] sr_vdd1_autocomp: Already set to 1
<6>[   12.893890] kjournald starting.  Commit interval 5 seconds
<6>[   12.897186] EXT3 FS on mmcblk1p7, internal journal
<6>[   12.897430] EXT3-fs: recovery complete.
<6>[   12.900939] EXT3-fs: mounted filesystem with ordered data mode.
<6>[   12.904571] kjournald starting.  Commit interval 5 seconds
<6>[   12.907836] EXT3 FS on mmcblk1p23, internal journal
<6>[   12.908111] EXT3-fs: mounted filesystem with ordered data mode.
<6>[   12.923400] Inserting sec module
<3>[   12.941223] init: untracked pid 1090 exited
<6>[   12.985778] android_usb gadget: high speed config #1: android
<3>[   13.137969] init: exec: pid 1518 exited with return code 250: Unknown erro
r: 64117
<3>[   13.150970] init: cannot find '/system/bin/telnetd', disabling 'telnet'
<3>[   13.192138] init: cannot find '/system/bin/catcommands', disabling 'catcom
mands'
<3>[   13.224914] init: cannot find '/system/bin/aplogd', disabling 'aplogd'
<3>[   13.255371] init: cannot find '/system/bin/vpnclientpm', disabling 'vpncli
entpm'
<4>[   13.404266] Mirror/redirect action on
<6>[   13.406616] warning: `rild' uses 32-bit capabilities (legacy support in us
e)
<6>[   13.562591] cpcap spi1.0: CPCAP uC: open status:0
<4>[   13.670227] u32 classifier
<4>[   13.670349]     Actions configured
<3>[   13.775695] init: service 'console' requires console
<6>[   13.782012] enabling adb
<6>[   13.798980] adb_open
<3>[   14.035430] init: untracked pid 1518 exited
<6>[   14.211822] request_suspend_state: wakeup (3->0) at 10175262464 (1970-01-0
1 00:01:37.868316612 UTC)
<3>[   14.213287] init: untracked pid 1527 exited
<6>[   18.037902] omap_ohci_bus_suspend Enter.
<6>[   18.448242] request_suspend_state: wakeup (0->0) at 14411682131 (1970-01-0
1 00:01:42.104736279 UTC)
<3>[   18.449707] init: untracked pid 1676 exited